DOCSLIB.ORG

Parr Service Clamps, Fixtures, and Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Parr Service Clamps, Fixtures, and Tools Bulletin No. 307 Parr Service Clamps, List of tools for Parr product lines. Fixtures, and Tools Acid Digestion Vessels Part No. Description For Use with Models 264AC2 Hook Spanner Wrench 4744, 4749, & 4749A A285AC Holding Fixture 4744, 4749, & 4749A A263AC Spanner Jack Assembly with 264AC Face Spanner 4746 & 4747 264AC Face Spanner only 4746 & 4747 2583HC Service Fixture 4748 & 4748A Calorimeters Part No. Description For Use with Models 475A Service Clamp Head 1108 Series 568A Service Clamp Head 1110 A536A Service Clamp 1136 & 1138 534A Service Fixture 1107, 1109, 1109A, 1109X 700DD Tool, O-Ring Installation 1271 551A Tool, O-Ring Installation - 1109 110 9 585DD Tool, Pin Extraction All Calorimeters (except 1341) 322HW Tool, Quick Release 6510, 6520A TX03SKMM Metric Hex Wrench .89mm 6100, 6200, 6300, & 6400 TX03SK 1/32 Socket Screw Key 6100, 6200, 6300, & 6400 (pre 2009) 421A Bomb Lifter 1341, 6050, 6100, & 6200 TX14SK 9/64 Socket Screw Key 1281, 6300, & 6400 A38A Head Support Stand 1341, 6100, 6200, 6300, & 6400 A39A Head Support and Stand 1110 1005DD Forceps 6300 & 6400 876DD Cutter, Plastic Tubing 1281, 1271, 6200, 6300, & 6400 356HCW Pliers for Snap Ring 1281, 6050, 6300, & 6400 Tech Note 307 06/03/16 Page 1 Magnetic Drives Part No. Description For Use with Mag Drives 1947HC Bushing (1133HC) Installation Tool A1120HC_, A2140HC_, and A2150HC_ Series 1948HC Bushing (1133HC) Removal Tool A1120HC_, A2140HC_, A2150HC_, and A3040HC Series 1947HC2 Bushing (1133HC) Installation Tool A3040HC_ Series 1950HC Bushing (1166HC) Installation Tool A1180HC and A1750HC Series 1951HC Bushing (1166HC) Removal Tool A1180HC and A1750HC Series 2177HC Bushing (2162HC) Installation Tool A2160HC and A2170HC Series 2178HC Bushing (2162HC) Removal Tool A2160HC and A2170HC Series 2086HC Bearing Installation Tool All Magnetic Drives (manual) (A1120HC/A1180HC/A1750HC) 264AC3 Pin Spanner Wrench, 2” A1180HC, A1750HC, A2160HC and A2170HC Series 264AC4 Pin Spanner Wrench, 1½” A1120HC, A2140HC, A2150HC, and A3040HC Series 264AC5 Face Spanner Wrench, Adj. All Magnetic Drives Reactors Part No. Description For Use with Reactor Series Cylinder O.D. 2583HC Service Fixture 4560 and 5100 Mini Reactors 3.0” 2584HC Service Fixture 4520 and 4530 1 & 2 Liter Reactors 4.5” 2585HC Service Fixture 4540 Reactors 4.5” 2586HC Service Fixture 4571-74 and 4577-78 Reactors 5.5” 2587HC Service Fixture 4550 and 4580 Reactors 6.75” 2588HC Service Fixture 4590 Micro (Screw cap) 2.0” 2588HC2 Service Fixture 4590 Micro (Flat Gasket or O-ring) 2.0” 2897HC Service Fixture 5000 Multiple Reactor System 1.9” (5050 Head or Cylinder) 3001HC Service Fixture 4750 Flat Gasket 1.875” 3002HC2 Service Fixture 4575/76 Flat Gasket 3.75” 3003HC Service Fixture 5000 Multiple Reactor System 1.5” (5051 Head or Cylinder) 2589HC2 Service Fixture 5110 Low Pressure Reactors 4.5” 1368HC Torque Wrench 3/8” drive 1369HC Torque Adapter 3/8” drive x 3/8” hex 1369HC2 Torque Adapter 3/8” drive x 1/2” hex 2403HC Torque Wrench 1/2” drive 150 ft-lb 2403HC2 Torque Wrench 1/2” drive 250 ft-lb 2404HC Torque Adapter 1/2” drive x 5/8” hex 3339HC Torque Adapter 1/2” drive x 3/4” hex 3582HC Torque Adapter 1/4” drive x 3/16” hex 3647HC Torque Adapter 3/8” drive x 7/16” hex 3745HC Torque Adapter 3/8” drive x 7/8” hex Parr Instrument Company 211 53rd Street • Moline, Illinois 61265 USA 1-309-762-7716 • 1-800-872-7720 • Fax: 1-309-762-9453 E-mail: [email protected] • http://www.parrinst.com TechNote 307 06/03/16 Page 2.
Load more

Recommended publications
  • National Warehouse Retailer Tools - MODESTO - July 11Th
    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
    [Show full text]
  • BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP
    2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC.
    [Show full text]
  • Torque Wrench Manual English
    Digital Electronic Torque Wrench Operating Manual Model 60648 This manual will help you to use the many MAINTENANCE AND STORAGE features of your new digital torque wrench. Before operating the torque wrench, please read ATTENTION: this manual completely, and keep it nearby for To maintain accuracy, a one-year future reference. periodic recalibration is recommended. Please contact your local dealer for FEATURES calibration details. CAUTION: ● Interchangeable head 1. Over-torque (110% of Max. torque range) ● Digital torque value readout could cause breakage ● +/- 2% accuracy or loss of accuracy. ● CW and CCW operation 2. Do not shake violently ● Peak hold and track mode selectable or drop wrench. ● Buzzer and LED indicator for the 9 pre-set 3. Do not use the wrench target torques as a hammer. ● Water contact indicator 4. Do not leave the wrench in any place exposed to ● Engineering units (ft-lb, in-lb, N-m, kg-cm) excessive heat, humidity, or direct sunlight. 5. Do not use the wrench in water (not waterproof). selectable 6. If the wrench gets wet, wipe it with a dry towel ● Stores up to 50 data files for recall and joint as soon as possible. The salt in seawater can be torque auditing especially damaging. ● Auto Sleep after about five minutes idle 7. Do not use organic solvents, such as alcohol or ● (2) AAA Batteries included paint thinner when cleaning the wrench. 8. Keep the wrench away from magnets. 9. Do not expose the wrench to dust or sand as this could cause serious damage. 10. Do not apply excessive force to the LCD panel.
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • United Rentals Tool Solutions Catalog
    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
    [Show full text]
  • Bay Country Rentalsbaybay Countrycountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY
    BayBay CountryCountry RentalsBay Country RentalsBayBay CountryCountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY OF PASADENA, INC. 410-437-5660 www.baycountryrentalsofpasadena.com 8017 Ft. Smallwood Road Baltimore, Maryland 21226 8017 Ft. Smallwood Rd. Bay Country Rentals of Pasadena, Inc. (Next to 84 Lumber Co.) Bay Country Rentals Bay Country Rentals 410-437-5660 410-437-5660 Terms and Conditions Ready Mixed Concrete Job Too Small? Rental Period We sell as little as 1/4 yard at a time Minimum: Any 4 hour period during business hours, except where a shorter minimum is indicated. Job Too Big? Overnight: Any weekday after 4 p.m. until 8 a.m. the fol- Take only the amount you can handle at one time lowing morning is considered a 4 hour minimum. Day: Any weekday, 24 hours from the time the item is Hard To Get At? rented. Our special trailer can get into that tight spot. Weekend: Friday – after 4 p.m. until 8 a.m. Monday morning is Ready To Pour? considered a 2 day rate. No mixing -- No messing. Saturday – 7:30 opening until 5:30 p.m. is consid- ered 1 day rate. How Much Do I Need? Saturday – noon until 8 a.m. Monday morning is Call for free estimate 1 considered 1 /2 day rate. Just drive in. Haul it away. We provide a self-dumping Saturday – after 4 p.m. until 8 a.m. Monday morning trailer with manually operated dump system 1-2 yard is considered a 1 day rate. capacity.
    [Show full text]
  • Tools and Their Uses NAVEDTRA 14256
    NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
    [Show full text]
  • Torque TECHWRENCH™ Torque Wrenches TECHWRENCH™ Memory Torque
    Torque Range Torque Range What You Need To Know About Accuracy... For All Mechanical Click-Type Wrenches. Micrometer adjustable Measuring & Testing The ANSI Standard allows 4% of reading error between 20% and 100% of wrench capacity. Firm click Below 20% ANSI allows an error in reading TORQUE equal to 0.8% of wrench capacity. What Does This Mean To You? Robust housing nap-on® gives you more ways to turn more fasteners than anyone else, and most importantly, we give Using a wrench at 5% of its full scale may Syou all the options you need to tighten them correctly. Snap-on® gives you the advantage of the largest result in up to 16% error in reading. How can High strength sealed ratchet selection of torque tools, so whether you are looking for torque screwdrivers or full featured calibration you be sure you are anywhere near the fastener systems, we have the products in the styles and the ranges you need. torque specification? QD Series Torque Wrenches • Adjustable, preset and interchangeable head models These are the products that have earned their reputation in the real world where it matters most Use Caution When Buying Torque Wrenches • Accurate to within 4% clockwise and 6% counterclockwise – in the factories and shops, in the field and in the laboratories. They are products trusted to build jet Rated Below 20% of Full Scale. engines and farm tractors, spacecraft and machine tools, nuclear reactors and automobiles. Wherever Torque wrenches that are scaled below 20% of rotating assemblies or high stresses occur, that’s where you’ll find the world’s finest torque products.
    [Show full text]
  • Ergonomic Hand Tools Computorq3 Electronic
    SALES BLASTER NEW! RATCHETING COMBINATION WRENCHES Ratcheting gear minimizes swing arc in tight places See Page 6 IMPACT WRENCHES High power to weight ratio, fast rundown and no torque reaction to operator See Page 10 COMPUTORQ3 ERGONOMIC HAND TOOLS ELECTRONIC TORQUE WRENCH We use a scientific approach to Simple to use. Sleek new design. develop ergonomic hand tools See Pages 8 - 9 See Page 2 OFFER VALID WHILE SUPPLIES LAST APRIL 1, 2018 TO JULY 31, 2018 Trust CDI's Factory Service Center for all your CDI torque product repair and calibration work. www.cdifactoryservice.com COMPUTORQ 3 ELECTRONIC TORQUE WRENCHES HEAVY-DUTY TORQUE & ANGLETM TORQUE WRENCH LEADING THE WAY IN HEAVY-DUTY TORQUE AND ANGLE APPLICATIONS WITH The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench INNOVATIVE SOLUTIONS THAT MAKE A DIFFERENCE IN DOING THE JOB RIGHT. that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. The CDI 600 ft.lb. Heavy-Duty Torque & AngleTM Torque Wrench eliminates the need for Simply set the desired torque value and apply force until the green LED illuminates. Great for angle gauges and protractors, providing the most accurate and efficient way to achieve torque light industrial, automotive, motorcycle, watercraft and aircraft applications. plus angle tightening sequences now specified by many manufacturers. The digital readout displays a torque setting then with a push of a button, switches to the angle mode. Angle readout Product Code Description List Price: Sale Price: not affected by ratcheting. Angle calculation based on the same gyroscopic technology that 2401CI3 1/4" Drive 24-240 ft.
    [Show full text]
  • Hydraulic Torque Wrenches
    TECHNICAL SPECIFICATION Hydraulic Torque Wrenches Stork’s extensive range of subsea joint integrity and hydraulic tools offer quality products that deliver efficient and safe subsea operations. The Hydraulic Torque Wrenches are a hands free disengagement system, which are produced from a new A/Q aluminium alloy. This makes the Hydraulic Torque Wrenches the best low clearance tool ever designed. Features: • Models from 255 ft-lbs to 31,800 ft-lbs • Link hex size from 3/4” up to 6 1/2” • Heavy duty one way ratchet system • 360° x 180° rapid-swivel • Bronze friction bearing sleeve • Output accuracy certified at +/- 3% • Quick-connect ratchet link • CE approved • Enerpac torque wrenches were designed using state-of- the art CAD techniques to bring you the most advanced low profile hexagon torque wrench on the market • Rigid steel design – durabilty, reliabilty and safety • No tools needed for changing hexagon heads • Versatility: one hydraulic drive unit per torque capacity can be used to drive any hexagon head within that range • 360 degree swivel manifold with screw lock couplers • Optional interchangeable metric and imperial hexagon heads and reducer inserts • Tested and certified according to ATEX • Includes handle to improve tool handling and safety Benefits: • Innovative, pinless wrench construction with quick release drive and automatic crank engagement • Fast operation due to the large nut rotation per wrench cycle (30 degree) and rapid return stroke, double-acting • Constant torque output provides high accuracy (± 3%) across the full stroke STORK www.stork.com Drive Optional Maximum Unit Hexagon Torque* Drive Unit Weight Heads at 700 bar Model ** Number mm inch nm ft.lbs kg 30 - 60 1 1/8 - 2 3/8 2712 2000 W2000 1,4 36 - 85 1 5/16 - 3 1/8 5423 4000 W4000 2,0 50 - 105 1 7/8 - 3 7/8 10.846 8000 W8000 3,0 65 - 115 2 7/16 - 4 5/8 20.337 15.000 W15000 4,9 75 - 135 2 15/16 - 5 3/8 30.510 22.500 W22000 7,7 80 - 155 3 1/8 - 6 1/8 47.453 35.000 W35000 11,4 * Determine maximum torque according to the bolt (nut) size and grade.
    [Show full text]
  • MJ Cast Iron Fasteners
    MJ Cast Iron Fasteners For torquing both screws simultaneously. The Twin Tite" attaches to most%" reversible cordless drills. Fits couplings 1W' to 4 ". Individual torque settings allow each clamp screw to be tightened to correct torque specification. The torque is preset to 60in lbs. or 80in lbs. and can be recalibrated with a torque wrench. The Twin nte" is quick and easy to attach to your drill and the wire form can be bent to fit other drills. 1990 TwinTite'" 60in/lb. with 51,J' replacement socket ..................................... 2.5 lbs. (1.2kg) 1992 TwinTite'" 80in/lb. with 5/,s' replacement socket ..................................... 2.5 lbs. (1.2kg) 1994 TwinTite'" 80in/lb. with 3/," replacement socket... ................................... 2.5 lbs. (1.2kg) Attachment procedure is 3 simple steps: 1. Place gear box shaft in drill chuck and tighten 2. Place wire form around drill handle and wire ends into clamp holes on bottom of gear box and tighten screws. 3. Assemble 2-piece clamp around wire form near drill handle base and tighten the screws. This durable "T-Handle" type torque tool with a contoured comfort-fit handle features a removable socket and a unique locking collar, which allows the tool to be used as an untorqued snug-up or back-off, as well as a conventional torque tool. With the locking collar retracted, the tool torques to the right (tightening), while ratcheting to the left. When proper torque value has been achieved, the mechanism slips internally and over- tightening is impossible. 1977 T-Torque for tightening 5/,s" coupling nuts to 60 in.
    [Show full text]