Sodium Sulfate - Wikipedia, the Free Encyclopedia Page 1 of 7

Total Page:16

File Type:pdf, Size:1020Kb

Sodium Sulfate - Wikipedia, the Free Encyclopedia Page 1 of 7 Sodium sulfate - Wikipedia, the free encyclopedia Page 1 of 7 Sodium sulfate From Wikipedia, the free encyclopedia Sodium sulfate is the sodium salt of Sodium sulfate sulfuric acid. When anhydrous, it is a white crystalline solid of formula Na2SO4 known as the mineral thenardite; the decahydrate Na2SO4·10H2O has been known as Glauber's salt or, historically, sal mirabilis since the 17th century. Another Other names solid is the heptahydrate, which transforms Thenardite (mineral) to mirabilite when cooled. With an annual Glauber's salt (decahydrate) production of 6 million tonnes, it is a major Sal mirabilis (decahydrate) commodity chemical and one of the most Mirabilite (decahydrate) damaging salts in structure conservation: when it grows in the pores of stones it can Identifiers achieve high levels of pressure, causing CAS number 7757-82-6 , structures to crack. 7727-73-3 (decahydrate) Sodium sulfate is mainly used for the PubChem 24436 manufacture of detergents and in the Kraft ChemSpider 22844 process of paper pulping. About two-thirds UNII 36KCS0R750 of the world's production is from mirabilite, the natural mineral form of the decahydrate, RTECS number WE1650000 and the remainder from by-products of Jmol-3D images Image 1 chemical processes such as hydrochloric (http://chemapps.stolaf.edu/jmol/jmol.php? acid production. model=%5BNa%2B%5D.%5BNa%2B% 5D.%5BO-%5DS%28%5BO-%5D%29% 28%3DO%29%3DO) Contents SMILES InChI ■ 1History ■ 2 Physical and chemical properties Properties ■ 3 Production Molecular Na2SO4 ■ 3.1 Natural sources formula ■ 3.2 Chemical industry Molar mass 142.04 g/mol (anhydrous) ■ 4 Applications 322.20 g/mol (decahydrate) ■ 4.1 Commodity industries Appearance white crystalline solid ■ 4.2 Thermal storage ■ 4.3 Small-scale applications hygroscopic Density 2.664 g/cm3 (anhydrous) ■ 5 Safety 3 ■ 6 References 1.464 g/cm (decahydrate) ■ 7 External links Melting point 884 °C (anhydrous) 32.4 °C (decahydrate) History Boiling point 1429 °C (anhydrous) Solubility in 47.6 g/L (0 °C) water 427 g/L (100 °C) http://en.wikipedia.org/wiki/Sodium_sulfate 06/07/2011 Sodium sulfate - Wikipedia, the free encyclopedia Page 2 of 7 The hydrate of sodium sulfate is known as Solubility insoluble in ethanol Glauber's Salt after the Dutch/German Refractive index 1.468 (anhydrous) chemist and apothecary Johann Rudolf (n ) 1.394 (decahydrate) Glauber (1604–1670), who discovered it in D 1625 in Austrian spring water. He named it Structure sal mirabilis (miraculous salt), because of Crystal structure orthorhombic or hexagonal (anhydrous) its medicinal properties: the crystals were monoclinic (decahydrate) used as a general purpose laxative, until more sophisticated alternatives came about Hazards in the 1900s.[1][2] MSDS External MSDS EU Index Not listed In the 18th century, Glauber's salt began to Main hazards Irritant be used as a raw material for the industrial production of soda ash (sodium carbonate), NFPA 704 0 by reaction with potash (potassium 10 carbonate). Demand for soda ash increased and supply of sodium sulfate had to increase in line. Therefore, in the nineteenth century, the Leblanc process, producing Flash point Non-flammable synthetic sodium sulfate as a key Related compounds intermediate, became the principal method Other anions Sodium selenate [3] of soda ash production. Sodium tellurate Other cations Lithium sulfate Physical and chemical Potassium sulfate properties Rubidium sulfate Caesium sulfate Sodium sulfate is chemically very stable, Related Sodium bisulfate being unreactive toward most oxidising or compounds Sodium sulfite reducing agents at normal temperatures. At Sodium persulfate high temperatures, it can be reduced to sodium sulfide:[4] Supplementary data page Structure and n, εr, etc. Na2SO4 + 2 C → 2 Na2S + 2 CO2(g) properties Thermodynamic Phase behaviour Sodium sulfate is a neutral salt, which forms aqueous solutions with pH of 7. The data Solid, liquid, gas neutrality of such solutions reflects the fact Spectral data UV, IR, NMR, MS that Na2SO4 is derived, formally speaking, (what is this?) (verify) from the strong acid sulfuric acid and a Except where noted otherwise, data are given for materials in strong base sodium hydroxide. Sodium sulfate reacts with an equivalent amount of their standard state (at 25 °C, 100 kPa) sulfuric acid to give an equilibrium Infobox references concentration of the acid salt sodium bisulfate:[5][6] Na2SO4(aq) + H2SO4(aq) ⇌ 2 NaHSO4(aq) In fact, the equilibrium is very complex, depending on concentration and temperature, with other acid salts being present. + 2− Sodium sulfate is a typical ionic sulfate, containing Na ions and SO4 ions. Aqueous solutions can http://en.wikipedia.org/wiki/Sodium_sulfate 06/07/2011 Sodium sulfate - Wikipedia, the free encyclopedia Page 3 of 7 produce precipitates when combined with salts of Ba2+ or Pb2+, which form insoluble sulfates Na2SO4(aq) + BaCl2(aq) → 2 NaCl(aq) + BaSO4(s) Sodium sulfate has unusual solubility characteristics in water.[7] Its solubility in water rises more than tenfold between 0 °C to 32.384 ° C, where it reaches a maximum of 497 g/L. At this point the solubility curve changes slope, and the solubility becomes almost independent of temperature. This temperature at 32.384 °C, corresponding to the release of crystal water and melting of the hydrated salt, serves as an accurate temperature reference for thermometer calibration. Sodium sulfate decahydrate is also unusual among hydrated salts in having a measureable residual entropy (entropy at absolute zero) of 6.32 J·K−1·mol−1. This is ascribed to its ability to distribute water much more rapidly compared to most hydrates.[8] Sodium sulfate displays a moderate tendency to form double salts. The only alums formed with common trivalent metals are NaAl(SO4)2 (unstable above 39 °C) and NaCr(SO4)2, in contrast to potassium sulfate and ammonium sulfate which form many stable alums.[9] Double salts with some other alkali metal sulfates are known, including Na2SO4·3K2SO4 which occurs naturally as the mineral glaserite. Formation of glaserite by reaction of sodium sulfate with potassium chloride has been used as the basis of a method for producing potassium sulfate, a fertiliser.[10] Other double salts [11] include 3Na2SO4·CaSO4, 3Na2SO4·MgSO4 (vanthoffite) and NaF·Na2SO4. Production The world production of sodium sulfate, mostly in the form of the decahydrate amounts to approximately 5.5 to 6 million tonnes annually (Mt/a). In 1985, production was 4.5 Mt/a, half from natural sources, and half from chemical production. After 2000, at a stable level until 2006, natural production had increased to 4 Mt/a, and chemical production decreased to 1.5 to 2 Mt/a, with a total of 5.5 to 6 Mt/a.[12][13][14][15] For all applications, naturally produced and chemically produced sodium sulfate are practically interchangeable. Natural sources Two thirds of the world's production of the decahydrate (Glauber's salt) is from the natural mineral form mirabilite, for example as found in lake beds in southern Saskatchewan. In 1990, Mexico and Spain were the world's main producers of natural sodium sulfate (each around 500,000 tonnes), with Russia, US and Canada around 350,000 tonnes each.[13] Natural resources are estimated as over 1 billion tonnes.[12][13] Major producers of 200,000–1,500,000 tonnes/a in 2006 include Searles Valley Minerals (California, US), Airborne Industrial Minerals (Saskatchewan, Canada), Química del Rey (Coahuila, Mexico), Criaderos Minerales Y Derivados and Minera de Santa Marta, also known as Grupo Crimidesa (Burgos, Spain), FMC Foret (Toledo, Spain), Sulquisa (Madrid, Spain), and in China Chengdu http://en.wikipedia.org/wiki/Sodium_sulfate 06/07/2011 Sodium sulfate - Wikipedia, the free encyclopedia Page 4 of 7 Sanlian Tianquan Chemical (Sichuan), Hongze Yinzhu Chemical Group (Jiangsu), Nafine Chemical Industry Group (Shanxi), and Sichuan Province Chuanmei Mirabilite (Sichuan), and Kuchuksulphat JSC (Altai Krai, Siberia, Russia).[12][14] Anhydrous sodium sulfate occurs in arid environments as the mineral thenardite. It slowly turns to mirabilite in damp air. Sodium sulfate is also found as glauberite, a calcium sodium sulfate mineral. Both minerals are less common than mirabilite. Chemical industry About one third of the world's sodium sulfate is produced as by-product of other processes in chemical industry. Most of this production is chemically inherent to the primary process, and only marginally economical. By effort of the industry, therefore, sodium sulfate production as by-product is declining. The most important chemical sodium sulfate production is during hydrochloric acid production, either from sodium chloride (salt) and sulfuric acid, in the Mannheim process, or from sulfur dioxide in the Hargreaves process.[16][17] The resulting sodium sulfate from these processes are known as salt cake. Mannheim: 2 NaCl + H2SO4 → 2 HCl + Na2SO4 Hargreaves: 4 NaCl + 2 SO2 + O2 + 2 H2O → 4 HCl + 2 Na2SO4 The second major production of sodium sulfate are the processes where surplus sulfuric acid is neutralised by sodium hydroxide, as applied on a large scale in the production of rayon. This method is also a regularly applied and convenient laboratory preparation. 2 NaOH(aq) + H2SO4(aq) → Na2SO4(aq) + 2 H2O(l) Formerly, sodium sulfate was also a by-product of the manufacture of sodium dichromate, where sulfuric acid is added to sodium chromate solution forming sodium dichromate, or subsequently chromic acid. Alternatively, sodium sulfate is or was formed in the production of lithium
Recommended publications
  • WO 2015/084416 Al 11 June 2015 (11.06.2015) P O P C T
    (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International Publication Date WO 2015/084416 Al 11 June 2015 (11.06.2015) P O P C T (51) International Patent Classification: (81) Designated States (unless otherwise indicated, for every C09K 8/05 (2006.01) C07C 51/42 (2006.01) kind of national protection available): AE, AG, AL, AM, COW 17/00 (2006.01) E21B 21/06 (2006.01) AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, (21) Number: International Application DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, PCT/US20 13/076445 HN, HR, HU, ID, IL, IN, IR, IS, JP, KE, KG, KN, KP, KR, (22) International Filing Date: KZ, LA, LC, LK, LR, LS, LT, LU, LY, MA, MD, ME, 19 December 2013 (19. 12.2013) MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SA, (25) Filing Language: English SC, SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, (26) Publication Language: English TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW. (30) Priority Data: 61/910,976 3 December 2013 (03. 12.2013) US (84) Designated States (unless otherwise indicated, for every kind of regional protection available): ARIPO (BW, GH, (71) Applicant: CABOT CORPORATION [US/US]; Two GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, SZ, TZ, Seaport Lane, Suite 1300, Boston, MA 01220 (US).
    [Show full text]
  • 1 Abietic Acid R Abrasive Silica for Polishing DR Acenaphthene M (LC
    1 abietic acid R abrasive silica for polishing DR acenaphthene M (LC) acenaphthene quinone R acenaphthylene R acetal (see 1,1-diethoxyethane) acetaldehyde M (FC) acetaldehyde-d (CH3CDO) R acetaldehyde dimethyl acetal CH acetaldoxime R acetamide M (LC) acetamidinium chloride R acetamidoacrylic acid 2- NB acetamidobenzaldehyde p- R acetamidobenzenesulfonyl chloride 4- R acetamidodeoxythioglucopyranose triacetate 2- -2- -1- -β-D- 3,4,6- AB acetamidomethylthiazole 2- -4- PB acetanilide M (LC) acetazolamide R acetdimethylamide see dimethylacetamide, N,N- acethydrazide R acetic acid M (solv) acetic anhydride M (FC) acetmethylamide see methylacetamide, N- acetoacetamide R acetoacetanilide R acetoacetic acid, lithium salt R acetobromoglucose -α-D- NB acetohydroxamic acid R acetoin R acetol (hydroxyacetone) R acetonaphthalide (α)R acetone M (solv) acetone ,A.R. M (solv) acetone-d6 RM acetone cyanohydrin R acetonedicarboxylic acid ,dimethyl ester R acetonedicarboxylic acid -1,3- R acetone dimethyl acetal see dimethoxypropane 2,2- acetonitrile M (solv) acetonitrile-d3 RM acetonylacetone see hexanedione 2,5- acetonylbenzylhydroxycoumarin (3-(α- -4- R acetophenone M (LC) acetophenone oxime R acetophenone trimethylsilyl enol ether see phenyltrimethylsilyl... acetoxyacetone (oxopropyl acetate 2-) R acetoxybenzoic acid 4- DS acetoxynaphthoic acid 6- -2- R 2 acetylacetaldehyde dimethylacetal R acetylacetone (pentanedione -2,4-) M (C) acetylbenzonitrile p- R acetylbiphenyl 4- see phenylacetophenone, p- acetyl bromide M (FC) acetylbromothiophene 2- -5-
    [Show full text]
  • High Purity Inorganics
    High Purity Inorganics www.alfa.com INCLUDING: • Puratronic® High Purity Inorganics • Ultra Dry Anhydrous Materials • REacton® Rare Earth Products www.alfa.com Where Science Meets Service High Purity Inorganics from Alfa Aesar Known worldwide as a leading manufacturer of high purity inorganic compounds, Alfa Aesar produces thousands of distinct materials to exacting standards for research, development and production applications. Custom production and packaging services are part of our regular offering. Our brands are recognized for purity and quality and are backed up by technical and sales teams dedicated to providing the best service. This catalog contains only a selection of our wide range of high purity inorganic materials. Many more products from our full range of over 46,000 items are available in our main catalog or online at www.alfa.com. APPLICATION FOR INORGANICS High Purity Products for Crystal Growth Typically, materials are manufactured to 99.995+% purity levels (metals basis). All materials are manufactured to have suitably low chloride, nitrate, sulfate and water content. Products include: • Lutetium(III) oxide • Niobium(V) oxide • Potassium carbonate • Sodium fluoride • Thulium(III) oxide • Tungsten(VI) oxide About Us GLOBAL INVENTORY The majority of our high purity inorganic compounds and related products are available in research and development quantities from stock. We also supply most products from stock in semi-bulk or bulk quantities. Many are in regular production and are available in bulk for next day shipment. Our experience in manufacturing, sourcing and handling a wide range of products enables us to respond quickly and efficiently to your needs. CUSTOM SYNTHESIS We offer flexible custom manufacturing services with the assurance of quality and confidentiality.
    [Show full text]
  • Chemical Names and CAS Numbers Final
    Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number C3H8O 1‐propanol C4H7BrO2 2‐bromobutyric acid 80‐58‐0 GeH3COOH 2‐germaacetic acid C4H10 2‐methylpropane 75‐28‐5 C3H8O 2‐propanol 67‐63‐0 C6H10O3 4‐acetylbutyric acid 448671 C4H7BrO2 4‐bromobutyric acid 2623‐87‐2 CH3CHO acetaldehyde CH3CONH2 acetamide C8H9NO2 acetaminophen 103‐90‐2 − C2H3O2 acetate ion − CH3COO acetate ion C2H4O2 acetic acid 64‐19‐7 CH3COOH acetic acid (CH3)2CO acetone CH3COCl acetyl chloride C2H2 acetylene 74‐86‐2 HCCH acetylene C9H8O4 acetylsalicylic acid 50‐78‐2 H2C(CH)CN acrylonitrile C3H7NO2 Ala C3H7NO2 alanine 56‐41‐7 NaAlSi3O3 albite AlSb aluminium antimonide 25152‐52‐7 AlAs aluminium arsenide 22831‐42‐1 AlBO2 aluminium borate 61279‐70‐7 AlBO aluminium boron oxide 12041‐48‐4 AlBr3 aluminium bromide 7727‐15‐3 AlBr3•6H2O aluminium bromide hexahydrate 2149397 AlCl4Cs aluminium caesium tetrachloride 17992‐03‐9 AlCl3 aluminium chloride (anhydrous) 7446‐70‐0 AlCl3•6H2O aluminium chloride hexahydrate 7784‐13‐6 AlClO aluminium chloride oxide 13596‐11‐7 AlB2 aluminium diboride 12041‐50‐8 AlF2 aluminium difluoride 13569‐23‐8 AlF2O aluminium difluoride oxide 38344‐66‐0 AlB12 aluminium dodecaboride 12041‐54‐2 Al2F6 aluminium fluoride 17949‐86‐9 AlF3 aluminium fluoride 7784‐18‐1 Al(CHO2)3 aluminium formate 7360‐53‐4 1 of 75 Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number Al(OH)3 aluminium hydroxide 21645‐51‐2 Al2I6 aluminium iodide 18898‐35‐6 AlI3 aluminium iodide 7784‐23‐8 AlBr aluminium monobromide 22359‐97‐3 AlCl aluminium monochloride
    [Show full text]
  • Provisional Peer-Reviewed Toxicity Values for Rubidium Compounds
    EPA/690/R-16/012F l Final 9-02-2016 Provisional Peer-Reviewed Toxicity Values for Rubidium Compounds (CASRN 7440-17-7, Rubidium) (CASRN 7791-11-9, Rubidium Chloride) (CASRN 1310-82-3, Rubidium Hydroxide) (CASRN 7790-29-6, Rubidium Iodide) Superfund Health Risk Technical Support Center National Center for Environmental Assessment Office of Research and Development U.S. Environmental Protection Agency Cincinnati, OH 45268 AUTHORS, CONTRIBUTORS, AND REVIEWERS CHEMICAL MANAGERS Puttappa R. Dodmane, BVSc&AH, MVSc, PhD National Center for Environmental Assessment, Cincinnati, OH Scott C. Wesselkamper, PhD National Center for Environmental Assessment, Cincinnati, OH DRAFT DOCUMENT PREPARED BY SRC, Inc. 7502 Round Pond Road North Syracuse, NY 13212 PRIMARY INTERNAL REVIEWER Paul G. Reinhart, PhD, DABT National Center for Environmental Assessment, Research Triangle Park, NC This document was externally peer reviewed under contract to: Eastern Research Group, Inc. 110 Hartwell Avenue Lexington, MA 02421-3136 Questions regarding the contents of this PPRTV assessment should be directed to the EPA Office of Research and Development’s National Center for Environmental Assessment, Superfund Health Risk Technical Support Center (513-569-7300). ii Rubidium Compounds TABLE OF CONTENTS COMMONLY USED ABBREVIATIONS AND ACRONYMS .................................................. iv BACKGROUND .............................................................................................................................1 DISCLAIMERS ...............................................................................................................................1
    [Show full text]
  • Manuscript with Contribution from All the Other Coauthors
    1 Interactions of organosulfates with water vapor under sub- and supersaturated 2 conditions 3 4 Chao Peng,1,2 Patricia N. Razafindrambinina,3 Kotiba A. Malek,4 Lanxiadi Chen,1,2,7 Weigang 5 Wang,5 Ru-Jin Huang,6 Yuqing Zhang,1,2 Xiang Ding,1,2 Maofa Ge,5 Xinming Wang,1,2 Akua A. 6 Asa-Awuku,3,4 and Mingjin Tang1,2,7,* 7 8 1 State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environmental 9 Protection and Resources Utilization, and Guangdong-Hong Kong-Macao Joint Laboratory for 10 Environmental Pollution and Control, Guangzhou Institute of Geochemistry, Chinese Academy of 11 Sciences, Guangzhou 510640, China 12 2 CAS Center for Excellence in Deep Earth Science, Guangzhou 510640, China 13 3 Department of Chemistry and Biochemistry, College of Computer, Mathematical and Natural 14 Sciences, University of Maryland, College Park, MD 20742, USA 15 4 Department of Chemical and Biomolecular Engineering, A. James Clark School of Engineering, 16 University of Maryland, College Park, MD 20742, USA 17 5 State Key Laboratory for Structural Chemistry of Unstable and Stable Species, Beijing National 18 Laboratory for Molecular Sciences, CAS Research/Education Center for Excellence in Molecular 19 Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China 20 6 Key Laboratory of Aerosol Chemistry and Physics, State Key Laboratory of Loess and 21 Quaternary Geology, Institute of Earth and Environment, Chinese Academy of Sciences, Xi'an 22 710061, China 1 23 7 University of Chinese Academy of Sciences, Beijing 100049, China 24 25 *Correspondence: Mingjin Tang ([email protected]) 26 27 2 28 Abstract 29 Organosulfates (OS) are important constituents of secondary organic aerosols, but their 30 hygroscopic properties and cloud condensation nucleation (CCN) activities have not been well 31 understood.
    [Show full text]
  • Nextal Amso4 Suite MSDS
    SAFETY DATA SHEET NeXtal AmSO4 Suite Version 2.0 Revision Date 03/31/2020 Print Date 03/31/2020 SECTION 1. IDENTIFICATION Product name : NeXtal AmSO4 Suite Manufacturer or supplier's details Company : NeXtal 6201 Trust Dr Holland, OH 43528 USA Telephone : 419-740-6600 E-mail address : www.calibrescientific.com Emergency telephone : CHEMTREC USA & Canada 1-800-424-9300 Recommended use of the chemical and restrictions on use Recommended use : Laboratory chemicals SECTION 2. HAZARDS IDENTIFICATION GHS Classification Acute toxicity (Oral) : Category 4 Acute toxicity (Inhalation) : Category 3 Skin irritation : Category 2 Eye irritation : Category 2A Germ cell mutagenicity : Category 1B Carcinogenicity : Category 1A Reproductive toxicity : Category 1B Specific target organ systemic toxicity : Category 3 (Respiratory system) - single exposure 1 / 20 SAFETY DATA SHEET NeXtal AmSO4 Suite Version 2.0 Revision Date 03/31/2020 Print Date 03/31/2020 Specific target organ Category 1 systemic toxicity - repeated exposure Acute aquatic toxicity : Category 1 Chronic aquatic toxicity : Category 1 GHS Label element Hazard pictograms : Signal Word : Danger Hazard Statements : H302 Harmful if swallowed. H315 Causes skin irritation. H319 Causes serious eye irritation. H331 Toxic if inhaled. H335 May cause respiratory irritation. H340 May cause genetic defects. H350 May cause cancer. H360 May damage fertility or the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. Precautionary Statements : Prevention: P201 Obtain special instructions before use. P260 Do not breathe dust/fumes/gas/mist/vapors/spray. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. Response: P308 + P313 IF exposed or concerned: Get medical advice/ attention.
    [Show full text]
  • 4. Other Data Relevant to an Evaluation of Carcinogenicity and Its Mechanisms
    4. Other Data Relevant to an Evaluation of Carcinogenicity and its Mechanisms 4.1 Absorption, distribution, metabolism and excretion of radionuclides The most important routes of intake of radionuclides are by inhalation and ingestion, for both workers and members of the public. Ingestion is a less important route for workers, but a proportion of inhaled material is escalated from the trachea and lungs and swallowed. Entry through contaminated wounds may also occur in certain industrial situations. Entry through intact skin is rare, although exposure to 3 H2O vapour can lead to appreciable doses by this route. Entry of radionuclides into the body by inhalation and ingestion leads to irradiation of the respiratory and gastrointestinal tracts. Entry through contaminated wounds also results in local irradiation of tissues. After intake by any route, the subsequent behaviour of the radionuclide depends on the element concerned and its chemical form during exposure. These factors determine its solubility and the extent to which it is dissolved and absorbed into the blood. On reaching the blood, the distri- bution to and retention in body tissues depend on the chemical nature of the element. If a radionuclide that enters the bloodstream is an isotope of an element that is normally present (e.g. sodium, potassium, chlorine), it will behave like the stable element. If it has similar chemical properties to an element normally present, it will tend to follow the metabolic pathways of that element (e.g. 90Sr and 226Ra behave similarly to calcium and 137Cs and 86Rb similarly to potassium), although the rate of transfer between the various compartments in the body may be different.
    [Show full text]
  • SPECIATE Version 5.1 Database Development Documentation
    Addendum SPECIATE Version 5.1 Database Development Documentation June 2020 EPA/600/R-20/189 EPA SPECIATE Workgroup US Environmental Protection Agency Abt Associates EPA Contract No. EP-BPA-17H-0012 The views expressed in this document are those of the authors and do not necessarily represent the views or policies of the U.S. EPA. This document has gone through review process within the Agency and is cleared for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. Abt Associates Report Title Insert Date ▌1 EXECUTIVE SUMMARY Executive Summary EPA is releasing an updated version of the SPECIATE database, SPECIATE 5.1, about a year after the release of SPECIATE 5.0. In lieu of full documentation, this document provides highlights of the revisions to SPECIATE 5.0. Full documentation of the SPECIATE program can be found in the SPECIATE documentation section of EPA’s air emissions modeling website. SPECIATE is the U.S. Environmental Protection Agency’s (EPA) repository of speciation profiles of air pollution sources that provide the species makeup or composition of organic gas, particulate matter (PM) and other pollutants emitted from these sources. Some of the many uses of these source profiles include: (1) creating speciated emissions inventories for regional haze, PM, greenhouse gas (GHG), and photochemical air quality modeling; (2) adding PM species in the EPA’s National Emissions Inventory (NEI); (3) developing black carbon assessments and particulate carbonaceous inventories; (4) estimating air toxic pollutant emissions from PM and organic gas primary emissions; (5) providing input to chemical mass balance (CMB) receptor models; and, (6) verifying profiles derived from ambient measurements by multivariate receptor models (e.g., factor analysis and positive matrix factorization).
    [Show full text]
  • Calcium Chloride
    United States Department of Agriculture Agricultural Marketing Service | National Organic Program Document Cover Sheet https://www.ams.usda.gov/rules-regulations/organic/national-list/petitioned Document Type: ☐ National List Petition or Petition Update A petition is a request to amend the USDA National Organic Program’s National List of Allowed and Prohibited Substances (National List). Any person may submit a petition to have a substance evaluated by the National Organic Standards Board (7 CFR 205.607(a)). Guidelines for submitting a petition are available in the NOP Handbook as NOP 3011, National List Petition Guidelines. Petitions are posted for the public on the NOP website for Petitioned Substances. ☒ Technical Report A technical report is developed in response to a petition to amend the National List. Reports are also developed to assist in the review of substances that are already on the National List. Technical reports are completed by third-party contractors and are available to the public on the NOP website for Petitioned Substances. Contractor names and dates completed are available in the report. Ammonium Citrate Crops 1 2 Identification of Petitioned Substance 3 4 Chemical Names: 19 Trade Names: 5 Ammonium Citrate 20 N/A 6 Citric Acid Triammonium Salt 21 7 Ammonium Citrate Tribasic CAS Numbers: 8 Ammonium Citrate Dibasic 3458-72-8 9 Ammonium Citrate Monobasic 3012-65-5 10 Citric Acid Triamine 7632-50-0 11 1,2,3-Propanetricarboxylic acid, 2-hydroxy-, 12 ammonium salt Other Codes: 13 Ammonium Hydrogencitrate EC No. 222-394-5 14 EC No. 221-146-3 15 Other Name: EC No.
    [Show full text]
  • (12) Patent Application Publication (10) Pub. No.: US 2008/0166281 A1 Harms Et Al
    US 2008O166281A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2008/0166281 A1 Harms et al. (43) Pub. Date: Jul. 10, 2008 (54) METHODS FOR PRODUCING CESIUM (30) Foreign Application Priority Data HYDROXDE SOLUTIONS Jan. 27, 2005 (DE) ......................... 102005OO3999.5 (76) Inventors: Gerd J. Harms, Goslar (DE); O O Alexander Schiedt, Hahausen Publication Classification (DE); Manfred Bick, Oberursel (51) Int. Cl. (DE); Wolfgang Hildebrandt, BOID LL/00 (2006.01) Langelsheim (DE) (52) U.S. Cl. ........................................................ 423/202 Correspondence Address: (57) ABSTRACT FULBRIGHT & JAWORSKI, LLP 666 FIFTHAVE Methods for producing cesium hydroxide Solutions during NEW YORK, NY 10103-3198 which: cesium-containing ore is disintegrated with Sulfuric acid while forming a cesium aluminum Sulfate hydrate, which (21) Appl. No.: 11/795,855 is poorly soluble at low temperatures; the formed cesium alum is separated away in the form of a solution from the Solid (22) PCT Filed: Jan. 25, 2006 ore residues; the aluminum is precipitated out of the cesium alum solution while forming a cesium sulfate Solution; the (86). PCT No.: PCT/EP2006/OOO634 formed cesium sulfate solution is reacted with barium hydroxide or stontium hydroxide while forming a cesium S371 (c)(1), hydroxide solution, and; the formed cesium hydroxide solu (2), (4) Date: Nov. 1, 2007 tion is concentrated and purified. US 2008/0166281 A1 Jul. 10, 2008 METHODS FOR PRODUCING CESIUM contents of Sulfate and/or barium or has a caesium carbonate HYDROXDE SOLUTIONS Solution as the end product. This process does not give cae sium hydroxide solutions. 0007 Caesium hydroxide solutions have numerous appli 0001.
    [Show full text]
  • 技 術 報 告 Technical Report
    技 術 報 告 Technical Report Jpn. J. Hosp. Pharm. 技 術 報 告 〔19(1)99-105(1993) 〕 Simultaneous Determination of Inorganic Cations in Cardioplegic Solution by Photometric Ion Chromatography ― A. Comparison with Autoanalyzer Method NOBUMASA HAYASE*† 1, SHIGETAKA AKUTSU† 1, SHUN- ICHIINAGAKI† 1, and HIROMICHI HOSOKAWA† 2 Departmemt of Hospital Pharmacy† 1 and Clinical Laboratories† 2, Asahikawa Medical College Hospital Received June 20, 1992 (Accepted September 30, 1992 ) A simultaneous determination of four inorganic cations in cardioplegic solution was examined by in- direct photometric ion chromatography (PIC). Cardioplegic solution was diluted 100-fold with 2.5mM copper sulfate aqueous solution, treated with SEP-PEK C18and ACCELL PLUS QMA cartridges, and then injected into the chromatograph. Large amounts of sodium, potassium and magnesium and small amount of calcium were separated on a Zorbax SCX-300 column with 2.5mM copper sulfate solution as an eluent, and detected as negative absorption peaks by an ultraviolet (UV) photometric detector at 230 nm. Straight calibration curves for the cations were obtained from 0.05 to 1.5mM by using a peak height ratio method. The reproducibility of the data was good enough. When cardioplegic solution was diluted 4- fold with the eluent, the determination of calcium in sample solutions was sufficiently good, in spite of over-loadings of the other cations on column. The results obtained by the PIC method were more accurate than those of the autoanalyzer method. Keywords- cardioplegic solution; inorganic cations; photometric ion chromatography; simultaneous determination; autoanalyzer Introduction Cardioplegic solution has been developed for clinical use of myocardial protection during aortic cross- clamping in the field of cardiac surgery 1).
    [Show full text]