Laboratory Supplies and Equipment
Total Page:16
File Type:pdf, Size:1020Kb
Laboratory Supplies and Equipment Beakers: 9 - 12 • Beakers with Handles • Printed Square Ratio Beakers • Griffin Style Molded Beakers • Tapered PP, PMP & PTFE Beakers • Heatable PTFE Beakers Bottles: 17 - 32 • Plastic Laboratory Bottles • Rectangular & Square Bottles Heatable PTFE Beakers Page 12 • Tamper Evident Plastic Bottles • Concertina Collapsible Bottle • Plastic Dispensing Bottles NEW Straight-Side Containers • Plastic Wash Bottles PETE with White PP Closures • PTFE Bottle Pourers Page 39 Containers: 38 - 42 • Screw Cap Plastic Jars & Containers • Snap Cap Plastic Jars & Containers • Hinged Lid Plastic Containers • Dispensing Plastic Containers • Graduated Plastic Containers • Disposable Plastic Containers Cylinders: 45 - 48 • Clear Plastic Cylinder, PMP • Translucent Plastic Cylinder, PP • Short Form Plastic Cylinder, PP • Four Liter Plastic Cylinder, PP NEW Polycarbonate Graduated Bottles with PP Closures Page 21 • Certified Plastic Cylinder, PMP • Hydrometer Jar, PP • Conical Shape Plastic Cylinder, PP Disposal Boxes: 54 - 55 • Bio-bin Waste Disposal Containers • Glass Disposal Boxes • Burn-upTM Bins • Plastic Recycling Boxes • Non-Hazardous Disposal Boxes Printed Cylinders Page 47 Drying Racks: 55 - 56 • Kartell Plastic Drying Rack, High Impact PS • Dynalon Mega-Peg Plastic Drying Rack • Azlon Epoxy Coated Drying Rack • Plastic Draining Baskets • Custom Size Drying Racks Available Burn-upTM Bins Page 54 Dynalon® Labware Table of Contents and Introduction ® Dynalon Labware, a leading wholesaler of plastic lab supplies throughout North America, is the wholesale division of Dynalab Corp. Founded in 1957, Dynalon Labware is proud to be your supplier of choice for over 50 years. 2 Catalog Introduction 55 - 56 Drying Racks 80 - 81 Shields 2 - 7 Technical Plastic Properties 56 Evaporating Dishes 81 - 83 Slide Accessories 8 Bags, Bag Ties & Baritainers 56 Eye Wash Station 83 - 84 Spatulas 9 - 12 Beakers, Beakers with Handle 57 - 59 Flasks 84 Spigot, Sponge, Spot Plates 13 - 17 Beta Radiation Protection 60 Forceps 85 Spot Plates 17 - 32 Bottles and Accessories 60 - 63 Funnels 85 - 88 Stirring Bars and Accessories 32 Bucket, Ice 63 Gamma Protection Products 88 - 89 Stirrers 33 Burettes 64 Glass Sleeves, Hydrometer 89 Stopcocks 34 - 37 Carboys 64 Imhoff 90 Swabs, Tape, Thermal Cyclers 38 Chiller 65 Innoculating 91 - 92 Tote Boxes 38 Clamps 65 - 66 Labels 92 - 95 Trays 38 - 42 Containers 67 Matting 95 Tubes 42 Crucibles 68 Melting Point Apparatus 96 - 99 Tube Racks 43 Cutting Boards 68 - 69 Paddles 99 - 100 Tubing 43 - 45 Cuvettes and accessories 69 - 70 Pails 100 - 102 Tubing Accessories 45 - 48 Cylinders and accessories 70 Parafilm Dispenser, Petri 103 Tweezers 48 Delivery Tubes 71 Pipettes 103 - 104 Vials 49 - 50 Desiccators 72 - 73 Pipette Accessories 104 - 105 Vial Racks 50 Detergent 73 Pipette Tips 105 Watch Glass, Water Still 50 Dippas® 74 - 75 Pipettors Accessories 106 Weighing Bottles 51 Dippers 76 Pumps 106 - 107 Wip, Wipe Dispensers 52 - 53 Dipping Baskets 77 Racks 108 - 111 Index 54 - 55 Disposal Boxes 78 - 79 Sample Cups, Samplers 112 Custom Plastic Fabrication 55 Droppers 79 - 80 Scoops Labware Starter Kit This versatile pack contains over 45 safe and popular plastic labwar e products for young scientists especially in Elementary, Middle and High schools. Teach storage, measurement, pipeting, dispensing etc. in both English and metric. Duplicate products allow sharing amongst students. Item Polymer Description Quantity 237755 PMP Transparent Economy Molded Cylinder, 50mL 1 237765 PMP Transparent Economy Molded Cylinder, 100mL 1 237775 PMP Transparent Economy Molded Cylinder, 250mL 1 226415-0070 HDPE Cylindrical Jar with Screw Closure & Insert, 70mL 1 226415-0500 HDPE Cylindrical Jar with Screw Closure & Insert, 500mL 1 226415-1000 HDPE Cylindrical Jar with Screw Closure & Insert, 1000mL 1 259845 HDPE Test Tube Rack, Two Tier, for up to 18mm Tubes 1 262175 LDPE Droppers, Bellow-Type Bulb, 1.5mL 5 262185 LDPE Droppers, Bellow-Type Bulb, 5.0mL 5 299334-000B PP/LDPE Test Tube/Centrifuge Tube, Blue Closure, 16mm 2 299334-000R PP/LDPE Test Tube/Centrifuge Tube, Red Closure, 16mm 2 299334-000W PP/LDPE Test Tube/Centrifuge Tube, White Closure, 16mm 2 299334-000Y PP/LDPE Test Tube/Centrifuge Tube, Yellow Closure, 16mm 2 412575 NYL Spatula/Stirrer 10" 3 426364-07 PS Transparent Container w/ Snap-on Cap, 7Dram/24mL 3 501505-0125 PP Graduated Bottle Wide Mouth w/ Marking Area, 125mL 1 501505-0250 PP Graduated Bottle Wide Mouth w/ Marking Area, 250mL 1 502754-02 PS Pipette Graduated 2mL 5 506805-0250 LDPE Wash Bottle Narrow Mouth Sloped w/ White Clsr 250mL 1 522085-0100 PP Printed “Square Ratio” Beaker, 100mL 1 522085-0250 PP Printed “Square Ratio” Beaker, 250mL 1 326495-0500 PP Beaker with Handle, 500mL 1 537835-0100 PP Graduated Cylinder w/ Graduations, Squat Form, 100mL 1 542365-04 PP Lightweight Funnels, 50mm ID 1 605085-0005 LDPE Dispensing Bottle 15mL 1 605085-06 LDPE Dispensing Bottle 180mL 1 Lab Starter Pack Labware Starter Pack $100.03 each quality . value . service Copyright Dynalab Corp. 2016 and earlier. 1 Plastics properties& LDPE (Low Density Polyethylene) HDPE (High Density Polyethylene) Introduction • Translucent naturally • Translucent rigid polymer flexible polymer • Temperature range of ® The Dynalon catalog technical • Temperature range of -100 to +120ºC section aims to provide clear, concise information about the -50 to +80ºC • Not autoclavable key polymers from which our • Not autoclavable • Good to excellent chemical ranges are manufactured. It is • Good to excellent chemical resistance intended as your guide to the resistance • High impact resistance suitability of our products for use with a variety of chemical • Robust and virtually unbreakable • Used for storage bottles, groups, and in a variety of • Used for wash bottles, storage containers and jars environments. bottles, transfer pipettes, vials Excellent resistance (no attack) Each polymer has its own entry Excellent resistance (no attack) to dilute and concentrated Acids, with detailed technical information and a summary to dilute and concentrated Acids, Alcohols and Bases. icon denoting its general Alcohols, Bases and Esters. Good resistance (minor attack) chemical suitability Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and characteristics. Those Polymers capable of being repeatedly to Aldehydes, Ketones and Aromatic Hydrocarbons, Ketones Autoclaved at, at least 121°C Vegetable Oils. and Mineral and Vegetable Oils. for 30 minutes are denoted by Limited resistance (moderate Limited resistance (moderate the letter A, more detailed temperature resistance is often attack suitable for short term use attack and suitable for short term included in the text. only) to Aliphatic and Aromatic use only) to Halogenated Hydrocarbons, Mineral Oils and Hydrocarbons and Oxidizing The information within this Oxidizing Agents. Agents. section is designed to answer most common application Poor resistance and not questions but like any guide recommended for use with quick facts will not answer all. Dynalon's Halogenated Hydrocarbons. Maximum Temperature: Technical Department will be pleased to answer any 248°F (120°C) question relating to quick facts Minimum Temperature: product usage. Maximum Temperature: -148°F (-100°C) 176°F (80°C) Autoclavable: No Minimum Temperature: UV Resistance: Poor -58°F (-50°C) Translucent and Rigid Autoclavable: No Recycling Code: 2 UV Resistance: Poor Translucent with Excellent flexibility HDPE Recycling Code: 4 LDPE 2 Dynalon® Labware chemical resistance PP (Polypropylene) PMP (Polymethylpentene) PS (Polystyrene) • Translucent rigid polymer • Transparent rigid polymer • Transparent rigid polymer • Temperature range • Temperature range • Temperature range 0 to +135ºC 0 to +145ºC -10 to +70ºC • Autoclavable (repeatedly) • Autoclavable • Not autoclavable • Good to excellent chemical • Good to excellent chemical • Moderate chemical resistance resistance resistance • Brittle yet has excellent clarity • Impact resistant • Glass like clarity • Used for petri dishes, pipettes • Used for beakers, bottles, • Used for transparent beakers and container ware cylinders and screw closures and cylinders Excellent resistance (no attack) Excellent resistance (no attack) Excellent resistance (no attack) to dilute Acids, Alcohols and to most Acid solutions, Alcohols, to dilute and concentrated Acids, Mineral Oils. Bases and Mineral Oils. Alcohols, Bases and Mineral Oils. Good resistance (minor attack) Good resistance (minor attack) Good resistance (minor attack) to Vegetable Oils. to Aldehydes, Esters, Aliphatic to Aldehydes, Esters, and Limited resistance (moderate Hydrocarbons, Ketones & Vegetable Vegetable Oils. attack and suitable for short Oils. Limited resistance (moderate term use only) Limited resistance (moderate attack and suitable for short term to concentrated Acids. attack and suitable for short term use only) to Aliphatic and Poor resistance not recom- use only) to Aromatic and Aromatic Hydrocarbons, Ketones mended for use with Aldehydes, Halogenated Hydrocarbons and and Oxidizing Agents. Esters, Aliphatic, Aromatic and Oxidizing Agents. Poor resistance not Halogenated Hydrocarbons, recommended for use with Ketones and Oxidizing Agents. quick facts Halogenated Hydrocarbons. Maximum Temperature: quick facts 275°F (135°C) quick facts Maximum Temperature: Minimum Temperature: Maximum Temperature: 158°F (70°C) 32°F (0°C) 293°F (145°C) Minimum Temperature: Autoclavable: Yes Minimum Temperature: 32°F (0°C) UV Resistance: