DOCSLIB.ORG

Suppliers to the Garment Manufacturing Industry 107348 East08 IFC-Welcome:PG 1/5/09 09:30 Page 2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Suppliers to the Garment Manufacturing Industry 107348 East08 IFC-Welcome:PG 1/5/09 09:30 Page 2 107348_East08_FC-BC:Pg 1/5/09 09:38 Page FC2 2009 ...suppliers to the garment manufacturing industry 107348_East08_IFC-Welcome:PG 1/5/09 09:30 Page 2 We welcome you to Dear Customer, our teams in Huddersfield… Welcome to the 2009 Eastman Staples catalogue, the “One Stop …here to help you, when you want! Shop” for clothing manufacture. This year’s catalogue has been completely redesigned in a more contemporary manner to reflect a company that is constantly moving forward with the times. Containing products for use from design through cutting to finishing, including many component products and of course the world famous range of Eastman cutting machines. We manufacture a high percentage of the products that we sell which, combined with our bulk purchasing power for the rest of the product range, allows us to be competitively priced whilst maintaining high quality and providing fast response. Established in 1921, Eastman Staples has been a leader in its field for many decades. We are geared up to supply customers from the smallest size up to the largest bulk buying factories located anywhere in the world. Commercial Director I hope that you enjoy looking through our catalogue which with nearly 2,000 products shown will satisfy most requirements, but if there is any item that you cannot see, please do not hesitate to contact us and one of our highly experienced staff members will be happy to source it for you. Colin I Werb Managing Director Sales & Accounts Head Office: Machines Eastman Staples Limited 131 Lockwood Road Huddersfield England HD1 3QW tel: +44 (0) 1484 88 88 88 fax: +44 (0) 1484 88 88 00 email: [email protected] website: www.eastman.co.uk Parts …our UK Nationwide Delivery Fleet Deliveries where you want, when you want… Prices valid at time of going to press and may change without prior notification. Prices are shown ex. works exclusive of carriage, insurance and VAT W:www.eastmans.co.uk T:+44 (0) 1484 88 88 88 F:+44 (0) 1484 88 88 00 107348_East08_IFC-Welcome:PG 1/5/09 09:30 Page 3 Meet the Teams …our team in Glasgow Contact: WILLIAM McALLISTER Eastman Staples Limited, 2 - 4 Tannoch Place, West Lenziemill, Cumbernauld Glasgow Scotland G67 2XU tel: +44 (0) 1236 451 905 fax: +44 (0) 1236 451 906 email: [email protected] …our team in Dublin and N. Ireland Eastman Staples Limited, Unit G1 Croke Park Industrial Estate, Dublin 1. Ireland Dublin office Contact: PAT MAHON tel: +00 353 18557555 mob: +00 353 87 2584024 email: [email protected] N.Ireland office Contact: DARREN BOYLE mob: +07736 145326 email: [email protected] …our team in Poland Contact: SEBASTIAN STAWICKI UL Zbasznska 13 Lodz 91-342 Poland tel: +00 48 791031390 fax: +00 48 422980082 Consulta (Morocco) Contact: MADAME YOUSRA 625 Boulevard Mohamed V Casablanca Maroc tel: +00 212 522404517 fax: +00 212 522245894 Deliveries made using our own UK fleet where possible W:www.eastmans.co.uk T:+44 (0) 1484 88 88 88 F:+44 (0) 1484 88 88 00 107348_East08_Sec1_02-09:Pg 1/5/09 09:31 Page 2 Contents 01/Paper & Polythene Marker Papers, Plain, Heatseal, Spot & Cross 3 Specialist Plotter Papers, Plotter Pens, Heat Transfer 4 Specialist Marker Papers, Interleaving Tissue, Underlay 5 Polythene Film & Perforated Underlay for Automatic Cutters 6 Pattern Papers & Boards, Pleating Papers 7 Packaging & Janitorial Products 8 Garment Covers, Lay-Flat Tubing & Overbags 9 02/Accessories Dry Cleaning, Ironing, Laundry Supplies 10 - 11 Books, DVD’s 12 Drawing Equipment, Portfolios 13 Design & Pattern Cutting Equipment 14 - 15 Cutting Room Accessories 16 - 18 Hancock’s Marking Media, Repair Crayons 19 Scissors, Shears & Thread Clippers 20 - 21 03/Component Products Pads, Sleeve Head Shapes 22 Shoulder Pads, Raglan Pads 23 Overlocked Shoulder Pads 24 Bra Cups 25 Bra Pads 26 Bra Accessories, Corsetry 27 Linings 28 Interlinings 29 Facings, Braid, Undercollar 30 Waistband, Bias Binding 31 Fusible Tapes, Metal Buckles & Fittings 32 Hookflex Hooks & Bars, Press Studs 33 Tapes, Velcro, Elastic, Ribbons, Zips 34 04/Finishing Labels, Woven or Printed 35 Hangers & Hanger Accessories 36 - 37 Shirt Boards, Shirt Packaging, Table/Skirting Clips 38 - 39 Tag Guns, Ties, Security Loops, Cable Ties 40 Aerosols, Cleaning Products 41 Pressing, Ironing, Tailor Made Covers 42 05/Machines Band Knife Blades, Round Knife Blades 43 Straight Knife Blades 44 Sharpening Bands & Stones, Machine Oil 45 Automatic Cutting Systems Accessories 46 Health & Safety – Guards, Gloves, Metal Detection 47 Round Knives 48 Straight Knives 49 Hand Held Round Knives 50 End Cutters, Cloth Inspection & Measuring 51 Miscellaneous Machines 52 - 53 Eastman M9000, Automatic Cutting System 54 Spreaders 55 - 57 Sewing Machines 58 Bagging Machines 59 Sewing Machine Needles 60 - 61 Full Index 62 - 63 Notes 64 Terms & Conditions 65 2 E: [email protected] T: +44 (0) 1484 88 88 88 F: +44 (0) 1484 88 88 00 107348_East08_Sec1_02-09:Pg 1/5/09 09:31 Page 3 Marker Papers • Plain, Heatseal, Spot & Cross Paper & Polythene/01 CHB Hot-Melt Heatseal Plotter Paper - 62gsm Standard grade paper, a good all-rounder. CHB60 60" 152cm £88.00 CHB64 64" 162cm £97.35 CHB72 72" 182cm £105.00 250m per roll CHU Hot-Melt Heatseal Plotter paper - 70gsm Top quality grade paper. Best seller. CHU736 36" 91cm £46.46 CHU740 40" 101cm £50.11 CHU748 48" 122cm £62.19 CHU760 60" 152cm £80.00 CHU761 61" 155cm £82.50 CHU764 64" 162cm £88.50 CHU772 72" 182cm £95.50 CHU780 80" 202cm £110.00 250m per roll CP Plotter Paper - 60gsm PE Heatseal Paper - 55gsm Premium grade White paper, suitable for use on any plotter. Suitable for non-synthetic fabrics. Used extensively in the upholstery Can also be used for hand drawn markers. trade & can also be used as embroidery backing. CP30 30" 76cm £26.94 CH36 36" 91cm £46.05 CP36 36" 91cm £32.58 CH48 48" 122cm £59.14 CP48 48" 122cm £42.30 CH60 60" 152cm £73.61 CP60 60" 152cm £50.00 CH65 65" 165cm £79.71 CP65 65" 165cm £54.00 CH72 72" 182cm £88.32 CP72 72" 182cm £60.00 CH79 79" 201cm £97.51 CP79 79" 202cm £65.00 250m per roll 300m per roll Available in 500m rolls p.o.a Numberprint Hot-Melt Heatseal Paper - 70gsm CP50 Bondex Paper - 50gsm Top quality grade paper. SCHU736 36" 91cm £50.67 Good quality white paper, suitable for use on most plotters. Can also be used for hand drawn markers. SCHU760 60" 152cm £80.84 CP5036 36" 91cm* £28.46 SCHU764 64" 162cm £89.80 CP5048 48" 122cm £35.15 250m per roll CP5060 60" 152cm £43.52 CP5062 62" 155cm £44.30 Numberprint Hot-Melt Heatseal Paper - 62gsm CP5065 65" 165cm £47.16 Standard grade for use when producing hand drawn markers. CP5072 72" 182cm £52.23 SCHB60 60" 152cm £91.00 CP5079 79" 202cm £57.27 SCHB64 64" 162cm £97.00 300m per roll 250m per roll *250m per roll on this width only Available in 500m rolls to order IMPORTANT NOTE SC Spot & Cross - 60gsm Hot-Melt Heatseal adheres to most fabrics whilst PE Heatseal adheres mainly to non-synthetic fabrics. Used in the Design Room and as a master when making multiple hand If the iron temperature is too high it can result in the adhesive markers. Follow spot-cross-spot-cross for the grain line or spots- dropping off the paper causing marks and non-adherence. crosses for your 45º bias angle. If the iron temperature is too low the heatseal will not activate. SC30 30" 76cm £24.50 PE Heatseal requires a hot iron between 120ºC and 200ºC. SC36 36" 91cm £28.60 Hot-Melt Heatseal requires a cool iron between 90ºC and 150ºC. SC48 48" 122cm £36.80 SC60 60" 152cm £45.48 SC65 65" 165cm £48.82 SC72 72" 182cm £54.09 250m per roll CHV Hot-Melt Heatseal Plotter Paper - 68gsm Premium grade paper with translucency for matching checks & stripes. CHV36 36" 91cm £60.67 CHV60 60" 152cm £105.50 CHV64 64" 162cm £119.00 CHV72 72" 182cm £126.00 250m per roll W:W:www.eastmans.co.uk www.eastman.co.uk T: T:+44 +44 (0) 1484 88 88 88 F:F:+44 +44 (0)(0) 14841484 8888 8888 0000 3 107348_East08_Sec1_02-09:Pg 1/5/09 09:31 Page 4 01/Paper & Polythene Specialist Plotter Papers • Plotter Pens • Heat Transfer Gerber Accuplot 100 Plotter Premium grade White paper, suitable for use on any plotter. Can also be used for hand drawn markers. PEN2BK CPA62 Plain 62" 157cm 225m 60gsm £41.00 PENBLK CP5062 Plain 62" 157cm 300m 50gsm £44.30 CHU761 Heatseal 61" 155cm 250m 70gsm £82.50 Use PENGBK pens PENGBK Gerber SP150 Plotter PENGSUP CPA36 Plain 36" 91cm 225m 60gsm £34.00 Use PH0101 3mm fibretip or P51601 3mm rollerball pens Gerber SP200 Plotter PENGSUL CPS36G Plain 36" 91cm 150m 70gsm £25.18 Use PH0101 3mm fibretip or P51601 3mm rollerball pens Gerber GX3000 Plotter PENCART CPS36G Plain 36" 91cm 150m 70gsm £25.18 CP36G Plain 36" 91cm 150m 60gsm £17.39 Use PH0101 3mm fibretip or P51601 3mm rollerball pens Plotter Pens PEN2BK Fisher 2.5" 67mm £8.63 Gerber Silhouette AM200 (upright) PENBLK Fisher 3.5" 89mm £3.53 £38.13 CPS36 Plain 36" 91cm 250m 70gsm PENGBK Fisher Giant 4.25" 108mm £8.28 Gerber CE3000 and CE5000 PENGSUP Fisher Super Giant 3.7" 94mm £18.18 PENGSUL Fisher Super Giant 4.5" 114mm £17.62 CP48G Plain 48" 122cm 150m 60gsm £20.70 All Fisher pens are bold point and have black ink. Super Giant Pens last several times as long as standard pens.
Load more

Recommended publications
  • Contour Fashion BA (Hons)
    Contour Fashion BA (Hons) Equipment List 2013 BA (Hons) 1. Basic Equipment Basic sewing and pattern cutting equipment is necessary for ALL students undertaking the Contour Fashion BA (Hons) course. You are expected to provide the following basic equipment for yourselves: Pattern master Tape measure French curves Flexi curve and/or flexible 30cm ruler Propelling pencils Black fine felt tip pens Magic tape/Sellotape Eraser Machine Tweezers Pattern Notcher Tracing Wheel Notepads Pattern Awl Scissors (fabric) Scissors (paper) Embroidery scissors Stitch unpicker Cloth marking pencils Designer Fashion Tape Metre Rule Pins and hand sewing needles. You may be familiar with most of the equipment listed above. These can all be purchased from the ‘Morplan’ Student Catalogue 2012 or alternatively go to: www.morplan.com/students . You must allow 7 to 10 working days for delivery so don’t leave ordering your equipment to the last minute! You will also need to purchase a bobbin and bobbin case, for the DMU lockstitch machines, from the DMU Materials Shop on the Mezzanine floor in the Fletcher Tower. To do this you need to purchase a pink card which gives you credit from the same shop. We will give you more information about this when you arrive for Fresher’s Week and this equipment can also be purchased then. Books ‘Pattern Cutting for Lingerie, Beachwear and Leisurewear by Ann Haggar ‘Metric Pattern Cutting’ (Womenswear) by Winifred Aldridge 2. Additional Sewing Equipment It is desirable to have your own domestic sewing machine, because many of the sewing techniques taught can be practised on a domestic sewing machine.
    [Show full text]
  • Blouse, Tie & Dye and Creation of Jawellery
    SESSION:- 2013-2014 {DIPLOMA IN FASHION DESIGNING AND GARMENT TECHNOLOGY} A PROJECT REPORT ON SAREE-BLOUSE, TIE & DYE AND CREATION OF JAWELLERY Under Supervision of: Submitted by: Mr. DINESH KUMAR GAUTAM SWETA JAISWAL Principal Mr. PREM CHANDRA VERMA DEPARTMENT OF FASHION DESIGNING AND GARMENT TECHNOLOGY GOVT. GIRLS POLYTECHNIC, VARANASI PREFACE Fashion Technology viewed as one of the most demanding and professional career of word. It is in this context that Govt. Polytechnic of U.P. began a new trade Named Fashion Technology from 1996 the syllabusas if the course strikes a find balance creativity and individual expression in the one hand commercial and industrial in the other. This course has an opportunity to work with the faculty on exciting constancy project. In this project which is supplement at the paper for the final examination 2013-2014 an attempt has been made to the find a design for saree & jewelry. In this project I have endeavored in the above direction with the local availabele means and resources possibility for better achievement is always there. The great vedic Literature we may guide us in creating new design. Fashion Technology in my view is art of imagination and creation SWETA JAISWAL F.D. & G.T. IIIrd Year Govt. Girls Polytechnic Varanasi CERTIFICATE This is to certify that he dissertation entitled Saree Blouse, Tie & Dye creation of jewelry being submitted by Miss. SWETA JAISWAL Partial fulfillment of the Requirement for the award of Diploma in the Fashion Technology, Submitted to Govt. Girls Polytechnic, Varanasi is a reward of student own work cried by her under my Supervision and guidance, the matter embodied in her dissertation has not been submitted of any other Diploma.
    [Show full text]
  • Sewing Technology
    SYLLABUS OF SEMESTER SYSTEM FOR THE TRADE OF Sewing Technology Under Craftsmen Training Scheme (CTS) (One year/Two Semesters) Redesigned in 2014 By Government of India Ministry of Labour & Employment (DGE&T) J. GENERAL INFORMATION 1. Name of the Trade : Sewing Techno log y 2. NCO Code : 7433.10 3. Duration of craftsmen Training : One year (2 Semesters) th 4. Entry Qualification : Passed 10 class Under 10+2 System of examination 5. Unit Stre ng th 16 trainees 6. Space Norms 64 sq m (4 Sq.m/trainee) 7. Power Norms 05 kw 8. Instructo r's Qualification i. NTC/NAC in sewin technology(earlier trade name as "cutting & sewing") with three years Experience in relevant field Or ii. Diploma in Garment fabricating technology/ costume design with Two yea rs' Experience in relevant field Or iii. Degree in Fashion & apparel Technology With one year experience in relevant field 9. Desirable Qualification : Preference will be given to a candidate With Craft Instructors Training certificate (CITS) in Cutting & Sewing (earlier trade name as "cutting & sewing") Note: Out of two instructors required for the unit 1+1, one must have Degree/Diploma & other must have NTC/NAC qualifications 2 OBJECTI VE OF THE COURSE : To create skilled work force for Self Employment/Working in garment manufacturing Industry as - • Sewing Machine Operator • Assistant to Designer • Assistant worker in Boutique • Sample room designer • Sample Coo rdinator 3 Syllabus for the trade of "Sew ing Technology " under craftsmen training scheme First Semester {Common for Sewing Technology & Dress Designing) Semester code no. : sewing tech. - 01 Duration : Six months - - Week Trade Practical Trade Theory No.
    [Show full text]
  • SKSAMT15 Create a Pattern Via Modelling / Draping
    SKSAMT15 Create a pattern via modelling / draping Overview This standard is for those who develop patterns by draping and modelling cloth using a dress form. The job role may involve: 1 assess a design for draping /modelling suitability 2 drape or model a garment on to a dress form 3 produce a pattern SKSAMT15 Create a pattern via modelling / draping 1 SKSAMT15 Create a pattern via modelling / draping Performance criteria You must be able to: P1 select the appropriate dress form, tools and work aids P2 ensure key land marks are indicated clearly and accurately including P2.1 neck P2.2 waist P2.3 shoulder P2.4 side seams P2.5 princess seam P2.6 hip P3 create a bridge from bust point to bust point if necessary P4 use pins to mark key points such as P4.1 centre bust P4.2 top shoulder P4.3 arm hole depth P4.4 centre of armscye P4.5 centre neck P5 select fabric that is compatible with the intended design, materials and production process P6 measure, cut, and press fabric for modelling P7 mark grain lines, reference lines and pattern information onto fabric P8 pin the fabric to the dress form and position to create the desired effect including P8.1 darts P8.2 tucks P8.3 gathers P9 determine final design and mark the location of seam lines, darts, tucks etc. P10 remove the design from the dress form and lay flat P11 unpin the garment and use rulers and design curves to connect, smooth out and finalise the markings P12 add seam lines and cut off excess fabric P13 re-pin and replace the design onto the dress form P14 check and confirm the fit and
    [Show full text]
  • Table of Contents
    HOW TO START SEWING : ASSEMBIL Table of Contents About Assembil 1 Basic Fabric 20 Introduction 3 Thread 20 Different Ways to Learn 4 Needle Threader 21 How To Use This Book 4 Small Sewing Scissors or Thread Snips 22 Key Methods and Details for Professional Results 5 Fabric Shears 23 The How and Why of Sewing 5 When to Buy New Shears 23 Pins 24 Part 1 Chapter 4 Basic Hand Sewing Exercises 25 Getting Started 7 Exercise 4.01 : Hand Sewing Preparation 26 Exercise 4.02 : Basting (with Large Backstitches) 33 Exercise 4.03 : Running Stitch (with Thread Knots) 38 Chapter 1 An Introduction to Sewing Clothing 9 Chapter 5 The Basic Process 10 Seams and Seam Allowance 43 Design, Pattern, Cut and Sew 10 Joining Fabric to Make Garments 44 What Is a Seam? 44 What Is Seam Allowance (SA)? 44 Chapter 2 What Is a Seam Finish? 44 The Basic Process of Hand Sewing 11 How Much Space is Provided as Seam Allowance? 46 What Is Sewing? 12 Concentrate on Stitching Line 46 The Anatomy of a Needle 12 Seam Allowance Value 46 The Basic Process of Hand Sewing 13 What Is a Stitch? 14 What Are Stitching Lines? 14 Chapter 6 : Equipment and Materials List Elements of Neat Stitching 14 Measure, Mark and Press 47 Correct Fabric / Thread / Needle Combination 14 Tape Measure 48 Correct Support for the Fabric 14 Ruler 48 Securing the Thread in the Fabric 15 Tailor’s Chalk 48 Trimming the Excess Thread 15 Chalk Pencils 49 What Is Tension? 16 Iron and Ironing Board 49 Chapter 3 : Equipment and Materials List Chapter 7 Hand Sewing 17 Hand Sewing a Seam 51 Buying Sewing Equipment
    [Show full text]
  • For Men & Women
    MAKING Click on any image to go to the related material for Men & Women Keyhole Buttonholes Project-Garment Galleries the DVD Video Demos Printable Patterns All content © 2009 by David Page Coffin RTW & Custom Galleries Sources & Links Click Here to launch DPC’s blog for more info about using this DVD Click this symbol to return to this page Click this symbol to go to next page 1 BONUS CHAPTER Using an Eyelet Plate to Make Keyhole Buttonholes Eyelet Plates and Cutters Keyhole buttonholes are designed to An eyelet plate, shown in photos 1 and 2, covers prevent distortion when the closure is your feed dogs and provides a post on which under strain during wear. Without the ex- to position the precut hole for your keyhole, tra space provided by the keyhole shape, plus a slot that allows the needle to make a zig- 2 an ordinary buttonhole will be distorted zag stitch. The post is slotted, too, so the needle as the shank pulls against the end of the can swing inside it to form the inner edge of the hole. On pants, I’d suggest using key- eyelet (photo 3). The black plastic plate in photo holes for any and all buttonholes, wheth- 2 (sitting on top of my Bernina plate) is from my er on button flies, pocket flaps, or waist dear old Pfaff; notice that its slot is oriented in closures. I only recently got a sewing the opposite direction compared to the Bernina machine that could make keyhole but- plate (this apparently makes no difference), and tonholes, but I had already developed a that it has “toes” designed to snap into the feed- way of making keyhole buttonholes with dog holes on the machine, instead of screwing an eyelet plate.
    [Show full text]
  • Metric Pattern Cutting for Women's Wear
    Metric Pattern Cutting for Women’s Wear Also available Metric Pattern Cutting for Children’s Wear Fashion Buying Third Edition Second Edition Winifred Aldrich Helen Goworek 978 06320 5265 3 978 14051 4992 1 Metric Pattern Cutting for Menswear Pattern Cutting for Lingerie, Beachwear and Leisurewear Fourth Edition Second Edition Winifred Aldrich Ann Haggar 978 14051 3141 4 978 14051 1858 3 Fabric, Form and Flat Pattern Cutting The Apparel Industry Second Edition Second Edition Winifred Aldrich Richard M. Jones 978 14051 3620 4 978 14051 3599 3 Pattern Cutting for Women’s Tailored Jackets Fashion Source Book Winifred Aldrich Second Edition 978 06320 5467 1 Kathryn McKelvey 978 14051 2693 9 Fashion Designer’s Handbook for Adobe Illustrator Marianne Centner & Frances Vereker Illustrating Fashion 978 14051 6055 1 Second Edition Kathryn McKelvey & Janine Munslow Introduction to Clothing Manufacture 978 14051 3952 6 Second Edition Gerry Cooklin Carr & Latham’s Technology of Clothing Manufacture 978 06320 5846 4 Fourth Edition Revised by David J. Tyler Careers in Fashion and Textiles 978 14051 6198 5 Helen Goworek 978 14051 1834 7 Metric Pattern Cutting for Women’s Wear Fifth edition Winifred Aldrich © Winifred Aldrich 1976, 1979, 1982, 1985, 1989, 1990, 1994, 1997, 2004, 2008 Blackwell Publishing editorial offi ces: Blackwell Publishing Ltd, 9600 Garsington Road, Oxford OX4 2DQ, UK Tel: +44 (0)1865 776868 Blackwell Publishing Inc., 350 Main Street, Malden, MA 02148-5020, USA Tel: +1 781 388 8250 Blackwell Publishing Asia Pty Ltd, 550 Swanston Street, Carlton, Victoria 3053, Australia Tel: +61 (0)3 8359 1011 The right of the Author to be identifi ed as the Author of this Work has been asserted in accordance with the Copyright, Designs and Patents Act 1988.
    [Show full text]
  • Packaging of Competency Standards for National Qualification
    Occupational Standards for Caribbean Vocational Qualifications (CVQ) CCGPAMT0301 CVQ Level 3 – APPAREL MANUFACTURING TECHNOLOGY Unit Number Unit Title Requirement U58603 Construct and adapt patterns to customer requirements Mandatory U58703 Lay-up, mark-in and cut materials Mandatory U58803 Produce sample garments for manufacture Mandatory U58903 Handle and measure garments Mandatory U59003 Resolve quality issues and provide technical feedback Mandatory U59103 Plan apparel production schedule Mandatory U59203 Produce final apparel production schedule Mandatory U59303 Generate electronic patterns Mandatory U59403 Illustrate fashion design concept Mandatory U59503 Develop and grade garment pattern Mandatory U59603 Generate cutting lay plans Mandatory U59703 Create garment specifications and monitor product life cyle Mandatory U59803 Maintain a clean and safe work area Mandatory U59903 Provide leadership for your team Mandatory U60003 Develop and monitor operational plans Mandatory U60103 Manage professional relationship and develop yourself To obtain a Caribbean Vocational Qualification (CVQ) all Mandatory Units must be achieved. Legend to Qualification code CCGPAMT0301 CARICOM Code Occupational Number Sector Qualification Level Occupational Area Key: CC – CARICOM; GP – Garment Production; AMT - Apparel Manufacturing Technology; 3 - Level 3; 01 - Numerical sequence Approved @ 2016 Caribbean Community (CARICOM) Legend to Unit Code Example: U58603 U58603 Unit Unit Number Qualification level Key: U – Unit; 612 – Unit #: 03 – Qualification level Approved @ 2016 Caribbean Community (CARICOM) ACKNOWLEDGEMENTS The Technical and Vocational Education and Training Council would like to thank the following for their contribution to the development of this document: Creative Skill Set: www.standards.creativeskillset.org National Occupational Standards: Scottish Qualification Authority Members of the Apparel Manufacturing Technology Working Group Ms. Joy Prime Samuel Jackman Prescod Polytechnic Ms.
    [Show full text]
  • FAB-212 Flat Patternmaking II
    BERGEN COMMUNITY COLLEGE BUSINESS, ARTS & SOCIAL SCIENCES Fashion Apparel Design (FAB) Departmental Policy Syllabus FAB-212 Flat Pattern Design II Course & Section: Instructor: Credits: 3 | Lecture [2.00], Laboratory [2.00] Email: Pre/Co-requisites: FAB-112 Office Hours: Classroom: Co-requisites: FAB-213 COURSE DESCRIPTION This course builds on FAB-112, providing students with more advanced flat patternmaking techniques. Students develop sloper variations including the two-piece sleeve, jacket and pleated pants slopers. STUDENT LEARNING OUTCOMES After successfully completing all course activities, the student will be able to: 1) Develop the jacket sloper with sleeves, and the sleeveless dress sloper. 2) Develop complex sleeve variations including kimono, dolman sleevesand fitted dropped shoulder sleeve. 3) Draft pleated pants and jean. 4) Demonstrate how to incorporate stretch and knits into pattern development. MEANS OF ASSESSMENT Students will be assessed through a variety of methods, including: 1) Tests 2) Assignments 3) Journal 4) Final Project REQUIRED TEXTBOOK & RESOURCES Armstrong, Helen Joseph; Pattern Making for Fashion Design, 5 Ed, Harper Collins, New York, 2005. ISBN-13: 978-0136069348 Kopp, Rolfo & Zelin; How to Draft Basic Patterns, 3 Ed, Fairchild, 1984. ISBN-13: 978-0870054679 Gross, Kopp, Rolfo & Zelin; Designing Apparel Through the Flat Pattern, 6 Ed, Fairchild, 1991. ISBN-13: 978-0870057373 STUDENT SUPPLIES Pattern Paper Oaktag Carbon Paper Muslin in Variety of Weights as Required Hip Curve Armhole Curve L Ruler Clear Plastic Ruler Measuring Tape Tailors Chalk Paper Scissors Fabric Scissors Pattern notcher Hand Sewing Needles Straight Pins Soft and Hard Drawing Pencils Pencil Sharpener Narrow Black Twill Tape Narrow Sharpies in Red, Black and Blue SUGGESTED RESOURCES UniversityOfFashion.com WGSN.com Asapofga.com Assist-intl.com Cutplan.com Fabricad.com GGT.com Handford, Jack, Professional Pattermnaking for Designers, Plycon Press, California, 1984.
    [Show full text]
  • LMT00 Textiles, Clothing and Footwear Training Package
    LMT00 Textiles, Clothing and Footwear Training Package Volume 6 of 19 Clothing Production Version Number: 3 Review Date: June 2009 Textiles Clothing and Footwear Training Package LMT00 Version 3 © Commonwealth of Australia 2005 This work has been produced with the assistance of funding provided by the Commonwealth Government through Department of Education Science and Training (DEST). An individual may make a photocopy of all or part of the work for their personal use. A Registered Training Organisation may make photocopies of all or part of the work for the teaching purposes of that organisation, including for supply to its students provided that any consideration does not exceed the marginal cost of preparation, reproduction, assembly and delivery. Except as permitted under the Copyright Act 1968, all other rights are reserved. Requests for permission may be directed to: Branch Manager, Technology and Information Services Branch, Industry Skills Development Group, Department of Education, Science and Training, GPO Box 9880 Canberra City, ACT, 2601. Website: www.dest.gov.au This work is the result of wide consultations with Australian industry participants. It is a collaborative view and does not necessarily represent the view of DEST or any specific body. For the sake of brevity it may omit factors which could be pertinent in particular cases. While care has been taken in the preparation of this Training Package, DEST and the original developer do not warrant that any licensing or registration requirements specified here are either complete or up-to-date for your State or Territory. DEST and the original developer do not accept any liability for any damage or loss (including indirect and consequential loss) incurred by any person as a result of relying on the information contained in this Training Package.
    [Show full text]
  • Sewing Technology
    COMPETENCY BASED CURRICULUM FOR THE TRADE OF Sewing Technology SEMESTER-I & II UNDER CRAFTSMAN TRAINING SCHEME (CTS) IN SEMESTER PATTERN BY GOVERNMENT OF INDIA MINISTRY OF SKILL DEVELOPMENT& ENTREPRENEURSHIP DIRECTORATE GENERAL OF TRAINING 1 CONTENTS Sl. Topics Page No. No. 01 Introduction 02 General Information 03 Course Structure 04 Job Roles 4.1 Brief Description 4.2 NOS & QP/NCO Mapping 05 NSQF Level Compliance 06 General Training Plan, Examination & Pass regulation 07 Learning Outcomes 08 Assessable Outcomes with Assessment Criteria 09 Syllabus Content with Time Structure 9.1 9.1 Syllabus content for Professional Skill & Knowledge 9.2 9.2 Syllabus Content of Core Skills 10 Employability Skills 10.1 General Information 10.2 Distribution of Topics Between Semesters for Employability Skills 10.3 Syllabus Content of Employability Skill 11 Infrastructure 12 Assessment Standard 12.1 Assessment Guideline 12.2 Internal Assessments (Formative Assessment) 12.3 Final Assessment- All India Trade Test (Summative Assessment) 13 List of Tools & Equipment-Annexure I 14 Guidelines for Instructors and Paper Setters- Annexure II 15 List of Trade Committee Members 2 1. INTRODUCTION India is one of the youngest nations in the world. Our youth are our strength. However, a challenge facing the country is that of skilling our youth as per the demands of the industry. Recognizing the need for quickly coordinating the skill development and entrepreneurship efforts of all concerned stakeholders, the Government of India created the Ministry of Skill Development and Entrepreneurship on 9th November, 2014. To create further convergence between the Vocational Training System through Industrial Training Institutes (ITIs) and the new skill initiatives of the Government, the Training and Apprenticeship Training divisions from the Directorate General of Employment and Training (DGET) under the Ministry of Labour and Employment stand transferred to the Ministry of Skill Development and Entrepreneurship (MSDE) with effect from 16th April, 2015.
    [Show full text]
  • University of Education, Winneba College Of
    University of Education,Winneba http://ir.uew.edu.gh UNIVERSITY OF EDUCATION, WINNEBA COLLEGE OF TECHNOLOGY EDUCATION, KUMASI THE EFFECT ON BLOCK PATTERN MAKING AND MODELLING ON GARMENT MANUFACTURING: A CASE STUDY OF ANLO TECHNICAL INSTITUTE AND COMBONI VOCATIONAL TECHNICAL INSTITUTE IN THE VOLTA REGION AMETEPE WISDOM YAO DECEMBER, 2015 University of Education,Winneba http://ir.uew.edu.gh UNIVERSITY OF EDUCATION, WINNEBA COLLEGE OF TECHNOLOGY EDUCATION, KUMASI DEPARTMENT OF FASHION AND TEXTILE DESIGN EDUCATION THE EFFECT ON BLOCK PATTERN MAKING AND MODELLING ON GARMENT MANUFACTURING: A CASE STUDY OF ANLO TECHNICAL INSTITUTE AND COMBONI VOCATIONAL TECHNICAL INSTITUTE IN THE VOLTA REGION BY AMETEPE WISDOM YAO (7131210010) A Dissertation in the Department of FASHION AND TEXTILE DESIGN EDUCATION, Faculty of VOCATIONAL EDUCATION, submitted to the School of Graduate Studies, University of Education, Winneba, in partial fulfilment of the requirement for the award of the Master of Technology Education (Fashion and Textile Education) degree. DECEMBER, 2015 University of Education,Winneba http://ir.uew.edu.gh DECLARATION Student's Declaration I, Ametepe Wisdom Yao, declare that this dissertation, with the exception of quotations and references contained in published works which have all been identified and duly acknowledged, is entirely my own original work, and it has not been submitted, either in part or whole, for another degree elsewhere. SIGNATURE: ................................................................ DATE: ............................................................................. Supervisor's Declaration I hereby declare that the preparation and presentation of this dissertation was supervised in accordance with the guidelines for supervision of Dissertation as laid down by the University of Education, Winneba. NAME OF SUPERVISOR: MR. MICHAEL K. TSORGALI SIGNATURE: .......................................................................................................
    [Show full text]