DOCSLIB.ORG

Ergonomic Hand Tools Computorq3 Electronic

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

SALES BLASTER NEW! RATCHETING COMBINATION WRENCHES Ratcheting gear minimizes swing arc in tight places See Page 6 IMPACT WRENCHES High power to weight ratio, fast rundown and no torque reaction to operator See Page 10 COMPUTORQ3 ERGONOMIC HAND TOOLS ELECTRONIC TORQUE WRENCH We use a scientific approach to Simple to use. Sleek new design. develop ergonomic hand tools See Pages 8 - 9 See Page 2 OFFER VALID WHILE SUPPLIES LAST APRIL 1, 2018 TO JULY 31, 2018 Trust CDI's Factory Service Center for all your CDI torque product repair and calibration work. www.cdifactoryservice.com COMPUTORQ 3 ELECTRONIC TORQUE WRENCHES HEAVY-DUTY TORQUE & ANGLETM TORQUE WRENCH LEADING THE WAY IN HEAVY-DUTY TORQUE AND ANGLE APPLICATIONS WITH The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench INNOVATIVE SOLUTIONS THAT MAKE A DIFFERENCE IN DOING THE JOB RIGHT. that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. The CDI 600 ft.lb. Heavy-Duty Torque & AngleTM Torque Wrench eliminates the need for Simply set the desired torque value and apply force until the green LED illuminates. Great for angle gauges and protractors, providing the most accurate and efficient way to achieve torque light industrial, automotive, motorcycle, watercraft and aircraft applications. plus angle tightening sequences now specified by many manufacturers. The digital readout displays a torque setting then with a push of a button, switches to the angle mode. Angle readout Product Code Description List Price: Sale Price: not affected by ratcheting. Angle calculation based on the same gyroscopic technology that 2401CI3 1/4" Drive 24-240 ft. lb. $620.00 $265.71 maintains helicopters at level flight. 2401CI3HA 1/4" Drive 24-240 ft. lb. $830.00 $355.71 • Torque Accuracy: (2% CW & 3% CCW FROM 20 – 100% F.S.) HIGH ACCURACY (4% CW & 6% CCW FROM 10 – 19% F.S.) 1002CF3 3/8" Drive 10-100 ft. lb. $670.00 $287.14 • Angle Accuracy: ± 3.8% of indicated value • Angular Display Resolution: 1° 1002CF3HA 3/8" Drive 10-100 ft. lb. $880.00 $377.14 Length Wt. HIGH ACCURACY Product Code Drive Ft. Lb. In. Lb. Nm Angle In. (mm) Lbs. (kgs) 2503CF3 1/2" Drive 25-250 ft. lb. $785.00 $336.43 3 6004TAA ⁄4” 120 - 600 1440 - 7200 156 - 780 0-360° 49 (1244.6) 14 (6.35) 2503CF3HA 1/2" Drive 25-250 ft. lb. $995.00 $426.43 List Price: Sale Price: HIGH ACCURACY $3,210.00 $1,375.71 The certification of accuracy provided per ASME and ISO Standards is 20% to 100% of full scale. TORQUE & ANGLE™ ELECTRONIC TORQUE WRENCHES DIGITAL TORQUE CHECKER The CDI Torque and Angle Electronic Wrench incorporates 21st Century Technology in a simple to use digital wrench. Specifically designed to meet the needs of the torque Perfect for checking mechanical and digital torque professional where torque plus angle is required. It features three units of torque, ft.lbs. wrenches regularly before use. Simple operation In.lbs. and Nm as well as the angle mode. and affordable, to allow convenient mounting close to each departments where torque wrenches are The Torque and Angle wrench allows the technician to apply a specific torque load, followed used frequently by the angle specification, all in one convenient wrench. It features a three LED light bar and audible buzzer. As the angle mode is a separate function, the wrench can also be used as a stand alone digital torque wrench. Product Code Description List Price: Sale Price: 2503-F-DTC 1/2" Square Drive 25-250 ft. lb. $1,045.00 $447.86 Product Code Drive in. lb. ft. lb. Nm Angle List Price: Sale Price: 1002TAA-CDI 3/8 in. 120 - 1200 10 - 100 12.6 - 135.6 0-360° $1,030.00 $441.43 1003-F-DTC 1/2" Digital Torque Checker $1,240.00 $531.43 2503TAA-CDI 1/2 in. 300 - 3000 25 - 250 33.8 - 338 0-360° $1,165.00 $499.29 2 W40TC4 W26TC4 W55TC10 26" PROFESSIONAL SERIES TOOL CABINET Product Code Description List Price: Sale Price: W26TC4 26" Wide x 20" Deep 4-Drawer Top Chest $1,405.00 $602.14 W26RC7 26" Wide x 20" Deep 7-Drawer Roll Cabinet $2,005.00 $859.29 40" PROFESSIONAL SERIES TOOL CABINET Product Code Description List Price: Sale Price: W40TC4 40" Wide x 20" Deep 4-Drawer Top Chest $2,280.00 $977.14 W40RC7 40" Wide x 20" Deep 7-Drawer Roll Cabinet $2,675.00 $1,146.43 55" PROFESSIONAL SERIES TOOL CABINETS Product Code Description List Price: Sale Price: W55TC10 55" Wide x 24" Deep 10-Drawer Tool Chest $3,460.00 $1,482.86 W40RC7 W55RC11 55" Wide x 24" Deep 11-Drawer Roll Cabinet $4,515.00 $1,935.00 W26RC7 W55RC11 Features • Made of High-Quality Class I steel to enhance • All 4" and deeper drawers provide for adding • Paint pretreatment process both sprays strength and finish. additional slides to double drawer capacity. and immerses boxes for added corrosion • Double wall construction provides strength. • Rolled hem on all drawers provide superior protected. • Reinforcement corner gussets add strength strength, rigidity and safety. • Drawer liners included at no extra charge. and reduce racking. • Casters absorb vibrations transmitted to • Gas struts in lid of chest make lid easy to • 2" mounting centers provide flexibility in frame while moving on uneven surfaces. open and close. arranging drawers to individual needs. • Casters equipped with pedal brake and ball • Two point locking design adds extra security • Drawers equipped with positive latching drawer bearings for easy operation. on all chests retention to prevent unwanted drawer opening. • High luster paint protects against scratches, • W40X50RV Side Handles W55RCBS • All drawers equipped with 75 pound full pealing, blistering and corrosion. extension ball bearing slides with quick disconnect. Consult CAT3 Pages 46-49 for Additional Colors MODULAR INDUSTRIAL STORAGE UNPRECEDENTED STORAGE OPTIONS TO ACCOMMODATE ANY STORAGE NEED Cabinet Heights The Williams® Modular Industrial Storage Program is designed, engineered from 30" to 59" and built specifically for industrial settings, processes, and systems. Heavy-duty steel construction, innovative safety and security features, and workplace-specific configurations provide for customizable, scalable storage that meets even the most complex needs. Color Options WORK SURFACES Red: Standard Available in a variety of Black: B shapes and materials. Blue: BL Cabinet Widths Multiple Drawer from 23" to 58" 100% View Full-Width Aluminum SWP Plus Series - Standard full length Height/Depth Options Drawer Extension Handles with Safety 32-1/2" Wide forklift base Overlap and 45˚ Angle Ask your Snap-on Industrial Brands Representative for full options & pricing! 3 27 PIECE TOOLS@HEIGHT STARTER SET Product Code Description List Price: Sale Price: WSC-27-TH 27 Piece Tools@Height Starter Set $2,195.00 $940.71 WSC-45-TH 45 PIECE TOOLS@HEIGHT STARTER SET Product Code Description List Price: Sale Price: WSC-45-TH 45 Piece Tools@Height Starter Set $2,900.00 $1,242.86 WSC-72-TH 72 PIECE TOOLS@HEIGHT BASIC MAINTENANCE SERVICE SET Product Code Description List Price: Sale Price: WSC-72-TH Complete Tools@Height Basic $5,800.00 $2,485.71 Maintenance Tool Set in Safe Bucket WSC-116-TH 225 PIECE TOOLS@HEIGHT INTERMEDIATE MAINTENANCE SERVICE SET 116 PIECE TOOLS@HEIGHT GENERAL MAINTENANCE SERVICE SET Product Code Description List Price: Sale Price: Product Code Description List Price: Sale Price: WSC-225-TH Complete Tools@Height Intermediate $14,900.00 $6,385.71 WSC-116-TH Complete Tools@Height General Service $8,385.00 $3,593.57 Tool Set (223 Pieces Total) Tool Set Only (115 Pieces Total) 4 20008 DROP FORGED C-CLAMPS Deep Throat Design, Copper Plated Screw Screw Product Capacity Throat Depth Diameter Working Max. Hand Frame Proof Sale WS-1172RSC WS-1172YSC Code (Inches) (Inches) (Inches) Load (lbs) Load (lbs) Load (lbs) List Price: Price: 20002 2 2-1/4 9/16 2000 2600 3500 $33.00 $14.14 20003 3 2-7/16 9/16 2400 2880 3500 $37.25 $15.97 ® 20004 4 3-1/4 11/16 2800 4480 6500 $42.00 $18.00 SUPERCOMBO 20006 6 4-1/16 3/4 3400 4700 6900 $58.00 $24.86 COMBINATION WRENCHES 20008 8 5 3/4 4000 4930 6900 $76.75 $32.90 20010 10 6 7/8 5000 5500 8000 $97.25 $41.69 7 Piece Hi-Vis Combination Wrench Set, 12 Point, SAE, in Pouch 20012 12 6-1/2 7/8 6000 7000 9500 $148.00 $63.43 Product Code Description List Price: Sale Price: Features WS-1170RSC 7 Pc. Hi-Vis RED Combination Wrench Set, $169.40 $74.14 • Copper plated screw resists weld splatter 12 pt, SAE, in Pouch • Drop-forged and heat treated for maximum strength and greater rigidity WS-1170YSC 7 Pc. Hi-Vis YELLOW Combination Wrench Set, $169.40 $74.14 • I-Beam design for extra strength 12 pt, SAE, in Pouch • Powder coated frame resists rust • "Safety Yellow" color makes clamps easy to locate in dark work areas 11 Piece Hi-Vis Combination Wrench Set, 12 Point, SAE, in Pouch Product Code Description List Price: Sale Price: 11 Pc. Hi-Vis RED Combination Wrench Set, $338.20 $147.86 WS-1171RSC 12 pt, SAE, in Pouch 11 Pc. Hi-Vis YELLOW Combination Wrench Set, $338.20 $147.86 WS-1171YSC 12 pt, SAE, in Pouch 20042 14 Piece Hi-Vis Combination Wrench Set, 12 Point, SAE, in Pouch Product Code Description List Price: Sale Price: DROP FORGED C-CLAMP SET 14 Pc. Hi-Vis RED Combination Wrench Set, $556.75 $244.29 WS-1172RSC 12 pt, SAE, in Pouch Product Code Contents Include: List Price Sale Price: WS-1172YSC 14 Pc.
Recommended publications
  • How Do I Set the Torque on S/R Preset Torque Wrenches?

    How Do I Set the Torque on S/R Preset Torque Wrenches?

    Needed Items: • S/R preset torque wrench from the LTC, LTCR, or LTCS Series. • If LTC wrench, an SD or SDRT interchangeable head must be used. Frequently Asked Questions • S/R Combination Adjusting and Release Tool (CART Tool). • Torque Tester of +/- 1% I.V. Accuracy or better. • Veritorq, Torq-Tronics® (Used in this demonstration.) or System 4/5 How do I set Start torque tester. the torque • Allow tester to warm up. on S/R • Check tester for zero. preset torque • Set tester to use selected unit of measure. • Set tester to capture initial peak torque. wrenches? Torque Adjustment Procedure: The CART Tool has two hex keys, one inside the S/R Preset Torque Wrenches: LTC, other. The inner hex key is “T” shaped, enclosed in LTCR, and LTCS Series a vinyl cushion, and is pointed. This is the Torque Adjustment Key. It is used to adjust the torque setting. Rotating it clockwise when it is engaged with the adjustment nut increases the torque setting; rotating it counter-clockwise when it is engaged with the torque adjustment nut decreases the torque setting. The outer key is the Locking Key. It is “L” shaped and has a larger hex size. This key engages a jam nut inside the wrench to lock the torque setting in place. To adjust the torque, the nuts must first be disengaged from contact with each other. Align the CART Tool with the rear of the torque wrench as shown here. Insert the Torque Adjustment Key into the wrench as shown. The Locking Key should not yet be engaged.
  • National Warehouse Retailer Tools - MODESTO - July 11Th

    National Warehouse Retailer Tools - MODESTO - July 11Th

    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
  • BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: Info@Buglersales.Com 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP

    BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP

    2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC.
  • Disassembly Assembly Quick

    Disassembly Assembly Quick

    Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Drive & Motor Models: 60051, 60052 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply. Open 51655 ON/OFF Valve to deplete air. Disconnect hose from air supply. Drive/Motor Disassembly: Assembly Instructions - Quick-Change Pencil Grinder Header 1. xxxxxx 1. Rotate 60083 Lever 90° to open collet. Remove insert tool from collet. Notice: If necessary, use 60116 wrench. Turn counterclockwise. 2. Remove collet insert from drive shaft. Turn conterclockwise. 3. Use a piece of rubber to protect housing and fasten in vise with aluminum or bronze jaws. Use an adjustable wrench to remove 60066 Nose Cone. Turn counterclockwise. 60081 Washer 60094 Spring 60087 Washer Seal 4. Carefully, remove 60081 Washer, 60094 Spring and 60087 Washer Seal. HEAT GUN 5. Invert tool in vise. Use a HEAT GUN to warm housing and soften thread sealant. 6. Use an adjustable pin spanner wrench to remove 60110 or 60111 Cover. Turn counterclockwise. Set cover, brake and hose assemblies aside. See: Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Bushing & Brake, to replace air bushing and/or brake. 7. Remove from vise. NOTICE: Quick-Change Chuck is SPRING LOADED! Use caution when removing 60077 Bumper. Use an adjustable wrench on 60077 Bumper, and insert 4 mm hex key into end of drive shaft. Carefully, turn bumper counterclockwise to remove from drive shaft. 8. Use a 1/4" (6 mm) Ø diameter by ~5" (~127 mm) long screw and carefully slide, 60088 Front Seal Washer, 60089 Outer Housing Seal, 60090 Inner Race Seal, 60092 Rear Seal Washer, 60093 Bearing, 60074 End Support and 60073 Springs (19 to 20) onto screw.
  • Torque Wrench Manual English

    Torque Wrench Manual English

    Digital Electronic Torque Wrench Operating Manual Model 60648 This manual will help you to use the many MAINTENANCE AND STORAGE features of your new digital torque wrench. Before operating the torque wrench, please read ATTENTION: this manual completely, and keep it nearby for To maintain accuracy, a one-year future reference. periodic recalibration is recommended. Please contact your local dealer for FEATURES calibration details. CAUTION: ● Interchangeable head 1. Over-torque (110% of Max. torque range) ● Digital torque value readout could cause breakage ● +/- 2% accuracy or loss of accuracy. ● CW and CCW operation 2. Do not shake violently ● Peak hold and track mode selectable or drop wrench. ● Buzzer and LED indicator for the 9 pre-set 3. Do not use the wrench target torques as a hammer. ● Water contact indicator 4. Do not leave the wrench in any place exposed to ● Engineering units (ft-lb, in-lb, N-m, kg-cm) excessive heat, humidity, or direct sunlight. 5. Do not use the wrench in water (not waterproof). selectable 6. If the wrench gets wet, wipe it with a dry towel ● Stores up to 50 data files for recall and joint as soon as possible. The salt in seawater can be torque auditing especially damaging. ● Auto Sleep after about five minutes idle 7. Do not use organic solvents, such as alcohol or ● (2) AAA Batteries included paint thinner when cleaning the wrench. 8. Keep the wrench away from magnets. 9. Do not expose the wrench to dust or sand as this could cause serious damage. 10. Do not apply excessive force to the LCD panel.
  • 05/29/18 Tools & Home Improvement Auction

    05/29/18 Tools & Home Improvement Auction

    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction

    1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction

    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
  • Specialty Tools Brake Tools

    Specialty Tools Brake Tools

    Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
  • United Rentals Tool Solutions Catalog

    United Rentals Tool Solutions Catalog

    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
  • Parr Service Clamps, Fixtures, and Tools

    Parr Service Clamps, Fixtures, and Tools

    Bulletin No. 307 Parr Service Clamps, List of tools for Parr product lines. Fixtures, and Tools Acid Digestion Vessels Part No. Description For Use with Models 264AC2 Hook Spanner Wrench 4744, 4749, & 4749A A285AC Holding Fixture 4744, 4749, & 4749A A263AC Spanner Jack Assembly with 264AC Face Spanner 4746 & 4747 264AC Face Spanner only 4746 & 4747 2583HC Service Fixture 4748 & 4748A Calorimeters Part No. Description For Use with Models 475A Service Clamp Head 1108 Series 568A Service Clamp Head 1110 A536A Service Clamp 1136 & 1138 534A Service Fixture 1107, 1109, 1109A, 1109X 700DD Tool, O-Ring Installation 1271 551A Tool, O-Ring Installation - 1109 110 9 585DD Tool, Pin Extraction All Calorimeters (except 1341) 322HW Tool, Quick Release 6510, 6520A TX03SKMM Metric Hex Wrench .89mm 6100, 6200, 6300, & 6400 TX03SK 1/32 Socket Screw Key 6100, 6200, 6300, & 6400 (pre 2009) 421A Bomb Lifter 1341, 6050, 6100, & 6200 TX14SK 9/64 Socket Screw Key 1281, 6300, & 6400 A38A Head Support Stand 1341, 6100, 6200, 6300, & 6400 A39A Head Support and Stand 1110 1005DD Forceps 6300 & 6400 876DD Cutter, Plastic Tubing 1281, 1271, 6200, 6300, & 6400 356HCW Pliers for Snap Ring 1281, 6050, 6300, & 6400 Tech Note 307 06/03/16 Page 1 Magnetic Drives Part No. Description For Use with Mag Drives 1947HC Bushing (1133HC) Installation Tool A1120HC_, A2140HC_, and A2150HC_ Series 1948HC Bushing (1133HC) Removal Tool A1120HC_, A2140HC_, A2150HC_, and A3040HC Series 1947HC2 Bushing (1133HC) Installation Tool A3040HC_ Series 1950HC Bushing (1166HC) Installation Tool A1180HC and A1750HC Series 1951HC Bushing (1166HC) Removal Tool A1180HC and A1750HC Series 2177HC Bushing (2162HC) Installation Tool A2160HC and A2170HC Series 2178HC Bushing (2162HC) Removal Tool A2160HC and A2170HC Series 2086HC Bearing Installation Tool All Magnetic Drives (manual) (A1120HC/A1180HC/A1750HC) 264AC3 Pin Spanner Wrench, 2” A1180HC, A1750HC, A2160HC and A2170HC Series 264AC4 Pin Spanner Wrench, 1½” A1120HC, A2140HC, A2150HC, and A3040HC Series 264AC5 Face Spanner Wrench, Adj.

  • Bay Country Rentalsbaybay Countrycountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY

    BayBay CountryCountry RentalsBay Country RentalsBayBay CountryCountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY OF PASADENA, INC. 410-437-5660 www.baycountryrentalsofpasadena.com 8017 Ft. Smallwood Road Baltimore, Maryland 21226 8017 Ft. Smallwood Rd. Bay Country Rentals of Pasadena, Inc. (Next to 84 Lumber Co.) Bay Country Rentals Bay Country Rentals 410-437-5660 410-437-5660 Terms and Conditions Ready Mixed Concrete Job Too Small? Rental Period We sell as little as 1/4 yard at a time Minimum: Any 4 hour period during business hours, except where a shorter minimum is indicated. Job Too Big? Overnight: Any weekday after 4 p.m. until 8 a.m. the fol- Take only the amount you can handle at one time lowing morning is considered a 4 hour minimum. Day: Any weekday, 24 hours from the time the item is Hard To Get At? rented. Our special trailer can get into that tight spot. Weekend: Friday – after 4 p.m. until 8 a.m. Monday morning is Ready To Pour? considered a 2 day rate. No mixing -- No messing. Saturday – 7:30 opening until 5:30 p.m. is consid- ered 1 day rate. How Much Do I Need? Saturday – noon until 8 a.m. Monday morning is Call for free estimate 1 considered 1 /2 day rate. Just drive in. Haul it away. We provide a self-dumping Saturday – after 4 p.m. until 8 a.m. Monday morning trailer with manually operated dump system 1-2 yard is considered a 1 day rate. capacity.
  • Installation Instructions

    Installation Instructions

    JK Hood Louver Cut Template Parts List Tools Needed (1) JK Hood Louver Panel • Scissors & sharp hobby knife or razor blade (1) Cut Template with Instructions (this sheet) • Masking tape & fine-tip felt marker Cut out template Cut out template (24) 10-24 X 3/4 SS button head cap screw • Automatic center-punch or punch and hammer along outer edge along outer edge (Step 2) (24) 10-24 nylon insert lock nut • Drill motor with 7/32” drill bit, 3/4“ & 1” hole saws (Step 2) (24) #10 flat washer • High speed cut-off wheel (electric or pneumatic) • Anti-sieze compound • 1/8“ hex key (flat-end, NOT ball-end) • 3/8” wrench or socket & ratchet • Files, sandpaper or burr-knife • Touch-up paint At these hole locations: Drill through At these hole locations: Drill through inner brace, then hole-saw nut inner brace, then hole-saw nut access hole from underside access hole from underside (Step 13) (Step 13) Existing Existing Windshield Windshield Bumper Hole Bumper Hole (Step 3) (Step 3) Drill/Hole Saw Locations (Steps 4 & 6) Inside Corner Inside Corner (Step 4 - punch/mark (Step 4 - punch/mark but do not drill) but do not drill) Cut HoodAlong Dotted Lines (Step 8) Poison Spyder Customs www.poisonspyder.com 8. Use a cut-off wheel to cut along the cut lines made in the previous step. DO (951) 849-5911 Installation Procedure NOT CUT INTO the X-brace on the underside of the hood. There is a thin layer of adhesive material between the outer sheetmetal and the X-brace, which will allow you to carefully cut through the outer layer of sheetmetal without cutting in to the X-brace.