LTE Advanced Pro: Towards the 5G Mobile Network Frédéric Launay, André Perez

Total Page：16

File Type：pdf, Size：1020Kb

LTE Advanced Pro: Towards the 5G Mobile Network Frédéric Launay, André Perez

To purchase this product, please visit https://www.wiley.com/en-dk/9781786304308 LTE Advanced Pro: Towards the 5G Mobile Network Frédéric Launay, André Perez E-Book 978-1-119-62968-9 June 2019 €126.99 Hardcover 978-1-786-30430-8 June 2019 €141.10 O-Book 978-1-119-62965-8 May 2019 Available on Wiley Online Library DESCRIPTION This book presents LTE evolution towards 5G mobile communication and the emergence of new requirements for MBB, MTC and LLC services. As LTE technologies evolve, LTE Advanced Pro dramatically increases cell capacity and user data rates for the MBB unicast service. Such requirements are obtained using full-dimension MIMO, carrier aggregation (on either licensed or unlicensed frequency bands) and dual connectivity. To improve the efficiency of same-content delivery to multiple users, 3GPP proposes a group communications service over LTE and defines mission critical push-to-talk (MCPTT) for dedicated public safety services. Complementary low-cost and low-power modems with enhanced coverage and massive connectivity are emerging. Thus, this book also discusses the need for LTE to support low-rate transmission and high-latency communication for MTC services. ABOUT THE AUTHOR Frédéric Launay is Associate Professor at LIAS laboratory and a lecturer in networks and telecommunications at the University of Poitiers, France. He leads training on the 4G, 5G, SIP and IMS networks. André Perez is a consultant as well as a teacher in networks and telecommunications. He works with telecom companies regarding architecture studies and leads training on the 4G and 5G networks for NEXCOM Systems. To purchase this product, please visit https://www.wiley.com/en-dk/9781786304308.

Copy Link

Recommended publications

NEXT GENERATION MOBILE WIRELESS NETWORKS: 5G CELLULAR INFRASTRUCTURE JULY-SEPT 2020 the Journal of Technology, Management, and Applied Engineering
VOLUME 36, NUMBER 3 July-September 2020 Article Page 2 References Page 17 Next Generation Mobile Wireless Networks: Authors Dr. Rendong Bai 5G Cellular Infrastructure Associate Professor Dept. of Applied Engineering & Technology Eastern Kentucky University Dr. Vigs Chandra Professor and Coordinator Cyber Systems Technology Programs Dept. of Applied Engineering & Technology Eastern Kentucky University Dr. Ray Richardson Professor Dept. of Applied Engineering & Technology Eastern Kentucky University Dr. Peter Ping Liu Professor and Interim Chair School of Technology Eastern Illinois University Keywords: The Journal of Technology, Management, and Applied Engineering© is an official Mobile Networks; 5G Wireless; Internet of Things; publication of the Association of Technology, Management, and Applied Millimeter Waves; Beamforming; Small Cells; Wi-Fi 6 Engineering, Copyright 2020 ATMAE 701 Exposition Place Suite 206 SUBMITTED FOR PEER – REFEREED Raleigh, NC 27615 www. atmae.org JULY-SEPT 2020 The Journal of Technology, Management, and Applied Engineering Next Generation Mobile Wireless Networks: Dr. Rendong Bai is an Associate 5G Cellular Infrastructure Professor in the Department of Applied Engineering and Technology at Eastern Kentucky University. From 2008 to 2018, ABSTRACT he served as an Assistant/ The requirement for wireless network speed and capacity is growing dramatically. A significant amount Associate Professor at Eastern of data will be mobile and transmitted among phones and Internet of things (IoT) devices. The current Illinois University. He received 4G wireless technology provides reasonably high data rates and video streaming capabilities. However, his B.S. degree in aircraft the incremental improvements on current 4G networks will not satisfy the ever-growing demands of manufacturing engineering users and applications.
[Show full text]
4G to 5G Networks and Standard Releases
4G to 5G networks and standard releases CoE Training on Traffic engineering and advanced wireless network planning Sami TABBANE 30 September -03 October 2019 Bangkok, Thailand 1 Objectives Provide an overview of various technologies and standards of 4G and future 5G 2 Agenda I. 4G and LTE networks II. LTE Release 10 to 14 III. 5G 3 Agenda I. 4G and LTE networks 4 LTE/SAE 1. 4G motivations 5 Introduction . Geneva, 18 January 2012 – Specifications for next-generation mobile technologies – IMT-Advanced – agreed at the ITU Radiocommunications Assembly in Geneva. ITU determined that "LTELTELTE----AdvancedAdvancedAdvanced" and "WirelessMANWirelessMANWirelessMAN----AdvancedAdvancedAdvanced" should be accorded the official designation of IMTIMT----AdvancedAdvanced : . Wireless MANMAN- ---AdvancedAdvancedAdvanced:::: Mobile WiMax 2, or IEEE 802. 16m; . 3GPPLTE AdvancedAdvanced: LTE Release 10, supporting both paired Frequency Division Duplex (FDD) and unpaired Time Division Duplex (TDD) spectrum. 6 Needs for IMT-Advanced systems Need for higher data rates and greater spectral efficiency Need for a Packet Switched only optimized system Use of licensed frequencies to guarantee quality of services Always-on experience (reduce control plane latency significantly and reduce round trip delay) Need for cheaper infrastructure Simplify architecture of all network elements 7 Impact and requirements on LTE characteristics Architecture (flat) Frequencies (flexibility) Bitrates (higher) Latencies (lower) Cooperation with other technologies (all 3GPP and
[Show full text]
4G LTE Standards
Standard of 4G LTE Jia SHEN CAICT 1 Course Objectives: Evolution of LTE-Advanced LTE-Advanced pro 2 2 Evolution of LTE/LTE-A technology standard Peak rate LTE-Advanced 3Gbps R10 R11 R12 LTE • Distributed • D2D R9 antenna • TDD Flexible 300Mbps R8 • dual layer CoMP slot beamformi • Enhanced allocation ng • CA MIMO • 3D MIMO • Terminal • Enhanced • OFDM • Enhanced CA • … location MIMO • MIMO • … technology • Relay • … • HetNet 2008 2009 • … 2011 2012 2014 Terminal location technology dual layer3 beamforming CA Enhanced antenna Relay Course Objectives: Evolution of LTE-Advanced CA Enhanced MIMO CoMP eICIC Relay LTE-Advanced pro 4 4 Principle of carrier aggregation （CA） Carrier aggregation • In order to satisfy the design of LTE-A system with the maximum bandwidth of 100MHz, and to maintain the backward compatibility，3GPP proposed carrier aggregation. In the LTE-A system, the maximum bandwidth of a single carrier is 20MHz Participate in the aggregati on of the various LTE carrier is known as the LTE-A mem ber carrier (Component Car rier, CC) Standard Considering the backward compatibility of LTE system, the maximum bandwidth of a single carrier unit is 20M Hz in the LTE-A system. All carrier units will be designed to be compatible with LTE, but at this stage it does not exclude the considerati on of non - backward compatible carriers. In the LTE-A FDD system, the terminal can be configured to aggregate different bandwidth, different number o f carriers. For TDD LTE-A systems, the number of uplink and downlink carriers is the same in a typical scence. In the LTE-A system, CA supports up to 5 DL carriers.
[Show full text]
LTE Evolution: Standardization & Deployment the Long Run to 5G
Telit IoT Connectivity LTE Evolution: Standardization & Deployment The Long Run to 5G By: Mauro Lodolo | Program Manager Mobile Broadband Contents Introduction 3 LTE Standardization 5 LTE 6 LTE-Advanced 6 LTE-Advanced-Pro 7 5G 9 Key Technologies in Depth 11 LTE Carrier Aggregation in Unlicensed Spectrum 11 Use Case: Fixed-LTE CPE 13 Use Case: Small Cells 14 Antenna Techniques, MIMO 15 Higher-Order Modulations Schemes 17 Telit Portfolio 17 Conclusions 19 References 21 2 Introduction In the continuous and fast changing landscape of mobile telecommunications, the 3GPP (3rd Generation Partnership Project) Release 15 has just kicked off officially triggering officially the new era of fifth Generation of Telecommunication: 5G. Legacy technologies are still deployed and the market. Among them, incotrovertibly, LTE (Long Term Evolution) has been playing a key role in the adoption of 4G (fourth Generation) since it was commercially launched in early 2010. In a matter of a few years, LTE has been successfully deployed around the world driving the entire wireless ecosystem to connect over 1 in 4 mobile users worldwide, a trend that is continuing to grow tremendously [1]. Many Mobile Network Operators (MNO) have heavily invested in the LTE network rollouts across the world for the transition from the 2G/3G (second/third Generation) to 4G. This deployment has been an instrumental step to enhance the Mobile Broadband (MBB) proposition and improved coverage, as well as for offering more attractively priced data tariffs, greater availability and affordability of higher speed devices. The generational shift that is gaining momentum on the wave of the continuous enhancements and new features that the standard introduces has made LTE the fastest developing mobile technology ever.
[Show full text]
5G Wireless Infrastructure Semiconductor Analysis
5G WIRELESS INFRASTRUCTURE SEMICONDUCTOR ANALYSIS SIA CONFIDENTIAL | 5G INFRASTRUCTURE ANALYSIS | 1 2 | 5G INFRASTRUCTURE ANALYSIS EXECUTIVE SUMMARY On behalf of SIA, a wireless market intelligence firm has analyzed all of the semiconductor function product families within the key elements of a 5G radio access network (RAN)- baseband unit (BBU) and active antenna unit (AAU)/remote radio unit (RRU) systems for 5G base stations along with the current domestic United States and foreign/international semiconductor suppliers. Our conclusion is that despite the United States maintaining overall market-share leadership in semiconductors with a 45% share of the global market, substitutes for U.S. components exist for nearly every semiconductor product family required to build a complete RAN infrastructure. In fact, our analysis indicates that of the more than fifty critical semiconductor elements necessary to design, manufacture, and sell a competitive 5G RAN network1, only 3 components could face supply constraints outside the United States in the event of an export restriction. For each of those three components, we have further concluded that alternatives are currently being deployed or under active development, especially within China by Huawei’s semiconductor design arm, HiSilicon. 8 | 5G INFRASTRUCTURE ANALYSIS | SIA CONFIDENTIAL OUR CONCLUSION FOR THE BASEBAND UNIT SYSTEM FOR A 5G BASE STATION IS THAT THE TWO KEY SEMICONDUCTOR PRODUCT FAMILIES THAT MAY PRESENT SUPPLY ISSUES OUTSIDE OF THE UNITED STATES ARE: • Commercial off-the-shelf Field
[Show full text]
What Frequency Is 5G (Verizon)
11/18/2019 What frequency is 5G? | About Verizon eless.com/) Residential (https://www.verizon.com/?lid=//global//residential) m/business/gateway/) About Verizon (/about/) Your Contact us Our Company location: (https://www.verizon.com/Support/Residential/contact- (/about/our-company) Concord, us/index.htm) NH News (/about/news) Change location 11.18.2019 Personal Tech (/about/news-story-categories/personal-tech) What frequency is 5G? (https://w(whtwtp.f:a//cwewb(howto.ttkpw.:c/i/totwemwr/.cswoh.lmainr/keserh/dsaihrnea.c?roemr.p/hshpa?reArticle? u=https://uvrzl=.thot/t3p7si:8m//DivnOzi.=toot)r/u3e7&i8uDrlO=hot&tpvsia:/=/vez.rtioz/o3n7&i8teDxOt=oW&htiatlte%=W20hfaret%qu2e0nfcreyq%u2e0nicsy%%22005iGs%%230F5% From 1G to 5G all cellular networks carry information through the electromagnetic spectrum which includes the radio spectrum https://www.verizon.com/about/our-company/5g/what-frequency-5g?fbclid=IwAR2RIHs8cmcE_pskp6pSYZuXDEVnzq_hmb12fkY_wPSNpD-Q5OUk4f… 1/5 11/18/2019 What frequency is 5G? | About Verizon From 1G to 5G, all cellular networks carry information through the electromagnetic spectrum, which includes the radio spectrum. Some frequency bands within the radio spectrum will be used for 5G, including Verizon’s 5G Ultra Wideband (UWB) network. The following information can help you learn what frequency 5G uses and how that affects the speed and efficiency of the network. What is the radio spectrum? To understand exactly how fast 5G technology is expected to be, it’s important to consider it in relation to other cellular network technologies. If you think back to high school physics, you may recall the electromagnetic spectrum. This includes all the different wavelengths/frequencies you may encounter: Gamma Rays, X-Rays, light and visible rays, microwaves, millimeter waves (mmWave), radio waves (including AM and FM radio) and more.
[Show full text]
Overview of Risks Introduced by 5G Adoption in the United States
CRITICAL INFRASTRUCTURE SECURITY AND RESILIENCE NOTE July 31, 2019; 1200 EDT OVERVIEW OF RISKS INTRODUCED BY 5G ADOPTION IN THE UNITED STATES KEY FINDINGS The Department of Homeland Security (DHS)/Cybersecurity and Infrastructure Security Agency (CISA) assesses that Fifth Generation Mobile Network (5G) will present opportunities and challenges, and its implementation will introduce vulnerabilities related to supply chains, deployment, network security, and the loss of competition and trusted options. Use of 5G components manufactured by untrusted companies could expose U.S. entities to risks introduced by malicious software and hardware, counterfeit components, and component flaws caused by poor manufacturing processes and maintenance procedures. 5G hardware, software, and services provided by untrusted entities could increase the risk of compromise to the confidentiality, integrity, and availability of network assets. Even if U.S. networks are secure, U.S. data that travels overseas through untrusted telecommunication networksi is potentially at risk of interception, manipulation, disruption, and destruction. 5G will use more components than previous generations of wireless networks, and the proliferation of 5G infrastructure may provide malicious actors more attack vectors. The effectiveness of 5G’s security enhancements will in part depend on proper implementation and configuration. Despite security enhancement over previous generations, it is unknown what new vulnerabilities may be discovered in 5G networks. Further, 5G builds upon previous generations of wireless networks and will initially be integrated into 4G Long-Term Evolution (LTE) networks that contain some legacy vulnerabilities. Untrusted companies may be less likely to participate in interoperability efforts. Custom 5G technologies that do not meet interoperability standards may be difficult to update, repair, and replace.
[Show full text]
LTE Standards Evolution Towards an All Business Connected Primary Infrastructure
LTE Standards Evolution towards an All Business Connected Primary Infrastructure February 2018 Contents Executive Summary List of Commonly Used Abbreviations 1. LTE, LTE-Advanced, LTE-Advanced Pro, and All Business Connected LTE 2. Capability for ubiquitous experience: always available, always satisfying 2.1 Short TTI ------------------------------------------------------------------------------------------08 2.2 Mobility enhancement and Control Plane (CP) latency reduction ----------------------------------09 2.3 Coverage enhancement ---------------------------------------------------------------------------11 2.4 MIMO ---------------------------------------------------------------------------------------------11 2.5 Wireless to the X (home/enterprise/camera, etc.) -------------------------------------------------13 2.6 Video/voice ---------------------------------------------------------------------------------------14 2.7 Enhanced CA utilization ---------------------------------------------------------------------------15 2.8 High speed enhancement -------------------------------------------------------------------------15 3. Capability for all business connection: boosting vertical markets 3.1 Cellular IoT ----------------------------------------------------------------------------------------17 3.2 URLLC --------------------------------------------------------------------------------------------19 3.3 V2X -----------------------------------------------------------------------------------------------20 3.4 Unmanned Aerial Vehicle --------------------------------------------------------------------------20
[Show full text]
These Phones Will Still Work on Our Network After We Phase out 3G in February 2022
Devices in this list are tested and approved for the AT&T network Use the exact models in this list to see if your device is supported See next page to determine how to find your device’s model number There are many versions of the same phone, and each version has its own model number even when the marketing name is the same. ➢EXAMPLE: ▪ Galaxy S20 models G981U and G981U1 will work on the AT&T network HOW TO ▪ Galaxy S20 models G981F, G981N and G981O will NOT work USE THIS LIST Software Update: If you have one of the devices needing a software upgrade (noted by a * and listed on the final page) check to make sure you have the latest device software. Update your phone or device software eSupport Article Last updated: Sept 3, 2021 How to determine your phone’s model Some manufacturers make it simple by putting the phone model on the outside of your phone, typically on the back. If your phone is not labeled, you can follow these instructions. For iPhones® For Androids® Other phones 1. Go to Settings. 1. Go to Settings. You may have to go into the System 1. Go to Settings. 2. Tap General. menu next. 2. Tap About Phone to view 3. Tap About to view the model name and number. 2. Tap About Phone or About Device to view the model the model name and name and number. number. OR 1. Remove the back cover. 2. Remove the battery. 3. Look for the model number on the inside of the phone, usually on a white label.
[Show full text]
1G, 2G, 3G, 4G, 5G
1G, 2G, 3G, 4G, 5G By: Simon Johansen G? • G Generation • Generation of wireless phone technology 1G • Frequency: 150MHz / • From 1980 to 1990 900MHz • Bad voice quality • Bandwidth: Analog • Poor battery, cellphones telecommunication • Big cellphones (30KHz) • Characteristic: First • Better than nothing, at wireless communication least its wireless and • Technology: Analog mobile cellular • Capacity (data rate): 2kbps 2G • Frequency: 1.8GHz • From 1991 to 2000 (900MHz), digital • Allows txt msg service telecommunication • Signal must be strong or • Bandwidth: 900MHz else weak digital signal (25MHz) • Characteristic: Digital • 2.5G • Technology: Digital – 2G cellular technology with cellular, GSM GPRS • Capacity (data rate): – E-Mails 64kbps – Web browsing – Camera phones • Why better than 1G? 3G • Frequency: 1.6 – 2.0 • From 2000 to 2010 GHz • Called smartphones • Bandwidth: 100MHz • Video calls • Characteristic: Digital • Fast communication broadband, increased • Mobil TV speed • 3G phones rather • Technology: CDMA, expensive UMTS, EDGE • Capacity (data rate): 144kbps – 2Mbps • Why better than 2G? 4G • Frequency: 2 – 8 GHz • From 2010 to today (2020?) • Bandwidth: 100MHz • MAGIC • Characteristic: High – Mobile multimedia speed, all IP – Anytime, anywhere • Technology: LTE, WiFi – Global mobile support • Capacity (data rate): – Integrated wireless 100Mbps – 1Gbps solutions – Customized personal service • Why better than 3G? • Good QoS + high security • Bigger battery usage 5G • https://5g.co.uk/guides • From X (2020?) to Y /5g-frequencies-in-the-
[Show full text]
6G Fundamentals: Vision & Enabling Technologies
6G Fundamentals: Vision & Enabling Technologies Towards Trustworthy Solutions & Resilient Systems Author: David Soldani Published by 6GWorld, 15 June 2021 Link:https://www.6gworld.com/latest-research/6g-fundamentals-vision-and-enabling-technologies/ Reference number: 6GW02 Page | 1 6G Gains Momentum While the next generation of mobile connectivity still lies roughly a decade ahead, the number of 6G initiatives ongoing globally, and corresponding investments provide an intriguing prospect for the future. Public and private sectors have already started investing in research and innovation (R&I) actions to tackle requirements that 6G will probably demand when it reaches commercial reality around 2030 (Castro, 2021, 5G Americas, 2021b). These include use cases promised in 5G networks but not yet realised, and more advanced scenarios that are emerging in the context of next generation/6G networks such as Terahertz frequencies, holoportation, tactile/haptic communications, ubiquitous services (land, air, space, sea), medical/health services, government/national security, imaging and sensing, first responder/emergency services, cyber-physical systems/manufacturing, and transportation services. Some examples of relevant use cases and corresponding technology requirements are shown in Figure 1 (5G Americas, 2021b). For more information and other usage scenarios towards 6G, the reader may refer to, e.g., (6G Flagship, 2021a, 6GIC Vision, 2021). Specific international efforts by leading nations in the wireless cellular industry and relevant Beyond 5G (B5G) and 6G initiatives and related investments are illustrated in Figure 2. In Europe, within the EU Horizon 2020 R&I framework programme, three recent joint projects focused on 6G development have been announced: Hexa-X, RISE-6G, and NEW-6G.
[Show full text]
Cradlepoint MC400 Modular | Comms-Express
MC400 Modular Modem Shown: MC400-1200M-B ©Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com SPEC SHEET ■ MC400 Supported Products: MC400-1200M-B LTE Advanced Pro/HSPA+ — AER2200 — COR IBR900 Series with COR — ARC CBA850 Extensibility Dock — AER1600 Series — COR IBR600B/C Series with COR — COR IBR1700 Extensibility Dock MC400-1200M-B LTE Advanced Pro/HSPA+ — Technology: Category 18 LTE Advanced Pro, DC-HSPA+ with SIM-based auto-carrier selection — The MC400-1200M is FirstNet Ready™ — Downlink Rates: LTE 1.2 Gbps, DC-HSPA+ 42.2 Mbps* — Uplink Rates: LTE 150 Mbps, DC-HSPA+ 5.76 Mbps* — MIMO: 2x2 or 4x4 MIMO — 256 QAM support — Frequency Bands: — LTE Bands — LTE FDD: 1, 2(25), 3, 4(66), 5(26/18/19), 7, 8, 12(17), 13, 14, 20, 28, 29, 30, 32, 71 — LTE TDD: 38, 39, 40, 41, 43, 46,48 — 1200M-B Antenna Mapping: — Main/Aux 0: 1, 2(25), 3, 4(66), 5(26/18/19), 7, 8, 12(17), 13, 14, 20, 28, 29, 39, 71, [41] for 4x4 MIMO — Main/Aux 1: 7, 30, 32, 38, 40, 41, 42, 43, 13, 46, 48, [2(25)] for 4x4 MIMO, [4(66)] for 4x4 MIMO — If Main/Aux 1 is not connected, these bands are not supported: 7, 30, 32,38, 40, 41, 42, 43, 46, 48 — Carrier Aggregation: Up to 5CA. [ ] indicates 4x4 MIMO — AT&T: — LTE FDD: 2, 4, 5, 7, 12, 13, 14, 17, 25, 26, 29 (DL), 30, 66, 71 (FDD) — LTE TDD: 41, 46 (DL), 48 — 3G DC-HSPA+:1, 2, 4, 5, 8 — 2CA DL carrier aggregation combinations: CA_[2A]-[4A], CA_[2A]-5A, CA_2A-7A, CA_[2A]-12A, CA_[2A]-14A, CA_[2A]-29A, CA_2A-30A, CA_[2A]-46A, CA_[2A]- 48A, CA_[2A]-[66A], CA_[2A]-71A, CA_[4A]-5A, CA_4A-7A, CA_[4A]-12A, CA_[4A]-29A,
[Show full text]