DOCSLIB.ORG

Hand Saw Expert Fx

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hand Saw Expert Fx HAND SAW EXPERT FX Available with two types of double-ground toothings. Universal toothing (U7) for both cross-cutting and rip cutting. Ideal as an all-purpose saw. Alternatively with straight toothing (R7) for fast cross-cutting. L H Artikelkod T 319H22R7FX 22 550 mm 10x 7 t.p.i 0,52 7392746460280 HAND SAW PREMIUM ! TOOLBOX SAW 15 inch, R13 toothing for dry wood, medium cutting. Supplied with a 2-component plastic handle. L H Artikelkod T 275H15 15 380 mm 10x R13 0,47 7392746460303 HAND SAW PREMIUM ! PLASTIC Ideal for cutting pvc pipes and other plastic material. L H Artikelkod T 152H2011 20 500 mm 10x 11 t.p.i. 0,35 7392746453121 HAND SAW PREMIUM ! INSULATION SAW Insulation saw for sawing insulation material, mineral wool. Wave formed edge. Hardpoint finish L H Artikelkod T 255H22WA 22 550 mm 10x - 0,4 7392746460464 HAND SAW PREMIUM ! VENEER SAW Veneer saw for sawing of plywood, veneer etc. Extra thin and wide blade for accurate cut. Hardpoint blade with curved, toothed front-end. Straight toothing 13 teeth/inch L H Artikelkod T 158H 12,5 320 mm 10x 10 t.p.i 0,74 7392746420062 HAND SAW PREMIUM ! TENON SAW Tenon saw with very fine toothing for use in mitre boxes and for other precision jobs. Extra thin and wide blade for an accurate cut. Aluminium alloyed back and our comfortable plastic handle. Straight toothing 13 teeth/inch. Hardpoint finish. L H Artikelkod T 153H12 12 300 mm 10x 10 t.p.i 0,39 7392746453145 153H14 14 350 mm 10x 10 t.p.i 0,32 7392746458126 HAND SAW CONCRETE FX Special saw for cellular blocks and lightweight materials. Coarse, hardpoint teeth. Supplied with our soft grip handle for comfor- table and safe grip. L H Artikelkod T 167H 28 710 mm 5x - 0,86 7392746420079 168TS 28 710 mm 5x - 0,52 7392746460334 HAND SAW EXCLUSIVE FX L H Artikelkod T 327H22FX 22 550 mm 10x 9 t.p.i. 0,45 7392746420093 HAND SAW CLASSIC A classic, traditional hand saw which we offer in many different variations from 16 up to 24 inch length with tooth shapes R7 and U7. For rough and heavy-duty cross cutting we also offer this model in 20 and 24 inch length with tooth shape R3,5, and 20, 22 inch with the tooth shape R5. The classic saws are supplied with a comfortable plastic handle with 3 screws. Supplied in hard- point finish for all models, except for toothing R3,5 which is supplied non hardpoint. L H Artikelkod T 32820R35 20 500 mm 10x 3,5 t.p.i. 0,46 7392746420109 32824R35 24 600 mm 10x 3,5 t.p.i. 0,38 7392746427023 328H16R7 16 400 mm 10x 7 t.p.i 0,38 7392746427023 328H16U7 16 400 mm 10x 7 t.p.i 0,38 7392746427030 328H18R7 18 450 mm 10x 7 t.p.i 0,38 7392746427184 328H18U7 18 450 mm 10x 7 t.p.i 0,41 7392746427047 328H20R7 20 500 mm 10x 7 t.p.i 0,41 7392746427207 328H20U7 20 500 mm 10x 7 t.p.i 0,52 7392746420055 328H22R5 22 550 mm 10x 5 t.p.i. 0,52 7392746427238 328H22R7 22 550 mm 10x 7 t.p.i 0,52 7392746427221 328H22U7 22 550 mm 10x 7 t.p.i 0,47 7392746427214 328H24U7 24 600 mm 10x 7 t.p.i 0,52 7392746460259 328J328 16 400 mm 10x 7 t.p.i 0,38 7392746427160 HAND SAW EXCEL FX A fine toothed hand saw with 11 razor sharp teeth per inch. Low-friction coating. The special 3-edge toothing and setting offers excellent cutting properties. L H Artikelkod T 329H22FX 22 550 mm 10x 11 t.p.i. 0,42 7392746460273 HAND SAW EXACT FX Special saw for fine carpentry and cabinet making. Fine-toothed with 11 razor sharp teeth with 3 cutting edges. L H Artikelkod T 352H18FX 18 450 mm 10x 11 t.p.i. 0,2 7392746490010 HAND SAW PREMIUM ! RAPID A traditional hand saw, but with the same super toothing (JP) as our black saw, i.e. with 3 cutting edges and our special setting. Available with two types of toothings, 11 teeth per inch and 9 teeth per inch. L H Artikelkod T 229H1611JP 16 400 mm 10x 11 t.p.i 0,47 7392746490119 229H169JP 20 500 mm 10x 9 t.p.i. 0,47 7392746000042 229H2011JP 20 500 mm 10x 11 t.p.i 0,47 7392746000035 229H209JP 22 550 mm 10x 9 t.p.i. 0,52 7392746460310 229H2211JP 22 550 mm 10x 11 t.p.i 0,52 7392746000028 229H229JP 10x 9 t.p.i. 0,42 7392746460327 HAND SAW PREMIUM ! LAMINATE Special saw for cutting wood and laminate floors. With our double ground universal toothing. L H Artikelkod T 252H18 18 450 mm 10x 7 t.p.i 0,38 7392746460501 HAND SAW PREMIUM ! ALLROUNDER Available with two types of double-ground toothings. Universal toothing (U7) for both cross-cutting and rip cutting. Ideal as an all-purpose saw. Alternatively with straight toothing (R7) for fast cross-cutting. L H Artikelkod T 222H22R7 22 550 mm 10x 7 t.p.i 0,52 7392746460365 222H22U7 22 550 mm 10x 7 t.p.i 0,4 7392746490089 HAND SAW PREMIUM ! BOARD Specially group-toothed saw, ideal for cutting of chipboard, block board and other hard board materials. L H Artikelkod T 260H18 18 450 mm 10x GT 0,48 7392746460341 260H24 24 600 mm 10x GT 0,2 7392746444266.
Load more

Recommended publications
  • Metalwork & Woodwork Saws
    HAMMERS - ANVILS - METALWORK & WOODWORK SAWS C HAMMERS BENCH PIN & ANVIL 77 CABLE TACKER GUN 76 DAVID USE PHOTO COPING SAWS 79 SD0010 FRETSAW BLADES 79 FRETSAW FRAMES 79 O HAMMER S & MALLETS 72 - 74 HACKSAWS 76 - 77 MINITURE ANVILS 74 MINITURE PINS 75 MALLET MITRE BOXES 82 PIERCING SAW BLADES 78 PIERCING SAW FRAMES 78 N DAVID USE PHOTO PIN PUSHERS 75 SD0010 RAZOR SAWS 81 SAW BLADE LUBRICANT 78 SAW KNIFE BLADES 81 STAPLE GUNS 75 - 76 V-BLOCK & CLAMPS 77 WEB STRETCHER 82 T ANVILS WOOD SAWS 80 - 81 X-ACTO RAZOR SAWS 81 DAVID USE PHOTO ZONA RAZOR SAWS 79 SD0010 E SAWS N DAVID USE PHOTO SD0010 T V BLOCK & CLAMP DAVID USE PHOTO SD0010 S Last Revised 04/07/2011 71 SQUIRES MODEL & CRAFT TOOLS HAMMERS & MALLETS MAGNETIC TACK HAMMER 6oz a specially designed hammer having one striking face magnetised for use when fitting small nails JEWELLERS MALLET a lightweight stainless steel mallet similar and upholstery tacks. The head features a claw for removing to those used by watchmakers and jewellers, with a solid head and tacks, the striking surface is a magnetic split pattern. The head is knurled shaft. hardened and pol- Length 145mm. ished. Fitted on a Weight 2½oz. hickory handle. Weight 6oz, length overall CODE TYPE PRICE 265mm. HA0025 Jewellers Mallet.................................................... £3.99 WATCHMAKERS MALLET a lightweight jewellers and watch- CODE TYPE PRICE makers mallet with a solid brass head. The handle is 260mm long 051-006 Magnetic Tack Hammer 6oz................................. £14.99 and has an increased diameter and is knurled for extra grip.
    [Show full text]
  • Using Veneering Tools
    Using veneer hand tools Veneer Tape Dispenser A gum tape dispenser that will take 3/4”wide gum tape is excellent for securing veneer seams together. A manual pull and tear machine which has a brush or sponge that will moisten tape (25 gram weight). It is indispensable for any shop that works with veneer. A sponge in a cup works well for moistening short lengths of tape for smaller projects. Veneer Gum Tape 25 to 30 gram (non-perforated) veneer tape that has water activated hide or vegetable glue is ideal for veneering. It is cut to length, moistened with a sponge or with the tape dispenser wetting system, placed over the veneer seam or joint, and smoothed or burnished down with a brush or rag to secure it firmly onto the veneer. It is used for final assembly of veneer joints in decorative veneering, in order to create a single skin or sheet of veneer. Ideally, after the gum tape is applied over the joints, the assembled veneer skin gets placed between two plattens to insure that the moisture from the gum tape does not warp the veneer until it dries. This complete skin will then be glued onto a foundation or core of smooth plywood or MDF, with the gum tape side exposed. After the veneer is glued to the core with a mechanical or vacuum type veneer press, the tape is removed by moistening and peeling it off with a sharpened flexible putty knife, or sanded off the veneer with a belt, stroke or random orbital sander.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Hardwood Veneer Lesson Plan
    Hardwood Veneer Lesson Plan Keywords: veneer, saw log, furniture, woodworking Lesson Plan Grade Level: 6th- 8th Total Time Required For Lesson: 50 minutes Setting: Classroom Subjects Covered: Science Topics: Wood Products, Manufacturing Goals For The Lesson: Students will be capable of identifying and discovering the uses of hardwood veneer. Students will gain an understanding of the process of manufacturing hardwood veneer. Materials Needed: Hardwood Veneer fliers (From The Woods Series) Hardwood Veneer Pretest Hardwood Veneer Posttest Paper Pencils Appendix 1 Ruler with millimeters (calipers will also work if available) Sample of veneer (contact furniture stores, wood makers, veneer mill etc. for samples) State Standards Addressed: E&E Standards: 4.2.7, 4.8.7 Teaching Model: Experiential Learning Model (Experience, Share, Process, Generalize, Apply) Methods: Preparation: Read through the entire lesson to ensure your understanding of the material and activity. After reading the lesson, walk through the school and identify products with hardwood veneer. Determine locations where the students will be permitted to walk through during class time. Doing The Activity: Introduction to the lesson: Demonstrate 0.6 millimeters to the students, on a ruler. Ask the students to describe objects/ products that may have the measurement (such as a thick piece of paper). Explain to the students that they will be learning about a material that can have a 0.6 millimeter measurement and yet still create beauty. Steps: (Experience and Share Stages 30 minutes) 1. Administer the pretest to the students; explain that the purpose of the pretest is test knowledge the students already have acquired on the subject.
    [Show full text]
  • Tuning up a Veneer Saw Nce at a Wood- Flatten the Spine
    TUNING up A VENEER SAW nce at a wood- Flatten the spine. O working show, 2 Any bumps or I witnessed Frank unevenness of the Pollaro making up spine against the veneered chess blade may result boards. He must in a curved blade have produced more that won’t easily cut than 30 pieces and to a straight line. each was perfect. To establish a flat spine, flatten the The seams were tight back of the spine and clean; there where it attaches was no tear-out or to the blade on a split veneer. What coarse sharpening impressed me most stone. was that he was getting these results straight from his Flatten the back veneer saw, with no 3 of the blade. On fussing or cleaning up the same stone, flatten the back on a shooting board 1 later. After that, I of the saw blade. You may want to was determined to Straighten the tang. Most veneer saws have an advance to finer grit improve the perfor- uncomfortable hang (the angle of the handle to stones for a more mance of mine. the blade). I found that by lowering the handle and polished blade. I Here are the steps placing it more in line with the saw blade, I got bet- find a smoother I take to “soup up” a ter control and improved results with less pressure. blade is easier to veneer saw. It’s not After taking apart the saw, I placed the spine keep clean and rust- necessary to do this in a vise and with vise grips, gently straightened free.
    [Show full text]
  • No-Fear Veneering
    woods, many of which are of rare, exotic, and expensive difficult or impossible to find whenin lumber properly form gluedthese todays. a sound Another advantage is that, and not subject to seasonal substrate, veneer is very stable Therefore, it can be arranged inexpansion any pattern and orcontraction. combination of species without danger of fromcracking a log or in splitting. closely matched Many sheets,veneers allowing are sliced arrangement in sequence of many symmetrical or canrepeating seem intimidatingpatterns. and To the uninitiated, veneering I’ll explain the basic tools complicated. But not to fear; and techniques that you need to get started. Then, as an exercise, I’ll walk you through the steps for creating a “four- way” match, like the one used to make the box top on page 48Choosing (see “Curved and Top Box”). storing veneer sizes,Veneer in is available in a wide 1 1 fromvariety 20 of" to species, 42" as figures,shown in and thicknesses ranging Photo⁄ A ⁄ No-Fear . The two common Rotary-cutmethods for producing veneer are rotary- and flitch-cutting. Veneering spinning log veneer to peel is awaymade long, by pressing a long knife against a Give your work a beauti ful skin. those you commonly see on wide, continuous sheets, like By Jonathan Benson Flitch-cut the faces of construction-grade plywood. veneer is Veneering has been around produced by knifing tangentially since the age of the Pharaohs and through the log in sequence, has been used to create some of substrateApplying a can decorative beautify “skin” mundane of ofessentially closely matched slicing it sheets into a thatstack wood panelsveneer andto an stretch underlying the use youof paper.
    [Show full text]
  • Popular Woodworking Magazine November 2010 #186
    1 Easy Trick Stops Sags in Your Finish Forever NOVEMBER 2010 ■ #186 Country Corner Cabinet Easier Ways to Do Tombstone Doors & Fancy Curves Miter Box Saws: Cheap, Accurate, A Cinch to Find Ticking Sticks: A Carpentry Trick To Fit Any Door How to Age Your Projects So They Don’t Look Fake US $5.99 11 Free Video Visit with the Builder of this Project: Visit popularwoodworking.com/nov 10 0 FnL1 04 0120 01 JUYrVyBQdWJsaWNhdGlvbnMsIEluYyAo 02 SW9sYSBkaXZpc2lvbikPR3JlZ29yeSBL 03 cnVlZ2VyAEu7AL4EMTAuNAI4MAExBVVQ Qy1BDDA3NDQ3MDAxMzU1NgA= 74470 01355 6 Display until November 29, 2010 popularwoodworking.com ~~c1_1011_PWM_Cover_US.inddc1_1011_PWM_Cover_US.indd C1C1 99/10/10/10/10 112:13:412:13:41 PPMM Meet a new company with a 64 year heritage. We’re new to the neighborhood. But not the industry. For more than 60 years, Canadian-based General Mfg. has been designing, producing and selling high quality, reliable woodworking machinery. Now we’ve opened our first American distribution center in Murfreesboro, TN. This new venture will allow us to better serve our American distributors and their customers. So you’ll enjoy faster, easier access to our extensive line of woodworking products. And know that whatever you build, your tools were built on a long, proud heritage of trust. For more information visit general.ca. www.general.ca General® International USA Inc., 760 Jessica St., Murfreesboro, TN 37130 For more information, go to PWFREEINFO.COM. ~~c2-03_1011_PWM_TOC.inddc2-03_1011_PWM_TOC.indd c2c2 99/8/10/8/10 33:37:58:37:58 PPMM CONTENTS NOVEMBER 2010 36 40 48 FEATURES 30 Hanging Corner 40 Cut, Glue & 48 Fit Doors with Cupboard Sand Veneer Ticking Sticks Graceful curves and a clever tombstone-panel Simple and inexpensive tools are the core of a This traditional trick used by carpenters can door add a stylish challenge to this 18th- successful veneering job.
    [Show full text]
  • How To... SERIES Make Lippings in the Second of Our Short Cuts Series Marc Fish Shares His Workshop’S Favourite Lippings Techniques
    NEW How to... SERIES Make lippings In the second of our Short Cuts series Marc Fish shares his workshop’s favourite lippings techniques ippings and veneering open on two areas for strength: up many exciting areas of 1. Glue surface Lwoodworking that many people 2. Face veneers overlapping them never venture into. Hopefully this On solid lippings the glue surface can article will encourage those into be increased if we make a tongue & having a go at techniques that will groove joint as this will increase glue push the boundaries of their making. area and ultimately strength. A false First, a little theory: lippings are tongue will also do the same job, used to cover up an unattractive and 6mm MDF or ply is ideal with a substrate which could be of MDF, ply 6.5mm groove cut with either a router or solid wood of a different species. or spindle moulder. This allows a little Lippings line-up of essential tools for the job Lippings or wood edging will rely lateral adjustment and room for glue. 12 F&C161 www.woodworkersinstitute.com F&C TECHNIQUE: Short cuts, solid and veneered lippings Router-cut grooves Grooves in lippings cut with a spindle moulder Short Cuts series Iron-on veneer edging w Dec 09 – Veneer jointing: including shooting edges by hand, planer, router w Winter 09 – Wood edging: solid and veneered, trimming flush with chisel, block plane and router w Jan 10 – Laminating: substrates, mould making with extruded polystyrene, MDF, laminate cutting and marking out Iron-on edging comes ready glued..
    [Show full text]
  • This Is Elwood Maunder Speaking in Tacoma, Washington, and It Is Friday, August 11, 1967
    Ed Heacox An Interview conducted by Elwood R. Maunder Forest History Society New Haven, CT 1967 All rights reserved This is Elwood Maunder speaking in Tacoma, Washington, and it is Friday, August 11, 1967. I'm interviewing Ed Heacox, former chief forester of the Weyerhaeuser Company, recently retired from that role in July. MAUNDER: Let's just kick off this interview with you with a few comments you might have to make about Charles H. Ingram and John Wahl and their role as you saw it in the Weyerhaeuser story. Would you just spin out a little bit about that? HEACOX: Yes. I think John Wahl first started working for the company in the old Clemmons Logging operation down in Grays Harbor. He worked there for several years and then went to Snoqualmie Falls and eventually became logging superintendent at Snoqualmie Falls under the general manager there, whose name was Tip O'Neil. He subsequently moved to the Vail McDonald operation and became logging superintendent and manager of the operation and then, I don't know the year, but he later came to Tacoma as an assistant to Charles Ingram in the general area of woods and timber and forestry matters. Mr. Ingram, as general manager of the company, had no staff at all in Tacoma. Of course, there was the usual run of supporting departments in accounting and law, and after 1936, industrial relations and public relations but they were relatively small and didn't operate too closely with the general management of the company. They had their own functions to perform.
    [Show full text]
  • Dictionary of Occupational Safety and Health Terms English – Spanish
    Dictionary of Occupational Safety and Health Terms English – Spanish WHY A SPANISH-ENGLISH / ENGLISH-SPANISH DICTIONARY OF OCCUPATIONAL SAFETY AND HEALTH TERMS? Latino / Hispanics represent over 8% of the Oregon population. Between 1990 and 2000, the number of Hispanics in Oregon grew 144%. If this trend continues, 33% or one in three Oregonians could be Latino / Hispanic by 2020. Oregon’s economy relies on nursery, agriculture, manufacturing, forestry, construction, food processing, restaurants, hospitality, and services. These sectors in turn, rely on workers whose English is limited. This dictionary has two target audiences. The first is Oregon English-speaking employers and the second is Oregon limited English-Speaking Latino / Hispanic workers supervisors and employers wishing to improve occupational safety and health communication. In preparing this dictionary, every effort has was made to provide the most current, correct, and clearly expressed information. Nevertheless, inadvertent errors may have occurred. The Department of Consumer and Business Services and the Oregon Occupational Safety and Health Division (OR-OSHA) make no warranties or representations whatsoever regarding the quality, content, completeness, adequacy, or accuracy, of the information. This material is not a substitute for any provision of the Oregon Safety Employment Act or any standards issued by OR-OSHA. ASSISTANCE For further assistance in locating qualified interpretation, translation and language services, please contact you local colleges, universities,
    [Show full text]
  • Wood-Using Industries
    t! 1 lr riiilii trlilliriilil lllii tiiltit iliiliiiiiiii i,lii l;iriJl ]litr il ilii li -J ,1 ,l "r. i:t 1 ,[:O][PAC"t' SD Lj 30 W(p tgi, : j'; T P R E F A C E This directory of the Jood-Using Industries in Benton9 Lanes Lin- coin and Linn. counties has been prepared upon the recjueit of the Woodland Corirnittee of the Upper Willamette Resource Conservation and Development Project0 The RCD Project is an overall program for accelerating resource development in the project area. Since the 1972 editions the industry has experienced. a number of changes some compani.es have terminated their operations while some new ones have coue on-streams and others have had. a naine change. The purpose of this puhlicatiou is to provide a condensed. coipila- tion of theindustriesas a he1ptorardsbetter utilizationand. mar- keting. It covers all priinar3r and secoiclary manufacturin within the RCD project area. This new edition includes forest consult- ants9 contract tree panters9 horse loggers and. various agencies avail&ole for services. Printing has been made iDosile :r Linn Cooperative Jcbension Service9 Lane Cooperative ictension Service and the Soil Conservation Service, b- C O T E T C PREFACE Contents Directory Guide Trends of' the Wood-UsL% Industry . i ooxiuras Industries inBentonCountye e..... e.a s... s 3 e County . Lincoln County e e s s o e s s e s e s Limi County . i iiíRD\O ODS Lrestin, Products . e . 20 Industries in J3enton9 Lane9 Lincoln L' Linn counties . 21 fiR Productiona,ndPrices .................. 22 Industries in Benton9 Lanes Lincoln Linn counties .
    [Show full text]
  • Book of Wood
    The Miracle Product Assume for a moment that wood had never existed... plenty of stone, metal, glass... everything... but no wood. Suddenly out of the research laboratories comes an amazing new product. It is available in unimaginable quantities. The supply renews itself... if not abused, a never-ending supply. It is strongly competitive in cost. It does not shatter and its resilience permits it to absorb shock that would rupture or break other materials. It has fine natural insulating qualities. It can be produced in large sizes and/or laminated for sheer strength. It stands up ruggedly almost indefinitely. It has aesthetic qualities of a range in nature and character that will not be copied by man, because man can only produce the stereotype. It is the ideal surface for painting. It works into all nature of articles (from usefully rugged to beautifully delicate) with the simplest of tools. It possesses a tremendous strength-to-weight ratio. It laminates well with good adhesive. It engages the thread of a screw or grips a dowel pin or nail forced into it. Then, too, left in its natural state, it provides rest and refuge for man and beast, protection of water sheds, and even fuel, if need be. The small parts of which it is constituted may be taken apart and put back together again in other forms... paper, for instance. Wouldn’t that be the most remarkable discovery? Our most fabulous natural resource is often taken for granted. Without trees (wood), life as we know it would not be possible. The Beauty and Character of Wood It is as difficult to adequately describe the natural beauty and character of wood as it is to describe an original painting or other work of art.
    [Show full text]