National Warehouse Retailer Tools - MODESTO - July 11Th
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Air Staple Gun 13-32Mm Capacity
INSTRUCTIONS FOR: AIR STAPLE GUN 13-32MM CAPACITY MODEL NO: SA789.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY Refer to Wear ear Wear eye Wear instruction protection protection protective manual gloves WARNING! DO NOT use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent. WARNING! Never engage in horseplay with the tool. WARNING! Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces metal filings or wood chips. WARNING! Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. WARNING! Keep hands, face, feet and all parts of the body away from the firing head at all times. DO NOT use the nail gun for a task it is not designed to perform. DO NOT operate the nail gun near flammable substances or flammable containers. DO NOT use the nail gun unless you have been instructed in its use by a qualified person. DO NOT carry the nail gun by the air hose, or pull the hose from the air supply. -
NARROW GAUGE on a Shelf BUILD the STREAMLINED "TRAIN of TOMMOROW" a FREIGHT ~4~ STATION, "
Fall 1979 NARROW GAUGE ON A SHELf BUILD THE STREAMLINED "TRAIN OF TOMMOROW" A FREIGHT ~4~ STATION, " . ,~. :",,,,,, STEP·BY ·STEP "----_iII_!MODEL Fall 1979 Vol. 1~, No. 1. RAILROADING / Publishers Nick Siegel 4 NARROW GAUGE ON THE FRONT RANGE Sal Pizzoferrato Colorado's mountain railroads on a two-foot shelf Executive Editor: Robert Schleicher 10 A FREIGHT HOUSE (AND TWO "FREEBIES") IN HO SCALE Associate Editors: Bill Wright How to make the common kits into something special Albin Burroughs 16 STEAM POWER ON THE TONAPAH Charles Heperrle Railroads designed with the modeler in mind Managing Editor: Joe K. LeFort 20 DOUBLE-POWER DIESELS Art Director: Michael Minnix Top-notch power from Tyco's "toy" locomotives Assistant Art Director: Cricket Smith 32 THE TRAIN OF TOMORROW A snap-together model of an incredible train Production Editor: Vickie Petersen 38 BUILD A DOME-OBSERVATION CAR Typography: Type-Tronics, Inc. How-to build a fitting end to a streamliner 46 SIMPLE STRIPING FOR CARS & LOCOMOTIVES Model Railroading is published four-times a Two-color paint schemes and decaJ stripes the easy way year by Eastwood Publishing Company, 2901 50 TRACKPLAN: THE ROMFORD & JOLIET RAILROAD Blake St., Denver, CO 80205. Price per single Real railroading operation in just 4x8 feet copy is $2.50, $3.00 in Ca nada. SubSCri ptions are $9.00 in the U.S. or Canada. Unsoljcited 52 CONTAINER CARS man uscripts or photogra phs should be Some authentic pieces of rolling stock from the steam era accompanied by return postage and 58 KIT-CONVERSION: BUILD TWO CONTAINER CARS Eastwood Publishing Company assumes no Usin g kits and ready-builts to make one-off replicas responsibility for the loss or damage of such material. -
TOOLS and EQUIPMENT Orthotic 561
TOOLS AND EQUIPMENT Orthotic 561 Tools Shoe Stretchers............................562 Brannock Measuring Device..................562 Mixing Bowls ..............................562 Aluminum Cast Mandrels ....................562 Laminating Fixtures.........................563 Vises and Yates Clamps.................563-564 Measuring Devices .....................564-567 Hex Sets and Balldrivers.................567-569 Screw and Drill Gages ......................569 Cutting Nippers ............................570 Plastering Tools............................571 Shears and Scissors ....................571-572 Blades, Knives and Surforms .............572-575 Rivets, Punch Sets and Eyelets ...........576-579 Reamers .................................579 Needle Kit ................................579 Deburring Tool.............................579 Rout-A-Burr ...............................579 Precision Oiler.............................580 Countersinks ..............................580 Adjustable Bits.............................580 Tools Ball Set Tool . 580 Micro Torches and Heat Guns ............580-582 Cast Spreaders and Cutters ..............583-584 Alignment Fixtures .........................584 Benders and Contouring Iron .............584-585 Equipment Carvers, Cutters and Routers.............585-588 Sanding Accessories............ 589-591, 601-603 Sewing and Patching Machines ...............592 Drill Press ................................593 Band Saws . .594-595 Dust Collectors ........................596-597 -
Carpentry Tool List 2018-2019
Carpentry Tool List 2021-2022 PLEASE NOTE: This Tool list/ pricing is subject to change. Students are encouraged to check with their instructor during the summer months to see if the tool list has been updated. Below are the contacts for the freshmen instructors: Dan Noel: [email protected] Timothy Draper: [email protected] Tool Description /suggested brands (Brand not mandatory) Estimated Cost ($) 1. Calculator/ Construction Master 39.00 2. 16oz Plumb Bob/ Swanson 12.60 3. 12” Combination Square/ Swanson 9.98 4. Framing Square/ high visibility / Johnson (*must have a rafter table on it*) 9.36 5. 30 foot retractable tape measure / Stanley 25.47 6. 100 foot steel tape / Stanley 26.72 7. Sliding T-bevel/ Johnson 9.84 8. Chalk Line/ Stanley FatMax 100’ line w/ red or blue chalk 12.98 9. Dry Line #18 x 250’ 12.98 10. Crosscut Handsaw (suggested 12 point, 20” long)/ Stanley or Irwin 23.52 11. Drywall Saw/ Stanley Jab Saw 12.31 12. 12 inch Steel Spackling Mud Pan/ Wal-board 13.98 13. Drywall Knives/ Wal-board/ 4” ($8.95), 6” ($9.50) 8” ( $10.00) & 10” ($11.50) 38.00 14. 10 ounce Caulk Gun/ Workforce 13.97 15. 3 Piece Nail Set/ DeWalt 8.97 16. ½” Countersink or rosebud bit 5.00 17. Pencil Compass/ Scriber/ General Tool 843/1 3.00 18. 10” Cat’s Paw (nail puller) Bostitch 12.98 19. 15” Wonder Bar/ Flat Bar/ Vaughan 12.98 20. Utility Knife (with retractable blade)/ Stanley 3.98 21. Coping Saw w/replacement blades/ Irwin 5.98 22. -
USG Fiberock® Underlayment and Tile Backerboard Installation Guide
TM TM Underlayment and Tile Backerboard Installation Guide Interior Floors, Walls and Countertops USG Fiberock® Brand Underlayment and Tile Backerboard USG Fiberock® Brand underlayment and tile backerboard are all purpose substrates engineered to meet floor underlayment and wall tile-backing needs throughout a home. Under resilient flooring, USG Fiberock underlayment provides a hard surface that’s smooth and flat with no bumps or ridges to show through or affect finished floor covering. Behind and under tile or natural stone, USG Fiberock tile backerboard provides the resistance to water and mold that is required in bathrooms, kitchens and entryways. With USG Fiberock panels, you can rely on a single family of products to back all types of tile and resilient flooring in the home. Integral Water Resistance Proven Performance This remarkable family of USG Fiberock panels are products is completely warranted for 20 years. different from other They have been tested by substrates. Manufactured the Tile Council of North with a unique, proprietary America (TCNA), using the technology, USG Fiberock Robinson Floor Method, and panels feature a durable, are approved for residential water-resistant composition and light commercial use (as that eliminates the defined by TCNA). swelling and warping often experienced with fiber Environmentally Friendly cement, plywood, oriented USG Fiberock panels are made strand board (OSB), lauan from 95 percent recycled and other wood-based material. In recognition of the underlayments. environmentally sound alternative these panels Easy to Install provide, United States Gypsum USG Fiberock panels score Company earned the Green easily and snap with minimal Cross certificate from Scientific effort. -
ET0001 Ryobi Cordless String Trimmer
ET Tool Image Number Ryobi Cordless String Trimmer ET0001 (Includes battery and charger) Ryobi Cordless Cultivator ET0002 (Includes battery and charger) Dremel Rotary Tool Kit (8220) (Includes 30 ET0003 accessories, battery, charger & carrying case) Ryobi Driving ET0004 Kit (68-piece) Page 1 ET Tool Image Number Ryobi Wood ET0005 Drilling Kit (11- piece) Ryobi Impact ET0006 Driving Kit (26- piece) Ryobi Black ET0007 Oxide Drill Kit (21-piece_ Electrician's Tool Set (22- ET0008 piece, includes bag) Page 2 ET Tool Image Number Steel Single ET0009 Painter's Pole (5 ft) Wood Extension Pole ET0010 with Metal Tip (4 ft) Light Bulb Changer Kit ET0011 with Attachments (11 ft) ET0012 Torch Kit Page 3 ET Tool Image Number ITEM NO ITEM NO LONGER ET0013 LONGER AVAILABLE AVAILABLE P3 Kill A Watt EZ ET0014 Electricity Usage Monitor P3 Kill A Watt EZ ET0015 Electricity Usage Monitor P3 Kill A Watt EZ ET0016 Electricity Usage Monitor Page 4 ET Tool Image Number Ryobi One+ 18V 4 1/2 in. Angle Grinder ET0017 (Includes bag, battery and charger) Ryobi One+ 18V Compact Drill/Driver Kit ET0018 (Includes bag, battery and charger) ITEM NO ITEM NO LONGER ET0019 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V Orbital Jigsaw (Includes bag, ET0020 battery, charger and 1 blade) Page 5 ET Tool Image Number Ryobi One+ 18V Belt Sander (Includes bag, ET0021 battery, charger and dust bag) Ryobi One+ 18V Drain Auger ET0022 (Includes bag, battery and charger) Ryobi One+ 18V Base with Multi- tool ET0023 Attachments (Includes bag, battery and charger) Ryobi One+ 18V Impact Driver ET0024 (Includes bag, battery and charger) Page 6 ET Tool Image Number ITEM NO ITEM NO LONGER ET0025 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V 6-1/2 in. -
BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP
2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC. -
Industrial & Power Tools
Industrial Supplies Ask Us About FREE Delivery & Trade Accounts Product # Item Description Notes Wall tiles 100007 DYNASTY CLASSIC GLOSS WHITE 100X300 63315 Industrial & Power Tools www.hg.com.au Hardware & General | Industrial Supplies 1 Industrial & Power Tools Ask Us About FREE Delivery & Trade Accounts Just a small selection of our range, If you can’t find what you need - give us a call. A M Angle Grinders ................................................................... 16 Measuring Tools ................................................................. 11 Multi Tools ............................................................................ 18 B Batteries & Chargers ....................................................... 14 N Battery Caulking Guns ................................................... 15 Nail Guns .............................................................................. 15 Bolts , Nuts & Washers..................................................... 5 O C Other Power Tools & Accessories ............................. 18 Collated Nails ....................................................................... 3 Cutting Blades/Disks ........................................................ 8 P Planers ................................................................................... 16 D Power Saws ......................................................................... 17 Demolition Hammers & Chisels ................................. 14 Power Tool Kits ................................................................. -
Torque Wrench Manual English
Digital Electronic Torque Wrench Operating Manual Model 60648 This manual will help you to use the many MAINTENANCE AND STORAGE features of your new digital torque wrench. Before operating the torque wrench, please read ATTENTION: this manual completely, and keep it nearby for To maintain accuracy, a one-year future reference. periodic recalibration is recommended. Please contact your local dealer for FEATURES calibration details. CAUTION: ● Interchangeable head 1. Over-torque (110% of Max. torque range) ● Digital torque value readout could cause breakage ● +/- 2% accuracy or loss of accuracy. ● CW and CCW operation 2. Do not shake violently ● Peak hold and track mode selectable or drop wrench. ● Buzzer and LED indicator for the 9 pre-set 3. Do not use the wrench target torques as a hammer. ● Water contact indicator 4. Do not leave the wrench in any place exposed to ● Engineering units (ft-lb, in-lb, N-m, kg-cm) excessive heat, humidity, or direct sunlight. 5. Do not use the wrench in water (not waterproof). selectable 6. If the wrench gets wet, wipe it with a dry towel ● Stores up to 50 data files for recall and joint as soon as possible. The salt in seawater can be torque auditing especially damaging. ● Auto Sleep after about five minutes idle 7. Do not use organic solvents, such as alcohol or ● (2) AAA Batteries included paint thinner when cleaning the wrench. 8. Keep the wrench away from magnets. 9. Do not expose the wrench to dust or sand as this could cause serious damage. 10. Do not apply excessive force to the LCD panel. -
05/29/18 Tools & Home Improvement Auction
09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D. -
Download the Penn Tool Product Guide!
Product Guide Quality Products • Superior Service • Competitive Pricing Penn Tool Sales & Service, Inc. • Abrasives • Tool Trailers • Air & Hydraulic Equipment Designed and Built to Your • Cutting Tools - All Makes & Models Specifications • Motorola Radios Supplied & Manned for Your • Safety Equipment & Supplies Outages or Turnarounds • Shipping to Any Location • Welding Supplies Youngstown, OH Lancaster, PA Ann Arbor, MI Cincinnati, OH 625 Bev Road 912 Links Avenue 1900 Highland Drive 2631 Crescentville Road Youngstown,OH 44512 Landisville, PA 17538 Ann Arbor, MI 48108 Sharonville, OH 45241 Phone 800-321-4010 Phone 800-258-9505 Phone 800-848-5577 Phone 800-842-3325 330-758-0845 717-898-3197 734-973-0004 513-772-8982 Fax 330-758-6028 Fax 717-898-9347 Fax 734-973-3220 Fax 513-772-8044 Chicago, IL St. Louis, MO Atlanta, GA Winston Salem, NC 9623 West 194th Street 9500-D Collinsville Road 3380 Town Point Drive 2431 Spaugh Industrial Dr Mokena, IL 60448 Collinsville, IL 62234 Kennesaw, GA 30144 Winston Salem, NC 27103 Phone 888-834-7616 Phone 800-786-2063 Phone 866-289-8917 Phone 800-958-5915 708-478-1254 618-343-0460 678-581-0020 336-774-2370 Fax 708-478-1355 Fax 618-343-0461 Fax 678-581-2828 Fax 336-774-2374 Houston, TX Riverside, MO Lexington, SC 16920 N. Texas Avenue 601 NW Business Park Ln 377 Riverchase Way Unit B Webster, TX 77598 Riverside ,Mo 64150 Lexington, SC. 29072 Phone 877-290-4294 Phone 855-855-3820 Phone 855-222-0292 281-316-6918 816-741-1010 803-794-0900 Fax 281-316-6963 Fax 816-741-1019 Fax 803-739-6940 www.penntoolsalesandservice.com -
1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.