COM Express® Type 6 Reference Carrier Board in ATX Form Factor

Total Page：16

File Type：pdf, Size：1020Kb

COM Express® Type 6 Reference Carrier Board in ATX Form Factor

https://datarespons.solutions COM Express® Type 6 Reference Carrier Board in Express-BASE6 ATX Form Factor Features One PCI Express x4 slot, three PCI Express x1 slots PCI Express x16 / SDVO slot Supports three Digital Display Interfaces (DDI) with HDMI/DVI/DisplayPort output LPC based Super I/O Dual BIOS (SPI and LPC) Conforms to COM Express® Carrier Design Guide Specifications Functional Diagram Analog VGA USB0 Form Factor Header DB25 USB 2.0/3.0 ® ® USB1 Core Module Interface PICMG COM Express Revision 2.0 Header 2x17 Dual Channel LVDS USB 2.0/3.0 USB2 USB 2.0/3.0 Supports Type 6 modules in Basic or Compact form factor Flat Panel Control signals Header DB9 Dimensions 305 mm x 244 mm (ATX) USB3 USB 2.0/3.0 Expansion Busses One PCI Express x4 slot, three PCI Express x1 slots Trans LAN RJ45 former USB4 One ExpressCard slot USB5 4x SATA0 One PCI Express x16 / SDVO slot SATA USB6 USB 2.0 SATA SATA1 USB7 BIOS / Debug SATA SATA2 PCIe lane 0 to 3 POST LEDs Onboard diagnostics for BIOS POST code data and address SATA SATA3 PCIe x4 PCIe lane 4 on LPC bus PCIe x1 Secondary BIOS Onboard socket for secondary SPI flash Audio 7.1 Audio Channel HDA PCIe lane 5 Codec PCIe x1 S/PDIF out ALC886 CD Active Components AB Audio Realtek ALC886 High Definition Audio Codec PS/2 KB/MS LPC Super I/O PCIe lane 7 Super I/O Winbond WF83627DHG on LPC bus COM1 Winbond W83627DHG-PT PCIe x1 Digital I/O I2C to GPIO bridge PCA9535 COM2 Express PCIe lane 6 Card LPC Connectors Header DDI 1 ® COM Express Two x 220-pin (Type 6) 4GPI – 4GPO Header VGA DB15 on Rear I/O panel for VGA display DDI 2 PCIe x16 SMBus LVDS Onboard 34-pin header Header DDI 3 Digital Display Interface Supports three DDI ports to HDMI/DVI/DIsplayPort output by Header GPIO adapter card (PCIe x16 slot with proprietary pinout) PCA9535 I2C Flat Panel Control Onboard 8-pin header Header Audio Mic/Line-in/Line-out on I/O panel EEPROM SATA Two SATA ports (SATA0/1), two eSATA ports (SATA2/3) PCIe x16 PEG x16 Feature / Control Signals ExpressCard One socket onboard Header LAN 10/100/1000BASE-T compatible RJ45 on I/O panel nd SPI USB 2.0 Four USB 2.0 on I/O panel, 2 SPI BIOS Four USB 2.0/3.0 on I/O panel Serial Port One DB-9 on I/O panel One onboard 10-pin header Ordering Information Smart Battery One 10-pin header for Smart Battery management Modules communications (connects to ADLINK BattMan board) LPC Debug Onboard 20-pin header Model Number Description/Configuration KB/Mouse Two 6-pin mini DIN (on rear I/O panel) Express-BASE6 COM Express® Type 6 Reference Carrier Board in ATX Feature Connectors SMBus, I2C, module control signals form factor Miscellaneous Reset, Power LED, HDD LED, Buzzer COM Express Carrier Design Guide Provides detailed information on designing your own custom carrier board for COM Express modules..

Copy Link

Recommended publications

In This Video We Are Going to See How a Personal Computer Hardware Is Organised the PC Was Designed with an Open Architecture
In this video we are going to see how a personal computer hardware is organised The PC was designed with an open architecture. This means that it uses standard modular components. We can add, replace, update or swap them easily and the computer will identify and handle the new devices automatically. The main component of a computer system is the motherboard or main board. It is a printed circuit board (PCB) that holds the main components of the computer and the electronics needed to communicate between them and to expand the system. We could say that it is the central nervous system of the computer. A motherboard provides the electrical connections by which the other components of the system communicate. Unlike a backplane, it also contains the central processing unit and hosts other subsystems and devices The form factor is the specification of a motherboard – the dimensions, power supply type, location of mounting holes, number of ports on the back panel, etc. In the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rack mount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. The most used form factor for IBM PC compatible motherboards is ATX (Advanced Technology Extended) and its derivatives. For small form factor mainboards mini ITX is the de facto standard. A power supply unit (PSU) converts mains AC to low- voltage regulated DC power for the internal components of a computer.
[Show full text]
PCI/104-Express and Pcie/104 Specification
PCI/104-Express™ & PCIe/104™ Specification Including Adoption on 104™, EPIC™ and EBX™ Form Factors Version 2.10 February 18, 2013 Please Note This specification is subject to change without notice. While every effort has been made to ensure the accuracy of the material contained within this document, the PC/104 Consortium shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this specification. If errors are found, please notify the PC/104 Consortium. The PC/104 logo, PC/104, PC/104-Plus, PCI-104, PCIe/104, PCI/104-Express, 104, EPIC and EBX are trademarks of the PC/104 Consortium. All other marks are the property of their respective companies. Copyright 2007 - 2013, PC/104 Consortium IMPORTANT INFORMATION AND DISCLAIMERS The PC/104 Consortium (“Consortium”) makes no warranties with regard to this PCI/104-Express and PCIe/104 Specifications (“Specifications”) and, in particular, neither warrant nor represent that these Specifications or any products made in conformance with them will work in the intended manner. Nor does the Consortium assume responsibility for any errors that the Specifications may contain or have any liabilities or obligations for damages including, but not limited to, special, incidental, indirect, punitive, or consequential damages whether arising from or in connection with the use of these Specifications in any way. This specification is subject to change without notice. While every effort has been made to ensure the accuracy of the material contained within this document, the publishers shall under no circumstances be liable for incidental or consequential damages or related expenses resulting from the use of this specification.
[Show full text]
Qseven MSC Q7-MB-RP3
Qseven MSC Q7-MB-RP3 Description Qseven™ 2.0 Evaluation Board The MSC Q7-MB-RP3 is the third generation reference platform provided to test and qualify Qseven™ Rev. 2.0 modules for compatibility with the SGET specification. The board is shipped with a complete set of design files. An extensive design guide for the Qseven™ module technology is also provided to allow the motherboard designer to easily implement a custom version of a Qseven™ carrier. The Qseven™ Rev. 2.0 reference platform MSC Q7-MB-RP3 offers a large variety of interfaces commonly used in industrial applications such as Gigabit LAN, USB 3.0/2.0, RS232 and CAN as well as HDMI, DP and LVDS 435 x 170 for display attachment. In addition PCI Express is supported with one x16 and three PCIe x1 slots. This platform for N.A. rapid prototyping helps to assess the fitness of a specific CPU Technology. It is a key instrument to shorten design N.A.N.A. cycles and to improve time to market of new Qseven™ based systems. Highlights . One PCI Express™ x16 slot and 3 x1 slots . Two graphic card slots for HDMI / DP / eDP / LVDS . Mini PCI Express™ & mSATA slot . SD Card socket and SIM Card slot . Two SATA onboard connectors . Winbond W83627DHG Super I/O . EXAR X28V384 Super I/O . 7x COM, HW monitor . CAN Transceiver . HD audio codec . USB 3.0, 4x USB 2.0 Host and USB 2.0 Client interfaces avnet.com/embedded Qseven Technical Data - MSC Q7-MB-RP3 Formfactor Wide-ATX Storage Interfaces 2x SATA USB USB 3.0, 4x USB 2.0 Host, USB 2.0 Client Serial Interfaces 2x COM from Winbond Super I/O 4x COM from EXAR Super I/O 1x COM from Qseven module Bus Interfaces PCI express x16, 3x PCIe x1 Display Interfaces HDMI, DP, eDP, LVDS on add-on cards Network Interface GbE Audio Interface HD Audio on 6 connectors + S/PDIF Power Requirement 12V on standard connectors Certificates UL avnet.com/embedded Qseven Order Reference - MSC Q7-MB-RP3 Order Description Reference Cat Number 1135005 The MSC Q7-MB-RP3 is a reference platform designed for evaluation and MSC Q7-MB-RP3 PV test of Qseven Rev.
[Show full text]
Picopsu-120-WI-25 12-25V, 120Watt ATX Power Supply
picoPSU-120-WI-25 12-25V, 120Watt ATX Power Supply Quick Installation Guide Version 1.0b P/N picoPSU-120-WI-25 ATX DC-DC Converter Series Introduction The picoPSU-120-WI-25 is a small yet powerful and fully compliant ATX power supply designed to power a wide variety of motherboard from a single 12-25V unregulated power source. The picoPSU-120-WI-25 is the only “plug-in” wide input range power supply solution for general purpose low power motherboards. Compatible with most VIA C3/C7 CPUs M/B and with Pentium-M / Core Duo boards, picoPSU-120-WI-25 provides cool, 100% silent power for your system. The PICOPSU-120-WI-25 has many advantages over a regular power supply: -Smallest ATX PSU to date -100% silent operation -Low heat dissipation with combined efficiency over 94% -Plugs directly into the motherboard’s power connector, no cable mess Quick installation Instructions The PICOPSU-120-WI-25 has been specifically designed for the Mini- ITX form factor, thus eliminating the need for ATX power cables. It is also 1U compliant – height will not exceed the 1U formfactor. 1) After the picoPSU module was ‘snapped in’, hook the hard drive power or floppy power to your floppy/hard drives. If more hard drives or floppy connectors are needed, use a HDD/floppy “Y” splitter cable. 2) picoPSU-120-WI-25 Quick Installation Guide Page 2 ATX DC-DC Converter Series 2) Connect a 12-25VDC power adapter (peak should not exceed 26.5V) to the input connector. 3) Turn on the PC using the motherboard ON/OFF switch Typical configuration The picoPSU-120-WI-25 has been tested with all mini-ITX board under virtually any disk/floppy/CDROM/PCI configuration.
[Show full text]
Features Pcie/104 Qseven
PCIE/104 QSEVEN CARRIER BOARD PART NUMBER: QCG001 Connect Tech’s PCIe/104 Qseven Carrier Board is a small embedded carrier board that allows complete integration with any industry standard Qseven module. This carrier board utilizes the PC/104 form factor with 4 x1 PCIe lanes, and the PCIe/104 bus. The on-board connectors enable connection to SATA, USB, Ethernet, LVDS Video, VGA Video, and RS-232 & RS-422/485. Easily upgrade to the latest processor and memory technology while maintaining the I/O interfaces. FEATURES ✓ PCIe/104 form factor ✓ Uses any off-the-shelf Qseven module ✓ Ideal for applications with low ✓ Connectors and cables included for power requirements easy connection to Qseven features Custom Design Services Note: Qseven CPU module mounted Can’t find the feature you need or require a different form factor? on bottom side. Qseven module sold separately. The PCIe/104 Qseven Carrier Board allows you to prototype your application, while Connect Tech’s design services creates a custom solution. SPECIFICATIONS Form Factor PCIe/104, 4 x1 PCIe lanes Display VGA, LVDS flat panel Storage 2x SATA Serial Interface 2x RS-232, 2x RS-485 USB 4x USB 2.0 Ethernet 1x Gigabit Ethernet Dimensions PC/104 compliant Temperature -20°C to 70°C (-4°F to 158°F) Power ATX supply input Additional I/O PS/2 keyboard and mouse Warranty and Accessories Optional Cable Kit 2 Year Warranty and free technical support Support Specifications subject to change without notice. ©2020 Connect Tech Inc. All trademarks are property of their respective holder. CTIX-00076(0.05) - 2021-07-20 Connect Tech Inc.
[Show full text]
Micro Fly Cases
Micro Fly Cases Micro Fly, Micro ATX Case In the past, trying to find a compact case that is still versatile and truly dynamic was a daunting task. But that's all changed now that there's the Ultra Micro Fly! The Micro Fly can utilize any micro ATX motherboard, and because the Micro Fly is 1.5" deeper than similar cases, it can accept standard depth ATX power supplies and standard depth optical drives. Despite Micro Fly's compact size, cooling is never a problem since the Micro Fly comes included with an 80MM fan in the front bringing cool air in, and a 120MM fan in the rear pulling hot air out. The Micro Fly also includes front USB, Firewire and Audio Outputs and is available with an optional, Ultra V-Series 400W power 120mm Fan Full Size ATX Power Supply Bay (Included) (Included In Some Models) supply with custom length cables. Black Includes 400W V-Series PSU Part #: ULT33114 Model #: MFBK400 UPC#: 022769331140 Motherboard 4 Expansion Slots Temperature Display MS-Blue Backplate Includes 400W V-Series PSU Specifications · Expansion Slots: Part #: ULT33115 · Colors: Black, MS Blue, Silver Model #: MFBL400 - 4 Standard Slots UPC#: 022769331157 · 5 Drive Bay: · Rear 120mm Fan 2 - External 5.25" · Front 80mm Fan 1 - External 3.5” · Dimensions: Black w/ Clear Side 2 - Internal 3.5” Includes 400W V-Series PSU - Width: 11.25" · Material: Aluminum Part #: ULT33116 Front Temperature Display, - Height: 9" Model #: MFCLRBK400 USB, Firewire, and Audio Inputs · Form Factor: Micro ATX - Depth: 15” UPC#: 022769331164 Black w/ Clear Side 400 Watt V-Series
[Show full text]
ATX Specification
ATX Specification Version 2.01 ATX Specification - Version 2.01 New features and additional requirements of Version 2.01 of the ATX specification Please Note Version 2.01 of the ATX Specification incorporates clarifications and some minor changes, as noted below. These changes take into account support for the next generation of ATX motherboards, while maintaining compatibility with the first generation. Readers should examine their combination of motherboard, power supply, and chassis needs to determine whether they require the additional features found in Version 2.01 of the ATX Specification. Changes from Version 2.0 to Version 2.01 of the ATX Specification • Section 2 - Updated Figure 1 to reflect recommendations implemented with Version 2.0. • Section 3.2 - Modified Figure 2 to clarify motherboard mount requirements. • Section 3.3 - Updated table of requirements to reflect changes in the section outlined below. • Section 3.3.5 - Rewrote text to clarify requirements. • Section 3.3.5 - Reduced keepout zone requirement to 0.1” (2.5 mm). This change was based on feedback from chassis manufacturers and is the most significant requirement change with respect to the chassis. • Section 3.3.5 - Added recommendation to avoid paint within the keepout zone. • Section 3.3.5 - Replaced Figure 4 to clarify chassis I/O aperture requirements. Tolerances were added to dimensions. • Section 3.3.5 - Changed Figure 5 to define connector placement limitations on the motherboard. This is a new recommendation for motherboard designers to ensure clearance between the chassis and motherboard connectors for the I/O shield. • Section 3.3.5 - Modified Figure 6 to remove redundant dimensions, and removed Figure 7 completely.
[Show full text]
CHAPTER 4 Motherboards and Buses 05 0789729741 Ch04 7/15/03 4:03 PM Page 196
05 0789729741 ch04 7/15/03 4:03 PM Page 195 CHAPTER 4 Motherboards and Buses 05 0789729741 ch04 7/15/03 4:03 PM Page 196 196 Chapter 4 Motherboards and Buses Motherboard Form Factors Without a doubt, the most important component in a PC system is the main board or motherboard. Some companies refer to the motherboard as a system board or planar. The terms motherboard, main board, system board, and planar are interchangeable, although I prefer the motherboard designation. This chapter examines the various types of motherboards available and those components typically contained on the motherboard and motherboard interface connectors. Several common form factors are used for PC motherboards. The form factor refers to the physical dimensions (size and shape) as well as certain connector, screw hole, and other positions that dictate into which type of case the board will fit. Some are true standards (meaning that all boards with that form factor are interchangeable), whereas others are not standardized enough to allow for inter- changeability. Unfortunately, these nonstandard form factors preclude any easy upgrade or inexpen- sive replacement, which generally means they should be avoided. The more commonly known PC motherboard form factors include the following: Obsolete Form Factors Modern Form Factors All Others ■ Baby-AT ■ ATX ■ Fully proprietary designs ■ Full-size AT ■ micro-ATX (certain Compaq, Packard Bell, Hewlett-Packard, ■ ■ LPX (semiproprietary) Flex-ATX notebook/portable sys- ■ WTX (no longer in production) ■ Mini-ITX (flex-ATX tems, and so on) ■ ITX (flex-ATX variation, never variation) produced) ■ NLX Motherboards have evolved over the years from the original Baby-AT form factor boards used in the original IBM PC and XT to the current ATX and NLX boards used in most full-size desktop and tower systems.
[Show full text]
Download the PDF Handout
For the free video please see http://itfreetraining.com/ap/1b25 In this video from ITFreeTraining, I will look at the different form factors that are available for computers. The form factors determine the design constraints for the motherboard, case and power supply. All three need to conform to the form factor design specification to ensure that they will work together. Copyright 2020 © http://ITFreeTraining.com Form Factors • Defines dimensions and layouts Motherboard sizes PSU and connectors IO/Panel Computer cases 0:18 To start with, I will look at what a form factor is. A form factor defines the dimensions and layouts that can be used for the motherboard, power supply and the computer case. You will find that motherboards designed to meet a form factor specification will be the same size or very close. On closer inspection, you will find the drill holes are in the same place. This ensures that when you buy a motherboard of a particular form factor it will always fit inside a computer case that supports that form factor. The motherboard is attached to the computer case by standoffs. Standoffs are brass or plastic that attach to the computer case and provide somewhere for the screws to screw into. The form factor also defines the power supply unit and the connectors that are used on the power supply. This is why you will find that different power supplies are the same shape and have the same connectors on them. The form factor also defines the size of the area that will be used by the input and output connectors otherwise known as IO connectors.
[Show full text]
COM Express Quick Start Guide Embedded Computing Modules: P ROCELERANT™ CE370, CE373, CE738, and CE760 CR100 Flex ATX Carrier Board
COM Express Quick Start Guide Embedded Computing Modules: P ROCELERANT™ CE370, CE373, CE738, and CE760 CR100 Flex ATX Carrier Board Pre-installation Instructions 1 Installation Instructions 2 Operating System and Driver Setup 3 www.radisys.com 007-01546-0001 • December 2005 © 2005 by RadiSys Corporation. All rights reserved. RadiSys is a registered trademark and Procelerant is a trademark of RadiSys Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel, Pentium, and Celeron are registered trademarks of Intel Corporation. Red Hat and Red Hat Linux are registered trademarks of Red Hat, Inc. Linux is a registered trademark of Linus Torvalds. Thermstrate and Power Devices Inc. are registered trademarks of Power Devices Inc. All other trademarks, registered trademarks, service marks, and trade names are the property of their respective owners. Contents Preface About this guide ................................................................................................................................................................................. 5 Safety Notices...................................................................................................................................................................................... 5 Where to get more information...................................................................................................................................................... 6 Chapter 1: Pre-installation Instructions Handling precautions .......................................................................................................................................................................
[Show full text]
Lion PC/104 Format Single Board Computer
Product Data Sheet Lion PC/104 Format Single Board Computer Overview Highlights The Lion is a high-performance single board computer (SBC) which 7th Generation Intel® Core™ DisplayPort video outputs combines Intel’s 7th generation Core “Kaby Lake” processor, with processor (“Kaby Lake”) Mini PCIe Socket, with mSATA a newer PCIe/104 OneBank expansion interface. Compatible with the PCI/104-Express format, it includes a legacy PCI connector, Dual-core support and a high-speed PCIe connector. This provides flexible system PCI/104 OneBank™ form USB 3.0 and 2.0 ports expansion, while leaving more on-board space available for product factor Serial I/O (RS-232/422/485) features. The single bank connector is mechanically and electrically TPM (Trusted Platform Digital I/O compatible with PCI/104-Express Type 1 and Type 2 modules. Module) security chip Shock & vibration per In addition, the Lion also contains a full complement of on-board I/O interfaces, including USB 3.0, USB 2.0, mini PCIe expansion Intel Active Management MIL-STD-202G socket, TPM chip, multiple serial interfaces, and 8-bits of digital I/O. Technology VersaAPI software support The Lion is available with an embedded i7-7600U, i5-7300U, or -40° to +85°C Operating x86 operating systems i3-7100U Kaby Lake processor, providing standard clock rates Temperature (Windows, Linux, etc.) up to 2.8 GHz and Turbo Boost rates to 3.9 GHz. The Kaby Lake Up to 16 GB RAM processors feature dual-core CPUs and Hyper-Threading logic Dual Gigabit Ethernet allowing up to 4 simultaneous threads to be executed.
[Show full text]
X-Blaster ATX Cases
X-Blaster ATX Cases Qulity, Style, and Performance When looking for subtle styling, durable quality and unparalleled ease of use, look no further than the Ultra X-Blaster. The X-Blaster supports AT, baby AT, ATX and micro ATX motherboards and features 1mm thick high grade steel. The X-Blaster has 10 drive bays. Four tool-free 5.25" drive bays, one external 3.5" bay and five internal 3.5" bays. PCI and AGP cards can be installed and secured to their slots without tools. Components can be kept cool by installing a pair of 120MM fans to the front and rear fan mounts. X-Blaster even includes an Intel TAC compliant CPU duct and VGA vent. Specifications · Fan Ports: · Colors Available: 2 - 120mm Black, Black w/ Clear Side, Beige · Dimensions: · 10 Drive Bay: - Width: 7.5” 4 - External 5.25" - Height: 17" 1 - External 3.5” - Depth: 19.5” 5 - Internal 3.5” · LEDs: · Material: Steel - Green - Power · Form Factor: - Orange - Hard Drive Access - AT · Switches: - Baby AT 120mm Fan - Power - ATX PSU Bay Intake/Exhaust System - Reset - Micro ATX · Front Access USB, Firewire · Expansion Slots: 7 Standard Slots and Audio X-Blaster ATX Mid-Tower Case - Black Black Solid Side Part #: ULT33178 Tool-less PCI Slots UPC#: 022769331782 Weight: 18 lbs. Dimensions: 19.5x7.5x17” X-Blaster ATX Mid-Tower Case - Black w/ Clear Side Black with Clear Side Part #: ULT33179 UPC#: 022769331799 Weight: 18 lbs. Dimensions: 19.5x7.5x17” X-Blaster ATX Mid-Tower Case - Black Black Solid Side with 350 Watt V-Series PSU Part #: ULT33175 Front Access UPC#: 022769331751 USB, Firewire, & Audio Weight: 22 lbs.
[Show full text]