DOCSLIB.ORG

Material Group Codes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Material Group Codes GRU Purchasing Material Group Codes Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals 11100000 Earth and stone 11110000 Chemicals including Bio Chemicals and Gas Materials 12000000 Chlorine Cl 12141901 Xenon gas Xe 12142001 Hydrogen compound gases 12142101 Acidic polymer breakers 12162401 Compounds and mixtures 12350000 Rubber and elastomers 13100000 Paper products 14110000 Industrial use papers 14120000 Fuels 15100000 Gaseous fuels and additives 15110000 Lubricants and oils and greases and anti corrosives 15120000 Lubricating preparations 15121500 Mining and quarrying machinery and equipment 20100000 Agricultural and forestry and landscape machinery and equipment 21100000 Heavy construction machinery and equipment 22100000 Industrial Manufacturing and Processing Machinery and Accessories 23000000 Raw materials processing machinery 23100000 Petroleum processing machinery 23110000 Sawmilling and lumber processing machinery and equipment 23230000 Metal cutting machinery and accessories 23240000 Metal forming machinery and accessories 23250000 Welding and soldering and brazing machinery and accessories and 23270000 supplies Metal treatment machinery 23280000 Industrial machine tools 23290000 Material Handling and Conditioning and Storage Machinery and their 24000000 Accessories and Supplies Material handling machinery and equipment 24100000 Containers and storage 24110000 Packaging materials 24120000 Industrial refrigeration 24130000 Packing supplies 24140000 Motor vehicles 25100000 Railway and tramway machinery and equipment 25120000 Transportation components and systems 25170000 Vehicle bodies and trailers 25180000 Power sources 26100000 Batteries and generators and kinetic power transmission 26110000 Batteries and cells and accessories 26111700 Electrical wire and cable and harness 26120000 Underground wire 26121514 Copper wire 26121517 Bare wire 26121522 Power generation 26130000 Power generation control equipment 26131800 Atomic and nuclear energy machinery and equipment 26140000 Revised 10/1/08 tw GRU Purchasing Material Group Codes Hand tools 27110000 Hydraulic machinery and equipment 27120000 Pneumatic machinery and equipment 27130000 Automotive specialty tools 27140000 Structural materials and basic shapes 30100000 Structural products 30103600 Wooden poles or telephone poles 30103608 Concrete and cement and plaster 30110000 Roads and landscape 30120000 Manhole frames with covers 30121605 Structural building products 30130000 Insulation 30140000 Exterior finishing materials 30150000 Interior finishing materials 30160000 Doors and windows and glass 30170000 Plumbing fixtures 30180000 Construction and maintenance support equipment 30190000 Prefabricated structures 30200000 Permanent structures 30220000 Portable Structures 30230000 Portable Structure Building Components 30240000 Underground mining structures and materials 30250000 Manufacturing Components and Supplies 31000000 Castings 31100000 Machined castings 31120000 Forgings 31130000 Moldings 31140000 Rope and chain and cable and wire and strap 31150000 Hardware 31160000 Bearings and bushings and wheels and gears 31170000 Gaskets and seals 31180000 Grinding and polishing and smoothing materials 31190000 Adhesives and sealants 31200000 Paints and primers and finishes 31210000 Machined raw stock 31230000 Industrial optics 31240000 Pneumatic and hydraulic and electric control systems 31250000 Housings and cabinets and casings 31260000 Machine made parts 31270000 Stampings and sheet components 31280000 Fabricated pipe assemblies 31310000 Fabricated bar stock assemblies 31320000 Fabricated structural assemblies 31330000 Fabricated sheet assemblies 31340000 Fabricated tube assemblies 31350000 Fabricated plate assemblies 31360000 Refractories 31370000 Magnets and magnetic materials 31380000 Printed circuits and integrated circuits and microassemblies 32100000 Discrete semiconductor devices 32110000 Passive discrete components 32120000 Electronic hardware and component parts and accessories 32130000 Electron tube devices and accessories 32140000 Automation control devices and components and accessories 32150000 Revised 10/1/08 tw GRU Purchasing Material Group Codes Electrical Systems and Lighting and Components and Accessories and 39000000 Supplies Lamps and lightbulbs and lamp components 39100000 Lamps and lightbulbs 39101600 Lamp Ballasts and Lamp Transformers 39101900 Lighting Fixtures and Accessories 39110000 Industrial Exterior and Landscape lighting and fixtures and accessories 39111600 Electrical equipment and components and supplies 39120000 Power conditioning equipment (Transformers) 39121000 Electrical or power regulators 39121009 Capacitor banks 39121014 Pad mount transformer 39121030 Current transformer 39121032 Potential transformer 39121033 Load centers 39121101 Switchgear systems 39121105 Electrical boxes and enclosures and fittings and accessories 39121300 Electrical lugs plugs and connectors 39121400 Switches and controls and relays and accessories 39121500 Circuit protection devices and accessories 39121600 Electrical hardware and supplies 39121700 Electrical wire management devices and accessories and supplies 39130000 Wire Markers and Wire Marking Devices 39131500 Electrical conduit 39131706 Heating and ventilation and air circulation 40100000 Water and gas distribution 40140000 Valves 40141600 Hardware and fittings 40141700 Hoses 40142000 Pipe 40142100 Pipe fittings 40142300 Industrial pumps and compressors 40150000 Industrial filtering and purification 40160000 Filters 40161500 Laboratory and scientific equipment 41100000 Measuring and observing and testing instruments 41110000 Pressure regulator 41112404 Liquid and gas flow measuring and observing instruments 41112500 Flowmeters 41112501 Water meters 41112504 Electrical measuring and testing equipment 41113600 Laboratory supplies and fixtures 41120000 Medical apparel and textiles 42130000 Emergency and field medical services products 42170000 Patient exam and monitoring products 42180000 Wound care products 42310000 Information Technology Broadcasting and Telecommunications 43000000 Communications Devices and Accessories 43190000 Components for information technology or broadcasting or 43200000 telecommunications Computer Equipment and Accessories 43210000 Data Voice or Multimedia Network Equipment or Platforms and Accessories 43220000 Software 43230000 Office machines and their supplies and accessories 44100000 Revised 10/1/08 tw GRU Purchasing Material Group Codes Office and desk accessories 44110000 Office supplies 44120000 Printing and Photographic and Audio and Visual Equipment and Supplies 45000000 Defense and Law Enforcement and Security and Safety Equipment and 46000000 Supplies Fire protection 46119000 Water and wastewater treatment supply and disposal 47100000 Janitorial equipment 47120000 Cleaning and janitorial supplies 47130000 Institutional food services equipment 48100000 Vending machines 48110000 Collectibles and awards 49100000 Floor coverings 52100000 Window treatments 52130000 Domestic appliances 52140000 Consumer electronics 52160000 Apparel and Luggage and Personal Care Products 53000000 Uniforms 53102700 Published Products 55000000 Electronic reference material 55110000 Signage and accessories 55120000 Furniture 56101500 Office furniture 56101700 Commercial and industrial furniture 56110000 Classroom and instructional and institutional furniture and fixtures 56120000 Developmental and professional teaching aids and materials and 60100000 accessories and supplies Arts and crafts equipment and accessories and supplies 60120000 Farming and Fishing and Forestry and Wildlife Contracting Services 70000000 Mining and oil and gas services 71000000 Well drilling and construction services 71120000 Building and Construction and Maintenance Services 72000000 Building construction and support and maintenance and repair services 72100000 Grounds maintenance services 72102900 General building construction 72130000 Commercial or industrial construction 72131600 Industrial Production and Manufacturing Services 73000000 Manufacture of machinery 73161500 Industrial Cleaning Services 76000000 Nonhazardous waste disposal 76121600 Hazardous waste disposal 72121900 Recycling services 76122300 Environmental Services 77000000 Environmental Auditing 77101800 Pollution investigation services 77101900 Environmental rehabilitation 77111600 Soil pollution 77121600 Transportation and Storage and Mail Services 78000000 Management and Business Professionals and Administrative Services 80000000 Management advisory services 80100000 Human resources services 80110000 Temporary personnel services 80111600 Legal services 80120000 Real estate services 80130000 Revised 10/1/08 tw GRU Purchasing Material Group Codes Marketing and distribution 80140000 Trade policy and services 80150000 Business administration services 80160000 Professional engineering services 81100000 Computer services 81110000 Software maintenance and support 81112200 Economics 81120000 Statistics 81130000 Manufacturing technologies 81140000 Earth science services 81150000 Information Technology Service Delivery 81160000 Advertising 82100000 Writing and translations 82110000 Reproduction services 82120000 Graphic design 82140000 Art design services 82141500 Professional artists and performers 82150000 Utilities 83100000 Energy conservation 83101900 Telecommunications media services 83110000 Information
Load more

Recommended publications
  • Improving Plastics Management: Trends, Policy Responses, and the Role of International Co-Operation and Trade
    Improving Plastics Management: Trends, policy responses, and the role of international co-operation and trade POLICY PERSPECTIVES OECD ENVIRONMENT POLICY PAPER NO. 12 OECD . 3 This Policy Paper comprises the Background Report prepared by the OECD for the G7 Environment, Energy and Oceans Ministers. It provides an overview of current plastics production and use, the environmental impacts that this is generating and identifies the reasons for currently low plastics recycling rates, as well as what can be done about it. Disclaimers This paper is published under the responsibility of the Secretary-General of the OECD. The opinions expressed and the arguments employed herein do not necessarily reflect the official views of OECD member countries. This document and any map included herein are without prejudice to the status of or sovereignty over any territory, to the delimitation of international frontiers and boundaries and to the name of any territory, city or area. For Israel, change is measured between 1997-99 and 2009-11. The statistical data for Israel are supplied by and under the responsibility of the relevant Israeli authorities. The use of such data by the OECD is without prejudice to the status of the Golan Heights, East Jerusalem and Israeli settlements in the West Bank under the terms of international law. Copyright You can copy, download or print OECD content for your own use, and you can include excerpts from OECD publications, databases and multimedia products in your own documents, presentations, blogs, websites and teaching materials, provided that suitable acknowledgment of OECD as source and copyright owner is given.
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • TSCA Inventory Representation for Products Containing Two Or More
    mixtures.txt TOXIC SUBSTANCES CONTROL ACT INVENTORY REPRESENTATION FOR PRODUCTS CONTAINING TWO OR MORE SUBSTANCES: FORMULATED AND STATUTORY MIXTURES I. Introduction This paper explains the conventions that are applied to listings of certain mixtures for the Chemical Substance Inventory that is maintained by the U.S. Environmental Protection Agency (EPA) under the Toxic Substances Control Act (TSCA). This paper discusses the Inventory representation of mixtures of substances that do not react together (i.e., formulated mixtures) as well as those combinations that are formed during certain manufacturing activities and are designated as mixtures by the Agency (i.e., statutory mixtures). Complex reaction products are covered in a separate paper. The Agency's goal in developing this paper is to make it easier for the users of the Inventory to interpret Inventory listings and to understand how new mixtures would be identified for Inventory inclusion. Fundamental to the Inventory as a whole is the principle that entries on the Inventory are identified as precisely as possible for the commercial chemical substance, as reported by the submitter. Substances that are chemically indistinguishable, or even identical, may be listed differently on the Inventory, depending on the degree of knowledge that the submitters possess and report about such substances, as well as how submitters intend to represent the chemical identities to the Agency and to customers. Although these chemically indistinguishable substances are named differently on the Inventory, this is not a "nomenclature" issue, but an issue of substance representation. Submitters should be aware that their choice for substance representation plays an important role in the Agency's determination of how the substance will be listed on the Inventory.
    [Show full text]
  • Chapter 2 the Solid Materials of the Earth's Surface
    CHAPTER 2 THE SOLID MATERIALS OF THE EARTH’S SURFACE 1. INTRODUCTION 1.1 To a great extent in this course, we will be dealing with processes that act on the solid materials at and near the Earth’s surface. This chapter might better be called “the ground beneath your feet”. This is the place to deal with the nature of the Earth’s surface materials, which in later sections of the chapter I will be calling regolith, sediment, and soil. 1.2 I purposely did not specify any previous knowledge of geology as a prerequisite for this course, so it is important, here in the first part of this chapter, for me to provide you with some background on Earth materials. 1.3 We will be dealing almost exclusively with the Earth’s continental surfaces. There are profound geological differences between the continents and the ocean basins, in terms of origin, age, history, and composition. Here I’ll present, very briefly, some basic things about geology. (For more depth on such matters you would need to take a course like “The Earth: What It Is, How It Works”, given in the Harvard Extension program in the fall semester of 2005– 2006 and likely to be offered again in the not-too-distant future.) 1.4 In a gross sense, the Earth is a layered body (Figure 2-1). To a first approximation, it consists of concentric shells: the core, the mantle, and the crust. Figure 2-1: Schematic cross section through the Earth. 73 The core: The core consists mostly of iron, alloyed with a small percentage of certain other chemical elements.
    [Show full text]
  • Review of Thermal Properties of Graphene and Few-Layer
    Zhong Yan, Denis L. Nika and Alexander A. Balandin (invited review, submitted in 2014) INVITED REVIEW PAPER Review of Thermal Properties of Graphene and Few-Layer Graphene: Applications in Electronics Zhong Yan1, Denis L. Nika1,2 and Alexander A. Balandin1,3 1Nano-Device Laboratory, Department of Electrical Engineering and Materials Science and Engineering Program, Bourns College of Engineering, University of California – Riverside, Riverside, California, 92521 USA 2E. Pokatilov Laboratory of Physics and Engineering of Nanomaterials, Department of Physics and Engineering, Moldova State University, Chisinau, MD-2009, Republic of Moldova 3Quantum Seed LLC, 1190 Columbia Avenue, Riverside, California 92507 USA Abstract We review thermal properties of graphene and few-layer graphene, and discuss applications of these materials in thermal management of advanced electronics. The intrinsic thermal conductivity of graphene – among the highest of known materials – is dominated by phonons near the room temperature. The examples of thermal management applications include the few-layer graphene heat spreaders integrated near the heat generating areas of the high-power density transistors. It has been demonstrated that few-layer graphene heat spreaders can lower the hot-spot temperature during device operation resulting in improved performance and reliability of the devices. Keywords: graphene, thermal conductivity, heat spreaders, thermal management 1 Zhong Yan, Denis L. Nika and Alexander A. Balandin (invited review, submitted in 2014) I. Introduction Thermal management represents a major challenge in the state-of-the-art electronics due to rapid increase of power densities [1, 2]. Efficient heat removal has become a critical issue for the performance and reliability of modern electronic, optoelectronic, photonic devices and systems.
    [Show full text]
  • Introduction to Material Science and Engineering Presentation.(Pdf)
    Introduction to Material Science and Engineering Introduction What is material science? Definition 1: A branch of science that focuses on materials; interdisciplinary field composed of physics and chemistry. Definition 2: Relationship of material properties to its composition and structure. What is a material scientist? A person who uses his/her combined knowledge of physics, chemistry and metallurgy to exploit property-structure combinations for practical use. What are materials? What do we mean when we say “materials”? 1. Metals 2. Ceramics 3. Polymers 4. Composites - aluminum - clay - polyvinyl chloride (PVC) - wood - copper - silica glass - Teflon - carbon fiber resins - steel (iron alloy) - alumina - various plastics - concrete - nickel - quartz - glue (adhesives) - titanium - Kevlar semiconductors (computer chips, etc.) = ceramics, composites nanomaterials = ceramics, metals, polymers, composites Length Scales of Material Science • Atomic – < 10-10 m • Nano – 10-9 m • Micro – 10-6 m • Macro – > 10-3 m Atomic Structure – 10-10 m • Pertains to atom electron structure and atomic arrangement • Atom length scale – Includes electron structure – atomic bonding • ionic • covalent • metallic • London dispersion forces (Van der Waals) – Atomic ordering – long range (metals), short range (glass) • 7 lattices – cubic, hexagonal among most prevalent for engineering metals and ceramics • Different packed structures include: Gives total of 14 different crystalline arrangements (Bravais Lattices). – Primitive, body-centered, face-centered Nano Structure – 10-9 m • Length scale that pertains to clusters of atoms that make up small particles or material features • Show interesting properties because increase surface area to volume ratio – More atoms on surface compared to bulk atoms – Optical, magnetic, mechanical and electrical properties change Microstructure – 10-6 • Larger features composed of either nanostructured materials or periodic arrangements of atoms known as crystals • Features are visible with high magnification in light microscope.
    [Show full text]
  • Phonons in Graphene and Van Der Waals Materials
    Phonons in Graphene and van der Waals Materials Alexander A. Balandin Department of Electrical Engineering and Materials Science and Engineering Program University of California – Riverside MRS Medal Talk Fall 2013 Nano-Device Laboratory (NDL) Department of Electrical Engineering University of California – Riverside Profile: experimental and theoretical research in advanced materials and nano-devices Nanoscale Characterization PI: Alexander A. Balandin Phononics Research Thermal and Electrical & Applications Characterization Electronic Devices and Circuits Theory and Modeling Direct Energy Conversion Device Design and Raman, Fluorescence Characterization and PL Spectroscopy Optoelectronics Bio- Nanotech Alexander A. Balandin, University of California - Riverside Outline Introduction and Basic Definitions Phonons Thermal conductivity Thermal Conductivity of Graphene Raman spectroscopy Optothermal technique Theoretical interpretation Graphene Thermal Applications TIMs and PCMs Heat spreaders Phonons in van der Waals Materials Raman metrology Charge-density waves Outlook: Phononics and Phonon Engineering 3 Alexander A. Balandin, University of California - Riverside Practical Motivations: Why Material Scientists Should Study Thermal Properties? Data is after R. Mahajan et al., Proceed. IEEE (2006) No BIG fan solutions! The switch to multi-core designs alleviates the growth in the thermal design power (TDP) IEEE Spectrum illustration of the increase but does not solve the thermal issues in the feature hot-spot problem article Chill Out: New Materials and Designs Can Keep Chips Non-uniform power densities Cool by A.A. Balandin. leading to hot-spots (>500 W/cm2) Alexander A. Balandin, University of California - Riverside Basics of Phonons The quantum of the energy of a lattice vibration is called a phonon in analogy with the photon of the electromagnetic wave.
    [Show full text]
  • Glossary of Materials Engineering Terminology
    Glossary of Materials Engineering Terminology Adapted from: Callister, W. D.; Rethwisch, D. G. Materials Science and Engineering: An Introduction, 8th ed.; John Wiley & Sons, Inc.: Hoboken, NJ, 2010. McCrum, N. G.; Buckley, C. P.; Bucknall, C. B. Principles of Polymer Engineering, 2nd ed.; Oxford University Press: New York, NY, 1997. Brittle fracture: fracture that occurs by rapid crack formation and propagation through the material, without any appreciable deformation prior to failure. Crazing: a common response of plastics to an applied load, typically involving the formation of an opaque banded region within transparent plastic; at the microscale, the craze region is a collection of nanoscale, stress-induced voids and load-bearing fibrils within the material’s structure; craze regions commonly occur at or near a propagating crack in the material. Ductile fracture: a mode of material failure that is accompanied by extensive permanent deformation of the material. Ductility: a measure of a material’s ability to undergo appreciable permanent deformation before fracture; ductile materials (including many metals and plastics) typically display a greater amount of strain or total elongation before fracture compared to non-ductile materials (such as most ceramics). Elastic modulus: a measure of a material’s stiffness; quantified as a ratio of stress to strain prior to the yield point and reported in units of Pascals (Pa); for a material deformed in tension, this is referred to as a Young’s modulus. Engineering strain: the change in gauge length of a specimen in the direction of the applied load divided by its original gauge length; strain is typically unit-less and frequently reported as a percentage.
    [Show full text]
  • Composite Materials Prof
    COMPOSITE MATERIALS PROF. R. VELMURUGAN Composite Materials Module I - Introduction Lectures 1 to 2 Introduction Composite materials have changed the world of materials revealing materials which are different from common heterogeneous materials. A composite material is a structural material that consists of two or more combined constituents which are combined at macroscopic level and are not soluble in each other. It should be understood that the aforesaid composite material is not the by-product of any chemical reaction between two or more of its constituents. One of its constituents is called the reinforcing phase and the other one, in which the reinforcing phase material is embedded, is called the matrix. The reinforcing phase material may be in the form of fibers, particles, or flakes (e.g. Glass fibers). The matrix phase materials are generally continuous (e.g. Epoxy resin). The matrix phase is light but weak. The reinforcing phase is strong and hard and may not be light in weight. For example, in concrete reinforced with steel the matrix phase is concrete and the reinforcing phase is steel. In graphite/epoxy composites the graphite fibers are the reinforcing phase and the epoxy resin is the matrix phase. A material shall be considered as a composite material if it satisfies the following conditions: 1. It is manufactured i.e., excluding naturally available composites. 2. It consists of two or more physically and/or chemically distinct, suitably arranged or distributed phases with an interface separating them. 3. It has characteristics that are not the replica of any of the components taken individually.
    [Show full text]
  • Multi-Material Ceramic-Based Components – Additive Manufacturing of Black- And-White Zirconia Components by Thermoplastic 3D-Printing (Ceram - T3DP)
    Journal of Visualized Experiments www.jove.com Video Article Multi-material Ceramic-Based Components – Additive Manufacturing of Black- and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP) Steven Weingarten1, Uwe Scheithauer1, Robert Johne2, Johannes Abel1, Eric Schwarzer1, Tassilo Moritz1, Alexander Michaelis1 1 Fraunhofer Institute for Ceramic Technologies and Systems IKTS 2 Fraunhofer Singapore Correspondence to: Steven Weingarten at [email protected] URL: https://www.jove.com/video/57538 DOI: doi:10.3791/57538 Keywords: Engineering, Issue 143, Additive Manufacturing, ceramics, multi-material, multi-color, zirconia, Thermoplastic 3D-Printing (CerAM - T3DP), Functionally Graded Materials (FGM) Date Published: 1/7/2019 Citation: Weingarten, S., Scheithauer, U., Johne, R., Abel, J., Schwarzer, E., Moritz, T., Michaelis, A. Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP). J. Vis. Exp. (143), e57538, doi:10.3791/57538 (2019). Abstract To combine the benefits of Additive Manufacturing (AM) with the benefits of Functionally Graded Materials (FGM) to ceramic-based 4D components (three dimensions for the geometry and one degree of freedom concerning the material properties at each position) the Thermoplastic 3D-Printing (CerAM - T3DP) was developed. It is a direct AM technology which allows the AM of multi-material components. To demonstrate the advantages of this technology black-and-white zirconia components were additively manufactured and co-sintered defect-free. Two different pairs of black and white zirconia powders were used to prepare different thermoplastic suspensions. Appropriate dispensing parameters were investigated to manufacture single-material test components and adjusted for the additive manufacturing of multi-color zirconia components.
    [Show full text]
  • 2008 NSF-Sponsored Report: the Future of Materials Science And
    THE FUTURE OF MATERIALS SCIENCE AND MATERIALS ENGINEERING EDUCATION A report from the Workshop on Materials Science and Materials Engineering Education sponsored by the National Science Foundation September 18-19, 2008 in Arlington, VA TABLE OF CONTENTS Summary . 5. Summary of the Recommendations . 9. Public Education and Outreach Recommendations . 9. Kindergarten through 12th Grade (K-12) Education Recommendations . 9. Undergraduate Education Recommendations . 10. Graduate Education Recommendations . 10. 1. Public Education and Outreach . 13. 1 .1 Introduction . 13. 1 .2 What Does the Public Know? . 13. 1 .3 What Should the Public Know? . 14. 1 .4 How Does the Public Learn About Materials Science and Materials Engineering? . 17. 1 5. How Can the Materials Community Promote Learning Using Informal Science Education? . 20. 1 .6 What is the Impact of Outreach Activities on the Career Development of Faculty? . 21. 1 .7 Recommendations . 22. 2. Kindergarten Through 12th Grade (K-12) Education . 23. 2 .1 Introduction . 23. 2 .2 Materials Education Standards and Curricula for K-12 Students . 24. 2 .3 Professional Development of K-12 Teachers . 27. 2 .4 Career Awareness for K-12 Students . 28. 2 .5 Recommendations . 29. 3. Undergraduate Education . 31. 3 .1 Introduction . 31. 3 .2 Curriculum Development . 32. 3 .3 Recruiting and Retaining Students in MSME . 34. 3 .4 Recommendations . 35. 4. Graduate Education . 37. 4 .1 Introduction . 37. 4 .2 Course Curriculum . 39. 4 .3 Interdisciplinary Training . 41. 4 .4 Career Preparation . 43. 4 .5 Recommendations . 44. 5. Cross-Cutting Theme: Use of Information Technology in MSME Education and Research . 45. 6. Workshop Program . 47. 7.
    [Show full text]
  • Abbreviations for Various Plastic Materials Typical Molding Problems and Possible Causes
    ’TECHNICAL DATA» ’TECHNICAL DATA» ABBREVIATIONS FOR VARIOUS PLASTIC MATERIALS TYPICAL MOLDING PROBLEMS AND POSSIBLE CAUSES I List of Abbreviations for Plastic Materials In alphabetical order Cause Condition Molding machine Mold Material Abbreviations Resins (1 ) Low material temperature ( 1 ) Small gate or runner (1) Low fluidity ABS Acrylonitrile–butadiene–styrene (2 ) Low injection pressure ( 2 ) Inadequate gate position (2) Low lubricity AS Styrene–acrylonitrile GSAN in ISO (3) Material feed shortage ( 3 ) Inadequate position of or no air vent CA Cellulose acetate Filling miss ( ) ( ) CAB Cellulose acetate butyrate 4 Too small nozzle hole diameter 4 Low mold temperature CF Cresol–formaldehyde (5 ) Cylinder nozzle clogging ( 5 ) Cold slag clogging in runner or gate CMC Carboxymethyl celluloss CN Cellulose nitrate CS Casein (1 ) Weak clamping force (1) Flaw or a foreign body on parting plane (1) Excessive fluidity EC Ethyl cellulose (2) High injection pressure (2) Wide project area to the machine Fin EP Epoxide; epoxy (3) Material overfeed (3) High mold temperature EVA Ethylene vinylalcohol (4) High material temperature LCP Liquid Crystal Polymer MF Melamine–formaldehyde (1) Low injection pressure (1) High mold temperature (1) Material, too supple PA Polyamide ( ) Slow injection ( ) ( ) G 2 2 Products thickness uneven 2 High contraction coefficient PBTP Poly butyrene terephthalate Also PBT Shrinkage (3) High material temperature (3) Small gate PC Polycarbonate cavity PCTFE Polychlorotriflu oroethylene (4) Short pressure retaining (4)
    [Show full text]