Precision Tools

1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 3.2 mm 3.2 mm 3.2 mm Rod Dia. 3 6 9 3 6 9 3 6 9 3 6 9 3 6 9 3 6 9 3 6 9 3 6 9 3 6 9 12 12 12

No. Rods 3" 3" 3" 3" 4" 4" 4" 4" 6" 6" 6" 6" Base 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 75 mm 75 mm 75 mm 100 mm 100 mm 100 mm 150 mm 150 mm 150 mm 63.5 mm 63.5 mm 63.5 mm 0-3" 0-6" 0-9" 0-3" 0-6" 0-9" 0-3" 0-6" 0-9" 0-3" 0-6" 0-9" 0-3" 0-6" 0-9" 0-12" 0-12" 0-12" Range 0-75 mm 0-75 mm 0-75 mm 0-75 mm 0-150 mm 0-225 mm 0-150 mm 0-225 mm 0-150 mm 0-225 mm 0-150 mm 0-225 mm

247 •Ring-type lock nut for quick and sure locking •Ring-type lock nut for quick and sure locking No. 440 Series 0-9" No. 440 Series 0-225 mm No. 440M Series No. 445 Series 0-12" mm No. 445M Series 0-225 to .001" or 0.01 mm with these fine slots, shoulders, and projections can be measured The depths of the holes, tools. (3.2 mm) diameter measuring rods. furnished with a 2 1/2" (63.5 mm) base and 1/8" The No. 440 gages are mm), and 6" (150 mm) bases and have 5/32" furnished with choices of 3" (75 mm), 4" (100 The No. 445 gages are rods. (4 mm) diameter measuring Includes these features: adjustment and speeder for uniform pressure and quicker • The combination ratchet For Technical Advice Contact a John Day Company Representative John Day Company Representative 445DZ-6RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445DZ-9RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT NUT 445DZ-12RL, 12" DEPTH GAGE W//RACHET STOP & LOCK NUT 440MZ-75RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT 440MZ-150RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 440MZ-225RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MAZ-75RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MAZ-150RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MAZ-225RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MBZ-75RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MBZ-150RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MBZ-225RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MDZ-75RL, 3" DEPTH GAGE W//RACHET STOP & LOCK 445MDZ-150RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445MDZ-225RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT Description 440Z-3L, 3" DEPTH GAGE W/LOCK NUT 440Z-6L, 6" DEPTH GAGE W/LOCK NUT 440Z-9L, 9" DEPTH GAGE W/LOCK NUT 440Z-3RL, 3" DEPTH GAGE W/RACHET STOP & LOCK NUT 440Z-6RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 440Z-9RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT 445AZ-3RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT 445AZ-6RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445AZ-9RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT NUT 445AZ-12RL, 12" DEPTH GAGE W//RACHET STOP & LOCK 445BZ-3RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT 445BZ-6RL, 6" DEPTH GAGE W//RACHET STOP & LOCK NUT 445BZ-9RL, 9" DEPTH GAGE W//RACHET STOP & LOCK NUT NUT 445BZ-12RL, 12" DEPTH GAGE W//RACHET STOP & LOCK 445DZ-3RL, 3" DEPTH GAGE W//RACHET STOP & LOCK NUT At 800-488-9699 or visit www.johnday.com

STAR 52245 STAR 52249 STAR 52253 STAR 52213 STAR 52217 STAR 52221 STAR 52225 STAR 52229 STAR 67119 STAR 52116 STAR 52120 STAR 52124 STAR 52209 STAR 67118 STAR 52244 STAR 52248 STAR 52252 STAR 52216 STAR 67117 STAR 52220 STAR 52224 STAR 52228 STAR 52119 STAR 52123 STAR 52208 STAR 52212 STAR 52113 STAR 52117 STAR 52121 STAR 52115 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Depth Micrometers Depth - Depth Micrometer

Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Uni-Mike (Series317,117)-InterchangeableAnvilType Micrometer -Outside(436Series) Outside Micrometers MTI 117-108 MTI 117-107 MTI 317-712-30 MTI 317-711-30 PartNo STAR 68029 STAR 68023 STAR 68017 STAR 68010 STAR 68002 STAR 67993 PartNo MICROMETER 1-2".0001"UNI MICROMETER 0-1".0001UNI MICROMETER 1-2".00005"/.0001mm MICROMETER 0-1".00005"/0.001mm Description 436RL-6 STARRETT5-6" 436RL-5 STARRETT4-5" 436RL-4 STARRETT3-4" 436RL-3 STARRETT2-3" 436RL-2 STARRETT1-2" 436RL-1 STARRETT0-1" Description •Deluxe paddedcaseavailablebyorderingNumber910 •1 Inchand25Millimetersmodelssentinfittedcase •Starrett workmanship •Quick andeasyadjustment •Micro-lapped measuringfaces •Extremely hardandstableone-piecespindle(theheartofouraccuracy) •Rigid one-piecesteelframeribbedforextrastrengthonsizesthrough6Inch(150Millimeters) Accuracy andLong-Life: •Gracefully designedtaperedframeforuseinnarrowslotsandtightplaces •A plainmicrometerthatdependsonyourown"feel" •Combination ratchetandspeederforuniformpressure •Smooth frictionthimbleforuniformpressure •Ring-type knurledlocknutforquickandsurelocking •Balanced frameandthimbledesigninsureeasyhandling Ease-of-Handling •Convenient decimalequivalentsonone-inchmicrometers •Advanced sleevedesignwithstaggeredlinesanddistinctfiguresforpreciseeasyreadability •Starrett satinchromefinish-noglareresistsrust Readability: •They areaccurate,rugged,andeasytouse •These arethemostpopularprecisionmicrometersusedbyskilledworkmenworldwide • The317seriesprovidesdigitalreadoutto.00005"/0.001mmandcan belinkedtotheSPC • Measurestubethickness,shoulder-edgedistance,rivetheadheight,etc.withinterchangeable Features: micrometer. Thedischasalapped, mirrorsurface. With specialDiscAnvil950758(showninphoto).TheUni-Mikeis usedasaheight • Parallelism:.00012"/3um Bottom ofbase:.00008"/2um Measuring faceofspindle:.000024"/0.6um • Flatness: Accuracy: • DigimaticfunctionssameastheOutsideMicrometerseries 293. system. anviles (flatanvil,rodV-anvil). 248 Friction ThimblewithFlat&RodAnvilsplusStandard Friction ThimblewithFlat&RodAnvils with FlatandRodAnvilsplusStandard with FlatandRodAnvils Remarks Grad. In. .001 .001 .001 .001 .001 .001 Range In. 5 -6 4 -5 3 -4 2 -3 1 -2 0 -1

Precision Tools Remarks Friction Thimble Friction Thimble with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Friction Thimble Remarks No Ratchet Stop. Ratchet Stop type Ratchet Stop type Friction Thimble type Friction Thimble type Ratchet stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard Ratchet Stop type with Standard No Ratchet Stop. No Spindle Lock. Friction Thimble type with Standard Friction Thimble type with Standard No Ratchet Stop. No Spindle Lock. No Standard No Ratchet Stop. No Spindle Lock. No Standard. No Ratchet Stop. No Spindle Lock. No Standard. No Ratchet Stop. No Spindle Lock. No Standard. ±.0001" ±.0001" ±.0001" ±.0002" ±.0002" ±.0002" ±.0001" ±.00015" ±.00015" ±.00015" ±.00025" ±.00025" ±.00025" Accuracy Among the many types listed, the 103 Series is the workhorse of the 103 Series is the workhorse many types listed, the Among the or 300mm, most of the 103 Series micrometers micrometers. Up to 12" with a standard bar. The standard is not are automatically supplied larger than 13". The 103 Series micrometer supplied for the micrometers or .0001" graduation. sets are available with .001" Features: • Carbide Faces. • Positive locking clamp. Thimble for exact repetitive readings. • Ratchet stop or Friction frame. • Baked-enamel-finished satin-chrome finish. • Clear graduations on carrying case. • Complete with fitted Upon Request. *Metric Sizes Available 249 Inch models .000024" for models up to 12". Metric models 0.6um for models up to 300mm. •Parallelism: Inch Models .00008" + .00004" x (L/4"). (*truncated after decimal pt.) Metric Models (2 + L/100) um. NOTE: 0-1" and 1-2" models have Friction Thimbles. All others have Ratchet Stop. Mechancial Digit Counter Readout Features: • Mechanical counter for quick and error-free reading. • Direct readout on the counter to .001/0.01mm. • Carbide-tipped measuring faces. Accuracy: • Flatness: MIC DIGIT, 4-5" .0001" MIC DIGIT, 5-6" .0001" MIC DIGIT, 6-7" .0001" MIC DIGIT, 7-8" .0001" MIC DIGIT, 8-9" .0001" MIC DIGIT, 9-10" .0001" MIC DIGIT, 10-11" .0001" MIC DIGIT, 11-12" .0001" Description MIC DIGIT, 0-1" .001" MIC DIGIT, 0-1" .0001" MIC DIGIT, 1-2" .0001" MIC DIGIT, 2-3" .0001" MIC DIGIT, 3-4" .0001" MICROMETER 9-10" .0001" MICROMETER 10-11" .0001" MICROMETER 11-12" .0001" MICROMETER 0-1" .0001" MICROMETER 1-2" .0001" MICROMETER 2-3" .0001" MICROMETER 3-4" .0001" MICROMETER 4-5" .0001" MICROMETER 5-6" .0001" MICROMETER 6-7" .0001" MICROMETER 7-8" .0001" MICROMETER 8-9" .0001" MICROMETER 1-2" .0001" MICROMETER 0-1" .001" MICROMETER 1-2" .0001" MICROMETER 0-1" .0001" MICROMETER 1-2" .0001" MICROMETER 2-3" .0001" MICROMETER 3-4" .0001" MICROMETER 4-5" .0001" MICROMETER 5-6" Description MICROMETER 0-1" .001" MICROMETER 0-1" .001" MICROMETER 0-1" .0001" MTI 193-222 MTI 193-218 MTI 193-219 MTI 193-220 MTI 193-221 MTI 193-213 MTI 193-214 MTI 193-215 MTI 193-216 MTI 193-217 PartNo MTI 193-201 MTI 193-211 MTI 193-212 MTI 103-222 MTI 103-223 MTI 103-224 MTI 103-225 MTI 103-226 MTI 103-217 MTI 103-218 MTI 103-219 MTI 103-220 MTI 103-221 MTI 103-117 MTI 103-118 MTI 103-260 MTI 103-262 MTI 103-132 MTI 103-113 MTI 103-114 MTI 103-115 MTI 103-116 MTI 103-128 MTI 103-135 MTI 103-136 MTI 103-259 PartNo MTI 103-127 Phone: 402-455-6151 Toll Free: 800-488-9699 Micrometers - Digital Outside - Series 193 Micrometers - Digital Outside Outside Micrometers Outside - Series 103 - Outside Micrometers Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Micrometers -DigimaticSeries293withorwithoutSPCoutput Outside Micrometers MTI 293-768-30 MTI 293-766-30 MTI 293-765-30 MTI 293-761-30 MTI 293-726-30 MTI 293-725-30 MTI 293-778 MTI 293-777 MTI 293-776 MTI 293-775 MTI 293-774 MTI 293-773 MTI 293-772 MTI 293-771 MTI 293-758-30 MTI 293-757-30 MTI 293-756-30 MTI 293-755-30 MTI 293-754-30 MTI 293-753-30 MTI 293-752-30 MTI 293-751-30 MTI 293-724-30 MTI 293-723-30 MTI 293-722-30 MTI 293-721-30 PartNo MIC DIGIMATIC6-7".0001"w/SPC MIC DIGIMATIC5-6".0001"w/SPC MIC DIGIMATIC4-5".0001"w/SPC MIC DIGIMATIC3-4".00005"w/SPC MIC DIGIMATIC2-3".00005"w/SPC MIC DIGIMATIC1-2".00005"w/SPC MIC DIGIMATIC1".00005"w/SPC Description MIC DIGIMATIC1".0001"NOSPC MIC DIGIMATIC1".0005"NOSPC DIGIMATIC MIC1"NOSPC DIGIMATIC MIC1"NOSPC MIC DIGIMATIC1-2".00005"w/SPC MIC DIGIMATIC1".00005"w/SPC MIC DIGIMATIC19-20".0001"w/SPC MIC DIGIMATIC18-19".0001"w/SPC MIC DIGIMATIC17-18".0001"w/SPC MIC DIGIMATIC16-17".0001"w/SPC MIC DIGIMATIC15-16".0001"w/SPC MIC DIGIMATIC14-15".0001"w/SPC MIC DIGIMATIC13-14".0001"w/SPC MIC DIGIMATIC12-13".0001"w/SPC MIC DIGIMATIC11-12".0001"w/SPC MIC DIGIMATIC10-11".0001"w/SPC MIC DIGIMATIC9-10".0001"w/SPC MIC DIGIMATIC8-9".0001"w/SPC MIC DIGIMATIC7-8".0001"w/SPC Replacement Battery:541980(1pc.),541980-10(10/pcs/SET). Digimatic Micrometers-RotatingSpindleTypes • Zerosettingfunction(INCmode) the ORIGINbutton.(Itisalsopossibletosetanyvalueasorigin.) • Originsettingfunction(ABSmode):Theoriginpointvaluecanbedisplayedwithatouchof ranges exceeding4"(100mm)are"All-digitpresettype". • Micrometersofrangesupto4"(100mm)are"One-touchpresettype",whereasthose 12-13" rangeandabove. • Battery:SR44(541980)x1pc.formodelsupto11-12"range.2pcs.of • Carbide-tippedmeasuringfaces. L=Maximum measuringlength. (*truncated afterdecimalpt.)/(2=L/100)umformodelsover100mm. up to4"/2umformodels100mm,.00008"=.00004"x(L"/4")"over4" • Parallelism:.00004"formodelsupto2"/1um50mm,.00008" • Flatness:.000012"/0.3um Accuracy: friction thimble. • Threetypesofconstant-forcedevicesareavailable:ratchetstop,ratchet-frictionthimble,and • CanbelinkedtotheSPCsystem. SPC Models,Erroralarm,Auto-sleep,Dataoutput. • Functionsavailable:Originsetting,Inch/mmselection,Zero-setting,DataHoldonlywith (with SPCoutputModel). • Twomeasuringmodes-ABS(absolute)andINC(incremental)forefficientmeasurement held inonehand. • Lightweightdesignanddigitaldisplayallowmeasurementstobetakenwiththemicrometer • ExtralargeLCDreadout. Features: 250 .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .00005" -0.001mm .0001" -0.001"mm .0001" -0.001"mm .0001" -0.001"mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001" -0.001mm .0001"-0.001"mm .0001"-0.001"mm .0001"-0.001mm .0001"-0.001mm .0001"-0.001mm .0001"-0.001mm Resolution Accuracy ±.00005" ±.00005" ±.00005" ±.00005" ±.00005" ±.00005" ±.00035" ±.00035" ±.00025" ±.00025" ±.00025" ±.00015" ±.00015" ±.00015" ±.00005" ±.00005" ±.00005" ±.0003" ±.0003" ±.0003" ±.0002" ±.0002" ±.0002" ±.0001" ±.0001" ±.0001" Precision Tools - - ±.003" ±.0002" ±.0003" ±.0003" ±.00015" ±.00025" ±.00025" ±.00025" ±.00025" ±.00025" Accuracy Remarks with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop with standard, Ratchet Stop ±.00025" ±.00025" ±.00025" ±.00025" Accuracy Features: use with hand • These stands are designed to allow bench-top area sufficient to grab micrometers or other gages which have frame onto. 251 Features: up to 4" - ±.00015" • Accuracy 4-6" - ±.0002" 6-12" - ±.0003" clamp. • With positive locking A key wrench is supplied. by twisting the micrometer head sleeve. • Zero point can be readjusted Specifications: Tubular Inside Micrometers are available. • 2-6" set and 2-12" set on the satin chrome finished micrometer head. • Clear, crisp graduations faces. • Carbide tipped measuring case. • Supplied in a carrying request. Metric sizes available upon Description MIC TUBULAR 2-3" .001" MIC TUBULAR 3-4" .001" MIC TUBULAR 4-5" .001" MIC TUBULAR 5-6" .001" MIC TUBULAR 6-7" .001" MIC TUBULAR 7-8" .001" MIC TUBULAR 8-9" .001" MIC TUBULAR 9-10" .001" MIC TUBULAR 10-11" .001" MIC TUBULAR 11-12" .001" 4 MICS W/FITTED CASE 2-6" 10 MICS W/FITTED CASE 2-12" Description MICROMETER STAND FOR .5" THRU 4" MICROMETERS MICROMETER STAND FOR 5" THRU 12" MICROMETERS MICROMETER STAND FOR 13" THRU 40" MICROMETERS MICROMETER STAND FOR 1" THRU 2" MICROMETERS (Fixed Angle Type) MTI 156-105 PartNo MTI 156-101 MTI 156-102 MTI 156-103 MTI 133-232 MTI 133-903 MTI 133-904 MTI 133-227 MTI 133-228 MTI 133-229 MTI 133-230 MTI 133-231 MTI 133-233 MTI 133-224 MTI 133-225 MTI 133-226 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Micrometer Stand - Series 156 Outside Micrometers Inside Micrometers Inside 133 Inside - Series - Tubular Micrometers Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Indicator HolderNo.657AAMagneticBase Attachments forNos.196,196MSeries Contact PointsandAdaptersforNos.196,196MSeries Test Indicators-UniversalBack-PlungerDial Indicators STAR 50710 STAR 52765 STAR 52764 STAR 52759 STAR 52753 STAR 52752 STAR 52744 STAR 52757 STAR 52743 PartNo STAR 56613 STAR 50296 STAR 66052 STAR 50706 STAR 50709 STAR 64493 STAR 64492 PartNo STAR 70619 STAR 70618 STAR 70617 STAR 50711 PartNo STAR 65254 STAR 65253 STAR 65252 STAR 65251 STAR 50717 STAR 50714 STAR 50702 STAR 50701 STAR 50699 STAR 50697 PartNo 196MB5 STARRETTDIALINDICATOR&POINTS 196MA5Z STARRETTDIALINDICATORCASESET 196MB1 STARRETTDIALINDICATOR&POINTS 196MA1Z STARRETTDIALINDICATORCASESET 196B5 STARRETTDIALINDICATOR&POINTS 196A5Z STARRETTDIALINDICATORCASESET 196B6 ANTIMAGNETICSTARRETTDIALINDICATOR&POINTS 196A6Z ANTIMAGNETICSTARRETTDIALINDICATORCASESET 196B1 STARRETTDIALINDICATOR&POINTS 196A1Z STARRETTDIALINDICATORCASESET Description indicator mountingpost.Threeprecisiongroundmagneticcontactsurfaces (plusV-step).Backwrinklefinishon horizontal orverticalarborsandchucks.Thereisanextra1/4-20NC tappedholeinthesideofbasefor Push buttonturnsmagneticforceonoroffforquick,one-handset-up andtake-down.V-stepadaptsbaseto Powerful, permanentmagneticbaseholdsfirmlytosteelorironsurfaces -vertically,horizontally,upside-down. other manufacturers. For usewithallStarrettTest,AGD,DialandMiniature-DialIndicators.Alsoaccommodatessimilarindicatorsof Antimagnetic modelsarealsoavailable-(inchreading)Nos.196A6Zand196B6. graduations to.001"and.01mmwilhandlebyfarthemajorityofjobs.Shankdiameteris1/4"(6.3mm). While thereisaneedfortestindicatorswithfinergraduations,suchasourNo.708Series,thisindicator •Inexpensive -thebestindicatorvalueyoucanbuy •Smooth inoperation •Rugged, withfewmovingparts •Simple tooperate • Accurateandreliable design isolderthanmostofyouandhaswithstoodthetesttimebeatenallchallengersbecauseitis: Over theyearsthistoolhasbeenimprovedbymethodsandmaterialsbutbasicdesignisunchanged.The Our No.196TestIndicatorisoneofthemostversatileindicatorsavailable…andit"granddad"themall. No. 196MSeries0-2.5mm No. 196Series0-.200" non-working surfaces. 58S UNIVERSALSNUG 57S UNIVERSALSNUG PT08726ASHOCK ABSORBINGANVIL 196F HOLEATTACHMENT PT18718 SNUG(SLEEVE)COMPLETE PT99438TOOL POSTHOLDER PT99437 CLAMP Description PT05473 HARDENEDSTEELCONTACTPOINT PT05472 HARDENEDSTEELCONTACTPOINT PT05471 HARDENEDSTEELCONTACTPOINT 196R ADATPER Description PT18724 SNUG(SLEEVE) COMPLETE 657Y INDICATORATTACHMENT 657X ROD 657S SNUG(SLEEVE) 657G UPRIGHTBASEPOST 657F SWIVELPOSTASSEMBLYONLY 657A MAGNETICBASEWITHSWIVELPOST ASSEMBLY 657P MAGNETICBASEONLY 657AA MAGNETICBASEWITHALLATTACHMENTS Description 252 Dial Reading 0-50-0 0-50-0 0-50-0 0-50-0 0-50-0 0-100 0-100 0-100 0-100 0-100 Precision Tools 0-10 0-50 0-20 0-100 0-100 0-10-0 0-25-0 Dial Reading .025 .050 .125 (0.5) (2.5) 1.000 1.000 In.(mm) Total Range .010 .020 .050 .050 .100 (0.2) (1.0) Range - One Rev. In.(mm) .001 .0001 .0005 .0005 (0.01) .00025 (0.002) Grad. In.(mm) 253 Description 104A STARRETT SPD INDICATOR 104B STARRETT SPD INDICATOR •Special nonshock mechanism is available for all models except Numbers 25-109, 25-209 and 25-116 •Special nonshock mechanism is available for The No. 104A is available with or without case; sent without case unless ordered. To order red plastic case only, The No. 104A is available with or without case; No. 104B is not available with case. specify Catalog No. 920 (EDP No. 55173). The •Ranges up to 1 Inch and 25 Millimeters steel gear train and jewel bearings, except where noted •These indicators have a shockless, hardened •They are furnished with a lug-on-center back models •Anti-magnetic mechanism is optional for all The No. 104 Speed Indicators have a dial plate that is graduated from 0 to 100 revolutions. have a dial plate that is graduated from The No. 104 Speed Indicators can be easily moved to the starting point tool is the center rotating friction-disc which Then main feature on this the inner disc knob. When the indicator point the outer graduated dial will coincide with where the raised knob on firmly pressing on the raised knob with the shaft, the inner disc is held from turning by is applied to a revolving on the outer dial coincides with the knob by releasing the pressure at the time the knob thumb or forefinger. Then, is counted by feeling the inner knob pass revolve. Every 100 revolutions of the spindle being held, the disc will a minute will give you the R.P.M. Timing the number of revolutions for under the thumb or forefinger. While higher speeds can be handled, used for R.P.M.'s up to the 1,000 or 2,000 range. These tools are generally counted. they cannot be practically 25-128J DIAL INDICATOR 25-131J DIAL INDICATOR 25-631J DIAL INDICATOR 25-441J DIAL INDICATOR 25-261J DIAL INDICATOR 25-281J-8 DIAL INDICATOR Description 25-211J DIAL INDICATOR For More Information on These Products and Other For More Information on These Products Sales Products You Are Looking For, Call Industrial at the John Day Company at 800-488-9699.

STAR 53303 STAR 53295 STAR 53281 STAR 64654 STAR 53255 STAR 53230 STAR 53232 PartNo STAR 50468 STAR 50470 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Dial Indicators - AGD Group 2 (25 Series) Dial Indicators - AGD Group Indicators 104 Series Indicators No. Speed Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 IDS DigimaticIndicatorswithAbsoluteEncoderSeries543 Dial Indicators/Group2Inch Indicators MTI 543-683B MTI 543-683 PartNo MTI 2776F-60 MTI 2776F MTI 2514F-60 MTI 2514F MTI 2675F MTI 2576F-60 MTI 2507F-10 MTI 2506F-10 MTI 2506F MTI 2670F-10 MTI 2670F MTI 2571F-10 MTI 2570F-10 MTI 2500F-10 MTI 2476F-60 MTI 2600F-10 MTI 2358-50 MTI 2356-50 MTI 2806F-10 MTI 2905F-10 MTI 2804F-10 MTI 2803F-10 MTI 2802F-10 MTI 2937F-10 PartNo DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR DIAL INDICATOR Description (Flat-Back) IDSDigimatic Indicator (Lug-Back) IDSDigimaticIndicator Description maintained forthelifeofbattery.TheIDSprovidescleardigital readings inaconvenientandcompactpackage These IDSTypeDigimaticIndicatorsincorporateMitutoyo'sAbsolute EncoderTechnologysoallsettingsare Simple andEconomicalDesignwithAbsoluteEncoder. f. DialNumbering-inch:dialnumbersshallalwaysindicatethousandthsofandinchregardlessmagnification. 0.01mm. e. SmallestGraduation-inch:.00005",.0001",.0005"and.001".Metric:0.001mm,0.002mm,0.005mm extended. d. HandPosition-theindicatinghandshallbesetattheapproximate9o'clockpositionwhenspindleisfully c. SpindleRange-therangeofspindletravelshouldbeaminimum2-1/2revolutionstheindicationhand. b. Accuracy-shallbeaccuratetowith1graduation+/-atanypoint(2-1/3turns). a. Repeatability-within+/-1/5graduationatanypoint. Following isadigestofthespecifications. They providestandardsofperformanceandbasicexteriordimensionsinordertopermitinterchangeability. American GageDesign(AGD) conform tothethreespecificationsgoverningdialindicators,highlightsofwhichfollow. Mitutoyo offersdialindicatorsinfourbasicAGDGroups,withinchandmetricgraduations.Theseinstruments which conformsgenerallytoGroup2DialIndicatordimensions. 254 .00025" .00025" .0001" .0001" .0001" .0001" .0001" .0001" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0005" .0001" .0001" Grad. Grad. In.(mm) .0005" .0005" Range -One .008" Rev. .01" .01" .01" .01" .01" .05" .05" .05" .05" .04" .03" .05" .05" .05" .04" .04" .03" .03" .02" .02" .01" .01" .01" Rev. In.(mm) Range -One .05" .05" Total Range .025" .025" .125" .125" .125" .075" .075" .025" .05" .05" .02" .05" .24" .25" .1" .1" .1" .5" .5" .4" .3" .1" .1" .5" In.(mm) Range Total 1" 1" Dial Reading Dial Reading 0-20-0 0-25-0 0-15-0 0-5-0 0-4-0 0-50 0-50 0-50 0-50 0-30 0-50 0-50 0-40 0-40 0-30 0-20 0-20 0-10 0-10 0-10 0-10 0-10 0-10 0-10 0-50 0-50 Precision Tools 55 lbf 55 lbf Magnetic Pull 132 lbf 132 lbf Magnetic Pull Desc. - Gen. Overall Height: 5.3" (Approx.) Overall Height: 5.5" (Approx.) 255 John Day Company Mitutoyo Magnetic Stands, shown on therse pages, accept all AGD-type Dial Indicators. Mitutoyo Magnetic Stands, shown on therse pages, Very small magnetic stands permit use of Dial Indicators and Test Indicators and Test Indicators in confined areas. Very small magnetic stands permit use of Dial The stands feature fine adjustment. bases, will accept stems of 3/8" Dia. and are furnished with a Stands No.'s 984-107 and 108, which rectangular stands also have a fixture for mounting dial indicators with lug-on sleeve for locking on stems of 8mm Dia. These rod is coupled to the base through a ball-and-socket joint. center backs. On Stand No. 984-107 the vertical Mitutoyo Magnetic Stands, shown, accept all AGD-type Dial indicators. Test Indicators and Probes having 3/8" shown, accept all AGD-type Dial indicators. Mitutoyo Magnetic Stands, Back with 1/4" DIA. mounting hole. DIA. shank and/or Lug any adverse effect to the indicators or work instant mounting and dismounting without The ON-OFF Switch offers surface. Description MAGNETIC STAND W/6" ROD AND UNIVERSAL CLAMP CLAMP MAGNETIC STAND W/6" ADJUSTABLE ROD AND UNIVERSAL Description Mini-Magnetic Stands Mini-Magnetic Stand

www.johnday.com Phone: 800-488-9699 Fax: 800-488-9720 6263 Abbott Drive, 68110 Omaha Nebraska Omaha

PartNo MTI 984-107 MTI 984-108 PartNo MTI 7010SN MTI 7011BN Phone: 402-455-6151 Toll Free: 800-488-9699 Indicators Mini-Magnetic Stands Series 984 Mini-Magnetic Stands Series Magnetic Stands No. 7010SN and No. 7011BN 7010SN and No. Stands No. Magnetic Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Dial Calipers(120and120MSeries) Caliper andDividers-"Yankee"Spring-Type Calipers STAR 65910 STAR 56693 STAR 64520 STAR 65909 STAR 64514 PartNo STAR 50385 STAR 50384 STAR 50381 STAR 50380 STAR 50379 STAR 50378 STAR 50377 STAR 50376 STAR 50373 STAR 50372 STAR 50369 STAR 50368 STAR 50367 STAR 50366 STAR 50365 STAR 50364 STAR 50343 STAR 50342 STAR 50339 STAR 50338 STAR 50337 STAR 50336 STAR 50335 STAR 50334 PartNo 150MM METRICCALIPER WITHCARBIDEFACE 12" CALIPERINWOODCASE 9" CALIPERINWOODCASE 6" CALIPERWITHCARBIDEFACES 120A-6 STARRETT6"DIAL Description •Knife-edge contactsforbothinsideandoutsidemeasurements Ease-of-Handling Features: •Choice ofblack,red,orwhiteinchdials;millimeterdialsareyellow •Sharp, blackgraduationsonthesatinfinishedbar,every.100Inchor1Millimeter •Sharp, cleardialgraduationsof.001Inchor0.02Millimeters-.1002inonerevolution Readability Features: •It isdirectreadingreliable,andaccurate •This isoneofthehandiestmeasuringtoolsavailable,usedbymechanicsandtoolmakerseverywhere the nutautomaticallyreleasesitself,slidingfreelyoverscrew.Thisfeaturesavestimeinopeningandclosing. threads ofthenutfirmlyengagescrewatslightestpressurefromleg.Wheniswithdrawn, nut. TheStarrettquick-adjustingautomatic-closingspringnutisdesignedformakingfastpositiveadjustments. although flexible,isexceedinglystrongtoassurereliability.Allsizesareavailablewitheitherspringnutorsolid flat stockandareverydurable.Thefulcrumstudishardenedhasasmoothbearingsurface.bowspring, Starrett "Yankee"CalipersandDividersaremadefromahigh-gradesteelwell-finished.Thelegsof Nos, 73,79,83Series4,6,8,12(100,150,200,300mm) •Rack teethpointdowntomakeit easy toshedforeignmatterandtherebykeeptheareaclean •Positive, split-gearanti-backlash control •Hardened stainlesssteelbar,measuringsurfaces,rack,gears,anddepth rod •Long-wearing carbidefacesonoutsidecontactsNumbers.120AX-6 and120AMX-150only Accuracy andLong-LifeFeatures: movable jawwiththelockandscrewthenusingfrontedgeof thefixedjawasscribingsurface •Parallel linesmaybescribedonaworkpiecebysettingthecaliperjaw totherequireddimensions,locking •There isalsoadetachabledepthrodavailableforthe12Inchmodel Inch sizes •Depth rodattachmentavailabletosetthetoolforaccuratedepthmeasurements on6Inch(150Millimeters)and9 •Lock screwforholdingtheslidingjawinposition •Lock screwfordialbezel •One handusewiththethumb-operated,fineadjustmentroll 83B-12 STARRETT12"DIVIDER-QUICKSPRINGNUT 83A-12 STARRETT12"DIVIDER-SOLIDNUT 83B-8 STARRETT8"DIVIDER-QUICKSPRINGNUT 83A-8 STARRETT8"DIVIDER-SOLIDNUT 83B-6 STARRETT6"DIVIDER-QUICKSPRINGNUT 83A-6 STARRETT6"DIVIDER-SOLIDNUT 83B-4 STARRETT4"DIVIDER-QUICKSPRINGNUT 83A-4 STARRETT4"DIVIDER-SOLIDNUT 79B-12 STARRETT12"OUTSIDECALIPERS-QUICKSPRINGNUT 79A-12 STARRETT12"OUTSIDECALIPERS-SOLIDNUT 79B-8 STARRETT8"OUTSIDECALIPERS-QUICKSPRINGNUT 79A-8 STARRETT8"OUTSIDECALIPERS-SOLIDENUT 79B-6 STARRETT6"OUTSIDECALIPERS-QUICKSPRINGNUT 79A-6 STARRETT6"OUTSIDECALIPERS-SOLIDNUT 79B-4 STARRETT4"OUTSIDECALIPERS-QUICKSPRINGNUT 79A-4 STARRETT4"OUTSIDECALIPERS-SOLIDNUT 73B-12 STARRETT12"INSIDECALIPERS-QUICKSPRINGNUT 73A-12 STARRETT12"INSIDECALIPERS-SOLIDNUT 73B-8 STARRETT8"INSIDECALIPERS-QUICKSPRINGNUT 73A-8 STARRETT8"INSIDECALIPERS-SOLIDNUT 73B-6 STARRETT6"INSIDECALIPERS-QUICKSPRINGNUT 73A-6 STARRETT6"INSIDECALIPERS-SOLIDNUT 73B-4 STARRETT4"INSIDECALIPERS-QUICKSPRINGNUT 73A-4 STARRETT4"INSIDECALIPERS-SOLIDNUT Description 256 CATALOG NO. 120MX-150 120AZ-9 120Z-12 120X-6 120A-6 Range In.(mm) (0 -150) 0 -12 0 -9 0 -6 0 -6 Dial Color Yellow White White White White Grad. (0.02) .001 .001 .001 .001 Precision Tools 0- 8(200) 0- 8(200) 0 - 6(150) 0 - 6(150) 0 - 12(300) 0 - 12(300) Range In.(mm) Remarks No SPC output Depth Bar Provided Accuracy ±.005" - ±0.2mm Resolution .001" - 0-1mm 257 Range 0-6" - 0-150mm Specifications: Response Speed: 63'/s (4,600mm/s) Battery: Silver oxide cell SR-44 (1 pc.) Part No. 541980 Battery Life: Approx. 2 years. (under normal use) Display: LCD 4-digit (-) sign. Character height .295" Alarm: Battery voltage low. Over speed. MyCal Life is an innovative, new Digimatic® Caliper which is economically priced to allow everyone to benefit MyCal Life is an innovative, new Digimatic® Caliper which is economically priced to allow either inch or mm from the advantages of modern digital gages. Large LCD digits ensure error free reading in mode. Additionally, the zero point can be set anywhere to allow quick comparison measurements. • Induction type linear encoder system. • Induction type linear long life. • Hardened stainless steel measuring surface for the tool for more accurate measurements on all sizes. • Depth rod with available attachment to seat • Fine adjustment for precision measurements. • Lock to hold the slide in position. • Linear accuracy meets DIN862. • Resolution is .0005" (0.01mm) hours of battery life. • Long life CR2032 3V battery with >3500 continuous • Inch/mm conversion • Zero at any position. hours of non-use. • Manual on/off, plus an automatic off after four collection to RS232 devises, including -Starrett 772 • Capable of outputting data for analysis and data 761 Series Data Multiplexers, -Other devices that support Series/Advanced Data Collection Systems, -Starrett RS292. The new Starrett 797 Electronic Caliper provides an IP65 level of protection against foreign matter in hostile ship foreign matter in hostile level of protection against provides an IP65 797 Electronic Caliper The new Starrett also offers excellent protection against to being coolant and water resistant, the 797 environments. In addition contaminants. chips, dirt, dust and other easy to read. All 797 models also include height .310) makes the 797 exceptionally The extra large LCD (character equipment devices. an output port for RS232 a Starrett-for a century and a quarter, the tool electron calipers available, only the 797 is While there are other IP65 measurements are most critical. toolmakers and machinists with the of choice for the most experienced Features: display. • Large, easy-to-read LCD against coolant, water, dirt and dust. • IP65 level of protection protection against ingress of dust - The IP65 stands for -The first number "6" identifies According to IEC529, a nozzle from and direction for a duration of protection against water jets projected by second number "% identifies three minutes. 797B-6/150 Caliper with Output in Fitted Plastic Case In Fitted Plastic Case 797B-6/150 W/SLC Caliper with Output Standard Letter or Cert. 794B-8/200 Caliper with Output in Fitted Plastic Case In Fitted Plastic Case 757B-8/200 W/SLC Caliper with Output Standard Letter or Cert. 797B-12/300Caliper with Output in Fitted Plastic Case In Fitted Plastic Case 797B-12/300 W/SLC Caliper with Output Standard Letter or Cert. PT26151 Center Distance/Attachment PT22431 Depth Attachment PT62606 Computer Interface Cabe to PC (RS232) Modules PT 61340 Shielded Cable from 797 Series to 761772 Series Starrett PT 99492 Two 1 1/2-Volt Batteries, No. CR2032 721ZZ-6 Deluxe Padded Case for 0-6" Caplipers 950 Finished Wood Case for 0-8" Calipers 946 Finished Wood Case for 0-12" Calipers Description Description Caliper, Digimatic MY-CAL PartNo MTI 700-113 STAR 63878 STAR 56695 STAR 64640 STAR 68822 STAR 65648 STAR 65650 STAR 57070 STAR 68824 STAR 68661 STAR 68825 STAR 64440 PartNo STAR 68659 STAR 68823 STAR 68660 Phone: 402-455-6151 Toll Free: 800-488-9699 MyCal Lite Series 700 - Economy Digimatic Caliper Calipers (797B Series) (721 Series) Digital Calipers Electronic Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Digimatic CaliperswithAbsoluteEncoder Series500-withoutSPCoutput Digmatic CaliperswithAbsoluteEncodersSeries500 Calipers MTI 500-166 MTI 500-165 MTI 500-193 MTI 500-164 MTI 500-163 MTI 500-197 MTI 500-160 MTI 500-159 MTI 500-196 MTI 500-195 PartNo MTI 500-507-10 MTI 500-506-10 MTI 500-505-10 MTI 500-173 MTI 500-168 MTI 500-167 MTI 500-177 MTI 500-176 MTI 500-172 MTI 500-178 MTI 500-175 MTI 500-174 MTI 500-171 MTI 500-170 MTI 500-501-10 MTI 500-500-10 MTI 500-153 MTI 500-152 MTI 500-151 MTI 500-150 PartNo Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperswithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Description Digimatic Caliperswith Absolute Encoder Digimatic CaliperswithAbsoluteEncoder Caliper, Digimatic12" Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Caliper, MY-CAL8"Digimatic Digimatic CaliperwithAbsoluteEncoder Digimatic CaliperwithAbsoluteEncoder Caliper, MY-CAL6"Digimatic Caliper, MY-CAL4"Digimatic Description 0-40" -0-1.000mm 0-24" -0-600mm 0-18" -0-430mm 0-12" -0-300mm 0-12" -0-300mm 0-12" -0-300mm 0-8" -0-200mm 0-8" -0-200mm 0-8" -0-200mm 0-6" -0-150mm 0-6" -0-150mm 0-6" -0-150mm 0-6" -0-150mm 0-4" -0.100mm 0-600mm 0-450mm 0-300mm 0-200mm 0-150mm 0-100mm Range Replacement Battery:541980(1pc).541980-10(10pcs/SET). For SPCoutputorderConnectingCable959150(2m). from justasingleSR44batterycell.(541980). the AbsoluteEncoderDigimaticCaliperis3.5yearsofuseundernormalworkingconditions Also providedisinch/mmconversionandSPCdataoutput.Anotheroutstandingfeatureof display ofthetruepositionfromoriginpoint. comparison measurements.Thisswitchwillalsoallowreturntotheabsolutemodeand • Zero/ABS:AllowsthedisplaytobeZero-Setatanypointalongsliderforincremental standard models. will switchonshowingitstruepositionfromtheoriginpointratherthan0.0000aswith measurements (generallysettoclosedjawposition).Onceset,theAbsoluteEncodercaliper • Origin:Allowssettingofanoriginstartingpointtobeusedasreferenceinsubsequent it toalwaysrememberitsmeasuringpositionevenafterthegagehasbeenswitchedoff. MITUTOYO's newAbsoluteEncoderDigimaticCaliperoffersspecialfunctionswhichallow 258 Measuring Range 0-12" -0-300mm 0-12" -0-300mm 0-12" -0-300mm 0-8" -0-200mm 0-8" -0-200mm 0-8" -0-150mm 0-6" -0-150mm 0-6" -0-150mm 0-6" -0-150mm 0-4" -0-100mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm Resolution 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm .0005" -0.01mm Accuracy ±0.05mm ±0.05mm ±0.03mm ±0.02mm ±0.02mm ±0.02mm ±.0015" ±.0015" ±.0015" ±.003" ±.002" ±.002" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" Resolution with OD,IDCarbideJaw,AbsoluteFunctionType with OD,IDCarbideJaw,AbsoluteFunctionType .075 RoundDepthBar,AbsoluteFunctionType with ODCarbideJaw,AbsoluteFunctionType with ODCarbideJaw,AbsoluteFunctionType Accuracy ±.0015" ±.0015" ±.0015" without DepthBar,AbsoluteFunctionType without DepthBar,AbsoluteFunctionType without DepthBar,AbsoluteFunctionType without DepthBar,AbsoluteFunctionType without DepthBar,AbsoluteFunctionType ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" 1.9mm RoundDepthBar. with OD,IDCarbideJaw .075" RoundDepthBar with ODCarbideJaw Remarks with OD,IDCarbideJaw with OD,IDCarbideJaw with OD,IDCarbideJaw with OD,IDCarbideJaw with OD,IDCarbideJaw with O.D.CarbideJaw .075 RoundDepthBar .075 RoundDepthBar with ODCarbideJaw with ODCarbideJaw Remarks Precision Tools Remarks Dial Face: B Dial Face: B Dial Face: B Dial Face: B Dial Face: A Dial Face: A Dial Face: A Dial Face: A Red Dial Face, Dial Face: B Blue Dial Face,Dial Face: B Black Dial Face, Dial Face: B Green Dial Face, Dial Face: B Purple Dial Face, Dial Face: B Orange Dial Face, Dial Face: B Dial Face: B with OD Carbide Jaw Dial Face: B with OD Carbide Jaw Dial Face: B with OD Carbide Jaw Dial Face: A with OD Carbide Jaw Dial Face: A with OD Carbide Jaw Dial Face: B Extra Smooth Movement Dial Face: B Extra Smooth Movement Dial Face: B with OD, ID Carbide Jaw Dial Face: B with OD, ID Carbide Jaw Dial Face: B with OD, ID Carbide Jaw Black Dial Face, Dial Face: B with Ratchet Stop (20•) ±.001 ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.001" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" ±.002" Accuracy ev. .10 .20" .10" .20" .10" .10" .10" .10" .10" .10" .10" .20" .10" .10" .10" .10" .20" .10" .10" .10" .20" .20" .10" .10" .10" Dial Reading Range/R Dial .001 .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" .001" Reading Resolution 259 0-6 0-4" 0-4" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-6" 0-8" 0-8" 0-8" 0-8" 0-8" 0-12" 0-12" 0-12" 0-12" 0-12" Range Description EXECUTIVE POCKET CALIPER •Improved durability, the sliding surfaces of the main blade are coated with titanium. sliding surfaces of the main blade are coated •Improved durability, the indicated on the dial. amplified by a rack-and-pinion mechanism •Slider displacements are •QUADRI (4-way) measurement. Hardened stainless steel. •Extra-rigid main beam, case. •Supplied in fitted carrying •Black-Face-Ratchet Type markings and a bright orange indicator an alternative dial face in black with white Model 505-675-66 features new ratchet thumb roller providing a positive- This model is also equipped with Mitutoyo's needle for easy reading. a micrometer ratchet thimble. clicking action just like for identifying different users or face calipers are also available with are useful •Other alternate color dial calibration schedules. departments and maintaining A Stainless Steel Pocket Slide Caliper A full 3-1/2 ruler for ordinary measuring, graduated in 64ths etched at the upper straight edge. Caliper jaws open to measure to 2-7/8" and has depth capacity of 3/4". Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Description Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 Dial Caliper - Series 505 PartNo SEEMOR 1045 MTI 505-721 MTI 505-677 MTI 505-710 MTI 505-714 MTI 505-719 MTI 505-676 MTI 505-709 MTI 505-713 MTI 505-720 MTI 505-718 MTI 505-708 MTI 505-712 MTI 505-689 MTI 505-690 MTI 505-675-54 MTI 505-675-55 MTI 505-675-56 MTI 505-675-66 MTI 505-717 MTI 505-675 MTI 505-675-51 MTI 505-675-52 MTI 505-675-53 MTI 505-716 MTI 505-674 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Calipers 505 - Series Dial Calipers The Executive Pocket Chum Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Steel RuleswithInchFigures Straight EdgeswithBevel-Draftsmen’sSteel Straight Edges-Steel Steel Rules STAR 52674 STAR 66009 STAR 52696 STAR 52662 STAR 52678 STAR 52645 STAR 56701 STAR 51357 STAR 51334 STAR 55434 STAR 55433 PartNo STAR 51467 STAR 51465 STAR 51464 STAR 51463 STAR 51462 PartNo STAR 51472 STAR 51471 STAR 51470 STAR 51469 STAR 51468 STAR 51461 STAR 51459 STAR 51458 STAR 51457 STAR 51456 STAR 51455 STAR 51444 STAR 51442 STAR 51441 STAR 66895 STAR 51440 STAR 51439 STAR 51438 PartNo REVERSIBLE HOOK CH604R-12 12"CHROME FULL-FLEXIBLE C304R-12 12"CHROME TEMPERED C610N-6 6"CHORMESPRING TEMPERED DH604R-6 6"STEELSPRING TEMPERED C604R-6, 6"CHROMESPRING TEMPERED 604R-6 6"STEELSPRING FULL-FLEXIBLE C310K-6 6"CHROME FLEXIBLE C309R-6 6"CHROMEFULL C303R-6 6"FULL-FLEXIBLE Rules Case For3/4In.(19Millimeters)Wide Wide Rules Case For1/2In.(12.7Millimeters) Description 387-48 STARRETT48"STEELSTRAIGHTEDGE 387-36 STARRETT36"STEELSTRAIGHTEDGE 387-24 STARRETT24"STEELSTRAIGHTEDGE 387-18 STARRETT18"STEELSTRAIGHTEDGE 387-12 STARRETT12"STEELSTRAIGHTEDGE 385-72 STARRETT72"STEELSTRAIGHTEDGE 385-48 STARRETT48"STEELSTRAIGHTEDGE 385-36 STARRETT36"STEELSTRAIGHTEDGE 385-24 STARRETT24"STEELSTRAIGHTEDGE 385-18 STARRETT18"STEELSTRAIGHTEDGE 385-12 STARRETT12"STEELSTRAIGHTEDGE 380-72 STARRETT72"STEELSTRAIGHTEDGE 380-48 STARRETT48"STEELSTRAIGHTEDGE 380-36 STARRETT36"STEELSTRAIGHTEDGE 380-24 W/SLCSTARRETT24"STEELSTRAIGHTEDGE 380-24 STARRETT24"STEELSTRAIGHTEDGE 380-18 STARRETT18"STEELSTRAIGHTEDGE 380-12 STARRETT12"STEELSTRAIGHTEDGE Description 386-72 STARRETT72"DRAFTMENSTAIGHTEDGE 386-48 STARRETT48"DRAFTMENSTAIGHTEDGE 386-36 STARRETT36"DRAFTMENSTAIGHTEDGE 386-24 STARRETT24"DRAFTMENSTAIGHTEDGE 386-12 STARRETT12"DRAFTMENSTAIGHTEDGE Description 3/16 x3/64 1/2 x1/64 3/4 x3/64 3/4 x3/64 3/4 x3/64 1/2 x1/64 1/2 x1/64 1/2 x1/64 Thck. In. Wdth. x 1 x3/64 a convenienthand-holeononeend. Available inlengthsupto72"long.Theyhaveanattractivenickelplatedfinish,arebeveledononeedge,and These straightedgesarethinnerthanourNo.385Series(3/32"or2.4mm)makingthemeasierfordraftsmentouse. the useofstraightedgesinfirstposition-anditisthisthatwecheckmoststringent. the workandusedonedgetheyshouldbesuspendedatthesetwopointstominimizedeflection.Mostjobsinvolve Series issizes:36"andlongeraremarkedwitharrowsattwosuspensionpoints.Ifthestraightedgesbroughtto The No.387Serieshasoneedgethatisbothbeveledandgraduatedin32ndsofaninch.380385 The No.380Servicesarenotbeveledorgraduated.No385Seriesoneedge,but retain shapeandaccuracy,butstillbeportableeasytohandle. drawing orscribingstraightlinesandcheckingsurfacesforstraightness.Theirthicknessdesignpermitthemto These straightedgesareprecisiongroundandnicelyfinishedtorigidStarrettstandards.Theyunexcelledfor rules) arefurnishedatnoextracostinthisattractive,protectivecase iwth see-throughfront. •For addedconvenienceandprotection,all6Inch150Millimetersrulesin1/2"3/4"widths(excepthook Cases for6Inch/150MillimetersRules: •Additional sizesandvariationsavailableonspecialorder •All rulesfurnishedwithStarrettsatinchromefinish,exceptwherenoted - - No. 9R-16thsandQuickReading32ndsonOneSide;64thsReverseSide No. 3R-QuickReading10ths,Aircraft50ths,32ndsand64ths No. 4R-8ths,16ths,Quick Reading32ndsand64ths No. 4R-8ths,16ths,QuickReading32ndsand64ths No. 4R-8ths,16ths,QuickReading32ndsand64ths No. 4R-8ths,16ths,QuickReading32ndsand64ths No. 4R-8ths,16ths,QuickReading32ndsand64ths No. 10-32ndsOneSideand64thsonReverse 260 No. 10-32ndsand64thsonOneSideOnly Grad. - - 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 1 13/32"x11/64"(364.4mm) 2 13/32"x7/32"(605.5mm) 2 13/32"x7/32"(605.5mm) 2 13/32"x7/32"(605.5mm) 2 13/32"x7/32"(605.5mm) 2 13/32"x7/32"(605.5mm) 2 13/32"x7/32"(605.5mm) 3 5/32"x9/32"(807mm) 3 5/32"x9/32"(807mm) 1 9/16"x3/32"(402.4mm) 1 9/16"x3/32"(402.4mm) 1 9/16"x3/32"(402.4mm) 2 5/8"x7/64"(662.8mm) 2 1/8"x3/32"(542.4mm) Width xThickness Width xThickness Adjustable Dbl.Hook Regular SteelFinish Feature Remarks Reversible Hook Narrow Rule Pocket Clip ------Type ofSteelRuleIn. 12 SpringTempered 6 SpringTempered 6 SpringTempered 6 SpringTempered 6 SpringTempered 12 Full-Flexible 6 Full-Flexible 6 Full-Flexible 6 Full-Flexible - - Precision Tools Graduation 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths 261 Blade Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Regualr Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Satin Chrome Cast Iron Heads: No. 11HC Series steel, machine-divided blade with regular scriber, spirit level (except 4"), and hardened With reversible lock bolts, Cast iron heads with black wrinkle finish. or satin chrome finish. Heads: Forged and Hardened Steel No. 33HC Series that the square heads and center heads are same features as the No. 11HC Series except These squares have the smooth, black enamel finish. forged hardened steel with For More Information on These Products and Other For More Information on These Products Sales Products You Are Looking For, Call Industrial at the John Day Company at 800-488-9699.

33HC-18-16R STARRETT 18" COMBO SQUARE C33HC-18-16R STARRETT 18" COMBO SQUARE 33HC-24-4R STARRETT 24" COMBO SQUARE C33HC-24-4R STARRETT 24" COMBO SQUARE 33HC-24-16R STARRETT 24" COMBO SQUARE C33HC-24-16R STARRETT 24" COMBO SQUARE C33HC-6-4R STARRETT 6" COMBO SQUARE 33HC-6-16R STARRETT 6" COMBO SQUARE C33HC-6-16R STARRETT 6" COMBO SQUARE 33HC-12-4R STARRETT 12" COMBO SQUARE C33HC-12-4R STARRETT 12" COMBO SQUARE 33HC-12-16R STARRETT 12" COMBO SQUARE C33HC-12-16R STARRETT 12" COMBO SQUARE 33HC-18-4R STARRETT 18" COMBO SQUARE C33HC-18-4R STARRETT 18" COMBO SQUARE C11HC-18-4R STARRETT 18" COMBO SQUARE 11HC-18-16R STARRETT 18" COMBO SQUARE C11HC-18-16R STARRETT 18" COMBO SQUARE 11HC-24-4R STARRETT 24" COMBO SQUARE C11HC-24-4R STARRETT 24" COMBO SQUARE 11HC-24-16R STARRETT 24" COMBO SQUARE C11HC-24-16R STARRETT 24" COMBO SQUARE 33HC-4-4R STARRETT 4" COMBO SQUARE C33HC-4-4R STARRETT 4" COMBO SQUARE 33HC-6-4R STARRETT 6" COMBO SQUARE 11HC-6-4R STARRETT 6" COMBO SQUARE C11HC-6-4R STARRETT 6" COMBO SQUARE 11HC-6-16R STARRETT 6" COMBO SQUARE C11HC-6-16R STARRETT 6" COMBO SQUARE 11HC-12-4R STARRETT 12" COMBO SQUARE C11HC-12-4R STARRETT 12" COMBO SQUARE 11HC-12-16R STARRETT 12" COMBO SQUARE C11HC-12-16R STARRETT 12" COMBO SQUARE 11HC-18-4R STARRETT 18" COMBO SQUARE Description 11HC-4-4R STARRETT 4"COMBO SQUARE C11HC-4-4R STARRETT 4" COMBO SQUARE

STAR 50218 STAR 56405 STAR 50220 STAR 56407 STAR 56399 STAR 50214 STAR 56401 STAR 50216 STAR 56403 STAR 56395 STAR 50210 STAR 56397 STAR 50212 STAR 50204 STAR 56391 STAR 50206 STAR 56393 STAR 50208 STAR 50064 STAR 56375 STAR 50066 STAR 56377 STAR 56369 STAR 50060 STAR 56371 STAR 50062 STAR 56373 STAR 50053 STAR 56365 STAR 50056 STAR 56367 STAR 50058 STAR 50050 STAR 56361 STAR 50052 STAR 56363 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Steel Rules Head Head and Center with Square Squares Combination Precision Tools Series 180 Toll Free: 800-488-9699 Phone: 402-455-6151 Steel RulePocket-Series950 Combination SquareSets Adjustable Parallels-No.154Series Steel Rules MTI 950-300 PartNo MTI 180-910 MTI 180-810 MTI 180-907 MTI 180-807 MTI 180-906 MTI 180-905 MTI 180-904 MTI 180-903 MTI 180-902 MTI 180-901 MTI 180-806 MTI 180-805 MTI 180-804 MTI 180-803 MTI 180-802 MTI 180-801 PartNo STAR 55195 STAR 55194 STAR 50586 STAR 50584 STAR 50583 STAR 50582 STAR 50581 STAR 50580 STAR 50579 STAR 50578 PartNo Pocket SteelRulewithClip Description S154LZZ CASEONLYFORSETOF6 S154SZZ CASEONLYFORSETOF4 S154LZ SETOF6PARALLES(A-F)INCASE S154SZ SETOR4PARALLES(A,B,C.D)INCASE 154F STARRETTPARALLEL 154E STARRETTPARALLEL 154D STARRETTPARALLEL 154C STARRETTPARALLEL 154B STARRETTPARALLEL 154A STARRETTPARALLEL Description the lardersizes,D,E,andF,havetwolockscrews.Allparallelsare9/32"(7mm)think. Parallels slidesmoothlyandcanbeeasilyadjusted.ThesmallersizesA,BC,arelockedbyonescrewwhile presses andformanyotherapplications. machine vises,forlevelingoradjustingworkonsetupsofmillingandgrandingmachines,shapers,planers,drill These parallesareusefulashahesincheckingthesizeofslotsandopenings.Theyalsoconvenientforuse and alsopermitsuseinplaceofseveralsolid-typeparallels. machine tools.Theiradjustablefeaturemakesitpossibletoadjustthemexactsizebymicrometermeasurement Starrett adjustableparallelsprovideawiderangeofuseinlayout,gaginginspectionworkandforsetupsonvarious 300mm COMBOSQUAREW/CASTIRON&PROTRACTORHEADS 300mm COMBOSQUAREW/PROTRACTORHEAD 12"/300mm COMBOSQUAREW/CASTIRON&PROTRACTORHEADS 12"/300mm COMBOSQUAREW/PROTRACTORHEAD 12" -16RCOMBOSQUAREW/CASTIRON&PROTRACTORHEADS 12" -4RCOMBOSQUAREW/CASTIRON&PROTRACTORHEADS 12" -16RCOMBOSQUAREW/CASTIRONHEADS 12" -4RCOMBOSQUAREW/CASTIRONHEADS 6" -16RCOMBOSQUAREW/CASTIRONHEADS 6" -4RCOMBOSQUAREW/CASTIRONHEADS 12" -16RCOMBOSQUAREW/PROTRACTORHEAD 12" -4RCOMBOSQUAREW/PROTRACTORHEAD 12" -16RCOMBOSQUARE 12" -4RCOMBOSQUARE 6" -16RCOMBOSQUARE 6" -4RCOMBOSQUARE Description 6" x150mm Size 262 NOTE: WhenorderingusePrefix MTIinfrontofOrderNo. • Backside:Inch/Metricequalivents • Engravedonfrontsideonly. Features: (With PocketClip(thickness1/64") 1mm 1/64ths Grad. 4 3/16"(105mm) 2 11/16"(70mm) 5 1/16"(130mm) 3 9/16"(90mm) 2 1/8"(55mm) 1 3/4"(45mm) Length - - - - Wdth. 1/2" (Length) +.004"/-.002"(+0.1mm/-0.05mm) 11/16-15/16" (17.5-24mm) 15/16-1 5/16"(24-33mm) 1/2-11/16" (12.7-17.5mm) 1 5/16-13/4"(33-44mm) 1 3/4-21/4"(44-57mm) 3/8-1/2" (9.5-12.7mm) Accuracy Range - - - - Precision Tools Size 6 Flex 6 Flex(150mm) Accuracy 15/32 15/32 15/32 +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.004"/-.002"(+0.1mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.005"/-.002"(+0.13mm/-0.05mm) +.008/-.003"(+0.20mm/-0.075mm) +.008/-.003"(+0.20mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.006"/-.003"(+0.15mm/-0.075mm) +.007"/-.003"(+0.18mm/-0.075mm) +.007"/-.003"(+0.18mm/-0.075mm) +.007"/-.003"(+0.18mm/-0.075mm) +.007"/-.003"(+0.18mm/-0.075mm) Wdth. (In.) 32, 64 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 12mm 12mm 18mm 18mm 12mm 12mm Dec. Equiv. Width Grad. Side 2 Metric Equiv. 32, 64 10, 100 mm, 64 Grad. Side 1 Graduations 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/8, 1/16, 1/32, 1/64 1/32, 1/64, 1/10, 1/50 1/32, 1/64, 1/10, 1/50 1/32, 1/64, 1/10, 1/50 1/32, 1/64, 1/10, 1/50 1/32, 1/64, 1/10, 1/50 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/50, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1/10, 1/100 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/32, 1/64, 1mm, 0.5mm 1/10, 1/50, 1mm, 0.5mm 1/50, 1/100, 1mm, 0.5mm 1/50, 1/100, 1mm, 0.5mm 1/10, 1/100, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 1mm, 0.5mm, 1mm, 0.5mm 263 •General's industrial quality Steel Rules are precision made with etched fine black graduations •General's industrial quality Steel Rules are precision made with etched fine black graduations for easy reading and long life •The two finishes available are polished stainless steel or satin chrome Features: Finish • Satin Chrome • Stainless Tempered noted • Black Chrome Rule, as Description 6" SS FLEX RULE 6" SS FLEX RULE 6"PRECISION SS RULE, FLEX 48"(4R) FLEX STEEL RULE 48"(16R) FLEX STEEL RULE 24"(5R) FULL FLEX STEEL RULE 24"(5R) FULL FLEX STEEL RULE - BLACK CHROME 24"(3R) FULL FLEX STEEL RULE 24" X 600 mm FULL FLEX STEEL RULE 600 mm FULL FLEX STEEL RULE 36"(4R) FLEX STEEL RULE 36"(16R) FLEX STEEL RULE 36"(5R) FLEX STEEL RULE 36" X 900 mm FLEX STEEL RULE 18"(16R) FULL FLEX STEEL RULE - BLACK CHROME 18"(5R) FULL FLEX STEEL RULE 18"(5R) FULL FLEX STEEL RULE - BLACK CHROME 18"(3R) FULL FLEX STEEL RULE 18" X 450 mm FULL FLEX STEEL RULE 450 mm FULL FLEX STEEL RULE 24"(4R) FULL FLEX STEEL RULE 24"(4R) FULL FLEX STEEL RULE - BLACK CHROME 24"(16R) FULL FLEX STEEL RULE 24"(16R) FULL FLEX STEEL RULE - BLACK CHROME 12" X 300 mm FULL FLEX STEEL RULE 12" X 300 mm FULL FLEX STEEL RULE - BLACK CHROME 12" X 300 mm FULL FLEX STEEL RULE 300 mm FULL FLEX STEEL RULE 300 mm FULL FLEX STEEL RULE - BLACK CHROME 18"(4R) FULL FLEX STEEL RULE 18"(4R) FULL FLEX STEEL RULE - BLACK CHROME 18"(16R) FULL FLEX STEEL RULE 150 mm FULL FLEX STEEL RULE 150 mm FULL FLEX STEEL RULE - BLACK CHROME 12"(4R) FULL FLEX STEEL RULE 12"(4R) FULL FLEX STEEL RULE - BLACK CHROME 12"(16R) FULL FLEX STEEL RULE 12"(16R) FULL FLEX STEEL RULE - BLACK CHROME 12"(5R) FULL FLEX STEEL RULE 12"(5R) FULL FLEX STEEL RULE - BLACK CHROME 12"(3R) FULL FLEX STEEL RULE 6"(5R) FULL FLEX STEEL RULE - BLACK CHROME 6"(5R) FULL FLEX STEEL RULE 6"(3R) FULL FLEX STEEL RULE - BLACK CHROME 6"(3R) FULL FLEX STEEL RULE RULE 6" X 150mm FULL FLEX STEEL RULE - CHROME 6" X 150mm FULL FLEX STEEL FINISH 6" X 150mm FULL FLEX STEEL RULE 6" X 150mm FULL FLEX STEEL RULE 6" X 150mm FULL FLEX STEEL RULE Description 6"(4R) FULL FLEX STEEL RULE - BLACK CHROME 6"(4R) FULL FLEX STEEL RULE 6"(16R) FULL FLEX STEEL RULE - BLACK CHROME 6"(16R) FULL FLEX STEEL RULE GENTOO 616 PartNo GENTOO 300/1 GENTOO 300ME MTI 182-415 MTI 182-416 MTI 182-412 MTI 182-414 MTI 182-264 MTI 182-265 MTI 182-271 MTI 182-411 MTI 182-413 MTI 182-266 MTI 182-262 MTI 182-268 MTI 182-263 MTI 182-267 MTI 182-244 MTI 182-245 MTI 182-251 MTI 182-261 MTI 182-246 MTI 182-242 MTI 182-248 MTI 182-243 MTI 182-247 MTI 182-226 MTI 182-231 MTI 182-210 MTI 182-141 MTI 182-218 MTI 182-224 MTI 182-225 MTI 182-220 MTI 182-221 MTI 182-217 MTI 182-222 MTI 182-219 MTI 182-223 MTI 182-206 MTI 182-207 MTI 182-208 MTI 182-211 MTI 182-209 MTI 182-215 MTI 182-205 MTI 182-216 MTI 182-202 MTI 182-214 MTI 182-203 MTI 182-213 MTI 182-204 PartNo MTI 182-201 MTI 182-212 Phone: 402-455-6151 Toll Free: 800-488-9699 Steel Rules Machinist - 6" Steel Rules - Series 182 Steel Rules Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Drive PinPunchesNo.565Series Automatic CenterPunchwithAdjustableStroke(18Series) Punches Machinists’ Levels(98Series) Levels STAR 52587 STAR 52586 STAR 52585 STAR 52584 STAR 52583 STAR 52582 STAR 52581 STAR 52580 STAR 52579 STAR 52578 PartNo STAR 70381 STAR 70380 STAR 50126 STAR 56752 STAR 50121 STAR 50120 STAR 50119 PartNo STAR 50442 STAR 50441 STAR 50440 PartNo locating pointisfrictionallyheldandeasilyreplaced.Range1/8"-13/4"(.3-44mm). instantly screwedintotheNo18BPunchshankinplaceofregularpoint.Itquicklyspacesdistanceswithinitsrange.The This 18SBhandyattachmentisusedwithourNo18BAutomaticCenterPunchforaccuratelyspacingcenterdistances.Itcanbe which maalsobeeasilyresharpenedorreplaced. The heavy-dutyNo.18Cmodeliscapableofstrikingamuchheavierblowthantheothersizesandhasone-piecepointshank and/or replacement.Allsizesareidenticalinstyle,differingonlythestrikingpower. constant somarksmadebythepointareuniformindepthandsizeforeachsetting.Thecanbeeasilyremovedregrinding Progressively lightermakesareobtainedbyturningthecapupward.Thetensionofspring,whichregulatesblow,is The adjustableknurledcapregulatestheforceofblow.Shouldaheavymarkberequired,isscreweddown. when downwardpressureisapplied.Nohammerrequired,makingonehandalwaysfreetosteadythework. Rugged automaticpuncheshaveall-steelhandlesandparts.Theseamechanismthatautomaticallystrikesblow •The speciallyselectedtoolsteelishardenedandtempered. •They arewell-proportionedforeaseofuse •These punchesandnailsetsareuniversallyused,butmostoftenbymachinistscarpenters •Punches andnailsetsformachinists,builderscarpenters PT02948 TIPSFORPUNCH18B PT02947 TIPSFORPUNCH18AAAND18A 18SB PUNCHATTACHMENT 18C PUNCH 18B PUNCH 18A PUNCH 18AA PUNCH Description S565PC DRIVEPINSET W/VINYLCASE,8PC. S565WB DRIVEPINSETW/WOODBOX8PC. 565H STARRETT5/16"DRIVE 565G STARRETT1/4"DRIVE 565F STARRETT7/32"DRIVE 565E STARRETT3/16"DRIVE 565D STARRETT5/32"DRIVE 565C STARRETT1/8"DRIVE 565B STARRETT3/32"DRIVE 565A STARRETT1/16"DRIVE Description 98-8 8"LEVEL,STARRETT 98-6 6"LEVEL,STARRETT 98-4 4"LEVEL,STARRETT Description •Starrett No.565DrivePinPunchesarewellproportioned,hardened,properlytempered,nicelyfinished,andhave closing covertopreventbreakage. •These vialsareadjustabletoapositivesettingandhousedinsatinfinishedbrasstubewithfrictionalfit vial. •The 12Inch(300Millimeters)modelalsohasaplumbvialandthe18(450double •All sizeshaveacrosstestvialexceptthe4Inch(100Millimeters)model •These levelshavegroundandgraduatedmainvials •4-18 Inch(100-450Millimeters) •Each punchhasthesizestampedonhead a knurledfingergrip 264 Dia. In.(mm) 11/16(17) 11/16(17) 9/16 (14) 7/16(11) Dia. PunchIn.(mm) - - - 7/32 (5.5) 3/32 (2.5) 1/16 (1.5) 5/16 (8) 3/16 (5) 5/32 (4) 1/4 (6) 1/8 (3) - - Lgth. In.(mm) 5 1/4(130) 5 1/4(130) Size In.(mm) Lgth. In.(mm) 5 (125) 4(100) 8(200) 6(150) 4(100) - - - 4 (100) 4 (100) 4 (100) 4 (100) 4 (100) 4 (100) 4 (100) 4 (100) - - Precision Tools 3(75) SET of 5 .500 Size In. Lgth. In. (mm) .200 and Pt. .200 and.500 - In.(mm) 1/16(1.5) 1/2 (13) 1/2 (13) 1/2 (13) Shank In. (mm) Top of Tapered Pt. Dia. End Single Double Double 265 •General's drill gages are used to quickly and conveniently identify drill bit sizes •Made of heat treated heavy gage steel, machined and ground to close tolerances •Hole sizes and decimal equivalents are permanently etched on the face •Nos.14, is 5 inches x 2 inches wide •No. 14 conforms to government specifications GG-G-86b •All sizes 3 inches long. •General's edge finders accurately locate working edges, shoulders, grooves, centerpoints and scribed lines •General's edge finders accurately locate working milling and other machines •Time-saving positioning tools for jig borers, tolerance •Hardened and centerless ground to precision Description DRILL GAGE 1/16-1/2 •Starrett 117 Center Punches are made of specially selected steel, hardened and properly tempered are made of specially selected steel, hardened •Starrett 117 Center Punches grip nicely finished and have a knurled finger •They are well proportioned, and the tips are accurately centered. at the proper angle to give maximum service, •The points are ground Description 117AA STARRETT 3-1/8"X3/16" S117PC STARRETT CENTR PUNCH SET Description EDGE FINDER SLG HD 1/2" EDGE FINDER DLB HD 1/2" EDGE FINDER DBLHD W/PT 1/2" PartNo GENTOO 14 PartNo GENTOO 260 GENTOO 262 GENTOO 264 STAR 50488 PartNo STAR 50482 Phone: 402-455-6151 Toll Free: 800-488-9699 Drill Gages Gages Edge Finders Punches (117 Series) Round Shanks Punches with Center Precision Tools MTI 64PPP794 Toll Free: 800-488-9699 Phone: 402-455-6151 Digital Protractor Steel Protractors Protractors Two PointScriber Tungsten CarbideScriberandMagnetScribers Pocket Scribers Scribers MTI SOAAA983 MTI 950-316 MTI 950-315 PartNo GENTOO 18 GENTOO 17 PartNo GENTOO 80 PartNo GENTOO 88P GENTOO 88 GENTOO 88CM PartNo STAR 72049 STAR 71527 STAR 70333 STAR 70332 STAR 56092 STAR 50327 STAR 50324 STAR 50323 PartNo MAGNETIC BASE RS-232C OUTPUTCABLE W/FOOTSWTICH10P-25P PRO 3600DIGITALPROTRACTOR PRO 360DIGITALPROTRACTOR Description PT19306 TUNGSTENCARBIDEPOINTFOR70AX PT14398 TUNGSTENCARBIDEPIONTFOR70AX PTO2355B STEELPOINTFOR70B PT02355A STEELPOINTFOR70A 70BX POCKETSCRIBERW/TUNGSTENCARBIDEPOINT 70AX POCKETSCRIBERW/TUNGSTENCARBIDEPOINT 70B SCRIBERW/STEELPOINT 70A POCKETSCRIBERW/STEELPOINT Description STEEL PROTRACTORRNDHEAD STEEL PROTRACTORSQHEAD Description •6 inchadjustableprotractorarmlocksintopositionwithknurledthumbnut. •3 3/8inchx2head •Permanently etchedgraduationsfrom0to180degreesinoppositedirections •Made ofgroundstainlesssteelforoptimumaccuracy •Preferred bymachinists,draftspeople,andmechanicsforsettingbevels •The scriberisheldfirmlyinthehandlebyaknurledchuckandwhennotusecanbereversedlocked •The scriberpointissteel,properlyhardenedandfinelytaperedsothatthelocationofnotobscured •The handleisofsteel,knurled,andnickelplated •RS232C output.(950-316,Pro3600 Model). • Displayremainsuprighttoview at allangles.(950-315,Pro360models). • Simplecalibrationrequiringnospecial fixtures. • Readinghold. • Alternatereference(zero). • Machinedaluminumframe. • Full360°range(90°x4). Features: are generatedbyanelectronicgravitysensorandprocessedthelatest low-powerelectroniccircuittechnology. These DigitalProtractorspresentinclinationvaluesonaneasy-to-read liquidcrystaldisplay.Themeasurements chuck. FIXED TWOPOINTSCRIBER Description TUNGSTEN POINTONLY-88&88CM TUNGSTEN POINTSCRIBERWO/MAGNET TUNGSTEN PTSCRIBEW/MAGNET Description •Overall length9inches •This scriberconsistsofshortstraightandbentpointswhichthreadintoknurledbody •Overall lengthis6". •Point isreplaceable •Scriber pointreversesforsafety places •Alnico permanentmagnetpicksupsmallpartsandretrievessteelchipsfromhard-to-reach •Tungsten carbidetipmarkshardmaterialsincludinghardenedsteel,ceramicsandglass 266 ±0.05° (0°to9.99°)±0.1°(80°90°)±0.2°(10° to 80°) ±0.1° Level±10°,Plumb±10°±0.2°Maxerror Accuracy - - Point Lgth.In.(mm) 2 7/8(72) 2 3/8(60) 2 7/8(72) 2 3/8(60) - - - - Square head Round head Style Handle Dia.In.(mm) 3/8(9.5) 1/4(6.4) 3/8(9.5) 1/4(6.4) - - - - Precision Tools REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR REGULAR Blade Finish SATIN CHROME SATIN CHROME SATIN CHROME SATIN CHROME Graduations 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 8ths, 16ths, Quick Reading 32nds, 64ths 1/2mm & 32nds one side;mm & 64ths, reverse side 1/2mm & 32nds one side;mm & 64ths, reverse side 267 Description 267 STARRETT TAPER GAGE Description 270 STARRETT TAPER GAGE These are named "taper" gages only because of their shape. They do not measure taper, but they do measure hole These are named "taper" gages only because of their shape. They do not measure taper, but and slot sized. They are quick to use very accurate, and are a convenient size. very useful for This gage is specially designed for rapid, accurate checking of inside diameters of tubing. Also general gaging of slot widths, hole sizes, setting calipers, etc. to 1 1/16" in 64ths This gage has thin, tapered leaves graduated to measure inside diameters or widths from 1/16" 5 1/4" long. of an inch. Ther are made of nicely finished spring-tempered steel, appoximately 1" wide by The Starrett No. 270 Taper Gage is a very useful tool, especially for bearing work and for gaging slots. The Starrett No. 270 Taper Gage is a very useful wide by 6 1/4" (160 mm) long and is accurately tapered The gage is made of quality tool steel 7/16" (11mm) measuring of slot widths, etc. throughout its entire length for quick and convenient been used as a precision shim. Although a bit expensive, this tool can and has 0.3 mm to 4 mm in One side is graduated from .010" to .150" in thousandths of on inch and the reverse side from one-twentieth of a mm (0.05mm). 12-18-4R STARRETT 18" BEVEL PROTRACTOR 12-24-4R STARRETT 24" BEVEL PROTRACTOR 12ME-300 STARRETT 300mm BEVEL PROTRACTOR 491-24-4R STARRETT 24" BEVEL PROTRACTOR 491ME-300 STARRETT 300mm BEVEL PROTRACTOR C490-12-4R STARRETT 12" BEVEL PROTRACTOR 490-12-4R STARRETT 12" BEVEL PROTRACTOR 490-18-4R STARRETT 18" BEVEL PROTRACTOR 490-24-4R STARRETT 24" BEVEL PROTRACTOR C12-12-4R STARRETT 12" BEVEL PROTRACTOR C12-12-4R W/SLC STARRETT 12" BEVEL PROTRACTOR 12-12-4R STARRETT 12" BEVEL PROTRACTOR Description C491-12-4R STARRETT 12" BEVEL PROTRACTOR 491-12-4R STARRETT 12" BEVEL PROTRACTOR 491-18-4R STARRETT 18" BEVEL PROTRACTOR PartNo STAR 51286 PartNo STAR 51292 STAR 66931 STAR 50103 STAR 50104 STAR 50105 STAR 50106 STAR 52511 STAR 52512 STAR 52513 STAR 64290 STAR 52521 STAR 52522 STAR 52523 STAR 52524 STAR 52514 PartNo STAR 64602 Phone: 402-455-6151 Toll Free: 800-488-9699 Taper Gage No. 267 Taper Gage No. 270 Gages Protractors • Tempered steel blades with accurate, machine-divided graduations. with accurate, machine-divided graduations. • Tempered steel blades comparable protractors. handy feature is not readily available on other when the base reference surface is level. This • A spirit level indicates scribed or measured left and right. scribed or measured left Features: Long-Life and Accuracy black finish. of attractive black wrinkle finish or smooth of stable cast iron and finished with a choice • Protractor heads are made Ease-of-Handling Features: Ease-of-Handling Features: faces the operator. choice of which graduated side on the blade • Reversible lock bolt allows of the workpiece. the frame, so the frame stays on the same side meaning the blade is on the outside of • The No. 12 is non-reversable, to be reversed so the same angle can be on both sides of the blade, allowing the tool 491 are reversible, meaning there is a shoulder • The No. 490 and No. Readability Features: Readability (on 12" sizes) reading are available protractor heads for easier chrome blades and • Starrett satin of angles and supplementary angles in opposite directions, permitting the direct reading • Direct reading 0-180° Starrett Bevel Protractor Starrett Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 U.S. StandardGage(Number283) Center Gages(Number391,C396andC398M) Screw PitchGages-EnglishandMetric Gages STAR 51318 PartNo STAR 51476 STAR 51478 STAR 51477 STAR 51475 PartNo STAR 52484 PartNo 392 CenterGage C398M CenterGage C396 CenterGage C391 CenterGage Description •They alsohaveaveryusefulscaleforfindingthenumberofthreadsperinchthroughgraduationsin14ths,20ths,24ths,and •Extremely handyforuseingrindingandsettingscrewcuttingtools,thesegagesmeetthefollowingstandards:American 32ths ofaninch. National orU.S.60º,WhitworthEnglish55º,andMetric60º 472 STARRETTSCREWPITCHGAGE,W/LOCKINGDEVICE Description •This gageismadetotheUnitedStatesStandardforuncoatedsheet, plateironandsteel,isbasedonweightsin corresponding toadefinitepitch,markedoneachleaf. •These gagesconsistofasubstantialsteelcasewithnumberfoldingleavesatbothends,eachleafhavingteeth •They quicklydeterminethepitchofvariousthreads •Starrett screwpitchgagesareamongthemostusefultoolsinanymechanics'toolbox •Nos. 0-36,.007-.3125"range •Carefully testedafterhardening •The gagehasasatinfinishanddecimalequivalentsonthereverseside ounces persquarefoot 283 STARRETTU.S.STDGAGE Description 268 American UnifiedMaterialStandard,60° American UnifiedMaterialStandard,60° Whitworth orEnglishstandard,55° Metric Standard,60° Type TPI RangeIn. 4 -84 Leaves No. of 51 Precision Tools Size 1/32", 1/64" Style Gage No. 0-36 Gage No. 0-36 Rule Graduation Square head Size Drill size A to Z 1.0 to 5.9mm 57 holes Drill Size 1/16" to 1/2" 1.5 to 12.5mm 30 holes Tap Size 2-56 to 1/4-28 30°, 45°, 60° Protractor Graduation Desc. - Gen. Am. Standard Wire Gage U.S. Standard Wire Gage 269 Features: • Head made of hardened steel. • Base surface measures 2 1/2" x 1/8" thick. • Includes 6" rule: 7/32" wide and .041" thick. • Includes 6" rod: 3/32" diameter. Features: • Each drill gage has a total of 29 holes marked with drill size in fractions and decimals. series. • Tap and drill gage shows the correct tap drill for National Fine or National Coarse thread • Approximate plate size is 6-3/8" x 2-1/2" x 5/64" Features: edges and notches.. • Hardened with lapped the American National and US 60° Standards. • Meets requirements of and 32nds on reverse side. 20ths graduations provided on one side, 24ths • Scales with 14ths and Description Center Gage Metric Drill Gage Drill Gage Description Tap and Drill Gage Drill Gage Metric Drill Gage Description Depth Gage, Adjustable Angle Description Standard Gage - Series 950 Standard Gage - Series 950 MTI 950-206 MTI 950-207 MTI 950-208 MTI 950-209 PartNo MTI 950-204 PartNo MTI 950-202 MTI 950-203 MTI 950-271 PartNo MTI 950-201 PartNo Phone: 402-455-6151 Toll Free: 800-488-9699 Standard Wire Gages Series 950 Standard Wire Gages Series Tap and Drill Gage Series 950 Depth Gage, Adjustable Angle Series 950 Depth Gage, Adjustable Angle Gages 950 Gage, Series Center Precision Tools Toll Free: 800-488-9699 Phone: 402-455-6151 Thickness GagesSeries184,950 Pitch GagesSeries188,950 Gages MTI 184-306 MTI 184-313 MTI 184-303 MTI 184-307 MTI 184-302 MTI 950-256 MTI 950-255 MTI 950-254 MTI 950-252 MTI 950-251 MTI 184-406 MTI 184-405 MTI 184-102 MTI 184-101 PartNo MTI 188-151 MTI 188-122 MTI 188-121 MTI 950-253 MTI 188-111 MTI 188-102 MTI 188-101 PartNo 6263Abbott Drive,68110 Fax:800-488-9720 Phone:800-488-9699 www.johnday.com Omaha Nebraska

Thickness Gage-Metric Thickness Gage-Metric Thickness Gage-Metric Thickness Gage-Metric Thickness Gage-Metric Thickness Gage Thickness Gage Thickness Gage Thickness Gage Thickness Gage Thickness Gage Thickness Gage Thickness Gage Thickness Gage Description leaves Pitch Gage-(30leaves);(21Total51 Pitch Gage-(21leaves) Pitch Gage-(18leaves) Pitch Gage-(51leaves) Pitch Gage-(30leaves) Pitch Gage-(28leaves) Pitch Gage-(30leaves) Description .0015"-.200" (13leaves) .0015"-.200" (15leaves) .0015"-.025" (18leaves) 0.05-0.8mm (10leaves) 0.03-0.5mm (13leaves) 0.03-0.5mm (13leaves) .0015-.025" (26leaves) .0015"-.015" (8leaves) .002"-.035" (26leaves) .002"-.025" (15leaves) .004"-.025" (22leaves) .0015"-.015" (9leaves) 0.05-1mm (28leaves) 0.05-1mm (28leaves) • Whitworth,UnifiedandMetricPitchGages. • Pitchsizeisstampedoneachgage. Features: Range John DayCompany 0.4, 0.5,0.75,1.0,1.25,2.0,2.5,3.0,4.0,4.5,5.0,5.5,6.0,6.5,7.0mm Straight 1/2"widthattip Straight 1/2"widthattip Straight 1/2"widthattip Straight 1/2"widthattip Tapered 1/4widthattip Above 18Leavesplus0.7,0.8,0.9mm Blade Type Tapered Tapered Tapered Straight Straight Straight Straight Straight Straight 270 4-42 TPIinch;0.4-7mm 4-84 TPI 4-42 TPI 4-60 TPI 4-42 TPI Range Lgth. In. 100mm 100mm 150mm 100mm 150mm 4-1/2" Blade (mm) 6" 3" 3" 3" 3" 3" 3" 3 .0015 thru.0055"by.0005"step,.006.010".001"stepplus.012,.015,.020,.025" .0015,.002,.003,.004,.006,.008,.010,.012,.015,.020,.030,.040,.075,.100,.200" .002,.003,.004,.005,.006,.008,.010,.012,.013,.015,.018,.019,.020,.022,.025 .002 thru.018"by.001"stepplus.022,.024,.025,.028,.030,.032,.035" .0015,.002,.003,.004,.006,.008,.010,.020,.030,.040,.075,.100,.200" 0.05 thru0.15mmby0.01mmstep0.021mm0.05mm 0.05 thru0.15mmby0.01mmstep0.210.05mm 0.05 thru0.2mmby0.05mmstep0.30.8mm0.1mm 0.03 thru0.1mmby0.01mmstepplus0.15,0.2,0.3,0.4,0.5mm 0.03 thru0.1mmby0.01mmstepplus0.15,0.2,0.3,0.4,0.5mm .002 thru.025by.001plus.0015&.0025 .0015,.002,.003,.004,.008,.010,.012,.015" .0015,.002,.003,.004,.008,.010,.012,.015" .004 thru.025"by.001"step Composition ofleaves Unified 60°(30leaves);Metric(21leaves) Whitworth 55° Whitworth 55° Desc. -Gen. Unified 60° Unified 60° Metric 60° Metric 60° Precision Tools ------#0 Phillips Blade No. - AA-F AA-E .080(2) .025(0.6) .055(1.4) .070(1.8) .100(2.5) - Range Blade Width In. (mm) 0-.040"(0-1mm) .030-.062"(0.8-1.6mm) .050-.125"(1.3-3.2mm) .115-.187"(2.9-4.8mm)

271 Call 800-488-9699. Added Training/Seminars at the John Day Company Take advantage of the Value

out. Handles and binding nuts are nickel plated. handles so that the wires of any length and any diameter up to the The hole extends through the full length of the full size of the tool can be held. size so that they can be rapidly rotated between thumb and finger Then handles of these pin vises are reduced in when filing small work. Starrett pin vises are useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, and Starrett pin vises are useful for securely holding a few turns of the binding nut, a firm grip may be obtained. other tools. The jaws on all are hardened and with •Starrett screwdrivers are made for relatively small and very delicate work. relatively small and very are made for •Starrett screwdrivers Common Features: chrome plated. steel, nicely knurled, and either nickel or •The bodies are made from and nickel plated. the best quality steel, properly tempered •The blades are made from locks in place, so it will not turn or come slight turn of the knurled chucks securely •All blades are replaceable-a 555AA SCREW DRIVER 555B SCREW DRIVER 555C SCREW DRIVER 555D SCREW DRIVER 555E SCREW DRIVER 555F SCREW DRIVER S555Z-6 STARRETT JEWELERS S555Z-7 STARRETT JEWELERS Description Description 162A STARRETT PIN VISE 162B STARRETT PIN VISE 162C STARRETT PIN VISE 162D STARRETT PIN VISE S162Z SET OF 4 PIN VISES IN VINYL CASE STAR 50604 PartNo STAR 50599 STAR 50600 STAR 50601 STAR 50602 STAR 52564 STAR 52566 STAR 52551 STAR 52552 STAR 52553 STAR 52554 STAR 52561 PartNo STAR 52549 Phone: 402-455-6151 Toll Free: 800-488-9699 Pin Vises No. 162 Series Pin Vises Jewelers’ Screwdrivers Jewelers’ (555 Series) Screwdrivers Jewelers’