List of Chemical Resistance of Materials in Contact with Liquid ANALYSETTE 22 Next & ANALYSETTE 28 Imagesizer LASER PARTICLE SIZER & PARTICLE SIZER

Total Page:16

File Type:pdf, Size:1020Kb

List of Chemical Resistance of Materials in Contact with Liquid ANALYSETTE 22 Next & ANALYSETTE 28 Imagesizer LASER PARTICLE SIZER & PARTICLE SIZER List of chemical resistance of materials in contact with liquid ANALYSETTE 22 NeXT & ANALYSETTE 28 ImageSizer LASER PARTICLE SIZER & PARTICLE SIZER This chart information is based on FRITSCH's knowledge and experience and are intended as a guide and not as a guarantee. We cannot assure the perfect performance of the materials as that depends on many factors as working pressure, pressure picks, fluid, ambient temperature, fluid temperature, concentra‐ tion, duration of exposure, etc… Fritsch GmbH Milling and Sizing Industriestrasse 8 D - 55743 Idar-Oberstein Telephone: +49 (0) 6784/ 70-0 Email: [email protected] Internet: www.fritsch.de Version 04/2020 Index 001 Table of contents Table of contents 1 Materials in contact with liquid.................................................... 4 2 Abbreviations................................................................................. 5 3 List of chemical resistance............................................................. 7 3.1 KEY......................................................................................... 7 3.2 Note....................................................................................... 7 3.3 Table 1.................................................................................... 7 3.4 Table 2.................................................................................. 97 3.5 Table 3................................................................................ 105 - 3 - Materials in contact with liquid 1 Materials in contact with liquid Wet dispersion units Materials used in the sample circuit: stainless steel¹, PTFE (Teflon)²,N-BK7 glass, Viton®², Wet dispersion unit (22.9200.00 & 28.2500.00) Viton® Extreme³, POMª, Brass, Silicone hoses (LEZ-SIL 60 PFT)º FFKM (Kalrez®)³: replaces Viton®² & Viton® Extreme³; TPE "Conversion Kit Extended" for extreme chemical resist- (LEZ-SAN Santoprene®)³: replaces Silicone hoses (LEZ-SIL ance (22.9287.00 & 22.9288.00) 60 PFT) ¹ See Table 1 and Table 2 ² See Table 2 ³ See Table 1 º See Table 2 (Silicone (peroxide/ platinum- cured)) ª See Table 3 - 4 - Abbreviations 2 Abbreviations ASTM D1418 Abbreviation Chemical name Trade names PPE Prefix Europrene-AR®, Krynac®, ACM Polyacrylate (Polyacrylic) Nipolar®, Hycar®, Cyan- P acryl®, Noxtite-PA® AEM Ethylene Acrylic Vamac® W W Vibrathane®, Pellethane®, Polyester Urethane Poly- Urepan®, Elastothane®, AQU / EU Q ether Urethane Adiprene®, Desmopan®, Vulkollan®, Estane® Neoprene®, Skyprene®, CR Chloroprene Butclor®, Baypren®, C Denka® Chlorosulphonylpolyethy- CSM lene (Chlorosulphonated Hypalon®, Noralon® L polyethylene) Hydrin®, Herclor®, ECO Epichlorohydrin H Gechron® Ethylene-Propylene Buna-AP®, Dutral®, Epsyn®, EPD / EPDM Copolymer, Ethylene-Pro- Nordel®, Epcar®, Keltan®, E pylene Terpolymer Royalene®, Polysar-EDM® Fluoroethylene Propylene, Teflon FEP®, Neoflon FEP®, FEP / PFA D Perfluoroalkoxy Teflon PFA®, Neoflon PFA® Aflas®, Dyneon BRE®; Viton FEPM See TFE/P A Extreme® FFKM/FFPM* Perfluoroelastomer Perlast®, Kalrez®, Chemraz® G Viton®, Dai-el®, Fluorel®, FKM/FPM* Fluoroelastomer V Tecnoflon® FVMQ Fluorosilicone Silastic, LS®, FSE® F Breon, Butakon®, Chem- igum®, Hycar®, Buna-N®, Nitrile Butadine, Carboxy- NBR / XNBR Butacril®, Paracil®, Per- N lated Nitrile bunan®, Krynac®, Euro- prene-N®, Nipol® HNBR Hydrogenated Nitrile Therban®, Tornac®, Zetpol® Z Exxon Butyl®, Polysar IIR Butyl Rubber J Butyl®, Esso Butyl® IR Isoprene Shell Isoprene Rubber® R NR Natural Rubber Natsyn® R POM Polyoxymethylene - 5 - Abbreviations ASTM D1418 Abbreviation Chemical name Trade names PPE Prefix Cariflex S®, Plioflex®, Euro- SBR Styrene Butadine (Buna-S) prene®, Pliolite®, Buna B Huls®, Carom®, Solprene® Tetrafluoroethylene/Propy- TFE/P Aflas®, Flourel ll®, Fluoraz® A lene Thermoplastisches Elas- TPE LEZ-SAN Santoprene® tomer Silastic®, Siloprene®, Rho- VMQ / PVMQ Silicone S dorsil®, Silplus® - 6 - List of chemical resistance 3 List of chemical resistance 3.1 KEY A - No effect; little noticeable change B - Minor effect; slight corrosion or discoloration C - Moderate effect; not recommended for continuous use;softening, loss of strength, swelling and/or shrinkage D - Severe effect; not recommended for use; severe softening, swelling and/or shrinkage 3.2 Note The CHEMICAL PROPERTIES of N-BK7 glass see: https:// www.schott.com/d/advanced_optics/c36214d9-13c4-468c- bf40-8d438b89f532/1.30/schott-optical-glass-pocket-catalog-jan-2020- row.pdf 3.3 Table 1 FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Abietic Acid A A Acetaldehyde D A A D A Acetamide C C A A A Acetanilide C A Acetic Acid, 30% A A A A Acetic Acid, 5% A A A A A Acetic Acid, Gla- B A A A A cial Acetic Acid, Hot, D B A A High Pressure Acetic Anhydride D C A A A Acetoacetic Acid C C A A Acetone D B A A A Acetone Cyano- C B A A hydrin - 7 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Acetonitrile A B A A C Acetophenetidine A A Acetophenone D C A B Acetotoluidide A A Acetyl Acetone D A A A Acetyl Bromide A A D Acetyl Chloride A A A D A Acetylene A A A A A Acetylene Tetra- A A A bromide Acetylene Tetra- A A A D chloride Acetylsalicylic A A A Acid Acids, Non- A A organic Acids, Organic A A Aconitic Acid A Acridine A Acrolein C C A A Acrylic Acid A B A Acrylonitrile C C B D Adipic Acid A B B Aero Lubriplate A A A Aero Shell 17 A A A Grease Aero Shell 750 A A A Aero Shell 7A A A A Grease Aero Shell IAC A A A Aerosafe 2300 D C B Aerosafe 2300W D C B - 8 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aerozene 50 D C B (50% Hydrazine 50% UDMH) Air, Below 200ºF A A A Air, 200 - 300ºF A A D Air, 300 - 400ºF A A Air, 400 - 500ºF C B Aliphatic Dicar- A A D boxylic Acid Alkanes (Paraffin A A A Hydrocarbons) Alkanesulfonic A A Acid Alkazene B A A Alkenes (Olefin A A A Hydrocarbons) Alkyl Acetone C C A Alkyl Alcohol A A A Alkyl Amine A B B Alkyl Aryl Sulfo- A A nates Alkyl Aryl Sul- A A fonics Alkyl Benzene A A A Alkyl Chloride A A A Alkyl Sulfide* A A Alkylnaphthalene A A Sulfonic Acid Allyl Chloride A A C Allylidene Diace- C B tate Alpha Picoline C A Aluminum Ace- D C A A tate - 9 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aluminum Bro- A A A A mide Aluminum Chlo- C A A A rate Aluminum A A A A B Chloride Aluminum Eth- A A ylate Aluminum Fluo- A A A C ride Aluminum Fluo- A A rosilicate* Aluminum For- C C A A mate Aluminum B A A A B Hydroxide Aluminum Lino- A A A leate Aluminum A A A A A Nitrate Aluminum Oxa- C A late Aluminum Phos- A A A phate Aluminum Potas- C A A B sium Sulfate Aluminum Salts A A A A Aluminum C A A Sodium Sulfate Aluminum Sulfate A A A A B Alums-NH3 -Cr -K D A A Ambrex 33 A A A (Mobil) Ambrex 830 A A A (Mobil) Amines-Mixed D C A C A Aminoanthraqui- A none - 10 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aminoazoben- A A zene Aminobenzene A Sulfonic Acid Aminobenzoic A Acid Aminopyridine A Aminosalicylic A Acid Ammonia (Anhy- D B A A drous) Ammonia and D Lithium Metal in Solution Ammonia, Gas, D A Cold Ammonia, Gas, D A Hot Ammonia, Liquid D A (Anhydrous) Ammonium Ace- C C A A tate Ammonium C A Arsenate Ammonium Ben- C A zoate Ammonium C C A Bicarbonate Ammonium Bisul- C A fite Ammonium Bro- A A mide Ammonium Car- C A bamate Ammonium Car- A A A A bonate Ammonium A A A A C Chloride, 2N - 11 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Cit- C A rate Ammonium C A Dichromate Ammonium C A A Diphosphate Ammonium Fluo- A A B ride Ammonium Fluo- A rosilicate* Ammonium For- C A mate Ammonium C A B A A Hydroxide, 3 Molar Ammonium D A B A A Hydroxide, Con- centrated Ammonium A A Iodide Ammonium Lac- C A tate Ammonium Met- C A aphosphate Ammonium C A Molybdenate* Ammonium A A A A Nitrate, 2N Ammonium A A A Nitrite Ammonium Oxa- C A A late Ammonium Per- C A chlorate Ammonium Per- A chloride Ammonium Per- A A A A sulfate 10% - 12 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Per- A A sulfate Solution Ammonium D A A Phosphate Ammonium A A A Phosphate, Dibasic Ammonium A A A Phosphate, Mono-Basic Ammonium A A A Phosphate, Tri- basic Ammonium C A Phosphite Ammonium Pic- C A rate Ammonium Poly- C A sulfide Ammonium Sali- C A cylate Ammonium Salts C B A A Ammonium Sul- C C A famate Ammonium Sul- D A A A B fate Ammonium Sul- D A fate Nitrate Ammonium Sul- D A A fide Ammonium Sul- C A A A fite Ammonium Thio- C A A cyanate Ammonium Thio- C A glycolate Ammonium Thio- C A A A A sulfate - 13 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Tung- C A state Ammonium Val- C A erate Amyl Acetate D B A D A Amyl Alcohol B A A A A Amyl Borate A A A Amyl Butyrate A A A Amyl Chloride A A A D B Amyl Chloro- A A A naphthalene Amyl Cinnamic A C A Aldehyde Amyl Laurate A A A Amyl Mercaptan A A A Amyl Naphtha- A A A lene Amyl Nitrate C A Amyl Phenol A A Amyl Propionate A A A Anderol, L- 826 A A A (di-ester) Anderol, L- 829 A A A (di-ester) Anderol, L-774 A A A (di-ester) ANG-25 (Di-ester A A Base) (TG749)
Recommended publications
  • Standard X-Ray Diffraction Powder Patterns
    NBS MONOGRAPH 25 — SECTION 1 Standard X-ray Diffraction U.S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS THE NATIONAL BUREAU OF STANDARDS Functions and Activities The functions of the National Bureau of Standards are set forth in the Act of Congress, March 3, 1901, as amended by Congress in Public Law 619, 1950. These include the development and maintenance of the national standards of measurement and the provision of means and methods for making measurements consistent with these standards; the determination of physical constants and properties of materials; the development of methods and instruments for testing materials, devices, and structures; advisory services to government agencies on scien- tific and technical problems; invention and development of devices to serve special needs of the Government; and the development of standard practices, codes, and specifications. The work includes basic and applied research, development, engineering, instrumentation, testing, evaluation, calibration services, and various consultation and information services. Research projects are also performed for other government agencies when the work relates to and supplements the basic program of the Bureau or when the Bureau's unique competence is required. The scope of activities is suggested by the listing of divisions and sections on the inside of the back cover. Publications The results of the Bureau's research are published either in the Bureau's own series of publications or in the journals of professional and scientific societies. The Bureau itself publishes three periodicals available from the Government Printing Office: The Journal of Research, published in four separate sections, presents complete scientific and technical papers; the Technical News Bulletin presents summary and preliminary reports on work in progress; and Basic Radio Propagation Predictions provides data for determining the best frequencies to use for radio communications throughout the world.
    [Show full text]
  • Press Release
    Press Release Amsterdam, The Netherlands / 6 November 2020 OCI Selected as Biofuel Supplier for Esso petrol in the United Kingdom OCI N.V. (Euronext: OCI) today announced that it has reached an agreement with Esso Petroleum Company, Limited (Esso), a subsidiary of Exxon Mobil Corporation, to supply a biofuel alcohol mix consisting of bio-methanol and ethanol, which will be blended with Esso’s standard Synergy grade petrol sold in the United Kingdom. The superior performance provided by OCI’s alcohol mix enables its customers to exceed mandated biofuel blending targets set by the UK and the EU without the introduction of a new fuel standard such as E10. OCI’s bio-methanol is an advanced biofuel that reduces greenhouse gas emissions compared to conventional petrol. Bio-methanol has a number of advantages: 1. Unlike ethanol which is primarily derived from food crops such as corn, wheat or sugar, bio-methanol is an advanced, second generation biofuel derived from bio-methane sourced from organic waste put into municipal landfills or anaerobic digesters. As such, in addition to the advantage that the use of bio-methanol results in lower consumption of fossil fuels, it provides an outlet for bio-waste, contributing to the circular economy and reducing methane emissions into the atmosphere. 2. Traditional methanol derived from natural gas has already long been used in auto racing to boost octane and deliver superior engine performance. Bio-methanol delivers the same benefits, while offering greenhouse gas (GHG) savings of more than 60% versus petrol derived from fossil fuels (volume for volume). Ahmed El-Hoshy, Chief Executive Officer of OCI NV, commented: “Through our cooperation with ExxonMobil, we aim to promote the use of bio-methanol as a complimentary biofuel alongside ethanol to reduce the carbon intensity of road transportation fuels.
    [Show full text]
  • Chemistry: the Molecular Nature of Matter and Change
    REVISED CONFIRMING PAGES The Components of Matter 2.1 Elements, Compounds, and 2.5 The Atomic Theory Today 2.8 Formula, Name, and Mass of Mixtures: An Atomic Overview Structure of the Atom a Compound 2.2 The Observations That Led to Atomic Number, Mass Number, and Binary Ionic Compounds an Atomic View of Matter Atomic Symbol Compounds That Contain Polyatomic Mass Conservation Isotopes Ions Definite Composition Atomic Masses of the Elements Acid Names from Anion Names Multiple Proportions 2.6 Elements: A First Look at the Binary Covalent Compounds The Simplest Organic Compounds: Dalton’s Atomic Theory Periodic Table 2.3 Straight-Chain Alkanes Postulates of the Atomic Theory Organization of the Periodic Table Masses from a Chemical Formula How the Atomic Theory Explains Classifying the Elements Representing Molecules with a the Mass Laws Compounds: An Introduction 2.7 Formula and a Model to Bonding 2.4 The Observations That Led to Mixtures: Classification and the Nuclear Atom Model The Formation of Ionic Compounds 2.9 Separation Discovery of the Electron and The Formation of Covalent An Overview of the Components of Its Properties Compounds Matter Discovery of the Atomic Nucleus (a) (b) (right) ©Rudy Umans/Shutterstock IN THIS CHAPTER . We examine the properties and composition of matter on the macroscopic and atomic scales. By the end of this chapter, you should be able to • Relate the three types of matter—elements or elementary substances, compounds, and mixtures—to the simple chemical entities that they comprise—atoms, ions, and molecules;
    [Show full text]
  • Bimetallic Catalyst Catalyzed Carbonylation of Methanol to Acetic Acid
    materials Article Study on Rh(I)/Ru(III) Bimetallic Catalyst Catalyzed Carbonylation of Methanol to Acetic Acid Shasha Zhang 1, Wenxin Ji 1,2,*, Ning Feng 2, Liping Lan 1, Yuanyuan Li 1,2 and Yulong Ma 1,2 1 College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan 750021, China; [email protected] (S.Z.); [email protected] (L.L.); [email protected] (Y.L.); [email protected] (Y.M.) 2 State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, Ningxia University, Yinchuan 750021, China; [email protected] * Correspondence: [email protected]; Tel.: +86-135-1957-9989; Fax: +86-951-206-2323 Received: 13 July 2020; Accepted: 3 September 2020; Published: 11 September 2020 Abstract: In this study, a Rh(I)/Ru(III) catalyst with a bimetallic space structure was designed and synthesized. The interaction between the metals of the bimetallic catalyst and the structure of the bridged dimer can effectively reduce the steric hindrance effect and help speed up the reaction rate while ensuring the stability of the catalyst. X-ray photoelectron spectroscopy (XPS) results show that rhodium accepts electrons from chlorine, thereby increasing the electron-rich nature of rhodium and improving the catalytic activity. This promotes the nucleophilic reaction of the catalyst with methyl iodide and reduces the reaction energy barrier. The methanol carbonylation performance of the Rh/Ru catalyst was evaluated, and the results show that the conversion rate of methyl acetate and the yield of acetic acid are 96.0% under certain conditions. Furthermore, during the catalysis, no precipitate is formed and the amount of water is greatly reduced.
    [Show full text]
  • Not for Quotation Without Permission of the Author
    NOT FOR QUOTATION WITHOUT PERMISSION OF THE AUTHOR DECISION CASE STUDY UNITED KINGDOM MOSSMORRAN-BWFOOT BAY Sally M. Macgill July 1982 CP-82- 4 0 Collaborative Papers report work which has not been performed solely at the International Institute for Applied Systems Analysis and which has received only limited review. Views or opinions expressed herein do not necessarily represent those of the Insti- tute, its National Member Organizations, or other organizations supporting the work. INTERNATIONAL INSTITUTE FOR APPLIED SYSTEMS ANALYSIS 2361 Laxenburg, Austria CONTENTS CHAPTER 1 : INTRODUCTION 1.1. Perspective 1.2. Status of Report 1.3. Outline CHAPTER 2 : THE DECISION STRUCTURE 2.1. Context for the Developments 2.2. Site Choice 2.3. The Main Parties to the Decision 2.4. The Main Events in the Decision Process CHAPTER 3: THE DIMENSIONS OF THE DECISION 3.1. Statement of Dimensions 3.2. National Benefits 3.3. Local Socio-Economic Benefits 3.4. Health and Safety Aspects 3.5. Environmental Impacts CHAPTER 4 : PARTY PERSPECTIVES ON VARIOUS DIMENSIONS 4.1. Overview of Conflicts 4.2. The Oil Companies: Shell and Esso 4.2.1. National Benefits 4.2.2. Local Socio-Economic Benefits 4.2.3. Health and Safety 4.2.4. Environment 4.3. The Scottish Development Department 4.4. Departments of Energy and Industry 4.5. The Local Authorities: Fife, Dunfermline and Kirkcaldy 4.5.1. National Benefits 4.5.2. Local Socio-Economic Effects 4.5.3. Health and Safety 4.5.4. Environment 4.6. The Forth Ports Authority 4.7. The Health and Safety Executive 4.8.
    [Show full text]
  • Molecular Rearrangements in the Camphor Series : the Decomposition Products of the Methyl Ester of Isoaminocamphonanic Acid
    MOLECULAR REARRANGEMENTS IN THE CAMPHOR SERIES. THE DECOMPOSITION PRODUCTS OF THE METHYL ESTER OF ISOAMINOCAMPHONANIC ACID. BY GLENN SEYMOUR SKINNER A. B. Kansas State Manual Training Normal, 1913 A. M. University of Illinois, 1915 THESIS Submitted in Partial Fulfillment of the Requirements for the Degree of DOCTOR OF PHILOSOPHY IN CHEMISTRY IN THE GRADUATE SCHOOL OF THE UNIVERSITY OF ILLINOIS 1917 Digitized by the Internet Archive in 2013 http://archive.org/details/molecularrearranOOskin SK3 UNIVERSITY OF ILLINOIS THE GRADUATE SCHOOL .191 7 I HEREBY RECOMMEND THAT THE THESIS PREPARED UNDER MY SUPER- VISION BY .QleiirL...S.eymo.nr.....S.]s;i.nner ENTITLED .MQlficulax....E.earrii.ng_meiits in... the .G.amj2hgr....Se^^^^ The I)ejG.QiQ.p.Q.ai.t.i.o.rL...I!r.Q.d.iL.c.t.s Q±....tha.JvIe.l]i3fl....B.st.e..r o.t.....Is..oanDn.ocam^^^^^ Acid. BE ACCEPTED AS FULFILLING THIS PART OF THE REQUIREMENTS FOR THE DEGREE OF.. .J).Q.C..1i.QX._..Q±....PJlilQ.S..Q.p.llZ. In ChargeCI of Thesis Head of Department Recommendation concurred in :* .<:. TSr:^. Committee on Final Examination* *Required for doctor's degree but not for master's. •^L^n .X o o TABLE OF GONTEIITS. PART I. HISTORICAL. The Camphors ------------------------- 1 The Camphoric Acids --------------------- 2 The Methyl Esters of d-Camphoric and 1-Isocaraphoric Acid - - - 3 The Methyl Esters of d-Camphoramidic and l-Isocamphoramidic Acids 4 The d-Oamphoramidic and 1- Is o camphoramidic Acids ------- 6 The Amino Acids Which are Derived from the d-Gamphoramidic and 1-Isocamphoramidic Acids ---------- 7 The Methyl Esters of the Amino Acid-S - -- -- -- -- -- -- 8 The Decomposition Products of Amino Camphonanic Acid ----- 8 The Decomposition Products of Dihydroaminocampholytic Acid - - 10 The Decomposition of Isoaminocamphonanic Acid ----- - 15 The Decomposition of Isodihydr oaminocampholytic Acid ----- 15 The Unsaturated Acids- -------------------- 1^ The Hydroxy Acids- ---------------------- 1^ The Hydrocarbons ----------------------- 22 The Lactones ------------------------- PART II.
    [Show full text]
  • Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880
    University of Calgary PRISM: University of Calgary's Digital Repository University of Calgary Press University of Calgary Press Open Access Books 2019-04 Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880 Taylor, Graham D. University of Calgary Press Taylor, G. D. (2019). Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880. "University of Calgary Press". http://hdl.handle.net/1880/110195 book https://creativecommons.org/licenses/by-nc-nd/4.0 Downloaded from PRISM: https://prism.ucalgary.ca IMPERIAL STANDARD: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880 Graham D. Taylor ISBN 978-1-77385-036-8 THIS BOOK IS AN OPEN ACCESS E-BOOK. It is an electronic version of a book that can be purchased in physical form through any bookseller or on-line retailer, or from our distributors. Please support this open access publication by requesting that your university purchase a print copy of this book, or by purchasing a copy yourself. If you have any questions, please contact us at [email protected] Cover Art: The artwork on the cover of this book is not open access and falls under traditional copyright provisions; it cannot be reproduced in any way without written permission of the artists and their agents. The cover can be displayed as a complete cover image for the purposes of publicizing this work, but the artwork cannot be extracted from the context of the cover of this specific work without breaching the artist’s copyright. COPYRIGHT NOTICE: This open-access work is published under a Creative Commons licence.
    [Show full text]
  • Cosmetic Ingredient Hotlist - Canada.Ca
    9/25/2018 Cosmetic Ingredient Hotlist - Canada.ca Home Health Product safety Consumer Product Safety Cosmetics Cosmetic Ingredient Hotlist: Prohibited and Restricted Ingredients Cosmetic Ingredient Hotlist For assistance on the Ingredient Hotlist, please refer to "How to read the Cosmetic Ingredient Hotlist" 2018 List of Ingredients that are Prohibited for Use in Cosmetic Products List of Ingredients that are Restricted for Use in Cosmetic Products List of Ingredients that are Prohibited for Use in Cosmetic Products # A B C D E F G H I J L M N O P R S T U V W X Y Z CAS (Chemical Abstracts Service) (including but not limited to) Synonyms and Related Compounds Ingredient 1 (including but not limited to) 2 1,2-Epoxybutane 106-88-7 1,3-Butadiene 106-99-0 1,3-Dimethylpentylamine and its salts 105-41-9 11-α-Hydroxypregn-4-ene-3,20-dione and its esters 80-75-1 1- and 2-Naphthylamines and their salts 134-32-7; 91-59-8 1-Butyl-3-(N-crotonoylsulfanilyl) urea 52964-42-8 2-Butenamide, N-[4- [[[(butylamino)carbonyl]amino]sulfonyl]phenyl]-; Crotonoylcarbutamide; Crotulin 1-Methoxy-2,4-diaminobenzene and its salts 615-05-4 2,4-diaminoanisole; Cl 76050 1-Methoxy-2,5-diaminobenzene and their salts 5307-02-8 2,5-diaminoanisole 2-(4-Allyl-2-methoxyphenoxy)-N,N-diethylacetamide and its salts 305-13-5 Estil 2-(4-Methoxybenzyl-N-(2-pyridyl)amino) ethyldimethylamine maleate 59-33-6 2,3,7,8-Tetrachlorodibenzo-p-dioxin 1746-01-6 2,3-Dichloro-2-methylbutane 507-45-9 Amylene dichloride 2,4-Diaminophenylethanol and its salts 14572-93-1 1 Cells in this column are left blank when the substance does not have a known CAS.
    [Show full text]
  • Corporate Tax Avoidance Submission
    name jurisdiction_dincorporation_date ibcRUC node_id sourceID 1 ESSO (BM-S-EIGHT) BRAZIL EXPLORATION LIMITED Bahamas 19-Jul-06 144579B 20144579 Bahamas Leaks 2 ESSO (BM-S-ELEVEN) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144827B 20144827 Bahamas Leaks 3 ESSO (BM-S-NINE) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144831B 20144831 Bahamas Leaks 4 ESSO (BM-S-TEN) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144830B 20144830 Bahamas Leaks 5 ESSO (BM-S-TWENTY TWO) BRAZIL EXPLORATION LIMITED Bahamas 25-Jan-00 102571B 20102571 Bahamas Leaks 6 ESSO (BM-S-TWENTY-FOUR) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144829B 20144829 Bahamas Leaks 7 ESSO (BM-S-TWENTY-ONE) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144828B 20144828 Bahamas Leaks 8 ESSO (ROUND NINE) BRAZIL EXPLORATION LIMITED Bahamas 2-Nov-07 151113B 20151113 Bahamas Leaks 9 ESSO ANGOLA (THIRTY) LIMITED Bahamas 1-Sep-99 95609B 20095609 Bahamas Leaks 10 ESSO ANGOLA (TWENTY EIGHT) LIMITED Bahamas 1-Sep-99 95607B 20095607 Bahamas Leaks 11 ESSO ANGOLA (TWENTY NINE) LIMITED Bahamas 1-Sep-99 95608B 20095608 Bahamas Leaks 12 ESSO ANGOLA (TWENTY SEVEN) LIMITED Bahamas 1-Sep-99 95606B 20095606 Bahamas Leaks 13 ESSO ANGOLA (TWENTY SIX) LIMITED Bahamas 1-Sep-99 95610B 20095610 Bahamas Leaks 14 ESSO ANGOLA GAS COMPANY LIMITED Bahamas 16-Jan-01 117958B 20117958 Bahamas Leaks 15 ESSO ANGOLA INVESTMENTS LIMITED Bahamas 20-Aug-01 120962B 20120962 Bahamas Leaks 16 ESSO BOLIVA LIMITED Bahamas 11-Aug-95 35376B 20035376 Bahamas Leaks 17 ESSO BRAZIL INVESTMENTS LIMITED Bahamas 30-Nov-00 116707B 20116707
    [Show full text]
  • Gasket Chemical Services Guide
    Gasket Chemical Services Guide Revision: GSG-100 6490 Rev.(AA) • The information contained herein is general in nature and recommendations are valid only for Victaulic compounds. • Gasket compatibility is dependent upon a number of factors. Suitability for a particular application must be determined by a competent individual familiar with system-specific conditions. • Victaulic offers no warranties, expressed or implied, of a product in any application. Contact your Victaulic sales representative to ensure the best gasket is selected for a particular service. Failure to follow these instructions could cause system failure, resulting in serious personal injury and property damage. Rating Code Key 1 Most Applications 2 Limited Applications 3 Restricted Applications (Nitrile) (EPDM) Grade E (Silicone) GRADE L GRADE T GRADE A GRADE V GRADE O GRADE M (Neoprene) GRADE M2 --- Insufficient Data (White Nitrile) GRADE CHP-2 (Epichlorohydrin) (Fluoroelastomer) (Fluoroelastomer) (Halogenated Butyl) (Hydrogenated Nitrile) Chemical GRADE ST / H Abietic Acid --- --- --- --- --- --- --- --- --- --- Acetaldehyde 2 3 3 3 3 --- --- 2 --- 3 Acetamide 1 1 1 1 2 --- --- 2 --- 3 Acetanilide 1 3 3 3 1 --- --- 2 --- 3 Acetic Acid, 30% 1 2 2 2 1 --- 2 1 2 3 Acetic Acid, 5% 1 2 2 2 1 --- 2 1 1 3 Acetic Acid, Glacial 1 3 3 3 3 --- 3 2 3 3 Acetic Acid, Hot, High Pressure 3 3 3 3 3 --- 3 3 3 3 Acetic Anhydride 2 3 3 3 2 --- 3 3 --- 3 Acetoacetic Acid 1 3 3 3 1 --- --- 2 --- 3 Acetone 1 3 3 3 3 --- 3 3 3 3 Acetone Cyanohydrin 1 3 3 3 1 --- --- 2 --- 3 Acetonitrile 1 3 3 3 1 --- --- --- --- 3 Acetophenetidine 3 2 2 2 3 --- --- --- --- 1 Acetophenone 1 3 3 3 3 --- 3 3 --- 3 Acetotoluidide 3 2 2 2 3 --- --- --- --- 1 Acetyl Acetone 1 3 3 3 3 --- 3 3 --- 3 The data and recommendations presented are based upon the best information available resulting from a combination of Victaulic's field experience, laboratory testing and recommendations supplied by prime producers of basic copolymer materials.
    [Show full text]
  • Harmonized Tariff Schedule of the United States (2020) Revision 14 Annotated for Statistical Reporting Purposes
    Harmonized Tariff Schedule of the United States (2020) Revision 14 Annotated for Statistical Reporting Purposes SECTION VI PRODUCTS OF THE CHEMICAL OR ALLIED INDUSTRIES VI-1 Notes 1. (a) Goods (other than radioactive ores) answering to a description in heading 2844 or 2845 are to be classified in those headings and in no other heading of the tariff schedule. (b) Subject to paragraph (a) above, goods answering to a description in heading 2843, 2846 or 2852 are to be classified in those headings and in no other heading of this section. 2. Subject to note 1 above, goods classifiable in heading 3004, 3005, 3006, 3212, 3303, 3304, 3305, 3306, 3307, 3506, 3707 or 3808 by reason of being put up in measured doses or for retail sale are to be classified in those headings and in no other heading of the tariff schedule. 3. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are: (a) Having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked; (b) Entered together; and (c) Identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another. Additional U.S. Notes 1. In determining the amount of duty applicable to a solution of a single compound in water subject to duty in this section at a specific rate, an allowance in weight or volume, as the case may be, shall be made for the water in excess of any water of crystallization which may be present in the undissolved compound.
    [Show full text]
  • Step-By-Step Guide to Better Laboratory Management Practices
    Step-by-Step Guide to Better Laboratory Management Practices Prepared by The Washington State Department of Ecology Hazardous Waste and Toxics Reduction Program Publication No. 97- 431 Revised January 2003 Printed on recycled paper For additional copies of this document, contact: Department of Ecology Publications Distribution Center PO Box 47600 Olympia, WA 98504-7600 (360) 407-7472 or 1 (800) 633-7585 or contact your regional office: Department of Ecology’s Regional Offices (425) 649-7000 (509) 575-2490 (509) 329-3400 (360) 407-6300 The Department of Ecology is an equal opportunity agency and does not discriminate on the basis of race, creed, color, disability, age, religion, national origin, sex, marital status, disabled veteran’s status, Vietnam Era veteran’s status or sexual orientation. If you have special accommodation needs, or require this document in an alternate format, contact the Hazardous Waste and Toxics Reduction Program at (360)407-6700 (voice) or 711 or (800) 833-6388 (TTY). Table of Contents Introduction ....................................................................................................................................iii Section 1 Laboratory Hazardous Waste Management ...........................................................1 Designating Dangerous Waste................................................................................................1 Counting Wastes .......................................................................................................................8 Treatment by Generator...........................................................................................................12
    [Show full text]