DOCSLIB.ORG

Makita's Metal Cutting Saw Blades Cut Steel with Minimum Burrs and Burns !

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Makita's Metal Cutting Saw Blades Cut Steel with Minimum Burrs and Burns ! Makita'sMakita's MetalMetal CuttingCutting SawSaw BladesBlades · High speed cutting · Cuts steel cleaner · Spark-Free cutting Makita's Metal Cutting Saw Blade VS. Abrasive Cut-Off Wheel Makita's Metal Cutting Abrasive Wheels make Saw Blades make virtually Cuts with Sparks. Spark-Free Cuts. Makita's Metal Cutting Saw Blades cut steel with minimum burrs and burns ! Pipe Rebar Tubing Angle C-Stud Makita's Metal Cutting Saw Blades Abrasive Cut-Off Wheels Metal Cutting Saw Blades Cutting Tips * Secure the workpiece to a stable platform When cutting a long workpiece, always use support to minimize the risk of blade pinching and kickback. It is important to support the workpiece properly to minimize the risk of injury and damage to the teeth of the saw blade. Proper support To avoid kickback, support should Do not support board or panel away be close to the cut. from the cut * Always use metal cutting saw blades appropriate for your job The use of inappropriate saw blades may cause a poor cutting performance and present a risk of personal injury. * Adjust the cutting depth to the thickness of the workpiece Less than a full tooth of the blade should be exposed below workpiece. * The base should be placed on the workpiece flat and firmly No plunge cutting. * Keep your cutting line straight and your speed constant Too slow cutting result in premature blade worn-out. Never twist nor force the tool while cutting. Always wear safety glasses, gloves, protective equipment and follow instructions provided with power tool. Caution ! Do not touch blade or workpiece immediately after cut. Cermet (Ceramic-Metal) Tipped Saw Blade Has longer blade life than TCT saw blade. The cermet tip reproduce sharp edges as it breaks, while TCT tip only wears dull. Service life Cutting Time Angle stud 100 Cermet Saw Blade (3.0sec) Cermet Saw Blade (50 x 50 t=6) 50mm 6.9 125mm Abrasive Cut-Off Wheel 125mm Abrasive Cut-Off Wheel 0.7 50mm 100 (43.7sec) t=6mm Cermet Saw Blade Cermet Saw Blade 100 Rebar 4.4 (1.6sec) 125mm Abrasive Cut-Off Wheel (ø20) 125mm Abrasive Cut-Off Wheel 6 20mm 100 (36.0sec) 100 80 60 40 20 0 0 20 4060 80 100 Numbers in chart above are relative value when the results of "Cermet Saw Blade" are indexed at 100. Numbers in chart above are relative value when the results of "125mm Abrasive Cut-Off Wheel" are indexed at 100. The service life and cutting time of saw blade can be different depending on the working conditions. Makita's Metal Cutting Saw Blades (Carbide-Tipped Saw Blade) for many Applications Excellent Good METALMETAL SHEETSHEET C-STUDC-STUD ANGLE-STUDA NGLE-STUD METALMETAL STUDSTUD REBARR EBAR PIPEPIPE CORRUGATEDCORRUGATED SHEETSHEET Fair Not Applicable Hole dia. 30mm : For Europe SQUARE PIPE CONDUIT PIPE STEEL PIPE 20mm : For Asia, Oceania, South America, Gulf 50x100 45x90 50x50 50x50 t=0.56 t=1.6 50x100 ø25 ø60 t=1.0 5/8" : For North America t=1.5 t=3.0 ø20 t=0~0.9 Size Hole dia. Part No. t=1.6 t=3.2 t=4 t=6 25Ga 16Ga t=3.2 t=1.2 t=3.8 ~2.0 185x36T 30mm B-03931 Cermet 20mm B-04628 Tip Type 5/8" A-93815 30mm B-03953 185x38T 20mm A-85438 5/8" A-93821 30mm B-03969 185x48T 20mm A-83967 5/8" A-93837 30mm B-03975 185x70T 20mm A-86446 5/8" A-93843 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan PRINTED IN JAPAN Z16068-2 2005-7.
Load more

Recommended publications
  • Cutting & Grinding Discs
    Cutting discs PFERD with the new color code system on the disc and package. Grinding discs PFERD Standard arbor hole 22.2 mm Cutting disc S SG (performance range) For cutting of sheet metal, sections and solid materials in steel. Also for cast Iron. Disc thickness 1,0 – 1,6 – 1,9 mm for fast and comfortable cutting with minimized burr formation. Disc thickness 2,4 mm for universal cutting applications. Disc thickness 2,9 – 3,0 – 3,2 mm for maximum tool life with high lateral stability. Shape EHT (type 41 = flat disc) Shape EH (type 42 = depressed center). Number Diameter Thickness Shape PFERDERGONOMICS® cutting discs <2.0mm 460110 115 1.0 EHT 460111 115 1.6 EHT 460112 115 2.4 EHT 460114 125 1.0 EHT 460115 125 1.6 EHT 460116 125 2.4 EHT 460118 150 3.0 EHT 460118B 180 1.6 EHT 460119 180 2.9 EHT 460120 180 3.2 EHT 460120B 230 1.9 EHT 460121 230 2.9 EHT 460122 230 3.2 EHT Number Diameter Thickness Shape 460112E 115 2.4 EH 460113 115 3.2 EH 460116E 125 2.4 EH 460117 125 3.2 EH 460118E 150 3.0 EH 460119E 180 2.9 EH 460120E 180 3.2 EH 460121E 230 2.9 EH 460122E 230 3.2 EH Cutting disc SG STEELOX (performance range) For cutting of sheet metal, sections and solid material in steel and stainless steel (INOX). Shape EHT (type 41 = flat disc) Shape EH (type 42 = depressed center). * = metal center ring PFERDERGONOMICS® cutting discs <2.0mm Number Diameter Thickness Shape 460140 115 1.0 EHT 460141 115 1.6 EHT 460141B 115 2.0 EHT 460142 115 2.4 EHT 460145B 125 1.0 EHT * 460146 125 1.6 EHT * 460146B 125 2.0 EHT 460147 125 2.4 EHT 460147D 150 1.6 EHT 460149A 180 1.6 EHT 460150 180 2.5 EHT * 460150B 230 1.9 EHT 460151 230 2.5 EHT 460152 230 3.2 EHT * Number Diameter Thickness Shape 460143 115 2.4 EH 460144 115 3.2 EH 460148 125 2.4 EH 460149 125 3.2 EH 460150E 180 2.5 EH 460151E 230 2.5 EH Pag.
    [Show full text]
  • Oil-Based Metalworking Fluids
    SSttrraaiigghhtt OOiillss ffoorr CCuuttttiinngg && GGrriinnddiinngg Optimum Performance Where Lubrication & Extreme Pressure Properties are Required E−LEARNING GUIDE CUTTING & GRINDING OILS REDUCE FRICTION ● LONGER TOOL LIFE IMPROVED SURFACE FINISH Oil based metalworking fluids, otherwise known as straight oils, are meant to be used in tough operations where lubrication and extreme pressure properties are necessary. They are not meant to replace or compete with their water-based counterparts; rather, they provide an option for those applications where lubrication is more essential than cooling. Straight oils provide significant improvements in cutting and grinding operations by reducing friction resulting in improved surface finishes and longer tool life, especially with grinding wheels and other abrasive tools. Premium cutting and grinding straight oils are specially designed to provide optimum performance across a variety of different operational levels and viscosities. They have distinct advantages such as: Long or continuous Exceptional rust Less fluid and Excellent lubricity service life of control sump maintenance fluids Oil based metalworking fluids can range from low to high viscosity and in performance from light to heavy duty machining, each feature dialed into the specific applications in which it will be used. Some examples of these oils are: Low viscosity light duty oils are designed to provide excellent wetting properties and are ideal in higher speed operations and Swiss machines. ISO 32 medium duty oils offer excellent performance in light to moderate duty cutting applications and are often used as dual or tri-purpose oils. These types of oils are ideal for screw machines or any operation where there is a high probability of leakage.
    [Show full text]
  • Introduction to Turning Tools and Their Application Identification and Application of Cutting Tools for Turning
    Introduction to Turning Tools and their Application Identification and application of cutting tools for turning The variety of cutting tools available for modern CNC turning centers makes it imperative for machine operators to be familiar with different tool geometries and how they are applied to common turning processes. This course curriculum contains 16-hours of material for instructors to get their students ready to identify different types of turning tools and their uses. ©2016 MachiningCloud, Inc. All rights reserved. Table of Contents Introduction .................................................................................................................................... 2 Audience ..................................................................................................................................... 2 Purpose ....................................................................................................................................... 2 Lesson Objectives ........................................................................................................................ 2 Anatomy of a turning tool............................................................................................................... 3 Standard Inserts .............................................................................................................................. 3 ANSI Insert Designations ............................................................................................................. 3 Insert Materials
    [Show full text]
  • Waterjet Cutting
    Waterjet Cutting Waterjet cutting is one of today’s fastest-growing technologies and is quickly becoming a leading fabrication process. Waterjet cutting uses a high-pressure stream of water with an abrasive such as garnet to make the cut. No heat is generated during Waterjet cutting, eliminating the risk of material distortion. Edge finish of Waterjet machined parts is smooth and satiny, with no jagged edges, slag or burrs, eliminating the need for other finishing processes such as grinding. Water jet cutting technology utilizes high pressure water with an abrasive substance to create a cutting tool that travels at three times the speed of sound. With this tool, virtually any material can be cut with or without an abrasive in some Hi-Tech Welding is a one-stop service center for welding and cases. The Mitsubishi control, combined with a CAD-CAM fabrication in Lee’s Summit, MO. generated CNC code, allows for simple or complex shapes to be cut. Speed and accuracy (compensation is within In 1985 Hi-Tech Welding originally began as a tool and die welding ±0.005” per 36” length) are easy to achieve with the Waterjet facility. Over the years it has grown into a full welding and fabrication Intelligent Taper ControlTM System. shop. Waterjet Cuts Virtually Any Material Services offered • Laser Welding Waterjet cutting is suitable for nearly any material, and can • Tool and Die Welding cut any material up to 6” thick. • Waterjet Cutting • Welding Repair We have software that allows us to make high quality ducts, • Repair and Refurbishment fittings, flanges and brackets.
    [Show full text]
  • Metal Drill Bits Hammer Drill Stronger Than Steel Chisel Drill Bits Stone and Special Metal Drill Bits
    BITS METAL DRILL BITS HAMMER DRILL STRONGER THAN STEEL CHISEL DRILL BITS STONE AND SPECIAL METAL DRILL BITS 307 | HSS-E DIN 338 cobalt 76–79 WOOD DRILL BITS 311 | HSS TIN DIN 338 steel drill bit 80–81 302 | HSS DIN 338, ground, split point 82–85 300 | HSS DIN 338, standard 86–90 300 | HSS DIN 338, standard, shank reduced 91 340 | HSS DIN 340, ground, split point, long 92 342 | HSS DIN 1869, ground, extra long 93 SAWS 344 | HSS hollow section drill bit / Facade drill bit 94 345 | HSS DIN 345 morse taper 95–96 303 | HSS DIN 1897 pilot drill bit, ground, split point, extra short 97 310 | HSS DIN 8037 carbide tipped 98 312 | HSS-G Speeder DIN 338 RN metal drill bit 99 304 | HSS Double end drill bit, ground, split point 100 315 | HSS Drill bit KEILBIT, ground 101 317 | HSS combination tool KEILBIT 102 329 | HSS countersink KEILBIT 103 327 | HSS countersink 90° DIN 335 C 104 328 | HSS deburring countersink 105 ASSORTMENTS 326 | HSS tube and sheet drill bit 106 325 | HSS step drill 107 140 | Scriber 108 320 | HSS hole saw bi-metal 109–112 SHELVES | From Pros for Pros | www.keil.eu | 73 MODULES - BITS HAMMER DRILL METAL DRILL BITS Nothing stops the metal drill bits because we offer a drill bit for every application. CHISEL HSS-E TWIST DRILL BIT 135° The HSS-E drill bit is a cobalt alloyed high performance drill bit. Even with insufficient cooling it has reserve in heat resistance. Due to the alloying addition of 5 % Co in the cutting material these drill bits can be used for working with work pieces with a tensile strength of over 800N/m².
    [Show full text]
  • Water Jet Cutting a Technology on the Rise
    Water Jet Cutting A Technology on the Rise Water Jet Cutting- A Technology on the Rise Foreword: Siberia to Iceland, from Norway to South The purpose of this brochure is to give the Africa. reader a rough overview of Waterjet Specially trained technicians are constantly Cutting. In addition to precise cutting of on duty and can help you immediately at various materials as presented, many any time. special applications i.e. medical and in the decommissioning and demolition field Service and wear parts are shipped within exist – these however being outside the 24 hours. scope of this text. For any additional Our contract-cutting department takes information, our KMT Waterjet team is care of our customers’ needs to the fullest, always available. Also, we would like to enabling us to perform test-cutting welcome you to visit our homepage procedures in order to optimize the www.kmt-waterjet.com, where you have cutting method, allowing you for the option of downloading useful files. economically and technically sound In order for you to get a better operation of your machines. understanding of KMT Waterjet Systems, The KMT Waterjet team in Bad Nauheim is we would also like to take this opportunity always available to answer your questions! to present our company. In the Autumn of 2003, KMT AB of Sweden purchased the Waterjet Cutting Division from Ingersoll-Rand. The KMT Corporation is an Internationally active corporation with over 700 employees worldwide. KMT Waterjet Systems employs 200 people. Further KMT brands include UVA, LIDKOPING, KMT Robotic Solutions, KMT Aqua-Dyne, KMT McCartney, and KMT H2O.
    [Show full text]
  • Severance Tool Countersinks
    Phone: 989-777-5500 Fax: 989-777-0602 E-Mail: [email protected] Severance Tool Industries Inc. • POB 1866 • Saginaw, MI 48605 A Countersink For Every Use Severance Tool Industries, Inc. manufactures countersinks with one, four and six flutes, carbide and high speed steel, countersinks with pilots and drill points, heavy-duty tools and specials. Sizes range from 1/8" to 3", and almost any centerline angle can be specified. These standard tools will handle at least 99% of all countersinking applications ... and we can build specials to satisfy any other need. Carbide or Steel? When machining hard or abrasive materials, carbide countersinks will often give 10 or more times the service life of high speed steel tools. As a rule of thumb, consider carbide for production operations with cast iron, alloy steel or glass-reinforced plastics. High speed steel is generally more economical in low carbon steel and nonferrous machining applications. In automated production operations, the cost of changing a tool can exceed the cost of the tool. Consider long-running carbide in such situations. 1, 4, or 6 Flutes? In general, a six-fluted countersink will remove more material per revolution than will a four-flute or single-flute tool. While the single-flute countersink is slow cutting, it will work well in a non-rigid machining setup. Four flutes provide more chip clearance than six do. This is a consideration in machining stringy materials such as some plastics and nonferrous alloys. Other factors being equal, the six-flute countersink will give more service life than the four-flute tool because the cutting load is distributed over more edges.
    [Show full text]
  • Single-Crystal Diamond Cutting Tool for Ultra-Precision Processing
    FEATURED TOPIC Single-Crystal Diamond Cutting Tool for Ultra-Precision Processing Kazushi OBATA ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Diamond cutting tools are used for various applications in nonferrous metal processing as they have superior sharpness and excellent wear resistance. Ultra-precision diamond cutting tools made of single-crystal diamond are used for processing resin molds for optical disk pickup lenses and smartphone camera lenses, as well as optical prism molds for liquid crystal panels. These tools are also used for the ultra-precision processing of laser reflecting mirrors in optical components. Meanwhile, a five- axe cutting machine that can operate in the 1-nm level was developed. To be employed for this machine, high-precision and small diamond cutting tools are required. This paper describes the characteristics of the ultra-precision diamond cutting tool (UPC) made of synthetic single crystal diamond named “SUMICRYSTAL.” It also introduces the applications of UPC in the ultra- precision processing of the optical components that Sumitomo Electric Hardmetal Corporation produces. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    [Show full text]
  • Wheels 1I8 Bleed
    E TREMECUT CUTTING & GRINDING WHEELS REFERENCE & APPLICATION GUIDE CUT-OFF WHEELS CUTTING AND GRINDING WHEELS GRINDING WHEELS Notes CUTTING & GRINDING WHEELS www.extremeabrasives.com C 2016 Extreme Abrasives. All Rights Reserved EXTREME ABRASIVES is proud to represent MABTOOLS in North America oR NOR TH AMERICA MABTOOLS, located in France, designs, develops and manufactures a complete range of cutting, deburring, and grinding solutions for industrial use. Previously known as MOLEMAB France, MABTOOLS, is the leading European manufacturer of Resin Bonded Wheels under its own brands as well as private labels. MABTOOLS has a long history dating back to 1961, when it was created by Gianfranco Maiolini under the MOLEMOB name. MABTOOLS invests heavily in R&D and technical staff to continue advancements in abrasive technology. The highest quality, safety, performance and value in industry are the main advantages of the MABTOOLS Cutting and Grinding Wheels. These wheels are the preferred choice of professional users. Cutting wheels are long-lasting and produce clean, precise, and burr-free cuts. Grinding wheels provide exceptionally high stock removal. Each wheel has fibreglass reinforcements that are selected for quality, strength, and maximum safety during use. All wheels are oSa approved, meet all of the EU and OSHA safety standards, and are made in France. Recommended Wheels by Material: RANGE MATERIALS r.Evolution Cutting Wheels Stainless Steels, Hard Steels, Alloyed Steels, Carbon Steels, Tool Steels, Sheet Metal Power Cutting Wheels All types of Steels, Sheet Metal, Cast Iron, Non-Ferrous Metals Energy Cutting and Grinding Wheels All Steels, Sheet Metal Cutting and Grinding Discs are designed for the machine types below: Electric operated Air operated Die grinders hand held angle grinders hand held angle grinders CUTTING & GRINDING WHEELS Hand held electric Portable chop saw Stationary chop saw or gas saws www.extremeabrasives.com C 2016 Extreme Abrasives.
    [Show full text]
  • Cutting Fluid Management: Small Machining Operations
    University of Northern Iowa UNI ScholarWorks Iowa Waste Reduction Center Book Gallery Iowa Waste Reduction Center 2003 Cutting Fluid Management: Small Machining Operations Iowa Waste Reduction Center Let us know how access to this document benefits ouy Copyright ©2003 Iowa Waste Reduction Center Follow this and additional works at: https://scholarworks.uni.edu/iwrc_facbook Part of the Environmental Sciences Commons Recommended Citation Iowa Waste Reduction Center, "Cutting Fluid Management: Small Machining Operations" (2003). Iowa Waste Reduction Center Book Gallery. 12. https://scholarworks.uni.edu/iwrc_facbook/12 This Book is brought to you for free and open access by the Iowa Waste Reduction Center at UNI ScholarWorks. It has been accepted for inclusion in Iowa Waste Reduction Center Book Gallery by an authorized administrator of UNI ScholarWorks. For more information, please contact [email protected]. Manual2003 12/17/03 7:54 AM Page 2 © Copyright 2003 IOWA WASTE REDUCTION CENTER University of Northern Iowa Creation of this manual was funded by the U.S. Environmental Protection Agency, Risk Reduction Engineering Lab under Cooperative Agreement CR 821492-01-2. (Edition 1) The revision of this manual was funded by the U.S. Environmental Protection Agency, Office of Pollution Prevention and Toxics under a grant administered to the Small Business Pollution Prevention Center, Award Number X-82849601-3 (Edition 3) Cutting Fluid Management for Small Machining Operations Manual2003 12/17/03 7:54 AM Page 3 TABLE OF CONTENTS 1.0 INTRODUCTION
    [Show full text]
  • Lecture)14:)Cutting)Tool)Technology
    MSE#440/540:#Processing#of#Metallic#Materials Instructors:)Yuntian)Zhu Office:)308)RBII Ph:)513D0559 [email protected] Lecture)14:)Cutting)Tool)Technology 1. Tool)material) 2. Tool)geometry Department)of)Materials)Science)and)Engineering 1 NC#State#University Three%Modes%of%Tool%Failure 1. Fracture%failure% – Cutting%force%becomes%excessive%and/or% dynamic,%leading%to%brittle%fracture 2. Temperature%failure% – Cutting%temperature%is%too%high%for%the%tool% material% 3. Gradual%wear% – Gradual%wearing%of%the%cutting%tool NC#State#University Preferred&Mode:&Gradual&Wear • Fracture&and&temperature&failures&are& premature&failures& • Gradual&wear&is&preferred&because&it& leads&to&the&longest&possible&use&of&the& tool& • Gradual&wear&occurs&at&two&locations&on& a&tool:& – Crater&wear&– occurs&on&top&rake&face – Flank&wear&– occurs&on&flank&(side&of&tool) NC#State#University Tool$Wear • Worn$cutting$tool,$ showing$the$ principal$locations$ and$types$of$wear$ that$occur NC#State#University Tool%Wear%vs.%Time • Tool%wear%(flank%wear)%as%a%function%of% cutting%time NC#State#University Effect'of'Cutting'Speed n Taylor'Tool'Life'Equation vT ='C where'v%='cutting'speed9'T ='tool'life9'and'n and'C are' parameters'that'depend'on'feed,'depth'of'cut,'work'material,' tooling'material,'and'the'tool'life'criterion'used • Natural'log?log'plot'of'cutting'speed'vs.'tool'life NC#State#University Tool$Materials • The$important$properties$for$tool$material: – Toughness$6 to$avoid$fracture$failure – Hot$hardness$6 ability$to$retain$hardness$at$high$ temperatures$ – Wear$resistance$6 hardness$is$the$most$ important$property$to$resist$abrasive$wear NC#State#University Hot)Hardness • Typical)hot)hardness) relationships)for) selected)tool)materials • High)speed)steel)is) much)better)than)plain) C)steel • Cemented)carbides)and) ceramics)are) significantly)harder)at) elevated)temperatures.
    [Show full text]
  • 7¼” Metal Cutting Circular Saw Operator's Manual
    MODEL S-7 XP (Part Number: SM-S-7 XP) 7¼” METAL CUTTING CIRCULAR SAW OPERATOR’S MANUAL TO REDUCE THE RISK OF INJURY, READ AND THOROUGHLY UNDERSTAND THIS OPERATOR’S MANUAL. Always Wear Eye and Never Place Line Voltage Ear Protection Hands Near Present Cutting Area WWW.STEELMAX.COM SM-S-7 XP Operator’s Manual 2017 Version 1.10 Steelmax S-7 XP Portable Metal Cutting Circular Saw Congratulations on your purchase of a Steelmax® portable metal cutting saw. Please register your product on our web site at www.steelmax.com/product-registration. Doing so will validate your machine’s warranty period and ensure prompt service if needed. We sincerely thank you for selecting a product from Steelmax. CONTENTS Intended Use and General Safety Guidelines .................................................................................1 Specific Safety Rules for Metal Cutting Saws .................................................................................4 Exploded Parts Diagram ..................................................................................................................8 Parts List ..........................................................................................................................................9 Steelmax S-7 XP Operation Assembly and Adjustment .................................................................................................10 Saw Blade Installation/Replacement ................................................................................. 11 Laser Guide Use and Adjustment ......................................................................................13
    [Show full text]