DOCSLIB.ORG

Rutland™ Ink Standard Colors for Screen Printing Ink Rutland Screen Printing Ink Colors

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rutland™ Ink Standard Colors for Screen Printing Ink Rutland Screen Printing Ink Colors COLOR CARD RUTLAND™ INK STANDARD COLORS FOR SCREEN PRINTING INK RUTLAND SCREEN PRINTING INK COLORS Ready for Use Colors M3 Color Mixing System C3 Color Boosting Rutland low cure inks are non- The Rutland M3 non-phthalate Mixing System phthalate ready-for-use color finished ink color mixing system The Rutland non-phthalate color inks comprised of two barriers, is a collection of Pantone®-listed booster mixing system consists of one white ink, one black ink and colors used to create custom single pigment color concentrates 28 brilliant colors. The inks are formulations. This versatile that were developed as a means available in two series: EH high ink mixing system is ideal for of enhancing finished ink mixing opacity and EL low bleed. color matching and new color primaries to offer a darker, development. more saturated color. Rutland Standard Colors EL3399 EL2768 EL4769 EL3403 EL7574 NPT Forest Green NPT LB Bright Blue NPT LB Bright Gold NPT LB Dallas Green NPT LB Dark Brown EL2406 EL4202 EL5203 EL6399 EL6398 NPT LB Dark Navy NPT LB Gold NPT LB HO Bright Orange NPT LB HO Burgundy NPT LB HO Cardinal EL7003 EL0730 EL3401 EL1570 EL1212 NPT LB HO Peach NPT LB HO Grey NPT LB HO Lt Green NPT LB HO Purple NPT LB HO Team Violet EL7495 EL5159 EL4500 EL2589 EL2402 NPT LB HO Spice Brown NPT LB HO Team Orange NPT LB HO Vegas Gold NPT LB Lt Blue NPT LB Lt Navy EL6279 EL2449 EL2584 EL6400 EL2499 NPT LB Red NPT LB Lt Royal NPT LB Royal NPT LB Scarlet NPT LB Turquoise EL4611 EL4215 EL5202 NPT LB Yellow NPT LB Yellow RS NPT Lt Orange Rutland M3 and C3 Mixing System Colors 1440 2441 2442 2443 3443 Violet Blue #1 Blue #2 Marine Green 4449 6446 6447 1038 1018 Yellow Scarlet Red FF Fl Violet FL Magenta Rutland M3 and C3 Mixing System Colors 4042 6057 1017 1037 2065 FL Lemon FL Red FL Magenta FL Violet FL Blue 3033 4037 4041 5018 6055 FL Green FL Yellow FL Lemon FL Orange FL Pink USING THIS CHART This color selection chart is a tool to assist in selecting your requirements, Avient color experts can use your the proper screen printing ink for specific applications. color preference and materials involved to suggest an This chart represents a small fraction of the colors appropriate pigment for your specific applications. available. If these depicted are not an exact match for For more information about Rutland plastisol inks, visit rutlandinc.com. www.avient.com Copyright © 2020, Avient Corporation. Avient makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in the information. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner..
Load more

Recommended publications
  • Color Gamut of Halftone Reproduction*
    Color Gamut of Halftone Reproduction* Stefan Gustavson†‡ Department of Electrical Engineering, Linkøping University, S-581 83 Linkøping, Sweden Abstract tern then gets attenuated once more by the pattern of ink that resides on the surface, and the finally reflected light Color mixing by a halftoning process, as used for color is the result of these three effects combined: transmis- reproduction in graphic arts and most forms of digital sion through the ink film, diffused reflection from the hardcopy, is neither additive nor subtractive. Halftone substrate, and transmission through the ink film again. color reproduction with a given set of primary colors is The left-hand side of Fig. 2 shows an exploded view of heavily influenced not only by the colorimetric proper- the ink layer and the substrate, with the diffused reflected ties of the full-tone primaries, but also by effects such pattern shown on the substrate. The final viewed image as optical and physical dot gain and the halftone geom- is a view from the top of these two layers, as shown to etry. We demonstrate that such effects not only distort the right in Fig. 2. The dots do not really increase in the transfer characteristics of the process, but also have size, but they have a shadow around the edge that makes an impact on the size of the color gamut. In particular, a them appear larger, and the image is darker than what large dot gain, which is commonly regarded as an un- would have been the case without optical dot gain. wanted distortion, expands the color gamut quite con- siderably.
    [Show full text]
  • Color Mixing Ratios
    Colour Mixing: Ratios Color Theory with Tracy Moreau Learn more at DecoArt’s Art For Everyone Learning Center www.tracymoreau.net Primary Colours In painting, the three primary colours are yellow, red, and blue. These colors cannot be created by mixing other colours. They are called primary because all other colours are derived from them. Mixing Primary Colours Creates Secondary Colours If you combine two primary colours you get a secondary colour. For example, red and blue make violet, yellow and red make orange, and blue and yellow make green. If you mix all of the primary colours together you get black. The Mixing Ratio for Primary Colours To get orange, you mix the primary colours red and yellow. The mixing ratio of these two colours determines which shade of orange you will get after mixing. For example, if you use more red than yellow you will get a reddish-orange. If you add more yellow than red you will get a yellowish-orange. Experiment with the shades you have to see what you can create. Try out different combinations and mixing ratios and keep a written record of your results so that you can mix the colours again for future paintings. www.tracymoreau.net Tertiary Colours By mixing a primary and a secondary colour or two secondary colours you get a tertiary colour. Tertiary colours such as blue-lilac, yellow-green, green-blue, orange-yellow, red-orange, and violet-red are all created by combining a primary and a secondary colour. The Mixing Ratios of Light and Dark Colours If you want to darken a colour, you only need to add a small amount of black or another dark colour.
    [Show full text]
  • Color Mixing Challenge
    COLOR MIXING CHALLENGE Target age group: any age Purpose of activity: to experiment with paint and discover color combinations that will make many different shades of the basic colors Materials needed: copies of the pattern page printed onto heavy card stock paper, small paint brushes, paper towels, paper plates to use as palettes (or half-sheets of card stock), a bowl of water to rinse brushes, acrylic paints in these colors: red, blue, yellow, and white (NOTE: Try to purchase the most “true” colors you can-- a royal blue, a true red, a medium yellow.) Time needed to complete activity: about 30 minutes (not including set-up and clean-up time) How to prepare: Copy (or print out) a pattern page for each student. Give each student a paper plate containing a marble-sized blob of red, blue, yellow and white. (Have a few spare plates available in case they run out of mixing space on their fi rst plate.) Also provide a paper towel and a bowl of rinse water. If a student runs out of a particular color of paint, give them a dab more. This will avoid wasting a lot of paint. (If you let the students fi ll their own paints, they will undoubtedly waste a lot of paint. In my experience, students almost always over-estimate how much paint they need.) What to do: It’s up to you (the adult in charge) how much instruction to give ahead of time. You may want to discuss color theory quite a bit, or you may want to emphasize the experimental nature of this activity and let the students discover color combinations for themselves.
    [Show full text]
  • Computational RYB Color Model and Its Applications
    IIEEJ Transactions on Image Electronics and Visual Computing Vol.5 No.2 （2017） -- Special Issue on Application-Based Image Processing Technologies -- Computational RYB Color Model and its Applications Junichi SUGITA† (Member), Tokiichiro TAKAHASHI†† (Member) †Tokyo Healthcare University, ††Tokyo Denki University/UEI Research <Summary> The red-yellow-blue (RYB) color model is a subtractive model based on pigment color mixing and is widely used in art education. In the RYB color model, red, yellow, and blue are defined as the primary colors. In this study, we apply this model to computers by formulating a conversion between the red-green-blue (RGB) and RYB color spaces. In addition, we present a class of compositing methods in the RYB color space. Moreover, we prescribe the appropriate uses of these compo- siting methods in different situations. By using RYB color compositing, paint-like compositing can be easily achieved. We also verified the effectiveness of our proposed method by using several experiments and demonstrated its application on the basis of RYB color compositing. Keywords: RYB, RGB, CMY(K), color model, color space, color compositing man perception system and computer displays, most com- 1. Introduction puter applications use the red-green-blue (RGB) color mod- Most people have had the experience of creating an arbi- el3); however, this model is not comprehensible for many trary color by mixing different color pigments on a palette or people who not trained in the RGB color model because of a canvas. The red-yellow-blue (RYB) color model proposed its use of additive color mixing. As shown in Fig.
    [Show full text]
  • Subtractive Color Mixture Computation
    By Dennis Jarvis [CC BY-SA 2.0], via Wikimedia Commons (cropped) Subtractive Color Mixture Computation by Scott Allen Burns, Urbana, IL Published March 10, 2015; last updated May 3, 2015 Note: This is a PDF version of the web page http://scottburns.us/subtractive-color-mixture/ Overview I present an algorithm for computationally mixing screen colors (RGB colors) subtractively. The question it addresses is, "Given two colors specified by their RGB triplets, what RGB triplet should be used to represent the color that would arise if the two colors were mixed like paint colors, i.e., mixed subtractively?" The only way I can think of doing this in a rigorous way is to employ the math behind how a stimulus (a continuous spectral power distribution) enters our eyes and is transformed into a three-dimensional color sensation by our brain. Once this process has been adequately modeled, subtractive color mixture follows directly. The approach I present here is to convert the RGB colors to spectral reflectance curves, mix the curves using the weighted geometric mean, and then convert the result back to RGB. A Disclaimer The algorithm described here provides a representative model for subtractive color mixture. The way actual paints mix, for example, is highly dependent upon the particular pigments being used, as well as many other factors. Be aware that you can mix a blue and a yellow paint to get green in one case, and then mix another blue (that appears IDENTICAL to the first blue and has the same RGB value) and another yellow (appearing IDENTICAL to the first yellow, with the same RGB value) and get brown or some other color as a result! There is no way to differentiate between these two different outcomes based on the RGB values of the source colors.
    [Show full text]
  • Color Mixing…
    JUST PAINTPublished by Golden Artist Colors, Inc. / Issue 26 From Mark Golden Twenty-six issues of this technical newsletter and I am delighted to share we are still continuing the dialogue on color! After the success of Sarah Sands’ article on the ‘Subtleties of Color’ (JP 21), we recognized the value of continuing to provide more color resources for artists. The Tint & Glaze Poster was the first significant new tool for artists to come from this research. Following up on this work to create a printed color chart trying to represent real paint colors, Chris Farrell, our Creative Director and person in charge of putting together this chart, is our principle advocate that printing, no matter how carefully it’s done, cannot be a substitute Color for paint. In this issue, Chris shares the significant differences in ranges possible with commercial printing processes and Mixing… real paint. Our Director of the GOLDEN Certified You can’t get it unless you do it! Working Artist Program and author, Patti Brady, shares her painterly insights into a By Patti Brady promote them. However, each of new Modern Theory Color Mixing Set for I had been given what to me seemed these concepts, whether historical, artists, which takes just the opposite tact like the daunting task of writing contemporary or genre specific, create from Chris, in working with a limited set an article on color mixing and to a starting point that is extremely of colors to produce an enormous range of introduce the new Modern Theory helpful for the artist beginning to mixing colors.
    [Show full text]
  • Between Additive and Subtractive Color Mixings: Intermediate Mixing Models Lionel Simonot, Mathieu Hébert
    Between additive and subtractive color mixings: intermediate mixing models Lionel Simonot, Mathieu Hébert To cite this version: Lionel Simonot, Mathieu Hébert. Between additive and subtractive color mixings: intermediate mixing models. Journal of the Optical Society of America. A Optics, Image Science, and Vision, Optical Society of America, 2013, 31 (1), pp.58-66. 10.1364/JOSAA.31.000058. hal-00962256 HAL Id: hal-00962256 https://hal.archives-ouvertes.fr/hal-00962256 Submitted on 20 Sep 2014 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. 58 J. Opt. Soc. Am. A / Vol. 31, No. 1 / January 2014 L. Simonot and M. Hébert Between additive and subtractive color mixings: intermediate mixing models Lionel Simonot1,* and Mathieu Hébert2 1Institut Pprime, Université de Poitiers, CNRS UPR 3346, Département Physique et mécanique des matériaux, SP2MI, BP 30179, 86962 Chasseneuil, Futuroscope Cedex, France 2Université de Lyon, Université Jean Monnet de Saint-Etienne, CNRS UMR5516, Laboratoire Hubert Curien, F-42000 Saint-Etienne, France *Corresponding author: lionel.simonot@univ‑poitiers.fr Received July 18, 2013; revised October 16, 2013; accepted November 11, 2013; posted November 13, 2013 (Doc. ID 194145); published December 5, 2013 The color rendering of superposed coloring components is often an issue either to predict or to simulate the ap- pearance of colored surfaces.
    [Show full text]
  • 8.9 Mixing Colours.Pdf
    8.9 Mixing Colours Grade 8 Activity Plan 1 Reviews and Updates 2 8.9 Mixing Colours Objectives: 1. To demonstrate the properties of white light; it’s component colors and how they can be revealed. 2. To outline the differences between additive and subtractive colour mixing. 3. To understand the colour wheel and concepts associated with it such as complimentary colours etc. Keywords/concepts: rays, beams, pigment, pixels, visible light spectrum, Isaac Newton’s color wheel, additive and subtractive colour mixing, primary and secondary colours, complimentary colours, speed and wavelength of light. Curriculum outcomes: 209-2, 209-6, 210-11, 308-8, 308-9, 308-10. Take-home product: colour wheel 3 Segment Details African Proverb and “Before one has white hairs, one must first have them Cultural Relevance black.” Wolof, Senegal (5 min.) Ask probing questions on students’ knowledge of colours. Pre-test A little light on the psychology of colours is also (10 min.) appropriate. Explain the mixture of colours in white or colourless light. Use colour viewing box. Describe process of additive Background colour mixing. Demonstrate using torches and cellophane (10 min.) paper. Detail primary additive colours. Describe subtractive colour mixing. Demonstrate with paints. Detail primary subtractive colours. Describe how filters work using the colour viewing box. Activity 1 Also endeavour to illustrate the effect of filters on the (10 min.) colours of other objects around Activity 2 Using the prism and simulation link provided, demonstrate (15 min.) that white light is made up of other component colours. Activity 3 Using a painted or printed colour wheel, illustrate additive (20 min.) colour mixing.
    [Show full text]
  • LED Color Mixing: Basics and Background
    CLD-AP38 REV 1D TECHNICAL ARTICLE LED Color Mixing: Basics and Background TABLE OF CONTENTS INTRODUCTION Introduction ...................................................................................1 This application note explains aspects of the theory and practice The Need for Color Consistency in LED Illumination ..................2 of creating color-consistent, LED-based illumination products LED Binning ...................................................................................3 and shows how to use Cree XLamp® LEDs to achieve this end. Colorimetry and Binning Basics ...................................................3 LEDs, as with all manufactured products, have material and Color-Space Basics .................................................................4 process variations that yield products with corresponding Idealized Illumination Colors – the Black Body Curve ..........7 variation in performance. LEDs are binned and packaged to MacAdam Ellipses: The Variability of Perception, Expressed balance the nature of the manufacturing process with the in Color Space .........................................................................9 needs of the lighting industry. Lighting-class LEDs are driven Partitioning the Color Space – Binning ................................11 by application requirements and industry standards, including Chromaticity Bins ..................................................................13 color consistency and color and lumen maintenance. Just as Flux Bins .................................................................................14
    [Show full text]
  • Improving Image Quality in Multi-Channel Printing – Multilevel Halftoning, Color Separation and Graininess Characterization
    Linkoping¨ Studies in Science and Technology Dissertation No. 1840 Improving image quality in multi-channel printing – multilevel halftoning, color separation and graininess characterization Paula Zitinskiˇ El´ıas Division of Media and Information Technology Linkoping¨ University, Norrkoping,¨ Sweden Norrkoping,¨ 2017 Improving image quality in multi-channel printing – multilevel halftoning, color separation and graininess characterization Copyright © Paula Zitinskiˇ El´ıas Division of Media and Information Technology Campus Norrkoping,¨ Linkoping¨ University Norrkoping,¨ Sweden ISBN: 978-91-7685-558-4 ISSN: 0345-7524 Printed in Sweden by LiU-Tryck, Linkoping,¨ 2017 Abstract Color printing is traditionally achieved by separating an input image into four channels (CMYK) and binarizing them using halftoning algorithms, in order to designate the locations of ink droplet placement. Multi-channel printing means a reproduction that employs additional inks other than these four in order to augment the color gamut (scope of reproducible colors) and reduce undesirable ink droplet visibility, so-called graininess. One aim of this dissertation has been to characterize a print setup in which both the primary inks CMYK and their light versions are used. The presented approach groups the inks, forming subsets, each rep- resenting a channel that is reproduced with multiple inks. To halftone the separated channels in the present methodology, a specific multilevel halftoning algorithm is employed, halftoning each channel to multiple lev- els. This algorithm performs the binarization from the ink subsets to each separate colorant. Consequently, the print characterization complexity remains unaltered when employing the light inks, avoiding the normal in- crease in computational complexity, the one-to-many mapping problem and the increase in the number of training samples.
    [Show full text]
  • Color Mixing
    1) The human eye mainly senses Red, Green and Blue, and the brain interprets combinations of these into all the colors we see. We can use Red/Green/Blue alone to reproduce any color. 2) Printing/Dyes use Cyan/Magenta/Yellow because these subtract only Red/Green/Blue, respectively. We can thus use C/M/Y to reproduce any color via subtractive color mixing. Background – for Leaders For detailed info, see “Quick Bites” at end of this doc Retina • The human eye is primarily responsive to Red, Green and Blue light. Green Cone • We can control just Red/Green/Blue lightEyeball to trick the brain into seeing any color. Red • Main Question being posed/answered by the activityLight: Cone How do printers and dyes use Cyan/Magenta/Yellow/Black (CMYK) Blue inks to reproduce every color? Cone • Cyan/Magenta/Yellow each subtract only Red/Green/Blue, respectively. • CMYK can be mixed to choose how much R/G/B reaches the eye, thus reproducing any color. Retina “Green” receptors Green Cone Eyeball “Blue” receptors “Red” receptors Red Light Cone Blue Cone ”Yellow” The eye has three types of color-sensors: red, green and blue. Each actually senses a range of colors → “Pure” Colors of the Rainbow “Green” receptors The brain interprets different ratios of Red/Green/Blue as each color in the rainbow. “Blue” receptors “Red” receptors 1 ”Yellow” “Pure” Colors of the Rainbow Intro + Rainbow (5 min) Rainbow Demo • Transparent container of water • Compact mirror • White wall or board • Turn off lights • Here’s an easy way to make a rainbow at home.
    [Show full text]
  • Color Mixing Is a Complicated Topic, Especially in Weaving. in This Course
    Color mixing is a complicated topic, especially in weaving. In this course, I'm going to focus on giving you some basic concepts of color mixing and then give you tools to experiment with it on your own. A brief recap of color mixing from the hues section. Primary colors are pure colors. They cannot be created by mixing other colors together. The primary colors for weaving are yellow, magenta, and cyan, also known as turquoise. Mixing two primary colors in equal proportions gives you a secondary color. The secondary colors are orange, green, and purple, and they fall between your primary colors on the color wheel. Here's how this works in weaving. These two yarns, magenta and yellow, are primary colors. They weave into an orange plain weave fabric. Mixing a primary and secondary color gives you a tertiary color. There are six tertiary colors, and they fall between the primary and secondary colors on the color wheel. Here's how this plays out in weaving. A green yarn and a yellow yarn blend to make a yellow-green plain weave fabric. Mixing two primary colors produces an equally bright color somewhere between those two colors on the color wheel. In theory, mixing all three primaries in equal amounts should produce gray. It's not usually that neat, but in general, adding a third primary to the mix does dull the color, introducing some gray. So if you want to keep your colors bright, mix only colors that fall between two primaries on the color wheel. Another way of looking at it is that colors that fall between two primaries will mix into equally bright colors.
    [Show full text]