DOCSLIB.ORG

DAF Truck Spare Parts and Accessories

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
DAF Truck Spare Parts and Accessories www.europart.net DAF Truck Spare parts and accessories Spare parts to fit: XF, CF, LF Technical equipment and accessories EUROPART – Europe's No. 1 for truck, trailer, van and bus spare parts. www.europart.net Exacting standards required. Impressive quality delivered. The EUROPART brand: Excellent products, based on manufacturer standards With EUROPART own-brand products, you Our strict and careful selection of suppliers benefi t from a competitively priced alternative. refl ects our high standards. These are products Whether you need vehicle parts such as brake that impress even under extreme conditions discs, linings, batteries and fi lters or workshop and are of a quality based on manufacturer materials such as chemical products, oils and standards. This you can depend on – always. tools – our constantly growing and technically advanced range of over 6,500 own-brand products provides the right solution for every situation and every customer requirement. EUROPART – Europe's No. 1 for truck, trailer, van and bus spare parts. Dear Customers, this catalogue offers you an overview of our top sellers that are suitable for DAF trucks. From our comprehensive range we have compiled about 1,500 items for you, that are suitable for the XF, CF and LF series from model years 1997 to 2016. The catalogue is clearly divided by series in the product areas: • engine • axles and steering • lighting and electrics • drive • braking system • bodywork • suspension and damping • compressed air • cab Series overview: Model series Model year Cab variants XF Euro 6 2012- Comfort Cab, Space Cab, Super Space Cab XF105 2005- Comfort Cab, Space Cab, Super Space Cab XF95 2002- Comfort Cab, Space Cab, Super Space Cab 95XF 1997- Comfort Cab, Space Cab, Super Space Cab CF Euro 6 2013- Day Cab, Sleeper Cab, Space Cab CF85 2001- Day Cab, Sleeper Cab, Space Cab CF75 2001- Day Cab, Sleeper Cab, Space Cab CF65 2001- Day Cab, Sleeper Cab, Space Cab 85CF 1998- Day Cab, Sleeper Cab 75CF 1998- Day Cab, Sleeper Cab 65CF 1998- Day Cab, Sleeper Cab LF Euro 6 2013- Day Cab, Sleeper Cab LF55 2001- Day Cab, Sleeper Cab LF45 2001- Day Cab, Sleeper Cab In addition, in a comprehensive accessories section we offer you an overview of universal equipment items for your DAF vehicles as well as suitable products for your workshop. Are you looking for a particular item that is not shown in the catalogue or do you have questions about a product? Please contact us. We‘ll be happy to help. Tips for using the catalogue: The vehicle descriptions and engine types serve as guidance during identification of the precise vehicle application*. To identify a part - specific to your vehicle - please contact your EUROPART subsidiary with the complete Vehicle Identification Number (VIN, see page 4) or use the vehicle part search in our EUROPART Workshop Online System EWOS (www.ewos.net). * Insofar as brand names of vehicle manufacturers are used in the catalogue, they are to be understood as designation information. The brand names indicate that the corresponding items are suitable for the named vehicle. The cross-reference numbers given on the pages of the catalogue serve for the purposes of identification. Vehicle identifi cation The VIN number will be found on the vehicle type plate which is located on the door frame, it is also stamped into the vehicle chassis near the front right-hand wheel. Breakdown of the DAF Vehicle Identifi cation Number (VIN): Example: XLR T E 47 M S 0 E 535453 World Manufacturer Identifi er code Chassis number (WMI code) for DAF Trucks Vehicle construction (T = tractor) Assembly site (E = Eindhoven) Axle confi guration (E = 4 x 2) Model year code (0 = standard) Series (47 = XF105, XF95, 95XF) Engine type (S = turbo with charge air cooler) Engine capacity (M = Paccar/DAF 12.9 l) EUROPART – Europe‘s No. 1 for truck, trailer, van and bus spare parts. Composition of the DAF vehicle type designation: Example: CF 460 FTT 6 x 4 Model series Axle configuration PS-number Chassis type Axle types/axle configurations: Truck chassis FA 4 x 2 Truck with drive axle FAR 6 x 2 Truck with drive axle and tag axle (single tyre) FAS 6 x 2 Truck with drive axle and tag axle (dual tyres) FAG 6 x 2 Truck with steered pusher axle and drive axle FAN 6 x 2 Truck with drive axle and steered tag axle FAT 6 x 4 Truck with 2 drive axles FAK 8 x 2 Truck with steered pusher axle, drive axle and tag axle (dual tyres) FAQ 8 x 2 Truck with steered pusher axle, drive axle and steered tag axle FAC 8 x 2 Truck with 2 front axles, drive axle and tag axle (dual tyres) FAX 8 x 2 Truck with 2 front axles, drive axle and steered tag axle FAD 8 x 4 Truck with 2 front axles and 2 drive axles Tractor vehicles FT 4 x 2 Tractor vehicle with drive axle FTG 6 x 2 Tractor with steered pusher axle and drive axle FTP 6 x 2 Tractor with rigid pusher axle (baby axle) and drive axle FTN 6 x 2 Tractor with drive axle and steered tag axle FTR 6 x 2 Tractor with drive axle and tag axle (single tyre) FTS 6 x 2 Tractor with drive axle and tag axle (dual tyres) FTT 6 x 4 Tractor with 2 drive axles FTM 8 x 4 Tractor with steered pusher axle and 2 drive axles www.europart.net Urgent questions? Direct assistance. Telephone support: EUROPART technicians are ready to help you Customer satisfaction in our top priority. That‘s problems, providing technical support as well why you can expect not only high-quality as a reliable fault diagnosis service. products from EUROPART, but also a friendly We will also be happy to provide you with free and expert service team who are ready to help remote maintenance using a secure remote you by phone. connection. Whether your components are made Contact our qualified EUROPART technicians by Haldex, Knorr or WABCO – contact us directly who will not only give you expert advice but to make use of our expertise. will also assist you with your questions and EUROPART – Europe‘s No. 1 for truck, trailer, van and bus spare parts. Technical equipmentandaccessories Technical CF XF LF 4 3 2 1 8 | 1 www.europart.net | 9 1 XF Engine ............................................................................................10–25 Drivetrain ........................................................................................26–32 Suspension and damping ...............................................................33–36 Axles and steering ..........................................................................37–49 Braking system ...............................................................................50–52 Compressed air ..............................................................................53–66 Lighting and electrics ......................................................................67–79 Bodywork ........................................................................................80–93 Cab ...............................................................................................94–107 10 | Engine Engine Parts 1 suitable for engine type MX-13 (Euro 6), installed in DAF XF Euro 6 Description Version Number per engine Order no. XF Crankshaft seal front 1 8002 001 815 Crankshaft seal rear 1 8001 997 517 Cylinder head gasket 1 8002 002 396 Cylinder head screw set 1 8002 002 389 Main bearing pair standard 7 1910 024 111 Oil pan gasket 1 8002 002 433 Stop disc set standard 1 1910 024 113 Valve cover gasket 1 8002 002 393 Engine Parts suitable for engine type MX-11 (Euro 6), installed in DAF XF Euro 6 Description Version Number per engine Order no. Crankshaft seal front 1 8002 002 397 Crankshaft seal rear 1 8002 002 204 Cylinder head gasket 1 8002 002 398 Oil pan gasket 1 8002 002 434 Engine Parts suitable for engine type 1290 XE, MX 105 (Euro 5, EEV), installed in DAF XF105 Description Version Number per engine Order no. Crankcase seal set 1 8002 047 182 Crankshaft seal front 1 8002 001 815 Crankshaft seal rear 1 8001 997 517 Cylinder head gasket set 1 8002 047 148 Cylinder head screw set 1 8002 002 389 Cylinder liner wet 6 1911 020 465 Cylinder liner end seal set 1 1911 020 526 Main bearing pair standard 7 1910 024 111 Oil pan gasket 1 8002 047 188 Piston ring set set per piston 6 1911 020 574 Stop disc set standard 1 1910 024 113 www.europart.net Engine | 11 Engine Parts 1 suitable for engine type 1260 XE (Euro 3), installed in DAF XF95 Description Version Number per engine Order no. XF Connecting rod bearing pair standard 6 1910 038 519 Crankcase seal set 1 8002 044 470 Crankshaft seal front 1 8002 049 021 Crankshaft seal rear 1 8002 048 893 Cylinder head gasket set 1 8002 013 457 Cylinder head screw M16, 146 mm 34 1911 184 761 Cylinder head screw M12, 140 mm 8 1911 184 760 Cylinder liner dry 6 1911 012 378 Main bearing set standard 1 1910 042 771 Oil pan gasket 1 8002 047 663 Piston ring set set per piston 6 1911 042 108 Piston with pin and rings XE 315 C 1, 1 x valve seat pocket 6 6001 619 840 Piston with pin and rings XE 315 C 1, 3 x valve seat pocket 6 1911 037 784 Piston with pin and rings XE 355 C 1, 3 x valve seat pocket 6 1911 037 583 Stop disc set standard 1 1910 042 734 Engine Parts suitable for engine type 1260 XE (Euro 3), installed in DAF 95XF Description Version Number per engine Order no. Connecting rod bearing set standard 1 1910 042 468 Crankcase seal set 1 8002 044 470 Crankshaft seal rear 1 8002 048 893 Crankshaft seal front 1 8002 049 021 Cylinder head gasket set ZKD soft material 1 8002 043 790 Cylinder head gasket set 1 8002 013 457 Cylinder head screw M16, 146 mm 34 1911 184 761 Cylinder head screw M12, 140 mm 8 1911 184 760 Cylinder liner dry 6 1911 012 378 Main bearing set standard 1 1910 042 771 Oil pan gasket 1 8002 047 663 Piston ring set set per piston 1 1911 042 108 Piston with pin and rings 6 1911 020 154 Stop disc set standard 1 1910 042 734 Engine Parts suitable for engine type 1260 XF (Euro 2), installed in DAF 95XF Description Version Number per engine Order no.
Load more

Recommended publications
  • Phenomena of Perturbation in Electrical Systems
    Chapter 1 Phenomena of Perturbation in Electrical Systems 1.1. Electromagnetic perturbations in energy systems 1.1.1. Introduction Power electronic systems are increasingly being used in every field; initially, they were used in the industrial sector and then used increasingly in transportation, services and housing sectors. The flexibility in the control of electrical energy explains this evolution well. For the purposes of illustration, we estimate that the electrification of service or control functions in an aircraft offers the following gains1: – 10% on the mass; – 9% onCOPYRIGHTEDfuel consumption; MATERIAL – 13% on thrust from the engines; – 15% on maintenance costs; – 10% on the buying price. 1 According to SAFRAN company, symposium SPEC 2007. 2 Electromagnetic Compatibility in Power Electronics The field of automobiles is also subject to this evolution: the development of hybrid vehicles over the last 10 years and, more recently, the re-emergence of the fully electric car (while waiting for fuel cells vehicles) are evidence of this. Already, a large number of services have been electrified in thermal engine automobiles because of the flexibility of controls (speed variation) and high yield of the electrical systems: power steering, anti-blocking system (ABS), various pumps, window winders, air conditioning (to come). The introduction of this technology, as a consequence, must take into consideration its implementation constraints; electromagnetic compatibility (EMC) in particular. Indeed, static converters based on power electronics are important sources of electromagnetic perturbations that can occasionally cause malfunctions in their local or distant electronic environment: avionics, navigation systems, reception antennae, etc. Thus, it is important to understand the origin of these phenomena, their mode of propagation and the effects on their potential “victims” in order to optimize the essential reduction or protection devices necessary to conform to the standards of EMC.
    [Show full text]
  • WP7 Safety Assessment: Experimental Testing
    WORK PACKAGE 7 Safety Assessment: Experimental Testing – Ignition Potential WP7 SAFETY ASSESSMENT The Hy4Heat Safety Assessment has focused on assessing the safe use of hydrogen gas in certain types of domestic properties and buildings. The evidence collected is presented in the reports listed below, all of which have been reviewed by the HSE. The summary reports (the Precis and the Safety Assessment Conclusions Report) bring together all the findings of the work and should be looked to for context by all readers. The technical reports should be read in conjunction with the summary reports. While the summary reports are made as accessible as possible for general readers, the technical reports may be most accessible for readers with a degree of technical subject matter understanding. Safety Assessment: Safety Assessment: Precis Gas Dispersion Modelling Assessment An overview of the Safety Assessment work A modelling assessment of how natural gas and undertaken as part of the Hy4Heat programme. hydrogen gas disperses and accumulates within an enclosure (e.g. in the event of a gas leak in a building). Safety Assessment: Conclusions Report Safety Assessment: (incorporating Quantitative Risk Assessment) Gas Dispersion Data Analysis A comparative risk assessment of natural gas A review of experimental data focusing on how versus hydrogen gas, including a quantitative risk natural gas and hydrogen gas disperses and assessment; and identification of control measures accumulates within an enclosure (e.g. in the event of to reduce risk and manage hydrogen gas safety for a a gas leak in a building). community demonstration. Safety Assessment: Safety Assessment: Gas Escape Frequency and Magnitude Consequence Modelling Assessment Assessment A comparative modelling assessment of the An assessment of the diferent causes of existing consequences in the event of a gas leak and ignition natural gas leaks and the frequency of such events; event for natural gas and hydrogen gas.
    [Show full text]
  • 2021 05 11 Web Disb
    City of Cedar Rapids Accounts Payable Expenditures for the Period ending May 11, 2021 Name Vendor Department Name Voucher Invoice Date Description Qty Unit Price Amount 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00383977 V0046-4 2021-05-01 Rental Assistance 0 0.00 545.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00383997 V0079-11 2021-05-01 Rental Assistance 0 0.00 337.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00384187 V0486-9 2021-05-01 Rental Assistance 0 0.00 371.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00384448 V0993-7 2021-05-01 Rental Assistance 0 0.00 465.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00384477 V1046-2 2021-05-01 Rental Assistance 0 0.00 368.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00384817 V2139-3 2021-05-01 Rental Assistance 0 0.00 292.00 2200 Buckingham LLC 0000017713 Leased Housing - HAP 00384899 V2604-7 2021-05-01 Rental Assistance 0 0.00 727.00 29th Street Properties LLC 0000015983 Leased Housing - HAP 00383959 V0003-1 2021-05-01 Rental Assistance 0 0.00 240.00 29th Street Properties LLC 0000015983 Leased Housing - HAP 00384035 V0163-9 2021-05-01 Rental Assistance 0 0.00 359.00 29th Street Properties LLC 0000015983 Leased Housing - HAP 00384260 V0666-6 2021-05-01 Rental Assistance 0 0.00 359.00 29th Street Properties LLC 0000015983 Leased Housing - HAP 00384275 V0685-8 2021-05-01 Rental Assistance 0 0.00 58.00 29th Street Properties LLC 0000015983 Leased Housing - HAP 00384450 V0997-11 2021-05-01 Rental Assistance 0 0.00 348.00 29th Street
    [Show full text]
  • A Discrete Dimming Ballast for Linear Fluorescent Lamps
    A DISCRETE DIMMING BALLAST FOR LINEAR FLUORESCENT LAMPS HAIYAN WANG Bachelor of Science in Electrical Engineering Beijing University of Aeronautics and Astronautics July, 1994 Submitted in partial fulfillment of requirement for degree MASTER OF SCIENCE OF ELECTRICAL ENGINEERING at the I CLEVELAND STATE UNIVERSITY December, 2003 CLEVELAND STATE UNIVERSITY LIBRARY OCopy-rightby ��AIYANWANG 2003 A CKNOWNLEDGEMENTS I would like to thank Dr. Ana Stankovic for the support and encouragement she gave towards the development of the thesis. Special thanks to David Kachmarik, Dr. Louis Nerone, and Timothy Chen for guiding me throughout the thesis and my time at GE lighting. I would also like to thank Dr. F.E. Villaseca and Dr. Dan Simon for their valuable suggestions for my thesis. Finally, endless thanks to my family for supporting me to gain a higher education. DISCRETE DIMMING BALLAST FOR LINEAR FLUORESCENT LAMPS HAIYAN WANG ABSTRACT A new discrete dimming ballast for the linear fluorescent lamps is proposed in this paper. The dimming control circuit is combined with a ballast module for multiple lamps to realize three discrete lighting levels control. Compared with conventional step dimming or odoff control methods, the proposed discrete dimming method has following advantages: (1) Digital signal is generated by the dimming control circuit to control the lamps on and off, which makes the system more reliable and integrated. (2) The proposed discrete dimming system replace the relays, which are necessary in conventional lamp on/off control, and decrease the system cost. (3) The proposed dimming ballast can be installed by keeping the original wiring system. This makes the upgrading lighting system more effective and efficient.
    [Show full text]
  • CO2 Mass Transfer in a Novel Photobioreactor
    CO 2 Mass Transfer in a Novel Photobioreactor A thesis presented to the faculty of the Russ College of Engineering and Technology of Ohio University In partial fulfillment of the requirements for the degree Master of Science Adam Mielnicki August 2011 © 2011 Adam Mielnicki. All Rights Reserved. 2 This thesis titled CO 2 Mass Transfer in a Novel Photobioreactor by ADAM MIELNICKI has been approved for the Department of Chemical and Biomolecular Engineering and the Russ College of Engineering and Technology by David J. Bayless Loehr Professor of Mechanical Engineering Dennis Irwin Dean, Russ College of Engineering and Technology 3 Abstract MIELNICKI, ADAM, M.S., August 2011, Chemical Engineering CO 2 Mass Transfer in a Novel Photobioreactor Director of Thesis: David J. Bayless A novel carbon capture and storage (CCS) technology at the center of this investigation involves the biosequestration of CO 2 via cyanobacterial photosynthetic processes. A simulated flue gas stream introduces CO 2 into a temperature controlled photobioreactor where cyanobacteria are nourished with a flowing growth solution. Before the microorganism can fix carbon, CO 2 has to dissolve in the liquid growth solution. The absorption of CO 2 presents a potential limiting step in cyanobacterial growth and is therefore in need of quantification. In this study, the effects of growth solution flow rate on the liquid side mass transfer coefficient (k L) were observed and a model was selected for k L prediction. Both the model and experimental data showed that k L tends to increase with flow rate. Gaseous CO 2 concentration was manipulated as well and was shown to affect overall mass transfer but not k L.
    [Show full text]
  • Erres KY 159
    Erres KY 159 Foto: Piet Blaas The restoration of an uncommon radio set By Jacques Hermans & Paul Bolt Index: 1. The acquisition 2. To restore or not to restore 3. The circuit diagram 4. The casing 5. First-class demolition 6. Rejuvenating the chassis 7. Repairing the electrolytic capacitors 8. The tar capacitors 9. The build-up 10. Voltage, current, music 11. Summary 1. The acquisition It is the first Saturday of august, 2008 and I am browsing a familiar exhibition for old technology in the small town Hoenderloo. Aside from some parts I had not yet made any purchases and was about to head home, when I laid my eyes on a radio set that I did not immediately recognize. The Erres-buttons instantly caught my attention. The set had endured a lot and the back wall of the casing was missing. The nameplate indicated that this was the KY 159 (serial number 1161) made in 1936 and after some negotiating the device changed hands. At home, the radio set was more thoroughly inspected. This turned out to be a letdown... Picture 1.1 The casing looked a lot less flourishing than it looked on the sunny market stand. The damage to and stains on the casing would not give in to basic cleaning and scrubbing. In some occasions furniture oil can provide a great result, which would make stripping, coloring and varnishing not necessary. Unfortunately this was not the case (picture 1.1). A quick look at the interior did not make my heart skip a beat either.
    [Show full text]
  • Download the 2021 IEEE Thesaurus
    2021 IEEE Thesaurus Version 1.0 Created by The Institute of Electrical and Electronics Engineers (IEEE) 2021 IEEE Thesaurus The IEEE Thesaurus is a controlled The IEEE Thesaurus also provides a vocabulary of almost 10,900 descriptive conceptual map through the use of engineering, technical and scientific terms, semantic relationships such as broader as well as IEEE-specific society terms terms (BT), narrower terms (NT), 'used for' [referred to as “descriptors” or “preferred relationships (USE/UF), and related terms terms”] .* Each descriptor included in the (RT). These semantic relationships identify thesaurus represents a single concept or theoretical connections between terms. unit of thought. The descriptors are Italic text denotes Non-preferred terms. considered the preferred terms for use in Bold text is used for preferred headings. describing IEEE content. The scope of descriptors is based on the material presented in IEEE journals, conference Abbreviations used in the Thesaurus: papers, standards, and/or IEEE organizational material. A controlled BT - Broader term vocabulary is a specific terminology used in NT - Narrower term a consistent and controlled fashion that RT - Related term results in better information searching and USE- Use preferred term retrieval. UF - Used for Thesaurus construction is based on the ANSI/NISO Z39.19-2005(2010) standard, Guidelines for the Construction, Format, and Management of Monolingual Controlled Vocabulary. The Thesaurus vocabulary uses American-based spellings with cross references to British variant spellings. The scope and structure of the IEEE Thesaurus reflects the engineering and scientific disciplines that comprise the Societies, Councils, and Communities of the IEEE in *Refer to ANSI/NISO NISO Z39.19-2005 addition to the technologies IEEE serves.
    [Show full text]
  • Energy Efficiency – HID Lighting
    PDHonline Course E423 (5 PDH) Energy Efficiency High Intensity Discharge Lighting Instructor: Lee Layton, P.E 2014 PDH Online | PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.PDHonline.org www.PDHcenter.com An Approved Continuing Education Provider www.PDHcenter.com PDHonline Course E423 www.PDHonline.org Energy Efficiency High Intensity Discharge Lighting Lee Layton, P.E Table of Contents Section Page Introduction ………………………………….….. 3 Chapter 1, Lighting Market ………………….….. 5 Chapter 2, Fundamentals of Lighting ………….... 16 Chapter 3, Characteristics of HID Lighting……... 28 Chapter 4, Types of HID Lighting……………..... 37 Summary ……………………………………..…. 66 © Lee Layton. Page 2 of 66 www.PDHcenter.com PDHonline Course E423 www.PDHonline.org Introduction Gas-discharge lamps are light sources that generate light by sending an electrical discharge through an ionized gas. The character of the gas discharge depends on the pressure of the gas as well as the frequency of the current. High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting. Figure 1 shows a typical high-intensity discharge lamp. In a high-intensity discharge lamp, electricity arcs between two electrodes, creating an intensely bright light. Usually a gas of mercury, sodium, or metal halide acts as the conductor. HID lamps use an electric arc to produce intense light. Like fluorescent lamps, they require ballasts. They also take up to 10 minutes to produce light when first turned on because the ballast needs time to establish the electric arc.
    [Show full text]
  • FLR) for Fusion Power
    Informal Report A Conceptual Design of the Fast-Liner Reactor (FLR) for Fusion Power oCO "co LOS ALAMOS SCIENTIFIC LABORATORY Post Office Box 1663 Los Alamos. New Mexico 87545 TjyK m xmt OOCUKJE^T IS UNLKOTED LA-7686-MS Informal Report UC-20d Issued: February 1979 A Conceptual Design of the Fast-Liner Reactor (FLR) for Fusion Power R. W. Moses R. A. Krakowski R. L. Miller MAJOR CONTRIBUTORS G. E. Cort (heat transfer), R. A. Gerwin (physics), R. L. Hagenson (plasma engineering, costing), J. D. Jacobson (blast confinement), T. R. Jarboe (physics), R C. Malone (physics), T. A. Oliphant (numerical techniques), P. D. Soran (neutronics), and C. E. Swannack (energy storage and tninsfer). This work was supported by the US Department of Energy, Office of Fusion Energy, and in part by the Electric Power Research Institute. IftSl CONTENTS ABSTRACT 1 I. INTRODUCTION AND SUMMARY 1 II. SUMMARY DESCRIPTION OF REACTOR OPERATION 3 III. PHYSICS AND TECHNOLOGY DESIGN BASES 7 A. Reactor Physics 7 1. Plasma Model 7 a. Radial Transport 9 b. Axial Transport 10 c. Burn Dynamics 11 2. Liner Model 11 a. Stability 12 b. Dynamics 13 3. Numerical Methods 14 4. Development of Physics Operating Point 14 B. Reactor Engineering/Technology 20 1. Energy Balance 21 2. Plasma Preparation 23 3. Energy Storage, Switching, and Transfer 24 4. Liner Leads 26 5. Neutronics Analysis 32 6. Blast Containment 39 7. Heat Transfer 46 C. Costing Model 50 D. Design Point 52 IV. PRESENT KNOWLEDGE IN PHYSICS AND TECHNOLOGY 65 A. Physics Confidence 67 1. Plasma Preparation 67 2.
    [Show full text]
  • 2018 IEEE Thesaurus
    2018 IEEE Thesaurus Version 1.0 Created by The Institute of Electrical and Electronics Engineers (IEEE) 2018 IEEE Thesaurus The IEEE Thesaurus is a controlled The IEEE Thesaurus also provides a vocabulary of almost 10,100 descriptive conceptual map through the use of engineering, technical and scientific terms, semantic relationships such as broader as well as IEEE-specific society terms terms (BT), narrower terms (NT), 'used for' [referred to as “descriptors” or “preferred relationships (USE/UF), and related terms terms”] .* Each descriptor included in the (RT). These semantic relationships identify thesaurus represents a single concept or theoretical connections between terms. unit of thought. The descriptors are Italic text denotes Non-preferred terms. considered the preferred terms for use in Bold text is used for preferred headings. describing IEEE content. The scope of descriptors is based on the material presented in IEEE journals, conference Abbreviations used in the Thesaurus: papers, standards, and/or IEEE organizational material. A controlled BT - Broader term vocabulary is a specific terminology used in NT - Narrower term a consistent and controlled fashion that RT - Related term results in better information searching and USE- Use preferred term retrieval. UF - Used for Thesaurus construction is based on the ANSI/NISO Z39.19-2005(2010) standard, Guidelines for the Construction, Format, and Management of Monolingual Controlled Vocabulary. The Thesaurus vocabulary uses American-based spellings with cross references to British variant spellings. The scope and structure of the IEEE Thesaurus reflects the engineering and scientific disciplines that comprise the Societies, Councils, and Communities of the IEEE in *Refer to ANSI/NISO NISO Z39.19-2005 addition to the technologies IEEE serves.
    [Show full text]
  • Chapter 2 Incandescent Light Bulb
    Lamp Contents 1 Lamp (electrical component) 1 1.1 Types ................................................. 1 1.2 Uses other than illumination ...................................... 2 1.3 Lamp circuit symbols ......................................... 2 1.4 See also ................................................ 2 1.5 References ............................................... 2 2 Incandescent light bulb 3 2.1 History ................................................. 3 2.1.1 Early pre-commercial research ................................ 4 2.1.2 Commercialization ...................................... 5 2.2 Tungsten bulbs ............................................. 6 2.3 Efficacy, efficiency, and environmental impact ............................ 8 2.3.1 Cost of lighting ........................................ 9 2.3.2 Measures to ban use ...................................... 9 2.3.3 Efforts to improve efficiency ................................. 9 2.4 Construction .............................................. 10 2.4.1 Gas fill ............................................ 10 2.5 Manufacturing ............................................. 11 2.6 Filament ................................................ 12 2.6.1 Coiled coil filament ...................................... 12 2.6.2 Reducing filament evaporation ................................ 12 2.6.3 Bulb blackening ........................................ 13 2.6.4 Halogen lamps ........................................ 13 2.6.5 Incandescent arc lamps .................................... 14 2.7 Electrical
    [Show full text]
  • (19) United States (12) Patent Application Publication (10) Pub
    111111 1111111111111111111111111111111111111111111111111111111111111111111111111111 us 20200002828Al (19) United States (12) Patent Application Publication (10) Pub. No.: US 2020/0002828 At MILLS (43) Pub. Date: Jan. 2, 2020 (54) ELECTRICAL POWER GENERATION Publication Classification SYSTEMS AND METHODS REGARDING (51) Int. Cl. SAME e25B 13104 (2006.01) H05H 1124 (2006.01) (71) Applicant: BRILLIANT LIGHT POWER, INC., HOlL 3110725 (2006.01) Cranbury, NJ (US) HOlL 3110735 (2006.01) H02S 40132 (2006.01) (72) Inventor: RANDELL L. MILLS, CRANBURY, H02S 40138 (2006.01) NJ (US) H02S 40122 (2006.01) H02S 40142 (2006.01) (73) Assignee: BRILLIANT LIGHT POWER, INC., e25B 1104 (2006.01) CRANBURY, NJ (US) (52) U.S. Cl. CPC ............... e25B 13104 (2013.01); H05H 1124 (21) Appl. No.: 16/567,689 (2013.01); HOlL 3110725 (2013.01); HOlL 3110735 (2013.01); H05H 2277/13 (2013.01); (22) Filed: Sep. 11, 2019 H02S 40138 (2014.12); H02S 40122 (2014.12); H02S 40142 (2014.12); e25B 1104 (2013.01); Related U.S. Application Data H02S 40132 (2014.12) (63) Continuation of application No. 15/314,196, filed on (57) ABSTRACT Nov. 28, 2016, now Pat. No. 10,443,139, filed as A solid or liquid fuel to plasma to electricity power source application No. PCTlUS2015/033165 on May 29, that provides at least one of electrical and thermal power 2015. comprising (i) at least one reaction cell for the catalysis of (60) Provisional application No. 62/004,883, filed on May atomic hydrogen to form hydrinos, (ii) a chemical fuel 29, 2014, provisional application No. 62/012,193, mixture comprising at least two components chosen from: a source of H 0 catalyst or H 0 catalyst; a source of atomic filed on Jun.
    [Show full text]