DOCSLIB.ORG

2019 Rulebook

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2019 Rulebook 2019 RULEBOOK 2019 AMA Racing Rules Governing Pro/Am, Standard, ATV and Youth Competition An exclusive service to members of the American Motorcyclist Association The American Motorcyclist Association takes pride in its long record of achievement as the world’s largest sanctioning body for the sport of motorcycle competition. Since 1924 the objectives of the Association have been the same: to foster strong and fair competition, to provide reasonable guidelines for the various types of competition, and to provide an impartial competition program. The rules of competition are intended only as a guide for the conduct of the sport pursuant to uniform rules. Rules related to safety are made to make everyone concerned with safety. However, the AMA neither warrants safety if the rules are followed nor compliance with the enforcement of the rules. Moreover, each participant in competition has the responsibility to assess the safety aspects of facilities and conditions, and must assume the risk of competition. Recognized and non-recognized districts, and organizations within a district, must submit any temporary or locally appropriate supplemental regulations for approval by the AMA Racing Department. Supplemental regulations may not be in conflict with national rules. In the event of a protest or appeal, the judgment will be based on information contained in the AMA national rules. Contact the AMA at (800) 262-5646 for the address of your district office. The American Motorcyclist Association (AMA) prohibits discrimination in all of its programs and activities (including all AMA-sanctioned events) on the basis of race, color, national origin, creed, religion, sex, age, disability, veteran status, marital status, familial status, parental status, sexual orientation, or any other category protected by applicable state or federal law. HOW TO USE THESE RULES These rules are to be used for all types of AMA-sanctioned Amateur and Youth competition. These rules should be used in the following manner: 1. Become familiar with the definitions found in the glossary. 2. Know who may ride and how to determine their proper classification, which is found in each discipline chapter. 3. Equipment standards are listed in each discipline chapter and only apply to that chapter. 4. Chapter 1 begins with the rules that apply to Motocross followed by chapters for Off-road, and Track Racing. Special rules that pertain to each specific type of competition are listed in the appropriate chapter. A special rule takes precedence over the general rule when they differ. Example: The special rules for Observed Trials found in Section 2.3 of Chapter 2 are to be used with, and in addition to, the general rules at the beginning of the same chapter. 5. The youth rules are specific to each chapter and can be found in the proper sections of each chapter. 6. Each chapter has a section pertaining to ATVs and is to be used in addition to specific discipline rules where applicable. 7. Protest or appeal procedures are in Chapter 4. 8. Chapter 5 contains the appendices. 9. Any reference to a “motorcycle” also includes a supermini and minicycle unless noted otherwise. 10. New or changed rules will be in bold. 11. The 2019 rules are in effect as of Jan. 1, 2019. The electronic version on AMA website supersedes printed copy. Revisions or clarifications will be reflected in the 2019 Revision’s Chart on pg. 3. General questions regarding the rule book should be directed to [email protected]. TABLE OF CONTENTS WARNING: Motor vehicle mishaps, in competition or otherwise, can result in injury or death. Minors without parental consent or supervision should never use motor vehicles. Contents Page Chapter 1 Motocross ------------------------------------------- 5 1.1 Motocross Riders and Eligibility ----------------- 6 1.2 Motocross Equipment ----------------------------- 16 1.3 Motocross Meets ------------------------------------ 26 1.4 ATV Motocross Meets ----------------------------- 38 1.5 Motocross Pro-Am Meets ------------------------- 48 1.6 Vintage Motocross Meets ------------------------ 51 Chapter 2 Off-Road --------------------------------------------- 5 5 2.1 Off-Road Riders and Eligibility ------------------ 5 6 2.2 Off-Road Equipment ------------------------------- 66 2.3 Off-Road Meets ------------------------------------- 72 2.4 ATV Off-Road Meets ------------------------------ 81 2.5 Enduro Meets --------------------------------------- 91 2.6 Hare & Hound Meets ------------------------------ 104 2.7 Hare Scramble Meets ----------------------------- 105 2.8 Grand Prix Meets ----------------------------------- 107 2.9 Extreme Off-Road Meets ------------------------- 108 2.10 Observed Trials Meets ---------------------------- 111 2.11 Vintage Hare Scrambles Meets ----------------- 118 2.12 Vintage Observed Trials Meets ----------------- 120 Chapter 3 Track Racing --------------------------------------- 125 3.1 Track Racing Riders and Eligibility ------------- 126 3.2 Track Racing Equipment ------------------------- 131 3.3 Track Racing Meets -------------------------------- 140 3.4 ATV Track Racing Meets ------------------------ 152 3.5 Ice Race Meets ------------------------------------- 163 3.6 Hillclimb Meets -------------------------------------- 165 3.7 Supermoto Meets ---------------------------------- 178 3.8 Speedway & Speedway Long Track Meets - 184 3.9 Vintage Flat Track Meets ------------------------- 213 3.10 Vintage Road Racing Meets --------------------- 237 Chapter 4 AMA Disciplinary Code ------------------------- 259 4.1 Principles and AMA Disciplinary Bodies ----- 2 60 4.2 Offenses --------------------------------------------- 262 4.3 Equipment ------------------------------------------- 264 4.4 Penalties --------------------------------------------- 265 4.5 Protests and Appeals ----------------------------- 266 2 Contents Page Chapter 5 Appendices ----------------------------------------- 273 5.1 Points and Prizes ----------------------------------- 274 5.2 Sound Limits and Testing Procedures -------- 277 5.3 Recommended Tie Break Procedures -------- 280 5.4 Organizer Duties and Responsibilities -------- 281 5.5 Officials Duties and Authorities ----------------- 283 5.6 Assumption of Risk/Release & Waiver-------- 286 5.7 Abbreviations and Glossary ---------------------- 288 5.8 AMA Protest Form ------------------------------- --- 2 91 5.9 2019 Rules ------------------------------------------- 295 Chapter 6 AMA Policies --------------------------------------- 297 6.1 Substance Abuse Policy -------------------------- 298 6.2 Concussion Policy ---------------------------------- 310 6.3 Severe Weather Policy ---------------------------- 311 6.4 Alternative Ambulance Requirement Policy - 312 General questions regarding the rule book should be directed to [email protected]. 2019 Revision’s Chart The 2019 rules are in effect as of Jan. 1, 2019. Electronic version on AMA website supersedes printed copy. Section Contents Page Revisions or clarifications will be added in this chart on the online electronic version of the AMA Rulebook when necessary. The electronic rulebook version on the AMA website supersedes the printed copy. Copyright by the American Motorcyclist Association 2019. 3 Notes: ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ 4 Chapter 1 MOTOCROSS MOTOCROSS Section Motocross Page 1.1 Motocross Riders and Eligibility ---------------- 6 1.1.A General ----------------------------------------------- 6 1.1.B Motocross ------------------------------------------- 7 1.1.C Arenacross ------------------------------------------ 8 1.1.D Riders and Classifications ----------------------- 8 1.1.E National Advancement System ---------------- 10 1.1.F Entries ------------------------------------------------ 14 1.1.G Youth Riders and Eligibility ---------------------- 14 1.2 Motocross Equipment -------------------------- 16 1.2.A Approval of Motorcycles/Minicycles ----------- 16 1.2.B Limited Class Equipment Standards ---------- 17 1.2.C General Equipment Standards ----------------- 20 1.2.D Motorcycle Equipment Inspection ------------- 24 1.2.E Competition Apparel ------------------------------
Load more

Recommended publications
  • Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain Nicholas Haraus Marquette University
    Marquette University e-Publications@Marquette Master's Theses (2009 -) Dissertations, Theses, and Professional Projects Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain Nicholas Haraus Marquette University Recommended Citation Haraus, Nicholas, "Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain" (2017). Master's Theses (2009 -). 443. http://epublications.marquette.edu/theses_open/443 PERFORMANCE ANALYSIS OF A CONSTANT SPEED LOCAL OBSTACLE AVOIDANCE CONTROLLER USING A MPC ALGORITHM ON GRANULAR TERRAIN by Nicholas Haraus, B.S.M.E. A Thesis submitted to the Faculty of the Graduate School, Marquette University, in Partial Fulfillment of the Requirements for the Degree of Master of Science Milwaukee, Wisconsin December 2017 ABSTRACT PERFORMANCE ANALYSIS OF A CONSTANT SPEED LOCAL OBSTACLE AVOIDANCE CONTROLLER USING A MPC ALGORITHM ON GRANULAR TERRAIN Nicholas Haraus, B.S.M.E. Marquette University, 2017 A Model Predictive Control (MPC) LIDAR-based constant speed local obstacle avoidance algorithm has been implemented on rigid terrain and granular terrain in Chrono to examine the robustness of this control method. Provided LIDAR data as well as a target location, a vehicle can route itself around obstacles as it encounters them and arrive at an end goal via an optimal route. This research is one important step towards eventual implementation of autonomous vehicles capable of navigating on all terrains. Using Chrono, a multibody physics API, this controller has been tested on a complex multibody physics HMMWV model representing the plant in this study. A penalty-based DEM approach is used to model contacts on both rigid ground and granular terrain.
    [Show full text]
  • Analysis of the Rigid Multibody Tire
    Umea University A Thesis presented for the Bachelor Degree in Physics Analysis of the rigid multibody tire Ruben Yruretagoyena Conde supervised by Dr.Martin Servin February 12, 2018 Abstract A brief description of the multibody system mechanics is given as the first step in this thesis to present the dynamical equations which will be the main tool to analyze the two-body tire model. After establishing the basic theory about multibody systems to understand the main character in the thesis (the tire) all the physical components playing in the tire terrain interaction will be defined together with some of the developed ways and models to describe the tire rolling on non-deformable terrain and the tyre rolling on the deformable terrain. The two-body tire model definition and general description will be introduced. Using the tools acquired on the course of the thesis the dynamic equations will be solved for the particular case of the two-body tire model rolling on a flat rigid surface. After solving the equation we are going to find out some incongruences with respect to reality and then we are going to have a proposal to adjust the model to agree with real tires. Contents 1 Introduction 2 2 Theory 4 2.1 Multibody systems theory . 4 2.1.1 A brief introduction to Multibody systems . 4 2.1.2 Rigid body mechanics . 5 2.1.3 Dynamic equations for the multibody system . 13 3 The tire 17 3.1 The tire mechanics . 17 3.1.1 Preliminar definitions . 17 3.1.2 Tire-Terrain interaction.
    [Show full text]
  • Source 2015 PROGRAM and PROCEEDINGS
    source SCHOLARSHIP FOR LEARNING. SCHOLARSHIP FOR LIFE. program & proceedings m of posiu univ ym er s si ty r e s e a r c h a n d c r e a t i v e e x p r e s s i o n . Thursday, May 21, 2015 source 2015 PROGRAM AND PROCEEDINGS SYMPOSIUM OF UNIVERSITY RESEARCH AND CREATIVE EXPRESSION (SOURCE) 20TH ANNUAL CONFERENCE MAY 21, 2015 rating 20 years celeb OF EXCELLENCE IN RESEARCH, SCHOLARSHIP, AND CREATIVE ACTIVITIES CENTRAL WASHINGTON UNIVERSITY SPONSORED BY School of Graduate Studies and Research Student & Activities Fees Office of the Provost College of Arts and Humanities College of Business College of Education and Professional Studies College of the Sciences James E. Brooks Library William O. Douglas Honors College Student Success The Wildcat Shop Copy Cat Shop Multimodal Education Center Office of Enrollment Management A SPECIAL THANKS TO OUR COMMUNITY SPONSORS The Boeing Company Washington State Opportunity Scholarship United Faculty of Central Domino’s Pizza Kittitas County Event Center source 2015 CONTENTS SOURCE 2015: Goals of the Symposium .......................................................................................... 4 President’s Welcome ....................................................................................................................... 5 Manastash 2015 Literary Arts Magazine Cover ............................................................................... 6 Museum of Culture & Environment ............................................................................................... 7 Sarah Spurgeon
    [Show full text]
  • Price List Date and Number 31Aug2015, C13
    SEQ. #411-315 STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Vendor Name: Deere & Company Contact Person Tamara Hebert Street Address: 2000 John Deere Run P.O. Box: City, State, Zip Cary, NC 27513 Phone #: 800-358-5010, option 2 Toll Free #: 800-358-5010, option 2 Fax #: 309-749-2313 Email Address: [email protected] Website: www.johndeere.com PRICING METHOD 2 - PERCENTAGE DISCOUNT OFF LIST 1.0 Riding Mower Catalog Section Price List Title and date Z900B Series and Z900M Series - 36 Months or 1200 Hours, whichever comes first. First 24 Months, No Hour Limitation; Z997, Z900R Series - 36 Months or 1500 Hours, whichever comes first. First 24 Warranty Months, No Hour Limitation. Percentage Discount to be applied to Price List 22% Discount Date & Price List I.D. Number C13_20150831_edited Z915B, Z920M - $85.94; Z925M EFI, Z925M Flex Fuel, Z930M EFI - $117.87; Z930M - $77.30; Z950M, Z960M - $84.40; Z920R, Z930R, Z950R, Z970R - Price for Set of Fluid and Air Filters $111.13; Z997R - $91.88 Operator manuals provided at no cost. Prices are for set of parts and repair manuals. Z915B, Z900R Series, Z900M Price for Set of Repair, Parts and Operating Manuals Series - $105; Z997 - $115 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED Location of delivering John DELIVERY STARTING POINT - City, State, Zip Deere dealer Price per loaded mile $4 2.0 NEW EQUIPMENT RENTAL PROGRAM - SUMMER RATES - 4/1 THRU 9/30 If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate.
    [Show full text]
  • Tyre Dynamics, Tyre As a Vehicle Component Part 1.: Tyre Handling Performance
    1 Tyre dynamics, tyre as a vehicle component Part 1.: Tyre handling performance Virtual Education in Rubber Technology (VERT), FI-04-B-F-PP-160531 Joop P. Pauwelussen, Wouter Dalhuijsen, Menno Merts HAN University October 16, 2007 2 Table of contents 1. General 1.1 Effect of tyre ply design 1.2 Tyre variables and tyre performance 1.3 Road surface parameters 1.4 Tyre input and output quantities. 1.4.1 The effective rolling radius 2. The rolling tyre. 3. The tyre under braking or driving conditions. 3.1 Practical brakeslip 3.2 Longitudinal slip characteristics. 3.3 Road conditions and brakeslip. 3.3.1 Wet road conditions. 3.3.2 Road conditions, wear, tyre load and speed 3.4 Tyre models for longitudinal slip behaviour 3.5 The pure slip longitudinal Magic Formula description 4. The tyre under cornering conditions 4.1 Vehicle cornering performance 4.2 Lateral slip characteristics 4.3 Side force coefficient for different textures and speeds 4.4 Cornering stiffness versus tyre load 4.5 Pneumatic trail and aligning torque 4.6 The empirical Magic Formula 4.7 Camber 4.8 The Gough plot 5 Combined braking and cornering 5.1 Polar diagrams, Fx vs. Fy and Fx vs. Mz 5.2 The Magic Formula for combined slip. 5.3 Physical tyre models, requirements 5.4 Performance of different physical tyre models 5.5 The Brush model 5.5.1 Displacements in terms of slip and position. 5.5.2 Adhesion and sliding 5.5.3 Shear forces 5.5.4 Aligning torque and pneumatic trail 5.5.5 Tyre characteristics according to the brush mode 5.5.6 Brush model including carcass compliance 5.6 The brush string model 6.
    [Show full text]
  • Design Method Development for the Design of Traction Systems Avinash Kolla Clemson University, [email protected]
    Clemson University TigerPrints All Theses Theses 8-2010 Design Method Development for the Design of Traction Systems Avinash Kolla Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Part of the Engineering Mechanics Commons Recommended Citation Kolla, Avinash, "Design Method Development for the Design of Traction Systems" (2010). All Theses. 929. https://tigerprints.clemson.edu/all_theses/929 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. DESIGN METHOD DEVELOPMENT FOR THE DESIGN OF TRACTION SYSTEMS A Thesis Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements for the Degree Master of Science Mechanical Engineering by Avinash Kolla August 2010 Accepted by: Dr. Joshua D. Summers, Committee Chair Dr. Sherrill Biggers Dr. Paul Joseph ABSTRACT The objective of this research is to develop a design method for rapid exploration of traction concepts primarily for off-road vehicles. Different approaches available to achieve this objective are discussed and compared, such as computational, analytical, and physical methods. Computational approaches are based on simulations performed using Finite Element Method (FEM), Discrete Element Method (DEM), and combined Finite Element-Discrete Element (FE-DE) methods. Analytical approaches are based on closed form mathematical models developed by previous researchers based on the theory of plasticity. Physical approaches include fabrication and testing of prototypes at different levels of abstraction. This thesis compares these different approaches to design with respect to design process requirements of (1) timeliness, (2) cost, (3) required expertise, (4) accuracy of results, (5) flexibility to adapt to new designs and (6) stage of design process.
    [Show full text]
  • Low Pressure Revolution
    2005 ISSUE BONUS Vol. XVIV, No. 6 November-December 2004 Comitted to Ecological Backcountry Travel Since 1984 FOURWHEELING ACADEMY FOURWHEELING ACADEMY RANCHO Low Pressure RS99700 Revolution NEW REMOTE CONTROL PANEL AND FITTINGS FOR RANCHO RS9000X SERIES SHOCKS EDITOR'S NOTE:The Ol' Coyote is pretty slow on social things. For By Harry Lewellyn years I've been doing these articles with the If you have been on many of my tours, help of friends, but you’ll know that you regularly get the seldom have provided Rancho 9000X cab adjustment pitch when proper credit. “From the we hit the washboard. I typically let you Coyote” on page 2 know that via the remote control, I can sig- thanks the players. They nificantly smooth out the annoying ride by deserve recognition. adjusting my shocks to maximum soft from within the cab, while moving. The annoying “brrrit” (trill your tongue) all but goes away. What’s new is that Rancho has By Harry Lewellyn changed the control panel, pump and tub- ing, and gone to easier, more secure snap Staun Products' Internal fittings. BeadLock™ is creating a low I’ll start in the cab, run you through tire pressure revolution. Words the firewall and out to the pump, and final- alone don't do this product jus- ly, to the shocks. Figure 1 Staun’s Internal, pneumatic BeadLock™ tice. Even if you don't read the RS99700 KIT entire article, take a look at the was awarded “Best Product Under $250” in 2004 by The kit has everything including new pictures. They are very impres- Australia’s 4WD Monthly magazine.
    [Show full text]
  • Annual Report 2005 Michelin Energy E3A the Benchmark for Low Rolling Resistance, the Michelin Energy E3A Range of Tires Delivers 3% Fuel Savings for Passenger Cars
    Annual Report 2005 Michelin Energy E3A The benchmark for low rolling resistance, the Michelin Energy E3A range of tires delivers 3% fuel savings for passenger cars. The third generation of this tire family, Michelin Energy E3A also delivers a 10% improvement on grip and 20% more mileage than the previous range. 1895 For the Paris- Bordeaux-Paris race, 2005 Michelin built and Michelin and its partners won drove the Eclair, all the World Champion titles: the first car ever fitted • Formula 1 World Champion with pneumatic tires. • Rally World Champion • 24 Hours of Le Mans Champion • MotoGP World Champion • and MBT World Champion Because, in 2005 as in 1895, Michelin placed innovation at the heart of its development. Today’s world No.1 tire manufacturer with 19.4%* market share, Michelin is at the forefront of all tire markets and travel-related services thanks to the quality of its product offering. Michelin is undisputed leader in the most demanding technical segments and designs forward-looking solutions to help the road transportation industry in its bid to improve competitive edge and to meet modern societies’ ever more pressing needs for safety, fuel efficiency and respect for the environment. To further strengthen its position and performance, Michelin pursues a global, targeted growth strategy focusing on high value-added segments and on expansion in the higher-growth markets, while improving its productivity across the board. * Accounting for 19.4% of world tire sales according to Tire Business, August 29, 2005. In a nutshell, its mission is to promote its values of Respect for Customers, People, Shareholders, the Environment and Facts in contributing to mobility enhancement of both goods and people.
    [Show full text]
  • Wheels & Tires
    WHEELS & TIRES NEW PRODUCTS wheels & tires HELMETS & APPAREL ATV/UTV Accessories Motorcycle Accessories hot rods, pivot works, hotcams, cyclinder works & vertex pistons Chains, Sprockets, drive & Brakes Engine & PISTONS Electrical & Batteries dvd Specialty Tools PWC 1-800-661-9653 [email protected] Maverick Distributing 2012/2013 7 WHEELS & TIRES MUD LITE AT & XL NEW uAT: 3/4-in. lug; XL: 11/8-in. lug. PRODUCTS uExtended-wear rubber compound for even longer life and better value! uRevolutionary all-conditions tire: it’s a 6-ply mud tire that’s wheels & tires designed for the trail, a trail tire that slings mud with the best of them! uUnique center tread contact area provides a smooth, radial-like ride. helmets & uPerhaps best of all, the Mud Lite is priced right. Shop and apparel compare—you won’t find a tire that’s lighter, tougher or more capable at such a reasonable price! ATV/UTV MUD LITE AT: 3/4” LUG Accessories PART# SIZE PRICE 1/8 ITP56A387 22X11X8 $129.07 MUD LITE XL: 1 ” LUG ITP56A388 22X11X9 $130.94 PART# SIZE PRICE Motorcycle ITP56A373 25X12X9 $146.93 ITP560431 25X12X11 $177.65 Accessories ITP56A3A8 22X8X10 $108.35 ITP560363 25X8X12 $122.08 ITP56A3A5 22X11X10 $134.54 ITP560364 25X10X12 $146.02 hot rods, pivot ITP56A326 23X8X10 $113.25 ITP560432 25X12X12 $169.94 works, hotcams, cyclinder works ITP56A327 23X10X10 $126.61 ITP56A3P6 26X9X12 $157.42 & vertex pistons ITP56A305 24X11X10 $134.69 ITP56A343 26X10X12 $145.97 ITP56A308 25X11X10 $146.19 ITP56A361 26X12X12 $161.87 Chains, ITP56A380 27X9X12 $172.64 Sprockets,
    [Show full text]
  • 2013-2015 Research Report
    Offi ce of 2013–2015 Maintenance STATEWIDE BIENNIAL Maintenance Operations Research Report DISCLAIMER Trade names are used on occasions in this report to better identify the type or use of a product or material involved in field research. However, use of these names in no way implies Minnesota Department of Transportation’s (MnDOT) endorsement of the product or material discussed unless there is a specific MnDOT recommendation to that effect. No attempt was made to identify which product or material had registered trade mark associated with it. ACKNOWLEDGMENTS The Maintenance Operations Research program is able to make a significant impact on the efficiency, safety, and cost of state maintenance operations. Many thanks to the Area Maintenance Engineers and District champions for their enthusiastic involvement. We sincerely appreciate these contributions, as well as the strong support of MnDOT’s Office of Maintenance in advancing technology implementation. Thanks very much to all who contributed content to this biennial report, including writing summaries, submitting photographs and compiling data. For more information, please visit: Minnesota Department of Transportation: http://www.dot.state.mn.us/ MnDOT Office of Maintenance Research Unit: http://www.dot.state.mn.us/maintenance/research.html MnDOT Research Services Section: http://www.dot.state.mn.us/research/index.html MnDOT Library: http://www.dot.state.mn.us/library/ Offi ce of Maintenance STATEWIDE BIENNIAL Maintenance Operations Research Report 2013–2015 Prepared by CTC & Associates LLC and shu shu design September 2015 © Minnesota Department of Transportation CONTENTS Introduction ....................................................... 1 About the Program ................................................. 2 History. 2 Goals and objectives ....................................................2 Research Unit Staff ......................................................3 NTREC members ........................................................3 Project Funding & Selection ........................................
    [Show full text]
  • Mitas Tire Mimics a Track
    Farm King’s new “Propeller series” snowblower comes with aggressive propeller blades Mitas PneuTrac tire looks like it’s fl at, but rides smoother than conventional tires in mounted on a paddle-style auger to cut through hard-packed snow. rough fi eld conditions, says the company. “Paddle” Snowblower Cuts Mitas Tire Mimics A Track Tires that look like they’re running fl at but operators who spend long hours in the fi eld Through Hard-Packed Snow aren’t really turned farmer’s heads at the 2015 in rough conditions. The smoother ride may We spotted Farm King’s new Propeller Series down larger pieces of snow as it enters the Farm Progress Show in Illinois. That’s where also reduce wear on the machines, he says. 3-pt. mounted snowblower this fall at the machine and moves toward the fan, providing the Mitas PneuTrac made its working debut Two PenuTrac sizes are undergoing Ohio Farm Science Review show. a smoother fl ow of snow into the fan. on a Case IH Maxxum tractor. PneuTrac extensive fi eld testing in Europe: 280/70 R18 What sets the snowblower apart is its Propeller Series snowblowers are available 28-in. tires were mounted on the front with and 600/65 R38. The company says when aggressive new propeller blades mounted in cutting widths from 50 to 120 in. and 38-in. PneuTracs on the rear. the product is released for sale – hopefully on a paddle-style auger. According to the cutting heights from 24 to 41 in. A driving demonstration paired the in 2016 – that it will produce the new tires company, the design maximizes performance Contact: FARM SHOW Followup, Farm PneuTrac tractor with a conventionally- in its Charles City, Iowa plant.
    [Show full text]
  • Mud Sling 3Rd Annual Run – a – Muck
    VIRGINIA MOTOR SPEEDWAY MUD BOG – MUD SLING 3RD ANNUAL RUN – A – MUCK Location: U.S. RT 17, 20 miles South of Tappahannock, VA, 8 Miles North of Saluda, VA at Virginia Motor Speedway. Gates Open: 9am Registration: 9am – 11am (Stock / Modified); X – XX by 2:00pm Drivers Meeting: 12:30pm (Stocks / Modified); X – XX 2:30pm Race Starts: 12pm (Noon) Single Eliminations Stocks / Modified / Tractor Tire will run Bog Pit; X – XX will run Sling Pit. Bog: Hole, Hill, Hole. Sling Track: 6 to 12 inches of mud. Admission: Adults: $10, Children 7 – 17 yrs old: $8; Children 6 and Under: FREE Registration Fees: Stock A, B: $25.00; Modified A, B, C: $35.00; X – XX: $40.00; Tractor Tire: $35.00. Coolers Allowed, NO Glass For More Info call (804) 758-1867 or visit www.vamotorspeedway.com TRUCK / CLASS RULES Class: Stock A, B 1st Place – Trophy and $200.00 Cash Payout 2nd Place – Trophy and $100.00 Cash Payout 3rd Place – Trophy and $50.00 Cash Payout Class A Stock: 0 – 36 inch tires Class B Stock: 37 – 40 inch tires 1. Stock Frame. 2. Factory location for Engine, transmission, transfer case, front and rear axle. Motor must match make of vehicle. 3. No Gutted Truck (may cut fenders for tire clearance) 4. Suspension Lift permitted. IFS to straight axle conversion o.k., must keep factory wheel base, must be leaf spring conversion. (No coil over conversions) 5. D.O.T. Tires ONLY. No Cut or Paddle Tires allowed. 6. No Blowers, turbo or NOS. (Turbo Diesel permitted) 7.
    [Show full text]