Cup-Wheel Product Range for CMG 1700 Concrete Grinder

Total Page：16

File Type：pdf, Size：1020Kb

Cup-wheel product range for CMG 1700 concrete grinder Top professional quality for an optimum abrasion rate and a long durability; different segment qualities for different material hardnesses; smooth running and durable. Select the suitable grinding cup-wheel for the surface to be machined BST 125 — CYCLONE Premium cup-wheel with 12 segments, long durability for a universal range of applications; optimal dust removal due to offset segment arrangement, consistent diamond coating for constant grinding performance, highly abrasive; coarser grinding pattern;ideal for grinding down hard concrete, ground preparation on hard screed, removing tile adhesive and formwork seams, lime sandstone, sanding lime-cement plaster, and for levelling natural stone Hard concrete Flexible adhesive Screed Type Art. no. Ø Height Bore No. seg- Height mm mm mm ments Segm. mm BST 125 19289 125 22 22.23 12 7 GST 125 – GRINDER Precision diamond cup-wheel with hard segments, premium quality for a perfect grinding pattern on abrasive materials; suitable for sanding and levelling fresh concrete and removing layers of sludge, tile adhesive, fresh screed, cement plaster, gypsum plaster, and also for fine sanding of marble and soft natural stone Fresh concrete Tile adhesive Soft natural stone Type Art. no. Ø Height Bore No. seg- Height mm mm mm ments Segm. mm GST 125 19293 125 22 22.23 8 7 Cup-wheel product range UST 125 – UNIVERSAL Standard diamond grinding cup for abrasive material with a very good abrasion to enable rapid working progress; out- standing price/performance ratio; ideal for a wide range of applications such as levelling fresh concrete, screed, mineral adhesives, cement plaster, cement-based fillers and abrasive natural stone (e.g. soft sandstone) Fresh concrete Mineral adhesives Natural stone Type Art. no. Ø Height Bore No. seg- Height mm mm mm ments Segm. mm UST 125 19294 125 22 22.23 8 7 PST 125 – STRAP-IT PKD cup-wheel with polycrystalline diamonds, prevents clogging of the segments and ensures a high removal rate for thermoplastic materials; suitable for roughing and grinding down thermoplastic coatings (on soft and hard surfaces), adhesives, sealants, and for removing latex and oil paints, bitumen, PU/polyurethane, epoxy resin coatings; do not use for grinding of reinforced concrete Epoxy coatings Bitumen Old coatings Type Art. no. Ø Height Bore No. seg- Height mm mm mm ments Segm. mm PST 125 19296 125 22 22.23 6 2.5 Lamellar ring Every original Collomix cup-wheel is supplied with a spare lamellar ring for the CMG 1700 grinder. 0717 ǀ 45165-11 Collomix GmbH • Daimlerstr. 9 • 85080 Gaimersheim • Tel: 08458 3298-0 • [email protected] • www.collomix.de.

Copy Link

Recommended publications

Experimental Investigation on Nano Concrete with Nano Silica and M-Sand
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 03 | Mar 2019 www.irjet.net p-ISSN: 2395-0072 EXPERIMENTAL INVESTIGATION ON NANO CONCRETE WITH NANO SILICA AND M-SAND Mohan Raj.B1, Sugila Devi.G2 1PG Student, Nadar Saraswathi College of Engineering and Technology, Theni, Tamilnadu, India. 2Assistant Professor, Nadar Saraswathi College of Engineering and Technology, Theni, Tamilnadu, India. ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - The influence of Nano-Silica on various material is Nano Silica (NS). The advancement made by the properties of concrete is obtained by replacing the cement study of concrete at Nano scale has proved the Nano silica is with various percentages of Nano-Silica. Nano-Silica is used as much better than silica fume used in conventional concrete. a partial replacement for cement in the range of 3%, 3.5%, Now, the researchers are capitalizing on nanotechnology to and 10% for M20 mix. Specimens are casted using Nano-Silica innovate a new generation of concrete materials that concrete. Laboratory tests conducted to determine the overcome the above drawbacks and trying to achieve the compressive strength, split tensile and flexural strength of sustainable concrete structures. Evolution of materials is Nano-Silica concrete at the age of 7, 14 and 28 days. Results need of the day for improved or better performance for indicate that the concrete, by using Nano-Silica powder, was special engineering applications and modifying the bulk able to increase its compressive strength. However, the density state of materials in terms of composition or microstructure is reduce compared to standard mix of concrete.
[Show full text]
Sims-Lohman Fine Kitchens and Granite Meeting the Challenge of Transformation and Growth Head-On with Twelve Locations UR Narrative Begins in by Peter J
www.slipperyrockgazette.net VOLUME 20, ISSUE 236 THE BEACON OF THE STONE INDUSTRY FEBRUARY 2014 Sims-Lohman Fine Kitchens and Granite Meeting the Challenge of Transformation and Growth Head-On with Twelve Locations UR narrative begins in by Peter J. Marcucci the late 1990s, when the Steinman family acquired Photos Courtesy Sims-Lohman and by Larry Hood Moellering Industries, a quality cabinet supplier in Cincinnati, Ohio. Resolute and commit- ted, they did so knowing that the road to success is paved with a myriad of twists, turns and crossroads and is sometimes strewn with the remnants of previous entrepreneurs. Choosing to fast track the journey, Steve Steinman, along with John Beiersdorfer, President of Sims-Lohman, and a cohesive working group of talent, switched on their internal GPS’s, buckled their seat belts, and accelerated the ride by adding acquisition after acquisition to their portfolio of premium companies in the greater Cincinnati, Ohio region to create Sims-Lohman Fine Kitchens and Granite. Spanning four states and employing over 300 people, Sims-Lohman has since dotted that roadmap with eight locations within Ohio, two A trough sink and built-in wine rack are high- in Indiana, one in Kentucky, and their latest lights of this 3cm Magma granite island and acquisition in Pittsburgh, Pennsylvania. All breakfast area. The contemporary cabinets twelve locations are sales showrooms, with company, we adopted that name. Following effective. A lot of companies in the countertop unmistakably define Sims-Lohman as the area’s four being fabrication facilities, strategically this acquisition, we acquired two granite fab- world either made that switch, or they didn’t gold standard and a shop of distinction.
[Show full text]
Armorhab: Design Reference Architecture (DRA) for Human
Copyright © 2016 by Dark Sea Industries LLC and the University of New Mexico. Published by The Mars Society with permission ArmorHab: Design Reference Architecture (DRA) for human habitation in deep space Peter Vorobieff Professor and Assistant Chair, Assistant Chair of Facilities, Department of Mechanical Engineering University of New Mexico, Albuquerque, NM, 87131 Phone: (505) 277-8347 email: [email protected] Affiliation: University of New Mexico Craig Davidson Administrator 4808 Downey NE Albuquerque, NM 87109 Phone: 505-720-2321 email: [email protected] Affiliation: Dark Sea Industries LLC Dr. Mahmoud Reda Taha, Peng Professor and Chair, Department of Civil Engineering University of New Mexico, Albuquerque, NM 87131-0001 Office: (505) 277-1258, Cell: (505) 385-8930, Fax (505) 277-1988 http://civil.unm.edu/faculty-staff/faculty-profiles/mahmoud-taha.html www.unm.edu/~mrtaha/index.htm Affiliation: University of New Mexico Christos Christodoulou Associate Dean for Research Distinguished Professor, Electrical & Computer Engineering University of New Mexico Albuquerque, NM 87131 Tel: (505) 277-6580 www.ece.unm.edu/faculty/cgc www.cosmiac.org Affiliation: University of New Mexico Anil K. Prinja Professor and Chair Department of Nuclear Engineering University of New Mexico Albuquerque, NM 87131-1070 -1- Copyright © 2016 by Dark Sea Industries LLC and the University of New Mexico. Published by The Mars Society with permission Phone: (505)-277-4600, Fax: (505)-277-5433 [email protected] Affiliation: University of New Mexico Svetlana V. Poroseva Assistant Professor Department of Mechanical Engineering University of New Mexico, Albuquerque, NM, 87131 Phone: 1(505) 277-1493, Fax: 1(505) 277-1571 email: poroseva at unm.edu Affiliation: University of New Mexico Mehran Tehrani Assistant Professor Department of Mechanical Engineering University of New Mexico, Albuquerque, NM, 87131 Phone: 1(505) 277-1493, Fax: 1(505) 277-1571 email: [email protected] Affiliation: University of New Mexico David T.
[Show full text]
STATE of HAWAII DEPARTMENT of TRANSPORTATION HIGHW a YS DIVISION HONOLULU, HA Wail
STATE OF HAWAII , DEPARTMENT OF TRANSPORTATION HIGHW AYS DIVISION . , .' HONOLULU, HA WAIl SPECIAL PROVISIONSJ PROPOSALJ CONTRACTJ BOND AND PLANS FOR ALA MOANA BOULEVARD J SEALING OF WELL ., AT ALA MOANA MINI-PARK PROJECT NO. 92A-03-81 DISTRICT OF HONOLULU ISLAND OF OAHU 1981 Ct:J r~- .- .-. -- , -- <: - r-- , c. i ~ j ""1-" co C ,~ p:-: . ""'I-- I ):.--' -- C -..; " ''''\, -:, fTII < 2:::0 fTl ~PO c......:: 0 -t « P •. STATE OF HAWAII DEPARTMENT OF TRANSPORTATION HIGHWAYS DIVISION HONOLULU, HAWAII SPECIAL PROVISIONS, PROPOSAL, CONTRACT, BOND AND PLANS FOR ALA MOANA BOULEVARD, SEALING OF WELL AT ALA MOANA MINI-PARK PROJECT NO. 92A-03-8l DISTRICT OF HONOLULU ISLAND OF OAHU 1981 Improvements consist of sealing existing Well No. 1851-22 with sand cement or neat cement grout, and is located at Ala Moana Mini-Park, near the intersection of Ala Moana Boulevard and Richards Street. The existing well is 8 inches in diameter with a total depth of about 1152 feet and cased to a depth of 986 feet. 92A-03-81 4/16/81 ) I 1.ff IJ II c \ I I \ -I I \ I I ,! ! ! &: IIII~~~'-",'_,I_J!1,_1111 _______ TABLE OF CONTENTS Page No. Notice to Bidders Instructions to Bidders 1 - 4 Special Provisions DIVISION 100 - GENERAL PROVISIONS Sectl.on Title Page No. 101 Definitions and Terms 101-1 102 Bidding Requirements and Conditions 102-1 103 Award and Execution of Contract Award of Contract . 0 0 • • • • 0 103.03-1 Requirement of Contract Bond 103.06-1 104 Scope of Work . 104-1 105 Control of Work Authority of the Engineer • • 105.01-1 Construction Stakes, Lines and Grades 0 • 0 0 0 0 • • 105.07-1a Load Restrictions 105.13-1 Acceptance • .
[Show full text]
Staining at a Theme Restaurant Pg. 90 Finishing Brooms Pg. 63 Seaweed
Staining at a concrete Theme Restaurant pg. 90 Finishing Brooms pg. 63 THE JOURNAL ® OF DECORATIVE CONCRETE DECOR Seaweed Stamps pg. 94 concretedecor.net Vol. 11 No. 1 January 2011 A New World ETE D CR ECO N R CO T E H C E R D 10 TH U 001 E 2011 2 O C O ANNIVERSARY S R Y A R TI ST VE DU CONCRETE IN publisher’s concrete THE JOURNAL ® OF DECORATIVE LETTER CONCRETE DECOR January 2011 Dear Readers, Volume 11 · Issue No. 1 If this is your first issue of Concrete Decor, I want to Publisher: Bent O. Mikkelsen personally welcome you to our pages and to the industry of Co-Publisher: Ernst H. Mikkelsen decorative concrete. If you’re one of our many subscribers, you Editor: John Strieder have already noticed a significant change in both the look and Assistant Editor: Emily Dixon feel of Concrete Decor. Creative Director: Bill Simpson Why this change? It’s Concrete Decor magazine’s 10th Web Design: Brian Hollett Writers: Dave Berry anniversary. It’s our ambition to celebrate this successful Doug Carlton benchmark for our industry while at the same time setting the Natasha Chilingerian industry’s sights on another decade of progress. Scott Cohen Jeffrey Girard Truth be told, decorative concrete has been used in places like Disney World and Amy Johnson other public venues for quite some time. However, it’s only been in the last 10 years Howard Jancy that the industry has become widely recognized as a trusted alternative to other Chris Mayo Jim Miller building solutions.
[Show full text]
Concrete Cure and Finishing System 033509 - 1
SECTION 033509 – CONCRETE CURE AND PROFILE FINISHING SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Concrete mix shrinKage compensating aDmix [integral color admix] anD fiber reinforcement for floor slabs. 2. Concrete floor slab finishing incluDing floating, troweling, curing, anD sealing. 3. Concrete floor slab profiling incluDing [honing] [polishing] [dyeing] anD sealing. 4. Protecting finished concrete floor slab until Substantial Completion. 1.2 RELATED REQUIREMENTS A. Concrete for polisheD concrete, incluDing formworK, reinforcement, concrete materials, mixture design, placement procedures, initial finishing and curing. Additional requirements are specified in Section 033000 "Cast-in-Place Concrete." 1. CoorDinate with sections: a. Section 032400 - Fibrous Reinforcing. b. Section 033000 - Cast-in-Place Concrete. c. Section 033119 - Shrinkage-Compensating Structural Concrete. d. Section 033500 - Concrete Finishing. e. Section 033900 - Concrete Curing. f. Section 079200 - Joint Sealants. 2. CoorDinate with finishing manufacturer for system "products" for sections above. 1.3 REFERENCES A. ASTM International (ASTM): 1. ASTM C94/C94M: Standard Specification for Ready-MixeD Concrete 2. ASTM C156: Standard Test Method for Water Loss (from a Mortar Specimen) Through LiquiD Membrane–Forming Curing Compounds for Concrete. 3. ASTM C779/C779M: StanDard Test MethoD for Abrasion Resistance of Horizontal Concrete Surfaces. 4. ASTM C805/C805M: StanDard Test MethoD for RebounD Number of HardeneD Concrete. 5. ASTM C878/C878M: Standard Test Method for Restrained Expansion of Shrinkage- Compensating Concrete. CONCRETE CURE AND FINISHING SYSTEM 033509 - 1 6. ASTM C944/C944M: Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating–Cutter MethoD. 7. ASTM C979/C979M: Standard Specification for Pigments for Integrally Colored Concrete.
[Show full text]
Geopolymers from Lunar and Martian Soil Simulants Alexiadis, Alessio; Alberini, Federico; Meyer, Marit E
University of Birmingham Geopolymers from lunar and Martian soil simulants Alexiadis, Alessio; Alberini, Federico; Meyer, Marit E. DOI: 10.1016/j.asr.2016.10.003 License: Creative Commons: Attribution-NonCommercial-NoDerivs (CC BY-NC-ND) Document Version Peer reviewed version Citation for published version (Harvard): Alexiadis, A, Alberini, F & Meyer, ME 2017, 'Geopolymers from lunar and Martian soil simulants', Advances in Space Research, vol. 59, no. 1, pp. 490-495. https://doi.org/10.1016/j.asr.2016.10.003 Link to publication on Research at Birmingham portal General rights Unless a licence is specified above, all rights (including copyright and moral rights) in this document are retained by the authors and/or the copyright holders. The express permission of the copyright holder must be obtained for any use of this material other than for purposes permitted by law. •Users may freely distribute the URL that is used to identify this publication. •Users may download and/or print one copy of the publication from the University of Birmingham research portal for the purpose of private study or non-commercial research. •User may use extracts from the document in line with the concept of ‘fair dealing’ under the Copyright, Designs and Patents Act 1988 (?) •Users may not further distribute the material nor use it for the purposes of commercial gain. Where a licence is displayed above, please note the terms and conditions of the licence govern your use of this document. When citing, please reference the published version. Take down policy While the University of Birmingham exercises care and attention in making items available there are rare occasions when an item has been uploaded in error or has been deemed to be commercially or otherwise sensitive.
[Show full text]
Grinders Quick Tool Reference Guide
GRINDERS QUICK TOOL REFERENCE GUIDE SMALL ANGLE GRINDERS Item # 1375A GWS8-45 GWS9-45 GWS10-45 GWS10-45P(D) GWS13-50 GWS13-50P(D) GWS13-50VS Wheel Size 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 5" 5" 5" Multi-Grip Multi-Grip Paddle Paddle Switch Type Lock-on Lock-on Lock-on Lock-on Lock-on Lock-on (GWS10-45PD — (GWS13-50PD — no lock-on) no lock-on) GRINDERS Amperage 6.0 7.5 8.5 10.0 10.0 13.0 13.0 13.0 No Load RPMs 11,000 11,000 11,000 11,500 11,500 11,500 11,500 2,800–11,500 Spindle Thread 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 Epoxy-Coated Yes Yes Yes Yes Yes Yes Yes Yes Field Windings Sealed Switch Yes Yes Yes Yes Yes Yes Yes Yes Service Minder™ Yes Yes Yes Yes Yes Yes Yes Yes Vibration Control™ No No No Yes Yes Yes Yes Yes Electronic Clutch No No No No No Yes Yes Yes Restart Protection No No No No No Yes Yes Yes Guard Screw type Screw type Screw type Toolless Toolless Toolless Toolless Toolless Length 10-1/2" 11" 10-3/4" 11-1/2" 12" 12-1/2" 12" 12-1/4" Weight 3.75 lbs. 4.2 lbs. 3.9 lbs. 4.6 lbs. 4.6 lbs. 5.3 lbs. 5.4 lbs. 5.3 lbs. SMALL ANGLE GRINDERS, TUCKPOINTING, CONCRETE SURFACING Item # GWS13-50VSP 1821/1821D GWS13-60 GWS13-60PD CSG15 1775E AG50-10 AG50-10TG 5" Concrete 5" Tuckpoint 5" Tuckpoint Wheel Size 5" 5" 6" 6" 5" Surfacing Grinder Grinder Paddle Multi-Grip Multi-Grip (1821D — Switch Type Lock-on Paddle Switch Lock-on Lock-on Lock-on Lock-on Paddle no lock-on No Lock-on switch) Amperage 13.0 9.5 13.0 13.0 12.5 8.5 10.0 10.0 No Load RPMs 2,800–11,500 11,000 9,300 9,300 9,300 11,000 11,500 11,500 Spindle Thread 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 5/8"–11 Epoxy-Coated Yes Yes Yes Yes Yes Yes Yes Yes Field Windings Sealed Switch Yes Yes Yes Yes Yes Yes Yes Yes Service Minder™ Yes Yes Yes Yes Yes Yes Yes Yes Vibration Control™ Yes Yes Yes Yes No No Yes Yes Electronic Clutch Yes No Yes Yes No No No No Restart Protection Yes No Yes Yes Yes No No No Surfacing Tuckpointing Guard Toolless Toolless Toolless Toolless Toolless Toolless only only Length 12-1/4" 13-3/4" 12-1/4" 12-1/2" 13-3/4" 11-3/4" 12" 12" Weight 5.4 lbs.
[Show full text]
Concrete Grinder Rely on Collomix When Treating Surfaces
Grinding in the champions’ class Surface technology by Collomix Concrete grinder Rely on Collomix when treating surfaces. Outstanding performance and perfect grinding results impress the professional. Dust is created wherever grinding takes place. This not only endangers your health, it also makes your work considerably more difficult. The 35 mm socket on the hood of the CMG 1700 ensures uncomplicated connection of a dust ex- tractor. The closed rubber lamellar ring also pre- CMG vents dust discharge. 1700 A smart segment opening has been fitted in the The compact grinder hood of the CMG 1700 to allow you to grind for cup wheels with Ø 125 mm close to edges and borders. In this regard, the soft start takes care of your safety in the same Powerful and with outstanding performance: way as overload protection. The Collomix CMG 1700 sets standards in qual- Thanks to the adjustable grip, you can always ity, performance and safety. With its powerful work comfortably and without almost any fa- 1700 watts and a comprehensive range of grind- tigue setting in. ing wheels, it’s a real all-rounder for small to me- dium-sized surfaces. Practical segment opening for precise working on edges Closed lamellar ring for low- dust working* Technical data Output: 1700 W / 230 V Speed: 9600 min -1 Grinding wheel Ø: 125 mm Weight: 3.0 kg Suction nozzle: Ø 35 mm Art. no.: 19200 Robust case for safe and prac- Visual performance monitoring tical stowage as overload protection Technical data Output: 2600 Watt / 230 V Speed: 6600 min -1 Grinding wheel Ø: 180 mm Weight: 6.8 kg Suction nozzle: Ø 35 mm Art.
[Show full text]
Construction, Surveying and Civil Engineering
A Dictionary of Construction, Surveying and Civil Engineering CHRISTOPHER GORSE, DAVID JOHNSTON, AND MARTIN PRITCHARD 1 3 Great Clarendon Street, Oxford OX2 6DP, United Kingdom Oxford University Press is a department of the University of Oxford. It furthers the University’s objective of excellence in research, scholarship, and education by publishing worldwide. Oxford is a registered trade mark of Oxford University Press in the UK and in certain other countries # Oxford University Press 2012 The moral rights of the author have been asserted First Edition published in 2012 1098765432 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the prior permission in writing of Oxford University Press, or as expressly permitted by law, by licence or under terms agreed with the appropriate reprographics rights organization. Enquiries concerning reproduction outside the scope of the above should be sent to the Rights Department, Oxford University Press, at the address above You must not circulate this work in any other form and you must impose this same condition on any acquirer British Library Cataloguing in Publication Data Data available Library of Congress Cataloging in Publication Data Data available ISBN 978–0–19–953446–3 Printed in Great Britain on acid-free paper by Clays Ltd, St Ives plc Preface This Dictionary aims to provide a comprehensive and up-to-date reference of construction, surveying, and civil engineering terms within one publication. The entries address the needs of those studying on built environment courses or engaged in professional practice as well as providing much useful information for those with a general interest in architecture or construction.
[Show full text]
Best of Accessories January – March 2014
Best of Accessories January – March 2014 Bosch Customer Service 01895 838791 This number connects you to the Bosch Customer Service Team. It is there to answer your questions about technical matters and for customer service – quick and user-friendly. Outside office hours an answer phone will take your message. Promotions Page 16 – 21 Imprint Publisher Y. XXXXXXXX Editor Y. XXXXXXXX Content Address Robert Bosch GmbH to be adapted XXXXXX XXXXXXXX locally YYYY YYYYYYYYYYYYY www.bosch.com Edition 1 The innovation from Bosch: The all new Best for Universal diamond blade with Dealer contact details up to 30 % more cutting speed and outstand- ing lifetime even under roughest conditions. 1 619 A00 ??? – en – PT-AC/MKB-EU – Printed at (Printer address incl. state). Subject to technical alterations. Liability for printing errors is not accepted. Date: ??.??.2013 2 | Overview Best of Accessories | 1/2014 1/2014 | Best of Accessories Best for Universal | Diamond cutting | 3 Table of contents For extra high speed in cutting construction materials The construction industry is always un- der pressure to deliver the building on schedule, which is usually tight. Increased productivity to maximize the performance and consequently the profitability is one of the main challenges for the construc- tion industry nowadays. Cutting con- struction materials is frequently difficult and takes a lot of time, especially when cutting hard materials such as concrete. The new Best for Universal dia- mond blade was specially designed to provide up to 30 % more cutting speed thanks to new segment design and innovative 3D diamond array technology. Diamond cutting 03 Promotions 16 Leader in quality and innovation – thanks to own in-house research and development ▶ Best for Universal 03 ▶ Diamond and Safety Accessories 16 ▶ Best for Ceramic and Stone 08 ▶ 32-piece screwdriver bit set 19 Innovative and high-performance products ensure sales success ▶ Best for Ceramic Extraclean Turbo 09 ▶ Flap Disc X431 20 for specialist retailers.
[Show full text]
Wayne I-5935 C204024
STATE OF NORTH CAROLINA C204024 DEPARTMENT OF TRANSPORTATION RALEIGH, N.C. CONTRACT AND CONTRACT BONDS FOR CONTRACT NO. _______C204024 WBS 45877.3.1 NHPIM-0795(6) T.I.P NO. I-5935 COUNTY OF WAYNE THIS IS THE ROADWAY CONTRACT ROUTE NUMBERI 795 LENGTH13.500 MILES LOCATION I-795 FROM US-70 TO THE WILSON COUNTY LINE. CONTRACTOR S T WOOTEN CORPORATION ADDRESS P.O. BOX 2408 WILSON, NC 278942408 BIDS OPENED JULY 18, 2017 8/9/2017 CONTRACT EXECUTION STATE OF NORTH CAROLINA DEPARTMENT OF TRANSPORTATION RALEIGH, N.C. PROPOSAL INCLUDES ADDENDUM No. 2 DATED 07-13-2017 INCLUDES ADDENDUM No. 1 DATED 07-12-2017 DATE AND TIME OF BID OPENING: JULY 18, 2017 AT 2:00 PM CONTRACT ID C204024 WBS 45877.3.1 FEDERAL-AID NO. NHPIM-0795(6) COUNTY WAYNE T.I.P. NO. I-5935 MILES 13.500 ROUTE NO. I 795 LOCATION I-795 FROM US-70 TO THE WILSON COUNTY LINE. TYPE OF WORK PAVEMENT REHABILITATION. NOTICE: ALL BIDDERS SHALL COMPLY WITH ALL APPLICABLE LAWS REGULATING THE PRACTICE OF GENERAL CONTRACTING AS CONTAINED IN CHAPTER 87 OF THE GENERAL STATUTES OF NORTH CAROLINA WHICH REQUIRES THE BIDDER TO BE LICENSED BY THE N.C. LICENSING BOARD FOR CONTRACTORS WHEN BIDDING ON ANY NON-FEDERAL AID PROJECT WHERE THE BID IS $30,000 OR MORE, EXCEPT FOR CERTAIN SPECIALTY WORK AS DETERMINED BY THE LICENSING BOARD. BIDDERS SHALL ALSO COMPLY WITH ALL OTHER APPLICABLE LAWS REGULATING THE PRACTICES OF ELECTRICAL, PLUMBING, HEATING AND AIR CONDITIONING AND REFRIGERATION CONTRACTING AS CONTAINED IN CHAPTER 87 OF THE GENERAL STATUTES OF NORTH CAROLINA.
[Show full text]