Common Criteria for Information Technology Security Evaluation Part 2

Total Page:16

File Type:pdf, Size:1020Kb

Common Criteria for Information Technology Security Evaluation Part 2 Common Criteria for Information Technology Security Evaluation Part 2: Security functional components September 2007 Version 3.1 Revision 2 CCMB-2007-09-002 Foreword This version of the Common Criteria for Information Technology Security Evaluation (CC v3.1) is the first major revision since being published as CC v2.3 in 2005. CC v3.1 aims to: eliminate redundant evaluation activities; reduce/eliminate activities that contribute little to the final assurance of a product; clarify CC terminology to reduce misunderstanding; restructure and refocus the evaluation activities to those areas where security assurance is gained; and add new CC requirements if needed. CC version 3.1 consists of the following parts: Part 1: Introduction and general model Part 2: Security functional components Part 3: Security assurance components Trademarks: UNIX is a registered trademark of The Open Group in the United States and other countries Windows is a registered trademark of Microsoft Corporation in the United States and other countries Page 2 of 324 Version 3.1 September 2007 Legal Notice: The governmental organisations listed below contributed to the development of this version of the Common Criteria for Information Technology Security Evaluation. As the joint holders of the copyright in the Common Criteria for Information Technology Security Evaluation, version 3.1 Parts 1 through 3 (called “CC 3.1”), they hereby grant non- exclusive license to ISO/IEC to use CC 3.1 in the continued development/maintenance of the ISO/IEC 15408 international standard. However, these governmental organisations retain the right to use, copy, distribute, translate or modify CC 3.1 as they see fit. Australia/New Zealand: The Defence Signals Directorate and the Government Communications Security Bureau respectively; Canada: Communications Security Establishment; France: Direction Centrale de la Sécurité des Systèmes d'Information; Germany: Bundesamt für Sicherheit in der Informationstechnik; Japan: Information Technology Promotion Agency Netherlands: Netherlands National Communications Security Agency; Spain: Ministerio de Administraciones Públicas and Centro Criptológico Nacional; United Kingdom: Communications-Electronics Security Group; United States: The National Security Agency and the National Institute of Standards and Technology. September 2007 Version 3.1 Page 3 of 324 Table of contents Table of Contents 1 INTRODUCTION ............................................................................................. 13 2 SCOPE ........................................................................................................... 14 3 NORMATIVE REFERENCES ......................................................................... 15 4 TERMS AND DEFINITIONS, SYMBOLS AND ABBREVIATED TERMS ...... 16 5 OVERVIEW ..................................................................................................... 17 5.1 Organisation of CC Part 2 ..................................................................................................................... 17 6 FUNCTIONAL REQUIREMENTS PARADIGM ............................................... 18 7 SECURITY FUNCTIONAL COMPONENTS ................................................... 23 7.1 Overview ................................................................................................................................................. 23 7.1.1 Class structure ................................................................................................................................ 23 7.1.2 Family structure .............................................................................................................................. 24 7.1.3 Component structure....................................................................................................................... 25 7.2 Component catalogue ............................................................................................................................ 27 7.2.1 Component changes highlighting ................................................................................................... 28 8 CLASS FAU: SECURITY AUDIT ................................................................... 29 8.1 Security audit automatic response (FAU_ARP) .................................................................................. 30 8.2 Security audit data generation (FAU_GEN) ........................................................................................ 31 8.3 Security audit analysis (FAU_SAA) ..................................................................................................... 33 8.4 Security audit review (FAU_SAR) ........................................................................................................ 37 8.5 Security audit event selection (FAU_SEL) ........................................................................................... 39 8.6 Security audit event storage (FAU_STG) ............................................................................................ 40 9 CLASS FCO: COMMUNICATION .................................................................. 43 9.1 Non-repudiation of origin (FCO_NRO) ............................................................................................... 44 9.2 Non-repudiation of receipt (FCO_NRR) .............................................................................................. 46 10 CLASS FCS: CRYPTOGRAPHIC SUPPORT ............................................ 48 10.1 Cryptographic key management (FCS_CKM) ............................................................................... 49 10.2 Cryptographic operation (FCS_COP) ............................................................................................. 52 Page 4 of 324 Version 3.1 September 2007 Table of contents 11 CLASS FDP: USER DATA PROTECTION ................................................. 54 11.1 Access control policy (FDP_ACC) ................................................................................................... 56 11.2 Access control functions (FDP_ACF) .............................................................................................. 58 11.3 Data authentication (FDP_DAU) ..................................................................................................... 60 11.4 Export from the TOE (FDP_ETC) .................................................................................................. 62 11.5 Information flow control policy (FDP_IFC) ................................................................................... 64 11.6 Information flow control functions (FDP_IFF) .............................................................................. 66 11.7 Import from outside of the TOE (FDP_ITC) .................................................................................. 71 11.8 Internal TOE transfer (FDP_ITT) ................................................................................................... 73 11.9 Residual information protection (FDP_RIP) .................................................................................. 76 11.10 Rollback (FDP_ROL) ........................................................................................................................ 78 11.11 Stored data integrity (FDP_SDI) ...................................................................................................... 80 11.12 Inter-TSF user data confidentiality transfer protection (FDP_UCT) ........................................... 82 11.13 Inter-TSF user data integrity transfer protection (FDP_UIT) ...................................................... 83 12 CLASS FIA: IDENTIFICATION AND AUTHENTICATION ......................... 86 12.1 Authentication failures (FIA_AFL) ................................................................................................. 88 12.2 User attribute definition (FIA_ATD) ............................................................................................... 90 12.3 Specification of secrets (FIA_SOS) .................................................................................................. 91 12.4 User authentication (FIA_UAU) ...................................................................................................... 93 12.5 User identification (FIA_UID) .......................................................................................................... 98 12.6 User-subject binding (FIA_USB) ................................................................................................... 100 13 CLASS FMT: SECURITY MANAGEMENT ............................................... 102 13.1 Management of functions in TSF (FMT_MOF) ........................................................................... 104 13.2 Management of security attributes (FMT_MSA) ......................................................................... 105 13.3 Management of TSF data (FMT_MTD) ........................................................................................ 109 13.4 Revocation (FMT_REV) ................................................................................................................. 112 13.5 Security attribute expiration (FMT_SAE) .................................................................................... 113 13.6 Specification of Management Functions (FMT_SMF) ................................................................. 114 13.7 Security management roles (FMT_SMR) ....................................................................................
Recommended publications
  • Validators Report
    National Information Assurance Partnership ® TM Common Criteria Evaluation and Validation Scheme Validation Report IBM Global Security Kit (GSKit) 8.0.14 Report Number: CCEVS-VR-VID10394-2011 Dated: 2012-03-06 Version: 1.0 National Institute of Standards and Technology National Security Agency Information Technology Laboratory Information Assurance Directorate 100 Bureau Drive 9800 Savage Road STE 6740 Gaithersburg, MD 20899 Fort George G. Meade, MD 20755-6740 ACKNOWLEDGEMENTS Validation Team Jim Brosey Orion Security Fort Meade, Maryland Jandria S. Alexander Aerospace Fort Meade, Maryland Vicky Ashby The MITRE Corporation McLean, Virginia Evaluation Team Alejandro Masino, Trang Huynh, Courtney Cavness atsec Information Security Corporation Austin, Texas Table of Contents 1. EXECUTIVE SUMMARY ........................................................................................................................................ 4 2. IDENTIFICATION .................................................................................................................................................... 4 3. CLARIFICATION OF SCOPE ................................................................................................................................. 6 3.1. PHYSICAL SCOPE ................................................................................................................................................... 6 3.2. LOGICAL SCOPE ....................................................................................................................................................
    [Show full text]
  • Cen Workshop Agreement Cwa 14722-3
    CEN CWA 14722-3 WORKSHOP August 2004 AGREEMENT ICS 35.240.15 Supersedes CWA 14722-3:2004 English version Embedded financial transactional IC card reader (embedded FINREAD) - Part 3: Functional and Security Specifications This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties, the constitution of which is indicated in the foreword of this Workshop Agreement. The formal process followed by the Workshop in the development of this Workshop Agreement has been endorsed by the National Members of CEN but neither the National Members of CEN nor the CEN Management Centre can be held accountable for the technical content of this CEN Workshop Agreement or possible conflicts with standards or legislation. This CEN Workshop Agreement can in no way be held as being an official standard developed by CEN and its Members. This CEN Workshop Agreement is publicly available as a reference document from the CEN Members National Standard Bodies. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide
    [Show full text]
  • Part 3: Security Assurance Components
    Common Criteria for Information Technology Security Evaluation Part 3: Security assurance components September 2012 Version 3.1 Revision 4 CCMB-2012-09-003 Foreword This version of the Common Criteria for Information Technology Security Evaluation (CC v3.1) is the first major revision since being published as CC v2.3 in 2005. CC v3.1 aims to: eliminate redundant evaluation activities; reduce/eliminate activities that contribute little to the final assurance of a product; clarify CC terminology to reduce misunderstanding; restructure and refocus the evaluation activities to those areas where security assurance is gained; and add new CC requirements if needed. CC version 3.1 consists of the following parts: Part 1: Introduction and general model Part 2: Security functional components Part 3: Security assurance components Trademarks: UNIX is a registered trademark of The Open Group in the United States and other countries Windows is a registered trademark of Microsoft Corporation in the United States and other countries Page 2 of 233 Version 3.1 September 2012 Legal Notice: The governmental organisations listed below contributed to the development of this version of the Common Criteria for Information Technology Security Evaluation. As the joint holders of the copyright in the Common Criteria for Information Technology Security Evaluation, version 3.1 Parts 1 through 3 (called “CC 3.1”), they hereby grant non- exclusive license to ISO/IEC to use CC 3.1 in the continued development/maintenance of the ISO/IEC 15408 international standard. However, these governmental organisations retain the right to use, copy, distribute, translate or modify CC 3.1 as they see fit.
    [Show full text]
  • Ccdb-2009-03-001
    Supporting Document Mandatory Technical Document Application of Attack Potential to Smartcards March 2009 Version 2.7 Revision 1 CCDB-2009-03-001 Foreword This is a supporting document, intended to complement the Common Criteria version 3 and the associated Common Evaluation Methodology for Information Technology Security Evaluation. Supporting documents may be “Guidance Documents”, that highlight specific approaches and application of the standard to areas where no mutual recognition of its application is required, and as such, are not of normative nature, or “Mandatory Technical Documents”, whose application is mandatory for evaluations whose scope is covered by that of the supporting document. The usage of the latter class is not only mandatory, but certificates issued as a result of their application are recognized under the CCRA. Technical Editor: BSI Document History: V2.7 March 2009 (technical update of rating categories and update on usage of open samples based upon corresponding JIL document version 2.7) V2.5 December 2007 (explicit statements added that the points for identification and exploitation have to be added at the end to achieve the final attack potential value, references updated) V2.3 April 2007 (evaluation time guideline and rules regarding the use of open samples added and updated for use with both CC version 2 and 3) V2.1 April 2006 (classification as mandatory technical document, several updates to the tables) V1.1, July 2002 (draft indicator deleted, references updated, same content as V1.0) General purpose: The security properties of both hardware and software products can be certified in accordance with CC. To have a common understanding and to ensure that CC is used for hardware integrated circuits in a manner consistent with today’s state of the art hardware evaluations, the following chapters provide guidance on the individual aspects of the CC assurance work packages in addition to the Common Evaluation Methodology [CEM].
    [Show full text]
  • Microsoft Windows Common Criteria Evaluation Security Target
    Windows 10, Server 2012 R2 Security Target Microsoft Windows Common Criteria Evaluation Microsoft Windows 10 Microsoft Windows Server 2012 R2 Security Target Document Information Version Number 1 Updated On March 17, 2016 Microsoft © 2016 Page 1 of 97 Windows 10, Server 2012 R2 Security Target This is a preliminary document and may be changed substantially prior to final commercial release of the software described herein. The information contained in this document represents the current view of Microsoft Corporation on the issues discussed as of the date of publication. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information presented after the date of publication. This document is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO THE INFORMATION IN THIS DOCUMENT. Complying with all applicable copyright laws is the responsibility of the user. This work is licensed under the Creative Commons Attribution-NoDerivs- NonCommercial License (which allows redistribution of the work). To view a copy of this license, visit http://creativecommons.org/licenses/by-nd-nc/1.0/ or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. The example companies, organizations, products, people and events depicted herein are fictitious.
    [Show full text]
  • Validators Report
    National Information Assurance Partnership ® TM Common Criteria Evaluation and Validation Scheme Validation Report SGI Red Hat Enterprise Linux Version 5.1 Report Number: CCEVS-VR-VID10286-2008 Dated: 2008-04-21 Version: 1.0 National Institute of Standards and Technology National Security Agency Information Technology Laboratory Information Assurance Directorate 100 Bureau Drive 9800 Savage Road STE 6740 Gaithersburg, MD 20899 Fort George G. Meade, MD 20755-6740 ACKNOWLEDGEMENTS Validation Team The Aerospace Corporation Columbia, MD Noblis Falls Church, VA atsec Information Security Corporation Austin, TX Table of Contents 1. EXECUTIVE SUMMARY ........................................................................................................................................4 2. IDENTIFICATION ....................................................................................................................................................5 3. SECURITY POLICY .................................................................................................................................................6 3.1. I&A.......................................................................................................................................................................6 3.2. AUDITING ..............................................................................................................................................................6 3.3. DISCRETIONARY ACCESS CONTROL ......................................................................................................................7
    [Show full text]
  • Review on Common Criteria As a Secure Software Development Model
    International Journal of Computer Science & Information Technology (IJCSIT) Vol 4, No 2, April 2012 REVIEW ON COMMON CRITERIA AS A SECURE SOFTWARE DEVELOPMENT MODEL Mehmet Kara 1 1TUBITAK BILGEM UEKAE, Kocaeli, Turkey [email protected] ABSTRACT Standards, models, frameworks and guidelines have been developed for secure software development such as such as Common Criteria, SSE-CMM, Microsoft SDL, OpenSAMM. Current standards and models provide guidance for particular areas such as threat modelling, risk management, secure coding, security testing, verification, patch management, configuration management etc. But there is not a generally accepted model for a secure software development lifecycle. Common Criteria provides objective evaluation methodology to validate that a product satisfies a specified set of security requirements. In this paper Common Criteria secure software development approach is examined and compared with other well known standards and models. KEYWORDS Common Criteria, Secure Software Development, Vulnerability, Confidentiality, Integrity, Availability. 1. INTRODUCTION Software applications are increasingly ubiquitous, heterogeneous, mission-critical and vulnerable to security incidents, so that it is absolutely vital that information systems are properly ensured from the very beginning, due to the potential losses faced by organizations that put their trust in all these information systems and because it is cost-effective and also brings about more robust designs. Therefore, security is among the non-functional requirements which are more seriously taken into account nowadays [1]. Software development process has been continuing for a long time. Characteristic of the first software projects was missed schedules, blown budget, and flawed products. But when we looked to the past there wasn’t a magic solution, a single development, in either technology or management technique, promises magnitude improvement in productivity, in reliability, in simplicity [15].
    [Show full text]
  • 523 Lss 2020 Common Criteria Certification Report Ricoh
    UNCLASSIFIED COMMON CRITERIA CERTIFICATION REPORT RICOH Pro C5300S/C5310S, v.JE-1.00-H 21 December 2020 523 LSS 2020 UNCLASSIFIED TLP:WHITE FOREWORD This certification report is an UNCLASSIFIED publication, issued under the authority of the Chief, Communications Security Establishment (CSE). The Information Technology (IT) product identified in this certification report, and its associated certificate, has been evaluated at an approved evaluation facility established under the Canadian Centre for Cyber Security (CCCS). This certification report, and its associated certificate, applies only to the identified version and release of the product in its evaluated configuration. The evaluation has been conducted in accordance with the provisions of the Canadian CC Scheme, and the conclusions of the evaluation facility in the evaluation report are consistent with the evidence adduced. This report, and its associated certificate, are not an endorsement of the IT product by Canadian Centre for Cyber Security, or any other organization that recognizes or gives effect to this report, and its associated certificate, and no warranty for the IT product by the Canadian Centre for Cyber Security, or any other organization that recognizes or gives effect to this report, and its associated certificate, is either expressed or implied. If your department has identified a requirement for this certification report based on business needs and would like more detailed information, please contact: Contact Centre and Information Services [email protected] | 1-833-CYBER-88 (1-833-292-3788) 2 UNCLASSIFIED TLP:WHITE OVERVIEW The Canadian Common Criteria Scheme provides a third-party evaluation service for determining the trustworthiness of Information Technology (IT) security products.
    [Show full text]
  • Aspects for Evaluating Acquired Elements of Information Systems
    Aspects for Evaluating Acquired Elements of Information Systems Pál Michelberger1, Andor Spisák2 1 Institute of Organisation and Management, Keleti Károly Faculty of Economics, Budapest Tech, H-1081 Budapest, Népszínház utca 8 [email protected] 2 Institute for Systems of Information Technology, Dennis Gabor College H-1037 Budapest, Bécsi út 324, [email protected] Abstract: Since developing information systems – be it a whole system or only parts of it – has become uneconomical, the majority of enterprises favours acquiring such systems to developing them from own resources. Purchasing and implementing information systems, however, requires a methodology. One of the most crucial processes within the purchase is choosing the most appropriate system among those available on the market. This paper offers a system of aspects which helps senior managers of a company evaluate various systems or parts of them all serving the same purpose. The listed aspects provide a possible list of aspects to help evaluate information systems available objectively by applying a set of carefully set weighting factors to well defined characteristics. The listed aspects all account for valid standards and recommendations. 1 Introduction Producing and service provider businesses usually do not develop their informatics solutions unaided on their own. This is especially true for the integrated resource design and business management information systems, which can serve the basis for further informatics developments (e-business, business intelligence applications, workflow). In any case of purchase or implementation it is a serious task to evaluate and compare the offers from both technical and economic points of view. This is also true for the commercial commodity elements of information systems supported by services.
    [Show full text]
  • New York State Coastal Management Program and Final Environmental
    NEW YORK STATE COASTAL MANAGEMENT PROGRAM AND FINAL ENVIRONMENTAL IMPACT STATEMENT This document incorporates all of the approved routine program changes from 1982 to 2020. Prepared by: Office of Coastal Zone Management National Oceanic and Atmospheric Administration Department Of Commerce 3300 Whitehaven Street, N.W. Washington, D.C. 20235 and New York Department of State 99 Washington Avenue, Suite1010 Albany, New York 12231‐0001 The preparation of this publication was financed in part through the office of Coastal Zone Management, NOAA. DESIGNATION: Final Environmental Impact Statement TITLE: Proposed Federal Approval of the New York Coastal Program ABSTRACT: The State of New York has submitted its Coastal Program to the Office of Coastal Zone Management for approval. Approval would allow program administrative grants to be awarded to the State, and would require that Federal actions be consistent with the program. This document includes a copy of the program (Volume 1), which is a comprehensive management program for coastal land and water use activities. It consists of numerous policies on diverse management issues which are administered under existing State laws and is the culmination of several years of program development. New York’s coastal policies either: promote the beneficial use of coastal resources, prevent their impairment, or deal with major activities that substantially affect numerous resources. The program will improve decision-making processes used for determining the appropriateness of actions in the coastal area. Approval and implementation of the program will enhance governance of the State’s coastal land and water areas and uses according to the coastal policies and standards contained in the existing statutes, authorities and rules.
    [Show full text]
  • Common Criteria Guide for Oracle Linux 7.3
    Common Criteria Guide for Oracle Linux 7.3 Version 1.0 Oracle Corporation 500 Oracle Parkway Redwood Shores, CA 94065 USA Tel.: +1.650.506.7000 Copyright © 2018 by Oracle and atsec information security Common Criteria Guide for Oracle Linux 7.3 Trademarks Oracle Linux and the Oracle logo are trademarks or registered trademarks of Oracle Corporation in the United States, other countries, or both. atsec is a trademark of atsec information security GmbH. Linux is a registered trademark of Linus Torvalds. UNIX is a registered trademark of The Open Group in the United States and other countries. Intel, Xeon, and Pentium are trademarks of Intel Corporation in the United States, other countries, or both. Legal Notice This document is provided AS IS with no express or implied warranties. Use the information in this document at your own risk. This document may be reproduced or distributed in any form without prior permission provided the copyright notice is retained on all copies. Modified versions of this document may be freely distributed provided that they are clearly identified as such, and this copyright is included intact. Version 1.0 Classification: atsec public 3 of 49 Copyright © 2018 by Oracle and atsec Common Criteria Guide for Oracle Linux 7.3 Table of contents 1 Introduction......................................................................................................................................8 1.1 Purpose of this Document.......................................................................................................8
    [Show full text]
  • NIST SP 800-28 Version 2 Guidelines on Active Content and Mobile
    Special Publication 800-28 Version 2 (Draft) Guidelines on Active Content and Mobile Code Recommendations of the National Institute of Standards and Technology Wayne A. Jansen Theodore Winograd Karen Scarfone NIST Special Publication 800-28 Guidelines on Active Content and Mobile Version 2 Code (Draft) Recommendations of the National Institute of Standards and Technology Wayne A. Jansen Theodore Winograd Karen Scarfone C O M P U T E R S E C U R I T Y Computer Security Division Information Technology Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899-8930 March 2008 U.S. Department of Commerce Carlos M. Gutierrez, Secretary National Institute of Standards and Technology James M. Turner, Acting Director GUIDELINES ON ACTIVE CONTENT AND MOBILE CODE Reports on Computer Systems Technology The Information Technology Laboratory (ITL) at the National Institute of Standards and Technology (NIST) promotes the U.S. economy and public welfare by providing technical leadership for the nation’s measurement and standards infrastructure. ITL develops tests, test methods, reference data, proof of concept implementations, and technical analysis to advance the development and productive use of information technology. ITL’s responsibilities include the development of technical, physical, administrative, and management standards and guidelines for the cost-effective security and privacy of sensitive unclassified information in Federal computer systems. This Special Publication 800-series reports on ITL’s research, guidance, and outreach efforts in computer security and its collaborative activities with industry, government, and academic organizations. National Institute of Standards and Technology Special Publication 800-28 Version 2 Natl. Inst. Stand. Technol. Spec. Publ.
    [Show full text]