09/05/08 Copyright © 1998-2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. 0Series 80 Aesthetics Simplicity Security plctos nweeteei edfracenevrnet(hospitals, environment clean a for need is there Anywhere Applications: NSF and • EPA is compound antimicrobial Agion The safe. completely and Non-toxic • fungus, algae, bacteria, of growth the suppresses permanently coating MicroShield touch Series • 80 the within integrated available now is protection MicroShield The • hsrvltoayfns otn vial nalSRETpoutlns tlzsa utilizes lines, product SARGENT all on available coating finish revolutionary This • eie rvd h etcmiaino ipiiy tegh uaiiy eteisadinvto n r efc o plctosi omriloffice commercial These in doors. applications stile for narrow perfect and are standard and both innovation for and devices institutions. aesthetics mortise educational durability, and and strength, rim simplicity, medical rod, of buildings, vertical combination including best devices the exit provide of devices line full a manufactures SARGENT atrkyn ihSRETScrt e ytm available systems Key Security SARGENT with keying Master • options trim Anti-vandal • osa eisadSui olcinLvr dsatuho elegance of touch a adds Levers Collection Studio and Series Coastal • BHMA/ANSI with consistent finishes hardware architectural “True” design • pleasing aesthetically simple, Clean, • door from device removing without accomplished is Rekeying • construction Modular wear less • – parts moving Few • design Maintenance-free • installation! Easy • re-leeetouiecn ih rvds3t ie h visibility the times 5 to 3 provides light electroluminescent Green-blue • lighting electroluminescent FLATLITE state-of-the-art utilizes SARGuide • exit of visibility increases device exit illuminated SARGuide The • Torx • available functions cylinder Double • aoaois col,mdclcnes acr,fo rcsigetc.) processing food daycare, centers, medical schools, laboratories, equipment preparation food and medical in use for listed FDA and approved bacteria of spectrum broad a against effective is It finish mildew. the and of mold life the for lasts MicroShield coating. finish the as well as pad ivrbsdatmcoilcmon rmAgion from compound antimicrobial silver-based V1,Sgaue eoF,Ks n XC) and Keso F1, Keso Signature, (V-10, standards fohrlights other of Inc. Technologies E-Lite from lighting existing egress supplementing for passages, codes smoke-filled or dark in locations 2 ® n pne screws spanner and -0-2-47•www.sargentlock.com • 1-800-727-5477 Microshield ™ Coating ® Technologies Features Devices Exit Series 80 Innovation Durability & Strength e ae 6&5 o nomto nteT-&P-offerings PL- & TL- the on information for 57 & 56 pages devices See exit devices electro-mechanical, exit many (UL10C) • and fire-rated mechanical, and with 305) Available (UL panic on • use for Listed UL the • to directly users guides signage “EXIT” Integral operation. Intuitive code by required • signs exit extended building an Supplements provide to • door a on enough low placed are system alarm devices fire Exit by activation or operation • continuous for wired be Can • T Cne n o acig etclRdDvcsofrls bottom less offer Devices Rod Vertical Latching) Top and (Center CTL • • • most the for solutions electro-mechanical of offering Broad • that device exit generation next a Beacon™, introduces SARGENT • factory Consult * warranty Year 5 local • other and Protocols County Dade meet to options Available conditions • abusive withstand to Built • construction mounting duty Heavy materials • component finest of Made • en fegress of means egress emergency safe for opportunity of window o ovnec ihtu etrlthn o de security added for latching center true with convenience rod building passages public any smoke-filled of or safety dark the improve in effectively locations and exit of visibility the enhance SARGuide protection of MicroShield applications control access/egress demanding device effective. exit and the – into unique built Beacon alerts makes The visible emergency. and an audible during of safety combination to pathway clearer a creates impact* missile and load wind requirements high hurricane code for go sargsee rdmr fAinTcnlge,Ic,Wkfed A USA MA, Wakefield, Inc., Technologies, Agion of trademark registered of a copy is request. A Agion upon antimicrobial. available Agion is the warranty of Agion efficacy the the to as of warranties, implied, free or or be representations express will no surfaces makes ABLOY the ASSA insure microbes. to hygiene. destructive cleaned good be for still substitute must a products as Coated intended not is antimicrobial Agion The SAALYGopcmaisofrteMicroShield customers, the their offer to companies solutions Group innovative ABLOY provide ASSA to promise their of part As MicroShield niirba otn eindt tmtesra fgrsadbacteria. and MicroShield germs of spread the stem to designed coating antimicrobial ™ xtdvc otisa lcrlmnsettuha to touchpad electroluminescent an contains device exit ™ nimcoilfns otn fesanwlevel new a offers coating finish anti-microbial TM sataeako aeScrt n. nAS BO ru company. Group ABLOY ASSA an Inc., Security Yale of trademark a is ™ TM ehooy silver-based a technology, aiu orOeigFr Doors Opening-Fire Door Maximum 0Series 80 CVR/Mortise CVR SVR/Mortise SVR Mortise Lock Rim Type 12-NB-WD8600 12-NB-MD8400 12-NB-MD8600 2P80 & 12-PP8600 & 12-PP8600 & 12-PP8700 & 12-PP8700 2L80 & 12-LP8600 12-WD8600 12-MD8400 12-MD8600 xtDevice Exit 2 PR8600 12- 12-FM8700 12-NB8700 12-NB8700 12-PR8600 12-PR8700 12-PR8700 12-LR8600 12-SP8600 12-SP8600 12-SP8700 12-SP8700 12-LS8600 12-8700 12-8700 12-8300 12-8300 12-8900 12-8900 12-8800 12-8800 Material Wood Wood Wood Wood Wood Wood Wood Wood Wood Wood Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Door 0Mn4 10' x 4' Min 90 or4 10' x 4' Hour 3 10' x 4' Hour 3 10' x 4' Hour 3 10' x 4' Hour 3 10' x 4' Hour 3 10' x 4' Hour 3 or4 10' x 4' Hour 3 10' x 4' Hour 3 5Mn4 9' x 4' Min 45 9' x 4' Min 90 igeDoor Single or4 7' x 4' Hour 3 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 2H90or 12-HC980 or8 8' x 8' Hour 3 12-HCL980 2L8 or 12-L980 or8 8' x 8' Hour 3 290or 12-980 Mullion with –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– pnnsSizes Openings and Ratings Door Fire UL Devices Exit Series 80 or8 10' x 8' Hour 3 or8 10' x 8' Hour 3 12-HD980 Mullion with –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– or Swing Doors or8 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 or8 8' x 8' Hour 3 8' x 8' Hour 3 0Mn8 8' x 8' Min 90 9' x 8' Min 90 9' x 8' Min 90 or8 8' x 8' Hour 3 8' x 8' Hour 3 8' x 8' Hour 3 7' x 6' Hour 3 Direction obeDo Applications Door Double VR/VR Same –– –– –– –– –– –– –– –– –– –– –– -0-2-47•www.sargentlock.com • 1-800-727-5477 or Swing Doors SVR/Mortise or8 8' x 8' Hour 3 8' x 8' Hour 3 or8 8' x 8' Hour 3 8' x 8' Hour 3 Direction Same –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– wn Same Swing CVR/Mortise or8 10' x 8' Hour 3 10' x 8' Hour 3 or8 10' x 8' Hour 3 10' x 8' Hour 3 DDoors MD Direction –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– wn Same Swing CVR/Mortise DDoors WD or8 9' x 8' Hour 3 9' x 8' Hour 3 or8 9' x 8' Hour 3 Direction –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– obeEgress Double or8 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 10' x 8' Hour 3 or8 8' x 8' Hour 3 5Mn8 8' x 8' Min 45 or8 9' x 8' Hour 3 9' x 8' Hour 3 8' x 8' Hour 3 8' x 8' Hour 3 8' x 8' Hour 3 8' x 8' Hour 3 VR/VR 3 –– –– –– –– –– –– –– –– –– –– ––

09/05/08 Copyright © 1998-2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. 09/05/08 Copyright © 1998-2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. hm r /"frattlhih f1/4" of height total a for 1/8" are Shims Shims Cap End Two • and Shims Chassis Two • 8500 for Kits Shim 668 Series 80 pcfctosfr80 eisExit Series 8500 for Specifications iihdFloor Finished eieCneln from Centerline Device etrCs iesos851"(1m)x111"(27mm) 1-1/16" x (211mm) 8-5/16" Projection Dimensions Case Center Bolt Latch Options Electric Feature Dogging Types Door ieEi Hardware Exit Fire screws machine and wood with standard Supplied Fasteners Mounting Strike Widths Door 26 -0-2-47•www.sargentlock.com • 1-800-727-5477 SCREW THRU-BOLT WITH arwDsg i xtDevice Exit Rim Design Narrow Series 8500 S PROVIDED 2REQ'D) (2 SHIMS 1 14 m o tnadApplications Standard for mm) (1041 41” uha eta "(7mm) (77 3" – Neutral Pushbar 60 Page - Electromagnet 61 with Page conjunction - in Dogging used Electric be 58- to Exit 58 Egress Page Delay - 57- Retraction 57 Latch Page Remote - ELR Monitoring 56- Rail - Signal 62 Request-to-Exit Page 55- - Monitoring 57 Lever Page Outside - 54- Switch Monitor Latchbolt 57 LX Page 53- 56 - Touchpad Page Illuminated - SARGuide Rail TL- Push Coated Photoluminescent 55 SARGuide Page PL- - Device 56 Exit Page Beacon™ BT- - Device Exit Alarmed AL- prefix 31- as order and thickness specify thick, 2-1/4" to 1-3/4" thickness. over minimum doors mm) For (44 1-3/4" metal or Wood uha erse -/"(4mm) (54 2-1/8" – Depressed Pushbar nuts (sex) mortise and through-bolts with Available 61 Page - Device Egress Delayed contained Self – Electroguard 59- Mullion 650A with Standard 658 door 649, 48" – for Strikes required Optional Coated cutting door Nylon No 42" Black 122cm) for Standard to required 657 (110cm cutting door 48" No 36" to 107cm) for 43" to required - (94cm cutting door Rail 42" No 32" G to 91cm) for 37" to required - (84cm cutting Rail 36" No J to 81cm) 33" to - (61cm Rail 32" F to 24" - Rail E stile minimum (114mm) 1-3/4" tils te,34 1m)throw (19mm) 3/4" steel, Stainless (16-) available Dogging Cylinder standard; dogging key Hex o Available Not NARRO W TL HSI ASSEMBLY CHASSIS STILE 50Nro einRmEi Device Exit Rim Design Narrow 8500 2REQ'D) (2 SHIMS END CAP BRAC MOUNTING KET eindfrnro tl applications stile narrow for Designed • Features 8500 eie r NIA5. 01Gae1 Grade 2001 – A156.3 ANSI are Devices • security solid and operation Quiet • device latching rim point Single • mullion with doors double and Single • 5 tieatraiefr8500 for alternative Strike 658 5 tnadSrk o 8500 for Strike Standard 657 eg,auiu rm ulgasdoors) glass full frame aluminum (e.g., ai listed Panic lc yo coated nylon Black • with frames on use For • applied Surface • lc yo coated nylon Black • for separately ordered be Can • with standard Packed • nerlstop integral or stop blade mortised or oframes to application surface mullion 650A 80 Series Prefixes, Descriptions and Rail Sizes

Cylinder Notes: Prefixes Available Cover Dimensions and

• 16- Cylinder Dogging uses a 41 inside 10 Signature System Touchbar Projections cylinder with 97 ring 10-UL Signature, meets UL437 cylinder Narrow Wide • Removable core and 70 prefix cylinders +11 SARGENT XC Key System require a 97-0351 cylinder rings for 700 12 UL Fire Label Exit Devices 14 Sliding bolt bottom case for 8700 Series ET Controls and 94-0153 ring for 100 & 3" ++16 Cylinder lockdown feature (76mm) 300 Series Aux controls 19 Pushbar without Lexan touchpad 8-3/8" • Less cylinder - SARGENT supplies standard 21 Construction Keying Conventional, XC 8-5/16" 2-5/16" (213mm) blocking rings. Specify if using competitor and Signature Series (211mm) (59mm) 22 Construction Keying Conventional cylinders Cylinders (Existing Systems Only) • When ordering BEST cylinders for use in 23 ANSI flat lip strike (8300, 8900, SARGENT Exit Devices, use the following BEST including 12- Prefix) *31 Doors over 1-3/4" and/or Panels product numbers: 1-7/16" 36 6 Lobe security head screws 1-1/16" 2-5/8" (27mm) (37mm) (67mm) Mortise cylinder: 1-E74XC208 37 Spanner head screws Rim cylinder: 1ESPL-7-AO5994 43 Flush End Cap *53 Latchbolt monitoring switch 54 Internal micro switch in ET Control Notes For Prefixes 55 Signal Switch in Rail (Request to Exit) • 31- Specify door thickness and specify panel 56 RemoteDogging/LatchRetraction 56-HK Remote Latch Retraction with manual Hex thickness and location, if used Key dogging • 31- prefix not available, HC8700, FM8700, 57 Delayed Egress (Magnet ordered separately) PP, PR & SP8700, PP, PR & SP8600, LP, LR & 58 Electric Dogging ® LP8700, **59 Electroguard Self Contained Delayed Egress Device 3" • 31- Prefix requires extended lip strike for **BC59 Electroguard Boca Code (Door Status Switch (77mm) 2-1/8" 8300 & 8900 Series (supplied). required) (54mm) 60 Disposable Construction Core • SC- Prefix not available in 57- Prefix, 63 SARGENT Removable Core cyl. Includes Neutral Depressed (SC- Cylinders are only available in 41 length masterkeying, grand masterkeying cylinders and Rim cylinders) 64 SARGENT Removable Construction Core cylinder Rail Sizes • SC-, SE- & VC- Prefixes not available with the 65-73 6 Pin Uncombinated Small Format following: 8904, 8916, 8944, 8975, 8976, Interchangeable Cores SARGENT offers four sizes of rails to 8866, 8304, 8344, 8375 & 8376 (SC- & SE- 65-73-7P 7 Pin Uncombinated Small Format accommodate 32", 36", 42" and 48" doors. Interchangeable Type Cores These rails can be cut for smaller doors as #41 cylinders only & VC- #42 cylinders only) 70 Exit device to accept Small Format specified in the chart below. + 11- Prefix not available with 10-, 10-UL-, 22-, Interchangeable Cores - no core provided 72 Exit device to accept Small Format SARGENT will cut all rails to size if door width is 60-, 63-, 64- SE, SC, 82-, F1-82-, 82-, F1-83- & Interchangeable Cores with Construction 84- prefixes. Core provided specified when the hardware is ordered. 73 Small Format 6-Pin interchangeable core ++16- Prefix not available with 12-, 57, 59- or (refer to CK-8 for available keyways) AL- prefix 73-7P Small Format 7-pin interchangeable core, Stock Door * 53- Not available on PP/PR/SP8600 & (refer to CK-8 for available keyways) Size Widths Remarks LP/LR/LS8600 Exit Devices 75 Warning inside, strip on rail 76 Knurled Outside Lever E 24" to 32" No cutting required ** 59- & BC59- are not available with 16-, 55-, 77 Warning inside and outside, abrasive strip (61cm to 81cm) for 32"(81cm) door 56-, 57-, 58- prefixes and on NB8700, on rail, abrasive coating on Lever F 33"to 36" No cutting required PP/PR/SP8600 & LP/LR/LS8600 Exit Devices 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided (84cm to 91cm) for 36" (91cm) door *** BT- Not available FM8700 Devices & theses F1-82 Keso Security Cylinder with Front J 37" to 42" No cutting required prefixes 16-, 56-, 57-, 59-, BC59- and AL Profile (Patent Pending) 82 Keso Security Cylinder (94cm to 107cm) for 42" (107cm) door F1-83 Keso Security Removable Core Cylinder G 43" to 48" No cutting required Suffix with Front Profile (Patent Pending) 83 Keso Security RemovableCore Cylinder (110cmto122cm) for 48" (122cm) door CPC Clear Powder Coat – Recommended for 84 Keso Security Removable Construction exit devices used in full exterior application and Core Cylinder highly corrosive areas with 32 and 32D finishes. AL Alarmed Exit LP, LR & LS8600 Rail Sizes How to order: 8313F x ETL x 32D x CPC BR Bump Resistant Cylinder (Available with Conventional & XC Cylinders Only) L Rail 36" (91cm) No cutting ***BT Beacon- Emergency Audio & Visual egress system with a self contained Laser, Flashing required LEDs & Audio alert M Rail 42" to 44" No cutting GL Guarded Latchbolt for 8800 (107cm to 112cm) required NB No Bottom Rod (Not available with 59- & BC59- ) N Rail 46" to 48" No cutting PL SARGuide™ PL – Photoluminescent Coated (117cm to 122cm) required Push Rail – (Touchpad eliminated) SC, SE Exit Device furnished in Schlage C or E Keyway (specify) SG MicroShield - Antimicrobial clear powder coat TL SARGuide Illuminated touchpad Note: For additional information on Electrified

VA, VC, SARGENT V-10 Cylinders Exit Devices, see the Electrified Exit Device Copyright © 1998-2008, Sargent Manufacturing Company, an ASSAReproduction ABLOY in Group whole company. or All in rights part reserved. without the express written permission of Sargent Manufacturing Company is prohibited. VS, VC, VS See V-10 Cylinder Section catalog at www.sargentlock.com

1-800-727-5477 • www.sargentlock.com 63 09/05/08 80 Series How to Order How to Order Exit Devices

12- 89 75 F ETMR 12VDV RHR 32D 36" 84" 41" Hand Door Opening Prefixes Device Type Function Rail Size Trim Voltage Finish AFF Finish Width Height 04 - Night For ET 89 - Mortise E 24"-32" 12VDC RHR Latch trim Available If door Required Center Finishes width for Line of Available 06 - Night specify ET WS89 - Mortise F 33"-36" 24VDC LHR page 65 is Vertical Rail Prefixes latch followed Listing by Lever supplied Rod Exit Above 88 - Rim 10 - Dummy J 37"-42" Page 63 design, rails Devices Finish 13 - Voltage will be Floor 41" HC88 - Rim G 43"-48" See pages Classroom 46-48 required cut to Standard for size WS88 - Rim 15 - Passage Solenoid Rail Sizes 16 - For Controlled 87 - SVR Listed Below Entrance Thumb Functions - are for LP, LR 28 - TP Piece 70, 71, NB87 - SVR & LS Devices Passage Trims and 73, 74, 75 Only 40 - Pulls & 76 Legend HC87 - SVR FW Dummy specify Trim AFF - Above Finish Floor MD - Metal Door 43 - FW Designation CTL - Center & Top Latching Exit NB - No Bottom Rod FM87 - SVR L 36" Door Classroom as specified CVR - Concealed Vertical Rod SVR - Surface Vertical Rod 44 - FW by Device ET - SARGENT External Lever Trim TP - Thumb Piece Trim MD86 - CVR M 42"-44" Night Latch Type FM - FEMA WD - Wood Door 46 - FW FW - Freewheeling Trim WS - Windstorm NB-MD86 - CVR N 46"-48" Night Latch HC - Hurricane Code 62 - TP WD86 - CVR Night Latch 63 - TP Mounting Heights NB-WD86 - CVR Classroom • 41" (1041mm) from finished floor for 1/8" 66 - TP (3mm) 85 - Rim Narrow standard application Entrance • 38" (965mm) from finished floor for 70 - elementary schools and to meet local Solenoid 84 - CVR Narrow accessibility standards when a 100 or 300 Fail Safe Series Auxiliary Control is used (38" AFF Stop w/Cyl must be specified) Height 71 - NB-84 - CVR Solenoid Hand

Narrow Fail Secure Door w/Cyl 1/4" (6mm)

73 - Inside Door Opening Height 83 - Mortise Solenoid Narrow Fail Safe

74 - Left Hand Right Hand Finished Floor PP87 - CTL SVR Solenoid Reverse Reverse “RHR” Fail Secure “LHR” 75 - Outside Solenoid PR87 - CTL SVR Fail Safe w/Cyl 76 - How to order 700 Series ET Trim Solenoid SP87 - CTL SVR Specify Function, Suffix, Lever, Finish and Handing (e.g., 713-8 ETL x 26D x RHR) Fail Secure w/Cyl Note: Suffix requirements are based on the type of exit device being used: PP86 - CTL CVR • 700-8 is for 8800, 8500, NB8700, PP, PR & SP8700 devices, except with these functions: 04, 10, 16, 40 & 44 PR86 - CTL CVR • 700-6 is for all PP, PR, SP, LP, LR & LS8600 devices SP86 - CTL CVR • 700-4 is for all WD & MD 8600 and 8400 devices LP86 - CTL CVR • 700 with No Suffix for all 8900, 8300, 8700 with bottom rod and also for 8800, LR86 - CTL CVR 8500, NB8700, PP, PR & SP8700 devices with 04, 10, 16, 40 & 44 functions LS86 - CTL CVR Copyright © 1998-2008, Sargent Manufacturing Company, an ASSAReproduction ABLOY in Group whole company. or All in rights part reserved. without the express written permission of Sargent Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com 09/05/08 64 Architectural Specifications, 80 Series Finishes and Finish Care

2.01 EXIT DEVICES A. Exit devices shall be 80 Series push rail devices as manufactured by SARGENT Manufacturing Company, New Haven, CT. B. Exit devices shall be certified to meet or exceed the requirements of ANSI/BHMA A156.3 Grade 1. C. Exit devices shall be listed by Underwriters Laboratories for panic and bear the UL label for life safety in full compliance with NFPA 80 and NFPA 101. Exit devices for fire labeled doors shall be UL listed as “Fire Exit Hardware”. D. Provide standard hex key dogging on non fire-rated exit devices, with cylinder dogging (i.e., SARGENT 16- prefix) as an option. E. Exit devices shall comply with UL10C and UBC 7-2 positive pressure requirements. F. Construction: 1. Chassis shall be of heavy duty cast design with one piece drawn nonferrous removable covers matching the material of the push and mounting rails. 2. Stamped steel chassis are not acceptable. 3. Mounting rails shall be formed from a solid single piece of stainless steel, brass or bronze no less than 0.072 inches thick. 4. Push rails shall be constructed of 0.062 inch thick material in the same manner as the mounting rail. Painted or anodized aluminum shall not be considered heavy duty and are not acceptable. 5. Provide protective Lexan touchpad on the exit device push rail to prevent scratches and serve as a visible guide to the user. 6. Metal end caps shall be formed from the same base metal as the push and mounting rails. G. Exit devices shall have a maximum of 3 inches projection from the face of the door in the non-dogged position. When in the dogged position, the device shall have no more than a 2-1/8 inch projection from the door face. H. The design of the exit device shall eliminate the necessity of removing the device from the door for standard maintenance or keying changes. I. The device chassis shall be mounted and operable without the need of the rail or the chassis cover. J. Trim shall be through-bolted. K. Devices shall be available with matching trim for both wide and narrow stile doors, including electrified functions when required. L. Exit device operating lever trim shall withstand 1000 inch pounds of torque without allowing access. M. Lever trim shall be available in architectural finishes and designs to match that of the locksets specified. N. Exit devices shall have a five year limited warranty. The following guidelines should be referenced regularly and as required for proper appearance and longevity of finish.

Finish SARGENT# BHMA# Description How to clean Avoid these cleaners

3 605 Bright brass, clear powder coat

4 606 Dull brass, clear powder coat Mild non-abrasive detergent Abrasive cleaners, bleach solvents, with damp cloth or sponge steel or bronze wool 9 611 Bright bronze

10 612 Dull bronze, clear powder coat

Abrasive cleaners, bleach solvents, 10B 613 Antique bronze, oiled Lemon oil polished with dry cloth steel or bronze wool

10BL – Oxidized satin bronze-lacquered

15 619 Satin nickel plate

20D – Statuary bronze, dark Mild non-abrasive detergent Abrasive cleaners, bleach solvents, with damp cloth or sponge steel or bronze wool 26 625 Bright chrome

26D 626 Dull chrome

32 628 Bright stainless steel

32D 630 *Dull stainless steel Plastic pad or bronze wool Cleaners, solvents, bleach,

*To avoid discoloration and pitting: • Keep stainless steel away from contact with other metals • Avoid cleaning with mineral acids or chlorine products • Avoid cleaning with abrasive products like or steel wool To maintain the finish: • Remove any contamination before damage occurs • Protect with a metal polish or car wax

CPC – Clear Powder Coat For use in pool areas, offshore applications and highly corrosive applications, the clear powder coat eliminates need for cleaning and maintenance of All rightsCopyright © reserved. Group company. ABLOY an ASSA Manufacturing Company, 1998-2008, Sargent Reproduction in whole or part without the express written Manufacturing Company is prohibited. permission of Sargent finish. Applied over 32D only.

1-800-727-5477 • www.sargentlock.com 65 09/05/08