General Specifications

Total Page:16

File Type:pdf, Size:1020Kb

General Specifications <<Contents>> <<Index>> General Model BARD Specifications Safety Barriers GS 01B04S10-01E ■ GENERAL The BARD intrinsic safety (IS) barriers, connected to intrinsic safety devices installed in a hazardous area, configure an IS system in such a way that electric currents and voltages delivered from a safe area into a hazardous area can be limited to prevent energy A B BARD -700 generated in the IS circuit from igniting specified A B explosive gases. C BARD-820 3 2 1 12 • BARD is certified by Technology Institution of Industrial 34 Safety (TIIS), Japan. • Offered in two types: BARD-600, -700, -800, and -810 Zener barriers, and BARD-820 and -830 isolated barriers. • The BARD-600 is for use with a thermocouple and can • BARD-800 be used with double-element thermocouples. The BARD-700 is for use with a resistance temperature A CL 1 detector (RTD) and the BARD-800, -810, -820, and -830 are for use with a 4 to 20 mA signal. B 2 • The BARD-940 and -950 are power supply sets for BARD-820s and -830s. The BARD-940 consists of a C 3 single power feed unit and the BARD-950 consists of F01_6.EPS dual redundant power feed units that are mounted on a • BARD-810 DIN rail through which a power rail is running. They A 1 supply power to BARD-820s and -830s mounted on the same rail. B 2 ■ SCHEMATIC DIAGRAMS C 3 • BARD-600 F01_3.EPS • BARD-820 A 1 – Power Rail + 3 (L+) Power Supply 4 (L–) B 2 A (+) F01_1.EPS i • BARD-700 Input A 1 B (–) 1 (+) Output v 2 (–) B 2 F01_4.EPS • BARD-830 – Power Rail + 3 (L+) Power Supply C 3 4 (L–) F01_2.EPS A (+) 1 (+) Output Input B (–) 2 (–) F01_5.EPS GS 01B04S10-01E 1st Edition Apr. 2002 Yokogawa Electric Corporation <<Contents>> <<Index>> 2 ■ MODEL AND SUFFIX CODES ■ APPLICABLE CODES AND STANDARDS Model Suffix Codes Description BARD Safety barrier Japan TIIS Apparatus -6 For use with a thermocouple*1 Protection Explosion- -7 For use with an RTD*1 Model Concepts protected Type Use Use and -8 For use with a 4 to 20 mA signal*2 Construction Apparatus Grade -9 Power supply set*3 Group 00 Zener barrier BARD-600 [Ex ia] IIC For use with i3aG5 a thermocouple 10 Zener barrier for a CS multiplexer module BARD-700 [Ex ia] IIC i3aG5 For use with an RTD Isolated barrier for a transmitter with Zener 20 BARD-800 — i3aG5 Type communication functions 30 Isolated barrier for a control element BARD-810 [Ex ia] IIC — For use with a 4 to 40 With one power feed unit on a DIN rail 20 mA DC signal BARD-820 [Ex ia] IIC — Isolated With dual redundant power feed units 50 interface on a DIN rail BARD-830 [Ex ia] IIC — Style code *A Style A BARD-940 — — — Power supply set T01.EPS for BARD-820s *1: Available only with type code 00. BARD-950 — — — and BARD-830s. *2: Available with type code 00, 10, 20, or 30. T02.EPS *3: Available with type code 40 or 50. ■ SPELCIFICATIONS OF BARRIERS Item BARD-600 BARD-700 BARD-800 BARD-810 Type Zener barrier Zener barrier Zener barrier Zener barrier 4 to 20 mA DC 4 to 20 mA DC 4 to 20 mA DC Use Thermocouple RTD signal control signal monitoring signal i3aG5 (certified by TIIS, No. 55385) TIIS is the abbreviation of i3aG5 i3aG5 Construction Technology Institution (certified by TIIS, (certified by TIIS, — Grade of Industrial Safety Intrinsic No. 55386) No. 55577) safety class administered by and Ministry of Health, certificate Labor and Welfare, number Japan Protection Concepts [Ex ia] IIC [Ex ia] IIC [Ex ia] IIC and (certified by TIIS, (certified by TIIS, — (Certified by TIIS, No. C14981) Apparatus No. C15107) Japan, No. C15108) Group Vmax (Uo) 10 V 7.2 V 14.4 V 31.5 V 27.1 V Icc (Io) 100 mA 174 mA 77 mA 29.2 mA 93 mA Intrinsic Pmax (Po) 0.25 W 0.3132 W 0.2772 W 0.92 W 0.631 W safety Cext (Co) µ 0.37 µF 42 nF 0.089 µF ratings 1 F Lext (Lo) 2.2 mH 0.5 mH 4.2 mH 4.1 mH VM (Um) 250 V AC/DC 250 V AC/DC 250 V AC/DC 250 V AC/DC Leakage current 10 µA at 6.5 V 1 µA at 2.5 V 10 µA at 28 V 10 µA at 25.5 V Internal Per wire 216.5 ±5.6 Ω 130 ±3 Ω — resistance Difference ± Ω — — 60 m — (between wires) Max. ±30 ppm/°C 311 Ω (311 Ω + 36 Ω)Io + 0.9 V 139 Ω ϫ Io + 0.9 V Internal voltage drop — — 7.34 V at 23.6 mA 9.09 V at 23.6 mA 4.16 V at 23.6 mA 6.72 V at 21.6 mA 8.40 V at 21.6 mA Maximum impressed voltage 9V 6.5 V 31.0 V 26.6 V Rated current of internal fuse 50 mA 100 mA 50 mA 50 mA Working temperature range -10° to 50°C Storage temperature range -40° to 90°C Humidity range 5 to 95% RH (no condensation) Installation location Nonhazardous area (indoors) Grounding Grounding resistance of 10Ω or less (equivalent to Japanese Industrial Standard Class A) Material Polycarbonate Housing Color Light green Weight 160 g T03.EPS All Rights Reserved. Copyright © 2001, Yokogawa Electric Corporation GS 01B04S10-01E Apr. 01, 2002-00 <<Contents>> <<Index>> 3 Item BARD-820 BARD-830 Type Isolated barrier Isolated barrier Use 4 to 20 mA DC signal from transmitter with 4 to 20 mA DC signal to control element communication functions Intrinsic safety class Protection Concepts [Ex ia] IIC [Ex ia] IIC and certificate number and Apparatus Group (Certified by TIIS, No. C15059) (Certified by TIIS, No. C15060) Signal range 4 to 20 mA DC 4 to 20 mA DC Nonhazardous Overrange signal 0 to 24 mA DC 0 to 22 mA DC Load resistance 0 to 1 kΩ — Signal range 4 to 20 mA DC 4 to 20 mA DC Overrange 0 to 24 mA DC 0 to 22 mA DC Intrinsic safe signal 0 to 750 Ω (at 0 to 20 mA DC) Load resistance — 0 to 700 Ω (at 0 to 21.6 mA DC) Output signal ripples ±50 µA rms Output resistance — 6 MΩ or larger Input/output accuracy (at 23°C) 0.0625% of span (±10 µA) Effect of temperature variations 25 ppm/°C (±0.4 µA/°C) Response 10 µs (10 to 90%) 100 µs (10 to 90%) Max. 16.4 V DC at 20 mA Power supply voltage Min. 16.1 V DC at 24 mA Input voltage drop — 2 V or less at 20 mA Applicable communication type Yo kogawa BRAIN communication — Output breakage detection — Provided Working power supply voltage 20 to 35 V DC 94 mA at 20 V DC 67 mA at 20 V DC Maximum power consumption (at 20 mA DC 78 mA at 24 V DC 57 mA at 24 V DC output, 250 Ω load) 56 mA at 35 V DC 46 mA at 35 V DC Input-to-output 1,500 V AC for 1 minute 1,500 V AC for 1 minute Withstanding Input-to-power supply 1,500 V AC for 1 minute 40 V DC for 1 minute voltage Output-to-power supply 40 V DC for 1 minute 1,500 V AC for 1 minute Uo 25.2 V DC 25.2 V DC Io 93 mA 93 mA Intrinsic safety Po 0.58 W 0.58 W ratings Co 0.107 µF 0.107 µF Lo 4.2 mH 4.2 mH Um 250 V AC/DC 250 V AC/DC Working temperature range -10° to 50°C Storage temperature range -40° to 90°C Humidity range 5 to 95% RH (no condensation) Panel mounting (with the accompanying bracket), Mounting 35-mm DIN standard rail (DIN EN 50 022)-mounting, or dedicated DIN-equivalent power rail-mounting Connections M4 screw terminals (detachable terminal block) Applicable wires: AWG14 (2.5 mm2) Housing Material Polycarbonate Color Light green Weight 150 g T04.EPS All Rights Reserved. Copyright © 2001, Yokogawa Electric Corporation GS 01B04S10-01E Apr. 01, 2002-00 <<Contents>> <<Index>> 4 ■ EXAMPLES OF ALLOWABLE INTRINSICALLY SAFE CIRCUIT WIRING LENGTH The table on the right shows examples of the allowable BARD Model Combined IS Device Wiring Length wiring length when combining these safety barriers with a BARD-600 Model TC/ᮀ 2 km or less*1 Yokogawa’s IS field device. Ensure that the wiring length Model TD/ᮀ 800 m or less*1 meets the criterion and the wiring resistance does not BARD-700 Model RB/ᮀ 450 m or less*1 exceed the allowable external wiring resistance for the CVV (control PVC- receiver instrument connected. The table simply shows insulated PVC-sheathed 1 values that meet these two criteria. For the wiring cable): 400 m or less* resistance with which the combined devices can actually BARD-800 EJ Series transmitter CEV (control work, refer to the documentation of the model used. polyethylene-insulated PVC-sheathed cable): 800 m or less*1 CVV: 480 m or less*1 BARD-820 EJA Series transmitter CEV: 960 m or less*1 CVV: 340 m or less*1 BARD-830 PK200 CEV: 680 m or less*1 *1: The certified protection concepts and apparatus group require that a different temperature sensor, if combined, meets the following criteria: L: 20 µH or less; C: 2 nF or less.
Recommended publications
  • Download the “Freeview” Communication Software from Our Website
    GDS-800 Series Digital Storage Oscilloscope Operation Manual Table of Contents Pages 1. USAGE PRECAUTIONS AND RECOMMENDATIONS..............................2 2. GENERAL DESCRIPTION AND FEATURES.............................................7 3. FIRST TIME OPERATION ..........................................................................9 4. PANEL DESCRIPTION .............................................................................12 5. OPERATION .............................................................................................17 6. BLOCK DIAGRAM....................................................................................68 7. RS-232 CONFIGURATION .......................................................................69 8. SPECIFICATIONS.....................................................................................72 9. EC DECLARATION OF CONFORMITY....................................................82 Due to continuous improvements in the GDS-800 series Digital Storage Oscilloscope, information contained in this manual is subject to change without notice. Contact GW, for revisions and corrections. This document supports firmware version v1.0 for GDS-806S/C and GDS-810S/C; firmware version v2.03 for GDS-820S/C, GDS-840S/C and previous version 1 GDS-800 Series Digital Storage Oscilloscope Operation Manual 1. Usage Precautions and Recommendations The following precautions are recommended to insure your safety and to provide the best condition of this instrument. If this equipment is used in a manner not specified
    [Show full text]
  • Byzantium and Bulgaria, 775-831
    Byzantium and Bulgaria, 775–831 East Central and Eastern Europe in the Middle Ages, 450–1450 General Editor Florin Curta VOLUME 16 The titles published in this series are listed at brill.nl/ecee Byzantium and Bulgaria, 775–831 By Panos Sophoulis LEIDEN • BOSTON 2012 Cover illustration: Scylitzes Matritensis fol. 11r. With kind permission of the Bulgarian Historical Heritage Foundation, Plovdiv, Bulgaria. Brill has made all reasonable efforts to trace all rights holders to any copyrighted material used in this work. In cases where these efforts have not been successful the publisher welcomes communications from copyright holders, so that the appropriate acknowledgements can be made in future editions, and to settle other permission matters. This book is printed on acid-free paper. Library of Congress Cataloging-in-Publication Data Sophoulis, Pananos, 1974– Byzantium and Bulgaria, 775–831 / by Panos Sophoulis. p. cm. — (East Central and Eastern Europe in the Middle Ages, 450–1450, ISSN 1872-8103 ; v. 16.) Includes bibliographical references and index. ISBN 978-90-04-20695-3 (hardback : alk. paper) 1. Byzantine Empire—Relations—Bulgaria. 2. Bulgaria—Relations—Byzantine Empire. 3. Byzantine Empire—Foreign relations—527–1081. 4. Bulgaria—History—To 1393. I. Title. DF547.B9S67 2011 327.495049909’021—dc23 2011029157 ISSN 1872-8103 ISBN 978 90 04 20695 3 Copyright 2012 by Koninklijke Brill NV, Leiden, The Netherlands. Koninklijke Brill NV incorporates the imprints Brill, Global Oriental, Hotei Publishing, IDC Publishers, Martinus Nijhoff Publishers and VSP. All rights reserved. No part of this publication may be reproduced, translated, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission from the publisher.
    [Show full text]
  • Borna's Polity Attested by Frankish Sources in the Territory of the Former
    International Symposium The Treaty of Aachen, AD 812: The Origins and Impact on the Region between the Adriatic, Central, and Southeastern Europe Abstracts University of Zadar Zadar, September 27–29, 2012 Abstracts of the International Symposium The Treaty of Aachen, AD 812: The Origins and Impact on the Region between the Adriatic, Central, and Southeastern Europe Zadar, September 27–29, 2012 University of Zadar Department of History 2012 Frankish ducatus or Slavic Chiefdom? The Character of Borna’s Polity in Early-Ninth-Century Dalmatia Denis Alimov Borna’s polity, attested by Frankish sources on the territory of the former Roman province of Dalmatia in the first quarter of the 9th century, is traditionally considered to be the cradle of early medieval Croatian state. Meanwhile, the exact character of this polity and the way it was linked with the Croats as an early medieval gens remain obscure in many respects. I argue that Borna’s ducatus consisted of two political entities, the Croat polity proper, with its heartland in the region of Knin, and a small chiefdom of the Guduscani in the region of Gacka. Borna was the chief of the Croats, a group of people that gradually developed into an ethnic unit under the leadership of a Christianized military elite.. For all that, the process of the stabilization of the Croats’ group identity originally connected with the social structures of Pax Avarica and its transformation into what can be called gentile identity was very durable, the rate of the process being considerably slower than the formation of supralocal political organization in Dalmatia.
    [Show full text]
  • Precision Stainless Steel Gas Mass Flow Meters
    Precision Stainless Steel Gas Mass Flow Meters Features Direct monitoring of mass flow rate eliminates need for ancillary pressure and temperature sensing 316 Stainless-steel flow body accommodates most corrosive and toxic gas applications Suitable with pressures up to 500 psig ( 34 barg ) Digital display of mass flow rate optional on flow body or in remote Description version for panel mounting ierra Instruments' Top-Trak® Model 820S is Electronic output of mass flow S designed for precise measurement of any process rate for control or data-logging 820S Model gas in ranges from 0 to 10 sccm to 0 to 500 slpm. Because Large, straight sensor tube all wetted materials are 316 stainless steel, the device reduces pressure drop and pemits ® accommodates most clean gases, including corrosives at cleaning pressures upto 500 psig (34 barg). Platinum sensor minimizes zero drift Top-Trak's outstanding accuracy is a function of a and ensures long-term repeatability high-stability platinum flow sensor. This sensor has been Primary standard calibration continuously improved for many years to minimize long- ensures starting point accuracy term deviation (drift) . The sensor's large internal diameter and NIST traceability prevents the clogging and contamination often associated CE Approved with capillary type thermal mass flow meters and creates Compact size for easy installation minimum insertion pressure loss in your installation. The Model 820S optional dislpay shows the mass flow rate directly in any user defined gas mass units. The instru- ment display is tiltable over 180° for easy viewing and can be removed for remote panel mounting. A 0 to 5 VDC or 4 to 20 mA linear output signal proportional to gas mass flow rate is provided for recording, data-logging or control.
    [Show full text]
  • Northumbrian Numismatic Chronology in the Ninth Century
    NORTHUMBRIAN NUMISMATIC CHRONOLOGY IN THE NINTH CENTURY H. E. PAGAN THE subject of this paper is the coinage struck in Northumbria in. the ninth centuiy by the kings of Northumbria and by the archbishops of York.1 'The coins are nominally described as sceattas if their appearance is silvery and as stycas if they are predominantly copper. They will be familiar to most numismatists. What I propose to do is to review the coinage as a whole and offer a scheme for a major redating of most of the coins. It may be reassuring to know that the proposal though drastic is not altogether revolu- tionary. The circumstances are peculiar. In an article published in the British Numis- matic Journal thirteen years ago2 Mr. C. S. S. Lyon arranged the coins in their proper chronological order and estabhshed with reasonable accuracy the period of time for which each king and archbishop struck. It would be reasonable to suppose that this would make a substantial redating of the coinage impossible. In fact foe a variety of reasons it does not. Without rejecting any of Mr. Lyon's mam coacfarions it will fee possible to adopt a scheme of dating that looks very different from the scheme which has been accepted until now; and this is the course of actionforwhiAIshaiteaigBiBg. An initial difficulty of any discussion of the problems involved is that this is a mkagp that for one reason or another people do not take very seriously. Parity this is fceeamas the coins are not themselves attractive. Partly this is because the coins arc very eomramm, and familiarity breeds contempt.
    [Show full text]
  • PTP 820S Interfaces
    INSTALLATION GUIDE PTP 820S and PTP 820S Assured System Release 10.0 Accuracy While reasonable efforts have been made to assure the accuracy of this document, Cambium Networks assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. Cambium reserves the right to make changes to any products described herein to improve reliability, function, or design, and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Cambium does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Cambium products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Cambium intends to announce such Cambium products, programming, or services in your country. Copyrights This document, Cambium products, and 3rd Party software products described in this document may include or describe copyrighted Cambium and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Cambium, its licensors, and other 3rd Party supplied software certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material.
    [Show full text]
  • Early Pueblo Responses to Climate Variability: Farming Traditions, Land Tenure, and Social Power in the Eastern Mesa Verde Region
    EARLY PUEBLO RESPONSES TO CLIMATE VARIABILITY: FARMING TRADITIONS, LAND TENURE, AND SOCIAL POWER IN THE EASTERN MESA VERDE REGION Benjamin A. Bellorado and Kirk C. Anderson Abstract Maize agriculture is dependent on two primary environmental factors, precipi- tation and temperature. Throughout the Eastern Mesa Verde region, fluctuations of these factors dramatically influenced demographic shifts, land use patterns, and social and religious transformations of farming populations during several key points in prehistory. While many studies have looked at the influence climate played in the depopulation of the northern Southwest after A.D. 1000, the role that climate played in the late Basketmaker III through the Pueblo I period remains unclear. This article demonstrates how fluctuations in precipitation pat- terns interlaced with micro- and macro- regional temperature fluctuations may have pushed and pulled human settlement and subsistence patterns across the region. Specifically, we infer that preferences for certain types of farmlands dic- tated whether a community used alluvial fan verses dryland farming practices, with the variable success of each type determined by shifting climate patterns. We further investigate how dramatic responses to environmental stress, such as migration and massacres, may be the result of inherited social structures of land tenure and leadership, and that such responses persist in the Eastern Mesa Verde area throughout the Pueblo I period. Resumen La agricultura de maíz depende de dos factores ambientales primarios: precipitación y temperatura. A lo largo de la región oriental de Mesa Verde las fluctuaciones de estos fac- tores influyeron dramáticamente en cambios demográficos, patrones de uso de la tierra así como transformaciones sociales y religiosas en las poblaciones agrícolas durante varios momentos clave en la prehistoria.
    [Show full text]
  • 250/150/100/60Mhz DIGITAL STORAGE
    250/150/100/60MHz DIGITAL STORAGE OSCILLOSCOPE S GDS-800 Series DSO is designed for and built to meet the demands of a modern Digital Storage SPECIFICATIONS S E E P Oscilloscope in today's mainstream market. Featuring color or monochrome LCD displays, with 125k GDS-806S GDS-806C GDS-810S GDS-810C GDS-820S GDS-820C GDS-840S GDS-840C P O points of memory and 25GSa/s equivalent-time (ET) sampling rate per channel, the GDS-800 Series O C FREQUENCY Readout Resolution 6 digits C S provides a good balance of memory depth and sampling speed. With RS-232C, USB, No/NoGo and a COUNTER Frequency Range AC Coupled , 20Hz ~ bandwidth ; Resolution : 10Hz S O printer port as standard (excluding GDS-806/810) with options for a GPIB interface, the GDS-800 Series Signal Source All available trigger source except the Video Trigger mode O L ADJUSTABLE PROBE Frequency Range 1kHz ~ 100kHz , 1kHz/STEP 1kHz (Approx. 3% ) L L is remarkably adaptable. The easy-to-remember menu tree, the analog-scope like front panel design, L I COMPENSATION SIGNAL Duty Cycle Range 5% ~ 95%; 5%/STEP 50% I C the advanced trigger functions including Pulse Width, TV Line, Event and Time-Delay make the GDS- C S 800 Series general purpose DSO able to meet the rigors of most signal measurement requirements in EXTERNAL Range 15V S O TRIGGER Sensitivity O GDS-840C/820C/810C/806C the market. DC ~ 25MHz ~50mV DC ~ 25MHz ~50mV DC ~ 30MHz ~50mV DC ~ 30MHz ~50mV 25MHz ~ 60MHz ~100mV 25MHz ~ 100MHz ~100mV 30MHz ~ 150MHz ~100mV 30MHz ~ 150MHz ~100mV ( 250/150/100/60MHz) 150MHz ~ 250MHz ~150mV FEATURES
    [Show full text]
  • Innovations That Influence the Pharmacology of Monoclonal Antibody Guided Tumor Targeting1
    (CANCER RESEARCH (SUPPL.) 50, 820s-827s. Feburary 1, 1990] Innovations That Influence the Pharmacology of Monoclonal Antibody Guided Tumor Targeting1 Jeffrey Schlom,2 Patricia Horan Hand, John W. Greiner, David Colcher, Shashi Shrivastav, Jorge A. Carrasquillo, James C. Reynolds, Steven M. Larson,3 and Andrew Raubitschek Laboratory1of Tumor Immunology and Biology [J. S., P. H. H., J. W. G., D. C., S. S.J, Department of Nuclear Medicine, Clinical Center fJ. A. C., J. C. R., S. M. LJ, and Radiation Oncology Branch [A. R.], National Cancer Institute, and NIH, Bethesda, Maryland 20892 Abstract regulate the expression of specific tumor associated antigens such as carcinoembryonic antigen (CEA) or TAG-72 on the Tumor targeting by monoclonal antibodies (MAbs) can be enhanced surface of carcinoma cells and thus increase MAb tumor bind by (a) increasing the percentage of injected dose taken up by the tumor ing; (b) the intracavitary administration of MAbs. Recent stud and/or (b) increasing the tumor:nontumor ratios. Several groups have demonstrated that one can increase tumor to nontumor ratios by the use ies have demonstrated that when radiolabeled MAb B72.3 is of antibody fragments or the administration of second antibodies. Several administered i.p. to patients with carcinoma of the peritoneal other modalities are also possible: (a) the use of recombinant interferons cavity, it localizes tumor masses with greater efficiency than to up-regulate the expression of specific tumor associated antigens such does concurrent i.v. administered antibody. Studies involving as carcinoembryonic antigen or TAG-72 on the surface of carcinoma cells the comparative pharmacology of intracavitary administration and thus increase MAb tumor binding has proved successful in both in of radiolabeled MAb in patients and several animal models will vitro and in vivo studies; (b) the intracavitary administration of MAbs.
    [Show full text]
  • Phone: Assets Summary Sr020re-Sr023rec Home Ownership, Value of Home, Amount Owed, and Home Equity
    Wisconsin Longitudinal Study Codebook Phone: Assets Summary sr020re-sr023rec Home ownership, value of home, amount owed, and home equity. sr024re-sr027rec Other real estate ownership, value of, amount owed, and equity. sr028re-sr031rec Business or farm ownership, value of, amount owed, and equity. sr032re-sr035rec Motor vehicle ownership, value of, amount owed, and equity. sr036re-sr039re Debt not including mortgage, vehicle or previously reported real estate. sr040re-sr041re Value of savings and investments. sr042rec Bracketed value of debts. sr043rec-sr045rec Respondent net worth and valid/missing flags for values included in net worth. Imputed data for a subset of variables in this module are available in "Ancillary Data: Economic Imputations" sr020re: Do you own your own home or are you renting? Data source: Sibling Respondent Collected in: 1993-94 Mode: phone Source variables: 814m, b814m, RR020RE - 1 - Wisconsin Longitudinal Study Codebook Frequencies Value Label Male Female Total . System missing - NR 2113 1861 3974 -3 REFUSED, NOT ASCERTAINED 66 40 106 1 OWN HOME 2045 2168 4213 2 RENT HOME 188 233 421 3 LIVES WITH PARENT(S) 8 13 21 4 LIVES WITH CHILD(REN) 0 5 5 5 LIVES WITH OTHER RELATIVE(S) 4 3 7 6 LIVES WITH OTHER NON-RELATIVE(S) 3 2 5 LIVES IN CHURCH-OWNED OR RELIGIOUS 7 5 7 12 ORGANIZATION-OWNED HOME 8 OTHER 5 9 14 Note: An imputed version of this variable is available in: "Ancillary Data: Economic Imputations" sr021re: How much do you think your home would sell for now? Data source: Sibling Respondent Collected in: 1993-94 Mode: phone Source variables: 814s, RR021RE - 2 - Wisconsin Longitudinal Study Codebook Frequencies Value Label Male Female Total .
    [Show full text]
  • Iranians in 9Th Century Egypt
    Chapter 8 Iranians in 9th Century Egypt Lucian Reinfandt The Islamic caliphate was an empire of migration, and one is tempted to ask whether migration was indeed the backbone of Islam. The hijra (lit. “migra- tion”) of the prophet Muhammad in 622 a.d. from Mecca to Medina became the blueprint for all later migration.1 During the Arab conquests of the 7th and early 8th centuries, Arab tribes migrated and settled in all parts of the new empire as a military and political elite separated by religion from non-Muslim population majorities.2 Another phenomenon was a long-distance trade with networks of traders traveling over the Silk Road and the Indian Ocean, the pro- verbial Sindbad being but a representative for many real ones.3 Thirdly, there was a zest for learning in Islamic culture, which is summarized by a famous saying of the prophet Muhammad (“seek knowledge even as far as China!”).4 Migration between the urban intellectual centres of North Africa and the Mid- dle East was a prevalent phenomenon during the whole era of pre-modern Is- lam, and celebrities such as Ibn Khaldun of Ibn Battuta (both 14th century) are only two examples out of many. Finally, there is the obligation for every Mus- lim to undertake the pilgrimage to Mecca and Medina at least once in a life- time, which caused the regular movement of many pilgrims on an annual basis through all parts of the Muslim world.5 1 A variant understanding of the word hijra in the sense of “conversion to Islam”, as is used by e.g.
    [Show full text]
  • Ultimate Scope Schematic
    Area Under Construction Guard Posts Posts Posts Guard Guard Guard Retaining Wall Wall Wall Retaining Retaining Retaining Tent Tent Tent Slab Slab Slab Retaining Wall Wall Wall Retaining Retaining Retaining N 62%%d 21' 02" E N 62%%d 21' 02" E N 62%%d 21' 02" E Paved Parking Parking Parking Paved Paved Paved 360+00 Sign Sign Sign 360+00 Ramp Ramp Ramp Slab Slab Slab Slab Slab Slab MH Sign Sign Sign Paved Parking 114 114 SCHEM*02.DGN Slab CURVE DATA 3433 121FRE-5 114 Slab Slab Slab Seg 4 TFP RAILROAD MARSHALL N 68%%d 46' 43" E SHEET 2 Slab Slab TEXAS 121MLW 121FRW-3 Slab 156 CURVE TEXAS 377 Pop 315 Slab Slab 114 CREEK Slab NUM DELTA DEGREE TANGENT RADIUS PI STATION PI NORTHING PI EASTING PC STATION PT STATION PACIFIC 121MLE R.O.W. LENGTH BN RR 114 B N S F Pipe UNION ROLL 2 Billboard Pile Pile Pile Stock Stock RETAINING WALLS Stock Index of Schematic Rolls NEWARK C 20 PARCEL OWNER 81 SUPERELEVATION TRANSITION TABLE TROPHY CLUB L 121E820-2 820S-HE-11 ROANOKE 360+00 114 287 WALL BEGINNING ENDING 20 Unknown 118 360+00 FORT WORTH 377 IH 820 GENERAL PURPOSE LANES Ramp Ramp Ramp ALLIANCE 21 NAME ALIGNMENT STATION & OFFSET STATION & OFFSET 21 Unknown Obscured WISE COUNTY 170 EXIST PROP BEGIN BEGIN END TRANSITION FULL END FULL END END ROLL 1: IH820 PLAN Approx RW121R359 Area 820GPN-3 2^ 29' 59.42" (LT) 0^ 42' 58.31" 174.55' 349.04' 8,000.00' 767+23.89 6,977,548.68 2,364,541.55 765+49.34 768+98.39 AIRPORT 114 377 360+00 156 DENTON COUNTY Sign Sign IH 820 NB/SB RW820L757 820GPS 756+75.78, 73.97' LT 768+69.47, 112.26' LT 22 PS Texas Holdings, Ltd.
    [Show full text]