INTEGRATED CORROSION ENGINEERING Eight Decades of Innovation

Total Page:16

File Type:pdf, Size:1020Kb

INTEGRATED CORROSION ENGINEERING Eight Decades of Innovation INTEGRATED CORROSION ENGINEERING Eight Decades of Innovation Integrated Corrosion Engineering (ICE) is SERVICES PROVIDED comprised of licensed and experienced • FEED Studies and detailed engineering & professionals for the cathodic protection design industry. ICE is a full turnkey division of • Bid Submittal assistance to general contractors & operating companies ICC for all cathodic protection services. • Bill of materials and procurement coordination & recommendations • Capabilites of expiditing long lead CP materials through BK Corrosion & JA Electronics • Field Engineers & Technicians for assembly in the field • Final testing for commissioning followed by a detailed report that meets NACE Standards & Requirements • Annual Survey Compliance & Maintenance COMMON APPLICATIONS • Carbon Steel & Ductile Iron Pipelines • Well Castings • New & Existing Storage Tanks • Rail Transit Systems • Soil Resistivity Testing • Plant & Facility Piping • Marine Vessels • Bridges An Integrated Corrosion Company WHY INTEGRATED CORROSION ENGINEERING? Integrated Corrosion Engineering (ICE) is a leading storage tanks; industrial plants; oil and natural provider of cathodic protection and corrosion gas facilities, piping, vessels and storage tanks; engineering services. With decades of practical and government infrastructure such as dams and professional experience, our company has been able bridges; reinforced concrete structures; marine to refine our expertise, sophistication and capabilities facilities; piping and offshore structures. to economically support your company’s corrosion control needs, including engineering design, material Our engineering staff is comprised of registered supply, operation and maintenance, and construction professional engineers and specialists that hold inspection and supervision. certifications from the National Association of Corrosion Engineers (NACE International). Our • Integrated Corrosion Engineering has experience engineers are active at industry events, seminars, across many different industries including airports, and members of professional associations and military bases, transit systems, oil and gas, power technical societies. With a wide range of technical generation, marine and offshore, water and backgrounds and engineering disciplines, all of our wastewater utilities, and construction. engineers have extensive hands-on experience with evaluating different cathodic protection systems in • Integrated Corrison Engineering has performed many different regions nationally, and are well-versed our services on structures including piping in providing engineering solutions for any cathodic networks of various materials, light rail transit protection application. systems; airports; water and wastewater treatment facilities; power generation facilities, piping and WHY INTEGRATED CORROSION ENGINEERING? CP DESIGN & CORROSION ENGINEERING Integrated Corrosion Engineering provides full service corrosion engineering and design services. Our engineers conduct pre- design surveys consisting of soil corrosivity surveys, current requirement testing, foreign structure interference testing, and CP ENGINEER SURVEYS & identification of locations for cathodic protection equipment. With INSPECTIONS the analysis of data and site conditions, our engineers provide ICE conducts site surveys to identify, high quality engineering design documents including material document, and evaluate the level of specification, calculations and construction drwaings. These cathodic protection on metallic structures services are available for new designs as well as for the evaluation in soil, water, concrete, and other of existing infrastructure. Typical structures include: corrosive electrolytes. Our engineers are NACE certified and qualified to undertake • Pipelines • Bridges the many different types of surveys • Well Casings • Offshore Structures necessary to accurately assess the level • Elevated Storage Tanks • Transit Systems of corrosion protection acheieved due to • Above-Ground Storage Tanks • Clarifiers application of cathodic protection. We • Underground Storage Tanks • Digesters use the most sophisticated equipment • Tank Bottoms • Heat Exchangers in the industry for our surveys. Typical • Plant & Facility Piping • Concrete Rebar engineering surveys include close • Piles • Marine Vessels interval surveys, routine operation and maintenance monitoring surveys, failure Other corrosion engineering solutions include cathodic protection analysis, cathodic protection system feasibility studies, cost/benefit analysis, and general corrosion troubleshooting, interference testing, consulting for all types of structures. and cathodic protection system startups. EPC SERVICES ICE has exclusive partnership with Integrated Project Consultants (IPC) which allows us to provides a full range of construction management and inspection services. Experienced personnel conduct design and specification reviews, field inspections and oversight, and quality assurance inspection services for all types of corrosion-related projects. INTEGRATED CORROSION ENGINEERING OUR PROJECTS Integrated Pipeline Project (IPL) The Tarrant Regional Water District (TRWD) and the City of Dallas Water Utilities (DWU) have partnered to design, build, and operate a raw water infrastructure to tap into existing sources. Denver RTD ICE’s services have included light rail track isolation tests, stray current testing, and cathodic protection of buried water & gas utility systems at passenger stationa and maintenance yards. Projects for Denver RTD have included: FasTrack Segment 1 & 2, TREX, Southwest Corridor, West Corridor, and Union Station LRT. Denver International Airport ICE provided corrosion control designs, testing and inspections for all of the DIA aviation fuel and City-owned buried utility systems including water, de-icing, and natural gas lines, electronic monitoring systems designs for the Denver International Airport aviation fuel systems. Clark County Water Reclamation Corrosion engineering services for Clark County (Las Vegas, NV), for their wastewater treatment plant. Platte River Power Association Corrosion control services for the Rawhide Power Plant. AC&C provides corrosion control designs, testing & inspection for all of the PRPA buried utility systems & plant cooling waterlines. Freeport McMoran Corrosion engineering services for the Climax Mine at Leadville, Colorado for buried utility systems and plant waterlines. 3568 Peoria Street, Suite 608 • Aurora, CO 80010 | P: 720.975.9494 • F: 720.975.9499 [email protected] | www.corrosion-engineers.com.
Recommended publications
  • Cathodic Protection of Concrete Bridges: a Manual of Practice
    SHRP-S-372 Cathodic Protection of Concrete Bridges: A Manual of Practice J. E. Bennett John J. Bartholomew ELTECH Research Corporation Fairport Harbor, Ohio James B. Bushman Bushman & Associates Medina, Ohio Kenneth C. Clear K. C. Clear, Inc. Boston, Virginia Robert N. Kamp Consulting Engineer Albany, New York Wayne J. Swiat Corrpro Companies, Inc. Medina, Ohio Strategic Highway Research Program National Research Council Washington, DC 1993 SHRP-S-372 ISBN 0-309-05750-7 Contract C-102D Product No. 2034 Program Manager: Don M. Harriott Project Manager: It. Martin (Marty) Laylor Consultant: John P. Broomfield Production Editor: Cara J. Tate Program Area Secretary: Carina S. Hreib December 1993 key words: bridges bridge maintenance bridge rehabilitation cathodic protection chlorides corrosion corrosion prevention corrosion rate CP electrochemical methods reinforced concrete Strategic Highway Research Program National Academy of Sciences 2101 Constitution Avenue N.W. Washington, DC 20418 (202) 334-3774 The publication of this report does not necessarily indicate approval or endorsement of the findings, opinions, conclusions, or recommendations either inferred or specifically expressed herein by the National Academy of Sciences, the United States Government, or the American Association of State Highway and Transportation Officials or its member states. © 1993 National A_zademy of Sciences I.SM/NAP/1293 Acknowledgments The research described herein was supported by the Strategic Highway Research Program (SHRP). SHRP is a unit of the National Research Council that was authorized by section 128 of the Surface Transportation and Uniform Relocation Assistance Act of 1987. This report is a compilation of work by ELTECH Research Corporation, Corrpro Companies, Inc., and Kenneth C.
    [Show full text]
  • Analysis of Alternatives
    ANALYSIS OF ALTERNATIVES Legal name of applicants: Henkel AG & Co. KGaA; Henkel Global Supply Chain B.V. Submitted by: Henkel AG & Co. KGaA. Substance: Dichromium tris(chromate), EC No: 246-356-2, CAS No: 24613-89-6 Use title: Use of Dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Use number: 2 Use number: 2 Copy right protected - Property of Members of the CCST Consortium - No copying / use allowed. ANALYSIS OF ALTERNATIVES Disclaimer This document shall not be construed as expressly or implicitly granting a license or any rights to use related to any content or information contained therein. In no event shall applicant be liable in this respect for any damage arising out or in connection with access, use of any content or information contained therein despite the lack of approval to do so. ii Use number: 2 Copy right protected - Property of Members of the CCST Consortium - No copying / use allowed. ANALYSIS OF ALTERNATIVES CONTENTS DECLARATION .......................................................................................................................................................... XV 1. SUMMARY 1 2. INTRODUCTION .................................................................................................................................................. 8 2.1. Substances ........................................................................................................................................ 8 2.2.
    [Show full text]
  • Galvanic Corrosion
    10 GALVANIC CORROSION X. G. ZHANG Teck Metals Ltd., Mississauga, Ontario, Canada A. Introduction graphite, are dispersed in a metal, or on a ship, where the B. Definition various components immersed in water are made of different C. Factors in galvanic corrosion metal alloys. In many cases, galvanic corrosion may result in D. Material factors quick deterioration of the metals but, in other cases, the D1. Effects of coupled materials galvanic corrosion of one metal may result in the corrosion D2. Effect of area protection of an attached metal, which is the basis of cathodic D3. Effect of surface condition protection by sacrificial anodes. E. Environmental factors Galvanic corrosion is an extensively investigated subject, E1. Effects of solution as shown in Table 10.1, and is qualitatively well understood E2. Atmospheric environments but, due to its highly complex nature, it has been difficult to E3. Natural waters deal with in a quantitative way until recently. The widespread F. Polarity reversal use of computers and the development of software have made G. Preventive measures great advances in understanding and predicting galvanic H. Beneficial effects of galvanic corrosion corrosion. I. Fundamental considerations I1. Electrode potential and Kirchhoff’s law I2. Analysis B. DEFINITION I3. Polarization and resistance I4. Potential and current distributions When two dissimilar conducting materials in electrical con- References tact with each other are exposed to an electrolyte, a current, called the galvanic current, flows from one to the other. Galvanic corrosion is that part of the corrosion that occurs at the anodic member of such a couple and is directly related to the galvanic current by Faraday’s law.
    [Show full text]
  • Brad A. James, Ph.D., P.E., FASM
    Brad A. James, Ph.D., P.E., FASM Group Vice President & Principal Engineer | Materials & Corrosion Engineering 149 Commonwealth Drive | Menlo Park, CA 94025 (650) 688-7391 tel | [email protected] Professional Profile Dr. James specializes in failure analysis, failure prevention, and integrity assessment of engineering structures and components. His specific expertise includes metallurgy, materials science, fracture, fatigue, material degradation, corrosion, life prediction, and design. In his many years of engineering experience, Dr. James has conducted thousands of failure analysis investigations on widely varying engineering structures, ranging from miniscule medical devices to power- plant components. Dr. James also helps clients from various industries prevent failures, assess the integrity of their designs or equipment, as well as interact with governmental agencies. Dr. James has special interest in fractography, fracture mechanics, wear, corrosion, embrittlement phenomena, microstructural development, heat treatment, material selection, and welding and joining. The common thread in each of Dr. James' investigations is the application of metallurgical, materials science, and engineering mechanics fundamentals to help understand and solve complex problems. Dr. James has taught several graduate-level fracture mechanics and failure analysis courses at Stanford and Santa Clara Universities. He has also taught several courses for The American Society for Materials (ASM International) involving failure analysis, design, and life prediction/validation
    [Show full text]
  • The Effects and Economic Impact of Corrosion
    © 2000 ASM International. All Rights Reserved. www.asminternational.org Corrosion: Understanding the Basics (#06691G) CHAPTER 1 The Effects and Economic Impact of Corrosion CORROSION is a natural process. Just like water flows to the lowest level, all natural processes tend toward the lowest possible energy states. Thus, for example, iron and steel have a natural tendency to com- bine with other chemical elements to return to their lowest energy states. In order to return to lower energy states, iron and steel frequently combine with oxygen and water, both of which are present in most natu- ral environments, to form hydrated iron oxides (rust), similar in chemi- cal composition to the original iron ore. Figure 1 illustrates the corro- sion life cycle of a steel product. Finished Steel Product Air & Moisture Corrode Steel & Form Smelting & Rust Refining Adding Giving Up Energy Energy Mining Ore Iron Oxide (Ore & Rust) Fig. 1 The corrosion cycle of steel © 2000 ASM International. All Rights Reserved. www.asminternational.org Corrosion: Understanding the Basics (#06691G) 2 Corrosion: Understanding the Basics The Definition of Corrosion Corrosion can be defined in many ways. Some definitions are very narrow and deal with a specific form of corrosion, while others are quite broad and cover many forms of deterioration. The word corrode is de- rived from the Latin corrodere, which means “to gnaw to pieces.” The general definition of corrode is to eat into or wear away gradually, as if by gnawing. For purposes here, corrosion can be defined as a chemical or electrochemical reaction between a material, usually a metal, and its environment that produces a deterioration of the material and its proper- ties.
    [Show full text]
  • Introduction Engineering 360.826.4570 Nwcorrosion.Com Jeremy Hailey, P.E
    Jeremy Hailey Northwest Corrosion Introduction Engineering 360.826.4570 nwcorrosion.com Jeremy Hailey, P.E. • Corrosion Engineer with 16 years experience • Started NW Corrosion Engineering 10 years ago • Focus on corrosion control system designs, troubleshooting, and some installation work • Conduct training seminars and classes for Steel Tank Institute, National Association of Corrosion Engineers, and the American Water Works Ass’n. • NACE Certified Corrosion Specialist, Cathodic Protection Specialist, and Certified Coating Inspector Jeremy Hailey Northwest Corrosion Topics of Discussion Engineering 360.826.4570 nwcorrosion.com 1. Corrosion Theory 2. Methods of Corrosion Control 3. Corrosion Protection Criteria 4. Considerations for Design of Corrosion Control Systems Jeremy Hailey Northwest Corrosion Corrosion Theory Engineering 360.826.4570 nwcorrosion.com All materials have various physical properties – Color, hardness, ductility, shear strength, ability to conduct heat, melting point, electrical potential….. Corrosion in metal occurs because of an electrical imbalance, or electrical potential difference. Much like when two beakers of water, each at a different temperature, are poured together the resulting temperature will be somewhere between the two starting temperatures. Jeremy Hailey Northwest Corrosion Requirements of a Corrosion Cell Engineering 360.826.4570 nwcorrosion.com For corrosion to occur, four individual items must be present: 1. Anode – The place where corrosion occurs; the more electronegative site 2. Cathode
    [Show full text]
  • State of the Art Cathodic Protection Practices and Equipment State of the Art
    State of the Art Cathodic Protection Practices and Equipment State of the Art Definition: The level of development (as of a device, procedure, process, technique, or science) reached at any particular time usually as a result of modern methods Cathodic Protection 9 Type 9 Materials 9 Installation 9 Monitor / Survey Techniques Types of Cathodic Protection Sacrificial Anode ¾Small Current Requirement • Well Coated Structures • Isolated Structures ¾Low to Medium Soil Resistivity Types of Cathodic Protection Impressed Current ¾ Large Current Requirement • Poorly Coated Structures • Shorted Structures ¾ High Soil Resistivity Sacrificial Anodes Magnesium & Zinc Typical Sacrificial Anode Zinc Ribbon TYPICAL SACRIFICIAL ANODE INSTALLATION SINGLE ANODE MULTIPLE ANODE GRADE GRADE PIPE PIPE AT PIPE DEPTH TO 5' TYPICAL ANODE ANODE ANODE ANODE 10'-15' MIN 5' TO 15' ANODE FOR MAGNESIUM TYPICAL 5' MIN FOR ZINC 5' MIN Typical Sacrificial Anode Installation Typical Sacrificial Anode Installation Typical Sacrificial Anode Installation Ribbon Anode Impressed Current Rectifier ¾ Constant Voltage ¾ Constant Current ¾ Auto Potential ¾ Pulse ¾ Alternative Power ¾Solar ¾ Thermo Electric ¾ Wind ¾ Hydro Impressed Current Anode Graphite Impressed Current Anode High Silicon Cast Iron Impressed Current Anode Mixed Metal Oxide TYPICAL IMPRESSED CURRENT ANODE INSTALLATION DISTRUBUTED PIPE PIPE - RECTIFIER + ANODE ANODE ANODE ANODE ANODE ANODE TYPICAL IMPRESSED CURRENT ANODE INSTALLATION REMOTE RECTIFIER ANODES - + PIPE 200' TO 500' TYPICAL TYPICAL IMPRESSED CURR 50'
    [Show full text]
  • Cathodic Protection
    December 6, 2016 Bridge Preservation in Corrosive Environments Using Cathodic Protection Transportation Research Board Webinar Presenters: Atiq H. Alvi, PE T.Y. Lin International Ivan Lasa Florida Department of Transportation Ali Akbar Sohangpurwala Concorr, Inc. Statistics Cost of Corrosion Corrosion Comprehensive Study 2002 Corrosion Costs and Preventive Strategies in the United States” PUBLICATION NO. FHWA-RD-01-156 Corrosion Total Direct Cost of Corrosion in the U.S. $276 billion per year = 3.1% of GDP Corrosion Costs and Preventive Strategies in the United States” PUBLICATION NO. FHWA-RD-01-156 Corrosion • 587,964 Bridges • Average Age = 40 years • 40% are ate least 40 years or older • 14% Structurally Deficient w/ Corrosion as Primary Cause • Cost to maintain $5.8 billion per year • Cost to improve $10.6 billion • Cost of corrosion to bridges $8.29 billion (not including cost to traveling public) Corrosion Costs and Preventive Strategies in the United States” PUBLICATION NO. FHWA-RD-01-156 Overview of the Corrosion Process Corrosion Process Four Components Needed for Corrosion Process • Electrolyte • Anodic Reaction • Cathodic Reaction • Electrical Path Corrosion Process Metals Return to Nature • Natural Ores Combined with Oxygen, Sulfur, etc. • Smelting Process • Extracted Metallic Materials • Eventually Return to Natural Condition - Corrosion Corrosion Process Ores in Natural State Corrosion Process Smelting Process Corrosion Process Extracted Metallic Materials Corrosion Process Eventual Return to Natural Condition Corrosion
    [Show full text]
  • CORROSION PROTECTION PROVIDED by TRIVALENT CHROMIUM PROCESS CONVERSION COATINGS on ALUMINUM ALLOYS By
    CORROSION PROTECTION PROVIDED BY TRIVALENT CHROMIUM PROCESS CONVERSION COATINGS ON ALUMINUM ALLOYS By Liangliang Li A DISSERTATION Submitted to Michigan State University in partial fulfillment of the requirements for the degree of Chemical Engineering – Doctor of Philosophy 2013 ABSTRACT CORROSION PROTECTION PROVIDED BY TRIVALENT CHROMIUM PROCESS CONVERSION COATINGS ON ALUMINUM ALLOYS By Liangliang Li High strength aluminum alloys are widely used in aviation and aerospace industries because of their desirable strength/weight ratio that results from the alloy addition ( e.g. , Cu, Fe etc ). However, this alloy addition causes pitting corrosion of the aluminum surrounding those intermetallic inclusions. One efficient way to inhibit the corrosion is through the protective coating system that contains the topcoat, primer, and conversion coating. The conversion coating is in direct contact with the alloy surface and is expected to provide both good corrosion protection and adhesion. The chromate conversion coating (CCC) has been widely used in aviation/aerospace industry and provides excellent active corrosion protection and adhesion to aluminum alloys. Unfortunately, the Cr(VI) is toxic and chromate is a carcinogen. Therefore, a trivalent chromium process (TCP) coating was developed as a drop-in replacement of CCC. This dissertation focuses on a fundamental understanding of the formation mechanism, chemical structure, and basic electrochemical properties of the TCP coating on three high strength aluminum alloys: AA2024-T3, AA6061-T6, and AA7075- T6. The formation of the TCP coating is driven by an increase in the interfacial pH. The coating is about 50-100 nm thick and has a biphasic structure consisting of a 3- ZrO 2/Cr(OH) 3 top layer and an AlF 6 /Al(OH) 3 interfacial layer.
    [Show full text]
  • Underground Storage Tank Management Division Galvanic (Sacrificial Anode) Cathodic Protection System Evaluation
    Underground Storage Tank Management Division Galvanic (Sacrificial Anode) Cathodic Protection System Evaluation This form must be utilized to evaluate underground storage tank (UST) cathodic protection systems in South Carolina. Access to the soil directly over the cathodically protected structure that is being evaluated must be provided. A site drawing depicting the UST cathodic protection system and all reference electrode placements must be completed. I. UST OWNER II. UST FACILITY Name: Name: ID#: Address: Address: City: State: City: County: III. CP TESTER IV. CP TESTER’S QUALIFICATIONS Tester’s Name: NACE International Certification#: Company Name: Certification Date: Type of Certification: Address: Source of Certification: City: State: Other (Explain): V. REASON SURVEY WAS CONDUCTED (mark only one) o Routine-3 year o Routine-within 6 months of installation o 60-day re-survey after fail o Re-survey after repair/modification Date next cathodic protection survey must be conducted by _____________(required within 6 months of installation/repair & every 3 years thereafter) VI. CATHODIC PROTECTION TESTER’S EVALUATION (mark only one) o PASS All protected structures at this facility pass the cathodic protection survey and it is judged that adequate cathodic protection has been provided to the UST system (indicate all criteria applicable by completion of Section VIII). o FAIL One or more protected structures at this facility fail the cathodic protection survey and it is judged that adequate cathodic protection has not been provided to the UST system (complete Section IX). o INCONCLUSIVE If the remote and the local do not both indicate the same test result on all protected structures (both pass or both fail), inconclusive is indicated and the survey must be evaluated and/or conducted by a corrosion expert (complete Section VII).
    [Show full text]
  • Guidelines for Field Installation of Corrosion Monitoring and Cathodic Protection Systems
    Technical Memorandum No. MERL-2012-40 Guidelines for Field Installation of Corrosion Monitoring and Cathodic Protection Systems U.S. Department of the Interior Bureau of Reclamation December 2012 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Technical Memorandum No. MERL-2012-40 Guidelines for Field Installation of Corrosion Monitoring and Cathodic Protection Systems U.S. Department of the Interior Bureau of Reclamation December 2012 BUREAU OF RECLAMATION Technical Service Center, Denver, Colorado Materials Engineering and Research Lab Group, 86-68180 Technical Memorandum No. MERL-2012-40 Guidelines for Field Installation of Corrosion Monitoring and Cathodic Protection Systems 8/2 --------Mfed:r Daryl A. Little Date "Materials Engineer, Materials Engineering and Research Lab Group, 86-68180 Z- Che1648: Jessica D. Tor� Date Materials Engineer, Mats Engineering and Research Lab Group, 86-68180 � Editorial Approval: Teri Manross Date Technical Writer-E 'tor, Client Support and Technical Presentations Office, 86-68010 ( Technic�oval: Lee E. Sears� Date Material ngineer, Materials Engineering and Research Lab Group, 86-68180 ///7 �- Peer Review: William F. Kepler, P.E. Date Civil Engineer, Materials Engineering and Research Lab Group, 86-68180 REVISIONS l l d Date Description d e ica va ke ar c ro iew hn c he Rev Prep Peer C Te App Contents Page Chapter I: Introduction........................................................................................1 Corrosion Monitoring and Cathodic Protection Systems ................................
    [Show full text]
  • Corrosion Basics
    CORROSION BASICS (from Swain (1996) and Schultz (1997)) What is corrosion? • Webster’s Dictionary - corrode (v.) To eat away or be eaten away gradually, especially by chemical action. • NACE Corrosion Basics - corrosion may be defined as the deterioration of a material (usually a metal) because of a reaction with the environment. Why do metals corrode? Most metals are found in nature as ores. The manufacturing process of converting these ores into metals involves the input of energy. During the corrosion reaction the energy added in manufacturing is released, and the metal is returned to its oxide state. Metal Ore reduction (add electrons)→ Metal oxidation (strip electrons)→ Corrosion Products In the marine environment, the corrosion process generally takes place in aqueous solutions and is therefore electrochemical in nature. Corrosion consequences Economic - corrosion results in the loss of $8 - $126 billion annually in the U.S. alone. This impact is primarily the result of: 1. Downtime 2. Product Loss 3. Efficiency Loss 4. Contamination 5. Overdesign Safety / Loss of Life Corrosion can lead to catastrophic system failures which endanger human life and health. Examples include a 1967 bridge collapse in West Virginia which killed 46. The collapse was attributed to stress corrosion cracking (SCC). In another example, the fuselage of an airliner in Hawaii ripped open due to the combined action of stress and atmospheric corrosion. Corrosion cell Corrosion occurs due to the formation of electrochemical cells. In order for the corrosion reaction to occur five things are necessary. If any of these factors are eliminated, galvanic corrosion will not occur. THIS IS THE KEY TO CORROSION CONTROL! The necessary factors for corrosion to proceed are: 1.
    [Show full text]