DOCSLIB.ORG

Ladle Metallurgy

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ladle Metallurgy Materials Research and Engineering Edited by B. Ilschner and N.J. Grant Julian Szekely Goran Carlsson Lars Helle Ladle Metallurgy With 137 Figures and 24 Tables Springer-Verlag New York Berlin Heidelberg London Paris Tokyo Prof. JULIAN SZEKELY GQRAN CARLSSON Department of Materials Science MEFOS, The Metallurgical Research Plant and Engineering P.O. Box 812 Massachusetts Institute of Technology S 951 28 Lulea, Sweden Cambridge, MA 02139/USA LARS HELLE OVAKO STEEL Oy Ab SF 55100 Imatra, Finland Series Editors Prof. BERNHARD ILSCHNER Laboratoire de Metallurgie Mecanique Departement des Materiaux, Ecole Poly technique Federale CH -1007 Lausanne/Switzerland Prof. NICHOLAS J. GRANT Department of Materials Science and Engineering Massachusetts Institute of Technology Cambridge, MA 02139/USA Library of Congress Cataloging-in-Publication Data Szekely, Julian, 1934- Ladle metallurgy/Julian Szekely, G6ran Carlsson, Lars Helle. p. cm.-(Materials research and engineering) Bibliography: p. ISBN-13: 978-1-4612-8147-4 e-ISBN-13: 978-1-4612-3538-5 DOl: 10.1007/978-1-4612-3538-5 I. Inoculation (Founding) 2. Steel founding. I. Carlsson, G6ran. II. Helle, Lars. III. Title IV. Series. TS233.s981988 671.2-dc19 88-20017 Printed on acid-free paper. All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer-Verlag, 175 Fifth Avenue, New York, NY 10010, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use of general descriptive names, trade names, trademarks, etc. in this publication, even if the former are not especially identified, is not to be taken as a sign that such names, as understood by the Trade Marks and Merchandise Marks Act, may accordingly be used freely by anyone. © Springer-Verlag New York Inc. 1989 Softcover reprint of the hardcover I st edition 1989 Typesetting by Asco Trade Typesetting Ltd., Hong Kong. Editors' Preface This book seeks to provide a comprehensive coverage of the important and growing field of ladle metallurgy, including theory, practice, and economics. During the past decade, major advances have been made in the secondary metallurgy of steel and other metals; indeed, secondary metallurgy, that is, the ladle treatment of molten metals, following the melting and refining steps, has become an important and inevitable part of the overall processing sequence. Ladle metallurgy is attractive because it can provide an effective means for adjusting and fine-tuning the composition and temperature of the molten products prior to solidification processing. Ladle metallurgy allows us to produce materials of very high purity and will become increasingly an essential process requirement. Indeed, many of the novel casting techniques will mandate steels of much higher cleanliness than those in current practice. Of course, ladle metallurgy or secondary metallurgy is not limited to steel; indeed, major advances have been made and are being made in the secondary processing of aluminum, aluminum alloys, and many specialty metals. This book provides, for the first time, a comprehensive treatment of the subject, which includes both the science base and the many practical, real-world considera­ tions that are necessary for the effective design and operation of ladle metallurgy systems. The aim of the theoretical chapter is to provide insight and to develop the fundamental basis of ladle metallurgy systems. The chapter concerning practice reflects the many years of practical experience with the operation ofladle metallurgy systems. Finally, the chapter on economics provides a discussion on both the capital costs and the operating costs of secondary metallurgy systems. This book should be helpful to students of materials processing and to practicing metallurgists, in both the steel and the specialty metals fields. Cambridge, MA, USA, July 1988 N.J. Grant Lausanne, Switzerland, July 1988 B. Ilschner Contents 1 Overview of Injection Technology G6ran Carlsson .............................................. 1.1 Introduction ................................................ 1 1.2 Apparatus .................................................. 1 1.3 Hot Metal Pretreatment ...................................... 4 1.4 Steel Refining ............................................... 8 1.5 Foundry.................................................... 23 1.6 Copper..................................................... 23 1.7 Aluminium ................................................. 24 1.8 Ferro Alloy ................................................. 24 References . 25 2 The Fundamental Aspects of Injection Metallurgy Julian Szekely ................................................ 27 2.1 Introduction ................................................ 27 2.2 Thermodynamics ............................................ 27 2.3 Gas and Solids Delivery ...................................... 40 2.4 Injection of Particles into Melts ................................ 50 2.5 The Kinetics of Ladle Metallurgy Operations .................... 54 2.6 Fluid Flow and Mixing in Ladle Metallurgy Systems .............. 56 2.7 Convective Mass Transfer and Kinetics ......................... 64 2.8 Heat Transfer ............................................... 68 References ................................... 71 3 Injection Practice in the Secondary Metallurgy of Steel Lars Helle .................................................... 73 3.1 Introduction ................................................ 73 3.2 Description of the Process .. 73 3.3 Theoretical Approach to Powder Injection ....................... 101 3.4 Discussion of the Results Obtained with Powder Injection . 110 3.5 Costs and Productivity ....................................... 145 3.6 Future Aspects .............................................. 145 References. 147 4 Economic Considerations G6ran Carlsson ............................................... 151 viii Contents 4.1 Introduction ................................................ 151 4.2 Unit Price .................................................. 151 4.3 Consumption ............................................... 151 4.4 Capital Costs. 151 4.5 Economic Interactions with Other Processes ..................... 152 5 Testing Technique for Powder Injection Goran Carlsson ............................................... 154 5.1 Dry Blowing Tests ........................................... 154 5.2 Screen Analysis .............................................. 155 5.3 Hand Test of Powder Material ................................. 157 5.4 Water Model Tests. 157 5.5 Angle of Repose ............................................. 162 References . 163 Subject Index. 165 1 Overview of Injection Technology Goran Carlsson 1.1 Introduction Treating steel in the ladle is as old as the use of ladles in steelmaking. The main purposes for ladle treatment of hot metal and liquid steel include desulphurization, deoxidation, alloying, and inclusion shape control. One of the first ordinary ladle metallurgical processes was the Perrin process [1], in which steel was tapped into a ladle containing premelted slag. The kinetic energy of the steel was used to produce a large reaction surface and intensive stirring in the ladle. A very efficient method for the treatment ofliquid metal is injection of a powdered reagent or alloy. Already in his time, Sir Henry Bessemer [2] suggested that powdered material should be added to the steel. In the 1930s and 1940s, injection of powdered material was used in many different ways. One example from the iron and steel industry is lime powder injection into hot metal for desulphurization. Petersen and co-workers [3] have reported on the use of burnt lime for desulphuri­ zation. In the 1950s, the injection technique was introduced in foundries. The main purpose was desulphurization and alloying with magnesium. During that decade, injection metallurgy was not yet a great success, mainly owing to technical problems. A new era for injection metallurgy started in the late 1960s. The technique was developed and improved in many ways and in many countries, for example, in Sweden, the Federal Republic of Germany, and France, at the same time. The advantages of adding powdered material deeply into liquid metal are that metal­ lurgical operations can thereby be carried out faster, with higher yields, with better reproducibility, and to meet special requirements for the products. In this chapter, some ideas will be given on how injection techniques are used in different metal industries. 1.2 Apparatus An injection equipment system consists schematically of a powder dispenser, trans­ portation hose, and lance (Fig. 1.1). In the industry, it is usually completed with containers and silos for rational handling of the powder. The powder dispenser is a high-pressure vessel with a conical lower part. The powder-gas mixture is pressed through a small hole and into an ejector, where the carrier gas is added. The fluidization of the powder is done in order to break up the powder so that the transportation of it from the dispenser will be uniform. The carrier gas used for 2 1 Overview of Injection Technology Fig. 1.1. Skeleton sketch of an injection in­ stallation: 1, powder dispenser; 2, transpor­ tation hose; 3, lance; 4, ladle or furnace; 5, 3 2 carrier gas; 6,
Load more

Recommended publications
  • Heart of Gold Lesson Plan Year 7
    Heart of Gold Lesson Plan Year 7 Lesson 1 Separation of Gold Curriculum Links: (ACSSU112) / Year 7 / Science / Science Understanding / Chemical Sciences (ACSSU222) / Year 7 / Science / Science Understanding / Earth and Space Sciences (ACSHE119) / Year 7 / Science / Science as a Human Endeavour / Nature and Development of Science (ACSHE121) / Year 7 / Science / Science as a Human Endeavour / Use and Influence of Science Background Information: It is actually quite unusual to find large nuggets of gold and most gold prospectors actually need to separate gold out from lots of other material. Depending on where the gold is found, this may be done by panning or through dry blowing. Each of these methods relies on the property of density. As gold has a very high density compared to the rock, soil and sediments it is contained in, it can be separated out by exploiting this property as it will fall to the bottom of mixtures that are allowed to settle out. The process of panning is used when small pieces of gold are found in creeks and rivers. It involves using a large shallow dish (pan) to scoop out some of the sediments in the riverbed and a small amount of water. You use a swirling motion with the pan tipped away from you and allow small amounts of the sediments and water to spill over the edge of the pan. When you have only a small amount of the sediments remaining in the pan, you will be able to see any gold particles that remain at the bottom of the pan. During the West Australian gold rush, most of the gold was being found in dry areas and water was a scarce commodity.
    [Show full text]
  • GOLDFAN West Perth, W.A
    2nd Floor, 45 Richardson Street, West Perth, Western Australia 6005 P.O. Box 893, GOLDFAN West Perth, W.A. 6005 Tel: (09) 322 2788 LTD Fax: (09) 481 1669 (Inc. in WA.) ly NOTICE OF INTENT THREE MILE HILL PROJECT COOLGARDIE MINERAL FIEL) r'rt T%T) ).T 1 L - VOLUME 1 CONTENTS VOLUME I PAGE 1.0 GENERAL SUMMARY I 2.0 GENERAL INTRODUCTION 3 3.0 GENERAL AND ENVIRONMENTAL STATUS 4 3.1 LOCATION AND ACCESS 4 3.2 TENEMENT OWNERSHIP 4 3.2.1 Mine and Milisite Area 4 3.2.2 Borefield and Pipeline 4 3.3 PROSPECT HISTORY 4 3.3.1 Early Mining 4 3.3.2 Modern Day Activities 5 3.3.3 Goldfan Ltd Activities 5 3.4 ENVIRONMENTAL STATUS 5 3.4.1 Regional Setting 5 3.4.2 Geomorphology 6 3.4.3 Climate 6 3.4.4 Hydrology 7 3.4.4.1 Three Mile Hill 7 3.4.4.2 Roger Spring Borefield Area 7 3.4.5 Flora 8 3.4.6 Fauna 8 3.5 GEOLOGY AND RESOURCES 8 3.5.1 Sub-Regional Geology 8 3.5.2 Local Geology, Structure, Stratigraphy 9 3.5.3 Lithology and Host Unit Characteristics 9 3.5.4 Mineralisation 10 3.5.5 Mineral Resources io 4.0 MINING AND MINESITE REHABILITATION 12 4.1 MINING OBJECTIVE AND SCOPE 12 4.2 GEOTECHNICAL ASPECTS 12 4.3 OPEN PIT OPERATIONS 13 4.3.1 General Open Pit Scheme 13 4.3.2 Drill and Blast Operations 13 4.3.3 Final High Wall Reinforcement 14 4.3.4 Decline 14 4.3.5 Ore and Waste Haulage 14 4.3.6 Dust Suppression is 4.4 OVERBURDEN MANAGEMENT AND REHABILITATION 15 4.4.1 Topsoil Recovery and Storage 15 4.4.2 Overburden Dumping 15 4.4.3 Rehabilitation 15 F CONTENPS VOLUME I PAGE 5.0 ORE PROCESSING, WATER SUPPLY & TAILINGS 16 5.1 ORE PROCESSING 16 5.1.1 Crushing Circuit 16 5.1.2 Grind and Gravity Circuit 16 5.1.3 Flotation and Regrind Circuit 16 5.1.4 CIP General 17 5.1.5 Leach and Adsorption Circuit 17 5.1.6 Carbon Desorption and Re-Activation 17 5.1.7 Gold Room 18 5.2 PROCESS WATER BOREFIELD AND PIPELINE 18 5.2.1 Borefield 18 5.2.2 Pipeline 19 5,3 TAILINGS DISPOSAL DAMS 19 5.3.1 TD1 19 5.3.2.
    [Show full text]
  • Name, a Novel
    NAME, A NOVEL toadex hobogrammathon /ubu editions 2004 Name, A Novel Toadex Hobogrammathon Cover Ilustration: “Psycles”, Excerpts from The Bikeriders, Danny Lyon' book about the Chicago Outlaws motorcycle club. Printed in Aspen 4: The McLuhan Issue. Thefull text can be accessed in UbuWeb’s Aspen archive: ubu.com/aspen. /ubueditions ubu.com Series Editor: Brian Kim Stefans ©2004 /ubueditions NAME, A NOVEL toadex hobogrammathon /ubueditions 2004 name, a novel toadex hobogrammathon ade Foreskin stepped off the plank. The smell of turbid waters struck him, as though fro afar, and he thought of Spain, medallions, and cork. How long had it been, sussing reader, since J he had been in Spain with all those corkoid Spanish medallions, granted him by Generalissimo Hieronimo Susstro? Thirty, thirty-three years? Or maybe eighty-seven? Anyhow, as he slipped a whip clap down, he thought he might greet REVERSE BLOOD NUT 1, if only he could clear a wasp. And the plank was homely. After greeting a flock of fried antlers at the shevroad tuesday plied canticle massacre with a flash of blessed venom, he had been inter- viewed, but briefly, by the skinny wench of a woman. But now he was in Rio, fresh of a plank and trying to catch some asscheeks before heading on to Remorse. I first came in the twilight of the Soviet. Swigging some muck, and lampreys, like a bad dram in a Soviet plezhvadya dish, licking an anagram off my hands so the ——— woundn’t foust a stiff trinket up me. So that the Soviets would find out.
    [Show full text]
  • Wendt Corporation Ex. 1003, P. 1 Wendt Corporation Ex
    Wendt Corporation Ex. 1003, p. 1 Wendt Corporation Ex. 1003, p. 2 Wendt Corporation Close Dec., Ex. A HANDBOOK OF .· RECYCLING TECHNIQUES Alfred Arn. Nijkerk and Wijnand L. Dalmijn The Hague, March 1998 Fourth printing .. Wendt Corporation Close Dec., Ex. A First printing, November 1995 Second printing, February 1996 Third printing, September 1996 Fourth, revised and expanded printing, March 1998 The Royal Library of The Hague Cataloguing-in-Publication Data Nijkerk, A.A Handbook of Recycling Techniques I A.A. Nijkerk. - The Hague Nijkerk Consultancy. - Ill. Published at the request of NOVEM/NOH. - With bibliography and index ISBN 90-802909-2-0 NUGI 841 Keyword: recycling © copyright: Nijkerk Consultancy 1998 All rights reserved. No part of this book may be reproduced and/ or transmitted, by means of print, photocopy, microfilm or otherwise, in total or in part, without the written permission of the copy­ right holder or the publisher. Cover photo: Demolition of a 25-year-old Sabena Boeing 747 at Brussels Zaventhem airport. The airplane was scrapped by a hydraulic LaBounty MSD 116 crane-attached shear of 650 tonnes cutting force, with a Verachtert/ Veratech connecting arm and a Verachtert/Veratech, crane-attached shear. The excavators are Hitachi EX 400s. PHOTOGRAPH BY COURTESY OF VAN LEEUWEN RECYCLING, ROTTERDAM, THE NETHERLANDS. 2 -· Wendt Corporation Close Dec., Ex. A Handbook of Recycling Techniques by Alfred Arn. Nijkerk and Wijnand L. Dalmijn This book was written within the framework of the Dutch National Reuse of Waste Research Programme (NOH). Project number: NOH/353293/0710 Management and co-ordination of the NOH programme rest with: NOVEM Netherlands Agency for Energy and the Environment RIVM National Institute of Public Health and Environmental Protection The authors can give no guarantee of the accuracy and/ or comprehensive nature of information, designs, constructions, products or production methods arising or described in this book, nor of their suitability for any given specific application.
    [Show full text]
  • David Woodiwiss - Submission Number 1
    Sub 8 David Woodiwiss - Submission Number 1 DAVID WOODIWISS PO BOX 2032, BOULDER, WESTERN AUSTRALIA, 6432 PH: 0408 909 333 FAX: 08 9093 3355 Email: [email protected] To:- The Standing Committee on Legislation:- Inquiry into the Mining Legislation Amendment Bill 2015 Postal Address:- Mr David Driscoll Parliamentary Officer (Committees) Standing Committee on Legislation GPO: Box A11 Perth WA 6837 Phone Number: 08 9222 7404 Fax Number: 08 9222 7805 Email Address: [email protected] PROSPECTING and SMALL MINING ACTIVITIES MINE SHAFTS, SMALL OPEN PITS, PROCESSING PLANT AND ASSOCATED INFRASTRUCTURE Introduction Prospecting and small mining operations by way of shafts and small open pits is the long established method of operating by prospectors and small miners. This is common to all goldfields and in particular to Western Australian Goldfields since mining began here over 120 years ago in 1885 Mining Amendments Act 2015 These proposed Amendments are for the benefit of the large corporate miners. The Amendments ignore the needs of the small miner. The following gives some background detail to the operations of the small miner Prospecting and Exploration Prospecting for gold takes place in many ways. Examples of these are the sampling of rock chips and soils, loaming, augering, pitting, costeaning, drilling, dishing, dry blowing, detecting and assaying of samples and rocks in the quest for a source of payable quantities of ore. When there are good indications that gold, or other mineralisation, has been discovered, the small miner will sink a shaft or excavate a small open pit in his quest to find an orebody.
    [Show full text]
  • Super Pit Shop Relocated to Hannans North
    ISSUE 56 | JANUARY 2013 P. 3 P. 3 P. 4 SUPER PIT SHOP RELOCATED TO HANNANS NORTH KCGM showed its ongoing 2013, with roles for shop helpers, continue to run tours and provide commitment to local tourism this information personnel and tour information about our operations month, relocating the Super Pit Shop guides. Training will be provided for on Boulder Market Days. Now based to the Hannans North Tourist Mine. anyone who would like to help out at the Eastern Goldfields Historical The move is designed to assist in and hours will be recorded under Society (next to Loopline Park on the revitalisation of the existing Hall the KCGM Volunteers Programme. Hamilton St), tours leave hourly of Fame attractions as a sustainable This is a great opportunity to be from 9am-12pm. After the tour, tourism destination. The Super Pit part of a new and exciting venture, volunteers at the historical society Shop is now open to the public, and develop new skills and have some stage a dry blowing demonstration, other attractions at the site will be fun while meeting and working one of the methods used by early reopened in stages as maintenance with a range of great people. To miners in the region, and there are and repair work is completed. get involved contact the Super Pit historic records and homemade Shop on 9022 1664 and register as a treats on offer inside. There are still volunteer. plenty of opportunities for KCGM “THE MOVE IS Volunteers on Boulder Market Days Although the Super Pit Shop as tour guides and helping out on DESIGNED TO ASSIST has moved from Burt Street, we the tour desk.
    [Show full text]
  • Environmental Assessment for Golden Sunlight Mining, Inc., Application
    Digitized by the Internet Archive in 2013 http://archive.org/details/environmentalass31mont 3^^-^ Rn7rMAM PlIDIir i.noAow '"'1195? BOIlim PUBLIC LIBRARY EN ^V I R O NIM EN T ^^VX^ ^^^SSESSiVlElSTT for Golden Sunlight Mining, Inc. Application for Anendcent State Operating Permit No. 00065 and Federal Plan of Operations Stage IV and V Mining Operating and Reclamation Plan prepared by Montana Department of State Lands and U.S. Department of Interior Bureau of Land Management pursuant to the Montana Environmental Polict Act and the National Environmental Policy Act May 30, 1990 3 0864 1006 3080 8 . TABLE OF CONTENTS CHAPTER I - INTRODUCTION 1 A. Purpose and Need 1 B. Permitting History 5 C. Summ£Lry of Proposed Amendment 5 D. Location and Land OuTiership 11 E. Environmental Analysis History 11 F. Related Actions 12 G. Agency Responsibilities 12 1. Department of State Lands 12 2. Bureau of Land Management 13 3. Other State Agencies 13 a. State Historic Preservation Office 13 b. Department of Health and Environmental Sciences 14 i. Air Quality Bureau 14 ii. Water Quality Bureau (W'QB) 14 c. Department of Natural Resources and Conservation (DNRC) 14 d. Hard-Rock Mining Impact Board 14 CHAPTER 11 - EXISTING ENVIRONMENT 13 A. Geology 13 B. Soils 14 1. Soil Developmental Setting 14 a. Parent Material/ Geology 14 b. Other Soil Forming Influences 15 2. Existing Soils 15 a. Proposed Tailing Impoundment II Area ... 15 b. North Waste Rock Dump Area 16 c. West and South Waste Rock Dump Areas . 20 C. Water Resources 20 1. Surface Water 20 2.
    [Show full text]
  • Getting Gold
    Getting Gold J. C. F. Johnson Getting Gold Table of Contents Getting Gold..............................................................................................................................................................1 J. C. F. Johnson..............................................................................................................................................1 PREFACE......................................................................................................................................................1 CHAPTER I. INTRODUCTORY..................................................................................................................2 CHAPTER II. GOLD PROSPECTING−−ALLUVIAL AND GENERAL...................................................7 CHAPTER III. LODE OR REEF PROSPECTING.....................................................................................11 CHAPTER IV. THE GENESIOLOGY OF GOLD−−AURIFEROUS LODES..........................................16 CHAPTER V. THE GENESIOLOGY OF GOLD−−AURIFEROUS DRIFTS..........................................22 CHAPTER VI. GOLD EXTRACTION.......................................................................................................27 CHAPTER VII. GOLD EXTRACTION−−SECONDARY PROCESSES AND LIXIVIATION..............37 CHAPTER VIII. CALCINATION OR ROASTING OF ORES.................................................................43 CHAPTER IX. MOTOR POWER AND ITS TRANSMISSION................................................................47 CHAPTER
    [Show full text]
  • The Albert Goldfield, Milparinka-Tibooburra, North-Western NSW
    Journal of Australasian Mining History, Vol. 5, September 2007 A Thirsty and Confusing Diggings: The Albert Goldfield, Milparinka-Tibooburra, north-western NSW By KEN MCQUEEN University of Canberra succession of scattered discoveries from 1880-1882, over a tract 50 miles long by 10 miles wide in the Grey Ranges of far north-western New South A Wales (Figure 1) saw the establishment of the Albert Goldfield. These alluvial diggings were amongst the last discovered in New South Wales and the first in the arid outback. They provided ‘poor man’s’ diggings where individual prospectors or small parties could recover payable gold without heavy capital outlays, by ‘raking’ the shallow gullies overlying the bedrock of the isolated ranges. At first the prospectors were confused by the occurrence of gold in widely scattered near-surface patches with no clearly defined leads or deep leads. Some good deep leads were eventually found and worked, but were then abandoned due to flooding water. Gold-bearing quartz reefs were also found, but the cost of fully developing these in this remote region proved too much for the small companies involved. Prospectors faced enormous difficulties in the hot, dry terrain (summer temperatures commonly over 100º F and average annual rainfall of 6.5 inches); the most serious being shortage of water for both mining and domestic purposes. However, periodic downpours and flash flooding also adversely affected mining operations. During the numerous dry periods the miners had to stack their washdirt and simply wait for rain, or resort to the tedious and inefficient process of dry blowing.
    [Show full text]
  • GOLD PLACERS and PLACERING in ARIZONA by Eldred D
    GOLD PLACERS AND PLACERING IN ARIZONA by Eldred D. Wilson Bulletin 168 Reprinted 1981 - State ofArizona Bureau of Geology and Mineral Technology Geological Survey Branch A Division of the University of Arizona TABLE OF CONTENTS PAGE PREFACE 8 PREFACE TO BULLETIN No. 160 . 8 PREFACE TO BULLETIN No. 142 .... 9 PART I ARIZONA GOLD PLACERS GENERAL FEATURES OF GOLD PLACERS ...........................•.........•...........•......._... 11 Origin 11 Distribution of Arizona gold placers.................................................... 12 Relatipn to pediments 12 Relation to streams 14 Relation to geology and types of veins.................................................. 14 Yearly rainy seasons of Arizona.............................................................. 15 HISTORY OF ARIZONA GOLD PLACER MINIm;.................................................... 15 Summary 15 Early production 15 Production after 1900 16 YUMA COUNTY ....•...................•.............•.•.••••...•••••••.••.••••.••••••..••..••••••••.•••••••••••••••• 18 Copyright© 1961 Districts 18 Production 18 The Board of Regents of the Universities and Gila City or Dome placers 18 I,aguna placers 21 State College of Arizona. All rights reserved. Muggins placers 22 Castle DOIne placers 23 Kofa or S. H. placers.................................................................................. 23 Tank Mountains placers 24 Trigo placers 25 La Paz placers 25 Plomosa. district 29 La Cholla placer area 29 Oro Fino placer area 30 Middle Camp placer area 31 PIOlnosa placer area 31 Harquahala
    [Show full text]
  • Half-Yearly Report 2012 Six Months Ended 30 June 2012 Xstrata Plc Half-Yearly Results 2012 | 1
    Half-Yearly Report 2012 six months ended 30 June 2012 Xstrata plc Half-Yearly Results 2012 | 1 Key Financial Results Six months to Six months to % $m 30.06.12 30.06.11 Change Revenue 15,550 16,777 (7) Operating EBITDA* 4,007 5,820 (31) Operating profit* 2,454 4,246 (42) EBIT* 2,439 4,254 (43) Attributable profit* 2,194 2,865 (23) Attributable profit 1,941 2,916 (33) Earnings per share (basic)* $0.75 $0.98 (23) Earnings per share (basic) $0.66 $1.00 (34) Dividends declared and paid per share 27.0¢ 20.0¢ 35 Dividends proposed per share 14.0¢ 13.0¢ 8 Net debt to net debt plus equity 19% 15% 27 Net assets 47,359 45,533 4 Net assets per share** $16.03 $15.53 3 * Excludes exceptional items ** Excluding own shares Highlights: Strong financial and operational performance despite cyclical downturn in commodity prices and ongoing cost inflation Good cost performance with real unit cost savings of $105 million. Significant additional cost saving opportunities identified in second half Improvement in second quarter volumes provides good momentum for stronger second half production as new projects are progressively commissioned $1.47 billion Antapaccay copper project reached commissioning on schedule and on budget with first copper on track for October Approval of $360 million (AUD360 million) Phase 3 expansion of Xstrata Zinc’s McArthur River Mine to produce average of 380,000 tonnes of zinc from 2014 from conventional concentrate In total, 10 major projects will commence commissioning on schedule by the end of 2012 across every commodity business,
    [Show full text]
  • The Aboriginal Prospectors and Miners of North Queensland's Gold
    The Aboriginal prospectors and miners of North Queensland’s Gold and Mineral fields, from pre-contact times to ca.1950. Galiina “Kal” Ellwood BA (USyd); Honours Archaeology (JCU); PhD Candidate Cultural Heritage, JCU MinErAL Meeting Cairns 2019 Kitty Pluto 1932, aged 55 (CHS) Tradition to present • Aborigines were miners • They also adapted other using sophisticated traditional technology to underground and pit mining mining eg. ‘yandying’ methods • They were integral to the • They used post-extraction north Queensland mining treatment processes industry as prospectors and • They had explanatory story miners for mineral occurrence • They adapted traditional knowledge of minerals, mining and treatment processes to post contact mining (technology transfer) Open pit mining at Lake Moondarra for greenstone axe material Marnbi’s journey (Bronzewing Pigeon, Phaps chalcopter) • Mining story • Creation of minerals • Gold eg Broken Hill, Tibooburra • Copper eg Cloncurry, Mt Isa • Grinding stones (sandstone) – eg. Mt Isa, Parachilna • Opals eg. Quilpie, White Cliffs, Cooper Pedy • Traded around Australia • Most of these – economic minerals for Europeans too Principal trade routes of pre-colonial Aboriginal Australia Zillmanton Mine and Marnbi Outcrop of the western ore body, Zillmanton Copper staining on a limestone boulder (Ray and Ellwood, 2014) • This is where the Marnbi story ends • He finally enters the ground in Chillagoe creek to the east of this copper deposit • This copper orebody was first prospected by an Aboriginal prospector 1. 3. In 1888 – George Henesy 2. Three copper specimens from the surface outcropping of the ore body (Ellwood, 2015) Economic minerals which are important both pre-contact and post-contact economies of the Chillagoe District.
    [Show full text]