https://datarespons.solutions COM Express® Type 6 Reference Carrier Board in Express-BASE6 ATX Form Factor Features One PCI Express x4 slot, three PCI Express x1 slots PCI Express x16 / SDVO slot Supports three Digital Display Interfaces (DDI) with HDMI/DVI/DisplayPort output LPC based Super I/O Dual BIOS (SPI and LPC) Conforms to COM Express® Carrier Design Guide Specifications Functional Diagram Analog VGA USB0 Form Factor Header DB25 USB 2.0/3.0 ® ® USB1 Core Module Interface PICMG COM Express Revision 2.0 Header 2x17 Dual Channel LVDS USB 2.0/3.0 USB2 USB 2.0/3.0 Supports Type 6 modules in Basic or Compact form factor Flat Panel Control signals Header DB9 Dimensions 305 mm x 244 mm (ATX) USB3 USB 2.0/3.0 Expansion Busses One PCI Express x4 slot, three PCI Express x1 slots Trans LAN RJ45 former USB4 One ExpressCard slot USB5 4x SATA0 One PCI Express x16 / SDVO slot SATA USB6 USB 2.0 SATA SATA1 USB7 BIOS / Debug SATA SATA2 PCIe lane 0 to 3 POST LEDs Onboard diagnostics for BIOS POST code data and address SATA SATA3 PCIe x4 PCIe lane 4 on LPC bus PCIe x1 Secondary BIOS Onboard socket for secondary SPI flash Audio 7.1 Audio Channel HDA PCIe lane 5 Codec PCIe x1 S/PDIF out ALC886 CD Active Components AB Audio Realtek ALC886 High Definition Audio Codec PS/2 KB/MS LPC Super I/O PCIe lane 7 Super I/O Winbond WF83627DHG on LPC bus COM1 Winbond W83627DHG-PT PCIe x1 Digital I/O I2C to GPIO bridge PCA9535 COM2 Express PCIe lane 6 Card LPC Connectors Header DDI 1 ® COM Express Two x 220-pin (Type 6) 4GPI – 4GPO Header VGA DB15 on Rear I/O panel for VGA display DDI 2 PCIe x16 SMBus LVDS Onboard 34-pin header Header DDI 3 Digital Display Interface Supports three DDI ports to HDMI/DVI/DIsplayPort output by Header GPIO adapter card (PCIe x16 slot with proprietary pinout) PCA9535 I2C Flat Panel Control Onboard 8-pin header Header Audio Mic/Line-in/Line-out on I/O panel EEPROM SATA Two SATA ports (SATA0/1), two eSATA ports (SATA2/3) PCIe x16 PEG x16 Feature / Control Signals ExpressCard One socket onboard Header LAN 10/100/1000BASE-T compatible RJ45 on I/O panel nd SPI USB 2.0 Four USB 2.0 on I/O panel, 2 SPI BIOS Four USB 2.0/3.0 on I/O panel Serial Port One DB-9 on I/O panel One onboard 10-pin header Ordering Information Smart Battery One 10-pin header for Smart Battery management Modules communications (connects to ADLINK BattMan board) LPC Debug Onboard 20-pin header Model Number Description/Configuration KB/Mouse Two 6-pin mini DIN (on rear I/O panel) Express-BASE6 COM Express® Type 6 Reference Carrier Board in ATX Feature Connectors SMBus, I2C, module control signals form factor Miscellaneous Reset, Power LED, HDD LED, Buzzer COM Express Carrier Design Guide Provides detailed information on designing your own custom carrier board for COM Express modules..