Tailored to Industrial Applications

Total Page:16

File Type:pdf, Size:1020Kb

Tailored to Industrial Applications Microcontroller by Infineon Technologies Support and news: infineon News Issue Embedded World 2012 on Facebook ➔ PagE 4 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// n XMC4000 n Industry n Hexagon Microcontroller ICs and switches with galvanic application Kit „A true all-rounder for isolation Versatile development industry“ platform for XMC4000 ➔ PagE 2 ➔ PagE 4 ➔ PagE 2 MeGATreNDS iNFiNeON’S FOcUS Strong solutions Quality and cutting- for global Tailored to industrial edge technologies challenges From cars to robots; from indus- trial motors to solar inverters The world’s population is spi- applications – Infineon microcontrollers are raling. More and more mega- used across the widest range of cities with populations of 10 // New XMc4000 family applications. Almost every sec- million and more are forming. with ArM® cortex™-M4 processor ond new car, for example, has a Rising living standards, above TriCore™ controller in its engine all in emerging economies, are or powertrain system. “We have fuelling an increase in energy a strong reputation for premi- consumption. Yet the earth’s um quality among automotive energy resources are limit- manufacturers and – in general ed. And so new solutions are – for our cutting-edge technolo- gies such as embedded flash memory,” states Peter Schäfer. needed to meet the challenges of these global megatrends. “Energy conservation is key to meeting the world’s rising pow- er needs,” explains Peter Bauer, CEO of Infineon AG. “Which is why Infineon is focused on en- ergy efficiency, mobility and se- Peter Schäfer curity.” Semiconductor technol- Infineon presents XMC4000 family with Vice President and General ogies from Infineon are already ARM® processor Manager, Microcontrollers making industry, transport and everyday activities more secure XMC4000 family increases en- AD converters, delta-sigma de- ily launched by Infineon. It fea- The Munich-based semicon- n InduStry and efficient. n ergy efficiency, supports a wide modulators and timer modules tures a 120 MHz CPU, 1 Mbyte ductor giant is also a global Infineon will be unveiling its range of communications stan- as well as Ethernet, USB 2.0, embedded flash memory and leader in the industrial micro- new 32-bit XMC4000 micro- dards and simplifies software CAN and SD/MMC interfaces. 160 Kbyte RAM. Samples are controller sector, both in terms ///////////////////////////////////////////////// controller family to the gen- development,” says Dr. Stephan “We’ve channeled over thirty available now. This device will of market share and technol- eral public at the Embedded Zizala, Senior Director, Indus- years of development exper- go into series production mid- ogy. “The new XMC4000 family Ticker World 2012 fair. The microcon- trial and Multimarket Micro- tise into the XMC4000 family, May 2012. Depending on the is the perfect complement to troller units (MCUs) with ARM® controllers. also leveraging the benefits of a variant and type of housing, Infineon’s microcontroller of- Bright prospects Cortex™ M4 processors were The new MCUs are built on an widely used processor architec- the price for 10,000 microcon- fering, slotting neatly between for semiconductor custom-developed for indus- advanced CPU subsystem de- ture,” confirms Zizala. trollers will be between one and the established 16-bit XE166 trial environments and are ex- livering 80 - 180 MHz perfor- Infineon’s free DAVE™ 3 tool seven euros. n devices and the 32-bit TriCore™ market tremely versatile – as the name mance at temperatures of up to ensures quick and easy soft- platform,” explains Schäfer. XMC (cross-market microcon- 125 degrees Celsius. They also ware development, giving en- Industrial and automotive ap- Outperforming the market: In troller) suggests. The control- offer outstanding DSP func- gineers intuitive access to full plications offer huge potential. fiscal 2011, Infineon grew 14% lers are optimized for industrial tionality, a floating point unit microcontroller functionality Together, they account for over relative to the previous year. motor control, manufacturing and fast flash memory with an with minimum programming half the global market for mi- Excluding memory chips and and building automation, re- access time of just 22 nanosec- effort. crocontrollers. n microprocessors, the semicon- newable energy, logistics, and onds. The extensive range of The XMC4500 series is the first Use QR code or visit: www.infineon.com/xmc ///////////////////////////////////////////////// ductor market expanded by medical applications. “The peripherals includes four 12-bit member of the XMC4000 fam- only 3%. AUTOMOTiVe Stable market: Experts pre- dict that demand for industry Chips lower energy microcontrollers will grow by Fast and simple consumption an impressive 7% every year through 2014. // User-friendly software development with the DAVe™ 3 toolset Cars have to become more ef- ficient. This applies to electric makes it easy for engineers to tomatic code generation. Alter- bedded applications. and hybrid vehicles just as n InduStry develop application software natively, developers are free to To further facilitate XMC4000 much as it does to gas and die- Software development is the that exposes the full potential integrate their own apps. designs, Infineon collaborates sel engines. Lower consumption most labor-intensive process of Infineon’s powerful hard- Apps can be easily configured with over 20 other providers of means lower emissions, or – in in embedded system design. ware. using the graphical user inter- complementary development the case of electric cars – longer The software for these systems DAVE™ 3 includes a GNU com- face and adapted to the widest tools, software solutions, train- driving distances because the is becoming increasingly com- piler, a debugger and data range of applications. Exam- ing and consulting services. n batteries last longer. Infineon’s plex – at a rate that even out- visualization utilities. Other ples include peripheral driv- chips are making a valuable paces Moore’s Law. Infineon’s commonly used compilers and ers based on PWM, SPI, CAN or contribution to sustainable mo- Innovative products: Infineon free development environment, debuggers can be easily added ADC, middleware components bility through innovations such is ideally placed to capitalize DAVE™ 3 (Digital Application to this development environ- such as TCP/IP, USB, file sys- as the TLE9267QX system basic on the growing market for in- Virtual Engineer), was created ment. The platform is built tems or graphical user interfac- chip for partial networking and dustry applications with in- to simplify programming and around the DAVE™ apps man- es, application abstractions for the powerful AUDO MAX mi- novative products such as the reduce development times. ager. Using predefined, tested motor control or automation, crocontroller family for energy- XMC4000 microcontrollers. This Eclipse-based platform apps, DAVE™ also supports au- and even fully configurable em- efficient drivetrain. ➔ PagE 2 2 Microcontroller News // by infineon Technologies // issue embedded World 2012 ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// Hitex evaluation board Raising efficiency levels for XMC4000 // AUDO MAX family boosts performance in new automotive applications software development effort for tegrity Level) certification. The n AUTOMOtIVE our customers,” explains Prod- controller’s GPTA module en- Microcontrollers are built into uct Manager Günter Hank. ables up to four electric motors every modern vehicle. they The AUDO MAX family also to be controlled at the same regulate the engine, cut fuel meets rising demands for data time, making this solution also nal control, LED matrix control, consumption and CO2 emis- and operating reliability with ideal for motor control in elec- RGB and A/D conversion. sions, and increase safety. Yet ASIL (Automotive Safety In- tric or hybrid cars. n The board has been designed the performance requirements as an add-on to Infineon’s for MCUs are continually in- Hexagon Application Kit and creasing. is therefore compatible with Infineon’s AUDO MAX family DAVE™ apps. XMC-HiLight has delivers the computing horse- direct interfaces to Hexagon’s power these parts need. Built human-machine interface on the TriCore™ architecture, (HMI) and actuator (ACT) satel- AUDO MAX delivers around lite cards. 52 percent more performance Developers can easily add their than its predecessor, AUDO Fu- own hardware extensions us- ture, with clock frequencies of ing an optional prototype board up to 300 MHz in 90 nanometer that attaches to XMC-HiLight. technology. This makes AUDO Various assembly options are MAX a powerful core for future available, enabling distribu- motor control generations. tors to easily create OEM vari- The proven asymmetrical sin- troduced a compact, all-in-one ants for training and promotion
Recommended publications
  • EMEA Arrow EMEA Design Partner Network Catalogue
    EMEA Arrow EMEA Design Partner Network Catalogue [email protected] Engineering Solutions Center Expertise | Enablement | Support The mission of Arrow’s Engineering Solutions Center is to support the field team in their design activities ranging from NPI proposals, consultancy in complex areas like software, IoT, FPGAs, high-end to complete system concepts and Arrow’s ready-to-use solutions. Through the TestDrive board loan program, the ESC provides many supplier development boards and Arrow developed solutions to enable quick design starts. Design, customization, prototyping and certification services are available from Arrow’s comprehensive 3rd Party Network. 2 Editorial Dear Arrow Colleagues, A warm welcome to what I hope you will find to be a useful and informative first edition of the Arrow EMEA Design Partner Catalogue. To stay competitive, our customers must continuously leverage leading edge technologies while shortening design cycles. Further, the majority of today’s innovations are happening at the level of software, applications, sensing capabilities, connectivity and security. These dynamics require new skills and capabilities that our customers may lack. This is where the Arrow EMEA Design Partner Network can help. Our partners provide immediate access to pre-screened, Minimize design time qualified, and certified third-party design services companies. Arrow’s network of some of the best and speed time-to-market engineering design services companies can save your customers time and money and allow them to bring by enabling the Arrow products to market faster. Partners can support them EMEA Partner Network all the way from specification development to turnkey board design or be an extension to their engineering to get involved early in team.
    [Show full text]
  • Industrial Automation
    Industrial Automation www.infineon.com/automation Content Introduction 4 Product Solutions – Control 36 XMC – 32-bit Industrial Microcontrollers 36 Automation Applications 6 AURIX™ – 32-bit Microcontrollers 38 Industrial PCs 6 CAN Transceivers 40 Human Machine Interface (HMI) 7 Programmable Logic Controller (PLC) 8 Product Solutions – Interface 42 Micro PLC 9 HITFET™ Low-Side Drivers 42 Industrial Power Supply 10 PROFET™ High-Side Drivers 44 Industrial Sensors 11 SPIDER – Universal SPI Driver for Low-Current 46 Motor Control and Drives 12 Loads Industrial Communication 13 ISOFACE™ – Galvanic Isolated High-Side 48 Linear Actuator 14 Switches and Input ICs Wireless Control 49 Product Solutions – Power Supply 15 SmartLEWIS™ Family – Smart Low Energy 50 CoolMOS™ – High Voltage Power MOSFETs 15 Wireless System 600V CoolMOS™ P6 15 Current Sensors 51 600V and 650V CoolMOS™ C6/E6 17 Hall-Effect Switches 52 650V CoolMOS™ CFDA 18 Linear Hall Sensors 53 OptiMOS™ – Low and Medium Voltage 19 Speed Sensors 54 Power MOSFETs Integrated Pressure Sensors ICs 55 Small Signal Power MOSFETs 20 iGMR Angle Sensors 56 SiC Schottky Diodes 21 Constant Current Relay Drivers (CCRD) 58 650V thinQ!™ SiC Schottky Diodes 21 Generation 5 Product Solutions – Security and Protection 59 1200V thinQ!™ SiC Schottky Diodes 22 OPTIGA™ TPM (Trusted Platform Module) 59 Generation 5 OPTIGA™ Trust – Authentication Solution for 60 Silicon Power Diodes 24 Increased Security at Lower System Costs Discrete IGBT 27 OPTIGA™ Trust P – Programmable Device 61 650V TRENCHSTOP™ 5 Discrete IGBT 27 Authentication Solution 600V and 1200V HighSpeed 3 Discrete IGBT 29 SLM 97 – Machine-to-Machine (M2M) Portfolio 62 DC/DC Converters 31 DC/DC Voltage Regulator – DrBlade™ 2 32 RC-Drives and RC-Drives Fast 34 Voltage Regulators 35 3 Introduction The Automation Advantage The growing pace of industrial automation and networking Smart semiconductor solutions for smart factories across industrial control systems presents manufactur- Our semiconductor solutions are also speeding the transi- ers with evolving challenges.
    [Show full text]
  • Cyclone LC Programmers User Manual Purchase Agreement
    Cyclone LC Programmers User Manual Purchase Agreement P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. P&E Microcomputer Systems, Inc. does not assume any liability arising out of the application or use of any product or circuit described herein. This software and accompanying documentation are protected by United States Copyright law and also by International Treaty provisions. Any use of this software in violation of copyright law or the terms of this agreement will be prosecuted. All the software described in this document is copyrighted by P&E Microcomputer Systems, Inc. Copyright notices have been included in the software. P&E Microcomputer Systems authorizes you to make archival copies of the software and documentation for the sole purpose of back-up and protecting your investment from loss. Under no circumstances may you copy this software or documentation for the purpose of distribution to others. Under no conditions may you remove the copyright notices from this software or documentation. This software may be used by one person on as many computers as that person uses, provided that the software is never used on two computers at the same time. P&E expects that group programming projects making use of this software will purchase a copy of the software and documentation for each user in the group. Contact P&E for volume discounts and site licensing agreements. P&E Microcomputer Systems does not assume any liability for the use of this software beyond the original purchase price of the software.
    [Show full text]
  • EECS 452 – Project Hardware Possibilities
    EECS 452 – Project Hardware Possibilities ñ This lecture is focused on programmable and non-programmable devices for potential project use. ñ Projects are not restricted to using C5515/DE2-70. What are some alternatives? ñ This is an awareness building lecture. It is not comprehensive. Other choices exist. ñ There has been an explosive growth of programmable/configurable devices. How to choose? The good news about computers is that they do what you tell them to do. The bad news is that they do what you tell them to do. — Ted Nelson If you can get your hands on the part, it’s obsolete. — anon Nothing is more difficult, and therefore more precious, than to be able to decide. — Napoleon Bonaparte EECS 452 – Fall 2014 Project Hardware Possibilities – Page 1/90 Thursday – Sept 18, 2014 Before we start . In today’s world there exist many, moderately powerful, very low cost, single board computers that one can use to self-educate. When doing DSP one very often wants/needs to generate an observe signals. The cost of the needed equipment can greatly dwarf the board cost. However, the cost of “equipment” is dropping. Consider the Digilent Analog Discovery. ñ $159 academic ñ 2-channel oscilloscope ñ 2-channel waveform generator ñ 16-channel logic analyzer ñ 16-channel digital pattern generator ñ Spectrum Analyzer ñ Network Analyzer ñ Voltmeter ñ Digital I/O ñ ≈$220 with bells and whistles From a Digilent web page. EECS 452 – Fall 2014 Project Hardware Possibilities – Page 2/90 Thursday – Sept 18, 2014 Risk and other ñ The safest choice in implementing your project is to make use of the C5515 and/or DE2-70 (or DE0-nano).
    [Show full text]
  • XMC™ – Product Introduction XMC™ Microcontrollers April 2016 Agenda
    XMC™ – Product Introduction XMC™ Microcontrollers April 2016 Agenda 1 Introduction to XMC™ 2 Product Portfolio 3 Safety 4 Security 5 Ecosystem Copyright © Infineon Technologies AG 2016. All rights reserved. 2 Agenda 1 Introduction to XMC™ 2 Product Portfolio 3 Safety 4 Security 5 Ecosystem Copyright © Infineon Technologies AG 2016. All rights reserved. 3 What is XMC™ › XMC™ - Industrial & Multimarket Microcontroller based on ARM® Cortex® M › XMC™ - Application / Segment specific Microcontrollers One microcontroller platform Countless Solutions › XMC™ comprises of 2 major families XMC1000™ XMC4000™ › Cortex® M0 based › Cortex® M4 based › Applications: › Applications: › Low cost motor control › Automation (Industrial › Lighting Drives, PLC, I/O) › Power conversion › Power conversion Our differentiators are the peripherals not the core Copyright © Infineon Technologies AG 2016. All rights reserved. 4 XMC™ – Target Segments Home & Building Power & Factory Transportation Professional Automation Energy Automation Applications Requirements › Form factor, size › Energy efficiency › Energy efficiency › Robustness › Up-time and weight › Robustness › Ease of use for harsh › Connectivity › Family concept for harsh › Remote environment › Reliability & › IP protection environment monitoring › Functional safety quality › Fast ramp-up › Up-time › Appealing design › Reliability & › Lifetime and form factors quality › Safety & security › Lifetime It's all about… MOTOR CONTROL LIGHTING POWER CONVERSION COMMUNICATION Copyright © Infineon Technologies AG 2016.
    [Show full text]
  • DALI 2.0 Software Stack for Microcontrollers Saves Costs by Marcelo Williams Silva and Georg Huba, Infineon Technologies
    MICROCONTROLLERS & PROCESSORS DALI 2.0 software stack for microcontrollers saves costs By Marcelo Williams Silva and Georg Huba, Infineon Technologies This article introduces a DALI 2.0 software stack for XMC1000 microcontrollers. This stack was developed by Infineon in close cooperation with Xenerqi and accelerates design of LED lighting applications. Amongst other things, the XMC1000 nication. Furthermore, the XMC microcon- XMC1200, XMC1300 and XMC1400 series microcontroller family with ARM-Cor- trollers can be used to implement the power with flash versions up to 200 KB and enclo- tex-M0 offers optimised peripherals and supply for the LED driver, supporting all stan- sures with up to 64 pins. Even the entry-level functionalities for smart lighting control. This dard two-stage switched-mode power supply XMC1100 series, with its basic feature set, makes it possible to address a host of different topologies. provides many industrial applications with applications both indoors and in commercial cost-effective access to the 32-bit world with buildings. It is within this environment that The key features of the XMC1000 family for 12-bit AD converters and powerful 16-bit tim- DALI (Digital Addressable Lighting Interface) smart lighting systems are: automatic bright- ers of Capture/Compare Unit 4 (CCU4). The has established itself as a standardised inter- ness control (based on high-frequency pulse XMC1200 series includes additional appli- face for controlling lighting control gear. With modulation), flicker-free dimming via 9 out- cation-specific
    [Show full text]
  • XMC Industrial Microcontroller Product Brochure
    XMC™ – 32-bit industrial microcontrollers One microcontroller platform. Countless solutions. www.infineon.com/xmc 2 Contents XMC™ – target markets and applications 4 XMC™ – one microcontroller platform. Countless solutions. 5 XMC1000 – optimized peripherals for real-time success 6 XMC4000 – advanced industrial control & connectivity 7 Applications 8 Industrial automation 8 Motor control 10 Switched-mode power supplies 12 Smart lighting 15 Efficient tools, software and services from evaluation 18 until production – XMC™ ecosystem and enablement DAVE™ 18 XMC™ link 19 Embedded coder library for XMC™ 19 IEC60730 class B library for XMC™ 19 Kits & evaluation boards 20 Functional safety for the XMC4000 MCUs family 22 Embedded security for XMC™ MCUs 22 XMC™ package overview 23 Feature overview XMC™ family 24 3 XMC™ – target markets and applications Infineon’s XMC™ 32-bit industrial microcontroller portfolio Highlights include analog-mixed signal, timer/PWM is designed for system cost and efficiency for demanding and communication peripherals powered by either an industrial applications. It comes with the most advanced ARM® Cortex®-M0 core (XMC1000 family) or a Cortex®-M4 peripheral set in the industry. Fast and largely autonomous core with a floating-point unit (XMC4000 family). peripherals can be configured to support individual needs. XMC™ segment et Factory Building Transportation Power & energy Home & automation automation professional mark › Industrial drives › LED lighting › eBikes › SMPS › Home appliances get › I/O modules › BLDC motor › CAV › UPS › Aircon r › Micro PLC › Solar inverters › Power tools Ta › COM modules › Chargers e tenc ompe s of c ea Ar 4 XMC™ – one microcontroller platform. Countless solutions. Infineon has combined its wealth of experience in ARM® Cortex®-M cores, is dedicated to applications in microcontroller design for real-time critical applications the segments of power conversion, factory and building with all the benefits of an industry-standard core.
    [Show full text]
  • Dataman Price List
    215 E. Michigan Ave. Orange City, FL 32763 Tel: (386) 774-7785 / Fax: (386) 774-7796 Price List February 2021 Programmers Universal Programmers Part No Description Price Dataman 40Pro Universal ISP Universal 40-pin chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman 40Pro is a small, fast and powerful programmer $595.00 Programmer supporting over 37,000 programmable devices. The 40Pro is built to meet the demands of development labs and field engineers for universal and portable programming. Dataman 48Pro2 Super Fast Universal Super fast universal 48-pin chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman 48Pro2 can program without the need for $1,195.00 ISP Programmer a family-specific module, giving you the freedom to choose the optimal device for your design. The 48Pro2 is built to meet the demands of development labs and field engineers for super fast universal programming. Dataman 48Pro2AP Super Fast Industrial Super fast industrial universal programmer with ISP capabilities and USB 2.0 connectivity. The 48Pro2AP is built to meet the demands of Call for price Universal Programmer production programming with automated handlers and ATE machines.Supporting over 81,000 devices with new support being added monthly, the Dataman 48Pro2AP gives you the freedom to choose the optimal device for your requirements. Dataman 48Pro2C Super Fast Universal Super fast universal 48-pin chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman 48Pro2C can program without the need $995.00 ISP Programmer for a family-specific module, giving you the freedom to choose the optimal device for your design.
    [Show full text]
  • AURIX™ 32-Bit Microcontrollers for Automotive and Industrial Applications Highly Integrated and Performance Optimized
    AURIX™ 32-bit microcontrollers for automotive and industrial applications Highly integrated and performance optimized Issue 2020 www.infineon.com/aurix Contents TriCore™ family concept 3 AURIX™ for powertrain applications 36 Evolution of TriCore™ generations 4 AURIX™ for xEV applications 43 TriCore™ based product roadmap 5 AURIX™ for safety applications 48 AURIX™ product selector 6 AURIX™ for connectivity applications 61 PRO-SIL™ safety concept 7 AURIX™ for transportation applications 67 AURIX™ family housing options 8 AURIX™ for industrial applications 75 AURIX™ family system architecture 9 Tool partners 85 Peripheral highlights 14 AURIX™ security features 18 Embedded software (AUTOSAR etc.) 21 Development support 23 Multicore software development with AURIX™ 24 Kits and evaluation boards 25 Ease of use 29 AURIX™ solution finder 29 AURIX™ forum 30 Artificial intelligence in AURIX™ TC3xx 31 AURIX™ Development Studio 32 AURIX™ and XMC™ PDH partners 33 2 Family highlights › Compatibility and scalability › Easy to use › Lowest system cost › Broad portfolio › Industry benchmark system › Certified to automotive standards performance Applications › Powertrain domain controller › Diesel direct injection › Gasoline direct injection › Automatic transmission Gasoline multi-port injection Transfer case/torque vectoring › › Powertrain Applications › Battery management › Inverter › Off-board charging › Low-voltage DC-DC xEV › Charging station › High-voltage DC-DC Applications › Chassis domain control › Short-range radar (24/60 GHz) system › Electric
    [Show full text]
  • Wired-IOT R&D Plan
    Manhattan 2 Smart Building Interconnection-Standards Development Initiative By Glenn Weinreb, CTO, Manhattan 2, Printed July 30, 2020 1 Introduction Manhattan 2 (Ma2) intends to develop electrical, mechanical, and communications standards that define how devices interconnect within the building of the future. Devices include motors that control thermal covers over physical wall windows, motors that control curtains and blinds, fans in ducts, dampers in ducts, lights, occupancy sensors, washing machines, ovens, refrigerators, dish washers, HVAC systems, pumps that control 58°F ground source water, thermal storage water, valves on room water-filled radiators, etc. This initiative involves developing a new 2-wire communication standard between multiple devices that provides the following features: supports CANbus communication between ~$1 microprocessors, no damage upon accidental short to 220VAC, devices use little power when not in use, wiring supports tree topology (daisy chain not required), ≥ 99.999% reliable (not wireless), and transceivers consume ≤ ~25mW of power when signaling (as opposed to 10x more utilized by RS-485 and traditional CANbus). We make use of existing standards whenever possible, and propose new standards as needed. Researchers do not necessarily design products to be manufactured and sold. Instead, they propose interconnection standards, and prototypes that demonstrate those standards. These are then provided to standards bodies (e.g. IEEE), which modify as desired, and establish plug-and-play standardization. All materials produced by researchers are given away for free, to encourage utilization by standards bodies, to reduce CO2 emissions. This includes mechanical drawings, electrical schematics and software source code. Manhattan 2 Smart Building Interconnection-Standards Development Initiative, www.Manhattan2.org 1 Ma2 is also developing standards that define how solar material attaches directly to building surfaces, such as plywood.
    [Show full text]
  • Highlights of Exhibiting Partners
    Highlights of Exhibiting Partners XMC Developer Day 2015, Munich Henk-Piet Glas Support for Infineon XMC family Product Overview of TASKING VX-toolset for ARM Copyright © 2015 Altium BV Overview of the TASKING-VX toolset for ARM . Support for all Infineon XMC derivatives and boards . C/C++ compiler with integrated static code analyzers for: – CERT C Secure Coding standard – MISRA C guidelines . Industry standard Eclipse IDE containing: – Intuitive toolchain menu – Instruction-set simulator – On-chip debugging over JTAG using: ► miniWiggler from Infineon ► J-Link family from SEGGER . Available for Windows, Linux and Mac OS X . Compiler Qualification Kit available for certifications according to ISO 26262 / IEC 61508 standards . Full-house support for C166/XC166/XE166, XMC and TriCore/AURIX allowing straightforward migration between microcontrollers and TASKING toolchains Copyright © 2015 Altium BV 3 Keil® MDK Version 5 IDE and Middleware for ARM® Cortex®-M based MCUs Christopher Seidl Technical Marketing Manager 4 Keil® MDK Version 5 Development System µVision® IDE with ULINK™ ARM® C/C++ Compiler Debug Editor Adapters µVision® Debugger with Pack Installer Trace ULINKpr ULINK2 MDK Core MDK o Evaluation Device CMSIS MDK-Professional Boards Middleware System/Start CMSIS- up CORE Network Ethernet Driver CMSIS-DSP USB Host File System SPI Driver … CMSIS- Software Packs Software USB Device Graphics USB Driver RTOS 5 << Heinz-Juergen Oertel << //------------------------------------------------------------------------------------------------------------------------
    [Show full text]
  • Μc/ Probe® Graphical Live Watch®
    μC/ Probe® Graphical Live Watch® User’s Manual V4.0 Weston, FL 33326 Micriμm 1290 Weston Road, Suite 306 Weston, FL 33326 USA www.micrium.com Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Micriμm Press is aware of a trademark claim, the product name appears in initial capital letters, in all capital letters, or in accordance with the vendor’s capitalization preference. Readers should contact the appropriate companies for more complete information on trademarks and trademark registrations. All trademarks and registered trademarks in this manual are the property of their respective holders. Copyright © 2016 by Micriμm except where noted otherwise. All rights reserved. Printed in the United States of America. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. μC/Probe and the accompanying files are sold "as is". Micriμm makes and customer receives from Micriμm no express or implied warranties of any kind with respect to the software product, documentation, maintenance services, third party software, or other services. Micriμm specifically disclaims and excludes any and all implied warranties of merchantability, fitness for a particular purpose, and non-infringement. Due to the variety of user expertise, hardware and software environments into which μC/Probe may be subjected, the user assumes all risk of using μC/Probe. The maximum liability of Micriμm will be limited exclusively to the purchase price. 600-uC-Probe-007 Table of Contents Chapter 1 Introduction ...........................................................................................
    [Show full text]