Rittal Handbook 34

Power distribution

Busbar systems Overview ...... 205 Mini-PLS busbar system (40 mm) ...... 206 RiLine shrouded busbar systems (60 mm) ...... 212 RiLine fuse elements...... 236 RiLine accessories...... 251

Ri4Power Form 1-4 Overview ...... 267 Baying systems TS 8 ...... 76 Installation accessories for modular front design ...... 552 Maxi-PLS busbar systems ...... 268 Flat-PLS busbar systems...... 271 Connection components for Maxi-PLS/Flat-PLS...... 274 Busbar systems (100/185/150 mm)...... 278 Cover systems Form 1...... 281 Compartment configuration Form 1-4...... 283 Ri4Power accessories ...... 289

Ri4Power ISV distribution enclosures Overview ...... 297 Baying systems TS 8 ...... 75 Mounting kits for TS, SE ...... 298 Mounting kits for AE ...... 298 Installation modules ...... 299 Accessories...... 304

Rittal Catalogue 34/Power distribution 197 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com nextlevel for industry

Automate your processes. Computer-assisted switchgear engineering with Eplan and Power Engineering allows you to plan your switchgear in next to no time, and order the required components at the push of a button.

Rittal – The System. ◾ Eplan – Efficient engineering ◾ Rittal – Power Engineering ◾ Rittal – Tested power distribution systems

198 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Rittal Catalogue 34/Power distribution 199 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Power distribution from the smallest to the largest

The tried-and-trusted, super-flexible power distribution system for individual requirements. From small power distribution, to individual switchgear and controlgear, through to heavy-current power distribution for infrastructure and industry applications.

◾ RiLine – Busbar systems and components for switchgear and controlgear ◾ Ri4Power – The modular system for low-voltage switchgear ◾ Ri4Power ISV – The modular distribution enclosure system for infrastructure power supply

200 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ◾ Design verification to IEC 61 439 – Made easy with tested system solutions ◾ Increased planning confidence – Power Engineering ensures optimised designs

Rittal Catalogue 34/Power distribution 201 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Your benefits

As a system supplier, Rittal is a leading global provider of tested system engineering solutions.

Planning Enclosures Busbars ◾ Eplan – Engineering tools ◾ Strength requirements ◾Short-circuit withstand ◾ Power Engineering (IEC 61 439) tested strength with heat loss ◾ IP protection category ◾ Current carrying capacity calculation tested ◾ Dielectric properties ◾ Therm – Climate control ◾ Verified PE conductor ◾ Clearance and creepage design function distances ◾ All verified in conjunction with the enclosure

202 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Climate control Switchgear ◾ Cooling units ◾ Rittal fuse technology ◾ Air cooling ◾ Protection devices, switch- ◾ Liquid cooling gear and controlgear from all well-known manufacturers

Simple generation: Design verification to IEC 61 439

Rittal Catalogue 34/Power distribution 203 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com 204 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems

Mini-PLS busbar system (40 mm) Busbar supports...... 206 Special busbars E-Cu...... 206 Contact hazard protection ...... 206 Busbar connection adaptor ...... 206 Bus-mounting fuse base...... 207 NH fuse-switch disconnector, size 000...... 207 Component adaptor up to 25 A...... 208 Component adaptor up to 100 A...... 209 Allocation of switchgear...... 209

RiLine busbar systems (60 mm) Flat copper bar system ...... 212 PLS busbar system ...... 214 Busbar connection adaptor ...... 216 Busbar connection adaptor expansion set...... 218 OM adaptor up to 65 A, with connection cables ...... 219 OM adaptor up to 65 A, with tension spring clamps ...... 222 OM adaptor up to 25 A, with plug-in cable outlet...... 224 OM support ...... 225 Circuit-breaker component adaptor up to 630 A, 3-pole...... 226 Circuit-breaker component adaptor up to 500 A, 4-pole...... 229 Allocation of switchgear...... 231 Bus-mounting fuse bases ...... 236 NH fuse-switch disconnector, size 000...... 238 NH fuse-switch disconnector, size 00 to 3...... 240 – with electronic fuse monitoring...... 242 – with electromechanical fuse monitoring...... 244 NH slimline fuse-switch disconnectors, size 00 to 3...... 246 – with electronic fuse monitoring...... 248 Fuse holder 30 A to 400 A...... 249 RiLine accessories...... 251

Rittal Catalogue 34/Power distribution 205 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Mini-PLS busbar system (40 mm)

Component adaptors Page 208 Fuse components Page 207

Busbar supports, Colour: Contact hazard protection Technical details: busbar connection adaptors – RAL 7035 Available on the Internet Material: – RAL 9011 (busbar connection Material: – Thermally modified hard PVC adaptor chassis) – Polyamide (PA 6.6) – Fire protection corresponding – Fire protection corresponding to UL 94-V0 to UL 94-V0 Colour: – RAL 7035

Mini-PLS busbar supports (3-pole) Busbar support, suitable for top mounting Packs of ◾ Bar centre distance mm 40 Approvals Model No. 4 pc(s). 9600.000

A Mini-PLS special busbars E-Cu, bar thickness 3 mm, bar cross-section 120 mm2 Length mm Packs of 500 700 1100 1500 Approvals A Model No. 3 pc(s). 9601.000 9602.000 9603.000 9624.000 B Accessories Approvals Model No. B Busbar connectors 3 pc(s). 9611.000

Mini-PLS contact hazard protection Components Approvals Length mm Packs of Model No. C D 500 1 pc(s). 9605.000 C Base tray 700 1 pc(s). 9606.000 1100 1 pc(s). 9607.000 250 1 pc(s). 9608.000 D Cover section E 500 1 pc(s). 9609.000 E End cover – 2 pc(s). 9610.000

Mini-PLS busbar connection adaptors (3-pole) Page Rated current max. A Packs of 63 250 Rated operating voltage V, ~ 690, 3~ 690, 3~ Cable outlet Top/bottom Top/bottom Connection of round conductors mm² 1.5 – 35 10 – 120 Clamping area for laminated copper bars, W x H mm 10 x 8 17 x 15 Width mm 54 115 Height mm 160 182 Approvals Model No. 1 pc(s). 9613.000 9612.000 Accessories Laminated copper bars ◾ ◾ 255

206 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Mini-PLS fuse elements

Busbar system Page 206 Busbar connection adaptors Page 206 Component adaptors Page 208/209

Bus-mounting fuse base NH fuse-switch disconnector Busbar adaptor Technical details: Available on the Internet Material: Material: Material: – Polyamide (PA 6.6) – Fibreglass-reinforced poly- – Polyamide (PA 6.6) – Fire protection corresponding amide – Fire protection corresponding to UL 94-V0 – Fire protection corresponding to UL 94-V0 to UL 94-V0 Colour: Colour: – Contact tracks: Silver-plated – Chassis: RAL 9011 – RAL 9011 hard copper – Cover: RAL 7035 Colour: – RAL 7035 Basis of test: – IEC 60 947-3 – IEC 60 269-2 (fuse inserts)

Mini-PLS bus-mounting fuse base (3-pole) Fuse insert Packs of D 02-E18 Rated current max. A 63 Rated operating voltage V, ~ 400, 3~ Connection of round conductors mm² 1.5 – 16 Width mm 38 Height mm 160 Model No. 1 pc(s). 9630.000

NH fuse-switch disconnector size 000 (3-pole) Rated current max. A Packs of 100 Page Rated operating voltage V, ~ 690, 3~ Cable outlet Top/bottom Type of connection Box terminal Connection of round conductors mm² 1.5 – 50 Clamping area for laminated copper bars, W x H mm 10 x 10 Width mm 89 Height mm 141.5 Model No. 1 pc(s). 3431.000 238 Also required Mini-PLS busbar adaptors (3-pole) With connection cables mm² 35 Width mm 90 Height mm 160 Model No. 1 pc(s). 9629.100 Accessories Micro-switch 5 pc(s). 3071.000 263

Rittal Catalogue 34/Power distribution 207 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Mini-PLS component adaptor

Busbar system Page 206 Busbar connection adaptors Page 206 Fuse components Page 207 Allocation of switchgear Page 209

Material: Colour: Technical details: – Polyamide (PA 6.6) – RAL 7035 Available on the Internet – Fire protection corresponding – RAL 9011 (9629.000) to UL 94-V0

Rated current max. 12 – 25 A

Rated current max. A Packs of 12 25 25 25 25 25 25 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Connection cables AWG 14 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 Support rails quantity/height mm 1/7.5 1/7.5 1/15 1/7.5 1/15 1/7.5 1/7.5 Width mm 45 45 45 54 54 72 90 Height mm 160 160 160 160 160 160 160 Approvals Model No. 1 pc(s). 9614.110 9614.100 9615.100 9614.000 9615.000 9625.000 9629.010 Accessories Insert strip 2 pc(s). 9623.000 9623.000 9623.000 9623.000 9623.000 9623.000 9623.000 258 Width 45 mm 10 pc(s). 9320.150 9320.150 9320.150 – – – 9320.150 258 Support rails, Width 54 mm 10 pc(s). – – – 3548.000 3548.000 – – 258 Height 7.5 mm Width 72 mm 10 pc(s). – – – – – 3549.000 – 258

208 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Mini-PLS component adaptor Rated current max. 40 – 100 A

Rated current max. A Packs of 40 40 40 100 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Connection cables AWG 10 AWG 10 AWG 10 35 mm2 Support rails quantity/height mm 1/7.5 1/15 1/7.5 – Width mm 54 54 72 90 Height mm 160 160 160 160 Approvals Model No. 1 pc(s). 9616.000 9617.000 9627.000 9629.000 Accessories Insert strip 2 pc(s). 9623.000 9623.000 9623.000 – 258 Width 54 mm 10 pc(s). 3548.000 3548.000 – – 258 Height 7.5 mm Support rails Width 72 mm 10 pc(s). – – 3549.000 – 258 Height 15 mm Width 72 mm 5 pc(s). – – – 9320.120 261

Allocation of switchgear – Mini-PLS component adaptors 12 A/25 A Make/model Model No. Make/model Model No. ABB Siemens MS116 9614.100 S0 MS325 9614.000 3RV10 21... 9614.100 MS450 (max. 25 A) 9614.000 3RV20 21... (up to 25 A) 9614.100 MS451 (max. 25 A) 9614.000 S00 1) Eaton 3RV10 11... 9614.100 3RV20 11... 9614.1001) PKZM0 (up to 25 A) 9614.100 S2 PKZM01 (up to 25 A) 9614.100 3RV10 31... (up to 25 A) 9614.000 PKZM4 (up to 25 A) 9614.000 1) PKE12 9614.100 Support rail must be offset PKE32 (up to 25 A) 9614.100 PKE65 (up to 25 A) 9614.000 Schneider Electric GV2-P (up to 25 A) 9614.100 GV2-RT 9614.100 GV2-LE10 9614.100 GV3 (up to 25 A) 9614.100

Allocation of switchgear – Mini-PLS component adaptors 40 A/100 A Accessories Accessories Make/model Model No. Make/model Model No. Model No. Model No. ABB Schneider Electric MS450 (max. 40 A) 9617.000 – NS 80 9629.000 – MS451 (max. 40 A) 9629.000 9320.120 GV3 (max. 40 A) 9616.000 – MS495 9629.000 9320.120 GV3 9629.000 9320.120 MS496 9629.000 9320.120 Siemens MS497 9629.000 9320.120 Tmax S2 T1 9629.000 – 3RV10 31... (max. 40 A) 9616.000 – T2 9629.000 – 3RV10 31... 9629.000 9320.120 S3 Eaton 3RV1341/42 9629.000 9320.120 NZM 1 9629.000 – PKZ2 9627.000 – PKZM4 (max. 40 A) 9617.000 – PKZM4 9629.000 9320.120

Rittal Catalogue 34/Power distribution 209 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com 210 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine Busbar systems 3 and 4-pole and DC Support + bars + contact hazard protection ◾ Flat copper bar system, see page 212 ◾ PLS busbar system, see page 214 ◾ Accessories, see page 251

Connection system 3 and 4-pole ◾ Busbar connection adaptor, see page 216 ◾ Connection clamps, see page 257 ◾ Connection block, see page 258 ◾ Accessories, see page 257

Component adaptor 3 and 4-pole ◾OM adaptor, see page 219 ◾ Circuit-breaker component adaptor, see page 226 ◾ Accessories, see page 259

Fuse elements 3-pole ◾ Bus-mounting fuse bases, see page 236 ◾ NH fuse-switch disconnectors, see page 238 ◾ NH slimline fuse-switch disconnectors, see page 246 ◾ Fuse holders, see page 249 ◾ Accessories, see page 262

Rittal Power Engineering with update function Model No. 3020.500, see page 295 ◾ Configuration of RiLine busbar systems ◾ Simple component selection, integral switchgear database ◾ Automatic calculation of rated currents and heat losses

Rittal Catalogue 34/Power distribution 211 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine shrouded busbar systems up to 800 A (60 mm)

Busbar connection adaptors Page 216 Component adaptors Page 219 Fuse elements Page 236

Material: Note: Technical details: – Polyamide (PA 6.6) – UL approval only valid in con- Available on the Internet – Fire protection corresponding junction with AC applications to UL 94-V0 – The use of a base tray is required for UL applications Colour: – RAL 7035

Flat copper bar system Busbar support

Number of poles Packs of 3-pole 3-pole 3-pole 4-pole Page Bar centre distance mm 60 60 60 60 External attachment ◾ – – – Internal attachment – ◾ ◾ ◾ 12 x 5/10 ◾ ◾ – ◾ For busbars mm 15 x 5 – 25 x 10, 30 x 5 ◾ ◾ ◾ ◾ 30 x 10 ◾ ◾ ◾ ◾ 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ Rated operating voltage V, ~ – – 1500 (DC) – Approvals – – Model No. 4 pc(s). 9340.010 9340.000 9340.050 9340.004 Also required Spacers when using busbars 12 x 5/10 mm ◾ ◾ – ◾ Model No. 12 pc(s). 9340.090 9340.090 – 9340.090 251

212 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine shrouded busbar systems up to 800 A (60 mm) Flat copper bar system Busbar support

Number of poles Packs of 3-pole 3-pole 3-pole 4-pole Page Bar centre distance mm 60 60 60 60 Model No. 4 pc(s). 9340.010 9340.000 9340.050 9340.004 212 Also required Spacer when using busbars 12 x 5/10 mm ◾ ◾ – ◾ Model No. 12 pc(s). 9340.090 9340.090 – 9340.090 251

Contact hazard protection Length Components Approvals Packs of Model No. Model No. Page C mm B A End covers – 2 pc(s). 9340.070 9340.070 9340.070 9340.074 – B Base trays 500 2 pc(s). – 9340.100 9340.100 – 256 700 2 pc(s). – 9340.110 9340.110 – 256 900 2 pc(s). – 9340.120 9340.120 – 256 1100 2 pc(s). – 9340.130 9340.130 9340.134 256 2400 1 pc(s). – 9340.170 – – 256 C Base tray infills 100 2 pc(s). – 9340.140 9340.140 – 256 A E F D D Cover sections 700 2 pc(s). – 9340.200 9340.200 – 256 1100 2 pc(s). – 9340.210 9340.210 9340.214 256 E Support panels – 5 pc(s). – 9340.220 9340.220 9340.224 256 F Cross members 160 2 pc(s). – – 9340.230 – 256

Busbars E-Cu; length: 2400 mm/bar Max. rated current A Dimensions acc. to Approvals Packs of Model No. Model No. Page mm DIN EN UL 508 12 x 5 210 – 6 pc(s). 3580.000 3580.000 3580.000 3580.000 252 12 x 10 340 – 6 pc(s). 3580.100 3580.100 3580.100 3580.100 252 15 x 5 260 175 6 pc(s). 3581.000 3581.000 3581.000 3581.000 252 15 x 10 360 350 6 pc(s). 3581.100 3581.100 3581.100 3581.100 252 20 x 5 319 230 6 pc(s). 3582.000 3582.000 3582.000 3582.000 252 20 x 10 497 465 3 pc(s). 3585.005 3585.005 3585.005 3585.005 252 25 x 5 384 290 6 pc(s). 3583.000 3583.000 3583.000 3583.000 252 30 x 5 447 350 6 pc(s). 3584.000 3584.000 3584.000 3584.000 252 30 x 10 800 700 3 pc(s). 3586.005 3586.005 3586.005 3586.005 252

CUPONAL busbars; length: 2400 mm/bar Max. rated current A Dimensions acc. to Approvals Packs of Model No. Model No. Page mm DIN EN UL 508 20 x 5 235 – – 6 pc(s). – 3582.020 3582.020 – 252 20 x 10 363 – – 3 pc(s). – 3585.020 3585.020 – 252 30 x 5 328 – – 6 pc(s). – 3584.020 3584.020 – 252 30 x 10 493 – – 3 pc(s). – 3586.020 3586.020 – 252 Accessories For busbars Components Approvals Packs of Model No. Model No. Page mm 12 x 5 – 15 x 10 3 pc(s). 9350.075 9350.075 9350.075 9350.075 254 Busbar connectors for single connection 20 x 5 – 30 x 10 3 pc(s). 9320.020 9320.020 9320.020 9320.020 254 Busbar connectors for baying connection1) 20 x 5 – 30 x 10 3 pc(s). 9320.030 9320.030 9320.030 9320.030 254 12 x 5 – 30 x 10 10 pc(s). 3092.000 3092.000 3092.000 3092.000 253 Busbar cover sections 12/15 x 5 4 pc(s). 9350.010 9350.010 9350.010 9350.010 253 Length: 1000 mm/section 12/15 x 10 4 pc(s). 9350.060 9350.060 9350.060 9350.060 253 1) Connection from enclosure to enclosure

Rittal Catalogue 34/Power distribution 213 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine shrouded busbar systems 800 A/1600 A (60 mm)

Connection systems Page 216 Component adaptors Page 219 Fuse elements Page 236

PLS busbar system Busbar support

PLS 1600 PLUS

For Rittal system Packs of PLS 800 PLS 1600 Number of poles 3-pole 3-pole 3-pole 3-pole 4-pole Bar centre distance mm 60 60 60 60 60 Internal attachment ◾ ◾ ◾ ◾ ◾ Busbar support, suitable for top mounting ◾ ◾ ◾ ◾ – 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ Rated operating voltage V, ~ – 1500 (DC) – 1500 (DC) – Approvals – – Model No. 4 pc(s). 9341.000 9341.050 9342.000 9342.050 9342.004

214 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine shrouded busbar systems 800 A/1600 A (60 mm) PLS busbar system Busbar support

PLS 1600 PLUS

For Rittal system Packs of PLS 800 PLS 1600 Page Number of poles 3-pole 3-pole 3-pole 3-pole 4-pole Bar centre distance mm 60 60 60 60 60 Model No. 4 pc(s). 9341.000 9341.050 9342.000 9342.050 9342.004 214

Contact hazard protection Length Components Approvals Packs of Model No. Model No. Page C mm B A End covers – 2 pc(s). 9341.070 9341.070 9342.070 9342.070 9342.074 – B Base trays 500 2 pc(s). 9341.100 9341.100 9342.100 9342.100 – 256 700 2 pc(s). 9341.110 9341.110 9342.110 9342.110 – 256 900 2 pc(s). 9341.120 9341.120 9342.120 9342.120 – 256 1100 2 pc(s). 9341.130 9341.130 9342.130 9342.130 9342.134 256 2400 1 pc(s). 9341.170 – 9342.170 – – 256 C Base tray infills 100 2 pc(s). 9341.140 9341.140 9342.140 9342.140 – 256 A E F D D Cover sections 700 2 pc(s). 9340.200 9340.200 9340.200 9340.200 – 256 1100 2 pc(s). 9340.210 9340.210 9340.210 9340.210 9340.214 256 E Support panels – 5 pc(s). 9340.220 9340.220 9340.220 9340.220 9340.224 256 F Cross members 160 2 pc(s). – 9340.230 – 9340.230 – 256

PLS special busbars E-Cu Version Packs of PLS 800 PLS 1600 Page Bar cross-section mm2 300 900 Bar thickness mm 5 10 Max. rated current A DIN EN 800 1600 acc. to UL 508 700 1400 For enclosure width Length mm Approvals Model No. Model No. mm 495 600 3 pc(s). 3524.000 3527.000 253 695 800 3 pc(s). 3525.000 3528.000 253 895 1000 3 pc(s). 3525.010 3528.010 253 1095 1200 3 pc(s). 3526.000 3529.000 253 2400 variable 1 pc(s). 3509.000 3516.000 253 Accessories Components Approvals Packs of Model No. Model No. Page Single connection 3 pc(s). 3504.000 3514.000 254 PLS busbar connectors Baying connection1) 3 pc(s). 3505.000 3515.000 254 PLS expansion connectors2) 3 pc(s). 9320.060 9320.070 254 1) Connection from enclosure to enclosure 2) Two PLS busbar connectors (single connection) are required to fit one expansion connector

Rittal Catalogue 34/Power distribution 215 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection adaptors

Busbar system Page 212 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Fuse elements Page 236

Material: Colour: Note: Technical details: –Cover: ABS – RAL 7035 – The technical data may vary for Available on the Internet – Chassis: Polyamide (PA 6.6) UL applications – Chassis 3439.010: Fibreglass- – UL approval only applies in reinforced, thermoplastic poly- conjunction with AC application ester (PBT) – The rated operating voltage for – Fire protection corresponding DC applications depends on to UL 94-V0 the busbar arrangement in the busbar support 9340.050/ 9341.050/9342.050.

Rated current max. 63 – 125 A

Packs Rated current max. A 63 63 125 125 125 Page of Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 4~ Rated operating voltage (L1 + L2) V – 1000 (DC) – 1000 (DC) – Rated operating voltage (L1 + L3) V – 1500 (DC) – 1500 (DC) – Number of poles 3-pole 3-pole 3-pole 3-pole 4-pole Cable outlet Top Bottom Top/bottom Bottom Top/bottom Connection of round conductors, fine wire with wire 2.5 - 10 2.5 - 10 10 - 25 10 - 25 10 - 25 end ferrule mm² Connection of round conductors, multi-wire mm² 2.5 - 10 2.5 - 10 16 - 35 16 - 35 16 - 35 Connection of round conductors, single-wire mm² 2.5 - 10 2.5 - 10 – – – Clamping area for laminated copper bars, W x H mm – – 10 x 7.8 10 x 7.8 10 x 7.8 Clamping area for laminated copper bars, W x H – – – – – (for 5 mm bar thickness) mm Clamping area for laminated copper bars, W x H – – – – – (for 10 mm bar thickness) mm Width mm 20 20 55 55 75 Height mm 215 215 210 210 270 Approvals UL UL UR UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9342.200 9342.210 9342.220 9342.240 9342.224 Accessories Laminated copper bars – – see page see page see page 255 Connection adaptor expansion set – – – – –

216 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection adaptors Rated current max. 250 – 600 A

Rated current max. A 250 250 250 600 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 4~ 690, 3~ Rated operating voltage (L1 + L2) V – 1000 (DC) – – Rated operating voltage (L1 + L3) V – 1500 (DC) – – Number of poles 3-pole 3-pole 4-pole 3-pole Cable outlet Top/bottom Bottom Top/bottom Top/bottom Connection of round conductors, fine wire with wire 35 - 120 35 - 120 35 - 120 35 - 240 end ferrule mm² Connection of round conductors, multi-wire mm² 35 - 120 35 - 120 35 - 120 35 - 240 Connection of round conductors, single-wire – – – – Clamping area for laminated copper bars, W x H mm 18.5 x 15.5 18.5 x 15.5 18.5 x 15.5 24 x 21 Clamping area for laminated copper bars, W x H – – – – (for 5 mm bar thickness) mm Clamping area for laminated copper bars, W x H – – – – (for 10 mm bar thickness) mm Width mm 90 90 118 180 Height mm 210 210 270 247 Approvals UL UL UL – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 9342.250 9342.270 9342.254 3439.010 Packs 1 pc(s). 1 pc(s). 1 pc(s). 1 set(s) of Accessories Laminated copper bars see page see page see page see page 255 Connection adaptor expansion set––––

Rated current max. 800 – 1600 A

Rated current max. A 800 800 800 1600 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Rated operating voltage (L1 + L2) V – 1000 (DC) 1000 (DC) 1000 (DC) Rated operating voltage (L1 + L3) V – 1500 (DC) 1500 (DC) 1500 (DC) Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Bottom Top/bottom Connection of round conductors, fine wire with wire 95 - 185 95 - 185 95 - 185 – end ferrule mm² Connection of round conductors, multi-wire mm² 95 - 300 95 - 300 95 - 300 – Connection of round conductors, single-wire – – – – Clamping area for laminated copper bars, W x H mm 33 x 20 – 33 x 20 – Clamping area for laminated copper bars, W x H – 33 x 26 – 65 x 27 (for 5 mm bar thickness) mm Clamping area for laminated copper bars, W x H – 33 x 21 – 65 x 22 (for 10 mm bar thickness) mm Width mm 129 150 129 255 Height mm 246 210 246 210 Approvals UR UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 9342.280 9342.310 9342.300 9342.320 Packs 1 pc(s). 1 set(s) 1 pc(s). 1 set(s) of Accessories Laminated copper bars see page see page see page see page 255 Connection adaptor expansion set 1 pc(s). – 9342.314 – 9342.324 218

Rittal Catalogue 34/Power distribution 217 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection adaptor expansion set

Busbar system Page 212 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Fuse elements Page 236

Single-pole extra set to comple- Material: Note: Technical details: ment the 3-pole connection –Cover: ABS – The technical data may vary for Available on the Internet adaptor for 4-pole configurations. – Chassis: Polyamide (PA 6.6) UL applications – Fire protection corresponding – UL approval only applies in to UL 94-V0 conjunction with AC application Colour: – RAL 7035

for 4-pole configuration

Packs To fit Model No. 9342.310 9342.320 Page of Rated current max. A 800 1600 Rated operating voltage V, ~ 690, 1~ 690, 1~ Number of poles Single-pole Single-pole Connection of round conductors, fine wire with wire 95 - 185 – end ferrule mm² Connection of round conductors, multi-wire mm² 95 - 300 – Clamping area for laminated copper bars, W x H 33 x 26 65 x 27 (for 5 mm bar thickness) mm Clamping area for laminated copper bars, W x H 33 x 21 65 x 22 (for 10 mm bar thickness) mm Width mm 50 85 Height mm 270 270 Approvals UL UL For bar systems with centre-to-centre spacing mm 60 60 For bar thickness mm 5/10 5/10 Model No. 1 pc(s). 9342.314 9342.324 Accessories Laminated copper bars see page see page 255

218 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors

Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Allocation of switchgear Page 231

Material: Note: Technical details: – Polyamide (PA 6.6) – The technical data may vary for Available on the Internet – Fire protection corresponding UL applications to UL 94-V0 Colour: – Chassis: RAL 7035

Rated current max. 16 – 25 A, with connection cables

Rated current max. A Packs of 16 25 25 25 25 25 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 Connection cables, length mm 165 130 130 130 130 130 With support frame mm 45 x 237 – 45 x 170 45 x 170 – 45 x 170 With support frame support ◾ – – – – – With PinBlock ◾ – – ◾ – – With insert strips – – – – – – Support rails Qty/height mm 1 / 10 1 / 10 1 / 10 1 / 10 2 / 10 3 / 10 TS 45D Support rail version TS 45D TS 45C TS 45C TS 45C TS 45D TS 45D-V Width mm 45 45 45 45 45 90 Height mm 272 208 208 208 208 208 Approvals UL UL UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.760 9340.310 9340.340 9340.370 9340.320 9340.400 Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 – 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 – 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page – 225 PinBlock 5 pc(s). – – 9342.800 – – 9342.800 260

Rittal Catalogue 34/Power distribution 219 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors Rated current max. 32 A, with connection cables

Rated current max. A Packs of 32 32 32 32 32 32 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 10 AWG 10 AWG 10 AWG 10 AWG 10 AWG 10 Connection cables, length mm 130 130 130 165 130 130 With support frame mm 45 x 170 45 x 170 45 x 237 45 x 237 55 x 170 55 x 170 With support frame support – – ◾ ◾ – – With PinBlock – – – ◾ – – With insert strips – – – – – – Support rails Qty/height mm 1 / 10 2 / 10 2 / 10 1 / 10 1 / 10 2 / 10 TS 45D TS 45D TS 55D Support rail version TS 45C TS 45D TS 55D TS 45D-V TS 45D-V TS 55D-V Width mm 45 45 45 45 55 55 Height mm 208 208 272 272 208 208 Approvals UL UL UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.350 9340.380 9340.390 9340.770 9340.460 9340.470 Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page see page 225 PinBlock 5 pc(s). 9342.800 9342.800 9342.800 9342.800 9342.810 9342.810 260

Rated current max. 40 A, with connection cables

Rated current max. A Packs of 40 40 40 40 40 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 8 AWG 8 AWG 8 AWG 8 AWG 8 Connection cables, length mm 130 130 130 130 130 With support frame mm 55 x 170 – – 55 x 237 – With support frame support – – – ◾ – With PinBlock – – – – – With insert strips – – – – ◾ Support rails Qty/height mm 1 / 10 2 / 10 1 / 15 2 / 10 2 / 7.5 TS 55D Support rail version TS 55D TS 55D Metal Metal TS 55D-V Width mm 55 55 55 55 75 Height mm 208 208 208 272 208 Approvals UL UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.720 9340.740 9340.750 9340.730 9340.710 Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 – 259 Support rails from page from page from page from page from page 259 OM supports see page see page see page see page see page 225 PinBlock 5 pc(s). 9342.810 – – 9342.810 – 260

220 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors Rated current max. 65 A, with connection cables

Rated current max. A Packs of 65 65 65 65 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 6 AWG 6 AWG 6 AWG 6 Connection cables, length mm 130 130 130 130 With support frame mm – 55 x 170 55 x 237 – With support frame support – – ◾ – With PinBlock – – – – With insert strips – – – ◾ Support rails Qty/height mm 1 / 10 1 / 10 2 / 10 1 / 7.5 TS 55E Support rail version TS 55E TS 55E Metal TS 55D-V Width mm 55 55 55 75 Height mm 208 208 272 208 Approvals UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.410 9340.430 9340.450 9340.700 Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 – 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 – 259 Support rails from page from page from page from page 259 OM supports see page see page see page see page 225 PinBlock 5 pc(s). – 9342.810 9342.810 – 260

Power Engineering

see page 295 Accessories

Rittal Catalogue 34/Power distribution 221 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors

Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Allocation of switchgear Page 231

Material: Technical details: – Polyamide (PA 6.6) Available on the Internet – Fire protection corresponding to UL 94-V0 Colour: – Chassis: RAL 7035

Rated current max. 32 A, with tension spring clamp

Rated current max. A Packs of 32 32 32 32 32 32 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Connection of round conductors mm² 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 With support frame mm – – 45 x 170 45 x 170 45 x 237 55 x 170 With support frame support – – – – ◾ – With PinBlock – – – ◾ – – Support rails Qty/height mm 1 / 10 2 / 10 1 / 10 1 / 10 2 / 10 1 / 10 TS 45D Support rail version TS 45C TS 45D TS 45C TS 45C TS 55D TS 45D-V Width mm 45 45 45 45 45 55 Height mm 208 208 208 208 272 208 For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.510 9340.520 9340.530 9340.550 9340.560 9340.660 Accessories Cable set see page see page see page see page see page see page 260 Twin cords –––––– Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page see page 225 PinBlock 5 pc(s). – – 9342.800 9342.800 9342.800 9342.810 260

222 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors Rated current max. 65 A, with tension spring clamp

Rated current max. A Packs of 65 65 65 65 Page Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Connection of round conductors mm² 2.5 - 16 2.5 - 16 2.5 - 16 2.5 - 16 With support frame mm – – 55 x 170 55 x 237 With support frame support – – – ◾ With PinBlock – – – – Support rails Qty/height mm 1 / 10 2 / 10 1 / 10 2 / 10 TS 55E TS 55E Support rail version TS 55E TS 55E TS 55D TS 55D-V Width mm 55 55 55 55 Height mm 208 208 208 272 For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9340.610 9340.620 9340.630 9340.650 Accessories Cable set see page see page see page see page 260 Twin cords see page see page see page see page 260 Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page 259 OM supports see page see page see page see page 225 PinBlock 5 pc(s). – – 9342.810 9342.810 260

Therm software

see page 385 Accessories

Rittal Catalogue 34/Power distribution 223 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptors

Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236

Material: Technical details: – Polyamide (PA 6.6) Available on the Internet – Fire protection corresponding to UL 94-V0 Colour: – Chassis: RAL 7035

Rated current max. 25 A, with plug-in cable outlet

Packs Rated current max. A 25 25 25 Page of Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole Connection of round conductors mm² 1.5 - 4 1.5 - 4 1.5 - 4 With support frame mm 45 x 170 55 x 170 45 x 237 With support frame support – – ◾ With PinBlock – – ◾ Support rails Qty/height mm 2 / 10 2 / 10 1 / 10 TS 45D TS 55D Support rail version TS 45C TS 45D-V TS 55D-V Width mm 45 55 45 Height mm 208 208 292 For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm 5/10 5/10 5/10 Model No. 1 pc(s). 9340.910 9340.930 9340.900 Product-specific supply scope Connector with connection facility for 3 main contacts ◾ ◾ – (1.5 – 4 mm²) Sub-unit with connection facilities for 3 main contacts (1.5 – 4 mm²) and 8 auxiliary contacts (0.5 – 2.5 mm²) – – ◾ including connectors Accessories Cable set see page see page see page 260 Support rails from page from page from page 259

224 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM supports

Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236

For mounting of switchgear with Material: Technical details: external power supply. – Polyamide (PA 6.6) Available on the Internet – Fire protection corresponding to UL 94-V0 Colour: – Chassis: RAL 7035

without contact system

Number of poles Packs of 3-pole 3-pole 3-pole Page With support frame mm 45 x 170 55 x 237 – With support frame support – ◾ – With PinBlock ◾ – – Support rails Qty/height mm – 1 / 10 2 / 10 Support rail version – TS 55D-V TS 45D Width mm 45 55 45 Height mm 208 272 208 Approvals UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm 5/10 5/10 5/10 Model No. 1 pc(s). 9340.260 9340.270 9340.300 Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 259 Support rails from page from page from page 259

Rittal Catalogue 34/Power distribution 225 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Circuit-breaker component adaptors

Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236

Material: Colour: Note: Technical details: – Polyamide (PA 6.6) – RAL 7035 – The technical data may vary for Available on the Internet – Fire protection corresponding UL applications to UL 94-V0 – Cable outlet: Switch outlet or as outgoing cable from the switchgear

Rated current max. 100 – 125 A, 3-pole

Packs Rated current max. A 100 100 125 125 Page of Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top Bottom Top Bottom Type of connection Box terminal Box terminal Box terminal Box terminal Connection of round conductors mm² 10 - 35 10 - 35 35 - 120 35 - 120 Clamping area for laminated copper bars, 10 x 7.8 10 x 7.8 18.5 x 15.5 18.5 x 15.5 W x H mm ABB (S2, T1, T1 UL, ABB (S2, T1, T1 UL, T2, T2 UL) T2, T2 UL) Allen Bradley (140-CMN) Allen Bradley (140-CMN) ABB (MS 497) ABB (MS 497) Eaton (NZM1, Eaton (NZM1, Eaton (PKZ2) Eaton (PKZ2) NZM1 UL, BZM B1) NZM1 UL, BZM B1) For switchgear make (model) Schneider Electric Schneider Electric GE (FD) GE (FD) (GV3ME80) (GV3ME80) OEZ (BC160N) OEZ (BC160N) Siemens (S3) Siemens (S3) Schneider Electric (NS80, Schneider Electric (NS80, NSC100, NSE75, NSE100) NSC100, NSE75, NS100) Siemens (3RV13 53, 3VT1) Siemens (3RV13 53, 3VT1) Terasaki (E125, S125) Terasaki (E125, S125) Width mm 72 72 90 90 Height mm 210 210 225 225 Approvals UL UL UL UL For bar systems with centre-to-centre 60 60 60 60 spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9342.400 9342.410 9342.540 9342.550 Product-specific supply scope Terminal cover – – ◾ ◾ Sliding blocks – – ◾ ◾ Accessories Support rails 35 x 15 mm 5 pc(s). 9320.120 9320.120 – – 261 Sliding blocks 6 pc(s). – – 9342.560 9342.560 261 Connection bracket 3 pc(s). – – 9342.570 9342.570 261 Insert strip – – – –

226 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Circuit-breaker component adaptors Rated current max. 160 – 250 A, 3-pole

Packs Rated current max. A 160 160 250 250 Page of Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top Bottom Top Bottom Type of connection Box terminal Box terminal – – Connection of round conductors mm² 35 - 120 35 - 120 – – Clamping area for laminated copper bars, W x H mm 18.5 x 15.5 18.5 x 15.5 – – ABB (S3, T3, T4, ABB (S3, T3, T4, T3 UL, T4 UL) T3 UL, T4 UL) Allen Bradley (140 U-J) Allen Bradley (140U-J) Eaton (NZM2, Eaton (NZM2, NZM2 UL, BZM B2) NZM2 UL, BZM B2) GE (FE 250) GE (FE 250) ABB (S2, T1, T2, ABB (S2, T1, T2, Mitsubishi Mitsubishi XT1, XT2) XT1, XT2) (NF125-SGW/HGW, (NF125-SGW/HGW, Allen Bradley Allen Bradley NF160-SGW/HGW) NF160-SGW/HGW) (140-CMN) (140-CMN) OEZ (BD250N, OEZ (BD250N, Eaton Eaton BD250S) BD250S) (NZM1, BZM B1) (NZM1, BZM B1) Schneider Electric Schneider Electric For switchgear make (model) GE (FD) GE (FD) (NS(X)100, NS(X)160, (NS(X)100, NS(X)160, OEZ (BC160N) OEZ (BC160N) NS(X)250, NSF150, NS(X)250, NSF150, Schneider Electric Schneider Electric NSF250, GV7) NSF250, GV7) (NS80, NSC100) (NS80, NSC100) Siemens (VL150 UL, Siemens (VL150 UL, Siemens Siemens VL150X UL, VL160, VL150X UL, VL160, (3RV13 53, 3VT1) (3RV13 53, 3VT1) VL160X, VL250, VL160X, VL250, Terasaki (E125, S125) Terasaki (E125, S125) VL250 UL, 3RV10 63, VL250 UL, 3RV10 63, 3RV13 63, 3RV13 63, 3RV13 64, 3VT2) 3RV13 64, 3VT2) Terasaki (L125, H125, Terasaki (L125, H125, S160, H160, L160, S160, H160, L160, E250, L250, H250) E250, L250, H250) Width mm 90 90 105 105 Height mm 215 215 240 240 Approvals – – – – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9342.500 9342.510 9345.600 9345.610 Product-specific supply scope Terminal cover ◾ ◾ – – Sliding blocks ◾ ◾ ◾ ◾ Connection straps – – ◾ ◾ Accessories Support rails 35 x 15 mm –––– Sliding blocks 6 pc(s). 9342.560 9342.560 9342.640 9342.640 261 Connection bracket 3 pc(s). 9342.570 9342.570 – – 261 Insert strip ––––

Rittal Catalogue 34/Power distribution 227 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Circuit-breaker component adaptors Rated current max. 400 – 630 A, 3-pole

Packs Rated current max. A 400 400 630 630 Page of Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top Bottom Top Bottom Type of connection – – – – Connection of round conductors – – – – Clamping area for laminated copper bars, W x H – – – – ABB (S5, T5, T5 UL) ABB (S5, T5, T5 UL) Allen Bradley (140U-L) Allen Bradley (140U-L) Eaton (NZM3, Eaton (NZM3, Eaton (NZM3, Eaton (NZM3, NZM3 UL/630 A) NZM3 UL/630 A) NZM3 UL/400 A) NZM3 UL/400 A) Mitsubishi (NF630- Mitsubishi (NF630- Mitsubishi (NF400- Mitsubishi (NF400- SEW/HEW/REW) SEW/HEW/REW) SEW/HEW/REW) SEW/HEW/REW) OEZ (BH630N, OEZ (BH630N, Schneider Electric Schneider Electric For switchgear make (model) BH630S) BH630S) (NS(X)400, NSJ400) (NS(X)400, NSJ400) Schneider Electric Schneider Electric Siemens (VL400, Siemens (VL400, (NS(X)630, NSJ600) (NS(X)630, NSJ600) VL400X UL, VL400 UL) VL400X UL, VL400 UL) Siemens Siemens Terasaki (E400, S400, Terasaki (E400, S400, (VL630, 3VT3, (VL630, 3VT3, H400, L400) H400, L400) 3V10 73, 3RV13 73, 3V10 73, 3RV13 73, 3RV13 74) 3RV13 74) Terasaki (E630, S630) Terasaki (E630, S630) Width mm 140 140 140 140 Height mm 345 345 345 345 Approvals UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9345.720 9345.730 9345.700 9345.710 Product-specific supply scope Connection straps ◾ ◾ ◾ ◾ Sliding blocks ◾ ◾ ◾ ◾ Accessories Support rails 35 x 15 mm –––– Sliding blocks –––– Connection bracket –––– Insert strip 4 pc(s). 9342.720 9342.720 9342.720 9342.720 261

228 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Circuit-breaker component adaptors

Busbar system Page 212 Connection adaptors Page 216

Material: Note: Technical details: – Polyamide (PA 6.6) – The technical data may vary for Available on the Internet – Fire protection corresponding UL applications to UL 94-V0 – Cable outlet: Switch outlet or as outgoing cable from the Colour: switchgear – RAL 7035

Rated current max. 160 – 250 A, 4-pole

Packs Rated current max. A 160 160 250 250 Page of Rated operating voltage V, ~ 690, 4~ 690, 4~ 690, 4~ 690, 4~ Number of poles 4-pole 4-pole 4-pole 4-pole Cable outlet Top Bottom Top Bottom Type of connection Box terminal Box terminal – – Connection of round conductors mm² 35 - 120 35 - 120 – – Clamping area for laminated copper bars, W x H mm 18.5 x 15.5 18.5 x 15.5 – – ABB (T3S/250 A, ABB (T3S/250 A, ABB (T1/160 A, ABB (T1/160 A, T4V/315 A) T4V/315 A) T2/160 A) T2/160 A) Eaton (NZM2-4/250 A) Eaton (NZM2-4/250 A) Eaton (NZM1-4/125 A, Eaton (NZM1-4/125 A, Schneider Electric Schneider Electric For switchgear make (model) BZM E1-4/100 A) BZM E1-4/100 A) (NS(X)100, NS(X)160, (NS(X)100, NS(X)160, Schneider Electric Schneider Electric NS(X)250) NS(X)250) (NSC100) (NSC100) Siemens (VL160X, Siemens (VL160X, VL160, VL250) VL160, VL250) Width mm 120 120 140 140 Height mm 277 277 310 310 Approvals UL UL – – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9342.504 9342.514 9345.604 9345.614 Product-specific supply scope Terminal cover ◾ ◾ – – Sliding blocks ◾ ◾ ◾ ◾ Connection straps – – ◾ ◾ Accessories Sliding blocks 6 pc(s). 9342.560 9342.560 9342.640 9342.640 261

Rittal Catalogue 34/Power distribution 229 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Circuit-breaker component adaptors Rated current max. 500 A, 4-pole

Packs Rated current max. A 500 500 500 500 Page of Rated operating voltage V, ~ 690, 4~ 690, 4~ 690, 4~ 690, 4~ Number of poles 4-pole 4-pole 4-pole 4-pole Cable outlet Bottom Bottom Bottom Bottom Type of connection – – – – Connection of round conductors – – – – Clamping area for laminated copper bars, W x H – – – – Schneider Electric Eaton For switchgear make (model) ABB (Tmax T5) Siemens (3VL400) (NS(X)400, NS(X)630) (NZM3-4-XKR130) Width mm 185 185 185 185 Height mm 300 300 300 300 Approvals – – – – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9345.704 9345.714 9345.724 9345.734 Product-specific supply scope Spacer rolls ◾ ◾ ◾ ◾ Connection screws ◾ ◾ ◾ ◾ Contact plates ◾ – – – Accessories Sliding blocks ––––

Perforex

see page 488 New

230 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptor with connection cables

Allocation of switchgear For make/model ABB Eaton Reversing Soft Reversing Soft MCB Starter MCB Starter starter starter starter starter , PSR12, PSR16, PSR25 PSR16, PSR12, , MS 325 + PSR25 MS 325 + PSR25 MS 116/132 MS 325 MS 450/451 MS 495/496/497 AF16 AF12, MS 116 + AF09, AF38 AF30, AF26, AF16, AF12, MS 132 + AF09, A50 MS 450 + A40, AF16 AF12, MS 116 + AF09, AF38 AF30, AF26, AF16, AF12, MS 132 + AF09, A50 MS 450 + A40, PSR9 PSR6, MS 116 + PSR3, MS 450 + PSR30 PKZM0 PKZM01 PKZM4 PKE12 PKE32 PKE65 M15 - + M7 MSC-D M32 - + M17 MSC-D 17-65 DILM + PKZM4 MSC M7 - M12 - DE ... M32 - M17 ... DE MSC - PKE 65 + DILM 65 MSC M7 - M12 - DE ... M32 - M17 ... DE MSC - PKE 65 + DILM 65 DS7-340 + 32 PKE 12, PKE DS7-340 + PKZ0 Construction width Construction width 45 54 55 70 45 45 70 90 90 45 45 55 45 45 55 45 45 55 45 45 55 45 45 55 90 90 45 45 140 110 Model No. Version Required quantity (pieces) Required quantity (pieces) OM adaptor 25 A, 9340.340 1 1 11 AWG 12, W = 45 mm OM adaptor 32 A, 9340.350 1 1 AWG 10, W = 45 mm OM adaptor 25 A, 9340.370 1 1 1 AWG 12, W = 45 mm OM adaptor 32 A, 9340.380 1 1 AWG 10, W = 45 mm OM adaptor 32 A, 9340.390 1 1 11 11 11 AWG 10, W = 45 mm OM adaptor 65 A, 9340.430 11 1 1 AWG 6, W = 55 mm OM adaptor 65 A, 9340.450 1 1 1 1 1 AWG 6, W = 55 mm OM adaptor 32 A, 9340.460 1 AWG 10, W = 55 mm OM support, 9340.260 1 1 1 1 45 x 208 mm OM support, 9340.270 1 55 x 272 mm Support rail TS45D, 9342.860 1 1 35 x 10 mm Support rail TS45D-V 9342.870 1 1 35 x 10 mm Insert strip, 9340.290 2 2 3 10 x 208 mm

9340.280 Connection pin 3 33 3 3

Rittal Catalogue 34/Power distribution 231 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptor with connection cables

Allocation of switchgear For make/model Siemens Schneider Electric Soft Reversing Reversing MCB Starter MCB Starter star- starter starter ter 3RV10 11... (S00) 11... 3RV10 (S0) 21... 3RV10 (S2) 31... 3RV10 terminal Screw (S00) 11... 3RV20 A 40 to up terminal (S0) screw 21... 3RV20 (S00) 3RA11 10... (S0) 3RA11 20... (S2) 3RA11 30... terminal (S00) Screw 3RA21 10... springclamp 3RV20 11...(S00S0) + Tension terminal (S00/S0) Screw 3RA21 20... terminal Screw (S0) 3RA21 20... 3RA61 20... (S00 + S00) 3RA12 10... (S0 + S0) 3RA11 20... + S2) (S2 + 3RT103... 31.. 3RV10 terminal (S00) Screw 3RA22 10... terminal Screw (S0) 3RA22 20... GV2ME (screw terminaland- tension spring clamp) P - GV2 L10 LE10, GV2 - RT, 65A GV3 BIS GV2 P + LC1D GV2 ME + LC1D GV2 - DM102 + LC1D/LC1K LC1D/LC1K DP + - GV2 GV3 + LC1D65 LUB 12 LUB 32 (AC) GV2 P + LC2D (AC) GV2 ME + LC2D/LC2K LC2D/LC2K + DM GV2 GV2 DP + LC2D/LC2K GV2 DP + LC2D/LC2K + ATS ME GV2 Construction width Construction width 45 45 55 45 45 45 45 55 45 45 45 45 45 90 90 90 45 55 45 55 45 45 45 45 55 45 45 90 90 90 90 90 45 100 120 Model No. Version Required quantity (pieces) Required quantity (pieces) OM adaptor 16 A, 9340.760 1 AWG 12, W = 45 mm OM adaptor 25 A, 9340.340 11 1 1 1 1 AWG 12, W = 45 mm OM adaptor 32 A, 9340.350 11 1 1111 111111 AWG 10, W = 45 mm OM adaptor 32 A, 9340.770 1 1 AWG 10, W = 45 mm OM adaptor 25 A, 9340.370 1 1 1 1 1 1 AWG 12, W = 45 mm OM adaptor 25 A, 9340.390 1 AWG 12, W = 45 mm OM adaptor 65 A, 9340.430 1 1 1 AWG 6, W = 55 mm OM adaptor 65 A, 9340.450 1 1 1 AWG 6, W = 55 mm OM adaptor 40 A, 9340.720 1 AWG 8, W = 55 mm OM support 9340.260 1 1 1 1 1111 45 x 208 mm OM support 9340.270 1 1 55 x 272 mm Insert strip 9340.290 11 10 x 208 mm

9340.280 Connection pin 3 3333 3 3333

PinBlock, 9342.800 11 1111 2 2222 W = 45 mm

9342.820 PinBlock PLUS 1 1111

232 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptor with tension spring clamps

Allocation of switchgear For make/model ABB Eaton Reversing Soft Reversing Soft MCB Starter MCB Starter starter starter starter starter , PSR12, PSR16, PSR25 PSR16, PSR12, , MS 325 + PSR25 MS 325 + PSR25 MS 116/132 MS 325 MS 450/451 MS 495/496/497 AF16 AF12, MS 116 + AF09, AF38 AF30, AF26, AF16, AF12, MS 132 + AF09, A50 MS 450 + A40, AF16 AF12, MS 116 + AF09, AF38 AF30, AF26, AF16, AF12, MS 132 + AF09, A50 MS 450 + A40, PSR9 PSR6, MS 116 + PSR3, MS 450 + PSR30 PKZM0 PKZM01 PKZM4 PKE12 PKE32 PKE65 M15 - + M7 MSC-D M32 - + M17 MSC-D 17-65 DILM + PKZM4 MSC M7 - M12 - DE ... M32 - M17 ... DE MSC - PKE 65 + DILM 65 MSC M7 - M12 - DE ... M32 - M17 ... DE MSC - PKE 65 + DILM 65 PKE 12 + DS7-340 PKE 32 + DS7-340 DS7-340 + PKZ0 Construction width Construction width 45 54 55 70 45 45 70 90 90 45 45 55 45 45 55 45 45 55 45 45 55 45 45 55 90 90 45 45 45 140 110 Model No. Version Required quantity (pieces) Required quantity (pieces) OM adaptor 32 A, 9340.530 1 1 1 1 11 1.5 – 6 mm², W = 45 mm OM adaptor 32 A, 9340.550 1 1 1 1 1 1.5 – 6 mm², W = 45 mm OM adaptor 32 A, 9340.560 1 1 11 11 111 1.5 – 6 mm², W = 45 mm OM adaptor 32 A, 9340.660 1 1.5 – 6 mm², W = 55 mm OM adaptor 65 A, 9340.630 11 1 1 2.5 – 16 mm², W = 55 mm OM adaptor 65 A, 9340.650 1 1 1 1 1 1 2.5 – 16 mm², W = 55 mm OM support 9340.260 1 1 1 1 45 x 208 mm OM support 9340.270 1 1 55 x 272 mm Insert strip 9340.290 2 2 3 10 x 208 mm 9340.280 Connection pin 3 33 3 33 Cable set 9340.860 3 3 3 33 3 3 3 3 3 AWG 12 Cable set 9340.870 3 3 3 3 3 3 3 3 3 3 3 AWG 10 Cable set 9340.890 33 3 3 3 3 3 3 3 3 AWG 6 Support rail TS45D, 9342.860 1 35 x 10 mm Support rail TS55D, 9342.930 1 35 x 10 mm

Rittal Catalogue 34/Power distribution 233 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com OM adaptor with tension spring clamps

Allocation of switchgear For make/model Siemens Schneider Electric Soft Reversing Reversing MCB Starter MCB Starter star- starter starter ter 3RV10 11... (S00) 11... 3RV10 (S0) 21... 3RV10 (S2) 31... 3RV10 terminal Screw (S00) 11... 3RV20 A 40 to up terminal (S0) screw 21... 3RV20 (S00) 3RA11 10... (S0) 3RA11 20... (S2) 3RA11 30... terminal (S00) Screw 3RA21 10... terminal (S00/S0) Screw 3RA21 20... terminal Screw (S0) 3RA21 20... (S00 + S00) 3RA12 10... (S0 + S0) 3RA11 20... + S2) (S2 + 3RT103... 31.. 3RV10 terminal (S00) Screw 3RA22 10... terminal Screw (S0) 3RA22 20... GV2ME (screw terminaland- tension spring clamp) P - GV2 L10 LE10, GV2 - RT, 65A GV3 BIS GV2 P + LC1D GV2 ME + LC1D GV2 - DM102 + LC1D/LC1K LC1D/LC1K DP + - GV2 GV3 + LC1D65 LUB 12 LUB 32 (AC) GV2 P + LC2D (AC) GV2 ME + LC2D/LC2K LC2D/LC2K + DM GV2 GV2 DP + LC2D/LC2K + ATS ME GV2 Construction width Construction width 45 45 55 45 45 45 45 55 45 45 45 90 90 90 45 55 45 55 45 45 45 45 55 45 45 90 90 90 90 45 100 120 Model No. Version Required quantity (pieces) Required quantity (pieces) OM adaptor 32 A, 9340.530 11 1 1 1 1 1 1 1.5 – 6 mm², W = 45 mm OM adaptor 32 A, 9340.550 1 1 11111 11 1111 1 111 1.5 – 6 mm², W = 45 mm OM adaptor 32 A, 9340.560 1 1.5 – 6 mm², W = 45 mm OM adaptor 65 A, 9340.630 1 1 1 2.5 –16 mm², W = 55 mm OM adaptor 65 A, 9340.650 1 1 1 2.5 –16 mm², W = 55 mm OM support 9340.260 1 1 11 1 45 x 208 mm OM support 9340.270 1 55 x 272 mm Insert strip 9340.290 1 10 x 208 mm

9340.280 Connection pin 3 33 3 333

Cable set 9340.860 3 3 3 3333 3 3 AWG 12 Cable set 9340.870 3 3 3 3 3 3 3333 333333 AWG 10 Cable set 9340.880 3 AWG 8 Cable set 9340.890 3 3 3 3 3 3 AWG 6

9342.820 PinBlock PLUS 1 1 1 111

234 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Bus-mounting fuse bases

235 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Bus-mounting fuse bases

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Technical details: – Bus-mounting fuse base: – RAL 7035 Available on the Internet Fibreglass-reinforced, thermo- Note: plastic polyester (PBT) – For the use of fuse inserts to – Contact hazard protection: EN 60 269-3 (DIN VDE 0636- Polyamide (PA 6.6) 301) – Fire protection corresponding to UL 94-V0

D 02-E 18 D 02-E 18 D II-E 27 D II-E 27 D III-E 33 D III-E 33 Fuse inserts Page (adaptor sleeve) (adaptor sleeve) (adaptor screw) (adaptor screw) (adaptor screw) (adaptor screw) Rated current max. A 63 63 25 25 63 63 400, 3~ 400, 3~ 500, 3~ 500, 3~ 690, 3~ 690, 3~ Rated operating voltage V, ~ 400 (DC) 400 (DC) 500 (DC) 500 (DC) 690 (DC) 690 (DC) Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Type of connection Box terminal Box terminal Box terminal Box terminal Box terminal Box terminal Connection of round conductors mm² 1.5 - 25 1.5 - 16 1.5 - 16 1.5 - 16 1.5 - 25 1.5 - 16 Width mm 27 41 42 56 57 71 Height mm 209 251 209 251 209 251 For bar systems with centre-to-centre 60 60 60 60 60 60 spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 5/10 5/10 Model No. 3418.010 3418.040 3427.010 3427.040 3433.010 3433.040 Packs of 10 pc(s). 5 pc(s). 10 pc(s). 5 pc(s). 10 pc(s). 5 pc(s). Pre-configured element ready for connection including cover plate, contact hazard protec- – ◾ – ◾ – ◾ tion and exterior connection clamps Also required Contact hazard protection cover plate 10 pc(s). 3418.020 – 3427.020 – 3433.020 – 262 Accessories Connection space extender 10 pc(s). 3418.030 – 3427.030 – 3433.030 – 262 Side covers 10 pc(s). 3093.010 – 3093.020 – 3093.020 – 262

236 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Bus-mounting fuse base D-Switch

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Supply includes: Note: Technical details: – Polyamide (PA 6) – Reducing retaining springs for – For the use of fuse inserts to Available on the Internet – Fire protection corresponding D 01 and 10 x 38 mm fuses EN 60 269-3 (DIN VDE 0636- to UL 94-V0 301) Basis of test: – With integral visual fuse moni- Colour: – IEC/DIN EN 60 947-3 toring via flashing indicator and – Chassis: RAL 7035 operating status display as well – Fuse holder: RAL 7001 as cable routing for conductors up to 6 mm²

D 01 (with retaining spring) Packs Fuse inserts D 02 (with Neozed adaptor sleeve) Page of 10 x 38 (with retaining spring) Rated operating current max. A 63 Rated operating voltage V, ~ 400, 3~ Number of poles 3-pole Voltage, indicator light V 100 - 400 Type of connection Box terminal Connection of round conductors mm² 1.5 - 25 Width mm 27 Height mm 226 For bar systems with centre-to-centre spacing mm 60 For bar thickness mm 5/10 Model No. 3 pc(s). 9340.950

Rittal Catalogue 34/Power distribution 237 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 000

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Basis of test: – Fibreglass-reinforced – Chassis: RAL 9011 – IEC/DIN EN 60 947-3 polyamide – Cover: RAL 7035 – DIN EN 60 269-2 (fuse inserts) – Fire protection corresponding Technical details: to UL 94-V0 Available on the Internet – Contact tracks: Silver-plated hard copper

Size 000, for mounting plate assembly Packs Size 000 Page of Rated operating current max. A 100 Rated operating voltage V, ~ 690, 3~ Number of poles 3-pole Cable outlet Top/bottom Type of connection Box terminal Connection of round conductors mm² 1.5 - 50 Clamping area for laminated copper bars, W x H mm 10 x 10 Width mm 89 Height mm 141.5 For mounting plate assembly ◾ Model No. 1 pc(s). 3431.000 Accessories Micro-switch 5 pc(s). 3071.000 263

238 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 000

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Basis of test: – Fibreglass-reinforced – Chassis: RAL 7035 – IEC/DIN EN 60 947-3 polyamide – Cover: RAL 7001 – DIN EN 60 269-2 (fuse inserts) – Fire protection corresponding Technical details: to UL 94-V0 Available on the Internet – Contact tracks: Silver-plated hard copper

Size 000 Size Packs of 000 000 000 Page Rated operating current max. A 100 100 100 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole Cable outlet Bottom Top Bottom Type of connection Box terminal Box terminal Box terminal Connection of round conductors mm² 2.5 - 50 2.5 - 50 2.5 - 50 Width mm 53 53 53 Height mm 213 213 213 With electronic fuse monitoring ◾ – – For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm 5/10 5/10 5/10 Model No. 1 pc(s). 3431.035 3431.020 3431.030 Accessories Micro-switch 5 pc(s). 3071.000 3071.000 3071.000 263

Rittal Catalogue 34/Power distribution 239 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Note: Technical details: – Polyamide (PA 6) – Chassis: RAL 7035 – The technical data may vary for Available on the Internet – Fire protection corresponding – Cover: RAL 7035/7001 UL applications. to UL 94-V0 Basis of test: – Contact tracks: Electrolytic – IEC/DIN EN 60 947-3 copper, silver-plated – DIN EN 60 269-2 (fuse inserts)

Size 00 Size Packs of 00 00 00 00 Page Rated operating current max. A 160 160 160 160 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 Connection of round conductors mm² 4 - 95 10 - 95 4 - 95 10 - 95 Connection of sector-shaped conductors – – – – Clamping area for laminated copper bars, W x H mm 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 Approvals UR UR UR UR For mounting plate assembly – – ◾ ◾ For bar systems with centre-to-centre spacing mm 60 60 – – For bar thickness mm 5/10 5/10 – – Model No. 1 pc(s). 9343.000 9343.010 9344.000 9344.010 Accessories Box terminals –––– Connection space cover 2 pc(s). 9344.520 9344.520 9344.520 9344.520 263 Arc chambers –––– Micro-switch 5 pc(s). 3071.000 3071.000 3071.000 3071.000 263 Laminated copper bars see page see page see page see page 255

240 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3 Size 1 Size Packs of 1 1 1 1 Page Rated operating current max. A 250 250 250 250 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M10 Box terminal Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 35 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – 50 - 150 – Clamping area for laminated copper bars, W x H mm 20 x 3 - 14 32 x 10 20 x 3 - 14 32 x 10 Width mm 184 184 184 184 Height mm 298 298 298 298 Approvals UR UR UR UR For mounting plate assembly – – ◾ ◾ For bar systems with centre-to-centre spacing mm 60 60 – – For bar thickness mm 5/10 5/10 – – Model No. 1 pc(s). 9343.100 9343.110 9344.100 9344.110 Accessories Box terminals 3 pc(s). – 9344.610 – 9344.610 263 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page see page 255

Size 2 – 3 Size Packs of 2 2 2 3 3 3 Page Rated operating current max. A 400 400 400 630 630 630 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M10 Screw M10 Box terminal Screw M10 Screw M10 Connection of round conductors mm² 95 - 300 10 - 240 10 - 240 95 - 300 10 - 300 10 - 300 Connection of sector-shaped conductors mm² 120 - 300 – – 120 - 300 – – Clamping area for laminated copper bars, W x H mm 32 x 10 - 20 50 x 10 50 x 10 32 x 10 - 20 50 x 10 50 x 10 Width mm 210 210 210 250 250 250 Height mm 298 298 298 298 298 298 Approvals UR UR UR UR UR UR For mounting plate assembly – – ◾ – – ◾ For bar systems with centre-to-centre spacing mm 60 60 – 60 60 – For bar thickness mm 5/10 5/10 – 5/10 5/10 – Model No. 1 pc(s). 9343.200 9343.210 9344.210 9343.300 9343.310 9344.310 Accessories Box terminals 3 pc(s). – 9344.620 9344.620 – 9344.620 9344.620 263 Connection space cover 2 pc(s). 9344.540 9344.540 9344.540 9344.550 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page see page see page see page 255

Rittal Catalogue 34/Power distribution 241 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Basis of test: – Polyamide (PA 6) – Chassis: RAL 7035 – IEC/DIN EN 60 947-3 – Fire protection corresponding – Cover: RAL 7035/7001 – DIN EN 60 269-2 (fuse inserts) to UL 94-V0 Technical details: – Contact tracks: Electrolytic Available on the Internet copper, silver-plated

Size 00, with electronic fuse monitoring Size Packs of 00 00 00 00 Page Rated operating current max. A 160 160 160 160 Rated operating voltage V, ~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 Connection of round conductors mm² 4 - 95 10 - 95 4 - 95 10 - 95 Connection of sector-shaped conductors – – – – Clamping area for laminated copper bars, W x H mm 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 For mounting plate assembly – – ◾ ◾ For bar systems with centre-to-centre spacing mm 60 60 – – For bar thickness mm 5/10 5/10 – – Model No. 1 pc(s). 9343.020 9343.030 9344.020 9344.030 Accessories Box terminals –––– Connection space cover 2 pc(s). 9344.520 9344.520 9344.520 9344.520 263 Arc chambers –––– Micro-switch 5 pc(s). 3071.000 3071.000 3071.000 3071.000 263 Laminated copper bars see page see page see page see page 255

242 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3 Size 1, with electronic fuse monitoring Size Packs of 1 1 1 Page Rated operating current max. A 250 250 250 Rated operating voltage V, ~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ Number of poles 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M10 Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – – Clamping area for laminated copper bars, W x H mm 20 x 3 - 14 32 x 10 32 x 10 Width mm 184 184 184 Height mm 298 298 298 For mounting plate assembly – – ◾ For bar systems with centre-to-centre spacing mm 60 60 – For bar thickness mm 5/10 5/10 – Model No. 1 pc(s). 9343.120 9343.130 9344.130 Accessories Box terminals 3 pc(s). – 9344.610 9344.610 263 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page 255

Size 2 – 3, with electronic fuse monitoring Size Packs of 2 2 3 3 Page Rated operating current max. A 400 400 630 630 Rated operating voltage V, ~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M10 Screw M10 Screw M10 Screw M10 Connection of round conductors mm² 10 - 240 10 - 240 10 - 300 10 - 300 Connection of sector-shaped conductors – – – – Clamping area for laminated copper bars, W x H mm 50 x 10 50 x 10 50 x 10 50 x 10 Width mm 210 210 250 250 Height mm 298 298 298 298 For mounting plate assembly – ◾ – ◾ For bar systems with centre-to-centre spacing mm 60 – 60 – For bar thickness mm 5/10 – 5/10 – Model No. 1 pc(s). 9343.230 9344.230 9343.330 9344.330 Accessories Box terminals 3 pc(s). – – 9344.620 9344.620 263 Connection space cover 2 pc(s). 9344.540 9344.540 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page see page 255

Rittal Catalogue 34/Power distribution 243 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Size 00, with electromechanical fuse monitoring Size Packs of 00 00 00 00 Page Rated operating current max. A 160 160 160 160 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 Connection of round conductors mm² 4 - 95 10 - 95 4 - 95 10 - 95 Connection of sector-shaped conductors – – – – Clamping area for laminated copper bars, W x H mm 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 For mounting plate assembly – – ◾ ◾ For bar systems with centre-to-centre spacing mm 60 60 – – For bar thickness mm 5/10 5/10 – – Model No. 1 pc(s). 9343.040 9343.050 9344.040 9344.050 Accessories Box terminals –––– Connection space cover 2 pc(s). 9344.520 9344.520 9344.520 9344.520 263 Arc chambers –––– Micro-switch 5 pc(s). 3071.000 3071.000 3071.000 3071.000 263 Laminated copper bars see page see page see page see page 255

244 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH fuse-switch disconnectors, size 00 to 3 Size 1, with electromechanical fuse monitoring Size Packs of 1 1 1 Page Rated operating current max. A 250 250 250 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M10 Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – – Clamping area for laminated copper bars, W x H mm 20 x 3 - 14 32 x 10 32 x 10 Width mm 184 184 184 Height mm 298 298 298 For mounting plate assembly – – ◾ For bar systems with centre-to-centre spacing mm 60 60 – For bar thickness mm 5/10 5/10 – Model No. 1 pc(s). 9343.140 9343.150 9344.150 Accessories Box terminals 3 pc(s). – 9344.610 9344.610 263 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page 255

Size 2 – 3, with electromechanical fuse monitoring Size Packs of 2 2 3 3 Page Rated operating current max. A 400 400 630 630 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M10 Screw M10 Screw M10 Screw M10 Connection of round conductors mm² 10 - 240 10 - 240 10 - 300 10 - 300 Connection of sector-shaped conductors – – – – Clamping area for laminated copper bars, W x H mm 50 x 10 50 x 10 50 x 10 50 x 10 Width mm 210 210 250 250 Height mm 298 298 298 298 For mounting plate assembly – ◾ – ◾ For bar systems with centre-to-centre spacing mm 60 – 60 – For bar thickness mm 5/10 – 5/10 – Model No. 1 pc(s). 9343.250 9344.250 9343.350 9344.350 Accessories Box terminals 3 pc(s). 9344.620 9344.620 9344.620 9344.620 263 Connection space cover 2 pc(s). 9344.540 9344.540 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 Laminated copper bars see page see page see page see page 255

Rittal Catalogue 34/Power distribution 245 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH slimline fuse-switch disconnectors, size 00 to 3

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Basis of test: – Fibreglass-reinforced – Chassis: RAL 7035 – IEC/DIN EN 60 947-3 polyamide – Cover: RAL 7001 – DIN EN 60 269-2 (fuse inserts) – Fire protection corresponding – Handle: RAL 7016 Technical details: to UL 94-V0 Available on the Internet – Contact tracks: Silver-plated hard copper

Size 00 Size Packs of 00 00 00 00 00 Page Rated operating current max. A 160 160 160 160 160 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 Screw M8 Connection of round conductors mm² 2.5 - 95 2.5 - 95 2.5 - 95 2.5 - 95 2.5 - 95 Width mm 50 50 50 50 50 Height mm 400 400 400 400 400 For converter installation – – – – ◾ For bar systems with centre-to-centre spacing mm 60 60 100 100 100 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9346.000 9346.010 9346.020 9346.030 9346.060 Product-specific supply scope 3 mounting hooks ◾ ◾ ◾ ◾ – Accessories Connection space cover 1 pc(s). 9346.460 9346.460 9346.460 9346.460 9346.460 264 Clamp-type terminal connection 1 set(s) – 3592.010 – 3592.010 3592.010 264 Box terminals ––––– Busbar terminal – – – – – Micro-switch 5 pc(s). 9346.400 9346.400 9346.400 9346.400 9346.400 263 Current converter – – – – – Cable ties – – – – – Inserted screw nuts M12 – – – – –

246 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH slimline fuse-switch disconnectors, size 00 to 3 Size 00 – 3 Size Packs of 00 00 1 2 3 Page Rated operating current max. A 160 160 250 400 630 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M8 Screw M8 Bolt M12 Bolt M12 Bolt M12 Connection of round conductors mm² 2.5 - 95 2.5 - 95 6 - 240 6 - 240 6 - 240 Width mm 50 50 100 100 100 Height mm 740 740 740 740 740 For converter installation – ◾ ◾ ◾ ◾ For bar systems with centre-to-centre spacing mm 185 185 185 185 185 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9346.040 9346.050 9346.110 9346.210 9346.310 Product-specific supply scope 3 screws M12 x 30 for equipment attachment – – ◾ ◾ ◾ 3 inserted screw nuts M12 – – ◾ ◾ ◾ 3 hex nuts for conductor connection – – ◾ ◾ ◾ Accessories Connection space cover – – – – – Clamp-type terminal connection 1 set(s) 3592.010 3592.010 – – – 264 Box terminals 3 pc(s). – – 9346.450 9346.450 9346.450 264 Busbar terminal 3 pc(s). 9346.470 9346.470 9346.440 9346.440 9346.440 264 Micro-switch 5 pc(s). 9346.400 9346.400 3071.000 3071.000 3071.000 263 Current converter – see page see page see page see page 265 Cable ties 1 pc(s). – – 9346.480 9346.480 9346.480 265 Inserted screw nuts M12 30 pc(s). – – 3591.060 3591.060 3591.060 253

Ri4Power ISV distribution enclosures

see page 297 New

Rittal Catalogue 34/Power distribution 247 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com NH slimline fuse-switch disconnectors, size 00 to 3

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Basis of test: – Fibreglass-reinforced – Chassis: RAL 7035 – IEC/DIN EN 60 947-3 polyamide – Cover: RAL 7001 – DIN EN 60 269-2 (fuse inserts) – Fire protection corresponding – Handle: RAL 7016 Technical details: to UL 94-V0 Available on the Internet – Contact tracks: Silver-plated hard copper

Size 00 – 3, with electronic fuse monitoring Size Packs of 00 1 2 3 Page Rated operating current max. A 160 250 400 630 Rated operating voltage V, ~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M8 Bolt M12 Bolt M12 Bolt M12 Connection of round conductors mm² 2.5 - 95 6 - 240 6 - 240 6 - 240 Width mm 50 100 100 100 Height mm 400 740 740 740 For converter installation – ◾ ◾ ◾ For bar systems with centre-to-centre spacing mm 60 185 185 185 For bar thickness mm 5/10 5/10 5/10 5/10 Model No. 1 pc(s). 9346.015 9346.115 9346.215 9346.315 Product-specific supply scope 3 mounting hooks ◾ – – – 3 screws M12 x 30 for equipment attachment – ◾ ◾ ◾ 3 inserted screw nuts M12 – ◾ ◾ ◾ 3 hex nuts for conductor connection – ◾ ◾ ◾ Accessories Connection space cover 1 pc(s). 9346.460 – – – 264 Clamp-type terminal connection 1 set(s) 3592.010 – – – 264 Box terminals 3 pc(s). – 9346.450 9346.450 9346.450 264 Busbar terminal 3 pc(s). – 9346.440 9346.440 9346.440 264 Micro-switch 5 pc(s). 9346.400 3071.000 3071.000 3071.000 263 Current converter – see page see page see page 265 Cable ties 1 pc(s). – 9346.480 9346.480 9346.480 265 Inserted screw nuts M12 30 pc(s). – 3591.060 3591.060 3591.060 253

248 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Fuse holder

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Note: Approvals: – Polyamide (PA 6) – For snap-on mounting on – UL 512, CSA C22.2 No.39 – Fire protection corresponding 35 mm (7.5 mm/15 mm high) Technical details: to UL 94-V0 support rails to DIN EN 60 715 Available on the Internet or RiLine component adaptor Colour: combinations (OM adaptors/ – RAL 7035 supports)

Rated operating current max. 30 – 60 A Fuse type (class) CC J J Page Rated operating current max. A 30 30 60 Rated operating voltage V, ~ 600, 3~ 600, 3~ 600, 3~ Number of poles 3-pole 3-pole 3-pole Fuse standard UL 4248-4 UL 4248-8 UL 4248-8 Fuse size mm 10 x 38 21 x 57 27 x 60 Connection of round conductors mm² 2.5 - 10 2.5 - 25 2.5 - 25 Connection of round conductors AWG 6 – AWG 14 AWG 2 – AWG 14 AWG 2 – AWG 14 Width mm 52.5 97.5 120 Height mm 78 114 122 Depth mm 59 80 89 Approvals UL UL UL Model No. 9345.000 9345.010 9345.030 Packs of 4 pc(s). 2 pc(s). 2 pc(s).

Rittal Catalogue 34/Power distribution 249 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Fuse holder

Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226

Material: Colour: Approvals: – Polyamide (PA 6) – Chassis: RAL 7035 – UL 4248-1 – Fire protection corresponding – Cover: RAL 7035/7001 – UL 4248-8 to UL 94-V0 – CSA C22.2 No. 4248.1-07 – Contact tracks: Electrolytic – CSA C22.2 No. 4248.8-07 copper, silver-plated Technical details: Available on the Internet

Rated operating current max. 100 – 400 A Fuse type (class) Packs of J J J Page Rated operating current min. A 61 101 201 Rated operating current max. A 100 200 400 Rated operating voltage V, ~ 600, 3~ 600, 3~ 600, 3~ Number of poles 3-pole 3-pole 3-pole Fuse standard UL 4248-8 UL 4248-8 UL 4248-8 Fuse size mm 29 x 118 41 x 146 54 x 181 Cable outlet Top/bottom Top/bottom Top/bottom Type of connection Box terminal Box terminal Box terminal Connection of round conductors AWG 2 – MCM 300 AWG 3/0 – MCM 600 AWG 3/0 – MCM 600 Width mm 184 210 250 Height mm 288 288 328 Approvals UR UR UR For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm 5/10 5/10 5/10 Model No. 1 pc(s). 9345.100 9345.200 9345.400

250 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Busbar supports/base isolators

Busbar support Note: 9340.030/9342.030 1 and 2-pole – The busbar supports may be bayed with 60 mm Material: bar centre distance for the configuration of multi- – Polyamide (PA 6.6) pole systems – Fire protection corresponding to UL 94-V0 Technical details: Colour: Available on the Internet – RAL 7035 1 Supply includes: 9342.030 – Raised section for stepped configuration of the PLS busbars

Version Packs of Page Number of poles 1-pole 1-pole 2-pole Bar centre distance mm – – 60 2 PLS 1600 – – 253 For busbars E-Cu 12 x 5/101), – 12 x 5 – 30 x 10 mm 252 15 x 5 – 30 x 10 mm 1000, 1~ 1000, 1~ 1000, 2~ Rated operating voltage V, ~ 1500 (DC) 1500 (DC) – PEN/N/PE support ◾ ◾ ◾ N/PE support – – ◾ Model No. 4 pc(s). 9342.030 9340.030 9340.040 Accessories Spacers 12 pc(s). – 9340.090 – 251 Captive nuts M52) 50 pc(s). – 4166.000 4166.000 624 1) If 12 x 5/10 mm busbars are used, the spacer 9340.090 is additionally required 2) For attaching the busbar support to the TS frame section and punched sections with mounting flanges with rectangular system punchings 12.5 x 10.5 mm

Base isolators Rated operating voltage kV 1 1 For configuring busbar systems with any given bar Tensile strength kN 12 13 centre distances and for assembling insulated PE or Torsional strength Nm 75 90 PEN busbars. Bending strength kN 6 6 Material: Height mm 40 50 – Duroplastic polyester (UP resin) Thread M10 M10 Technical details: Packs of 6 pc(s). 6 pc(s). Available on the Internet Model No. 3031.000 3032.000

Spacers Packs of Model No. for RiLine busbar supports (flat bar system) 12 pc(s). 9340.090 For adapting 12 x 5 and 12 x 10 mm size busbars. For busbar supports ◾ 9340.030 (1-pole), see page 251 ◾ 9340.000/.010 (3-pole), see page 212 ◾ 9340.004 (4-pole), see page 212 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035

Rittal Catalogue 34/Power distribution 251 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Busbars

Dimensions Rated current1) CUPONAL busbars Packs of Model No. mm A To DIN EN 13 601 20 x 5 235 6 pc(s). 3582.020 Length: 2400 mm/bar 20 x 10 363 3 pc(s). 3585.020 Copper-coated aluminium busbars, suitable for the 30 x 5 328 6 pc(s). 3584.020 configuration of busbar systems with busbar sup- 30 x 10 493 3 pc(s). 3586.020 ports 9340.000/9340.050, see page 212. 1) Current carrying capacity at 65°C bar temperature Material: and 35°C ambient temperature – Aluminium core with crimped copper coating Correction factor diagram to DIN 43 671 made from E-Cu Short-circuit resistance diagrams

60 55 b 50

35 a

30 Ip peak short-circuit current [kA] [kA] current short-circuit peak Ip 25

200 250 400350300 450 500 Busbar support spacing [mm]

CUPONAL busbars Busbar support Curve mm 20 x 5/10 9340.000/.050a 30 x 5/10 9340.000/.050b

Busbars E-Cu Technical details: Available on the Internet To DIN EN 13 601 Length: 2400 mm/bar Material: E-Cu F30

Dimensions Approvals Packs of Model No. Page mm 12 x 5 6 pc(s). 3580.000 15 x 5 6 pc(s). 3581.000 20 x 5 6 pc(s). 3582.000 25 x 5 6 pc(s). 3583.000 30 x 5 6 pc(s). 3584.000 12 x 10 6 pc(s). 3580.100 15 x 10 6 pc(s). 3581.100 20 x 10 3 pc(s). 3585.005 30 x 10 3 pc(s). 3586.005 40 x 10 – 3 pc(s). 3587.000 50 x 10 – 2 pc(s). 3588.005 60 x 10 – 2 pc(s). 3589.005 80 x 10 – 1 pc(s). 3590.005 100 x 10 – 1 pc(s). 3590.015 Accessories Busbar connectors 12 x 5 – 15 x 10 (single connection) 3 pc(s). 9350.075 254 for busbars 20 x 5 – 30 x 10 (single connection) 3 pc(s). 9320.020 254 mm 20 x 5 – 30 x 10 (bayed connection) 3 pc(s). 9320.030 254 12/15 x 5 4 pc(s). 9350.010 253 Busbar cover sections 12/15 x 10 4 pc(s). 9350.060 253 for busbars mm 12 x 5 – 30 x 10 10 pc(s). 3092.000 253 40 – 60 x 10 10 pc(s). 3085.000 253

252 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Busbars

Busbar cover sections Note: – Contact hazard protection, alternative solutions, Contact hazard protection via covering of the see page 256 busbars. May be cut to required length. Technical details: Length: 1000 mm/section Available on the Internet Material: – Thermally modified hard PVC – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035

For busbars Approvals Packs of Model No. mm 12/15 x 5 – 4 pc(s). 9350.010 12/15 x 10 – 4 pc(s). 9350.060 12 x 5 – 30 x 10 10 pc(s). 3092.000 40 – 60 x 10 10 pc(s). 3085.000

Inserted screw nuts M12 Packs of Model No. Self-holding nuts with knurled ring for busbars E-Cu. 30 pc(s). 3591.060 Hole diameter: 14.5 mm

PLS special busbars E-Cu Technical details: Available on the Internet

For system PLS 800, bar thickness 5 mm, bar cross-section 300 mm2 For enclosure width Length Approvals Packs of Model No. Page mm mm 600 495 3 pc(s). 3524.000 800 695 3 pc(s). 3525.000 1000 895 3 pc(s). 3525.010 1200 1095 3 pc(s). 3526.000 variable 2400 1 pc(s). 3509.000 Accessories PLS busbar connector (single connection) 3 pc(s). 3504.000 254 PLS busbar connector (bayed connection) 3 pc(s). 3505.000 254 PLS expansion connector 3 pc(s). 9320.060 254

For system PLS 1600, bar thickness 10 mm, bar cross-section 900 mm2 For enclosure width Length Approvals Packs of Model No. Page mm mm 600 495 3 pc(s). 3527.000 800 695 3 pc(s). 3528.000 1000 895 3 pc(s). 3528.010 1200 1095 3 pc(s). 3529.000 variable 2400 1 pc(s). 3516.000 Accessories PLS busbar connector (single connection) 3 pc(s). 3514.000 254 PLS busbar connector (bayed connection) 3 pc(s). 3515.000 254 PLS expansion connector 3 pc(s). 9320.070 254

Rittal Catalogue 34/Power distribution 253 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Busbars

Busbar connectors Technical details: Available on the Internet For connecting square busbars, no drilling required. Material: 9350.075 – Top piece: St 37, nickel-plated surface finish – Contact plate: E-Cu, nickel-plated surface finish 9320.020/9320.030 – Top piece: Sheet steel, zinc-plated, passivated – Contact plate: E-Cu, silver-plated

Application For busbars Approvals Packs of Model No. mm Single Bayed connection connection1) 12 x 5 – 15 x 10 ◾ – 3 pc(s). 9350.075 ◾ – 3 pc(s). 9320.020 20 x 5 – 30 x 10 – ◾ 3 pc(s). 9320.030 1) Connection from enclosure to enclosure

PLS busbar connectors Technical details: Available on the Internet For connecting the PLS special busbars; no drilling required. Material: –E-Cu Surface finish: – Nickel-plated

Application For system Approvals Packs of Model No. PLS 800 3 pc(s). 3504.000 Single connection PLS 1600 3 pc(s). 3514.000 PLS 800 3 pc(s). 3505.000 Bayed connection1) PLS 1600 3 pc(s). 3515.000 1) Connection from enclosure to enclosure

PLS expansion connector Note: – At a temperature increase of 30 K, there is an For thermal and mechanical compensation during expansion in the length of the busbars by approx- connection of PLS special busbars from enclosure imately 0.5 mm/m. For this reason, it is advisable to enclosure. to use an expansion connector for thermal com- Material: pensation in busbar systems with busbar sec- –E-Cu tions > 3600 mm. Technical details: Available on the Internet

Expansion connector For system Approvals Packs of Model No. Page PLS 800 3 pc(s). 9320.060 PLS 1600 3 pc(s). 9320.070 Also required PLS 800 3 pc(s). 3504.000 254 PLS busbar connectors1) PLS 1600 3 pc(s). 3514.000 254 1) Two busbar connectors are needed to fit one expansion connector

254 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Busbars

Laminated copper bars Technical details: Available on the Internet Length: 2000 mm/bar Material: Cu lamina – High-purity electrolyte copper F20

Insulation – High-strength vinyl compound – Expansion 370% – Temperature range: -30°C…+105°C – Fire protection corresponding to UL 94-V0 – Dielectric strength: 20 kV/mm

Configuration1) I at 70 K2) I at 50 K2) I at 30 K2) n n n Packs of Model No. mm A A A 6 x 9 x 0.8 285 240 180 1 pc(s). 3565.005 6 x 15.5 x 0.8 415 350 265 1 pc(s). 3568.005 10 x 15.5 x 0.8 575 480 365 1 pc(s). 3569.005 5 x 20 x 1 525 435 330 1 pc(s). 3570.005 5 x 24 x 1 605 510 385 1 pc(s). 3571.005 10 x 24 x 1 920 770 585 1 pc(s). 3572.005 5 x 32 x 1 770 645 485 1 pc(s). 3573.005 10 x 32 x 1 1155 965 730 1 pc(s). 3574.005 5 x 40 x 1 930 780 590 1 pc(s). 3575.005 10 x 40 x 1 1370 1145 865 1 pc(s). 3576.005 5 x 50 x 1 1125 940 710 1 pc(s). 3577.005 10 x 50 x 1 1635 1365 1030 1 pc(s). 3578.005 10 x 63 x 1 1950 1610 1230 1 pc(s). 3579.005 1) Number of lamina x lamina width x lamina thickness 2) The conductor temperature of the laminated copper bar is derived by adding the ambient temperature and the temperature increase together Example: 3565.005 carrying 180 A, i.e. the temperature increases by 30 K. At an ambient temperature of 35°C this produces a resultant conductor temperature of 35°C + 30 K = 65°C

Universal support Packs of Model No. For the attachment of laminated copper bars from 3 pc(s). 3079.000 5 x 20 x 1 to 10 x 63 x 1 mm. Material: – Fibreglass-reinforced, thermoplastic polyester Accessories: (PBT) – Fire protection corresponding to UL 94-V0 – PS punched rails, see page 610 Colour: Technical details: – RAL 7035 Available on the Internet Supply includes: – Screws and sliding nuts for mounting on PS punched rails

Universal support Packs of Model No. For the attachment of multi-stacked laminated 3 set(s) 3079.010 copper bars from 5 x 40 x 1 to 10 x 100 x 1 mm. Material: Note: – Fibreglass-reinforced, thermoplastic polyester – 3 sets of universal supports correspond to the (PBT) supply scope shown in the photograph – Fire protection corresponding to UL 94-V0 Colour: Accessories: – RAL 7035 – C rails 30/15, see page 612 Supply includes: – Screws and sliding nuts for mounting on C rails

Rittal Catalogue 34/Power distribution 255 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Contact hazard protection

System components Technical details: Available on the Internet Material: – Thermally modified hard PVC – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035

3-pole 4-pole For RiLine busbar systems PLS 1600 Flat bars PLS 800 PLS 1600 Flat bars PLUS Base trays Packs Length (L) mm Approvals Model No. Model No. of 500 2 pc(s). 9340.100 9341.100 9342.100 – – 700 2 pc(s). 9340.110 9341.110 9342.110 – – 900 2 pc(s). 9340.120 9341.120 9342.120 – – 1 1100 2 pc(s). 9340.130 9341.130 9342.130 9340.134 9342.134 2400 1 pc(s). 9340.170 9341.170 9342.170 – – Base tray infills 100 2 pc(s). 9340.140 9341.140 9342.140 – – Cover sections 700 2 pc(s). 9340.200 9340.200 9340.200 – – 1100 2 pc(s). 9340.210 9340.210 9340.210 9340.214 9340.214

Base tray Base tray infill Cover section 2 For rear contact hazard protection For rear contact hazard protection when May be cut to length as required; of the flat bar assembly. connecting the busbars from enclosure for clip-on mounting to the base tray. to enclosure. Note: Supply includes: If the cover section is loaded from the Assembly parts front, the support panel is needed for stability.

For system Support panels Approvals Packs of Model No. configuration for cover section To prevent side access to the cover section. The 3-pole 5 pc(s). 9340.220 support panel also provides additional stability. 4-pole 5 pc(s). 9340.224 Recommended mounting distance: ≤ 500 mm Material: Technical details: – Polyamide (PA 6.6) Available on the Internet – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035

Length Cross members Approvals Packs of Model No. mm for RiLine busbar connections 3-pole 160 2 pc(s). 9340.230 To comply with the clearances required for “feeder circuits” under UL 508. For flat bar systems with 60 mm bar centre distance and PLS 800/1600. Also required: Material: – Support panel 9340.220, see page 256 – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – RAL 7035 Note: – Two cross members are required for one busbar connection

256 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Connection system

Conductor connection clamps Accessories: Material: 3450.500 – 3459.500 – Laminated copper bars, see page 255 – Sheet steel, zinc-plated, passivated Technical details: 3550.000/3555.000 Available on the Internet – Brass

Connection of Clamping area for For bar thickness round conductors laminated copper bars, Approvals Packs of Model No. mm mm2 W x H mm 3 – 5 1 – 4 – 15 pc(s). 3550.000 5 1 – 4 – 15 pc(s). 3450.500 5 2.5 – 16 8 x 8 15 pc(s). 3451.500 5 16 – 50 10.5 x 11 15 pc(s). 3452.500 5 35 – 70 16.5 x 15 15 pc(s). 3453.500 5 70 – 185 22.5 x 20 15 pc(s). 3454.500 6 – 10 1 – 4 – 15 pc(s). 3555.000 10 1 – 4 – 15 pc(s). 3455.500 10 2.5 – 16 8 x 8 15 pc(s). 3456.500 10 16 – 50 10.5 x 11 15 pc(s). 3457.500 10 35 – 70 16.5 x 15 15 pc(s). 3458.500 10 70 – 185 22.5 x 20 15 pc(s). 3459.500

Plate clamps Clamping area for For busbars laminated Packs of Model No. For connecting laminated copper bars; no drilling mm copper bars, required. W x H mm 12 x 5 – Material: 34 x 10 3 pc(s). 3554.000 – Sheet steel 30 x 10 40 x 10 34 x 10 3 pc(s). 3559.000 Surface finish: – Zinc-plated, passivated 50 x 10 34 x 10 3 pc(s). 3560.000 50 x 10 54 x 10 3 pc(s). 3562.000 Accessories: 60 x 10 34 x 10 3 pc(s). 3561.000 60 x 10 54 x 10 3 pc(s). 3563.000 – Laminated copper bars, see page 255 80 x 10 65 x 10 3 pc(s). 3460.500 Technical details: Available on the Internet

System covers Note: – For 3-pole systems with 60/100 mm bar centre For conductor connection clamps and plate clamps. distance Material: – Only suitable for use with systems without a base –ABS tray – Fire protection corresponding to UL 94-V0 – For systems with a base tray, the system covers must be mechanically shortened Colour: – RAL 7035 Technical details: Available on the Internet

Height mm Width Depth For mounting on bar systems Approvals Packs of Model No. mm mm 60 mm 100 mm 50 80 230 325 4 pc(s). 3086.000 100 80 230 325 4 pc(s). 3087.000 100 110 230 325 4 pc(s). 3090.000 200 80 230 325 4 pc(s). 3088.000 200 110 230 325 4 pc(s). 3091.000

Rittal Catalogue 34/Power distribution 257 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories Connection system/Mini-PLS component adaptors

Connection block Note: – When using the terminal on 2-pole busbar sys- Material: tems, the terminal must be rotated through 180° Chassis for connection to the PE busbar – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Cover –ABS – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Supply includes: – 3 terminals including cover

Rated current max. A Packs of 800 1600 Page Rated operating voltage V, ~ 690, 1~ 690, 1~ Rated operating voltage (L1 + L2) V 1000 (DC) 1000 (DC) Rated operating voltage (L1 + L3) V 1500 (DC) 1500 (DC) Cable outlet Top/bottom Top/bottom Connection of round conductors, 95 – 185 – fine wire with wire end ferrule mm² Connection of round conductors, 90 – 300 – multi-wire mm² Clamping area for laminated copper bars 33 x 26 65 x 27 (with 5 mm bar thickness) W x H mm Clamping area for laminated copper bars 33 x 21 65 x 22 (with 10 mm bar thickness) W x H mm Width mm 50 85 Height mm 88 88 For bar thickness mm 5/10 5/10 Model No. 3 pc(s). 9342.311 9342.321 Accessories Laminated copper bars ◾ ◾ 255

Width Insert strips Packs of Model No. mm for Mini-PLS component adaptors To extend the construction width. 92 pc(s).9623.000 Material: –ABS Colour: – RAL 7035

Width Support rails 35 x 7.5 mm Packs of Model No. mm for Mini-PLS component adaptors 45 10 pc(s). 9320.150 Material: 54 10 pc(s). 3548.000 – Sheet steel 72 10 pc(s). 3549.000 Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard

258 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for OM adaptor/support

Support rails 35 x 10 mm Supply includes: – Assembly screws for OM adaptor/support For attaching to the adaptor section and support Note: frame. – UL approval in conjunction with OM adaptor/ support Material: – Polyamide (PA 6.6) Colour: – RAL 9005 Width Version With anti-slip guard1) Packs of Model No. mm TS 45C 45 ◾ 5 pc(s). 9342.850 TS 45D 45 – 5 pc(s). 9342.860 TS 45D-V2) 45 – 5 pc(s). 9342.870 TS 55C 55 ◾ 5 pc(s). 9342.920 TS 55D 55 – 5 pc(s). 9342.930 TS 55D-V2) 55 – 5 pc(s). 9342.940 1) Anti-slip guard for motor circuit-breaker 2) Support rail only suitable for non-pitch pattern-dependent mounting on support frame

Width Support rails 35 x 15 mm Packs of Model No. mm for OM adaptor/support For attaching to the adaptor section 45 5 pc(s). 9342.880 55 5 pc(s). 9342.950 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard

Width Support rails 35 x 7.5 mm Packs of Model No. mm for OM adaptor/support For assembly on 55 mm wide OM adaptors/sup- 72 5 pc(s). 9342.980 ports with 10 mm wide insert strips mounted on the right and left. Arrangement of the mounting hole for central configuration on 55 mm wide adaptor section or support frame. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard

Width Insert strips Approvals Packs of Model No. mm for OM adaptor/support To extend the construction width in a 10 mm pitch 10 2 pc(s). 9340.290 pattern. May be bayed as often as required on both sides. With integral cable duct. Material: – Polyamide (PA 6.6) Colour: – RAL 7035 Supply includes: – 6 connection pins

Rittal Catalogue 34/Power distribution 259 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for OM adaptor/support

Connection pin Approvals Packs of Model No. For any required mechanical connection of 20 pc(s). 9340.280 OM adaptor/support and insert strip 9340.290. Material: – Polyamide (PA 6) Colour: – RAL 5010

For support frame width PinBlock Packs of Model No. mm for support frames For secure attachment and positioning of the con- 45 5 pc(s). 9342.800 tactor on motor starter combinations, for simple 55 5 pc(s). 9342.810 clip-on mounting onto the support frame. Individual vertical positioning is achieved by relocating the Pin- Block. Note: – UL approval in conjunction with OM adaptor/ Material: support – Polyamide (PA 6.6) Colour: Accessories: – RAL 9005 – PinBlock Plus, see page 260

PinBlock Plus Packs of Model No. for starters with increased contactor 5 pc(s). 9342.820 attachment Mounted by simply clipping onto the PinBlock 9342.800/.810. Note: – UL approval in conjunction with OM adaptor/ Material: support – Polyamide (PA 6.6) Colour: – RAL 9005

Cable set Version Packs of Model No. AWG 14 = Pre-assembled connection cables for individual 15 pc(s). 9340.850 connection of switchgear, top-mounted on OM 2.08 mm2 ≙ 2.5 mm2 AWG 12 = adaptors with tension spring clamps, or for wiring 15 pc(s). 9340.860 between the individual switchgear units. 3.31 mm2 ≙ 4 mm2 AWG 10 = 15 pc(s). 9340.870 Length: 130 mm 5.26 mm2 ≙ 6 mm2 Material: AWG 8 = 6 pc(s). 9340.880 – PVC insulation 8.37 mm2 ≙ 10 mm2 – Temperature resistant to 105°C AWG 6 = 6 pc(s). 9340.890 – Wire ends with ultrasonic wire-end compression 13.3 mm2 ≙ 16 mm2 at both ends AWG = American Wire Gauges Technical details: Available on the Internet

Twin cords Version Packs of Model No. AWG 10 = for OM adaptors 6 pc(s). 9340.820 with tension spring clamp 2.5 – 16 mm2 5.26 mm2 ≙ 6 mm2 AWG 8 = Pre-assembled connection cables for individual con- 6 pc(s). 9340.830 nection of up to two switchgear units per adaptor. 8.37 mm2 ≙ 10 mm2 AWG = American Wire Gauges Cable length: L1 = 140 mm L2 = 250 mm Technical details: Material: Available on the Internet – PVC insulation – Temperature resistant to 105°C – Wire ends with ultrasonic wire-end compression at both ends

260 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for circuit-breaker component adaptors

To fit Width Packs Insert strips Approvals Model No. Model No. mm of for circuit-breaker component adaptors 9345.700/.710 To extend the construction width from 140 mm to 25 4 pc(s). 9342.720 190 mm. 9345.720/.730 Material: –ABS Note: – 4 pieces are needed to widen a component Colour: adaptor – RAL 7035

To fit With Packs Sliding blocks Model No. Model No. threaded insert of for circuit-breaker component adaptors For additional locking of circuit-breakers with more 9342.500/.510 9342.504/.514 M3/M4 6 pc(s). 9342.560 than two attachment points. 9342.540/.550 Colour: 9345.600/.610 M4/M5 6 pc(s). 9342.640 – RAL 7035 9345.604/.614 Note: – UL approval in conjunction with circuit-breaker component adaptor

Connection bracket Technical details: Available on the Internet for circuit-breaker component adaptors Pre-assembled, laminated flat copper for connecting standard, commercially available moulded case circuit-breakers (MCCB). Material: – Electrolytic copper F20 Insulation: –Vinyl compound – Temperature resistant to 105°C – Fire protection corresponding to UL 94-V0

To fit Dimensions1) For connecting moulded case circuit-breakers (MCCB), Packs Model No. Model No. mm make (model) of ABB (T1, T1 UL, T2, T2 UL), Eaton (NZM1, NZM1 UL, BZM B1), 9342.500/.510 6 x 9 x 0.8 OEZ (BC160N), 3 pc(s). 9342.5702) 9342.540/.550 Schneider Electric (NSC100, NSE75, NSE100) Siemens (3RV13 53, 3VT 1) 1) Number of lamina x lamina width x lamina thickness 2) Universal application for switchgear with a dimensional difference between the mounting level and the upper edge of the contact level of 20 ± 5 mm

To fit Width Packs Support rails 35 x 15 mm Approvals Model No. Model No. mm of for ◾ Circuit-breaker component adaptor 9342.400 9342.410 72 5 pc(s). 9320.120 ◾ Mini-PLS component adaptor 9629.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard

Rittal Catalogue 34/Power distribution 261 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for bus-mounting fuse bases

Contact hazard protection To fit Model No. Packs of Model No. covers 3418.010 (D 02-E 18) 10 pc(s). 3418.020 for bus-mounting fuse bases 3427.010 (D II-E 27) 10 pc(s). 3427.020 The cover ensures contact hazard protection from 3433.010 (D III-E 33) 10 pc(s). 3433.020 the front, top and below. All-round contact hazard protection (up to IP 2X) in conjunction with the side cover 3093.010/.020. Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0

Covers, side To fit Model No. Packs of Model No. for bus-mounting fuse bases 3418.010 (D 02-E 18) 10 pc(s). 3093.010 For clip-on mounting onto the contact hazard 3427.010 (D II-E 27) 10 pc(s). 3093.020 protection cover. 3433.010 (D III-E 33) Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0

Connection space extenders, To fit Model No. Packs of Model No. side 3418.010 (D 02-E 18) 10 pc(s). 3418.030 for bus-mounting fuse bases 3427.010 (D II-E 27) 10 pc(s). 3427.030 All-round contact hazard protection cover including 3433.010 (D III-E 33) 10 pc(s). 3433.030 cable duct for side extension of the connection space by 14 mm. Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0

262 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for NH fuse-switch disconn./NH slimline fuse-switch disconn.

Box terminals Technical details: Available on the Internet for NH disconnectors, sizes 1 to 3 with screw terminal For direct connection of round and sector-shaped conductors and laminated copper bars. Material: – Cast brass Surface finish: – Nickel-plated

Clamping area Connection To fit for laminated Sector-shaped Round conductor Packs of Model No. NH disconnectors copper bars, conductor mm2 W x H mm mm2 Size 1 20 x 14 35 – 150 50 – 150 3 pc(s). 9344.610 Size 2/3 32 x 20 95 – 300 120 – 300 3 pc(s). 9344.620

To fit Connection space covers Packs of Model No. NH disconnectors for NH disconnectors For extending the contact hazard protection cover, Size 00 2 pc(s). 9344.520 e.g. when using ring terminals with a long collar. Size 1 2 pc(s). 9344.530 Bayable as required at the top and bottom. Size 2 2 pc(s). 9344.540 Material: Size 3 2 pc(s). 9344.550 – Polyamide (PA 6) Colour: Technical details: – RAL 7035 Available on the Internet

Arc chambers Packs of Model No. for NH disconnectors, sizes 1 to 3 3 pc(s). 9344.680 To increase switching capacity (utilisation category). Technical details: Available on the Internet

Micro-switch for NH disconnectors/NH slimline fuse-switch To fit To fit disconnectors NH slimline Packs of Model No. NH fuse-switch To indicate the switch position of the NH unit disconnectors (cover). disconnectors Size 000/00 Sizes 1/2/3 5 pc(s). 3071.000 1) Sizes 1/2/3 – 2 pc(s). 9344.510 1 – Size 00 5 pc(s). 9346.400 1) Including plastic lug for attaching the microswitch to the disconnector chassis

Rittal Catalogue 34/Power distribution 263 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for NH slimline fuse-switch disconnectors

To fit Connection space cover Packs of Model No. Model No. for NH slimline fuse-switch disconnectors, 9346.000/.010/.015 size 00 1 pc(s). 9346.460 Extended version for the use of ring terminals with 9346.020/.030/.060 a long collar. Material: – Polycarbonate

Clamp-type terminal Packs of Model No. connection 1 set(s) 3592.010 for NH slimline fuse-switch disconnectors, size 00 with screw terminal For the connection of round conductors 1.5 to 95 mm2. Material: – Cast brass Surface finish: – Nickel-plated Technical details: Available on the Internet

Box terminals Packs of Model No. for NH slimline fuse-switch disconnectors, 3 pc(s). 9346.450 sizes 1 to 3 For converting NH slimline fuse-switch disconnectors to box terminal connection for round conductors up to 300 mm2. Material: – Cast brass Surface finish: – Nickel-plated

Busbar terminals For size 00 for NH slimline fuse-switch disconectors To fit Model No. Packs of Model No. For mounting NH slimline fuse-switch disconnec- 9346.040/.050 3 pc(s). 9346.470 tors on bar systems with 185 mm centre-to-centre spacing, no drilling required. For sizes 1 to 3 To fit Model No. Packs of Model No. 9346.110/.210/.310 3 pc(s). 9346.440 9346.115/.215/.315

264 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com RiLine accessories for NH slimline fuse-switch disconnectors

Current converter ◾ Compact design without altering the installation depth via mechanical integration into the fuse- for NH slimline fuse-switch disconnectors switch disconnector (sizes 1 to 3); this allows space-saving assembly ◾ User-friendly cable connection via terminal block

For size 00 1 9346.050 For NH slimline fuse-switch disconnectors (185 mm bar centre distance) Phases 1 1

Primary current I1N 150 A 150 A

Secondary current I2N 1 A 5 A Accuracy class 1 1 Rated frequency 50 – 60 Hz 50 – 60 Hz

Thermal rated continuous current 1.2 x I1N 1.2 x I1N

Thermal rated short-time withstand current Ith 60 x I1N 60 x I1N 2.5 x I , 2.5 x I , 1 Rated surge current I th th dyn max. 120 kA max. 120 kA Overcurrent limiting factor (FS) FS 5 FS 5 Insulation voltage 3 kV 3 kV Insulating material category E E Fibreglass-reinforced Fibreglass-reinforced Material polycarbonate polycarbonate Connection Screw terminal M5 Screw terminal M5 Rated output 2.5 VA 2.5 VA Packs of 3 pc(s). 3 pc(s). 2 Model No. 9346.560 9346.570

For sizes 1 to 3 9346.110/.115/.210/.215/.310/.315 For NH slimline fuse-switch disconnectors (185 mm bar centre distance)

Primary current I1N 250 A 250 A 400 A 400 A 600 A 600 A

Secondary current I2N 1 A 5 A 1 A 5 A 1 A 5 A Accuracy class 1 1 1 1 1 1 Rated frequency 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz

Thermal rated continuous current 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 2 60 x I , 60 x I , 60 x I , 60 x I , 60 x I , 60 x I , Thermal rated short-time withstand current I 1N 1N 1N 1N 1N 1N th max. 50 kA max. 50 kA max. 50 kA max. 50 kA max. 50 kA max. 50 kA

2.5 x Ith, 2.5 x Ith, 2.5 x Ith, 2.5 x Ith, 2.5 x Ith, 2.5 x Ith, Rated surge current Idyn Max. Max. Max. Max. Max. Max. 120 kA 120 kA 120 kA 120 kA 120 kA 120 kA Overcurrent limiting factor (FS) FS 5 FS 5 FS 5 FS 5 FS 5 FS 5 Insulation voltage 3 kV 3 kV 3 kV 3 kV 3 kV 3 kV Insulating material category EEEEEE Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Material PA 6 PA 6 PA 6 PA 6 PA 6 PA 6 Connection (box terminal) 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 Rated output 5 VA 5 VA 5 VA 5 VA 5 VA 5 VA Packs of 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). Model No. 9346.600 9346.630 9346.610 9346.640 9346.620 9346.650

Cable ties Packs of Model No. for NH slimline fuse-switch disconnectors, 1 pc(s). 9346.480 sizes 1 to 3 For rear routing of the current converter cables. Material: – Polyamide (PA 6)

Rittal Catalogue 34/Power distribution 265 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com 266 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power Modular system ◾ For low-voltage switchgear with design verification to IEC 61 439-1/-2 and DIN EN 61 439-1/-2 ◾ For control systems and power distribu- tors ◾ Structured system solution for switchgear with Form separation 1-4b ◾ Simple, assembly-friendly system layout

Busbar systems up to 5500 A ◾ RiLine – The compact busbar system up to 1600 A, see page 211 ◾ Maxi-PLS – The assembly-friendly system, see page 268 ◾ Flat-PLS – The flat bar system for standard requirements, see page 271 ◾ Tested PE conductor system, see page 648

◾ High levels of short-circuit withstand (ICW) up to 100 kA for 1 sec./220 kA peak

Modular enclosure system ◾ Based on enclosure platform TS 8, see page 76 ◾ Flexible, modular front design, see page 552 ◾ Roof plates to suit most requirements, see page 583 ◾ Modular compartment configuration for internal compartmentalisation up to Form 4b, see page 283 ◾ Inner contact hazard protection covers for air circuit-breakers and NH slimline fuse-switch disconnectors, see page 281 ◾ Accessories for Ri4Power, see page 289

Simple planning ◾ Rittal Power Engineering with update function Model No. 3020.500, see page 295 ◾ Configuration of low-voltage switchgear with design certificate ◾ Simple, fast assembly with automatically generated assembly plan ◾ Generation of parts lists with graphical output

Rittal Catalogue 34/Power distribution 267 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Maxi-PLS

System components

Note: Technical details: – Busbars for Available on the Internet PE/PEN combinations, see page 648/649

Packs Maxi-PLS 1600/2000 Maxi-PLS 3200 Supports and attachment in the TS enclosure of Model No. Model No. 3-pole 4-pole 3-pole 4-pole

A Busbar support 1 pc(s). 9649.000 9659.000 Material: Polyamide (PA 6.6)

D B Busbar support, suitable for top mounting 1 pc(s). 9649.160 9659.160 Material: Polyamide (PA 6.6) A

B C End supports 2 pc(s). 9649.010 9659.010 Material: Polyamide (PA 6.6) C D System attachment for installation in the busbar support. Material: Stainless steel For Bar centre For Packs enclosure depth distance Model No. Model No. application of D1 mm mm D2 100 2 pc(s). 9640.080 – D1 In the roof/base 600 section, directly 150 2 pc(s). – 9650.100 above/below the coupling switch 800 150 2 pc(s). – 9650.080

D2 Rear section – 150 2 pc(s). – 9650.098 top/bottom D3 3-pole 4-pole 3-pole 4-pole D3 Rear section, centre – 185 2 pc(s). (185 mm) 9640.150 – 9650.150 –

Maxi-PLS Maxi-PLS Maxi-PLS A Maxi-PLS busbars, E-Cu 1600 2000 3200 For enclosure width For Length Packs Model No. Model No. A mm application1) mm of 600 a 491 1 pc(s). 9640.206 9640.201 9650.201 600 b 525 1 pc(s). 9640.216 9640.211 9650.211 600 c 599 1 pc(s). 9640.226 9640.221 9650.221 800 a 691 1 pc(s). 9640.236 9640.231 9650.231 800 b 725 1 pc(s). 9640.246 9640.241 9650.241 B 800 c 799 1 pc(s). 9640.256 9640.251 9650.251 1000 a 891 1 pc(s). 9640.266 9640.261 9650.261 b 1000 b 925 1 pc(s). 9640.276 9640.271 9650.271 c 1000 c 999 1 pc(s). 9640.286 9640.281 9650.281 b 1200 a 1091 1 pc(s). 9640.296 9640.291 9650.291 1200 b 1125 1 pc(s). 9640.306 9640.301 9650.301 1200 c 1199 1 pc(s). 9640.316 9640.311 9650.311 – – 2400 3 pc(s). 9640.365 9640.360 9650.360 – – 2400 4 pc(s). – 9649.360 9659.360 a B Longitudinal connector E-Cu for simple baying connection of Maxi-PLS busbars. 1 pc(s). 9640.191 9640.191 9650.191 Incl. sliding blocks, bolts, washers and nuts. 1) a = Cable connection system with end support b = Left-hand or right-hand end enclosure in a switchgear installation c = Bayed enclosure with sections bayed on the left and right

Contact hazard protection Packs of Model No. Model No.

B A Cover section for clip-on mounting on the Maxi-PLS busbars, length 1000 mm. 5 pc(s). 9640.050 9650.050 Material: Hard PVC

B End cover for clip-on mounting on the end surface of A Maxi-PLS busbars. 2 pc(s). 9649.060 9659.060 Material: Polyamide (PA 6.6)

268 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Maxi-PLS

System components

Packs Maxi-PLS 1600/2000 Maxi-PLS 3200 Connection system of Model No. Model No. Contact maker E-Cu for contacting the connection brackets to the Maxi-PLS busbars. Incl. sliding blocks.

60 1 pc(s). 9640.171 9650.171 Width mm 100 1 pc(s). 9640.181 9650.181

Connection clamp for the connection of round conductors (Cu/Al) 95 to 300 mm² (single-wire and multi-wire). Incl. assembly parts.

1 pc(s). 9640.325 9650.325

Connection plates for the connection of laminated flat copper bars. Assembly parts.

2 x 10 x 32 x 1 3 pc(s). 9640.330 9650.330

Maximum clamping area 2 x 10 x 63 x 1 3 pc(s). 9640.340 9650.340 mm

2 x 10 x 100 x 1 3 pc(s). 9640.350 –

Terminal stud for connecting cables with ring terminals, Length 30 mm Length 32 mm including sliding blocks.

M12 3 pc(s). 9640.370 9650.370 Thread M16 3 pc(s). 9640.380 9650.380

Sliding blocks for sliding into the Maxi-PLS busbar section at the sides. M8 Length 20 mm 15 pc(s). 9640.970 – Thread M10 Length 25 mm 15 pc(s). 9640.980 9650.980 M12 Length 35 mm 15 pc(s). – 9650.990 Sliding nuts for retrospective insertion into the Maxi-PLS busbar section. M6 15 pc(s). 9640.900 9650.900 15 pc(s). 9640.910 – M8 Thread 3 pc(s). – 9650.905 M10 15 pc(s). 9640.920 9650.910 M12 15 pc(s). – 9650.920 Threaded bolts for individual connection options. Including nuts, plain washers, spring lock washers (M6 and M8 only) or washers (M10 and M12 only). Note: Sliding blocks or sliding nuts are additionally required for attachment. M6 Length 35 mm 6 pc(s). 9640.930 9640.930 M8 Length 35 mm 6 pc(s). 9640.940 9640.940 M10 Length 35 mm 8 pc(s). 9676.971 9676.971 M10 Length 45 mm 8 pc(s). 9676.972 9676.972 M10 Length 55 mm 8 pc(s). 9676.973 9676.973 M10 Length 70 mm 8 pc(s). 9676.976 9676.976 Thread M10 Length 80 mm 8 pc(s). 9676.977 9676.977 M12 Length 40 mm 8 pc(s). – 9676.981 M12 Length 50 mm 8 pc(s). – 9676.982 M12 Length 60 mm 8 pc(s). – 9676.983 M12 Length 70 mm 8 pc(s). – 9676.986 M12 Length 80 mm 8 pc(s). – 9676.987

Rittal Catalogue 34/Power distribution 269 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Maxi-PLS

System components

Connection system Packs of Model No. Compact infeed for Maxi-PLS busbar 1600/2000 For individual use as a 3-pole cable connection bar system. Direct mounting on the mounting plate or on the punched section without mounting flange. 1 set(s) 9660.980 Supply includes: 6 end supports, 2 support plates for end supports, 1 PS punched rail, 23 x 23 mm (length 495 mm), mounting accessories

Maxi-PLS 1600/2000 Maxi-PLS 3200 Shielding Model No. Model No. A Divider panel for TS enclosures. For side shielding from neighbouring panels. Assembly parts. Maxi-PLS busbars in the roof section For enclosure depth For enclosure height B Packs of mm mm 600 2000 1 pc(s). 9660.620 9660.620 Maxi-PLS busbars in the rear section For enclosure depth For enclosure height Packs of mm mm 600 2000 1 pc(s). 9660.610 9660.610 A B Busbar gland The busbar gland may also be used as a cover for the longitudinal connectors. Including assembly parts. Use with longitudinal connector 1600/2000 3200 Packs required Packs of no yes 3-pole 4-pole 3-pole 4-pole ◾ – 6 1 set(s) 9640.600 – 9650.600 – B ◾ – 8 1 set(s) – 9640.600 – 9650.600 9640.610 9650.610 3 1 set(s) – + – + – ◾ 3 1 set(s) 9640.600 9650.600 9640.610 9650.610 4 1 set(s) – – + – + ◾ 4 1 set(s) 9640.600 9650.600

Power Engineering

see page 295 Accessories

270 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Flat-PLS System components

Busbar system Flat-PLS 60/ Technical details: Flat-PLS 100, for flat copper bars Available on the Internet For the configuration of busbar systems from flat copper bars. For mounting on a system attachment or directly on the mounting plate. Max. admissible tolerance of bar width (60/100 mm) ± 0.3 mm, bar thickness (10 mm) ± 0.15 mm

Flat-PLS 60 Flat-PLS 100 Supports and attachment in the TS enclosure Model No. Model No. A Busbar support Material: Polyamide (PA 6.6) For Packs System busbars up to D of mm1) Flat-PLS 60 4 x 60 x 10 1 pc(s). 9676.002 – Flat-PLS 100 4 x 100 x 10 1 pc(s). – 9676.004 B Busbar support for stabiliser bar Material: Polyamide (PA 6.6) A For Packs System busbars up to of mm1) Flat-PLS 60 4 x 60 x 10 1 pc(s). 9676.020 – Flat-PLS 100 4 x 100 x 10 1 pc(s). – 9676.021 D D System attachment for installation in the busbar support. Material: Stainless steel For Bar centre distance For Packs enclosure depth mm 3-pole 4-pole 3-pole 4-pole application of mm 120 165 185 ◾ – – 2 pc(s). 9674.162 9674.162 – – D1 In the roof/base 600 section/directly – ◾ – 2 pc(s). – – 9674.164 – B above/below ◾ – – 2 pc(s). 9674.182 9674.182 – – coupling switch 800 C – ◾ – 2 pc(s). – – 9674.184 9674.184 ◾ – – 2 pc(s). 9674.172 9674.172 – – 600 – ◾ – 2 pc(s). – – 9674.174 – D2 Vertical coupling set ◾ – – 2 pc(s). 9674.192 9674.192 – – D1 800 – ◾ – 2 pc(s). – – 9674.194 9674.194 D3 D3 Rear section ◾ – – 2 pc(s). 9674.122 9674.122 – – top/bottom – ◾ – 2 pc(s). – – 9674.124 9674.124 – D4 Rear section, centre – – ◾ 2 pc(s). 9674.152 – – – (185 mm) – – ◾ 2 pc(s). – – 9674.154 – D5 Single-pole assembly, for mounting on the TS frame 2 pc(s). 9674.102 9674.102 9674.104 9674.104 C Busbar stabiliser bars D2 Material: Stainless steel For Bar centre distance Packs System layout 3-pole 4-pole 3-pole 4-pole D4 busbar support mm of D5 120 3/4-pole 2 pc(s). 9676.022 9676.023 – – 9676.020 185 3-pole 2 pc(s). 9676.026 – – – 165 3/4-pole 2 pc(s). – – 9676.024 9676.025 9676.021 185 3-pole 2 pc(s). – – 9676.027 – 1) At a bar width of < 60 mm for Flat-PLS 60 or < 100 mm for Flat-PLS 100, the empty gaps in the support should be filled with spacers. When using only 1, 2 or 3 bars, the vacant bar slots should be closed using the filler pieces.

Rittal Catalogue 34/Power distribution 271 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Flat-PLS

System components

Flat-PLS 60 Flat-PLS 100 Busbars and accessories for supports Model No. Model No. A Busbars E-Cu to DIN EN 13 601. Length: 2400 mm/bar Dimensions mm Packs of E 40 x 10 3 pc(s). 3587.000 – 50 x 10 2 pc(s). 3588.005 – 60 x 10 2 pc(s). 3589.005 – 80 x 10 1 pc(s). – 3590.005 E 100 x 10 1 pc(s). – 3590.015 A D B Spacer – At a bar width of < 60/100 mm the spacer should be used. Material: Polyamide (PA 6.6) E-Cu Required number of spacers Packs of Dimensions mm per chamber B 40 x 10 2 pc(s). 50 x 10 1 pc(s). 16 pc(s). 9676.007 9676.007 80 x 10 2 pc(s). C Filler piece – When using only 1, 2 or 3 bars, the vacant bar slots should be closed using the filler pieces. C Material: Polyamide (PA 6.6) Packs of Flat-PLS 60 2 per free bar slot 16 pc(s). 9676.008 9676.008 Flat-PLS 100 3 per free bar slot D Longitudinal connector E-Cu for connecting Flat-PLS busbar systems, no drilling required. No. of strands For busbar width Screw Packs of per conductor mm 2 40 – 100 1) 1 pc(s). 9676.621 9676.621 3 or 4 40 – 100 1) 1 pc(s). 9676.641 9676.641 1) Must be ordered additionally according to the busbar width B (length = B + 40 mm, screw connections, see page 273). E Busbar claws for Flat-PLS For busbar width up to Screw Packs of mm 2 x B x 10 1) 1 pc(s). 9676.017 9676.017 4 x B x 10 1) 1 pc(s). 9676.019 9676.019 1) Must be ordered additionally according to the busbar width B (length = B + 20 mm, screw connections, see page 273)

Flat-PLS 60 Flat-PLS 100 Contact hazard protection Model No. Model No. Cover sections for Flat-PLS C Material: Hard PVC No. of For busbar Length For system bars per Packs of width mm mm conductor B A Edge cover section for bar systems with no space 1 – 1000 10 pc(s). 9676.041 9676.041 A between the strands A Edge cover section for 2 – 1000 10 pc(s). 9676.052 9676.052 bar systems with 10 mm D space between the strands 4 – 1000 10 pc(s). 9676.054 9676.054

B Side cover section for bar – 60 1000 10 pc(s). 9676.056 9676.056 systems, to match the – 80 1000 10 pc(s). 9676.058 9676.058 B A edge cover sections – 100 1000 10 pc(s). 9676.059 9676.059 C End covers for busbar supports Flat-PLS Material: Polyamide (PA 6.6) Packs of For Flat-PLS 60 and Flat-PLS 100 A B 2 pc(s). 9676.006 9676.006 D Covers for busbar claws Material: Polyamide (PA 6.6) For busbar claw No. of bars per conductor Packs of Model No. 9676.017 2 8 pc(s). 9676.046 9676.046 9676.832 4 9676.019 8 pc(s). 9676.048 9676.048

272 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems Flat-PLS

System components

Flat-PLS 60 Flat-PLS 100 Connection system Model No. Model No. A Direct connection terminal for Flat-PLS A For the direct connection of round conductors. For Screw Packs of round conductors 95 – 300 mm2 re/rm 1) 1 pc(s). 9676.730 9676.730 1) Must be ordered additionally according to the busbar width B (length = B + 60 mm, screw connections, see page 273) B B Connection plates for laminated copper bars, including assembly parts (excluding screws) For busbar width Screw Packs of mm 2 x 10 x 32 x 1 1) 1 pc(s). 9676.747 9676.747 2 x 10 x 63 x 1 1) 1 pc(s). 9676.748 9676.748 C 2 x 10 x 100 x 1 1) 1 pc(s). 9676.749 9676.749 1) Must be ordered additionally according to the busbar width B (length = B + 50 mm, screw connections, see page 273) C Connection plates with bolts M10, including assembly parts (excluding screws) Terminal studs Screw Packs of M10 1) 1 pc(s). 9676.710 9676.710 D 1) Must be ordered additionally according to the busbar width B (length = B + 40 mm, screw connections, see page 273) D Connection plates with bolts M12, including assembly parts (excluding screws) Bolt length Terminal studs Screw Packs of mm M12 1) 30 1 pc(s). 9676.700 9676.700 1) Must be ordered additionally according to the busbar width B (length = B + 20 mm, screw connections, see page 273) A Claw with threaded insert M10 B Threaded insert Packs of A M10 8 pc(s). 9676.832 9676.832 B Screw connections Screw design Packs of M10 x 60 8 pc(s). 9676.806 9676.806 M10 x 70 8 pc(s). 9676.807 9676.807 M10 x 80 8 pc(s). 9676.808 9676.808 M10 x 90 8 pc(s). 9676.809 9676.809 M10 x 100 8 pc(s). 9676.810 9676.810 M10 x 110 8 pc(s). 9676.811 9676.811 M10 x 120 8 pc(s). 9676.812 9676.812 M10 x 130 8 pc(s). 9676.813 9676.813 M10 x 140 8 pc(s). 9676.814 9676.814 M10 x 150 8 pc(s). 9676.815 9676.815 M10 x 160 8 pc(s). 9676.816 9676.816 M10 x 170 8 pc(s). 9676.817 9676.817 M10 x 190 8 pc(s). 9676.819 9676.819 A Claw with threaded insert M8 for NH slimline fuse-switch disconnectors, size 00 A For mounting NH slimline fuse-switch disconnectors size 00 on Flat-PLS bar systems with 185 mm centre-to-centre spacing. Note: M8 screws (zinc-plated and passivated, strength 8.8, length: busbar width + 20 mm) are additionally required. Screws are not included with the supply. Threaded insert Packs of M8 3 pc(s). 9676.831 9676.831 A Contact makers E-Cu for contacting the connection brackets to the Flat-PLS busbars. For No. busbar Screw of strands Packs of width (B) mm per conductor 60 1) 2 1 pc(s). 9676.526 9676.526 A 60 1) 3 or 4 1 pc(s). 9676.546 9676.546

80 1) 2 1 pc(s). 9676.528 9676.528

80 1) 3 or 4 1 pc(s). 9676.548 9676.548

100 1) 2 1 pc(s). 9676.520 9676.520

B 100 1) 3 or 4 1 pc(s). 9676.540 9676.540 1) Must be ordered additionally according to the busbar width B (screw connections, see page 273). Screw length = (no. of strands x 10 mm) + bar width of main busbar + 40 mm. No. of screws per bracket: – with 2 strands per conductor of the main busbar system: 2 pc(s). – with 3/4 strands per conductor of the main busbar system: 4 pc(s).

Rittal Catalogue 34/Power distribution 273 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection components for Maxi-PLS/Flat-PLS For air circuit-breakers and busbar connections

For connecting air circuit-breakers (ACB) to Material: Maxi-PLS/Flat-PLS busbar systems in TS –E-Cu Also required: enclosures. Alternatively, for connecting main Note: – Screw connections M10/M12, and multi-terminal busbar systems and for – Please quote the complete design code on see page 280 connecting horizontal and vertical main bus- all enquiries and orders – Terminal studs Maxi-PLS, see page 269 bar systems. – For configuration with the Rittal Power – Screw connections Flat-PLS, see page 273 Please include the design code of the specifi- Engineering software, 2 check numbers are – Spacer rolls, page 289 cation given below in the order text for your additionally output with a hyphen connector kit. We recommend the Rittal Power Engineer- ing 3020.500 software from Version 6.1 for easier configuration of the connector kits and connection brackets, see page 295.

Design code Multi- Multi- terminal Compart- terminal busbar Busbar Busbar ment Busbar busbars system, Code Enclosure system, Air circuit-breaker system, height, configu- Type and in front of length Model No. bottom top air circuit- ration number or behind breaker of poles mounting plate abcde fgh i j k lm n o p q Connector kit for 9676.910 14 ACB, top Connector kit for 9676.912 14 ACB, bottom Connection bracket 9676.200 14 above ACB Connection bracket 9676.210 14 below ACB

9675.100 T-connector kit 9

Bracket connector 9675.840 8 kit Fuse-switch discon- 9674.480 nector section 8 connection bracket Leave grey sections blank

Enclosure Selection Width mm

a 2 2004 4006 6008 8000 10001 1200

Height mm

b b 0 20002 2200

Depth mm

a c c 6 6008 800

274 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection components for Maxi-PLS/Flat-PLS For air circuit-breakers and busbar connections Busbar system, bottom Busbar type Selection 3-poleA 1600 4-pole B 3-pole C Maxi-PLS 2000 4-pole D 3-pole E 3200 4-pole F 3-pole I 60 d 4-pole J Flat-PLS 3-pole M 100 2 bars 3 bars 4 bars 4-pole N 3-pole Q Cu 30 x 5/10 mm RiLine 4-pole R (for T-connector kit only) 3-pole S Cu PLS PLS 1600 4-pole T No system available X

Busbar system configuration Selection

in the base section 6

in the lower rear section 7

e as cable connection system 8

directly underneath the air circuit-breaker 9

No system available 0

Air circuit-breaker Selection Selection ABB A 3-pole 3 ABB (Emax2) B 4-pole 4 Static Eaton/Moeller E instal- 3-pole with non- GE G lation 5 switched f Brand Mitsubishi J Number N i of poles/ Schneider Electric M Version 3-pole 6 Siemens/Moeller S 4-pole 8 Terasaki T Rack- 3-pole mounted with non- Various V 7 switched 1/none 1 N 2 2 g Size Behind the door HT H n 3 3 j Position In front of the door V 4 4 (in door cut-out) VT f/g/h/i/j 630 A A 0 mm 0 800 A B 150 mm 1 1000 A C 200 mm 2 k Compart- 1250 A D ment height 250 mm 3 directly Rated 1600 A E k 300 mm 4 h beneath the current 2000 A F air circuit- 400 mm 5 breaker 2500 A G 600 mm1) 6 3200 A H 800 mm 7 4000 A2) I 1000 mm 8 5000 A2) J Compart- 600 mm1) 6 ment height 2) n 800 mm 7 Not available for all brands of air circuit-breaker 1000 mm 8 1) Standard height in version 1 With version 1, a 6 should be selected

Rittal Catalogue 34/Power distribution 275 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection components for Maxi-PLS/Flat-PLS For air circuit-breakers and busbar connections Busbar system, top Busbar type Selection 3-poleA 1600 4-pole B 3-pole C Maxi-PLS 2000 4-pole D 3-pole E 3200 4-pole F 3-pole I 60 l 4-pole J Flat-PLS 3-pole M 100 2 bars 3 bars 4 bars 4-pole N 3-pole Q Cu 30 x 5/10 mm RiLine 4-pole R (for T-connector kit only) 3-pole S Cu PLS PLS 1600 4-pole T No system available X

Busbar system configuration Selection

in the roof section 1

in the top rear section 2

as cable connection system 600 mm 3 as cable connection system 800 mm 8 m m as cable connection system 1000 mm 9

directly above the air circuit-breaker 4

in rear centre section, version 1 5

No system available 0 RiLine Cu 30 x 5/10 mm 3-poleQ RiLine Cu 30 x 5/10 mm 4-pole R Multi-terminal RiLine PLS 1600 3-pole S busbar system o Multi-terminal busbar system RiLine PLS 1600 4-pole T Type and number Multi-terminal busbar fuse-switch of poles 3-pole E disconnector section Multi-terminal busbar fuse-switch 4-pole F disconnector section

Multi-terminal In front of mounting plate (indoor) 1 busbar system p in front of or behind mounting plate Behind mounting plate 2 in front of mounting behind mounting

Bar configuration, busbar dimensions up to Selection Version/bar configuration of the busbar systems Maxi-PLS 1600/2000 H – VA to be connected Maxi-PLS 1600/2000 HR – V B Maxi-PLS 3200 H – V C Maxi-PLS 3200 HR – V D up to 2 x 40 x 10 H – V E up to 2 x 60 x 10 H – V F up to 4 x 60 x 10 H – V G q up to 4 x 40 x 10 H – V H H – V HR – V up to 2 x 100 x 10 H – V I up to 4 x 80 x 10 H – V J H = Horizontal up to 4 x 100 x 10 H – V K V = Vertical HR = Horizontal in the rear section, up to 2 x 60 x 10 HR – V L behind one another up to 4 x 60 x 10 HR – V M up to 2 x 100 x 10 HR – V N up to 4 x 100 x 10 HR – V O

276 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connection components for Maxi-PLS/Flat-PLS For air circuit-breakers and busbar connections Sample design code Multi-ter- Multi- Compart- minal bus- terminal Busbar Busbar ment bar system, Busbar busbars Code Enclosure system, Air circuit-breaker system, height, in front of configu- Type and length Model No. bottom top air circuit- or behind ration number of breaker mounting poles plate abcde fgh i j k lm n o p q Connector kit for 9676.910 14 ACB, top 8 0 6 B 8 A 1 E 4 V 6 D 1 6 Connector kit for 9676.912 14 ACB, bottom 8 0 6 B 8 A 1 E 4 V 6 D 1 6 Connection bracket 9676.200 14 above ACB 8 0 6 B 8 A 1 E 4 V 6 D 1 6 Connection bracket 9676.210 14 below ACB 8 0 6 B 8 A 1 E 4 V 6 D 1 6

9675.100 T-connector kit 6 0 6 X 0 T 2 T 1 9

Bracket connector 9675.840 8 kit 2 0 6 B 9 X 0 A Fuse-switch discon- 9674.480 nector section 1 0 6 X 0 J 1 F 8 connection bracket Leave grey sections blank

Example of 9676.910, 9676.912, 9676.200, 9676.210 Example of 9675.100 Design code: 806B8A1E4V6D16 Design code: 606X0T2T1

1 1 Maxi-PLS 2000 1 4-pole, in roof area

1 9675.100 2 2 9676.200 2

3 3 9676.910 3 2000 2 RiLine, PLS 1600, 600 4 ACB: ABB E1, 1600 A, 2000 4-pole, in rear section, 4 4-pole, VT top 5

5 9676.912 600 6

7 6 9676.210 3 RiLine, PLS 1600, 4-pole, in front of mounting plate 800 600 600 7 Maxi-PLS 1600, 4-pole, 600 as cable connection system

Example of 9675.840 Example of 9674.480 Design code: 206B9X0A Design code: 106X0J1F

1 1 Busbar system 1 vertical, Maxi-PLS 1600, 1 9674.480 4-pole

2 2000 3 2000 2 Flat-PLS 60, 4-pole, 2 9675.840 in the roof section

200 3 Busbar system 3 Multi-terminal busbar horizontal, 1200 system, 4-pole 600 Maxi-PLS 1600, 4-pole 600 600

Rittal Catalogue 34/Power distribution 277 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems (100/185/150 mm)

NH slimline fuse-switch disconnector Page 246/248 NH fuse-switch disconnector Page 238 Accessories Page 289

Material: Colour: Technical details: Busbar supports, inserts – RAL 7035 Available on the Internet – Fibreglass-reinforced, thermo- Note: plastic polyester (PBT) – The base component of the – Fire protection corresponding busbar support 3052.000 may to UL 94-V0 also be used as a single-pole support

Busbar systems up to 1250 A (100 mm), 1600 A (185 mm), 2500 A (150 mm), 3000 A (150 mm) Packs Model No. Busbar support, 3-pole Page of A 1250 A B 1600 A C 2500 A C 3000 A 30 x 420 x 30 x 420 x Width x height x depth mm 22 x 320 x 70 24 x 515 x 51 160 170 Max. bar accommodation mm 60 x 10 80 x 10 2 x 80 x 10 2 x 100 x 10 Inserts for a) Cross-section reduction to mm 30 x 10 to 50/60 x 10 – – 50 x 10 b) Reducing the bar width in 10 mm increments – – ◾ ◾ Bar centre distance mm 100 185 150 150 Packs of 4 pc(s). 2 pc(s). 2 pc(s). 2 pc(s). 3073.000 3052.000 3055.000 3057.000 C Accessories 30 x 10 mm 24 pc(s). 3074.000 – – – 40 x 10 mm 24 pc(s). 3075.000 – – – Inserts to adapt the bar dimensions B 50 x 10 mm 24 pc(s). 3076.000 3074.000 – – A 60 x 10 mm 24 pc(s). – 3075.000 – – Spacing element for reducing the bar width in 10 mm 12 pc(s). – – 3056.000 3056.000 increments D System attachment for rear section Material: Sheet steel 2 pc(s). – 9674.100 – – Surface finish: Zinc-plated Supply includes: Assembly parts Busbars E-Cu1) to DIN EN 13 601, length 2400 mm Dimensions mm 30 x 10 3 pc(s). 3586.005 – – – 40 x 10 3 pc(s). 3587.000 – – – 50 x 10 2 pc(s). 3588.005 3588.005 – – 252 60 x 10 2 pc(s). 3589.005 3589.005 3589.005 3589.005 80 x 10 1 pc(s). – 3590.005 3590.005 3590.005 100 x 10 1 pc(s). – – – 3590.015 Accessories 30 x 10 mm 4 pc(s). 9661.350 – – – Baying bracket E-Cu for 40 x 10 mm 4 pc(s). 9661.050 – – – 649 80 x 10 mm 4 pc(s). – 9661.150 – – Longitudinal connector for 2 x bar width x 10 mm 1 pc(s). – – 9676.6212) 9676.6212) 272 1) For other busbar lengths, see page 648 2) The required screw must be ordered separately according to the bar width, see page 273

278 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Busbar systems (100/185/150 mm)

Packs Model No. Contact hazard protection Page of 1250 A 1600 A 2500 A 3000 A End covers for busbar supports 10 pc(s). 3083.000 – – –

30 x 10 mm 10 pc(s). 3092.000 – – – Busbar cover section, 253 length 1 m for E-Cu 40 x 10 to 60 x 10 mm 10 pc(s). 3085.000 3085.000 – –

A Edge cover section for bar for 1 busbar per conductor 10 pc(s). 9676.041 9676.041 – – B A systems with 10 mm space between the strands, length 1 m for 2 busbars per conductor 10 pc(s). – – 9676.052 9676.052 For busbar width 272 Side cover section for bar 60 mm 10 pc(s). 9676.056 9676.056 9676.056 9676.056 B B systems, to match the edge A cover sections, length 1 m 80 mm 10 pc(s). 9676.058 9676.058 9676.058 9676.058 100 mm 10 pc(s). 9676.059 9676.059 9676.059 9676.059 Connection system, see page 257 (system accessories) A Plate clamps for connecting laminated copper bars; no drilling required For busbars Clamping area for A mm laminated copper bars mm 30 x 10 34 x 10 3 pc(s). 3554.000 – – – 40 x 10 34 x 10 3 pc(s). 3559.000 – – – 50 x 10 34 x 10 3 pc(s). 3560.000 3560.000 – – 257 50 x 10 54 x 10 3 pc(s). 3562.000 3562.000 – – 60 x 10 34 x 10 3 pc(s). 3561.000 3561.000 – – C 60 x 10 54 x 10 3 pc(s). 3563.000 3563.000 – – B 80 x 10 65 x 10 3 pc(s). – 3460.500 – – Conductor connection clamps for 10 mm bar thickness Connection of round conductors1) Clamping area for mm² laminated copper bars mm B 1 – 4 – 15 pc(s). 3555.000 3555.000 3555.000 3555.000 1 – 4 – 15 pc(s). 3455.500 3455.500 3455.500 3455.500 257 D 2.5 – 16 8 x 8 15 pc(s). 3456.500 3456.500 – – C 16 – 50 10.5 x 11 15 pc(s). 3457.500 3457.500 – – 35 – 70 16.5 x 15 15 pc(s). 3458.500 3458.500 – – 70 – 185 22.5 x 20 15 pc(s). 3459.500 3459.500 – – D System covers for conductor connection clamps and plate clamps Width x depth mm

– 325 50 x 80 4 pc(s). 3086.000 – – –

230 100 x 80 4 pc(s). 3087.000 – – – 257 100 x 110 4 pc(s). 3090.000 – – – 200 x 80 4 pc(s). 3088.000 – – – 200 x 110 4 pc(s). 3091.000 – – – E Inserted screw nuts M12, self-holding nuts with knurled ring for mounting NH slimline fuse-switch disconnectors E For drilled holes in busbars Ø 14.5 mm 30 pc(s). 3591.060 3591.060 – – 253 F Connection plates for laminated copper bars For laminated copper bars up to Connection of laminated copper bars 2 x 10 x 100 x 1.0 mm 2) 2) 2 x 10 x 32 x 1 mm 1 pc(s). – – 9676.747 9676.747 273 F on a busbar system with two bars 2) 2) per conductor 2 x 10 x 63 x 1 mm 1 pc(s). – – 9676.748 9676.748 2 x 10 x 100 x 1 mm 1 pc(s). – – 9676.7492) 9676.7492) G Direct connection terminals For the connection of round conductors 95 – 300 mm2 G 1 pc(s). – – 9676.7302) 9676.7302) 273 (single or multi-wire) 1) Wire end ferrules should be used with fine and extra-fine wire conductors 2) The required screw connection must be ordered additionally according to the busbar width, see page 273

Rittal Catalogue 34/Power distribution 279 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Connector kits for Maxi-PLS/Flat-PLS System accessories

Screw connections Material: – Steel screws, zinc-plated, passivated for connection brackets For connecting connection brackets and a connec- Supply includes: tor kit. – 8 nuts and 16 washers May be used for 3- and 4-pole connector kits. Note: – For a bar width of 120 mm, 2 packs are required per connector kit Technical details: Available on the Internet

No. For Screw of bars Packs of Model No. systems type per phase M10 x 40 1 8 pc(s). 9676.966 Maxi-PLS1) M10 x 60 2 8 pc(s). 9676.967 1600/2000/3200 M10 x 80 3 8 pc(s). 9676.968 Maxi-PLS2) M12 x 40 1 8 pc(s). 9676.961 1600/2000/3200 and M12 x 60 2 8 pc(s). 9676.962 Flat-PLS 60/100 M12 x 80 3 8 pc(s). 9676.963 1) For connection bracket width 60/80 mm 2) For connection bracket width 100/120 mm

Stacking insulator Packs of Model No. To support the connector kits top/bottom for circuit- 6 pc(s). 9660.200 breakers. Easily retro-fitted. Supply includes: Technical details: – Assembly parts Available on the Internet

For enclosure width Support rails Packs of Model No. mm for stacking insulator For attaching to the outer mounting level of the TS 600 2 pc(s). 9676.196 enclosure and for the configuration of stacking insu- 800 2 pc(s). 9676.198 lators. C rail may also be used as cable manage- ment rail. Material: – Sheet steel, zinc-plated Supply includes: – Assembly parts

For enclosure width Stabiliser Packs of Model No. mm for connector kit To increase short-circuit withstand ratings of the 600 2 pc(s). 9676.186 connector kits from 75 kA to 100 kA, 1 sec. 800 2 pc(s). 9676.188 2 stabilisers are required per connector kit. May be used for 3- and 4-pole connector kits. One stabiliser is used in place of a normal stacking insulator arrangement. Also required: Material: – Support rail for stacking insulator, see page 280 – Reinforcement section: Fibreglass-reinforced plastic Supply includes: – 2 reinforcement sections – 10 stacking insulators – Assembly parts

280 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Cover systems Form 1

Device module Supply includes: – 2 side parts A For use in air circuit-breaker outgoing/incoming – 2 centre parts sections with a minimum depth of 600 mm. The – Connector parts removable mounting plate may be used for the – Mounting plate configuration e.g. of fuses, air circuit-breakers and switchgear. Note: – Please observe the manufacturer-specific data Material: regarding the arcing space of air circuit-breakers – Side parts, centre parts: Sheet steel – 4 mounting brackets are required to attach a – Mounting plate: Sheet steel, zinc-plated device module Colour: Technical details: – Side parts, centre parts: RAL 7035 Available on the Internet

For enclosure width mm Mounting plate Packs of Model No. Page 600 800 Width mm Height mm ◾ – 420 250 1 pc(s). 9660.700 A – ◾ 620 250 1 pc(s). 9660.710 Also required Mounting bracket 24 pc(s). 9660.090 282

Contact hazard protection Note: – Cut-outs for air circuit-breakers must be pro- cover vided by the customer for TS enclosures with air circuit-breaker – 12 mounting brackets are required to attach the To cover incoming and outgoing sections and contact hazard protection cover NH slimline fuse-switch disconnectors with the Technical details: B Maxi-PLS busbar system in the rear enclosure section so that they are safe from finger contact Available on the Internet (IP2X). Material: – Sheet steel Colour: – RAL 7035 Supply includes: –3 front covers

For enclosures, 1-door B Width mm Height Device module version Packs of Model No. Page 600 800 mm With Without ◾ – 2000 ◾ – 1 set(s) 9660.280 ◾ – 2000 – ◾ 1 set(s) 9660.780 – ◾ 2000 ◾ – 1 set(s) 9660.380 – ◾ 2000 – ◾ 1 set(s) 9660.880 Also required Mounting bracket 24 pc(s). 9660.090 282

Rittal Catalogue 34/Power distribution 281 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Cover systems Form 1

Contact hazard protection Note: – 12 mounting brackets are required to attach the cover contact hazard protection cover For TS enclosures with NH slimline fuse-switch disconnectors Technical details: Available on the Internet C To cover incoming and outgoing sections and NH slimline fuse-switch disconnectors with the Maxi-PLS busbar system in the rear enclosure section so that they are safe from finger contact (IP2X). Material: – Sheet steel Colour: – RAL 7035 Supply includes: –3 front covers –2 depth covers C – 2 side covers – Connector parts

Free installation width mm1) For enclosures when using longitudinal connectors Packs of Model No. Page Width mm Height mm Depth mm Without One side Both sides 600 2000 600 500 450 400 1 set(s) 9660.460 800 2000 600 700 650 600 1 set(s) 9660.470 1000 2000 600 900 850 800 1 set(s) 9660.480 1200 2000 600 1100 1050 1000 1 set(s) 9660.490 Also required Mounting bracket 24 pc(s). 9660.090 282 Accessories Size 00 4 pc(s). 9660.180 282 Blanking cover for NH fused isolators Sizes 1 to 3 4 pc(s). 9660.190 282 1) When using the top-mounted busbars 9649.160/9659.160, see page 268. Longitudinal connectors 9640.191/9650.191 for Maxi-PLS busbars, see page 268.

Mounting bracket Packs of Model No. For attaching the device modules and contact 24 pc(s). 9660.090 hazard protection covers. Tapped hole M6.

Material: 15 40 – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws

For NH slimline Blanking covers Width (B) fuse-switch Packs of Model No. mm To cover free NH slimline fuse-switch disconnector disconnectors slots. Size 00 49.5 4 pc(s). 9660.180 Material: Sizes 1 to 3 99.5 4 pc(s). 9660.190 – Sheet steel Surface finish: – Spray-finished Colour: 600

– RAL 7035 579 Supply includes: – Assembly screws B

282 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

Compartment side panel Material: modules – Sheet steel, 1.5 mm Surface finish: for internal compartmentalisation ◾ Side divider panel for compartments, for locating – Zinc-plated into the TS pitch pattern Supply includes: ◾ Prepared for the location of mounting brackets – Assembly parts for horizontal compartment dividers or mounting plates Accessories: ◾ Two TS system punchings in the side panel module allow the use of additional TS accessories – Gland plates, see page 284 ◾ The side panel modules for reduced compart- – TS punched rail 17 x 17 mm, see page 615 ment depth and an auxiliary construction using – Frame connector piece, see page 622 TS punched rails 17 x 17 mm can be used to – T-connector piece, see page 622 provide a separate enclosure space in the side – Corner connector, see page 622 panel area, e.g. for the provision of a busbar system

With pre-punched For With pre-punched Height knockouts for compartment depth knockouts for Packs of Model No. mm gland plate for mm cable entries M40 cable entry 100 425 2 – 6 pc(s). 9673.051 150 425 – 3 6 pc(s). 9673.055 200 425 – 3 6 pc(s). 9673.052 100 600 2 – 6 pc(s). 9673.061 150 600 – 3 6 pc(s). 9673.065 200 600 – 3 6 pc(s). 9673.062 300 600 – 3 2 pc(s). 9673.063 400 600 – 3 2 pc(s). 9673.064 600 600 – 9 2 pc(s). 9673.066 100 800 2 – 6 pc(s). 9673.081 150 800 – 3 6 pc(s). 9673.085 200 800 – 3 6 pc(s). 9673.082 300 800 – 3 2 pc(s). 9673.083 400 800 – 3 2 pc(s). 9673.084 600 800 – 9 2 pc(s). 9673.086

Compartment side panel Model No. Height Packs of For enclosure depth mm modules mm for cable connection space 600 800 For mounting a Maxi-PLS cable connection bar 450 2 pc(s). 9673.069 9673.089 system. Suitable for cable connection busbar system Number of Material: Maxi-PLS – Sheet steel, 2 mm poles 1600/2000 3-pole ◾ ◾ Surface finish: – Zinc-plated 1600/2000 4-pole ◾ ◾ 3200 3-pole ◾ ◾ Supply includes: – Assembly parts 3200 4-pole – ◾

Also required: – End support, see page 268

Accessories: – 2 compartment side panel modules for internal compartmentalisation with height 150 mm, see page 283

Rittal Catalogue 34/Power distribution 283 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

For side panel modules Gland plates Packs of Model No. height mm for compartment side panel modules (internal compartmentalisation) 150 10 pc(s). 9673.195 For closing cable entries. 200/600 10 pc(s). 9673.192 Material: 300 4 pc(s). 9673.193 – PVC, 3 mm 400 4 pc(s). 9673.194 – Fire protection corresponding to UL 94-V0 Colour: – RAL 7004 Supply includes: – Assembly parts

Terminal box Form 4b For For compartment cable chamber Packs Model No. for modular outgoing section height width of For shielding the connections (terminals) of the com- mm mm partment, busbar space and cable chamber in 150 400/600 1 set(s) 9674.701 accordance with Form 4b to IEC 61 439-2. The terminal boxes are externally mounted on the compart- 200 400/600 1 set(s) 9674.702 ment side panel modules in the cable chamber to 300 400/600 1 set(s) 9674.703 match the heights of the compartments. 400 400/600 1 set(s) 9674.704 If necessary, a clamping strip may be mounted on 600 400/600 1 set(s) 9674.706 the cable retainer included with the supply. Material: – Sheet steel, 1.5 mm Also required: Surface finish: – Compartment side panel modules for internal – Zinc-plated compartmentalisation, see page 283 Supply includes: – Assembly parts Note: – For installation of the connection spaces, the width of the cable chamber must be at least 400 mm

Compartment divider Note: – 2 mounting brackets are required to install one ◾ For the horizontal separation of compartments compartment divider ◾ In combination with the side panel modules, creates form separation to Form 3 or 4 Also required: Material: – Sheet steel, 1.25 mm – Mounting bracket, see page 286 Surface finish: – Zinc-plated

With louvres For For Width Depth enclosure width compartment depth Packs of Model No. mm mm mm mm 400 425 306 445 4 pc(s). 9673.444 400 600 306 588 4 pc(s). 9673.445 400 800 306 788 4 pc(s). 9673.448 600 425 506 445 4 pc(s). 9673.464 600 600 506 588 4 pc(s). 9673.465 600 800 506 788 4 pc(s). 9673.468 800 425 706 445 4 pc(s). 9673.484 800 600 706 588 4 pc(s). 9673.485 800 800 706 788 4 pc(s). 9673.488

284 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

Compartment divider Note: – 2 mounting brackets are required to install one for RiLine busbar systems compartment divider ◾ For the horizontal separation of compartments with integral RiLine distribution busbar system ◾ In combination with the side panel modules, Also required: creates form separation to Form 3 or 4 – Mounting bracket, see page 286 Material: – Sheet steel, 1.25 mm Surface finish: – Zinc-plated

With louvres For For Width Depth enclosure width compartment depth Packs of Model No. mm mm mm mm 600 401 506 413 4 pc(s). 9673.454

Compartment divider Note: – 2 mounting brackets are required to install one with duct for vertical busbar systems compartment divider ◾ For the horizontal separation of compartments with vertical busbars ◾ In combination with the side panel modules, Also required: creates form separation to Form 3 or 4 – Gland plate, see page 285 Material: – Mounting bracket, see page 286 – Sheet steel, 1.25 mm Technical details: Surface finish: Available on the Internet – Zinc-plated

With louvres For For Width Depth Width of duct Depth of duct Packs enclosure width compartment depth Model No. mm mm mm mm of mm mm 400 600 306 588 212 201 4 pc(s). 9673.436 400 800 306 788 212 201 4 pc(s). 9673.438 600 600 506 588 412 201 4 pc(s). 9673.456 600 800 506 788 412 201 4 pc(s). 9673.458 800 600 706 588 612 201 4 pc(s). 9673.476 800 800 706 788 612 201 4 pc(s). 9673.478

Gland plates for compartment divider with duct To cover the duct. Material: – ABS PMMA

For enclosure width Width Height Packs of Model No. mm mm mm 400 250 223.5 4 pc(s). 9673.504 600 450 223.5 4 pc(s). 9673.506 800 650 223.5 4 pc(s). 9673.508

Rittal Catalogue 34/Power distribution 285 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

For enclosure Length of Air circuit-breaker support rails Packs of Model No. width mm mm ◾ For the configuration of air circuit-breakers (ACB) in compartments 400 351 2 pc(s). 9673.004 ◾ The support rail is secured using a mounting 600 551 2 pc(s). 9673.006 bracket 800 751 2 pc(s). 9673.008 Material: – Sheet steel, 2.5 mm Surface finish: Also required: – Zinc-plated – Mounting bracket for compartment divider and air Supply includes: circuit-breaker support rail, see page 286 – Assembly parts – Mounting kit for air circuit-breaker installation, see page 286

For compartment Length Packs Mounting bracket Model No. depth mm mm of for compartment divider ◾ The mounting bracket is secured 425 427 8 pc(s). 9673.4051) – to the TS frame 600 552 8 pc(s). 9673.406 – to the side panel module or 800 752 8 pc(s). 9673.408 – between a frame section and an auxiliary 1) In conjunction with vertical busbar compartment construction separation ◾ Pre-machined mounting openings allow slide-in attachment of compartment dividers Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts

For compartment Length Packs Mounting bracket Model No. depth mm mm of for compartment divider and air circuit-breaker support rail 600 552 2 pc(s). 9673.426 ◾ The mounting bracket is attached to the side 800 752 2 pc(s). 9673.428 panel module ◾ Pre-machined mounting openings allow slide-in attachment of compartment dividers ◾ The air circuit-breaker support rail may be attached to the upper level Material: – Sheet steel, 2 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts

Mounting kit Packs of Model No. for air circuit-breaker installation 1 set(s) 9660.970 For attaching air circuit-breakers (ACB) to air circuit- breaker support rails. Material: – Steel Surface finish: – Zinc-plated Supply includes: – 4 threaded plates (M8/M12)

286 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

Partial mounting plates Material: – Sheet steel, 2 mm with or without duct ◾ For direct attachment to the compartment side Surface finish: panel modules – Zinc-plated ◾ Universal internal installation with switchgear and Supply includes: control devices – 2 angle brackets ◾ Additional mounting levels – Version with duct: ◾ In combination with compartment dividers and Additional square cut-out with insulating plates for side panel modules, internal separation in sealing the cut-out accordance with Form 2, 3 or 4 is possible – Assembly parts

Also required: – Compartment side panel modules for internal compartmentalisation, see page 283

With duct For enclosure width For compartment Width Height Packs of Model No. mm height mm mm mm 600 150 502 143 1 pc(s). 9673.671 600 200 502 193 1 pc(s). 9673.672 600 300 502 293 1 pc(s). 9673.673 600 400 502 393 1 pc(s). 9673.674 800 200 702 193 1 pc(s). 9673.692 800 300 702 293 1 pc(s). 9673.693 800 400 702 393 1 pc(s). 9673.694

Without duct For enclosure width For compartment Width Height Packs of Model No. mm height mm mm mm 400 200 302 193 1 pc(s). 9673.642 400 300 302 293 1 pc(s). 9673.643 400 400 302 393 1 pc(s). 9673.644 400 600 302 593 1 pc(s). 9673.646 400 800 302 793 1 pc(s). 9673.648 600 150 502 143 1 pc(s). 9673.661 600 200 502 193 1 pc(s). 9673.662 600 300 502 293 1 pc(s). 9673.663 600 400 502 393 1 pc(s). 9673.664 600 600 502 593 1 pc(s). 9673.666 600 800 502 793 1 pc(s). 9673.668 600 1000 502 993 1 pc(s). 9673.660 800 150 702 143 1 pc(s). 9673.681 800 200 702 193 1 pc(s). 9673.682 800 300 702 293 1 pc(s). 9673.683 800 400 702 393 1 pc(s). 9673.684 800 600 702 593 1 pc(s). 9673.686 800 800 702 793 1 pc(s). 9673.688 800 1000 702 993 1 pc(s). 9673.680

Rittal Catalogue 34/Power distribution 287 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Compartment configuration Form 1-4

For For Support frame No. of enclosure compart- Packs pitch units Model No. for DIN rail-mounted devices width ment height of 17.5 mm ◾ Support frame set for accepting DIN rail-mounted mm mm devices (e.g. MCBs) 600 150 1 x 24 1 set(s) 9674.761 ◾ The support rails are attached to the compartment side panel modules with two mounting 600 300 2 x 24 1 set(s) 9674.762 brackets 800 300 2 x 36 1 set(s) 9674.782 ◾ The cover is attached to the support frame with knurled screws ◾ In combination with compartment dividers, partial mounting plates and side panel modules, inter- Also required: nal compartmentalisation in accordance with – Compartment side panel modules for internal Form 2, 3 or 4 is possible compartmentalisation, see page 283 Material: – Partial mounting plates, see page 287 – Support frame: Sheet steel 1.5 mm – Cover: Sheet steel 1.5 mm Surface finish: – Support frame: Zinc-plated – Cover: Spray-finished Supply includes: –Support rails – 2 mounting brackets – 1 cover with cut-out – Assembly parts

Coupling set mounting kit For Maxi-PLS busbar system For For for busbar enclosure or riser Packs enclosure width enclosure depth Model No. of The mounting kit is used as a base support for a mm mm vertical Maxi-PLS busbar system/Flat-PLS busbar system. 200 600 1 set(s) 9674.196 200 800 1 set(s) 9674.198 Material: – Sheet steel Surface finish: For Flat-PLS busbar systems For For – Zinc-plated Packs enclosure width enclosure depth Model No. of Supply includes: mm mm –1 mounting plate 400 600 1 set(s) 9674.046 – 2 punched sections with mounting flanges – Version for Flat-PLS busbar system includes 400 800 1 set(s) 9674.048 isolating gland plate – Assembly parts Also required: – End support (for Maxi-PLS busbar system), see page 268

288 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Busbar system

For System attachments Width Height Packs enclosure width Model No. mm mm of for RiLine main busbar system mm System attachment with threaded holes M5 and M6 on a 50 mm pitch pattern for rear assembly of a 400 338.5 362 1 pc(s). 9674.004 RiLine main busbar system. For locating into the 600 538.5 362 1 pc(s). 9674.006 TS frame. 800 738.5 362 1 pc(s). 9674.008 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Note: – RiLine busbar systems, see page 211

Distribution busbars Material: –E-Cu Prepared for the connection of T-connector kits.

Flat bar Cu 30 x 10 mm For distribution busbar systems For distribution busbar system in the behind the compartment compartment (indoors) Length Packs of Model No. For enclosure height mm mm 1800 – 1 pc(s). 1210 9675.218 2000 – 1 pc(s). 1410 9675.210 2200 18001) 1 pc(s). 1610 9675.212 – 20001) 1 pc(s). 1810 9675.220 1)Also suitable as a vertical busbar for PE/PEN/N

PLS 1600 For distribution busbar systems For distribution busbar system in the behind the compartment compartment (indoors) Length Packs of Model No. For enclosure height mm mm 2000 – 1 pc(s). 1350 9675.230 2200 18001) 1 pc(s). 1550 9675.232 – 20001) 1 pc(s). 1750 9675.240 – 22001) 1 pc(s). 1950 9675.242 1)Also suitable as a vertical busbar for PE/PEN/N

Spacer rolls Material: –E-Cu for Maxi-PLS busbars and flat copper bars For use as a universal spacer. Height: 20 mm Hole diameter: 13 mm

For connecting Diameter Cu bar – Cu bar Maxi-PLS – Cu bar Flat-PLS – Cu bar Packs (D) Cross-section Model No. Rated max. Contact area Rated max. Contact area Rated max. of mm size current A mm2 current A mm2 current A mm2 30 550 1100 360 800 380 850 4 pc(s). 9676.503 40 1100 2200 780 1600 670 1400 4 pc(s). 9676.504 13 50 1800 3400 1380 2800 990 2000 4 pc(s). 9676.505 D 20

Rittal Catalogue 34/Power distribution 289 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Fuse-switch disconnector section

Front trim panels Height Model No. for fuse-switch disconnector section mm Packs Version The front trim panels cover above and below the of IP 3X Top Bottom mounting area of the NH fuse-switch disconnector with louvres on the front. 336 136 1 set(s) 9674.340 Protection categories IP 3X/IP 2X of the fuse-switch disconnector section are achieved with integral vent openings. Also required: Material: – Sheet steel, 2 mm – Assembly kit for fuse-switch disconnector section, see page 290 Colour: – Textured RAL 7035 Supply includes: – 2 front trim panels – Assembly parts Note: – In order to achieve protection category IP 2X, the inner perforated plate must be removed

Assembly kit For For NH fused-switch enclosure Packs Model No. for fuse-switch disconnector section disconnector height of Assembly kit for installing fuse-switch disconnector brand mm brands ABB or Jean Müller and attaching the distri- Jean Müller SASIL 2000 1 set(s) 9674.350 bution busbar system. ABB SlimLine 2000 1 set(s) 9674.356 Material: – Section corner piece: Sheet steel, 2 mm – Trim panel: Sheet steel, 2 mm Also required: Surface finish: – Section corner piece: Zinc-plated – Divider panel for fuse-switch disconnector sec- – Trim panel: Spray-finished tion, see page 291 Colour: – Textured RAL 7035 Supply includes: – 2 section corner pieces – 2 trim panels – Assembly parts

290 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Fuse-switch disconnector section

Divider panels For main busbar system in the roof section For For for fuse-switch disconnector section Packs enclosure height enclosure depth Model No. The divider panel is required for interior configura- of mm mm tion of the fused-switch disconnector section, and divides the connection space from the functional 2000 600 1 pc(s). 9674.306 space. Depending on the chosen position of the 2000 800 1 pc(s). 9674.308 main busbar system, the divider panel is fitted in the prepared fuse-switch disconnector enclosures. The prepared cut-outs are suitable for the connection of fuse-switch disconnectors Jean Müller Sasil and ABB SlimLine. Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts

For Dividing plates Installation Packs NH fused-switch Model No. position of for fuse-switch disconnector section disconnector brand Dividing plate to divide the busbar compartment and NH fuse-switch disconnector compartment. Jean Müller SASIL Top/bottom 1 pc(s). 9674.346 ABB SlimLine Top/bottom 1 pc(s). 9674.348 Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Also required: – Assembly kit for fuse-switch disconnector sec- Supply includes: tion, see page 290 – Assembly parts

Contact hazard protection For main busbar system in the roof section For For Packs cover enclosure width enclosure depth Model No. of for fuse-switch disconnector section mm mm (cable chamber) 1000 600 1 set(s) 9674.362 The contact hazard protection cover shields the main busbar in the cable chamber, enabling the safe 1200 600 1 set(s) 9674.366 connection of cables and lines. Suitable for Maxi-PLS and Flat-PLS busbar systems. Also required: Material: – Divider panel for fuse-switch disconnector sec- – Sheet steel, 1.5 mm tion, see page 291 Surface finish: – Zinc-plated Supply includes: –2 covers – 1 mounting bracket – Assembly parts

Rittal Catalogue 34/Power distribution 291 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Fuse-switch disconnector section

Cover Packs of Model No. for distribution busbar 1 set(s) 9674.380 (Jean Müller fuse-switch disconnector section) To cover the distribution busbar system of a fuse- switch disconnector section, designed to accommodate Jean Müller devices. The 150 mm high bus- Also required: bar and cable connection space covers shield the – Punched rail for distribution busbar cover, busbar compartment from the functional space so see page 292 that it is safe from finger contact, with a protection category of IP 20. Suitable for use in enclosures with height 2000 mm and 2200 mm. Material: – PVC, black Supply includes: – 12 busbar covers – 12 cable connection space covers

Punched rail Packs of Model No. for distribution busbar cover 1 set(s) 9674.381 (Jean Müller fuse-switch disconnector section) Required for mounting the distribution busbar cover. Suitable for use in enclosures with height 2000 mm and 2200 mm. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 2 punched rails Note: – 1 pack of punched rails is required for 1 fuse- switch disconnector section

Cover Note: – The cover may be ordered from ABB under order for distribution busbar reference NHP 407062R000X (for ABB/Siemens fuse-switch disconnector – For enclosure height 2000 mm, a height of section) 1500 mm should be covered, and for enclosure To cover the distribution busbar system of a fuse- height 2200 mm, a height of 1700 mm should switch disconnector section, designed to accom- be covered modate ABB (SlimLine) or Siemens (3NJ62) devices. The 200 mm high busbar compartment covers shield the busbar compartment from the functional space so that it is safe from finger contact, with a protection category of IP 20. Material: – PVC, black

292 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Fuse-switch disconnector section

For Busbar support Number Packs busbars Model No. of poles of for fuse-switch disconnector section mm Busbar support for the distribution busbar system of the switch-disconnector-fuse section. 50 x 10 3/4-pole 1 pc(s). 9674.415 60 x 10 3/4-pole 1 pc(s). 9674.416 Material: 80 x 10 3/4-pole 1 pc(s). 9674.418 – Duroplastic polyester 100 x 10 3/4-pole 1 pc(s). 9674.410 Supply includes: – Mounting bracket and screws

Also required: – Assembly kit for fuse-switch disconnector section, see page 290 – End support for fuse-switch disconnector section, see page 293 – Distribution busbar for fuse-switch disconnector section, see page 293

For End support Number Packs busbars Model No. of poles of for fuse-switch disconnector section mm End support for the distribution busbar system of the fuse-switch disconnector section, for vertical 50 x 10 3/4-pole 1 pc(s). 9674.435 support of the distribution busbar system with 60 x 10 3/4-pole 1 pc(s). 9674.436 infeed from above. 80 x 10 3/4-pole 1 pc(s). 9674.438 Material: 100 x 10 3/4-pole 1 pc(s). 9674.430 – Duroplastic polyester Supply includes: – Mounting bracket and screws Also required: – Assembly kit for fuse-switch disconnector section, see page 290 – Distribution busbar for fuse-switch disconnector section, see page 293

Distribution busbars Also required: for fuse-switch disconnector section Distribution busbar to fit the main busbar systems – Busbar support for fuse-switch disconnector sec- Maxi-PLS and Flat-PLS for installation in the fuse- tion, see page 293 switch disconnector sections. – End support for fuse-switch disconnector section, see page 293 Material: – Terminal block for distribution busbar (fuse-switch –E-Cu disconnector section), see page 294

Size mm Length mm For enclosure height mm Packs of Model No. 50 x 10 1632.5 2000 1 pc(s). 9674.405 60 x 10 1632.5 2000 1 pc(s). 9674.406 80 x 10 1632.5 2000 1 pc(s). 9674.408 100 x 10 1632.5 2000 1 pc(s). 9674.400

Rittal Catalogue 34/Power distribution 293 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Fuse-switch disconnector section

Terminal block For busbar width Packs of Model No. for distribution busbar mm (fuse-switch disconnector section) For connecting the connection brackets to the distri- 50/60 1 pc(s). 9674.485 bution busbar system of the fuse-switch disconnec- 80/100 1 pc(s). 9674.488 tor section, no drilling required. Material: –E-Cu Also required: Supply includes: – Connection bracket for fuse-switch disconnector – Assembly parts section, see page 274 Technical details: Available on the Internet

294 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power accessories Software/documentation

Rittal Power Engineering Packs of Model No. Planning software for RiLine busbar systems 1 pc(s). 3020.500 and Ri4Power low-voltage switchgear with design certificate The multi-lingual software package includes the fol- ◾ Generation of special fields configured by the lowing functions: customer with graphical processing in the CAD ◾ Project handling, from the initial enquiry through view to ordering ◾ Import/export interfaces for product and CAD ◾ Configuration of RiLine busbar systems in the TS data enclosure, compact enclosures AE, CM, KS and ◾ Export function for order lists and bills of materi- free-standing enclosure SE als in Excel format ◾ Configuration of low-voltage switchgear with ◾ Interface to EPLAN Electric P8, for the export of Ri4Power systems Form 1-4 and ISV CAD data and bills of materials ◾ Complete, automatic function for the generation ◾ The extra benefit for engineering and planning of bills of materials and a calculation program for offices: Output of detailed tender texts based on quote preparation plants that have been project-planned in Power ◾ Input and evaluation of assembly times to calcu- Engineering in MS Word format late man hours ◾ Output of project-specific assembly plans ◾ Access to the entire range of Rittal products together with field and plant definitions ◾ Output of automatically generated plant ◾ Integral configurator for the generation of draw- documentation with rated current and heat loss ings and bills of materials to create connector kits calculation for connecting air circuit-breakers (ACB) ◾ Simple generation of the design certificate to IEC 61 439 Supply includes: –DVD-ROM Languages: German/English/French/Dutch/ Danish/Swedish/Czech/Italian/Spanish/Polish/ Russian/Chinese

Assembly instructions This documentation is available for downloading at the Rittal website www.rittal.com under “Down- for Ri4Power low-voltage load brochures”. Alternatively, it may be ordered as switchgear a CD. for Form 1-4, with Flat-PLS, Maxi-PLS and RiLine Packs of Model No. These assembly instructions explain the configura- 1 pc(s). 9676.000 tion of type-tested Ri4Power field types and possible busbar systems, divided into 3 sections. The first section explains the assembly sequence for the individual stages of the possible field types in diagram- matic form. The second section provides detailed assembly instructions using diagrams and data tables. The final section explains the installation of optional accessories and general work operations.

Rittal Catalogue 34/Power distribution 295 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com 296 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com Ri4Power ISV distribution enclosures Installation distribution enclosure ◾ Based on baying system TS 8, see page 75 ◾ Based on system enclosure SE 8, see page 81 ◾ Mounting kits, see page 298 Wall-mounted distribution ◾ Based on compact enclosure AE, see page 46 ◾ Mounting kits, see page 298

Extension modules ◾ Easy mounting on support frame or support plate ◾ Individual combination and configuration ◾ Pitch pattern 150 x 250 mm ◾ Extension modules, see page 299

Power distribution components ◾ Bus-mounting fuse bases, see page 236 ◾ NH fuse-switch disconnectors, see page 238 ◾ NH slimline fuse-switch disconnectors, see page 246

Rittal Catalogue 34/Power distribution 297 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Mounting kits

Mounting kits Supply includes: – Mounting aid support for TS, SE – Contact hazard protection For mounting installation modules in TS/SE enclo- – Support for contact hazard protection sures. – Basic supports for frame holders Note: – Assembly parts – TS 8 baying systems, see from page 68 – System enclosures SE 8, see from page 81

For enclosure Packs of Page 8684.500 Design: 8685.500 Sheet steel, spray-finished 8604.500 8606.500 9666.955 9666.915 9666.965 9666.925 8686.500 Model No. 5830.500 Design: 8457.600 Stainless steel 1.4301 – 8452.600 – – – – 5851.500 Model No. Enclosure width mm 600 850 1100 600 Enclosure height mm 2000 2000 2000 1800 Enclosure depth mm 400 600 400 600 400 600 400 500 600 Width unit (WU) 2 3 4 2 Height unit (U) 12 12 12 11 Model No. 1 pc(s). 9666.900 9666.910 9666.920 9666.930 Also required Mounting angle 11 U 2 pc(s). – – – 9666.711 305 Mounting angle 12 U 2 pc(s). 9666.712 9666.712 9666.712 – 305 Depth stay for enclosure 2 pc(s). – – 9666.730 – 305 depth 400/500/600 mm Accessories Cross rail 2 WU 2 pc(s). 9666.722 9666.722 9666.722 9666.722 305 Cross rail 3 WU 2 pc(s). – 9666.723 9666.723 – 305 Cross rail 4 WU 2 pc(s). – – 9666.724 – 305 Mounting angle 2 U 2 pc(s). 9666.702 9666.702 9666.702 9666.702 305 Mounting angle 3 U 2 pc(s). 9666.703 9666.703 9666.703 9666.703 305 Mounting angle 4 U 2 pc(s). 9666.704 9666.704 9666.704 9666.704 305 Mounting angle 5 U 2 pc(s). – – – 9666.705 305 Mounting angle 6 U 2 pc(s). – – – 9666.706 305 Mounting angle 7 U 2 pc(s). – – – 9666.707 305 Depth stay for enclosure 2 pc(s). 9666.730 9666.730 – 9666.730 305 depth 400/500/600 mm Equipment support 4 pc(s). 9666.740 9666.740 9666.740 9666.740 305 connectors 1 WU ≙ 250 mm, 1 U ≙ 150 mm

Mounting kits Supply includes: – Support plates for AE – Spacer brackets For mounting installation modules in AE enclosures. – Contact hazard protection Note: – Angle bracket for contact hazard protection – Compact enclosures AE, see from page 47 – Horizontal mounting angle – Assembly parts

Packs For enclosure Page of Design: Sheet steel, spray-finished 1038.500 1057.500 1076.500 1090.500 1260.500 1213.500 Model No. Design: Stainless steel 1.4301 1008.600 – 1012.600 – – 1019.600 Model No. Design: Stainless steel 1.4404 – – – – – 1019.500 Model No. Enclosure width mm 380 500 600 600 600 1000 Enclosure height mm 600 700 760 1000 1200 1200 Enclosure depth mm 210 250 210 250 300 300 Width unit (WU) 112223 Height unit (U) 344677 Model No. 1 pc(s). 9666.800 9666.810 9666.820 9666.830 9666.840 9666.850 Accessories Mounting angle 3 U 2 pc(s). 9666.753 – – – – – 305 Mounting angle 4 U 2 pc(s). – 9666.754 9666.754 – – – 305 Mounting angle 6 U 2 pc(s). – – – 9666.756 – – 305 Mounting angle 7 U 2 pc(s). – – – – 9666.757 9666.757 305 1 WU ≙ 250 mm, 1 U ≙ 150 mm 298 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Installation modules

Contact hazard protection Material: modules – Cover: Polystyrene (PS) Colour: ◾ For covering free installation areas ◾ Cover is prepared for a lead seal – RAL 7035 Mounting plate modules ◾ With mounting plate made from 2 mm zinc- 1 plated sheet steel ◾ Cover is prepared for a lead seal ◾ Possible installation depth 105 – 140 mm

Contact hazard Size Mounting plate Packs protection Width unit Height unit of Interior Dimensions of Model No. Model No. WU mm U mm installation mounting plate mm 1 250 1 150 1 pc(s). 9666.000 188 x 116 9666.080 2 1 250 2 300 1 pc(s). 9666.010 188 x 266 9666.090 1 250 3 450 1 pc(s). 9666.020 188 x 416 9666.100 1 250 4 600 1 pc(s). 9666.030 188 x 566 9666.110 2 500 1 150 1 pc(s). 9666.040 438 x 116 9666.120 Empty 2 500 2 300 1 pc(s). 9666.050 438 x 266 9666.130 module 2 500 3 450 1 pc(s). 9666.060 438 x 416 9666.140 2 500 4 600 1 pc(s). 9666.070 438 x 566 9666.150 3 750 2 300 1 pc(s). 9666.053 688 x 266 9666.133 3 750 3 450 1 pc(s). 9666.063 688 x 416 9666.143 3 750 4 600 1 pc(s). 9666.073 – – 1 WU ≙ 250 mm 1 U ≙ 150 mm

Support rail modules Material: – Cover: Polystyrene (PS) ◾ For installing terminal blocks, switchgear, etc. ◾ Support rails 35/15 mm Colour: ◾ Adjustable on a 25 mm pitch pattern – RAL 7035 ◾ Cover is prepared for a lead seal Accessories: DIN rail mounted device – Cover strips for DIN rail mounted device modules, 1 modules see page 304 ◾ To accommodate DIN rail mounted devices ◾ Support rails 35/15 mm ◾ Cover is prepared for a lead seal

Size Support rails DIN rail mounted devices Packs Width unit Height unit Number of Mechanical interior of Model No. Model No. WU mm U mm support rails installation1) 12 divider units 1 250 1 150 1 pc(s). 1 9666.160 9666.240 (1 x 12 x 18 mm) 2 24 divider units 1 250 2 300 1 pc(s). 2 9666.170 9666.250 (2 x 12 x 18 mm) 36 divider units 1 250 3 450 1 pc(s). 3 9666.180 9666.260 (3 x 12 x 18 mm) 48 divider units 1 250 4 600 1 pc(s). 4 9666.190 9666.270 (4 x 12 x 18 mm) 24 divider units 2 500 1 150 1 pc(s). 1 9666.200 9666.280 (2 x 12 x 18 mm) 48 divider units 2 500 2 300 1 pc(s). 2 9666.210 9666.290 (4 x 12 x 18 mm) 72 divider units 2 500 3 450 1 pc(s). 3 9666.220 9666.300 (6 x 12 x 18 mm)

2 500 4 600 1 pc(s). 4 9666.230 – –

72 divider units 3 750 2 300 1 pc(s). 2 9666.213 9666.293 (6 x 12 x 18 mm) 108 divider units 3 750 3 450 1 pc(s). 3 9666.223 9666.303 (9 x 12 x 18 mm) 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) No. of fields x divider units x width

Rittal Catalogue 34/Power distribution 299 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Installation modules

Connection terminal blocks Material: – Duroplastic ◾ For connecting copper and aluminium conductors Colour: ◾ Single-wire or multi-wire conductors with – RAL 7035 crimped wire end ferrule or laminated copper bar

Clamping area for 1 Connection of round Packs Design laminated copper bars, Model No. Page conductors mm2 of W x H mm 1 x 16 – 150 or 250 A, 5-pole 17 x 21 1 pc(s). 9666.340 2 x 16 – 70 1 x 50 – 240 or 400 A, 5-pole 25 x 21 1 pc(s). 9666.350 2 x 25 – 120 Also required Size Packs Description Width unit Height unit Model No. of WU mm U mm 2 Mounting kit for connec- 1 250 3 450 1 pc(s). 9666.310 tion terminal block Contact hazard protection 1 250 3 450 1 pc(s).9666.020 299 modules Accessories Laminated copper bars 255 1 WU ≙ 250 mm 1 U ≙ 150 mm

NH fuse-switch disconnector Material: modules – Cover: Polystyrene (PS) Colour: ◾ Suitable for the accommodation of NH fuse- – RAL 7035 switch disconnectors for mounting plate assembly Note: ◾ Cover is prepared for a lead seal – Blanking cover 9666.665 should be used to seal unneeded cut-outs for NH fuse-switch disconnectors size 00

To fit NH disconnector Size Packs Width unit Height unit Model No. Page Size Model No. of WU mm U mm 2 pc(s). size 00 9344.000/.010/ 1 250 2 300 1 pc(s). 9666.380 4 pc(s). size 00 .020/.030/.040/.050 2 500 2 300 1 pc(s). 9666.390 9344.100/.110/ 1 pc(s). size 1 1 250 3 450 1 pc(s). 9666.400 130/.150 9344.200/.210/ 1 pc(s). size 2 1 250 3 450 1 pc(s). 9666.410 230/.250 1 pc(s). size 3 or 9344.300/.310/ 1 pc(s). 9666.0601) 299 2 500 3 450 2 pc(s). size 2 330/.350 1 pc(s). 9666.4201) 300 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) Module unit consisting of disconnector cross-member 9666.420 and contact hazard protection module 9666.060

Disconnector cross-member for NH fuse-switch disconnector, size 2/3 ◾ Suitable for the accommodation of NH fuse- switch disconnectors for mounting plate assembly

To fit NH disconnector Size Packs Width unit Height unit Model No. Page Size Model No. of WU mm U mm 1 pc(s). size 3 or 9344.300/.310/ 2 500 3 450 1 pc(s). 9666.420 2 pc(s). size 2 330/.350 Also required Contact hazard protection modules 1 pc(s). 9666.060 299

300 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Installation modules

NH slimline fuse-switch Note: – Busbars are not included with the supply disconnector modules – In order to ensure problem-free cable connec- For NH slimline fuse-switch disconnectors, sizes 00 tion, a contact hazard protection module or an to 3 (100/185 mm bar centre distance). N/PE busbar module must be installed above or Material: below the NH slimline fuse-switch disconnector modules – Cover: Polystyrene (PS) Colour: – RAL 7035

To fit Size NH slimline fuse- Packs Design Width unit Height unit Model No. Page switch disconnectors of Model No. WU mm U mm 100 mm module, 3-pole, 1 250 3 450 1 pc(s). 9666.570 max. 3 x size 00 100 mm module, 9346.020 3-pole, 2 500 3 450 1 pc(s). 9666.580 9346.030 max. 6 x size 00 100 mm module, 3-pole, 3 750 3 450 1 pc(s). 9666.583 max. 10 x size 00 185 mm module, 3-pole, 2 500 5 750 1 pc(s). 9666.550 max. 8 x size 00/ 9346.040 4 x size 1, 2, 3 9346.050 9346.110/.115 185 mm module, 9346.210/.215 3-pole, 9346.310/.315 3 750 5 750 1 pc(s). 9666.560 max. 12 x size 00/ 6 x size 1, 2, 3 Also required Contact hazard protection modules 299 Busbar modules N/PE 302 1 WU ≙ 250 mm 1 U ≙ 150 mm

Circuit-breaker modules Note: – Attachment of the circuit-breakers and the corre- ◾ Suitable for accommodating standard moulded- sponding cut-out dimensions for the cover are case circuit-breakers from ABB, Eaton, Schnei- shown in the enclosed assembly instructions der Electric and Siemens – Circuit-breakers are not included with the supply ◾ Cover is prepared for a lead seal Material: – Cover: Polystyrene (PS) Colour: – RAL 7035

Size Packs For moulded-case circuit-breakers Width unit Height unit Model No. of WU mm U mm up to 250 A 1 250 2 300 1 pc(s). 9666.430 up to 630 A 2 500 3 450 1 pc(s). 9666.440 1 WU ≙ 250 mm 1 U ≙ 150 mm

Rittal Catalogue 34/Power distribution 301 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Installation modules

Meter mounting board module Note: – The meter mounting board module does not ◾ Open module for internal measurements comply with meter mounting board standard ◾ Clearance depth available for meter installation DIN 43 870/VDE 0603 and does not meet the 170 mm conditions for total insulation. Use in unmetered Material: areas only by arrangement with the local elec- – Meter mounting board: Polystyrene (PS) tricity supply company. – 1 contact hazard protection module/DIN rail Colour: mounted device module with 1 WU and at least – RAL 7035 1 U is required both above and below the module

Size Packs Width unit Height unit Model No. Page of WU mm U mm 1 250 3 450 1 pc(s). 9666.640 Also required Contact hazard protection modules 299 Support rail modules 299 DIN rail mounted device modules 299 1 WU ≙ 250 mm 1 U ≙ 150 mm

Busbar modules N/PE Note: – Copper or CUPONAL busbars should be ordered ◾ For attaching the busbars for N and PE separately, see page 252 ◾ Cover is prepared for a lead seal – Not suitable for use in mounting kit AE Material: – Cover: Polystyrene (PS) Colour: – RAL 7035

Size Packs For busbars mm Width unit Height unit Model No. of WU mm U mm 1 250 2 300 1 pc(s). 9666.590 12 x 5 to 30 x 10 mm 2 500 2 300 1 pc(s). 9666.600 3 750 2 300 1 pc(s). 9666.603 1 WU ≙ 250 mm 1 U ≙ 150 mm

302 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Installation modules

Busbar modules Note: – Busbars are not included with the supply For assembling bus-mounting fuse bases E18, E27, E33 and D-Switch as well as NH fuse-switch disconnectors sizes 000 and 00 (3-pole, 60 mm bar centre distance). Material: – Cover: Polystyrene (PS) Colour: – RAL 7035

Size To fit Width unit Height unit Fusible elements Packs NH disconnectors Model No. Page for busbar systems of Model No. WU mm U mm Model No. 9343.0001) 9343.0201) 9343.0401) 1 250 2 300 1 pc(s). 9666.520 3431.020 3418.010 3431.030 3427.010 3431.035 3433.010 3431.020 2 500 2 300 9340.950 3431.030 1 pc(s). 9666.530 3431.035 3431.020 3 750 2 300 3431.030 1 pc(s). 9666.533 3431.035 Accessories Blanking cover 10 pc(s). 9666.660 304 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) A depth extension frame 9666.680 should additionally be used to ensure unrestricted connection. NH fuse-switch disconnectors size 00 cannot be combined with other equipment.

Rittal Catalogue 34/Power distribution 303 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Accessories

Cover strips Packs of Model No. for DIN rail mounted device modules 5 pc(s). 9666.650 For blanking spare component cut-outs in DIN rail mounted device modules, max. 12 divider units (12 x 18 mm), divisible every 9 mm. Material: –ABS Colour: – RAL 7035

Blanking cover Packs of Model No. ◾ For blanking unused cut-outs 10 pc(s). 9666.660 ◾ To fit bus-mounting fuse base, D-Switch and NH fuse-switch disconnector size 000 (3-pole, 60 mm busbar systems) in busbar modules (9666.520/.530/.533) ◾ Width: 16 – 34 mm variable Material: – Polypropylene (PP) Colour: – RAL 7035

Blanking cover Packs of Model No. for disconnectors, size 00 1 pc(s). 9666.665 ◾ For blanking unused cut-outs with NH fuse- switch disconnectors size 00 in NH fuse-switch disconnector modules (9666.380/.390) ◾ Width: 117 mm Material: –PVC Colour: – RAL 7035

Wiring brackets Packs of Model No. For tool-free attachment to support rails TS 35/15, 10 pc(s). 9666.670 for cable routing on the rear of support rail modules. Material: – Polyamide (PA 6.6)

Depth extension frame Size Packs Width unit Height unit Model No. For extending the depth of the contact hazard pro- of tection cover. Allows unrestricted connection of WU mm U mm NH fuse-switch disconnectors, size 00 (3-pole, 1 250 2 300 1 pc(s). 9666.680 60 mm busbar systems). 1 WU ≙ 250 mm Material: 1 U ≙ 150 mm – Polystyrene (PS) Colour: Note: – RAL 7035 – NH fuse-switch disconnectors size 00 with covers and depth extension frame cannot be used in conjunction with other equipment

304 Rittal Catalogue 34/Power distribution Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com ISV distribution enclosures Accessories

Width unit Packs Cross rails Model No. for TS, SE WU mm of For horizontal sub-division of the support frame in 2 500 2 pc(s). 9666.722 the TS/SE enclosure. 3 750 2 pc(s). 9666.723 Material: 4 1000 2 pc(s). 9666.724 – Sheet steel 1 WU ≙ 250 mm Surface finish: – Zinc-plated

Height unit Packs Mounting angles Model No. for TS, SE Ummof For vertical sub-division of the support frame in the 2 300 2 pc(s). 9666.702 TS/SE enclosure. 3 450 2 pc(s). 9666.703 Material: 4 600 2 pc(s). 9666.704 – Sheet steel 5 750 2 pc(s). 9666.705 Surface finish: 6 900 2 pc(s). 9666.706 – Zinc-plated 7 1050 2 pc(s). 9666.707 11 1650 2 pc(s). 9666.711 12 1800 2 pc(s). 9666.712 1 U ≙ 150 mm

Accessories: – Equipment support connector, see page 305

Height unit Packs Mounting angles Model No. for AE Ummof For vertical sub-division of the support frame in the 3 450 2 pc(s). 9666.753 AE enclosure. 4 600 2 pc(s). 9666.754 Material: 6 900 2 pc(s). 9666.756 – Sheet steel 7 1050 2 pc(s). 9666.757 Surface finish: 1 U ≙ 150 mm – Zinc-plated

Depth stay Packs of Model No. ◾ For enclosure depth 400/500/600 mm 2 pc(s). 9666.730 ◾ For attaching the support frame in the TS/SE enclosure Material: – Sheet steel Surface finish: – Zinc-plated

Equipment support connector Packs of Model No. ◾ For connecting 2 mounting angles for TS/SE 4 pc(s). 9666.740 ◾ Increases the stability of the frame structure Material: – T-section: Aluminium

Rittal Catalogue 34/Power distribution 305 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com