NEW DESIGN CAST FRAME FOR MAXIMUM PRECISION Tormek Jig Solutions Included with the Tormek T-8

SVM-45 Knife Jig SE-77 Square Edge Jig For most knives. Jig width 45 mm For plane irons and wood chisels. (1¾"). Long knives need to be stiff. Max tool width 77 mm (3"), max tool Minimum blade length 60 mm (23/8"). Get top results with thickness 9 mm (3/8"). Safety stops prevent Also for carver’s draw knives. the tool from slipping off the stone. UPGRADED (SE-77 replaces SE-76.) For small knives see SVM-00 under Accessories a real sharpening system SVM-140 TT-50 Truing Tool Long Knife Jig Trues the grindstone exactly round and Suitable for long and flexible knives. flat. Guided by the Universal Support, The 140 mm (5½") width of the jig which also guides the jigs. Dual knobs stabilizes a thin blade. Minimum for smooth feed across the stone. blade length 160 mm (6¼").

SVX-150 SP-650 Stone Grader Scissors Jig Square The fine side grades the stone for a 1000 Universal Support For scissors of all sizes and shears. Edge Jig grit finish. The coarse side of the grader • For vertical or horizontal mount. Also suitable for portable electric Dimensions reverses the stone to normal fast grinding. • Micro adjust with scale for each 0.25 mm (0.01"). hand planer blades. Width 270 mm (105/8") Activates a glazed stone. Depth 270 mm (105/8") Height 330 mm (12") SVA-170 Axe Jig Leather Honing Wheel Weight WM-200 AngleMaster For carving and carpenter’s axes. Shipping weight 18.2 kg (40.1 lbs) Sets and measures the edge angle. Adjust- Max height of axe 170 mm (6½"). Safety Stop Machine only 14.8 kg (32.6 lbs) able to any stone diameter from ∅ 250 mm Copes with both straight and (10") down to ∅ 150 mm (6"). Measures curved edges. Grindstone from 10° to 75°. Magnets keep it in place. Tormek Original Tormek Original Grindstone Grindstone SG‑250, Aluminium oxide SVS-38 Short Tool Jig Developed to combine ∅ 250 × 50 mm (10" × 2") PA-70 Honing Compound For straight shanked carving gouges efficient steel removal, 90 rpm, torque 14.7 Nm For application on the leather honing TORMEK T-4 is a further development of the smooth surface finish and V-tools down to 45 mm (1¾") length. Leather Honing Wheel wheels. Grain size 3 micron (average). and long life. 220 grit. T-3 model taking the precision and stability to a Short wood chisels and tools for power ∅ 220 × 31 mm (85/8" × 1¼") Removes the burr and polishes the carvers. Max tool width 38 mm (1½"). Can be graded with edge to a mirror finish. completely new level. Vital functions like the motor SP‑650 for a 1000 Main Shaft grit surface. Stainless steel main shaft, and the main shaft are mounted in the zinc cast stone hardware and EzyLock. SVD-186 Gouge Jig Oil for the Honing Wheel is included top which includes the integral sleeves for the For fingernail shaped turning gouges of Housing + Owner’s Handbook and DVD, please see other side! Universal Support. This advanced design ensures any geometry. Plus shaft for turning cut- Zinc cast top and frame. ters. Also for bent carving gouges and Sides in ABS plastic. an unbeatable precision for the Universal Support, V-tools. Max tool width 36 mm (13/8”). which is the foundation of the Tormek jig system. UPGRADED (SVD-186 replaces SVD-185.) Motor Optional Accessories Industrial single phase 200 W (input) 230 V, 50 Hz or You get a high quality machine ideal for home and SVS-50 Multi Jig SVM-00 Small Knife Holder Stainless Steel Shaft 115 V, 60 Hz, Continuous duty For turning skew chisels, parting Enables you to sharpen the smallest hobby work which can sharpen all the common with EzyLock PAT PEND Maintenance free and beading tools and roughing knife blades like carving knives and Easy and instant Silent running, 54 dB edge tools. Delivered with the Stone Grader SP‑650, gouges. Straight carving gouges pocket knives. Works in conjunction locking and unlocking 25,000 hour life up to 50 mm (2") width. with the SVM-45 jig. AngleMaster WM-200, Honing compound, DVD by hand. and the comprehensive Tormek Handbook on PATENT PENDING sharpening. Complement the T-4 with your choice SVD-110 Tool Rest Advanced Water Trough TTS-100 Turning Tool Setter For turning scrapers, hollowing tools with screw lift, magnet, Replicates the geometry on turning of jigs according to the tools that you are to sharpen. water chute and scrape and thin parting tools. Also for cabinet gouges and skews when using the (The jigs are sold separately). scrapers, screwdrivers and spoke Built-in magnet for swarf SVD-186 and SVS-50 jigs. shave blades. collection and attachable With built in edge geometries. chute to catch every drip. Dimensions Housing Width 230 mm (91/16") Zinc cast top SVH-320 Planer Blade Attachment LA-120 Profiled Honing Wheels Depth 200 mm (77/8") Impact resistant ABS plastic For blades of any length. Blades longer AngleMaster For the inside honing and polishing of Height 260 mm (10¼") than 270 mm (10½") are relocated in ­turning/carving gouges and V-tools. Motor the blade holder. Min width of blade Set of two discs, one with a 3 mm (⅛") Weight Industrial single phase 13 mm (½"). radius and one with a 60° tip. Shipping weight 9.8 kg 120 W (input) Machine only 8.0 kg 230 V, 50 Hz or 115 V, 60 Hz THE MOST ADVANCED WATER COOLED SHARPENING SYSTEM AVAILABLE allows you sharpen For narrow tools complement with LA‑124 Duty 30 min/hour 3/32 Grindstone SVP-80 Moulding Knife Attachment with 2 mm ( ") radius and a 45° tip. Maintenance free your tools to the finest edge. Tormek’s innovative sharpening system has come to be appreciated worldwide MH-380 Tormek Original Grindstone For all makes and shapes of moulding Silent running, 54 dB Aluminium oxide knives with 24, 30 or 38 mm distance for its unbeatable versatility, accuracy and ease of use. T-8 maximises the precision thanks to the revolutionary Machine Cover 10,000 hour life ∅ 200 × 40 mm (8" × 15/8") between guide hole centres. Max width For protecting the machine from shavings fully cast housing which guarantees minimal play for the Universal support. This gives you the best conditions 120 rpm, torque 8.4 Nm of blade 100 mm (4"). and wood dust. 100 % cotton. possible to succeed with your sharpening. Leather Honing Wheel ∅ 145 × 26 mm (5¾" × 1") DBS-22 Drill Bit Sharpening Attachment Tormek’s unique drive system is efficient and manages to hold a constant speed, even under full load. The Tormek RB-180 Rotating Base Main Shaft Sharpens drill bits to a 4-facet point. Enables you to easily rotate the machine 180° Stainless steel main shaft Can be set at any angle between 90° Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated and lock it with complete stability. It makes it and stone hardware. and 150°. The optimal clearance angle details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient easy to alternate between sharpening/ honing EzyLock in composite. can be set for each drilling operation. or sharpening towards or away from the edge. 7/64 7/8 Drill size 3–22 mm ( "– "). cleansing. Read more at www.tormek.com! Fits models: T-8, T-7, T-4, T-3, 2000 and 1200. • Rubber Jig and Accessory Kits Price often indicates quality, and we certainly found that to Work Mat be true in wet sharpeners. Tormek’s heavy-duty T-7 proved RM-533 • Centralized HTK-706 Hand Tool Kit see below. impossible to stall, no matter how hard we pressed on the tool key locking This kit is ideal for sharpening during sharpening; none of the lower-priced units hand tools around the workshop • Scratch and home. Contains: Knife Jig even came close. Its tool-holding system (tool rest resistant • Drawers to fit Sharpen all your edge tools SVM-45, Small Knife Holder and holders) fit together like hand in glove and gave metallic SVM-00, Long Knife Jig SVM-140, Tormek kits With the wide range of Tormek patented jigs, us dead-on bevels and square ends with little fuss. surface Scissors Jig SVX-150, Short Tool you can sharpen practically all types of edge tools. Jig SVS-38 and Axe Jig SVA-170. • Auto-return Dave Campbell with John Olson soft close Tormek is dedicated to developing water cooled WOOD Magazine, USA drawer function sharpening through innovative solutions! TNT-708 Woodturner’s Kit A comprehensive kit for the I have yet to find anything that cannot be sharpened on the • Aluminium Exact replication handles woodturner. Contains: Gouge Jig Tormek. The honed edge is incredibly fine, and coupled to this • Holes The key word when sharpening the Tormek way is SVD-186, Multi Jig SVS-50, Tool for hooks dramatic improvement in edge quality is the not insignificant fact repeatability. You can shape the tool exactly to your Rest SVD-110, Turning Tool Setter • Fully TTS-100, Profiled Honing Wheel that the tools will last far longer, as the sharpening process is so • Rubber extendable needs. Even complicated shapes such as fingernail LA-120, Machine Cover MH-380, much less aggressive. I am now a total convert to the wet feet to drawers turning gouges, spoon carving gouges and oval skew TNT-300 DVD and manual. grinding system. It really is Touch and Turn, but protect chisels with a radiused edge are easily sharpened. the floor you touch far less often and turn far more! • Adjustable legs for Cleanest edges Special Grindstones Alan Holtham comfortable working height You finish the sharpening process by honing and The Woodworker, UK polishing the edge on the leather honing wheel. Blackstone Silicon SB-250 You get a razor sharp edge. Tormek Blackstone delivers faster TS-740 Sharpening Station steel removal on HSS and other exotic alloys than Tormek Original Top quality sharpening cabinet with purposed designed drawers to Fast sharpening Grindstone. Suitable for tools with fit the Tormek accessory kits. Convenient storage for all the jigs and Once the shape is created, you remove only a fraction of large bevel area. It can also touch Buying a Tormek is a safe investment in quality accessories needed for sharpening all kinds of edge tools. Sturdy steel the steel when re-sharpening, which makes it a quick job. up carbide. 220 grit. design with scratch resistant metallic coating, rounded corners and and performance. You will never have to put up Tormek logo. Fits easily into your workshop and you will be able to adjust to your ideal working height. Height 750–830 mm (29½"–32½"), Full control Japanese Waterstone with dull tools ever again! width 578 mm (22¾"), depth 390 mm (153/8"). At the low speed, you have full control of the sharpening SJ‑250 and SJ-200 and remove no more steel than necessary. An extra This stone provides an extra fine Custom made drawers surface finish on hand tools where benefit is that your tools last longer. Supplied complete with the Tormek a minimum of steel removal is drawer inserts for the accessories that needed. Ideal for carving tools. comes with the machine, for the Hand No risk of overheating 4000 grit. Tool Kit and for the Woodturner’s Kit. There is no risk that the edge becomes Available in two sizes, 250 mm (for (Accessories and jigs not included.) overheated and loses its hardness. T-8, T-7 and 2000 models) and Three extra drawers with practical 200 mm (for T-4, T-3 and 1200 rubber matting. Safe and quiet models). Since it is made to create the finest surface, it has a limited Worn steel particles are deposited into the water trough, steel removal capacity and cannot keeping the air clear of grinding dust. No sparks are be used for shaping a tool. Side Storage produced that can be a fire hazard in workshops with If you work with the special stones you a lot of wood dust. You will also find that the Tormek can easily store them on the side of runs surprisingly quietly. the station. Two hooks are included. How to go about it? Quality and performance Handbook and films for reference Buying a Tormek is a safe investment in quality and Rubber Work Mat RM-533 The appreciated Tormek handbook explains the basics of edge tool performance with a 7-year warranty. sharpening, gives you useful tips and an easy, step by step approach With the Tormek Rubber Work Mat you to the Tormek method of sharpening. It is delivered with each Tormek get a water proof yet non slip surface. machine together with the Tormek DVD. The raised rim will retain any water spillage. 533 × 343 mm (21"×13½" )

THE

YOUR TORMEK DEALER: Stig Reitan, ULTIMATE Tormek Sweden SHARPENING TNT-300 Woodturner’s Instruction Box Contains TNT DVD film and detailed Hand- book. Shows how to shape, sharpen and hone all your turning tools. (Sold separately 9052-1611 EN SYSTEM or as part of the TNT-708 kit.) www.tormek.com