DOCSLIB.ORG

Ryflor™ Chemical Compatibility List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ryflor™ Chemical Compatibility List Chemical Compatibility List The following information is based on known chemical compatibility data for RyFlor™, and should only be considered as reference. Further laboratory tests may be required to verify the compatibility of a particular chemical with expanded RyFlor™ products. Chemicals Compatible with RyFlor™ Acetaldehyde Barium Sulfide Cetane (Hexadecane) Acetamide Beer Chloric Acid Acetic Acid Benzaldehyde Chlorinated Water Acetic Anhydride Benzene Chlorine Acetone Benzoic Acid Chlorine Dioxide Acetophenone Benzonitrile Chloroacetic Acid Acetylene Benzyl Alcohol Chlorobenzene Acrylic Anhydride Benzyl Chloride Chloroethylene Adipic Acid Black Liquor (Sulfate Chloroform Allyl Acetate Liquor) Chlorosulfonic Acid Allyl Alcohol Borax Chromic Acid Allyl Chloride Boric Acid Chromic Anhydride Aluminum Chloride Brine Citric Acid Aluminum Flouride Bromine Copper Acetate Aluminum Hydroxide Butadiene Copper Chloride Aluminum Nitrate Butane Copper Fluoride Aluminum Potassium Butyl Acetate Copper Sulfate Sulfate (Alum) Butyl Alcohol (Butanol) Cottonseed Oil Aluminum Sulfate Butyl Amine Creosote Ammonia Butyl Chloride Cresols (Cresylic Acid) Ammonium Carbonate Butyl Ether Crude Oil Ammonium Chloride Butyl Phthalate Cyanic Acid Ammonium Fluoride Butyl Methacrylate Cyclohexane Ammonium Hydroxide Butylene Cyclohexanol Ammonium Nitrate Butyric Acid Cyclohexanone Ammonium Phosphate Calcium Bisulfite Dibutyl Phthalate Ammonium Sulfate Calcium Chloride Dichlorobenzen Amyl Acetate Calcium Hydroxide Dichloroethane Amyl Alcohol Calcium Hypochlorite Dichloroethylene Amyl Chloride Calcium Nitrate Diesel Fuel Aniline Calcium Sulfate Diethylene Glycol Aqua Regia Carbolic Acid (Phenol) Diethyl Ether Arsenic Acid Carbon Dioxide Dimethyl Aniline Asphalt Carbon Disulfide Dimethyl Ether Barium Chloride Carbon Monoxide Dimethyl Formamide Barium Cyanide Carbon Tetrachloride Dipropylene Glycol Barium Hydroxide Carbonic Acid Dioxane www.hitechseals.com Dow Therm Hydrofluosilicic Acid Nitrobenzene Ethane Hydrogen Nitrocalcite (Calcium Nitrate) Ethanolamine Hydrogen Chloride Nitrogen Ethers Hydrogen Fluoride Nitrogen Tetroxide Ethyl Acetate (Acetic Hydrogen Peroxide Nitromethane Ester) Hydrogen Sulfide Nitrous Acid Ethyl Alcohol (Ethanol) Hypochlorous Acid Nitrous Oxide Ethyl Benzene Iodine Octane Ethyl Chloride Isobutane Oleic Acid Ethyl Ether Isobutyl Alcohol Oxalic Acid Ethyl Hexoate Isopropyl Acetate Oxygen Ethyl Sulfate Isopropyl Alcohol Ozone Ethylene Isopropyl Ether Palmitic Acid Ethylene Bromide Kerosene Pentane Ethylene Chloride Lactic Acid Perchloric Acid Ethylene Glycol Lead Acetate Perchloroethylene (Dihydroxyethane) Lime (Calium Oxide) Perfluoroxylene Ethylene Oxide Linseed Oil Petroleum Oil Ferric Chloride Lubricating Oil Petroleum Benzene Ferric Phosphate Lye Petroleum Ether Ferrous Chloride Magnesium Chloride Phenol Ferrous Sulfate Magnesium Hydroxide Phosphoric Acid Formaldehyde (Formalin) Magnesium Sulfate Phosphorus Pentachloride Formic Acid Mercury Phosphorus Trichloride Freon Methane Phthalic Acid Fuel Oil Methyl Acetate Picric Acid Furan Methyl Acetone Pinene Furfural (Furfuraldehyde) Methyl Alcohol (Methanol) Piperidene Glycerine (Glycerol) Methylacrylic Acid Potash (Potassium Carbonate) Glycol (Ethylene Glycol) Methyl Amine Potassium Acetate Glycolic Acid Methyl Bromide Potassium Bichromate Green Liquor (Sulfate Methyl Chloride Potassium Bromide Liquor) Methyl Ethyl Ketone Potassium Chlorate Heptane Methylene Chloride Potassium Chloride Hexachloroethane Mineral Oil Potassium Chromate Hexane Monochloroethane Potassium Cyanide Hexamine Naphtha Potassium Dichromate Hydraulic Fluid Naphthalene Potassium Hydrate Hydrazine Naphthols Potassium Hydroxide (Caustic Potash) Hydrobromic Acid Natural Gas Potassium Hypochlorite Hydrochloric Acid Nickel Chloride Potassium Iodide Hydrocyanic Acid Nickel Nitrate Potassium Nitrate Hydrofluoric Acid Nickel Sulfate Potassium Permanganate Hydrofluorosilicic Acid Nitric Acid Potassium Sulfate www.hitechseals.com Producer Gas Sodium Fluoride Tetrachloroethylene Propane Sodium Hydroxide (Caustic Soda) Toluene (Toluol) Propyl Acetate Sodium Hypochlorite Tributyl Phosphate Propyl Alcohol (Propanol) Sodium Metaphosphate Trichloroacetic Acid Propylene Sodium Metasilicate Trichloroethane Propylene Glycol Sodium Nitrate Trichloroethylene Propyl Nitrate Sodium Perborate Trichloromonofluoroethane Pydraul Sodium Peroxide Trichloropropane Pyridine Sodium Phosphate Tricresyl Phosphate Salicylic Acid Sodium Silicate (Water Glass) Triethanolamine Sea Water Sodium Sulfate Triethylamine Silicone Oil Sodium Sulfide Turpentine Silver Bromide Sodium Thiosulfate Urea Silver Chloride Stannous Chloride Varnish Silver Nitrate Starch Vinegar Soap Steam Vinyl Acetate Soda Ash (Sodium Carbonate) Stearic Acid Vinyl Chloride Sodium Acetate Styrene Water, Acid Mine Sodium Acid Sulfate Sulfate Liquor, Black Water, Boiler Feed Sodium Aluminate Sulfate Liquor, Green Whiskey Sodium Aluminum Sulfate Sulfur Chloride White Liquor, Pulp Mill Sodium Bicarbonate Sulfur Dioxide White Spirit (Baking Soda) Sulfur Trioxide Wine Sodium Bisulfate Sulfuric Acid Xylenes (Xylol Xylole) Sodium Bromide Sulfurous Acid Zinc Chloride Sodium Chloride Tannic Acid Zinc Nitrate Sodium Chromate Tartaric Acid Zinc Sulfate Sodium Cyanide Tetrabromoethane Sodium Dioxide Tetrachloroethane Chemicals Not Compatible with RyFlor™ Bromine Trifluoride Chlorine Trifluoride Oxygen Difluoride Fluorine Molten Alkali Metals www.hitechseals.com.
Load more

Recommended publications
  • Evaluating the Acute and Chronic Toxicity of Potassium Carbonate and the Interactive Effects Between Sodium and Potassium on Rainbow Trout (Oncorhynchus Mykiss)
    University of New Hampshire University of New Hampshire Scholars' Repository Master's Theses and Capstones Student Scholarship Fall 2020 Evaluating the acute and chronic toxicity of potassium carbonate and the interactive effects between sodium and potassium on rainbow trout (Oncorhynchus mykiss) Ashutosh Rao University of New Hampshire, Durham Follow this and additional works at: https://scholars.unh.edu/thesis Recommended Citation Rao, Ashutosh, "Evaluating the acute and chronic toxicity of potassium carbonate and the interactive effects between sodium and potassium on rainbow trout (Oncorhynchus mykiss)" (2020). Master's Theses and Capstones. 1395. https://scholars.unh.edu/thesis/1395 This Thesis is brought to you for free and open access by the Student Scholarship at University of New Hampshire Scholars' Repository. It has been accepted for inclusion in Master's Theses and Capstones by an authorized administrator of University of New Hampshire Scholars' Repository. For more information, please contact [email protected]. Evaluating the acute and chronic toxicity of potassium carbonate and the interactive effects between sodium and potassium on rainbow trout (Oncorhynchus mykiss) By Ashutosh Rao BS in Marine, Freshwater, & Estuarine Biology, University of New Hampshire, 2017 THESIS Submitted to the University of New Hampshire in Partial Fulfillment of the Requirements for the Degree of Master of Science in Biological Sciences: Marine Biology September 2020 i This thesis was examined and approved in partial fulfillment of the requirements for the degree of Master’s in Biological Sciences: Marine Biology by: Thesis/Dissertation Director, Dr. Elizabeth Fairchild, Research Associate Professor in Biological Sciences, University of New Hampshire Dr. Todd Guerdat, Assistant Professor of Agricultural Engineering, University of New Hampshire Dr.
    [Show full text]
  • Research Module: Scheme 2A. N-Benzylation Using Benzyl Bromide 63
    Research Module: Scheme 2A. N-Benzylation Using Benzyl Bromide 63 O Scheme 2 Option O Methanol Solvent NH N-Benzylation + Br NH2 N via Alkyl Halide 1 K2CO3 Workup NH 8 R1 R1 (0.139g/mmol) 6a-e Synthesis of 3a-e Benzyl Bromide N-Benzyl 171 g/mol N-Benzyl 1.438 g/ml Pyrazolidinone Pyrazolidinones 119 ml/mol Scheme 2 Part A: Redissolve in Methanol 1. Turn hot plate to 5. 2. To the flask with your product 3 from Scheme 1, attach a condener with gentle water flow. 3. Add 15 mL of methanol. • For 4-methoxy compoud 3c, you may need to add 20 mL of methanol, since the 4-methoxy substrates is probably less soluble. 4. Heat the mixture on the hot plate with the stirrer at 6 until the material dissolves and becomes completely homogeneous. Once it’s dissolved, reduce the hot plate setting to 4. • If the stir bar isn’t coming free even after several minutes, you may wish to detach the condenser and poke the stir-bar free with a spatula • Make sure that there aren’t chunks or blobs of undissolved material on the outside. Everything needs to be dissolved. 5. Calculate 0.9 equivalents of benzyl bromide. Calculate how many mL of benzyl bromide (119 mL/mol) you need to add 0.90 mmol benzyl bromide per mmol of 3. In other words, if you have 20.0 mmol of 3c, how many mL of benzaldehyde will it take to provide 18.0 mmol? • You need to know how many mmol of reactant 3 you are working with.
    [Show full text]
  • Safety Data Sheet - Patina Gel Revision 11/14/2016
    Safety Data Sheet - Patina Gel Revision 11/14/2016 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Patina Gel / Sulfurated Potash 39365-88-3 CAS #: 39365-88-3 Manufacturer: Cool Tools 945 N. Parkway St Jefferson, WI 53549 Telephone: 888-478-5060 Fax: 262-546-5275 Emergency Phone #: Chemtrec USA & Canada 800-424-9300 International 703-527-38 2. HAZARDS IDENTIFICATION GHSClassification Acute Toxicity, Oral (Category 3) Skin Irritation (Category 2) Serious Eye Irritation (Category 2) GH3 Label elements, including precautionary statements Signal Word: Warning Hazard statement(s) H303 May be harmful if swallowed. H315 Causes skin irritation. H320 Causes eye irritation. Precautionary statement(s) P264 Wash hands, face and clothing after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well ventilated area. P280 Wear protective gloves/clothing/eye protection P305 & P351 If in eyes, rinse cautiously with water for several minutes. P338 Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a poison center/doctor if you feel unwell. HMIS Classification NFPA Classification Health hazard: 2 Health hazard: 2 Contact: 1 Reactivity: 0 Flammability 0 Flammability: 0 Physical hazards: 2 Personal B Distributed by: Cool Tools 945 N Parkway St Jefferson, WI 53549 3. COMPOSITION/INFORMATION ON INGREDIENTS Synonyms: Liver of Sulfur, Sulfurated potassa, hepar sulfuris Potassium Trisulfide CAS No. 37488-75-8: 6.25% Potassium Thiosulfate Hydrated CAS No. 10294-66-3: 18.75% Glycerin CAS No. 56-81-5: 75% 4. FIRST AID MEASURES Inhalation: Not likely to occur except as a mist.
    [Show full text]
  • Spe-128 the Catalysis of Potassium Carbonate Solutions in Carbon Dioxide Absorption
    SPE-128 THE CATALYSIS OF POTASSIUM CARBONATE SOLUTIONS IN CARBON DIOXIDE ABSORPTION By A. G. Eickmeyer, Chemical Engineering Consultant Prairie Village, Kansas ABS~:RACT bing. The activity o£ hot potassium car­ THEORY AND DEPINITIONS Downloaded from http://onepetro.org/speatce/proceedings-pdf/61fm/all-61fm/spe-128-ms/2087284/spe-128-ms.pdf by guest on 01 October 2021 bonate solutions has been £ound to be a function of contaminants, having a de­ The absorption of an acid gas in leterious effect, and catalysts, which any alkaline solution is classed as activate the solution. A small amount chemi-sorption, that is, absorption ll of "Catacarb catalyst cancels the e£­ accompanied by chemical reaction. The £ect o£ contamination and larger amounts rate o£ chemical reaction determines give a much more active solution than the size of the towers required by the pure potassium carbonate. In commercial process. plant tests in existing carbonate Unlike caustic, a carbonate solu­ plants, the Catacarb Process resulted tion has very few hydroxyl ions to re­ in increased capacity, reduced steam act directly with CO , Therefore, it usaze, and less residual CO , In 2 2 is believed that CO2 must £irst become new plant construction, ~ ss equipment ·hydrated, or react with water to £orm and utility requirements o£ the Catacarb carbonic acid, which in turn reacts Process permit savings in capital in­ with a carbonate ion to form two bi­ vestment and operating costs. carbonate ions. INTRODUC '1'1 ON (1) CO2 • H2 0 = H2 CO 3 The hot potassium carbonate £r~cess, developed by the Bureau o£ Mines, ,-, has been applied extensively in recent years to CO 2 removal in the puri£ica­ Con£irmation o£ the reaction with tion of hydrogen and natural Gas.
    [Show full text]
  • Possible Hazards for CHEM-101 Introduction to Chemistry
    Possible Hazards for CHEM-101 Introduction to Chemistry This list of substances represents the possible hazards currently identified for this course; however, substitutions or additions are possible. Do not assume a substance is safe if it is not listed. You will be notified of changes as soon as they are available. If you are aware of any known allergies or sensitivities to chemicals, please let your professor know prior to the first lab class. Gold Metal 6M Sodium Hydroxide Granular Zinc 0.1 M Barium Chloride Hardness Test Tablets 0.1 M Barium Nitrate Hexamethylenedamine 0.1 M Calcium Chloride hexane 0.1 M Calcium Nitrate Household Ammonia 0.1 M Cobalt Chloride household vinegar 0.1 M Cobalt Nitrate Hydrogen Peroxide 3% 0.1 M Lithium Chloride Iodine powder 0.1 M Magnesium Chloride Iron Sulfate 0.1 M Magnesium Sulfate Iron Tablets 0.1 M Potassium Iodide latex, red, blue, white 0.1 M Potassium Nitrate lemon juice 0.1 M Strontium Chloride Lithium Chloride 0.1M Ammonium Hydroxide Magnesium Chloride 0.1M and 2M Sodium Hydroxide Magnesium Metal 0.1M Copper Chloride Magnesium metal strips Chloride Test tablets Manganese Dioxide Citric Acid milk of magnesia Cobalt Chloride Mossy Zinc Metal Concentrated Nitric Acid Mr. Clean Copper Sulfate Muriatic Acid (HCl) Copper Test Tablets Nickel Chloride Copper Wire Nitrate tablets Cupric Nitrate Oxalic Acid food coloring pH buffer 10 Fructose pH buffer 4 pH buffer 7 pH Tablets polyvinyl alcohol Potassium Iodide Salt 0.1M Copper Sulfate 0.1M Hydrochloric Acid 0.1M Hydrochloric Acid 0.1M Magnesium Chloride 0.1M Phosphoric Acid 0.1M Sodium Hydroxide 0.2M Sodium Hydroxide 1% alcoholic phenolphthalein 10% Hydrochloric Acid 3.5% Sea water 5% borax 5% Sodium Hydroxide 6M Sulfuric Acid Acetone Albumin Alka-Seltzer tablets Aluminum metal Ascorbic Acid aspirin tablets Caffeine Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium w/Vit D Carbon 100% Alcohol 1M Sulfuric Acid Updated: August 23, 2019 ss Complete List of Chemicals These chemicals are stored in an adjacent area.
    [Show full text]
  • Cotton Response to Foliar Application of Potassium Compounds at Different Ph Levels
    Arkansas Cotton Response to Foliar Application of Potassium Compounds at Different pH Levels By M. A. Chang and D. M. Oosterhuis The pH of potassium (K) solutions used in foliar fertilization of cotton has a major effect on leaf burn, leaf expansion, K uptake by leaves, movement to the bolls, and lint yield. Leaf burn was decreased, while K concentration of plant organs and lint yield were increased at neutral to acidic pHs. WIDESPREAD K deficiencies have Table 1. Standard (S) and adjusted (A) pHs of K been reported across the U.S. Cotton Belt. solutions prepared to deliver 4.4 lb K 0/A in 10 gallons of water. These deficiencies are associated with the 2 introduction of early-maturing, short- season cultivars with higher fruit loads. K compound Standard (S) Aadjuste d (A) Deficiencies can be corrected by soil or KN03 9.4 4.0 foliar applications of K. Soil application at KCI §A 4.0 mid-to-late season may be less beneficial K S0 9.9 4.0 because of inefficient K uptake by the root 2 4 K2S203 6.8 4.0 system during boll development. K2C03 11.6 7.0 KOH 13.6 7.0 Foliar applications have the advantage KHCO3 8.2 _i of rapid absorption into the leaf and effi­ CH3COOK 8.3 _i cient movement to the developing bolls. 1 However, the response to foliar fertili­ Not adjusted due to excessive volume of buffer needed. zation with K has been inconsistent. Research in Tennessee has indicated four times with a carbon dioxide - pres­ that lowering the pH of foliar-applied sured backpack sprayer at 4.4 lb K 0/A at potassium nitrate (KN0 ) solutions 2 3 weekly intervals starting two weeks after increases K absorption by the leaf.
    [Show full text]
  • Salting out Ethanol from Water
    NCSU – Dept. of Chemistry – Lecture Demonstrations Organic Chemistry Salting Out Ethanol from Water Description: A mixture of ethanol and water is made immiscible by the addition of potassium carbonate. Materials: Deionized water Test tubes Ethanol Bromothymol blue K2CO 3 1 M HCl Procedure: 1. Prepare a large test tube with 10 mL ethanol, 10 mL water, a few drops of bromothymol blue indicator and one drop of 1 M HCl. The solution is homogeneous and yellow. 2. Add 3 g of K 2CO 3 to a second test tube and pour the solution from step 1 into this test tube. The test tube is sealed with a rubber stopper and mixed thoroughly with shaking. At this point the solution will become biphasic and the organic phase will be blue. Alternatively, this reaction can be scaled up in large graduated cylinders. NCSU – Dept. of Chemistry – Lecture Demonstrations Organic Chemistry Discussion: Water and ethanol are miscible due to their existing intermolecular forces, the strongest of those being hydrogen bonding. As an electrolyte (in this case K 2CO 3) is added to water, the solvation of the electrolyte makes water unavailable to hydrogen bond with ethanol. The solubility of ethanol decreases as a result of the lack of hydrogen bonding interactions with water. As a result, the organic dye which was initially yellow due to the acidic solution is absorbed into the organic phase with ethanol and becomes blue. Safety: Ethanol is flammable and should be kept away from any open flames. Disposal: The resulting mixture should be flushed down the drain with plenty of water.
    [Show full text]
  • POTASH by James P
    POTASH By James P. Searls Domestic survey data and tables were prepared by Joseph M. Krisanda, statistical assistant, and the world production table was prepared by Linder Roberts, international data coordinator. Potash denotes a variety of mined and manufactured salts, all photography, some fire extinguishers, animal feed supplements, containing the element potassium in water-soluble form. At the and as a catalyst for synthetic rubber manufacture. Generally, end of the 19th century, potash was made from hardwood trees these uses have accounted for no more than about 10% of and was a mixture of potassium carbonate and potassium annual consumption in the United States. hydroxide, both of which are caustic. Lye meant sodium hydroxide, and potash lye was potassium hydroxide, a higher Production grade product that made a better (softer, facial) grade of soap. Since approximately 1950, the term potash has been used to Production of all types and grades of potash in the United indicate potassium chloride (KCl, sylvite), potassium sulfate States could not be accurately published in 2001 owing to [K2SO4 or sulfate of potash (SOP), usually a manufactured proprietary data constraints. Production decreased by less than product and sometimes known in Russia and China as Lemery 10% compared with that of 2000 (table 1). salt], and potassium-magnesium sulfate [K2SO4C2MgSO4 or The U.S. Geological Survey (USGS) developed domestic langbeinite or sulfate of potash magnesia (SOPM or K-Mag)]. potash data from voluntary semiannual surveys of U.S. Muriate of potash (MOP) is an acceptable mix of potassium operations. Of the seven survey requests sent to operations for chloride (95% or greater) and sodium chloride that includes both semiannual surveys, six operations responded.
    [Show full text]
  • Safety Data Sheet POTASSIUM CARBONATE
    Safety Data Sheet POTASSIUM CARBONATE Safety Data Sheet dated 18/12/2018, version 12 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name: POTASSIUM CARBONATE CAS number: 584-08-7 EC number: 209-529-3 REACH number: 01-2119532646-36-0010 1.2. Relevant identified uses of the substance or mixture and uses advised against Recommended use: FOR INDUSTRIAL USE FOOD ADDITIVE ANTI-FREEZING AGENT RAW MATERIAL FOR ANIMAL FEEDS AGENTS OF pH REGULATORS PHARMACEUTICAL PRODUCTS FERTILIZER FOR PROFESSIONAL USE 1.3. Details of the supplier of the safety data sheet Company: ALTAIR CHIMICA S.p.a. Via Moie Vecchie 13 56048 Saline di Volterra (PI) Competent person responsible for the safety data sheet: [email protected] 1.4. Emergency telephone number ALTAIR CHIMICA S.p.a. Phone n. +39-0588-9811 SECTION 2: Hazards identification 2.1. Classification of the substance or mixture EC regulation criteria 1272/2008 (CLP) Warning, Eye Irrit. 2, Causes serious eye irritation. Warning, STOT SE 3, May cause respiratory irritation. Warning, Skin Irrit. 2, Causes skin irritation. Adverse physicochemical, human health and environmental effects: No other hazards 2.2. Label elements Hazard pictograms: Warning Hazard statements: H319 Causes serious eye irritation. H335 May cause respiratory irritation. H315 Causes skin irritation. Precautionary statements: P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash hands thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
    [Show full text]
  • CO​2​ Capture with Potassium Carbonate and Alcohol
    CO2 Capture with Potassium Carbonate ​ ​ and Alcohol † † † Olajumobi Akeeb ,​ Connor Junes ,​ Zachary Luedtke † ​ ​ ​ ​ ​ Swenson​ College of Science & Engineering, Department of Chemical Engineering, University of Minnesota Duluth, 1303 Ordean Ct, Duluth, Minnesota 55812, United States. ​ ​ Abstract Traditional CO capture technologies using amine-based sorbents are very energy ​2 intensive and result in secondary environmental pollution originating from amine degradation. In this work, a low temperature, energy saving and environmentally friendly CO capture method ​2 has been investigated using potassium carbonate-alcohols-water mixtures as sorbents. The addition of certain amounts of alcohols, especially methanol to the potassium carbonate solution can significantly increase the CO absorption and desorption amounts, as well as the capture ​2 capacity. The absorbent containing 50 wt% (~90 g) methanol, ~20 g potassium carbonate, and ~90 g water has proven to be the best mixture for CO2 capture using this inorganic capture ​ ​ method. This research demonstrates a catalytic CO capture route that is promising to be ​2 economical as well as environmentally safe, and energy saving. 1. Introduction The emission of greenhouse gases (GHG) has seen a significant increase since the start of the industrial revolution. A significant amount of attention has been drawn to the rising levels of CO2 in the atmosphere, causing an increase in the global temperature and noticeable climate ​ ​ changes [1]. CO2 capture and storage or utilization is one of the methods that can be used to ​ ​ reduce the amount of GHG in the atmosphere, minimize their warming effects and fight climate change. Carbon capture and storage (CCS) technologies are used to reduce the emissions of GHG by capturing the CO2 gas.
    [Show full text]
  • Potash Sulfurated 1
    MSDS Number: P5359 * * * * * Effective Date: 03/28/11 * * * * * Supersedes: 11/21/08 POTASH SULFURATED 1. Product Identification Synonyms: Liver of sulfur; sulfurated potassa; hepar sulfuris CAS No.: 39365-88-3 (Potash) Molecular Weight: Not applicable to mixtures. Chemical Formula: Not applicable. Product Codes: J.T. Baker: 2909 Macron: 7155 2. Composition/Information on Ingredients Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Potassium Trisulfide 37488-75-8 25% Yes Potassium Thiosulfate Hydrated 10294-66-3 75% Yes 3. Hazards Identification Emergency Overview -------------------------- WARNING! FLAMMABLE SOLID. HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. DUST MAY FORM FLAMMABLE OR EXPLOSIVE MIXTURE WITH AIR. SAF-T-DATA(tm) Ratings (Provided here for your convenience) ----------------------------------------------------------------------------------------------------------- Health Rating: 2 - Moderate Flammability Rating: 3 - Severe (Flammable) Reactivity Rating: 2 - Moderate Contact Rating: 1 - Slight Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES; CLASS D EXTINGUISHER Storage Color Code: Red (Flammable) ----------------------------------------------------------------------------------------------------------- Potential Health Effects ---------------------------------- Inhalation: Inhalation of dust can irritate the respiratory tract. Production of hydrogen sulfide from reaction with acids or high temperature
    [Show full text]
  • Procedure for Ultramild Deprotection of Oligonucleotides
    PROCEDURE FOR ULTRAMILD DEPROTECTION OF OLIGODEOXYNUCLEOTIDES The synthesis of labelled oligonucleotides TAMRA, Cyanine 5 and HEX since cleavage and has become a standard procedure in many deprotection can be carried out in 4 hours at room laboratories and many labelling reagents, temperature with 0.05M potassium carbonate in e.g., biotin and fluorescein, are now available anhydrous methanol as described below. as ß-cyanoethyl (CE) phosphoramidites. Labels which are currently available as CE PROCEDURE phosphoramidites have one common property - they must be stable to the strongly alkaline 1. Carry out the synthesis of oligonucleotides conditions required for removal of the base containing labile bases or tags using protecting groups. This property is lacking in recommended procedures. several interesting dyes and labels. We sought an 2. Open the synthesis column and transfer alternative protecting scheme for the normal CE the support to a suitable reaction vial. phosphoramidites which would allow UltraMILD 3. Treat the support with 1 mL of 0.05M deprotection and would not react with a wider potassium carbonate in anhydrous variety of sensitive monomers, tags and labels. methanol for a minimum of 4 h at room A set of monomers using phenoxyacetyl (Pac) temperature. protected dA and 4-isopropyl-phenoxyacetyl (iPr- 4. Pipette the supernatant from the Pac) protected dG, along with acetyl protected support and neutralize with 1.5mL of 2M dC, met the desired criteria for UltraMILD triethylammonium acetate. deprotection. Either: We recommend the use of phenoxyacetic 5. Desalt the oligonucleotide using normal anhydride (Pac2O) in Cap A. This modification procedures, lyophilize the resulting removes the possibility of exchange of the iPr- product and store the oligonucleotide at Pac protecting group on the dG with acetate from -20°C.
    [Show full text]