Performance Parts Performance PERFORMANCE PARTS • Chrome plated base and top • Made of steel • Comes with filter bolt and nut HOOD PINS • Fits 2-3-4 barrel Carbs with 5-1/8 in. neck • Gives competition look • High flow white filter • Quick removal of hood/deck Mr. Gasket Easy-Flow Air Cleaner GAS 1486 • Hardware included Mr. Gasket Hood And Deck Pinning Kit GAS 1016 • Super Flow; Good Filtration • Urethane Foam Element • Strong Metal Inner Frame • Hood pin anchors ensure your hood stays latched • Performance Benefits • Crafted from billet aluminum and steel • Cleans With Soap and Water • Installation requires a rivet gun and extensive drilling Edelbrock Pro-Flo 1000 Series; • Professional install is suggested Re-Usable Air Cleaner EBK 1002 APC Universal Fit Racing Hood Pin Kit PLT 155103

• Edelbrock triple chrome-plated round air cleaner #1223 work with all popular PERFORMANCE PARTS 5-1/8" diameter (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB). • The 10" and 14" models have knock- ACCESSORIES outs in the air cleaner base for use with Edelbrock crank case ventilation adapter • Available in 1 in. wide x 12 ft. rolls #1205 (sold separately). • Withstands temperatures from -60 degrees F (-54 • #1208, #1209 and #1221 fit all C) to 500 degrees F (260 C) Edelbrock Carburetors. • Seal ends of hoses, bundle & wrap wires, • Heights of air cleaners are in parentheses, weatherproof connections & more measured from the gasket flange to the top of the supplied retaining nut. • Can be applied to wet surfaces • Dimensions are accurate within 1/8". • Corrosion & moisture resistant Edelbrock Pro-Flo Black 14" Round Air Cleaner with 3" Paper Design Engineering Quick-Fix Self-Adhering Element (Deep Flange) EBK 1223 Tape - Black DEI 10491

• Stamped From 18-Gauge Steel • Triple-Chrome Plated PERFORMANCE PARTS • High-Quality Finish • Great Looks • Works With All 5.125 in. Carbs AIR CLEANER ASSEMBLES Edelbrock Pro-Flo; Chrome Air Cleaner EBK 1221

• Chrome finished top • Plated steel base • High CFM • Stamped From 18-Gauge Steel • Replaceable paper element • Triple-Chrome Plated • Flame-retardant element • High-Quality Finish Mr. Gasket Easy-Flow Air Cleaner GAS 1487 • Great Looks • Works With All 5.125 in. Carbs Edelbrock Pro-Flo; Chrome Air Cleaner EBK 1208 • Chrome finished top • Plated steel base • High CFM • Replaceable paper element • Triple Chrome Plated • Flame-retardant element • Open Element Style Mr. Gasket Easy-Flow Air Cleaner GAS 1480 • Low Restriction • Traditional Look Holley Chrome Round Air Cleaner HOL 120-102

• Has chrome plated steel • PVC attachment included • Replacement Filter: 48022 • Comes with all hardware • Red synthetic media • Fits 1 and 2 barrel applications • Fits Carburetors and TBI bodies with • Replaceable filter 5-1/8" inlet Mr. Gasket Deep-Dish Air Cleaner • 14 by 3 inch tall assembly with Extraflow filter lid GAS 4354 • Zinc plated 1-1/4 inch drop base for increased hood clearance Spectre Extraflow Air Cleaner KN 47623

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 1 PERFORMANCE PARTS • Constructed from high quality material • Offers long lasting durability AIR INTAKES • Ensures proper fitting Mr. Gasket Replacement Element GAS 1489A • Estimated Horsepower Gain: 15.66 HP @

Performance Parts 4688 RPM • Replacement Filter: RF-1044 • Pro-Flo 1000 Series, with the popular reusable • Guaranteed horsepower gain air #1099 filter, offers superior flow capacity, low • Designed to improve throttle response profile, good filtration, performance benefits and and engine sound long-term savings • Free-Flowing High Density Polyethylene Tube Edelbrock Air Cleaner Element EBK 1099 K&N Performance Intake Kit KN 63-1561 • Edelbrock Universal Pro-Flo Conical Air Filter #43641 is an economical way to ensure your engine is getting clean air, without the expense of buying a new filter • Universal air intake system that fits many every few thousand miles. applications • Its constructed for superior filtration and air flow • Includes a 3 inch intake tube, integrated performance. air sensor inlets, adapters and support • Features triple chrome plated trim for a show-quality brackets look. • Spectre air filter sold separately • Universal Fit Series is also designed with three inlet adapter rings for use on 3", • Designed to increase horsepower 3.5" and 4" inlet tube systems. Spectre Air Intake Civic Integra KN 8219 • It also feature the Edelbrock exclusive Pro-Charge clean strip for easy maintenance. Edelbrock Pro-Flo Universal Red Medium Conical Air Filter with 3", 3.5", and 4" Inlet EBK 43641 • Replacement Filter: HPR9881 • Designed for horsepower and torque increase • Designed for low restriction and more power • Easy to install performance • Washable/reusable high quality synthetic material • Includes a red Spectre air filter • Use with AccuCharge precision oiling system • High quality polished aluminum tubes • Measures 13.875 inches O.D. x 11.6 inches Spectre Air Intake Kit KN 9900 I.D. x 2.875 inches tall • Designed for 14 inch assemblies Spectre Air Filter KN 880136

• Replacement Filter: HPR9891 • Designed for horsepower and torque • High flow filter designed to fit 3 inch, 3 1/2 inch increase and 4 inch tubes • Easy to install performance • Quality materials used throughout including • Includes a red Spectre air filter washable, oiled synthetic media, urethane, and steel • High quality polished aluminum tubes mesh • Factory pre-oiled and ready to use Spectre Air Intake Kit KN 9918 • Includes adapter rings Image Shown: 8166 Spectre Air Filter 2.625 in Tall, Black KN 8161 Spectre Air Filter 2.625 in Tall, Red KN 8162 PERFORMANCE PARTS Spectre Air Filter 2.625 in Tall, Blue KN 8166 AIR FILTERS Spectre Air Filter 2.625 in Tall, White KN 8168

• Fits our 1487 and 4342 air cleaner • 3 inch inlet • Made of high flow paper material • High-flow washable oiled synthetic material • Has rubber seals • Factory pre-oiled • Has wire screen inside • Easy to install • Has wire mesh outside to prevent damage Spectre Air Filter 6.5 in Tall, Red KN 9132 Mr. Gasket Replacement Air Filter Spectre Air Filter 6.5 in Tall, Black KN 9131 Element GAS 1487A Image Shown: 9132

• High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes • This filter is 10 in. Diameter 2 in. High • Quality materials used throughout including washable oiled synthetic media, urethane, and steel mesh • Filter is made of high flow paper • Factory pre-oiled and ready to use • There are other sizes available • Includes adapter rings Mr. Gasket Replacement Air Filter Element GAS 6479 Spectre Air Filter 6.7 in Tall, Black KN 8131 Spectre Air Filter 6.7 in Tall, Red KN 8132 Spectre Air Filter 6.7 in Tall, Blue KN 8136 Image Shown: 8131 Spectre Air Filter 6.7 in Tall, White KN 8138

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

2 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance • High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes • Designed specifically for the cleaning and care of all Spectre HPR filters • Quality materials used throughout including oiled, washable synthetic media, urethane, and steel mesh • 12 ounce bottle of cleaner and 8 ounce bottle of oil • Factory pre-oiled and ready to use • The graduations on the bottle allow precise measuring • Includes adapter rings • Spray top bottles make cleaner application effortless Spectre Air Filter 8.75 in Tall, Black KN 9731 Spectre Accucharge Kit Clear KN 884820 Spectre Air Filter 8.75 in Tall, Red KN 9732 Spectre Air Filter 8.75 in Tall, Blue KN 9736 Spectre Air Filter 8.75 in Tall, White KN 9738 Image Shown: 9738 PERFORMANCE PARTS

• K&N's Universal Air Filters are designed and manufactured for MODULAR INTAKES a wide variety of applications including racing vehicles, radio-controlled , generators, snowmobiles, tractors, and other applications. • Universal • Regardless of the angle or offset diameter of the • Stainless steel air intake, there is probably a K&N Universal air • Ideal for use with 3 inch air intake systems filter for your equipment. • Designed for 3 inch system components • All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow Spectre T-Bolt Clamp KN 8703 for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. • K&N universal air filters are washable and reusable. • Attach directly to any air box inlet, plenum, intake tube or mounting plate K&N Universal Rubber Filter KN RE-0850 with a 3 inch O.D. to bring cold air into the engine • Memory-flex design helps retain its position and bends • This is the last air filter your vehicle will ever need! • Kit includes 28 inches of ducting and two • Designed to increase horsepower and acceleration threaded PVC couplers • Hundreds of sizes and shapes for most • Black variable length ducting applications • Replacement threaded coupler - part • High air flow with excellent filtration number 87411 • Clamp-on washable and reusable air filter Spectre 3" Air Duct Hose, Black KN 8741 K&N Universal Rubber Filter KN RE-0870

• Coupler is 2-1/4 inches long • This is the last air filter your vehicle will ever need! • Connects a 3 inch outside diameter tube to another • Designed to increase horsepower and acceleration 3 inch tube • Hundreds of sizes and shapes for most • Includes 2 Stainless steel worm gear hose clamps applications • Made from PVC • High air flow with excellent filtration • Clamp-on washable and reusable air filter Spectre Intake Coupler, 3-3/2.5", Black KN 8771 K&N Universal Rubber Filter KN RE-0930 Spectre Intake Coupler, 3-3/2.5", Red KN 8772 Spectre Intake Coupler, 3-3/2.5", Blue KN 8776 Image Shown: 8771

• This is the last air filter your vehicle will ever need! • Designed to increase horsepower and acceleration • Hundreds of sizes and shapes for most • Coupler is 3 inches long applications • Connects a 3 inch outside diameter tube to a 2-1/2 • High air flow with excellent filtration inch outside diameter tube • Clamp-on washable and reusable air filter • Includes 2 Stainless steel worm gear hose clamps • Made from PVC K&N Universal Rubber Filter KN RE-0950 Spectre Intake Coupler, 3"-2.5", Black KN 8751 Spectre Intake Coupler, 3"-2.5", Red KN 8752 PERFORMANCE PARTS Spectre Intake Coupler, 3"-2.5", Blue KN 8756 Image Shown: 8752

FILTER ASSESSORIES • Coupler is 2 inches long • Connects two 4 inch outside diameter components or air intake tubes • Eliminates air cleaner fit problems • Includes 2 stainless steel worm gear hose clamps • Helps clear throttle or transmission linkage • Made from black PVC • High-impact heat resistant material Spectre 4" Coupler Black KN 9771 Mr. Gasket Air Cleaner And Riser Kit GAS 6411G

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 3 • Coupler is 3-1/2 inches long • Universal bolt hole configuration for multiple • Connects 4 inch outside diameter component or air applications intake tube with a 3 inch outside diameter • For engines with MAF sensors and 3 inch openings • Comes complete with 2 Stainless steel worm gear hose • Allows a 3 inch air filter or intake tube or coupler clamps to be mounted directly to MAF • Made from black PVC • Easy to install • May require drilling additional holes depending on Performance Parts Spectre 4" X 3" Coupler Black KN 9761 the application Spectre MAF Sensor Adapter KN 81413

• Co-polymer ABS resin construction insulates the intake tract • Universal modular air intake from heat • Light-weight, high impact ABS plastic, mounting plate • Includes chrome plated collar clamp has outside measurements of 3 3/4 inch x 4 inch • 3 inch outside diameter • Mounts to flat surface • Combine with other 3 inch chrome tubes to create an intake for • Made from high quality material almost any application • Smooth interior helps deliver superior air flow to your engine Spectre Air Duct Mounting Plate KN 8148 Spectre Intake Tube 6" Straight KN 8718 • Includes 3 vacuum/vent fittings and port openings for multiple configurations • 3-1/2 inch inside diameter • Durable co-polymer ABS resin • 2 inches long • Chrome exterior finish • Constructed from durable reinforced rubber • 3.0 inch outside diameter adapter • Designed to be used as a replacement part or for custom • Use with coupling collar P/N 8706 or with standard do-it-yourself applications flexible couplers Spectre Intake Tube 90 Degree KN 8698 Spectre Intake Adapter/Manifold KN 8707

• Allows attachment of 3 inch diameter duct components • Used with 813x Series, 816x Series and 973x Series • 3 inch diameter elbow filters • 60 degree elbow • Universal application • Co-polymer resin insulates from heat • Made from high quality material • Triple chromium plating deflects heat • Smooth inside delivers higher airflow to engine Spectre Air Duct Filter Adapter KN 8147 Spectre Intake Tube 60 Degree Chrome KN 8668 PERFORMANCE PARTS • Co-polymer ABS resin construction insulates the intake tract from heat • Includes chrome plated collar clamp FILTER ACCESSORIES • 3 inch outside diameter with a 45 degree center bend • Combine with other 3 inch chrome tubes to create an intake • Galvanized steel bolt nut and adapter for almost any application • Will fit most domestic Chrysler, Ford, and • Smooth interior helps deliver superior air flow to your engine GM applications Spectre Intake Tube 3" Chrome ABS 45 Degree • Allows use of a 5 inch filter element Elbow w/Collar KN 8738 Mr. Gasket Universal Air Cleaner Stud Kit GAS 6399

• Attach vacuum lines almost anywhere on intake tube • Chrome plated • For use with our modular intake systems where vacuum hoses are required • Fits 1/4-20 and 5/16-18 threaded studs • Includes 2 hole saws, 6 grommets and 10 Mr. Gasket Air Cleaner Spin Nut GAS 9863 fittings to fit all popular vacuum lines and air sensors • Fits all popular vacuum lines and air sensors Spectre Vacuum Sensor Adapter Kit KN 8711 • Air Cleaner Center Nut Small Chevy Bowtie Style Black Center w/ Red Chevrolet Performance Carburetor Air Cleaner Center Nut; Small Chevy Bowtie • Co-polymer ABS resin construction insulates the intake tract from heat Style; Black Center w/Red STY 141-369 • Combine with other 3" chrome tubes to create an intake for almost any application • Not for turbo-charged/supercharged engines. • A must-have for Chevy engine air cleaner kits. • Includes coupling collar • Chrome-plated zinc die-cast for durability and good • For sensors calibrated to 2.875 inch inside looks. diameter tubes • Center nut fits both 1/4"-20 and 5/116"-18 studs. Spectre Air Flow Sensor Mount KN 8705 Chevrolet Performance Center Nut for Chevy Engine Air Cleaners STY 141-333 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

4 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance PERFORMANCE PARTS • The top of each air breather cap is embossed handsomely with Ford RACING, COBRA, or MUSTANG emblems. BREATHER FILTERS • The perfect complement to your valve covers. Ford Racing Breather Cap Push-on STY 302-215 • Triple chrome-plated steel top and base • Made with pre-dyed synthetic media for lasting color • Includes a stainless steel adjustable clamp • 10 mm flange inside diameter • Compliment your Chevy valve covers! The top of each air breather cap is embossed with a raised bowtie emblem. • Fits 3/8 inch to 1/2 inch (8-12mm) tubes • For use in valve covers with grommets fitting 1.22" holes. Spectre Breather Filter 10mm, Black KN 3991 • Use with grommet in PRF grommet set p/n 141-615. Spectre Breather Filter 10mm, Red KN 3992 Chevrolet Performance Breather Cap, Raised Bowtie Emblem, Chrome, Push-In Style, 3" Diameter STY 141-616 Spectre Breather Filter 10mm, Blue KN 3996 Image Shown: 3991 Spectre Breather Filter 10mm, White KN 3998 • Premium Black Crinkle breather cap. • The top of each air breather cap is embossed handsomely with a raised Bowtie Emblem to compliment the genuine factory-parts appearance of the engine. • Internal oil baffle • Technical Note: Use with grommet in Grommet Set PROFORM • Polyurethane filter element P/V 141-615. • Replace rocker cover PVC valve Chevrolet Performance Crinkle Push-In Air Breather Cap, 3" Mr. Gasket Breather/Oil Filler Cap GAS 2057 Diameter, Black STY 141-754

• Open element PERFORMANCE PARTS • Push-on style • Fits 122 in. OD holes • Chrome plated steel THERMOSTATS Mr. Gasket Open Element Breather GAS 2049 • High performance • Resists variations in coolant • Replaces stock grommets • Brass and copper construction • Eliminate blow-by from non baffled valve covers • Opens at right temperature • Will not work with stud girdles Mr. Gasket High Performance Thermostat GAS 4363 • 2 per set Mr. Gasket Baffled Breather Grommets GAS 5425

• Rated to open at 180 degrees • Opens at right temperature regardless of rpm • Chrome plated steel • Brass and copper construction • Internally baffled with filter Mr. Gasket High Performance Thermostat GAS 4364 • Fits valve covers with 122 in. Opening Mr. Gasket Breather/Oil Filler Cap GAS 9810 • Indicates coolant temperature • Helps to prevent coolant injuries • Chrome plated steel • Integrated coolant reclamation valve • Is internally baffled • Improves under hood appearance • Comes with rubber grommet • Fits most domestic vehicles • Mr gasket logo on the top Mr. Gasket Thermocap Radiator Cap GAS 2471S Mr. Gasket Breather/Oil Filler Cap GAS 2054

• Contain An Effective Filter • Traps Oil Vapor PERFORMANCE PARTS • Prevents Engine Compartment Contamination Edelbrock Valve Cover Breather EBK 4405 BRACKETS

• Chrome plated steel • This bracket is 14 in. x 1 in. • Edelbrock Part # 4403 Valve Cover Breather is a traditional steel one-piece push in design. • Has 4 in. slot on one end • It is finished with a black mini texture powder coat to • Has 2 -3/8 in. holes on the other end match our black valve covers. • Has a slight curve on slotted end Edelbrock Signature Series Black Mr. Gasket Universal /Generator Arm GAS 9851 Push-in Breather EBK 4403

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 5 PERFORMANCE PARTS PERFORMANCE PARTS DIP STICKS TIMING

Performance Parts • Fits Chevy small block 1955-87 • Fits Chevy small block 1965-79 283-400 CID • For use with OEM style timing chain only • Block mounted • Chrome plated steel • Chrome plated steel Mr. Gasket Timing Cover GAS 4590 Mr. Gasket Oil Dipstick And Tube GAS 6235

• Fits Chevy small block • Adjusts with screwdriver • Chrome plated steel and red anodized • Fits GM TH350 Chevy specific modify for others Mr. Gasket Timing Tab GAS 4598 • 27 in. Length • Chrome plated steel Mr. Gasket Automatic Transmission Dipstick With Tube GAS 9764

• Features 3 ways of optional timing adjustment. • The Zoom Timing Gear Set features nodular iron sprockets and a dual-row roller chain for accuracy and durability. • Similar To Stock Competition Cams 3-Piece Timing Gear Set PCC 160001 • Simple Tools Required Mr. Gasket Oil Dipstick & Tube GAS 6920 PERFORMANCE PARTS VALVE COVERS PERFORMANCE PARTS

• Fits Chevy small block OIL CAPS • OEM height • Chrome plated steel GAS 9800 • Chrome plated for great looks Mr. Gasket Valve Cover • Fits valve covers with 122 in. Diameter openings Mr. Gasket Oil Filler Cap GAS 9815

• Triple Chrome-Plated • Accept All Emissions Equipment • Accept PCV Valve • Chrome plated for great looks • Includes PCV Valve Holes • Rubber Grommets For Breather Mr. Gasket Valve Cover/Oil Filler Cap GAS 2062 Edelbrock Signature Series; Valve Cover EBK 4449

• Complete your engine with these premium bowtie-emblem oil filler caps. • The Edelbrock #4443 Signature Series • Each one features an embossed and raised bowtie emblem. Valve Covers are designed for Chevrolet • Push-in style for valve covers with 1.22"-diameter hole. 262-400 í59-86 applications. • Engineered for function and styled for Chevrolet Performance Oil Filler Cap, Embossed great looks, Signature Series valve covers and Raised Bowtie Emblem - Push-In. STY 141-630 have stock-style breather baffles that prevent oil passage to the PCV valve. • These quality valve covers accept all • Push-In Style emissions equipment, including PCV valve holes. • 1.22 Hole • Rubber grommets for the breather and PCV valve holes are included. • Bowtie Logo • Matching breathers sold separately. • Black Crinkle Edelbrock Signature Series Valve Covers for Chevrolet 262-400, Chevrolet Performance Engine Oil Filler Cap STY 141-629 59-86 EBK 4443

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

6 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance • Black crinkle valve covers, with their PERFORMANCE PARTS distinctive look and boldly striking Bowtie and CHEVROLET Emblems, inlaid with classic Chevrolet red, are CED painted for long-term WATER OUTLET GASKET corrosion resistance, and then black crinkle painted on the outer surface. • Edge molded rubber water outlet gasket is reusable Chevrolet Performance Black Crinkle Valve Covers For Chevy • Requires no gasket sealer Small-Block Engines, Stamped Steel STY 141-751 • Solid aluminum carrier for strength/rigidity Mr. Gasket Water Outlet Gasket GAS 738G • Give your engine a striking look with this complete Chevy small-block dress up kit in black crinkle. • Made from cellulose/nitrile composition • Black crinkle valve covers, with their • Provides excellent sealing and durability distinctive look and bold Bowtie and • These gaskets are die cut for precision Chevrolet emblems inlaid with classic • Can be trimmed for port modifications Chevrolet red, are CED-painted for long- Mr. Gasket Water Outlet Gasket GAS 740C term corrosion resistance and then black- crinkle-painted on the outer surface. • Includes a pair of tall baffled Bowtie valve covers (141-751), a 14" classic Bowtie air cleaner kit (141-752), a Bowtie timing chain cover (141-753), 8 Bowtie valve cover wing nuts (141-756, 2 PERFORMANCE PARTS packages), 8 Bowtie valve cover hold-down clamps (141-757, 2 packages) and a matching Bowtie push-in valve cover breather cap (141-754). Chevrolet Performance Dress Up Kit for Chevy Small-Block Engines CLUTCH ACCESSORIES STY 141-758 • High Clamp Load Diaphragm cover assembly is computer tested for clamp PERFORMANCE PARTS load, plate lift and finger height to ensure uniform and smooth operation • Street performance design with premium VALVE COVER GASKET organic friction disc • Where required, includes new clutch release bearing and pilot bearing/bushing • Provides excellent flange sealing and durability to complete the job • For high performance street drag race oval • Alignment tool (where available) and hydraulic line disconnect tool (where used) track included to ensure professional installation Mr. Gasket Ultra Seal; Valve Cover CARQUEST ZOOM Performance Clutch Set CQC 30048 Gasket Set GAS 175

PERFORMANCE PARTS • Provides Crisp Shifts • On Any Stock Automatic Transmission • Eliminates Soft/Sluggish Shift WATER OUTLETS • Eliminates Shift Overlap • Eliminate Clutch and Band Wear B & M Shift Improver Kit For 68-81 • Prevents water leaks TH-350 Transmission BMA 30262 • Precision die cast Mr. Gasket Water Neck GAS 2661

• Designed to resist binding and stretching. The crack-resistant aluminum quadrant provides stability throughout the range of • Prevents water leaks motion for precise actuation. • Precision die cast • The crack-resistant aluminum quadrant Mr. Gasket Water Neck GAS 2660 provides stability throughout the range of motion for precise actuation. CARQUEST Adjustable Performance Clutch Cable & Quadrant CQC 48000 • Chrome plated • This is a 45 degree neck • Comes with o-ring and bolts • Has small hose fitting on it • Designed to resist binding and stretching. The crack-resistant aluminum quadrant provides Mr. Gasket Water Neck GAS 2662 stability throughout the range of motion for precise actuation. • The crack-resistant aluminum quadrant provides • Chrome plated aluminum stability throughout the range of motion for precise • O-ring style to prevent leaks actuation. • Swivels for hard to fit applications CARQUEST Adjustable Performance Clutch • Comes with allen head bolts Cable & Quadrant CQC 48127 Mr. Gasket Water Neck GAS 9141G

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 7 • Alloy steel fasteners • Grade 8 Material • Heat-treated to grade 8 • Extra Thick Flat Washers • Resists rust and corrosion • Ideal For Minimal Space • Includes lock washers • 12-pt Head And Flange • Black plated finish • Zinc Plated For Protection Mr. Gasket Bolts GAS 912 Mr. Gasket Intake Manifold Bolts GAS 6091 Performance Parts

PERFORMANCE PARTS • Has a black oxide coating • Made of high quality grade 8 steel • Has a hex head with flange FASTENERS • Designed for minimal clearance applications Mr. Gasket Header Bolts GAS 915 • Made from neoprene rubber for ultimate sealing • Kit include 1 valve cover and 1 PVC grommets Mr. Gasket Valve Cover Grommet Kit GAS 6376 • Has a black oxide coating • Made of high quality grade 8 steel • Have a hex head with flange • Chrome plated steel • Designed for minimal clearance applications • Longer for better sealing Mr. Gasket Header Bolts GAS 917 • Helps prevent flange distortion Mr. Gasket Valve Cover Clamps GAS 9817

• Fits Chevy V8 • Designed for quick easy installation • Standard Y top 1/4 in.-20 x 5/8 in. • Compact bolt head and flange • Chrome plated steel • Black oxide finish resists corrosion Mr. Gasket Chrome Valve Cover Mr. Gasket Header Bolts GAS 918G Wing Bolts GAS 9824 PERFORMANCE PARTS • Features the T bar style 1/4 in.-20 x 5 in. • Includes set screws • Chrome plated steel Mr. Gasket Valve Cover T-Bar Wing Bolts GAS 9820 • 5/16" diameter, 7.794" length for Small Block Chevy (stock length) • Best choice when building street rods, RVs or daily • Chrome plated steel drivers • Custom short style • Meet or exceed all OE pushrod specifications • Fit almost any engine • Mate perfectly with High Energy and Magnum Rockers • Durable one-piece construction Mr. Gasket Valve Cover Clamps GAS 9899 Competition Cams High Energy Pushrods for Small Block Chevy, 5/16" Diameter, 7.794" Length PCC 7812-16 • High Quality Steel • Heat-Treated For Strength • Grade 8 Fasteners Competition Cams Cam Lock Plate PCC 4605S • Resists Rust and Corrosion • Black Plated Finish Mr. Gasket Flex Plate to Bolts GAS 6710 PERFORMANCE PARTS • Zinc plated • Grade 5 quality steel INTAKE MANIFOLDS • Washers included Mr. Gasket Intake Manifold Bolts GAS 955G • Maximizes Performance with Edelbrock Carburetors • Runners Tuned to Match Square • Has a zinc dichromate finish Carburetor • Made of high quality grade 8 steel • Maximizes Peak Torque Around 3500 RPM • Has a tall hex head to prevent slippage • Excellent Throttle Response and Mid- • Extra thick parallel ground washer Range Power • Washer provides more accurate and uniform torque • For Idle to 5500 RPM Street-Driven Mr. Gasket Ultra Seal; Harmonic Balancer Performance Bolt/Washer Kit GAS 945G Edelbrock Performer EPS; Intake Manifold EBK 2701

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

8 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance PERFORMANCE PARTS • Self-Selling Display Package • Includes All Hardware INTAKE MANIFOLD • Made In USA Flowtech Reducer HOL 10004FLT GASKETS

• Made from cellulose/nitrile composition material PERFORMANCE PARTS • Provides excellent sealing and durability • This gasket has silicone beading on both sides HEADER GASKETS Mr. Gasket Ultra Seal; Intake Gasket GAS 5821 • High-temperature exhaust material • Withstands extreme exhaust heat • Provides excellent sealing and durability • Clean Positive Seal • Superior tensile strength • Embossed Silicone Bead Surrounding • Resists deteriorating The Port Mr. Gasket Exhaust Gasket Set GAS 150A • Matched To Manifolds And Heads Edelbrock Intake Manifold Gasket Set EBK 7201 • High-temperature exhaust material • Withstands extreme exhaust heat • Fel-Pro performance intake manifold • Provides excellent sealing and durability gaskets have been tested with virtually • Superior tensile strength all aftermarket and intake • Resists deteriorating manifold combinations. • Performance intake manifold gaskets Mr. Gasket Exhaust Gasket Set GAS 150B designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports. • Withstands intense exhaust heat • No exhaust crossover openings or blocking shields • Resists deteriorating • Printoseal elastomeric sealing beads to provide extra sealing strength around • Easy removal for disassembly the intake port. • Not intended for use in emission controlled vehicles. Mr. Gasket Aluminum Exhaust Gasket GAS 7402G Felpro High Performance Intake Manifold Gasket Set FEL 1205

• Fel-Pro performance intake manifold • Withstands intense exhaust heat gaskets have been tested with virtually • Resists deteriorating all aftermarket cylinder head and intake • Easy removal for disassembly manifold combinations. • Performance intake manifold gaskets Mr. Gasket Aluminum Exhaust Gasket GAS 7401G designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports. • No exhaust crossover openings or blocking shields • Made from high temp acrylic blend exhaust • Printoseal elastomeric sealing beads to provide extra sealing strength around material the intake port. • Provides excellent sealing and durability • Not intended for use in emission controlled vehicles. • Can be trimmed if necessary for modified port app Felpro High Performance Intake Manifold Gasket Set FEL 1206 Mr. Gasket Exhaust Gasket Set GAS 153

PERFORMANCE PARTS • High-temperature exhaust material • Withstands extreme exhaust heat • Provides excellent sealing and durability HEADERS • Superior tensile strength • Resists deteriorating • Fuel Economy From The Engine • Leak Test For Max Performance Mr. Gasket Exhaust Gasket Set GAS 150 • Mandrel-Formed Power Plenum • Leakproof O-Ringed Port Seals • Include All Mounting Hardware • Performance exhaust header gasket Flowtech Standard Header HOL 11500FLT consisting of a high-density fiber facing material attached to both sides of a perforated steel core. • Resists blowout and burnout from high- • Fuel Economy From The Engine temperature exhaust and is far stronger than basic paper gaskets. • Leak Test For Max Performance • Anti-stick coating permits motion without damaging the gasket and makes it • Mandrel-Formed Power Plenum easier to remove the gasket for future engine service. • Leakproof O-Ringed Port Seals • Slotted bolt holes allow for easier header installation. • Include All Mounting Hardware • Not intended for use in emission controlled vehicles. Flowtech Standard Header HOL 11100FLT Felpro High Performance Gasket Set FEL 1404

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 9 PERFORMANCE PARTS PERFORMANCE PARTS COLLECTOR GASKETS

• Withstands intense exhaust heat • Flowmaster's Super 44 uses the same

Performance Parts • Graphite-impregnated facing Delta Flow technology found in our larger Super • Steel expanded metal core 40 mufflers. • Superior tensile strength • The Super 44 delivers a powerful rich tone and is • Resists deteriorating the most aggressive, deepest sounding, highest performing four-inch case street muffler we've Mr. Gasket Ultra Seal; Collector & Header ever built! Muffler Gaskets GAS 5971 • Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability. Flowmaster Inc. Super 44 Muffler - 2.50 Offset In / 2.50 Offset Out - Aggressive Sound FLM 942548 • High-temperature exhaust material • Withstands extreme exhaust heat • Provides excellent sealing and durability • The Original 40 series muffler delivers an • Superior tensile strength aggressive exterior and interior tone. • Resists deteriorating • If you're looking for that original Flowmaster sound Mr. Gasket Collector/Header this is the muffler is for you. Muffler Gaskets GAS 76C • Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability. Flowmaster Inc. 40 Series Muffler - 2.50 Offset In / 2.50 Center Out - • High-temperature exhaust material Aggressive Sound FLM 42541 • Withstands extreme exhaust heat • Provides excellent sealing and durability • Superior tensile strength • The Original 40 series muffler delivers an • Resists deteriorating aggressive exterior and interior tone. Mr. Gasket Collector/Header • If you're looking for that original Flowmaster Muffler Gaskets GAS 1204C sound this is the muffler is for you. • Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability. Flowmaster Inc. 40 Series Muffler - 2.50 Offset In / 2.50 Offset Out - • Manufactured from dead soft aluminum Aggressive Sound FLM 42543 • Conform to surface irregularities • Will not shrink deteriorate blow out burn out • Ideal for race street towing or motor homes • The Original 40 series muffler delivers an • Include mounting hardware aggressive exterior and interior tone. Mr. Gasket Aluminum • If you're looking for that original Flowmaster sound Collector Gasket GAS 7421G this is the muffler is for you. • Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability. Flowmaster Inc. 40 Series Muffler - 2.25 Offset In / 2.25 Center Out - PERFORMANCE PARTS Aggressive Sound FLM 42441 EXHAUST MANIFOLD • The original Flowmaster series muffler delivers an aggressive exterior and interior tone. GASKETS • If you're looking for that original Flowmaster sound this is the muffler is for you. • Constructed of 16 gauge aluminized steel and • High-temperature exhaust material fully MIG welded for maximum durability. • Withstands extreme exhaust heat • Excellent sealing durability and torque Flowmaster Inc. 40 Series Muffler - retention 3.00 Center In / 2.50 Dual Out - • Superior tensile strength Aggressive Sound FLM 430402 Mr. Gasket Exhaust Gasket Set GAS 253 • The Original 40 series muffler delivers an aggressive exterior and interior tone. • Reusable colored tie straps • If you're looking for that original Flowmaster • Made from dead soft aluminum sound this is the muffler is for you. • Conforms easily to surface irregularities • Constructed of 16 gauge aluminized steel and • Creates a tight leak proof seal fully MIG welded for maximum durability. • Ideal for race/street/tow vehicles and motor homes Flowmaster Inc. 40 Series Muffler - 3.00 Offset In / 3.00 Offset Out - Mr. Gasket Aluminum Exhaust Gasket GAS 7410G Aggressive Sound FLM 43043

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

10 CARQUEST®Auto Parts Service Lines Catalog • The Original 40 series muffler delivers an • The Super 50 series muffler is a larger version Parts Performance aggressive exterior and interior tone. of Flowmaster's 50 series Delta Flow muffler. • If you're looking for that original Flowmaster • Originally designed for trucks and SUV's, it sound this is the muffler is for you. is also well suited to muscle and high • Constructed of 16 gauge aluminized steel and performance applications. fully MIG welded for maximum durability. • In addition, the larger case size significantly Flowmaster Inc. 40 Series Muffler - reduces interior resonance and provides a deep, rich tone along with mileage and power 2.25 Offset In / 2.25 Offset Out - gains. FLM 42443 Aggressive Sound • Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability. Flowmaster Inc. Super 50 Muffler - 2.25 Dual In / 3.00 Center Out - Mild Sound FLM 524553

• The Super 40 features Flowmaster's Delta Flow technology. • It's larger case profile provides the best of • Flowmaster's Super 44 muffler uses the same both worlds of performance and sound. Delta Flow technology found in our larger Super • The Super 40 has that deep powerful sound of 40 mufflers. the Original 40 series but with all the benefits • The Super 44 delivers a powerful rich tone of performance and low interior resonance and is the most aggressive, deepest sounding, from the Delta Flow technology. highest performing four inch case street muffler • Constructed of 16 gauge aluminized steel and we've ever built! fully MIG welded for maximum durability. • Constructed of 16 gauge aluminized steel and Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset fully MIG welded for maximum durability. Out - Aggressive Sound FLM 953047 Flowmaster Inc. Super 44 Muffler - 2.25 Offset In / 2.25 Center Out - Aggressive Sound FLM 942446

• The Original 40 series muffler delivers an aggressive exterior and interior tone. • MagnaFlow Performance Exhaust has universal • If you're looking for that original Flowmaster mufflers available for many applications in various sound this is the muffler is for you. sizes and configurations to fit your needs. • Constructed of 16 gauge aluminized steel and • Made of 100% stainless steel, these universal fully MIG welded for maximum durability. mufflers are a great addition since they not only improve your vehicle performance but also give it Flowmaster Inc. 40 Series Muffler - that show-stopping look. 3.00 Offset In / 3.00 Center Out - Aggressive Sound FLM 43041 MagnaFlow Stainless Universal Performance Muffler CAT 11226

• Free-Flowing Inner Pass Tube • Great Performance Sound • Super 10 Series 409S stainless steel, single • Ribbed Case For Durability chamber mufflers. • Low Restriction • Intended for customers who desire the loudest • Reduces Backpressure and most aggressive sound they can find. • Because these mufflers are so aggressive, they Flowtech Raptor; Turbo are recommended only for off highway use and Performance Muffler HOL 50052FLT not for street driven vehicles. • These mufflers utilize the same patented Delta Flow technology that is found in Flowmaster's other Super series mufflers to deliver maximum • Two chamber design provides a deep aggressive tone performance. • Available in 2-1/4 inch, 2-1/2 inch or 3 inch • Constructed of 16 gauge 409S stainless steel and fully MIG welded for inlet and outlet maximum durability. • High temperature metallic finish or 304 Flowmaster Inc. Super 10 Muffler 409S - 2.50 Center In / 2.50 polished stainless steel Center Out - Aggressive Sound FLM 842515 • Thrush logo embossed on muffler cover • Available in 19 inch, 21 inch, or 23 inch overall length Thrush Welded Muffler WAL 17656

• The Super 40 features Flowmaster's Delta Flow technology. • It's larger case profile provides the best of both • 100% aluminized coated shell for long life worlds of performance and sound. • Tri-flow design provides that Thrush classic • The Super 40 has that deep powerful sound of sound the Original 40 series but with all the benefits • Available in 2 inch, 2-1/4 inch, or 2-1/2 of performance and low interior resonance inch inlet and outlet from the Delta Flow technology. • Reversible for maximum flexibility • Constructed of 16 gauge aluminized steel and • Time proven spun lock heads for leak fully MIG welded for maximum durability. free seal Flowmaster Inc. Super 40 Muffler - 2.50 Dual In / Thrush Turbo Muffler WAL 17713 2.50 Dual Out - Aggressive Sound FLM 9525454

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 11 • 100% aluminized coated shell for long life • Heavy gauge shell for maximum durability • Tri-flow design provides that Thrush classic • Expandable bushings for custom applications sound • Continuous Roving Fiberglass for powerful tone • Available in 2 inch, 2-1/4 inch, or 2-1/2 and long life inch inlet and outlet • Straight through design for maximum flow • Reversible for maximum flexibility and power • Time proven spun lock heads for leak • Available stainless steel or painted free seal Walker Glasspack WAL 24201 Performance Parts Thrush Turbo Muffler WAL 17715

• Heavy gauge shell for maximum durability • Two chamber design provides a deep • Expandable bushings for custom applications aggressive tone • Continuous Roving Fiberglass for powerful tone • Available in 2-1/4 inch, 2-1/2 inch or 3 and long life inch inlet and outlet • Straight through design for maximum flow • High temperature metallic finish or 304 and power polished stainless steel • Available stainless steel or painted • Thrush logo embossed on muffler cover Thrush Glasspack WAL 24203 • Available in 19 inch, 21 inch, or 23 inch overall length Thrush Welded Muffler WAL 17655 • Heavy gauge shell for maximum durability • Expandable bushings for custom applications • Continuous Roving Fiberglass for powerful tone • 100% aluminized coated shell for long life and long life • Tri-flow design provides that Thrush classic • Straight through design for maximum flow sound and power • Available in 2 inch, 2-1/4 inch, or 2-1/2 • Available stainless steel or painted inch inlet and outlet • Reversible for maximum flexibility Thrush Glasspack WAL 24202 • Time proven spun lock heads for leak free seal • Heavy gauge shell for maximum durability WAL 17711 Thrush Turbo Muffler • Expandable bushings for custom applications • Continuous Roving Fiberglass for powerful tone and long life • Two chamber design provides a deep • Straight through design for maximum flow aggressive tone and power • Available in 2-1/4 inch, 2-1/2 inch or 3 • Available stainless steel or painted inch inlet and outlet • High temperature metallic finish or 304 Thrush Glasspack WAL 24205 polished stainless steel • Thrush logo embossed on muffler cover • Available in 19 inch, 21 inch, or 23 inch • Made from 100% polished stainless steel overall length • Reduces backpressure for increased torque and horsepower Thrush Welded Muffler WAL 17657 • Adds a deep, resonant sound • Dimensions: 2.25" inlet, 3.25" outlet, 16.25" long • 100% aluminized coated shell for long life • Adds a sweet spot to the rear of vehicle • Tri-flow design provides that Thrush classic sound DC Sports Stainless Steel Resonated Muffler • Available in 2 inch, 2-1/4 inch, or 2-1/2 with Slant Cut Tip - Fits 2.5" Inlet PLT EX-5016 inch inlet and outlet • Reversible for maximum flexibility • Time proven spun lock heads for leak free seal PERFORMANCE PARTS Thrush Turbo Muffler WAL 17702 EXHAUST TIPS • Heavy gauge shell for maximum durability • Expandable bushings for custom applications • Universal fit for most vehicles • Continuous Roving Fiberglass for powerful tone and long life • Adds a sweet spot to the rear of your vehicle • Straight through design for maximum flow • Bolt on design can be installed in minutes and power • Dimension: 2.63 In. (Inlet) x 9 In. (L) • Available stainless steel or painted Pilot Chrome Slant Cut Exhaust Tip - Thrush Glasspack WAL 24214 2.63" (Inlet) x 9" (L) PLT PMZ-017

• Heavy gauge shell for maximum durability • Expandable bushings for custom applications • Tip fits 1.75" to 2.5" /inlet 2.875" outlet 3.75" Length 9" • Continuous Roving Fiberglass for powerful tone • 100 % Stainless Steel Mirror like Polish Finish and long life • Slant Cut Tip • Straight through design for maximum flow • 3 Bolt Clamp System and power • Adds a sweet spot to the rear of vehicle • Available stainless steel or painted DC Sports Stainless Steel Bolt-On Muffler Thrush Glasspack WAL 24200 Tip - Fits 1.75" to 2.5" Pipes PLT EX-1010 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

12 CARQUEST®Auto Parts Service Lines Catalog • Fits inlets 1.5 In. to 2.75 In. in diameter • Universal fit for most vehicles Parts Performance • Resonated to enhance sound • High-quality triple chrome plating • Slant cut outlet • Bolt on design can be installed in minutes • Easy 3 bolt install, installs in minutes • Dimension: 2.25"(H) x 2.25"(W) x 9"(L) • Dimensions: 3.2 in (intake) x 3.2 in (outlet) x Pilot Chrome Down Turned Exhaust Tip 5.25 in (long) 9" x 2 1/4" PLT PMZ-019 Pilot Polished Stainless Steel Slant Cut Bolt-On Exhaust Tip PLT PM-5119

• Universal fit for most vehicles • High-quality triple chrome plating • Resonated to enhance sound • Bolt on design can be installed in minutes • Easy install, bolts on in minutes • Dimension: 2.25 In. (Inlet) x 9 In. (L) • Polished silver finish Pilot Chrome Rolled End Exhaust Tip - • Made from stainless steel 2.25" Inlet x 9" Length PLT PMZ-022 • Adds a sweet spot to the rear of vehicle DC Sports Stainless Steel Bolt-On Muffler Tip PLT EX-1013 • Universal fit, chrome plated exhaust tip • Crafted from triple chrome plated steel • Clamp on design can be installed in minutes • Tip fits 1.75" to 2.5" /inlet 2.875" outlet 3.75" using basic hand tools Length 9" • A hose clamp can be used for added security, • 100 % Stainless Steel Mirror like Polish Finish or the tip can be permanently welded on • Straight Cut Tip • Adds a sweet spot to the rear of vehicle • 3 Bolt Clamp System Pilot Triple Chrome Steel 9" X 2.125" • Adds a sweet spot to the rear of vehicle Square Exhaust Tip - Universal Fit PLT PMZ-007 DC Sports Stainless Steel Bolt-On Muffler Tip - Fits 1.75" to 2.5" Pipes PLT EX-1011

• Tip fits 1.75" to 2.50" /inlet 2.875" outlet 3.75" 9" long • Tip fits 1.50" to 2" /inlet 2.25" outlet 3.75" Length 9" • Black Coated Finish • 100 % Stainless Steel Mirror like Polish Finish • Slant Cut Tip • Slant Cut Tip • 3 Bolt Clamp System • 3 Bolt Clamp System Pilot Muffler Tip PLT PMB-1010 • Adds a sweet spot to the rear of vehicle DC Sports Stainless Steel Bolt-On Muffler Tip PLT EX-1012 PERFORMANCE PARTS

• Tip fits 2.75" to 3.5" /inlet 2.875" outlet 4.00" 14" long CARBURETORS • 100 % Stainless Steel polished to a mirror-like finish • Slant cut tip • Burnished Aluminum • 3-bolt clamp system installs in minutes • GM/AMC-Style Throttle Linkage • Adds a sweet spot to the rear of vehicle • Electric Choke Installed from Factory DC Sports Resonated Stainless Steel • Easy Tuning with 2-Piece Design • Smooth Secondary Transition Slant Cut Muffler Tip PLT EX-1015 Edelbrock Performer Series; Carb EBK 1406

• Easy 3-bolt clamping system installs in minutes • Fits: 1.5" - 2.25" pipe • Burnished Aluminum • Polished stainless steel finish • GM/AMC-Style Throttle Linkage • Slant cut outlet • Can Add Electric Choke PN[1478] • Adds a sweet spot to the rear of vehicle • Easy Tuning with 2-Piece Design DC Sports Stainless Steel Universal Fit • Smooth Secondary Transition Dual Exhaust Tip - Slant Cut PLT EX-2012 Edelbrock Performer Series; Carb EBK 1405

• Universal fit for most vehicles • High-quality triple chrome plating • Burnished Aluminum • Bolt on design can be installed in minutes • GM/AMC-Style Throttle Linkage • Dimension: 2.5 In. (Inlet) x 8.25 In. (L) • Electric Choke Installed from Factory Pilot Chrome Down Turned Exhaust Tip - • Easy Tuning with 2-Piece Design 2.5" Inlet x 8.25" Length PLT PMZ-020 • Smooth Secondary Transition Edelbrock Performer Series; Carb EBK 1411

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 13 • Burnished Aluminum • High-temperature composite gasket material • GM/AMC-Style Throttle Linkage • Precision die cut for excellent seal and fit • Electric Choke Installed from Factory • Provides excellent torque retention • Easy Tuning with 2-Piece Design • Can be trimmed if necessary • Smooth Secondary Transition Mr. Gasket Carburetor Base Gasket GAS 55C Edelbrock Performer Series; Carb EBK 1403 Performance Parts

• Made from cellulose/nitrile composition • Burnished Aluminum • Provides excellent sealing and durability • GM/AMC-Style Throttle Linkage • Can be trimmed if necessary • Can Add Electric Choke PN[1478] • 1/16 in. & 1/4 in. material available • Easy Tuning with 2-Piece Design • Smooth Secondary Transition Mr. Gasket Carburetor Base Gasket GAS 56C Edelbrock Performer Series; Carb EBK 1407

• Heat-treated nitrile rubber • Comply w/U.S. Coast Guard Safety • Precision die cut Standards • Teflon Coated Shafts/Pump Arm For Max. Mr. Gasket Carburetor Base Gasket GAS 57C Protection Edelbrock Performer Series; Marine Carb EBK 1409

• Heat-treated nitrile rubber • Precision die cut Mr. Gasket Carburetor Base Gasket GAS 49C • Street Carburetor Holley Street Carburetor HOL 0-80457S

• Adjustable Vacuum Secondary • This stud has a black oxide coating • 4th Generation Power Valve • Fine threads on one end fits most intakes • Fuel Metering System • Bullet nose makes Carb installation easy • Built-In Secondary Fuel Filters • Has zinc coated nuts and washers • External Float Adjustable w/Sight Plug Mr. Gasket Carburetor Studs Holley Street Avenger; Carburetor HOL 0-80670 GAS 6345G

• 625 CFM air flow - ideal for use on most stock to mildly modified V8s • Dual mounting bolt pattern - fits most aftermarket • Fits up to 1-3/4 in. spacers spread/square bore intake manifolds without • Made of zinc coated steel adapter • 5/16-24 and 5/16 x 16 threads • Electric Choke Management means easy cold starts • 4 each per set • Single fuel inlet for simple installation Mr. Gasket Carburetor Studs GAS 62 • Integrated fuel bowl/main body design with gasket above fuel level and no plugged passages to eliminate all potential leak paths Demon Carburetion Street DeMon 4-Barrel 625 CFM Carburetor HOL 1900 • Features bullet nose for ease of installation • Made of steel • Has a black oxide coating PERFORMANCE PARTS • Coating resists corrosions • Extra long 2 in. CARBURETOR KITS Mr. Gasket Carburetor Studs GAS 6346G

• High-temperature composite gasket material • Precision die cut for excellent seal and fit • Assures added safety • Provides excellent torque retention • Electro-nickel plated • Can be trimmed if necessary • Resists rust Mr. Gasket Carburetor Base Gasket GAS 54C • Chrome plated bracket Mr. Gasket Universal Dual Throttle Return Spring Kit GAS 19

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

14 CARQUEST®Auto Parts Service Lines Catalog • The Edelbrock #12760 4150 Carburetor Parts Performance • Stainless steel braided - looks great rebuild kit is for Holley, Demon and Quick • Eliminate sticky gas pedal Fuel Carburetors. • Quick and easy installation • The kit comes with the necessary Mr. Gasket Steel Braided Throttle components to rebuild a 4150 style Cable Kit GAS 5657 Carburetor. Edelbrock Rebuild & Maintenance Kit for Most 4150-Style Carburetors EBK 12760 • Fits Both 2 And 4 Barrel Applications • 6 ft. Length • Stainless Steel Outer Sleeve • Incl. Parts To Rebuild Edelbrock Square-Bore • Polished Knob w/Engraved Edelbrock Logo Carbs • Nice Way To Finish Off Any Carburetor Installation Edelbrock Performer Series; Edelbrock Universal Carburetor Choke Carb Rebuild Kit EBK 1477 Cable EBK 8013

• The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors. • Chrome plated • Kit includes two black nitrile fuel bowl gaskets. • Auto Transmission kick down cable bracket included Edelbrock Fuel Bowl Gasket for 2300, • Fits mot 2bbl and 4bbl Carbureted applications 4150, 4160, 4175 and 4500 Series • Fits most 2, 3 or 4 bbl throttle body applications Carburetors (Qty 2) EBK 12382 Mr. Gasket Chrome Plated Throttle Cable Bracket GAS 6039

• The Edelbrock #12380 Metering Block gasket is made of black nitrile material and will ensure a leak-free seal • Throttle cable adapter from your Carb to the metering block. • For Chevy • The Edelbrock #12380 Metering Block gasket will fit 4150 &4160 Carburetors. Edelbrock Performer Series Throttle • These will not work with accelerator pump Cable Adapter - GM EBK 8009 transfer tubes. Edelbrock Metering Block for 4150 & 4160 Series Carburetors (Qty 2) EBK 12380

• Quick and Easy Installation • The Edelbrock #12602 Adjustable Inlet Needle and • Diecast Aluminum Adapters Seat assembly will fit Carburetors with center hung • Includes Gaskets and Studs fuel bowls and can be used as replacements or • Including Nuts and Washers performance upgrades. Mr. Gasket Carburetor Adapter Kit • Kit includes one locking screw, two gaskets and GAS 1932 one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors. Edelbrock Adjustable Inlet Needle with Viton Tip - 0.097" EBK 12602 • Quick and Easy Installation • Diecast Aluminum Adapters • Includes Gaskets and Studs • Automatic Transmission Kickdown Stud • Including Nuts and Washers Edelbrock Automatic Transmission Mr. Gasket Carburetor Adapter Kit Kickdown Stud EBK 8018 GAS 1933

• The Edelbrock #12413 Carburetor Throttle Ball • The Edelbrock #12750 4160 Carburetor Assortment comes with 4 different Carburetor rebuild kit is for Holley, Demon and Quick ball studs, supplied with hardware. Fuel Carburetors. • The kit comes with the necessary Edelbrock Carburetor Throttle Ball components to rebuild a 4160 style Assortment EBK 12413 Carburetor. Edelbrock Rebuild & Maintenance Kit for Most 4160-Style Carburetors • Edelbrock Part # 8026 GM Transmission EBK 12750 adapter is for use with 2004R, 700R4, 4L60 transmissions. • This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve • Mounts Edelbrock Carbs to Spreadbore style transmission (700R4, 2004R, 4L60). Intakes • The pin location is critical as the TV controls line • 0.850 in. Thick pressure, shift points, shift firmness, and part Edelbrock Performer Series; throttle downshifts. Carb Adapter EBK 2696 Edelbrock GM Transmission Adapter For Use With 2004R, 700R4, 4L60 Transmissions EBK 8026

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 15 • The Edelbrock #12665 Single Stage 6.5 Hg • Tumble Polished Billet Look Power Valve operates by using engine vacuum • Lower Housing Casting to control the opening and closing rate. • Enhanced Fuel Flow • During heavy load or under full power • Pressure Is Pre-Set At 7 psi situations, they open to supply additional fuel • Motor Draws 2 Amps Current to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power Holley Electric HOL 12-802-1 Performance Parts without any drivability concerns. Edelbrock Standard Flow Single-Stage Power Valve 6.5" Hg EBK 12665 • Tumble Polished Billet Look • The Edelbrock #12645 Single Stage 5.5 Hg • Lower Housing Casting Power Valve operates by using engine vacuum • Enhanced Fuel Flow to control the opening and closing rate. • Pressure Is Pre-Set At 7 psi • During heavy load or under full power • Motor Draws 2 Amps Current situations, they open to supply additional fuel Holley Electric Fuel Pump HOL 12-801-1 to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns. Edelbrock Standard Flow Single-Stage Power Valve - • High Output Fuel Flow 5.5" Hg EBK 12655 • Flows 110 GPH/Free Flow • Shutoff Pressure Pre-Set At 6.5-8 PSI • Heavy Duty Const. For High RPM Operation • The Edelbrock #12645 Single Stage 4.5 Hg • Fuel Body Casting Can Be Rotated Power Valve operates by using engine vacuum Holley Mechanical Fuel Pump HOL 12-327-11 to control the opening and closing rate. • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and • Street Performance bogging, ensuring the smooth delivery of power • Flows 80 GPH/Free Flow without any drivability concerns. • Shutoff Pressure Pre-Set At 7.5 PSI Edelbrock Standard Flow Single-Stage Power Valve - • Heavy Duty Const. For High RPM Operation 4.5" Hg EBK 12645 • Fuel Body Casting Can Be Rotated Holley Mechanical Fuel Pump HOL 12-834 PERFORMANCE PARTS PERFORMANCE PARTS FUEL PUMPS FUEL SYSTEM ACCESSORIES • Lightweight tubing with bronze tip for steel cams • 5.75" Length • Ideal for custom engine • Eliminates wear at the fuel pump lobe often caused by a • Ideal for performance engine stock fuel pump pushrod • Polished chrome plating Competition Cams Bronze Tip Fuel Pump • Compliment other accessories • Safety bead for retention Pushrod for Steel Cam PCC 4607 Mr. Gasket Chrome Plated Canister GAS 9746

• Quick viewing of fuel flow and trapped debris • Good Up To 300 Horsepower • Chrome plated leak proof housing ends • Quiet Operation • 100 micron element for maximum fuel flow • Reliable Solid State Design • Replaceable washable filter element • Self Priming And Regulating • Easy no hassle type installation • Simple 2 Wire Hookup Mr. Gasket Clearview Fuel Filter GAS 9706 Holley Mighty Might Electric Fuel Pump HOL 12-427

• Easily select pressure settings • Easy - quick installation • Good Up To 300 Horsepower Mr. Gasket Fuel Regulator GAS 9710 • Quiet Operation • Reliable Solid State Design • Self Priming And Regulating • Simple 2 Wire Hookup • Fuel pressure gauge • 0 to 15 PSI Holley Mighty Might Electric • Liquid Fuel Pump HOL 12-426 Mr. Gasket Fuel Pressure Gauge GAS 1561

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

16 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance • 8 piece kit PERFORMANCE PARTS • Socket head • Chrome plated grade 8 steel 3 GAUGE KITS Mr. Gasket Chrome Plated Pipe Plug Set GAS 6352G • Includes Oil/Water temperature (FST 8207), Electrical Voltmeter (FST 8205), and Mechanical Oil Pressure (FST 8206) • Standard 2" white dials for 2-1/16" • Helps keep Carburetor clean opening • This is a 5 micron filter • Features chrome bezel with removable Mr. Gasket Replacement Element chrome mounting panel • Includes 12 Volt internal backlighting For Clearview Fuel Filter GAS 896G • Includes 72" high temperature nylon tubing with 1/8" and 1/4" NPT thread fittings Bosch Gauges Style Line 2" Triple Gauge Kit (White Face) CPS FST8208 • Chrome plated steel • Comes with gasket • Includes Oil/Water temperature (FST Mr. Gasket Fuel Pump Block-Off Plate 8207), Electrical Voltmeter (FST 8205), GAS 1515 and Mechanical Oil Pressure (FST 8206) • Standard 2" white dials for 2-1/16" opening • Adjustable fuel line • Features chrome bezel with removable • Dual feed side inlet fittings chrome mounting panel • Neoprene rubber hose • Includes 12 Volt internal backlighting • Flexible braided hose cover • Includes 72" high temperature nylon tubing with 1/8" and 1/4" NPT thread • Includes port and plug fittings Mr. Gasket Adjustable Fuel Line Bosch Gauges Style Line 2" Triple Gauge Kit (Black Face and GAS 1556G Bezel) CPS FST8218

• Made from high quality material • Includes Mechanical Oil/Water • Ensure long lasting durability Temperature, Electrical Voltmeter, and • Stainless steel braids Mechanical Oil Pressure gauges • Includes clamps • Popular mini gauges packaged conveniently for easy installation Mr. Gasket Steel Braided Fuel Line Kit GAS 1526 • Standard 1-1/2" black dials • Features black bezel with removable black mounting panel • The Edelbrock Accelerator Pump Diaphragm 30cc • Includes 12 Volt internal backlighting Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Bosch Gauges Style Line 1-1/2" Mini Triple Gauge Kit CPS FST8090 • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage • Includes Mechanical Oil/Water Edelbrock Accelerator Pump Diaphragm Temperature, Electrical Voltmeter, and 30cc EBK 12400 Mechanical Oil Pressure gauges • Popular mini gauges packaged conveniently for easy installation • Standard 1-1/2" white dials • For Edelbrock Square-Bore Carbs • Features chrome bezel with removable • Also Fit Carter AFB Carbs chrome mounting panel • Re-Routes Fuel Line 90 Degrees • Includes 12 Volt internal backlighting • For More Air Cleaner Clearance • Use with Manual Choke Carbs Bosch Gauges Style Line 1-1/2" Mini Triple Gauge Kit CPS FST8092 Edelbrock Performer Series; Banjo Fitting EBK 8089 PERFORMANCE PARTS PERFORMANCE PARTS BOOST GAUGE MULTI DIGITAL OBD • 1 - 30 in. Hg Vacuum scale, 0 - 20 PSI Boost with 270 degree dial sweep • ScanGauge II can help you monitor your vehicle's most vital systems • Standard 2" black dial for 2-1/16" opening and provide the kind of real-time information you've been missing. • Features black bezel with removable black mounting • Features include more than 15 built-in digital gauges, 5 sets of trip panel data and an easy-to-use ScanTool that shows • Includes 12 Volt internal backlighting both set and pending trouble codes. • Includes 72" high temperature nylon tubing with 1/8" • All in an ultra compact design that installs in and 1/4" NPT thread fittings minutes. • Changeable multi-color display. Bosch Gauges Style Line 2" Mechanical Vacuum/Boost Gauge (Black Face) CPS FST8213 ScanGauge II Digital Trip Monitor LLG SG2

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 17 PERFORMANCE PARTS PERFORMANCE PARTS BOOST GAUGE TUBING TEMP GAUGES

• For use with our mechanical pressure or • Range of 100-250 Fahrenheit with 270 degree dial

Performance Parts mechanical boost gauges sweep • 1/8" and 1/4" NPT engine fittings • Standard 2" black dial for 2-1/16" opening • 1/8" NPT gauge fitting • Features black bezel with removable black mounting • 72" of high temperature nylon tubing panel • If metric is needed for your application, • Includes 12 Volt internal backlighting use adapter kit FST 7573 • Includes 72" high temperature nylon tubing with 1/2" and 1/4" NPT thread fittings Bosch Gauges Nylon Tubing Kit CPS FST7554 Bosch Gauges Style Line 2" Mechanical Water/ Oil Temperature Gauge (Black Face) CPS FST8217 • For use with our mechanical pressure or mechanical boost gauges • 1/8" and 1/4" NPT engine fittings • Range of 100-250 Fahrenheit with 270 degree dial • 1/8" NPT gauge fitting sweep • 72" of soft copper tubing • Standard 2" white dial for 2-1/16" opening • If metric is needed for your application, use • Features chrome bezel with removable chrome mounting adapter kit FST 7573 panel Bosch Gauges Copper Tubing Installation Kit • Includes 12 Volt internal backlighting CPS FST7584 • Includes 72" high temperature nylon tubing with 1/2" and 1/4" NPT thread fittings Bosch Gauges Style Line 2" Mechanical Water/ PERFORMANCE PARTS Oil Temperature Gauge (White Face) CPS FST8207 TACHOMETERS PERFORMANCE PARTS

• 0-8000 RPM Range, driven by Air Core motor VOLT GAUGES • 2-5/8" black dial face with 250 degree sweep • Black bezel with mounting hardware • Range of 8 to 18 volts with a 60 degree sweep • Adjustable pointer • Standard 2" black dial for 2-1/16" opening • Compatible with 4, 6, and 8 cylinder engines • Features black bezel with removable black mounting panel Bosch Gauges Sport II 2-5/8" Tachometer • Includes 12 Volt internal backlighting (Black Face) CPS FST7906 • Requires hook up wire Bosch Gauges Style Line 2" Electrical Voltmeter Gauge (Black Face) CPS FST8215 • 0-8000 RPM Range, driven by Air Core motor • 3-3/8" white dial face with 250 degree sweep • Chrome bezel with mounting hardware • Adjustable redline pointer • Range of 8 to 18 volts with a 60 degree sweep • Compatible with 4, 6, and 8 cylinder engines • Standard 2" white dial for 2-1/16" opening • Features chrome bezel with removable chrome mounting Bosch Gauges Sport II 3-3/8" Tachometer panel (White Face) CPS FST7903 • Includes 12 Volt internal backlighting • Requires hook up wire • 0-8000 RPM Range, driven by Air Core motor Bosch Gauges Style Line 2" Electrical • 3-3/8" black dial face with 250 degree sweep Voltmeter Gauge (White Face) CPS FST8205 • Chrome bezel with mounting hardware • Adjustable redline pointer • Compatible with 4, 6, and 8 cylinder engines Bosch Gauges Sport II 3-3/8" Tachometer PERFORMANCE PARTS (Black Face) CPS FST7901 OIL PRESSURE GAUGES • 0-10,000 RPM Range, driven by vibration proof, Air Core meter • Large 5" black dial face • Range of 0-100 PSI with a 270 degree sweep • Compatible with 2, 4, 6, and 8 cylinder engines • Standard 2" black dial for 2-1/16" opening • Pointer return to Zero feature • Features black bezel with removable black mounting • Adjustable swivel mounting foot for mounting at any panel angle • Includes 12 Volt internal backlighting • Includes 72" high temperature nylon tubing with 1/8" Bosch Gauges Sport ST 5" Tachometer CPS FST7900 and 1/4" NPT thread fittings Bosch Gauges Style Line 2" Mechanical Oil Pressure Gauge (Black Face) CPS FST8216

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

18 CARQUEST®Auto Parts Service Lines Catalog • Range of 0-100 PSI with a 270 degree sweep • Heavy Duty Cap and Rotor Kit Parts Performance • Standard 2" white dial for 2-1/16" opening • With Brass Inserts • Features chrome bezel with removable chrome mounting Accel Cap And Rotor Kit panel GAS 8233 • Includes 12 Volt internal backlighting • Includes 72" high temperature nylon tubing with 1/8" and 1/4" NPT thread fittings Bosch Gauges Style Line 2" Mechanical Oil Pressure Gauge (White Face) CPS FST8206 • Features Protection From Arc Thru And Crossfire • Features 60k V Rated Alkyd Compound • Stanless Steel Terminals Inserts And Steel Rotor Springs PERFORMANCE PARTS • High Spark Energy Flow ALTERNATORS Accel Dust Cap & Rotor GAS 8139

• A manufacturing break-through has enabled PROFORM to offer 100% NEW alternators with the same affordability as our popular re-built models! • Racing Distributor Rotor • Each unit is supplied with its own individual Quality • Standard Height Rotor Assurance graph documenting its performance and is easily identified by the machined pulley. Accel Distributor Rotor GAS 130141 Proform 100% New, Chrome 1-Wire Alternator, GM 100 Amp STY 66445.1N

• Continuous amp rating of 20 amps at 12 volts • Heavy Duty Cap and Rotor Kit • Momentary rating of 125 amps at 12 volts • With Brass Inserts • Splices into battery cable Accel Distributor Cap And Rotor Kit Mr. Gasket Master Disconnect Switch GAS 6276 GAS 8234 PERFORMANCE PARTS • High Performance Distributor Cap Accel Distributor Cap GAS 120141

• High-torque, gear-reduction design. • 100% NEW, not rebuilt. • Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. • High Performance Distributor Cap • The high-torque, high-output motor spins the engine Accel Distributor Cap GAS 120142 over faster than stock starters, delivering 40-50% more cranking power. • 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Proform High Torque Starter Chevy V6, S/B & B/B V8 Engines 12 V 14 Kw Motor, 11:1 Comp STY 66256 • Parts are molded from high quality voltage insulating materials • Resists Carbon tracking while ensuring that the ignition spark reaches the terminals • Low resistance brass is used for maximum PERFORMANCE PARTS voltage transfer • Performance replacement part CAPS & ROTORS MSD Ignition Distributor Cap/Rotor, GM HEI, Red MSD 8416

• Heavy Duty Cap and Rotor Kit • With Brass Inserts Accel Distributor Cap And Rotor Kit • Parts are molded from high quality voltage insulating GAS 8122 materials • Resists Carbon tracking while ensuring that the ignition spark reaches the spark plug terminals • Low resistance brass is used for maximum voltage • Heavy Duty Cap and Rotor Kit transfer • With Brass Inserts • Performance replacement part Accel Distributor Cap And Rotor Kit MSD Ignition Distributor Cap/Rotor Kit, Ford MSD 8482 GAS 8132

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 19 PERFORMANCE PARTS • 30,000 Volts. Direct OEM replacement. • Optimized coil design yields at least 15% more energy available for the spark than the COILS most common OEM coils. • Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals Performance Parts • SuperStock Canister Style Coil for added current conduction. • Higher Energy Output • Moisture resistant construction ensures long • Quicker Starting life in harsh environments. High-temp boot • Improved Throttle Response sustains seal and form. Epoxy molded for • Higher RPM Power shock and vibration resistance. Accel Super Stock Coil GAS 8140 PerTronix 30728 Flame-Thrower Coil 1998-2008 Ford 4.6L/5.4L/6.8L Modular 2-Valve COP (Coil On Plug) Set of 8 PRX 30728

• 30,000 Volts. Direct OEM replacement. • SuperStock Canister Style Coil • Optimized coil design yields at least 15% more energy available • Higher Energy Output for the spark than the most common OEM coils. • Quicker Starting • Provides the spark energy throughout the RPM range and with • Improved Throttle Response no energy degradation up to 11,000 engine RPMs. Plated • Higher RPM Power Copper terminals for added current conduction. • Moisture resistant construction ensures long life in harsh Accel Super Stock Coil GAS 8140C environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance. PerTronix 30731 Flame-Thrower Coil 2004-2008 Ford • Super Coil 4.6L/5.4L Modular 3-Valve COP (Coil On Plug) PRX 30731 • Optimized Low Resistance • Silicon Magnetic Steel E-Core • Higher Energy/Voltage Outputs • Quicker Starts Accel Super Coil GAS 140012 • PerTronix 40011 Flame-Thrower Coil 40,000 Volt 1.5 ohm Black • 40,000 volts. • Remote Mount Ignition Coil • Higher Energy/Voltage Outputs PerTronix 40011 Flame-Thrower Coil 40,000 Volt 1.5 ohm Black PRX 40011 • Quicker Starts • Improved Throttle Response • More High RPM Power Accel Remote Mount Super Coil GAS 140011

• Super Coil Ignition Coil PERFORMANCE PARTS • Higher Energy Output • More High RPM Power • No Need To Remove Distributor • Resist Shock And Vibration Accel Super Coil GAS 140003 • High Performance 4 Pin Module • Steel Alloy Drive Gear • Compatible w/Flat Or Hydraulic Roller Cam • Low resistance and improved turns ratio produces a powerful • All New Components spark for improved performance • Regain Horsepower And Economy • Special windings and high voltage output; does not include a Accel Performance Replacement; Distributor ballast resistor GAS 59107C • Sturdy metal housing is finished in red • OBD II and Carb approved; legal for use in all states; D-40-37 MSD Ignition Blaster 2 Coil MSD 8202

• 30,000 Volts. Direct OEM replacement. • Optimized coil design yields at least 15% more energy available • All new components, including the coil, spec'd by MSD for the spark than the most common OEM coils. engineers • Provides the spark energy throughout the RPM range and with no • The only value priced HEI with a full one year warranty energy degradation up to 11,000 engine RPMs. Plated Copper • Heavy duty distributor gear for durability terminals for added current conduction. • Welded weight pins and heavy duty construction • Moisture resistant construction ensures long life in harsh • Adjustable vacuum advance helps tune it to each engine environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance. MSD Ignition Distributor, Chevy HEI, Street Fire MSD 8362 PerTronix 30721 Flame-Thrower Coil 1998-2008 Ford 4.6L/5.4L/6.8L 2- Valve COP (Coil On Plug) PRX 30721

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

20 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance • Fits GM HEI V8 Dist w/Internal Coil • Chrome plated steel • Black Cap • Fits most stock designs Chevrolet Performance Engine • Universal horizontal mount Distributor Tune-Up Kit STY 141-796 • Includes mounting bracket bolt and nut Mr. Gasket Universal Coil Cover GAS 9777 PERFORMANCE PARTS • Fits Chevy small and big block V8 and 200 229 V6 • Ideal for magneto distributors IGNITION ACCESSORIES • Chrome plated steel Mr. Gasket Competition Distributor • Abs heat resistant plastic Clamp GAS 6197 • Solid black w/no logo • Fits 7mm or 8mm wires • For street or competition Mr. Gasket Competition Wire • Works on 7mm and 8mm ignition wire Separator Kit GAS 9728 • Guide for stripping wire • Use in vice to crimp HEI and points style terminals • Inexpensive alternative to more expensive crimping tools • ABS plastic GAS 170040 • Heat resistant Accel Wire Crimper Tool - 7mm & 8 mm • Fits 7mm and 8mm wires • For competition and street use Mr. Gasket Competition Wire Separator Kit GAS 9727 • Fits 1974-79 GM HEI distributors with e-clips • Includes detailed instructions • Weights springs center plate and nylon • Chrome plated for great looks bushings • Fits 7/8mm wires Mr. Gasket HEI Advance Curve Kit GAS 929G Mr. Gasket Competition Style Wire Loom Kit GAS 9880

• With soft touch rev control • Higher output with 530 primary volts and 135mj of spark energy • Efficient components use less current to • Chrome plated steel loom set produce more power • Chrome plated dividers • Set an RPM limit on the 6AL with two • Includes rubber grommets rotary dials • Same bolt pattern as the original 6AL with a lower profile housing Mr. Gasket Four Wire Loom Set GAS 9751 MSD Ignition Digital 6AL Ignition, with Rev Limiter MSD 6425

• Fits tall valve covers • Chrome plated steel • Each dividers holds 4 wires • PerTronix 1281 Ignitor Ford 8 cyl • Packaged in pairs • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug Mr. Gasket Four Wire Loom Set GAS 9753 life. PerTronix 1281 Ignitor Ford 8 Cyl PRX 1281

• Black oxide coating • Grade 8 steel • Nuts are included • PerTronix 1181 Ignitor Delco 8 cyl • Washer are included when required • Delivers twice the voltage to the spark • Has 3 bolts per set plugs, increasing horsepower, fuel Mr. Gasket Torque Converter To Flex Plate Bolts economy, and spark plug life. GAS 6716 PerTronix 1181 Ignitor Delco 8 Cyl PRX 1181

• PerTronix D2000 Flame-Thrower HEI GM 4 Pin Module • HEI Battery/Tach Pigtail • Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved Accel HEI Battery/Tach Pigtail GAS 170072 reliability. PerTronix D2000 Flame-Thrower HEI GM 4 Pin Module PRX D2000

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 21 PERFORMANCE PARTS • 8mm Spiral • Stainless Steel Spark Plug Terminals • Double Silicone Construction SPARK PLUG WIRES • Fiberglass Braid • Spiral Wound Stainless Steel Alloy Conductor Accel Universal Fit Super Stock Performance Parts • 8mm Copper Wire Core 8mm Spiral; Spark Plug Wire • Silicone Spark Plug Boots Set GAS 5040R • Zinc-Plated Terminals • 450 Degree Silicone and EPDM Rubber Accel Custom Fit Super Stock; Spark Plug Wire Set GAS 4048 • 8mm Spiral • Stainless Steel Spark Plug Terminals • Double Silicone Construction • Fiberglass Braid • Replacement For One Wire • Spiral Wound Stainless Steel Alloy Conductor • Yellow; Carbon/Graphite Core Accel Universal Fit Super Stock • Dielectric Grease Included 8mm Spiral; Spark Plug Wire • Includes Boots and Terminals Set GAS 5041R • Male/Female Distributor Towers Accel Universal Coil Leads GAS 170500R

• 8mm Copper Wire Core • Silicone Spark Plug Boots • Replacement For One Wire • Zinc-Plated Terminals • Yellow; Carbon/Graphite Core • 450 Degree Silicone and EPDM Rubber • Dielectric Grease Included • Carbon Conductive Material • Includes Boots and Terminals Accel Universal Fit Super Stock 8mm • Male/Female Distributor Towers Suppression; Spark Plug Wire Set Accel Universal Coil Leads GAS 170500 GAS 4041

• Helically wound conductor suppresses electro & • Suppression Core radio noise • Universal Fit • Kevlar core combination for great strength Accel Universal Fit Super Stock & durability 7mm Copper; Spark Plug Wire • Heavy duty terminals for secure connection Set GAS 3008 • 8 mm silicone and synthetic jacket resists heat and abrasion • 500 ohms per foot resistance for improved spark delivery and power • 8mm Copper Wire Core MSD Ignition Street Fire Plug Wire Set • Silicone Spark Plug Boots MSD 5551 • Zinc-Plated Terminals • 450 Degree Silicone and EPDM Rubber • Helically wound conductor suppresses electro and Accel Custom Fit Super Stock; radio noise Spark Plug Wire Set GAS 4056 • Kevlar core combination for great strength and durability • Heavy duty terminals for secure connection • 8 mm silicone and synthetic jacket resists heat • 8mm Copper Wire Core and abrasion • Silicone Spark Plug Boots • 502 ohms per foot resistance for improved spark • Zinc-Plated Terminals delivery and power • 450 Degree Silicone and EPDM Rubber MSD Ignition Street Fire Plug Wire Set MSD 5553 • Carbon Conductive Material Accel Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set GAS 4040 PERFORMANCE PARTS HEADER PLUGS

• 8mm Copper Wire Core • Header-Box Image Shown: 8199 • Silicone Spark Plug Boots • U-Groove Ground Electrode • Zinc-Plated Terminals • Five-Rib Aluminum Insulator • 450 Degree Silicone and EPDM Rubber • Copper Core Nickel/Chrome Steel Accel Custom Fit Super Stock; • Electric Heat Seal Spark Plug Wire Set GAS 4049 Accel U-Groove Header Plugs, 8 Pack GAS 8198 Accel U-Groove Header Plugs, 8 Pack GAS 8199

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

22 CARQUEST®Auto Parts Service Lines Catalog PERFORMANCE PARTS PERFORMANCE PARTS Parts Performance SHIFTERS ENGINE MOUNTS

• Base Trims To Custom Fit Floor • Gains Both Performance and Longevity • NHRA and IHRA Reverse Lockout Meets Requirements • Will Handle Any and All Torque • Includes Neutral Safety Switch • Out Lasts Rubber • Includes Backup Light Switch Energy Suspension Motor Mount PPS 3.1114G • Includes Black T-Handle and Cable B & M Automatic Shifter, Z-Gate BMA 80681 • Unique Safety Interlock Design • TCI engineers have developed the new FAST-GATE Shifter to be • Impervious to Vehicle Oils and Chemicals universal in design, allowing it to be used in virtually any 3- or • Strong Enough Too Handle High Performance 4-speed application, either street or race. Energy Suspension Transmission • The FAST-GATE Shifter also includes a stylish and durable Mount PPS 3.1108G injection molded cover, cable and all required hardware for a simple installation. • There is no need to buy extra accessory pieces. • The TCI FAST-GATE Shifter's sturdy construction is capable of withstanding the demands of racing, yet PERFORMANCE PARTS looks classy in most street applications. • The stamped components ensure smooth, accurate movements when shifting, and the reverse lockout mechanism eliminates the chance of SUSPENSION transmission damage from accidentally shifting into reverse. TCI FAST-GATE Shifter PCC 616541 • Easy to Install • Increase Efficiency • Superior Performance and Greater Longevity • Last Much Longer Than OEM Rubber End Links PERFORMANCE PARTS Energy Suspension Heavy Duty Sway Bar End Link Set PPS 9.8105R SHIFTER ACCESSORIES • Made from HYPER-Flex Polyurethane • Black rubber boot • Allows Vehicle to Work At Maximum Efficiency • Chrome plated steel ring • Easy to Install • Comes with screws • Superior Performance and Greater Longevity • Fits most applications • Lasts Much Longer Than OEM Rubber End Links Mr. Gasket Shifter Boot GAS 9648 Energy Suspension Sway Bar End Link Kit PPS 9.8117R

• Polished aluminum with black insert • Made from HYPER-Flex Polyurethane • Bushings for different size sticks • Allows Vehicle to Work At Maximum • Has set screw included in package Efficiency • Has indentions to fit your fingers • Easy to Install Mr. Gasket Competition Gear Shift Handle GAS 9624 • Superior Performance and Greater Longevity • Lasts Much Longer Than OEM Rubber End Links • Fits Most B&M Shifters Energy Suspension Sway Bar End Link Kit PPS 9.8121R • Fits Most Aftermarket SAE And Metric Shifters • All B&M Automatic Shifters • 1/2-20 Threads • Allows Sway Bar System to Work At 100% Efficiency • B&M quality • Zerk Type Fittings • Allows for Periodic Greasing B & M Shifter Accessory, Universal Aluminum, • Lasts Much Longer Than OEM Rubber BMA 80641 T-Handle, Brushed Finish, SAE and Metric Bushings • Handling Characteristics Improve Dramatically • Universal T-handle with brushed finish. Energy Suspension Sway Bar Bushing Set PPS 9.5161R Hurst Universal T-Handle - Brushed Finish BMA 1530020 • Allows Sway Bar System to Work At 100% Efficiency • Zerk Type Fittings • Hurst Name Embossed On Both Sides • Allows for Periodic Greasing • Firm, Comfortable, Natural Grip When Shifting • Lasts Much Longer Than OEM Rubber • Less Chance Of Hand Slipping And Missing A Shift Bushings • CNC Machined from Solid Billet Aluminum • Handling Characteristics Improve • Supplied With Adapters Dramatically Hurst Shifter Accessories, Universal Pistol Energy Suspension Sway Bar Bushing Set PPS 9.5165R Grip Shift Handle Brushed Aluminum BMA 1531000 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 23 • Specially Designed Mechanical Interlock • Unlimited Uses Energy Suspension Universal Bump Stop • Constructed of high grade 304 stainless steel PPS 9.9101G • Capable of withstanding heat in excess of 2500 Deg F • Strong - 100 lb. tensile strength Design Engineering Stainless-Steel Locking Ties 8" Performance Parts PERFORMANCE PARTS (8 Per Pack) DEI 10201 HEADER WRAP

• Constructed of high grade 304 stainless steel • Withstands 1800 Deg F direct/2500 Deg F intermittent heat • Capable of withstanding heat in excess of 2500 Deg F • Promotes increased flow for improved performance • Strong - 100 lb. tensile strength • Reduces temperature & vibration breakdown • Extremely pliable for a tight and secure wrap Design Engineering Stainless-Steel Locking Ties 14" (4 Per Pack) DEI 10202 • High resistance to abrasions, oil spills, temperatures and vibration breakdown Design Engineering Exhaust Wrap - Titanium, 2" x 15' DEI 10129 • The perfect solution to secure metal locking ties quickly! Design Engineering Locking Tie Tool DEI 10220 • Wrap header tubes to protect plug wires • Wrap downpipes to improve velocity • Wrap sections of exhaust & tail pipe to reduce heat from entering vehicle interior • Wrap motorcycle pipes to prevent leg burns PERFORMANCE PARTS Design Engineering Pipe Wrap & Locking Ties Kit - Black, 2" x 25' DEI 10119 THERMAL ACCESSORIES

• Reduce under hood temperatures a realistic 50% • Withstands direct heat up to 400 Deg F and 2000 Deg F • Decreases exhaust density & increases exhaust flow radiant heat • Improves horsepower • Flexible and easy to apply • Withstands 1200 Deg F direct/2000 Deg F radiant • Strong self-adhesive backing • Added durability and heat retention • Use to secure panels, seal air boxes, wrap wiring & more Design Engineering Exhaust Wrap Black, 2" x 50' DEI 10108 Design Engineering Cool Tape 1-1/2" x 15' DEI 10408

• Reduces underhood temps up to 50% • Capable of withstanding 500 Deg F direct / • Withstands 1800 Deg F / 2500 Deg F intermittent heat 2000 Deg F radiant heat • Improves exhaust flow for added power • Pliable for tight bends • Unique Carbon fiber look • Trim to desired length Design Engineering Titanium Exhaust Wrap, • Five popular diameters to choose from 2" x 50' DEI 10098 Design Engineering Heat Sheath - Aluminized Sleeving 3/4" x 3' DEI 10403

• Reduce under hood temperatures a realistic 50% • Decreases exhaust density & increases exhaust flow • Protect wires, cables, hoses, pipes & tubing from radiant heat sources • Improves horsepower • Radiant heat protection up to 2000 Deg F • Withstands 1200 Deg F direct/2000 Deg F radiant • Self-adhesive backing with release liner for easy • Added durability and heat retention installation Design Engineering Exhaust Wrap - Tan - • Moisture & solvent resistant 2" x 50' DEI 10102 • Virtually NO clearance needed Design Engineering Reflect-A-Cool - Radiant Heat Barrier 12" x 24" DEI 10909 • Withstands 1200 Deg F direct continuous heat • Helps prevent burn-through, hardening and cracking of boots • Universal-fits most straight or angled boots • Installs in seconds • Prevent Starter and Solenoid failure from • Double-wall construction for added durability heat soak Design Engineering Protect-A-Boot 6" Design Engineering Versa Shield Spark Plug Boot Protectors - Silver Protective Starter Wrap, 7" x 24" DEI 10908 (2-Pack) DEI 10501

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

24 CARQUEST®Auto Parts Service Lines Catalog Performance Parts Performance • Developed specifically for any application where extreme high heat is present • Extremely light weight, cut to fit • Will protect wires and lines when exposed up to • Adhesive backing 1800 Deg. F. Design Engineering Reflect-A-Gold - Design Engineering Titanium Heat Reflective Barrier, 12" x 24" DEI 10021 Protect-A-Sleeve, 4' x 1/2" Diameter DEI 10065

• Protects against abrasion chemicals & the elements • Rated for 375 Deg. F constant temp 500 Deg. F melting point • Heat protection up to 1500 Deg F • Superior in style & function to plastic tubing • Penetrates, seals, protects and prolongs the lifespan of exhaust • Cut to fit wrap Design Engineering Easy Loom • Protection from abrasions, hot oil spills & road grime Protective Sleeve, 3/8" x 20 Feet DEI 10652 • Many uses around the home and shop • 12 oz. spray can Design Engineering Hi-Temp Silicone Coating Spray - Black DEI 10301 • Protects wires, cables, fuel and brake lines etc... • Withstands direct heat up to 500∞F • Made from convoluted nylon 6 tubing-not plastic • Reduces temperature by more than 40% Design Engineering Cool-Tube - 1/2" I.D. x 3' • Heat protection up to 1500 Deg F DEI 10414 • Penetrates, seals, protects and prolongs the lifespan of exhaust wrap • Protection from abrasions, hot oil spills & road grime • Many uses around the home and shop • 12 oz. spray can • For firewalls, bulkheads, engine covers, floors, seat bottoms & more Design Engineering Hi-Temp Silicone Coating Spray - • Capable of handling continual temperatures up to Aluminum DEI 10302 850 Deg F • Resists UV degradation for long-term performance • Virtually NO clearance needed • Adhesive protected by a release liner rated up to 325 Deg F Design Engineering Reflect-A-GOLD - Heat Reflective Tape - 1.5" x 15' Roll DEI 10394

* Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order.

CARQUEST® Auto Parts Service Lines Catalog 25