Electromechanical Rod Actuators DNCE Lead Screw or Ball Screw Driven

Motor and mounting attachments ordered separately

Reliable, Modular Solution for Intelligent Control

The DNCE electromechanical rod Modularity, Ease of Use Application Driven Mechanism actuator is a screw driven linear • The DNCE can be supplied with The type of application actuator with a nonrotating round an MTR-DCI intelligent motor determines which is the best piston rod. For conversions to unit, a MTR-AC servo motor, a drive mechanism: electromechanical automation, MTR-ST stepper motor, or • Lead screw for format setting the DNCE profile is compatible adapted to third-party motors on printing machines, with Festo DNC and other • Suitable motor mounting kits – packaging machines, and in pneumatic cylinders based on for axial (A) as well as for feed systems ISO standard 6431. DNCE accepts reverse parallel (U) motor • Ball screw for dynamic intelligent position controls, configuration push-pull applications such as allowing for increased flexibility • The limit switches for volumetric filling, CD stacking, and efficiency in the production integrated sensing fit flush in and part insertion process. the profile slot, providing protection without the need for Compatible Accessories protruding attachments All mounting attachments, guide • Readily available mounting units and piston rod accessories attachments make it easy to are compatible with pneumatic install DNC cylinders, which means no • Lubricated for life for need for costly in-house maintenance-free operation adaptations. DNCE.PSI.US

For more information: www.festo.com/us/dnce Product Short Information Electromechanical Rod Actuators DNCE Lead Screw or Ball Screw Driven

Technical Data

Lead Screw Driven Ball Screw Driven Frame Sizes 32 40 63 32 40 63 Standard strokes* [mm] 100 100 100 100 100 100 200 200 200 200 200 200 300 300 300 300 300 300 400 400 400 400 400 400 600 600 600 600 800 800 Metric screw leads [mm] 1.5 2.5 4 3 5 10 10 12.7 20 Inch screw leads [in] 0.5 Repeatability [mm] ±0.07 ±0.02 Max. acceleration [m/s2]1 6 Max. speed [m/s] 0.06 0.07 0.07 0.5 0.635 1 Max. feed force [N] 300 600 1,000 350 800 2,500 * X strokes on request

STROKE LENGTH Dimensions

STROKE LENGTH

AM B B1 B2 BG D1 D2 D3 D4 E G G1 KK ØØØØ [mm] d11 h9 h6 f7 32 22 30 19 32 16 16 6 32 M3 45.5 24 26 M10x1.25 40 24 35 20 42 16 20 8 40 M4 54 28.5 30 M12x1.25 63 32 45 31 62 17 28 12 60 M5 75.5 34 36 M16x1.5

L1 L2 L3 L4 MM RT TG VA VD WH ZJ 1 3 [mm] ±1 32 18 122 15.9 8 12 M6 32.5 7 10 26 148 10 6 40 21.5 146.5 18.4 14 16 M6 38 7 10.5 30 176.5 13 6 63 28.5 177 23.5 17 20 M8 56.5 9 15 37 214 17 8

Accessories

All mounting attachments for the pneumatic DNC cylinders can be used on the DNCE. Festo Corporation

For ordering assistance, or to find your nearest Festo Distributor, Call: 1.800.99.FESTO Fax: 1.800.96.FESTO Email: [email protected] Visit: www.festo.com/us

For technical support, Call: 1.866.GO.FESTO Fax: 1.800.96.FESTO Email: [email protected]

Subject to change DNCE.PSI.US - 11.07