DOCSLIB.ORG

Egge Machine and Speed Shop Egge Machine Co

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Egge Machine and Speed Shop Egge Machine Co EGGE MACHINE AND SPEED SHOP EGGE MACHINE CO. MACHINE EGGE Egge Machine Egge Order Desk Shipping Our sales team is available to assist you Domestic Orders (less than 150 lbs) ship and Speed Shop Monday thru Thursday from 7:00am to 4:30pm, proudly celebrates more than via UPS Standard unless otherwise requested. Fridays 7:00am to 3:30pm, Pacific Time. Next-day, two-day and three-day delivery is 95 years of service to the available upon request. antique, collector car, hotrod, Call 866.996.EGGE and muscle car enthusiast. to speak with your Engine Parts Specialists International Orders ship via UPS Express or USPS Global Express unless otherwise Egge began in 1915 as a race who can assist you with quality engine parts, requested. All shipments are FOB Santa Fe and general automotive repair technical assistance, and courteous service. Springs, California. shop in Plainview, Texas. 95 Egge by Mail years and three generations Ordering by mail is made easy by using the Order Shipping and handling charges will be added to later, we continue to provide Form located in the back of the catalog. Once your purchase. COD orders incur an $10.00 charge hard to find and nostalgic completed, contact an Engine Parts Specialist per package. performance engine parts that to establish freight charges (unless using credit keep America’s dream cars alive card), include your payment and mail it to: Core Charges Camshafts, rocker assemblies, some main bearing and running well. We’ve added Egge Machine Company 11707 Slauson Avenue shells, oil, water and fuel pumps, and connecting rods nostalgic performance products are exchange items. Core charges applied to these Santa Fe Springs, CA 90670-2217 from Scat, Offenhauser, parts are deemed appropriate to the value of the Powermaster, Torco, Egge by FAX core. All core charges are refundable upon receipt of an exchange core suitable for rebuilding. Camcraft, Fenton, Iskenderian, Fax the Order Form located in the back of this Moon, and Best Gasket. Egge catalog including a phone number so we can reach Return Policy has everything you’ll need to you with any questions, to 562.693.1635. Please open and inspect your shipment immediately rebuild Y-Block Ford, Nail- Payment Methods upon receiving it from EGGE. If you are not completely Head-Buick, 348, 409 Chevy satisfied with a product purchased from EGGE, you may Egge Machine Company accepts credit cards return it for exchange or balance on account. Note our and early Hemi engines from (Visa, Master Card, American Express, Discover, Electrical Parts Return Policy on page 48. early 1900s to 1980s. JCB), checks, money orders, and wire transfer (wire transfers are subject to a $15.00 service Please call us DID YOU KNOW?... charge). prior to returning all parts! Egge pistons are precision First Time Buyer - Credit card or COD-Cash made with American Pride in ONLY. COD orders incur a $10.00 charge per Your EGGE sales rep will issue an identifying RGA# (return goods authorization). Please pack your return Santa Fe Springs, CA and don’t package. Returned Checks will incur a $30.00 charge. parts well and insure the contents. Returns must pass require coating to make up for a quality inspection and be in a re-sellable condition. engineering flaws! Distributors Refunds for C.O.D. orders require 30 days, from date Please contact an Egge Engine Parts Specialist for the returned parts are received, to process. qualifications. Call your Egge Engine Parts Expert at 866-996-3443 and visit: www.EGGE.com 1 EGGE MACHINE AND SPEED SHOP WARRANTIES GENERAL WARRANTY WHAT’S NEW! Products purchased from Egge Machine Company and not manufactured or NEW ENGINE KITS remanufactured by Egge Machine Company are covered by the original manufacture’s LAYOUT established warranty and subject to LISTED BY ENGINE SIZE, YEAR. manufacture’s conditions and policies. Products manufactured and/or remanufactured by Egge TORCO ADVANCED Machine Company are warranted for twelve EGGE MACHINE CO. MACHINE EGGE LUBRICANTS months from original purchase date. Warranty limited to replacement of defective part or parts. Please note the Return Policy on Page 1. COMP CAMS THUMPR™ CAMS REMANUFACTURED OIL PUMP WARRANTY POWERMASTER ALL pumps are guaranteed against defective STARTERS & GENERATORS materials or workmanship. Our liability is limited to: the replacement of pump only, and no other incidental or consequential expenses. Any pump OTB GEAR returned for warranty must be returned without DRESS-UP ITEMS dismantling to qualify for replacement. EGGE PISTON WARRANTY SURF CITY GARAGE Egge Machine Company warrants each Egge WASH, WAX AND POLISH manufactured piston and piston pin assembly to be free from defects in materials or workmanship for a period EGGE BRANDED of 90 days from date of installation. Any Egge piston or piston and piston pin assembly which, under MERCHANDISE normal and proper use, is proved to be defective T-SHIRTS, POSTERS, BANNERS either in materials or workmanship will be replaced. AND MORE! Any product claimed to be defective shall, at the option of Egge Machine Company, be returned THE EGGE LIFE WITH: prepaid to Egge Machine Company. COMMON TECH QUESTIONS, THE PROVISIONS OF THIS WARRANTY CONSTITUTE EVENT LISTINGS, THE ONLY AGREEMENT OR OBLIGATION OF EGGE CUSTOMER CARS, MACHINE COMPANY. CONCERNING THE SUBJECT OF AND HELPFUL RESOURCES WARRANTIES, ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. EGGE SERVICES: BABBITTING, FUEL, OIL AND The remedy of replacement provided by this warranty WATER PUMP REMANUFACTURE is the only remedy afforded for breach of this written warranty or for breach of any express AND, CUSTOM VALVE or implied warranties arising under state law. MANUFACTURING Egge Machine Company shall not be liable for any labor costs or other expenses in replacing MY CLASSIC CAR a defective product, nor for any incidental WATCH THE EGGE SPEED SHOP or consequential damages resulting from or IN THE NEW SEASON OF THE contributed to by any defect in materials or SPEED CHANNEL HIT: MY CLASSIC workmanship, negligence in manufacture or design, or failure to warn. Egge Machine Company CAR WITH DENNIS GAGE. makes no warranty with respect to any product which has been altered or subjected to misuse, abuse or use for which it was not designed. 2 Call your Egge Engine Parts Expert at 866-996-3443 and visit: www.EGGE.com EGGE MACHINE AND SPEED SHOP TABLE OF CONTENTS THE EGGE LIFE ENGINE KITS AMC/RAMBLER .......................................... 176 GENERAL INFORMATION ..............................1 AUBURN...........................................................72 WARRANTIES ...................................................2 BUICK ...............................................................72 RESOURCES ................................................4-13 CADILLAC .......................................................83 EVENTS ...............................................................4 CHANDLER ......................................................86 EGGE SHOP TOUR ...........................................5 CHEVROLET ....................................................87 CUSTOMER CARS ............................................6 CO. MACHINE EGGE CHRYSLER........................................................98 EGGE ENTHUSIASTS .......................................7 CORD ............................................................ 106 EGGE TECH ...........................................8-9, 16 DESOTO ....................................................... 106 EGGE SELECT PISTONS .......................10-13 DODGE ......................................................... 109 EGGE SPEED SHOP DURANT ....................................................... 117 PISTONS .........................................................10 EDSEL ............................................................ 117 SCAT CONNECTING RODS .......................14 ELCAR............................................................ 117 SCAT CRANK SHAFTS .................................16 ESSEX ............................................................ 117 SCAT ROTATING ASSEMBLIES .................20 FLINT ............................................................. 118 CAMCRAFT CAMS ........................................31 FORD ............................................................. 118 ISKENDERIAN CAMS ....................................36 GMC .............................................................. 132 COMP CAMS .................................................46 GRAHAM ...................................................... 135 POWERMASTER PRODUCTS ......................47 HUDSON ...................................................... 135 PERTRONIX IGNITOR & IGNITOR II .........48 INTERNATIONAL ....................................... 138 BEST GASKET ................................................54 KAISER-FRAZER .......................................... 140 MOON EQUIPMENT .....................................55 LAFAYETTE .................................................. 140 OFFENHAUSER ...............................................56 LASALLE ........................................................ 140 DRESS-UP ITEMS ............................................57 LINCOLN ...................................................... 141 EXHAUST .........................................................60 MARQUETTE ................................................ 145 TORCO ADVANCED LUBRICANTS ...........62 MAXWELL
Load more

Recommended publications
  • Timing Belt Interference Caution Note: Camshaft
    Carmax 6067 170 Turnpike Rd Westborough, MA 01581 YMMS: 1991 Chevrolet Lumina Z34 Sep 3, 2020 Engine: 3.4L Eng License: VIN: Odometer: TIMING BELT INTERFERENCE CAUTION NOTE: CAMSHAFT DRIVE BELTS OR TIMING BELTS - The condition of camshaft drive belts should always be checked on vehicles which have more than 50,000 miles. Although some manufacturers do not recommend replacement at a specified mileage, others require it at 60,000-100,000 miles. A camshaft drive belt failure may cause extensive damage to internal engine components on most engines, although some designs do not allow piston-to-valve contact. These designs are often called "Free Wheeling". Many manufacturers changed their maintenance and warranty schedules in the mid-1980's to reflect timing belt inspection and/or replacement at 50,000- 60,000 miles. Most service interval schedules shown in this section reflect these changes. Belts or components should be inspected and replaced if any of the following conditions exist: Crack Or Tears In Belt Surface Missing, Damaged, Cracked Or Rounded Teeth Oil Contamination Damaged Or Faulty Tensioners Incorrect Tension Adjustment REMOVAL & INSTALLATION Tip: Timing belt CAUTION: For 1996-97 models, this application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. NOTE: The camshaft timing procedure has been updated by TSB bulletin No. 47-61-34, dated December, 1994. REMOVAL Tip: timing 3.4 x motor 1. Disconnect negative battery cable. Remove air cleaner and duct assembly. Drain engine coolant. 2. Remove accelerator and cruise control cables from throttle body.
    [Show full text]
  • Sept 18—Craig Harmon “The History of Rambler And
    Sept 18—Craig Harmon “The History of Rambler and September 25th, 2012 American Motors” LAST WEEK: Sept 25—Pat Crosby “The History of Jackson Rotary Last meeting: Our guests included: Natalie Krska (Court reporter for Calaveras county), a guest of and the Personal History of Pat Crosby” Irene Perbal-Boylson, and Shawna Molina introduced by Eddie Methered. Oct 2—Club Assembly – Membership John Swift gave us some of the new procedures for the Bowl-A-Thon this year. It will occur earlier in Oct 20—BOWLATHON the day – 2:00 PM for registration with bowling to start at 3:00PM. It should all be over before dark. Nov 13—Sergeant John Silva “Office of Emergency The Club will provide the BBQ’d food (I’m not sure the timing of that), and we really need sponsors to Services Project Lifesaver” make the event work fiscally. John provided information sheets on the levels of sponsorship and Nov 20—Beth Barnard on Volcano Theatre what’s offered for /$100, $200 & $300 sponsors. The Club will soon be painting Jackson’s fire hydrants white – I gather the participants know when. Irene Perbal-Boylson urges us all to bring visitors to the Club meeting. She suggests that former members may just be waiting for an invitation to re-join. In any case – bring a guest, and let her know when you’ve earned points. Tuesday 7:15am Plymouth: 49er RV Resort Frank Halvorson brought us up-to-date on happenings at the Hotel Leger in Moke Hill. A popular TV Wednesday 12:00 show undertakes to re-vamp decrepit hotels in a blitz fashion and then air the results.
    [Show full text]
  • Vince Taliano
    Cadillac & LaSalle Club Potomac Region Caddie Chronicle August 2015 DIRECTOR’S MESSAGE BY VINCE TALIANO I recently had the pleasure of exchanging 2015 OFFICERS: emails with Walter McCall. What a thrill it REGIONAL DIRECTOR was to learn that he is an avid reader of the NEWSLETTER EDITOR WEBSITE MANAGER Caddie Chronicle. Walter wrote one of the VINCE TALIANO most comprehensive books on the history of ASSISTANT REGIONAL DIRECTOR CAR SHOW COORDINATOR Cadillacs and LaSalles titled “80 Years of DAN RUBY Cadillac LaSalle”. Second-hand issues of NATIONAL DIRECTOR his book on eBay still command a premium NEWSLETTER COLUMNIST JACK MCCLOW price 33 years after it was first published. SECRETARY Thanks, Mr. McCall, for your contributions to ASSOCIATE NEWSLETTER EDITOR SANDY KEMPER the Cadillac community. TREASURER HARRY SCOTT Congratulations to Chris Cummings whose ACTIVITIES DIRECTOR book, “Cadillac V-16s Lost and Found: NEWSLETTER COLUMNIST Tracing the Histories of the 1930s R. SCOT MINESINGER MEMBERSHIP DIRECTORS Classics”, was recently reviewed by Old CENTRAL VA REGION LIAISONS Cars Weekly. Read the review below! NEWSLETTER COLUMNISTS CHUCK & DEBBIE PIEL Classic Car Club of America “Full Classics” have it all: OTHER KEY POSITIONS: style, speed, luxury and personality. Usually, their SUMMER PICNIC HOST owners did as well. It took a big personality to buy a big J. ROGER BENTLEY Classic car during the Great Depression, and the stories AUTOMOBILIA AUCTIONEER of the cars and buyers are often worth retelling. GEORGE BOXLEY Christopher W. Cummings captures those stories and NEWSLETTER COLUMNIST those personalities — both the four-wheeled and the RITA BIAL-BOXLEY two-legged varieties — in his new book, “Cadillac V- NEWSLETTER COLUMNIST 16s Lost and Found: Tracing the Histories of the CHRIS CUMMINGS 1930s Classics.” PHOTOGRAPHER RANDY EDISON As the title implies, Cummings has selected the stories of Full Classic Cadillac V- AUTOMOBILIA AUCTIONEER 16 motorcars, which were built from 1930-1940.
    [Show full text]
  • American Motors Corporation Model Descriptions and General Information
    American Motors Corporation Model Descriptions and General Information Rambler Six and V8: 1955 – 1957 1955 Nash Rambler Six The 1955 Nash Rambler received a minor facelift over 1954, but was basically unchanged from the car issued in 1953, which was distinguished by a lowered hood, and enclosed front and rear fenders. That styling had been credited to Pinin Farina and did have many of the styling features of the 1952 and 1953 Golden Anniversary Ambassador and Statesman. (For more information on the 1953 Rambler, see the Tech Section on Nash vehicles). New for 1955 features included the addition of a cellular grille and full wheel cut-outs in the front fenders, versus the previous enclosed look. Ramblers came in two wheelbase models; 100" for the Standard 2- 1955 Rambler Cross Country Station Wagon. door and 4-door cars and 108" for "Custom" 2 and 4-door models as is the station wagon shown at right. As part of the merger, the Rambler was sold as the "Nash Rambler" and the "Hudson Rambler". See the discussion under Hudson Cars for more information. The 85 horsepower 184 cu. in. 6-cylinder engine of previous years was dropped and was replaced by the 90 horsepower 196 cubic inch engine, which had come on the Hydra-Matic equipped cars in 1953 and 1954. It now was the sole available powerplant. Rambler consistently held the No. 1 spot in used car value, as reflected in NADA reports of the time. As such, for 1955, 56,023 Nash Ramblers were sold. And when combined with Hudson Rambler sales, over 81 thousand were delivered to customers, which, at the time, was the highest total ever.
    [Show full text]
  • Timing Belt Installation
    1996 Toyota Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) Vehicle > Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Service and Repair > Procedures > Timing Belt Replace TIMING BELT INSTALLATION 1. INSTALL OIL PUMP PULLEY (a)Align the cutouts of the pulley and shaft, and slide on the pulley. (b)Using SST, install the nut. SST 09960-10010 (09962-01000, 09963-00500) Torque: 24 Nm (245 kgf-cm, 18 ft-lb) 2. INSTALL CRANKSHAFT TIMING PULLEY (a)Align the timing pulley set key with the key groove of the pulley. (b)Install the timing pulley. facing the sensor side inward. NOTICE: Do not scratch the sensor part of the crankshaft timing pulley. 3. INSTALL NO.2 IDLER PULLEY (a)Install the pulley with the bolt. Torque: 42 Nm (425 kgf-cm. 31 ft-lb) HINT: Use a bolt 42 mm (1.65 in.) in length. (b)Check that the idler pulley moves smoothly. 4. TEMPORARILY INSTALL NO.1 IDLER PULLEY AND TENSION SPRING (a)Align the bracket pin hole the pivot pin. (b)Install the pulley with the bolt. Do not tighten the bolt yet. HINT: Use a bolt 42 mm (1.65 in.) in length. (c)Install the tension spring. (d)Pry the pulley toward the left as far as it will go and tighten the bolt. (e)Check that the idler pulley moves smoothly. 5. TEMPORARILY INSTALL TIMING BELT NOTICE: The engine should be cold. (a)Using the crankshaft pulley bolt. turn the crankshaft and position the key groove of the crankshaft timing pulley upward.
    [Show full text]
  • SKF Timing Belt Kits Technical Overview
    Catalog 457702 2010 SKF Timing Belt Kits Technical overview In today’s modern automotive engines, there has been a quiet revolution. The need to run more auxiliary equipment such as water pumps or injection pumps, combined with efficiency demands and noise reduction, has caused new timing belt and tensioner systems to be developed. At first, tensioners were of a fixed nature, usually of metal design. They were simple to install: just set tension and tighten. Today, tensioners more likely include an internal spring or external damper, and non-metallic components are becoming more common. This illustration provides an overview of a modern timing belt and tensioner system. Engine-front wheel drive Belt Camshaft pulley tensioner unit Timing belt Injection pump pulley Water pump pulley Idler pulley Crankshaft The crankshaft drives the camshaft(s) and actuates the valves via a belt or a chain. Due to its advantages compared with those of a chain, namely reduced space, as well as lighter and quieter running, the timing belt is widely used by many car manufacturers. Belt tensioner unit (TBT) Idler pulley The belt tensioner unit sets the right tension and provides guidance for the belt. The idler pulley is fixed and allows the belt to be correctly wound around the driven component. The adjustment of tension during mounting is achieved by means of an eccentric Main designs currently used are shown here: or by means of a spring acting against a rear plate. The automatic belt tensioner unit, with its built-in spring and friction system, maintains a constant tension of the belt while the engine is running.
    [Show full text]
  • TIMES MAGAZINE for EARLY FORD ENTHUSIASTS an International Organization Volume 57, Number 6 November/December 2020
    TIMES MAGAZINE FOR EARLY FORD ENTHUSIASTS An International Organization Volume 57, Number 6 November/December 2020 1934 Standard Fordor Sedan An International Organization Copyright @ The Early Ford V-8 Club, 2020 P.O. Box 1715 Maple Grove, MN 55311 Volume 57 Number 6 November/December 2020 Contributions of material for publication in the V-8 TIMES are gratefully accepted. It will be assumed they are donated unless other arrangements are made. CONTENTS Inside Departments... From the Oval Office .............................................................................. 1 From the Editor ...................................................................................... 2 Letters ...................................................................................................... 3 Reader’s Reply ........................................................................................ 7 In Transit. ................................................................................................ 11 Early Ford V-8 Foundation .................................................................... 17 Regional Group News ............................................................................. 83 CARrespondence (Tech Advisors) ......................................................... 95 Page 21 Classified Ads ........................................................................................ 103 Features... Opinion .....................................................................................................15 Ford Notes:
    [Show full text]
  • Flowmaster Exhaust Systems Are Designed Vehicle Specific and Do Not Violate the Manufacturer’S Factory Warranty
    2016 MUFFLERS // SYSTEMS // HEADERS // CATALYTIC CONVERTERS // TIPS & ACCESSORIES FLOWMASTER MANUFACTURING Shown in a rare quiet moment, Flowmaster’s state-of-the-art manufacturing plant in Northern California features many self-designed tools and high-tech robotics to build the world’s most advanced mufflers. For over three decades, Flowmaster has led the way in automotive performance exhaust technology with some of the earliest product patents held by an exhaust manufacturer. As the world’s first fully welded muffler in 1983, Flowmaster raised the bar for durability and strength, while singlehandedly reinventing the performance exhaust industry. Today, we maintain that edge with constant innovation in exhaust solutions for street, race, and off-road applications. 2 WWW.FLOWMASTERMUFFLERS.COM TECHNOLOGY CAR APP 05 12 HEADERS TRUCK APP 06 34 CONVERTERS MUFFLERS 08 50 RACE PARTS Tech Support: 1-707-544-4761 www.flowmastermufflers.com 66 ACCESSORIES 72 The Exclusive Performance Exhaust Of NASCAR INFO / FAQ FIND US ON: 80 NOTE: Flowmaster’s muffler recommendations are based on OEM configurations, but are not considered direct-fit replacements. Our universal mufflers may require modification during installation. Additional muffler options may apply outside of these recommendations. Should you have any questions, call our tech line for further assistance in selecting a system or muffler. WWW.FLOWMASTERMUFFLERS.COM 3 ABOUT THE COMPANY For over 30 years, Flowmaster has been the leader in advanced exhaust technology through our extensive commitment to research and development. Early on we learned that by understanding an engine’s total operation, we could not only generate a terrific performance exhaust sound, but more importantly increase combustion efficiency and improve both performance and fuel mileage.
    [Show full text]
  • April 2021 VALVE CHATTER
    VALVE CHATTER APRIL 2021 Newsletter, Volume 26, Issue 4 Regional Group #148 of the Early Ford V-8 Club of America, Inc Chatter From the President Patsy Hamlin Hopefully everyone has gotten their Covid injections and your waiting period is over as well. Looking forward to getting together as soon as we hear all is well to meet once again. I will be participating in a Zoom meeting with the National Board to cover the guide lines to once again restart our meetings. At this point it it looks promising that we will be able to meet in May. We will put out the information as soon as it is finalized! Tom and I have gotten our Covid injections and our waiting period is over and we have gone out . Last night we met up with Sylvia and Don Harwick at the casino for dinner. We had a great time and it was good to be around people once again. Then today Don called and wanted to come over to our house and another experience we have not had in some time company at our house. Tom showing Don his new acquisition “The 1964 Ranchero” and just sitting around cutting up, thought I would put this picture in the Chatter. Tom and Don sitting together on the love sit. Sylvia and I were not about to give up our chairs so there they are sitting close. As you can see the Muffin man has grown some new hair on his chin, so now we have another fur face in the club.
    [Show full text]
  • Skidoo 1200 4Tec Muffler/ Header Testing
    SkiDoo 1200 4tec muffler/ header testing “Hill” Billy Howard, of Howards SkiDoo/ Arctic Cat/ Kubota in Coutersport PA set this test session up. He brought the stock 09 4tec mule sled from his dealership, and obtained this multitude of headers and mufflers etc. He also invited his young, lighter weight driver and right hand tech/ engineering student Dave VonArx, and his pal and fellow good guy/ gearhead Bobby Donatelle from MN to help in this long awaited multi-part assessment. Billy and Bobby had this pile of stuff to try on the bone stock, but well-broken (in as the result of a summer’s worth of asphalt racing) 2009 SkiDoo 4tec: Straightline black painted mild steel 3-1 header MBRP stainless steel 3-1 header Straightline “quiet” round glasspack muffler Straightline “loud” round glasspack muffler\ Hindle SS glasspack round muffler Oversize throttle bodies Boyesen experimental wings that fit into the throttle bodies Coming by special delivery during the day: Full Power/ CJ Motorsports stainless steel oval glasspack muffler Coming via personal delivery by DynoPort owner Rich Daly during the day: CrankShop/ DynoPort ceramic coated mild steel header DynoPort baffled high flow (no glass packing) quiet muffler We were, unfortunately, faced with dramatically changing weather conditions from morning to early evening when Billy had to shuffle Bobby D off to the Buffalo airport. The dropping barometric pressure and increasing humidity (water grains per pound of air) as the day went on changed our baseline. The stock EFI doesn’t seem to compensate for the slight reduction in baro on this day, and surely can’t adjust for water vapor in the air (displacing O2).
    [Show full text]
  • 1.4L/1.6L Dohc Engine Mechanical
    SECTION : 1C1 1.4L/1.6L DOHC ENGINE MECHANICAL CAUTION : Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed electrical terminals. Disconnecting this cable will help prevent personal injury and damage to the vehicle. The ignition must also be in LOCK unless otherwise noted. TABLE OF CONTENTS SPECIFICATIONS . 1C1–2 Oil Pan. 1C1–38 Engine Specifications . 1C1–2 Oil Pump. 1C1–40 Fastener Tightening Specifcations. 1C1–5 Engine Mount. 1C1–43 SPECIAL TOOLS . 1C1–7 Camshaft Gears. 1C1–45 Special Tools Table . 1C1–7 Rear Timing Belt Cover. 1C1–46 Engine. 1C1–48 COMPONENT LOCATOR . 1C1–9 Pistons and Rods. 1C1–53 Cylinder Head. 1C1–9 UNIT REPAIR. 1C1–58 Cylinder Block. 1C1–10 Cylinder Head and Valve Train Components. 1C1–58 Intake & Exhaust Manifold. 1C1–12 Crankshaft. 1C1–65 Timing Belt. 1C1–13 Crankshaft Bearing and Connecting Rod Engine Mounting. 1C1–14 Beadings – Gauging Plastics. 1C1–74 MAINTENANCE AND REPAIR . 1C1–15 GENERAL DESCRIPTION AND SYSTEM ON–VEHICLE SERVICE. 1C1–15 OPERATION . 1C1–77 Engine Cover. 1C1–15 Cylinder Head and Gasket. 1C1–77 Camshaft Cover. 1C1–15 Crankshaft. 1C1–77 Intake Manifold. 1C1–16 Timing Belt. 1C1–77 Exhaust Manifold. 1C1–20 Oil Pump. 1C1–77 Cylinder Head and Gasket. 1C1–21 Oil Pan. 1C1–77 Camshaft. 1C1–29 Exhaust Manifold. 1C1–77 Timing Belt Check and Adjust. 1C1–30 Intake Manifold. 1C1–77 Timing Belt. 1C1–34 Camshaft. 1C1–77 1C1 – 2I1.4L/1.6L DOHC ENGINE MECHANICAL SPECIFICATIONS ENGINE SPECIFICATIONS Application Description (Manual and Automatic) 1.4L DOHC 1.6L DOHC General Data: Engine Type F14D F16D Displacement 1399 cm3 1598 cm3 (97.51 in3) Bore Stroke 77.9 x 73.4 mm (3.01 in.
    [Show full text]
  • Aston Martin V8 Vantage 8 Vantage 8
    ASTON MARTIN VV88 VANTAGE & ROADSTER 4.34.34.3,4.3 ,,, LARINI “ SSSPORTSSPORTS ””” SYSTEM In terms of sound, the OE system is a useful one, but in no way comparable to the Larini ‘ Sports ’ Rear Box. Once fitted, you will hear and feel the difference. Feedback to our exhaust for the V8 Vantage has been incredible, and sound clips really do not do the system justice. You have to hear and drive the system in the metal to appreciate the transformation it makes to the V8 Vantage. A point of note is the structural integrity of our system, which is vital to the component and vehicle in the case of an impact. More info further below. Key Features --- - Stainless Steel 'fast road' use sports exhaust system, from the centre section back. - Delivers an extra +22 bhp. - Offers vastly improved low/mid-range Torque. - Delivers much sharper throttle response. - Engineered for maximum flow efficiency, using expertly engineered performance internals. - Accelerated gas-flow reduces engine bay temperatures. - Weight reduction of 12 kilograms, significantly benefits handling and braking ability. - Produces the sophisticated, ‘tuned’ authentic Larini 'Note' under acceleration when 'pushing'. - Develops a fantastic ‘tone’ under acceleration, in keeping with the sporting image and heritage of Aston Martin. - Perfectly practical for everyday use: does not suffer from drone, 'boom' or vibration. - Constructed using aircraft grade T.304 Austenitic Stainless Steel. - Features Mandrel bent pipe-work allowing a constant internal diameter, maintaining a smooth, constant gas flow. - 100% Tig welding construction. - Precision engineered for accurate fit. Requires no special procedures to fit. (SOUL) Superior Sound - Our System sounds phenomenal.
    [Show full text]