List of chemical resistance of materials in contact with liquid ANALYSETTE 22 NeXT & ANALYSETTE 28 ImageSizer LASER PARTICLE SIZER & PARTICLE SIZER This chart information is based on FRITSCH's knowledge and experience and are intended as a guide and not as a guarantee. We cannot assure the perfect performance of the materials as that depends on many factors as working pressure, pressure picks, fluid, ambient temperature, fluid temperature, concentra‐ tion, duration of exposure, etc… Fritsch GmbH Milling and Sizing Industriestrasse 8 D - 55743 Idar-Oberstein Telephone: +49 (0) 6784/ 70-0 Email: [email protected] Internet: www.fritsch.de Version 04/2020 Index 001 Table of contents Table of contents 1 Materials in contact with liquid.................................................... 4 2 Abbreviations................................................................................. 5 3 List of chemical resistance............................................................. 7 3.1 KEY......................................................................................... 7 3.2 Note....................................................................................... 7 3.3 Table 1.................................................................................... 7 3.4 Table 2.................................................................................. 97 3.5 Table 3................................................................................ 105 - 3 - Materials in contact with liquid 1 Materials in contact with liquid Wet dispersion units Materials used in the sample circuit: stainless steel¹, PTFE (Teflon)²,N-BK7 glass, Viton®², Wet dispersion unit (22.9200.00 & 28.2500.00) Viton® Extreme³, POMª, Brass, Silicone hoses (LEZ-SIL 60 PFT)º FFKM (Kalrez®)³: replaces Viton®² & Viton® Extreme³; TPE "Conversion Kit Extended" for extreme chemical resist- (LEZ-SAN Santoprene®)³: replaces Silicone hoses (LEZ-SIL ance (22.9287.00 & 22.9288.00) 60 PFT) ¹ See Table 1 and Table 2 ² See Table 2 ³ See Table 1 º See Table 2 (Silicone (peroxide/ platinum- cured)) ª See Table 3 - 4 - Abbreviations 2 Abbreviations ASTM D1418 Abbreviation Chemical name Trade names PPE Prefix Europrene-AR®, Krynac®, ACM Polyacrylate (Polyacrylic) Nipolar®, Hycar®, Cyan- P acryl®, Noxtite-PA® AEM Ethylene Acrylic Vamac® W W Vibrathane®, Pellethane®, Polyester Urethane Poly- Urepan®, Elastothane®, AQU / EU Q ether Urethane Adiprene®, Desmopan®, Vulkollan®, Estane® Neoprene®, Skyprene®, CR Chloroprene Butclor®, Baypren®, C Denka® Chlorosulphonylpolyethy- CSM lene (Chlorosulphonated Hypalon®, Noralon® L polyethylene) Hydrin®, Herclor®, ECO Epichlorohydrin H Gechron® Ethylene-Propylene Buna-AP®, Dutral®, Epsyn®, EPD / EPDM Copolymer, Ethylene-Pro- Nordel®, Epcar®, Keltan®, E pylene Terpolymer Royalene®, Polysar-EDM® Fluoroethylene Propylene, Teflon FEP®, Neoflon FEP®, FEP / PFA D Perfluoroalkoxy Teflon PFA®, Neoflon PFA® Aflas®, Dyneon BRE®; Viton FEPM See TFE/P A Extreme® FFKM/FFPM* Perfluoroelastomer Perlast®, Kalrez®, Chemraz® G Viton®, Dai-el®, Fluorel®, FKM/FPM* Fluoroelastomer V Tecnoflon® FVMQ Fluorosilicone Silastic, LS®, FSE® F Breon, Butakon®, Chem- igum®, Hycar®, Buna-N®, Nitrile Butadine, Carboxy- NBR / XNBR Butacril®, Paracil®, Per- N lated Nitrile bunan®, Krynac®, Euro- prene-N®, Nipol® HNBR Hydrogenated Nitrile Therban®, Tornac®, Zetpol® Z Exxon Butyl®, Polysar IIR Butyl Rubber J Butyl®, Esso Butyl® IR Isoprene Shell Isoprene Rubber® R NR Natural Rubber Natsyn® R POM Polyoxymethylene - 5 - Abbreviations ASTM D1418 Abbreviation Chemical name Trade names PPE Prefix Cariflex S®, Plioflex®, Euro- SBR Styrene Butadine (Buna-S) prene®, Pliolite®, Buna B Huls®, Carom®, Solprene® Tetrafluoroethylene/Propy- TFE/P Aflas®, Flourel ll®, Fluoraz® A lene Thermoplastisches Elas- TPE LEZ-SAN Santoprene® tomer Silastic®, Siloprene®, Rho- VMQ / PVMQ Silicone S dorsil®, Silplus® - 6 - List of chemical resistance 3 List of chemical resistance 3.1 KEY A - No effect; little noticeable change B - Minor effect; slight corrosion or discoloration C - Moderate effect; not recommended for continuous use;softening, loss of strength, swelling and/or shrinkage D - Severe effect; not recommended for use; severe softening, swelling and/or shrinkage 3.2 Note The CHEMICAL PROPERTIES of N-BK7 glass see: https:// www.schott.com/d/advanced_optics/c36214d9-13c4-468c- bf40-8d438b89f532/1.30/schott-optical-glass-pocket-catalog-jan-2020- row.pdf 3.3 Table 1 FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Abietic Acid A A Acetaldehyde D A A D A Acetamide C C A A A Acetanilide C A Acetic Acid, 30% A A A A Acetic Acid, 5% A A A A A Acetic Acid, Gla- B A A A A cial Acetic Acid, Hot, D B A A High Pressure Acetic Anhydride D C A A A Acetoacetic Acid C C A A Acetone D B A A A Acetone Cyano- C B A A hydrin - 7 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Acetonitrile A B A A C Acetophenetidine A A Acetophenone D C A B Acetotoluidide A A Acetyl Acetone D A A A Acetyl Bromide A A D Acetyl Chloride A A A D A Acetylene A A A A A Acetylene Tetra- A A A bromide Acetylene Tetra- A A A D chloride Acetylsalicylic A A A Acid Acids, Non- A A organic Acids, Organic A A Aconitic Acid A Acridine A Acrolein C C A A Acrylic Acid A B A Acrylonitrile C C B D Adipic Acid A B B Aero Lubriplate A A A Aero Shell 17 A A A Grease Aero Shell 750 A A A Aero Shell 7A A A A Grease Aero Shell IAC A A A Aerosafe 2300 D C B Aerosafe 2300W D C B - 8 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aerozene 50 D C B (50% Hydrazine 50% UDMH) Air, Below 200ºF A A A Air, 200 - 300ºF A A D Air, 300 - 400ºF A A Air, 400 - 500ºF C B Aliphatic Dicar- A A D boxylic Acid Alkanes (Paraffin A A A Hydrocarbons) Alkanesulfonic A A Acid Alkazene B A A Alkenes (Olefin A A A Hydrocarbons) Alkyl Acetone C C A Alkyl Alcohol A A A Alkyl Amine A B B Alkyl Aryl Sulfo- A A nates Alkyl Aryl Sul- A A fonics Alkyl Benzene A A A Alkyl Chloride A A A Alkyl Sulfide* A A Alkylnaphthalene A A Sulfonic Acid Allyl Chloride A A C Allylidene Diace- C B tate Alpha Picoline C A Aluminum Ace- D C A A tate - 9 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aluminum Bro- A A A A mide Aluminum Chlo- C A A A rate Aluminum A A A A B Chloride Aluminum Eth- A A ylate Aluminum Fluo- A A A C ride Aluminum Fluo- A A rosilicate* Aluminum For- C C A A mate Aluminum B A A A B Hydroxide Aluminum Lino- A A A leate Aluminum A A A A A Nitrate Aluminum Oxa- C A late Aluminum Phos- A A A phate Aluminum Potas- C A A B sium Sulfate Aluminum Salts A A A A Aluminum C A A Sodium Sulfate Aluminum Sulfate A A A A B Alums-NH3 -Cr -K D A A Ambrex 33 A A A (Mobil) Ambrex 830 A A A (Mobil) Amines-Mixed D C A C A Aminoanthraqui- A none - 10 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Aminoazoben- A A zene Aminobenzene A Sulfonic Acid Aminobenzoic A Acid Aminopyridine A Aminosalicylic A Acid Ammonia (Anhy- D B A A drous) Ammonia and D Lithium Metal in Solution Ammonia, Gas, D A Cold Ammonia, Gas, D A Hot Ammonia, Liquid D A (Anhydrous) Ammonium Ace- C C A A tate Ammonium C A Arsenate Ammonium Ben- C A zoate Ammonium C C A Bicarbonate Ammonium Bisul- C A fite Ammonium Bro- A A mide Ammonium Car- C A bamate Ammonium Car- A A A A bonate Ammonium A A A A C Chloride, 2N - 11 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Cit- C A rate Ammonium C A Dichromate Ammonium C A A Diphosphate Ammonium Fluo- A A B ride Ammonium Fluo- A rosilicate* Ammonium For- C A mate Ammonium C A B A A Hydroxide, 3 Molar Ammonium D A B A A Hydroxide, Con- centrated Ammonium A A Iodide Ammonium Lac- C A tate Ammonium Met- C A aphosphate Ammonium C A Molybdenate* Ammonium A A A A Nitrate, 2N Ammonium A A A Nitrite Ammonium Oxa- C A A late Ammonium Per- C A chlorate Ammonium Per- A chloride Ammonium Per- A A A A sulfate 10% - 12 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Per- A A sulfate Solution Ammonium D A A Phosphate Ammonium A A A Phosphate, Dibasic Ammonium A A A Phosphate, Mono-Basic Ammonium A A A Phosphate, Tri- basic Ammonium C A Phosphite Ammonium Pic- C A rate Ammonium Poly- C A sulfide Ammonium Sali- C A cylate Ammonium Salts C B A A Ammonium Sul- C C A famate Ammonium Sul- D A A A B fate Ammonium Sul- D A fate Nitrate Ammonium Sul- D A A fide Ammonium Sul- C A A A fite Ammonium Thio- C A A cyanate Ammonium Thio- C A glycolate Ammonium Thio- C A A A A sulfate - 13 - List of chemical resistance FKM / FPM / Viton® Extreme TPE (LEZ-SAN Stainless Steel Fluid FFKM / Kalrez® Viton ETP-S Santoprene®) AISI 316L Ammonium Tung- C A state Ammonium Val- C A erate Amyl Acetate D B A D A Amyl Alcohol B A A A A Amyl Borate A A A Amyl Butyrate A A A Amyl Chloride A A A D B Amyl Chloro- A A A naphthalene Amyl Cinnamic A C A Aldehyde Amyl Laurate A A A Amyl Mercaptan A A A Amyl Naphtha- A A A lene Amyl Nitrate C A Amyl Phenol A A Amyl Propionate A A A Anderol, L- 826 A A A (di-ester) Anderol, L- 829 A A A (di-ester) Anderol, L-774 A A A (di-ester) ANG-25 (Di-ester A A Base) (TG749)