DOCSLIB.ORG

2012 About Us

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2012 About Us 2012 About Us Think Clean. www.cleanlogix.com 1 | Page Contents... Section Page It’s About You (and Your Business) 2 Think Clean 3 Value Proposition 4 Proven Hands-on Experience 5 Meeting the Challenge 7 Inventing the Future 8 Intellectual Property 9 Business-to-Business Communication 11 Networking with Industry 13 Partnering for Success 14 Stewardship 15 Biography of the Chief CO2 Guy 16 2 | Page It’s About You (and Your Business)... CleanLogix works with you to specify, build, validate and implement state-of-the-art lean and green (aka “clean”) manufacturing technology (CleanTech). Our business is about reducing your manufacturing waste (i.e., lowering production costs) using best available CleanTech. Our core competency uniquely focuses on the use of natural, recycled carbon dioxide (CO2) as a green manufacturing agent. Our customers have realized huge cost savings using our innovative CO2 CleanTech and expert implementation services. CleanLogix is a product of more than 25 years of experience developing and implementing innovative and effective clean manufacturing technology for both large and small businesses. We have a lot of bright ideas; tools, technology, training, expertise and experience to help sustain your business. Our products and services improve your bottom line. We deliver real, measurable value in the form of improved manufacturing productivity and product quality. Our products and services lower energy consumption, eliminate water usage and wastewater production, resolve air pollution and nuisance odor issues, shrink material and labor inputs and reduce many other forms of manufacturing waste. We implement effective lean and green manufacturing methods and processes, and develop clean-enabled assembly tools that produce products at lower cost and with less environmental pollution. We also help you develop unique manufacturing strategies which serve as intellectual property that strengthens your competitive position. We appreciate your interest in CleanLogix (and our selling partners too) and thank you for this opportunity to present our unique company and value proposition. We invite your careful review and look forward to developing a lasting and profitable relationship. For additional information about our company please contact me by e- mail at [email protected]. Sincerely, David Jackson Chief CO2 Guy 3 | Page Think Clean... As our company name and “The CO2 Guy” icon imply, thinking clean is about bright and logical ideas for eliminating manufacturing waste. Manufacturing waste is generally thought of as any resource used in a production process that does not go out as part of the product and costs you money to get rid of it. However, manufacturing waste also exists in many other forms, for example excessive factory space utilization for equipment (production and waste treatment equipment), inefficient material and process flows, inefficient use of facility labor and lost productivity of both labor and equipment. These examples of waste significantly impact profitability too, but are often obscured in overhead accounts or generally overlooked in the manufacturing operation. The bottom line is that manufacturing waste stealthily steals from your hard- earned operating margin. In an era of complex business challenges; intense global competitiveness, burdensome environmental regulation and resource constraints, your company needs both lean and green (clean) manufacturing technology (CleanTech) to eliminate multifaceted manufacturing wastes in your production operations. If you manufacture high-tech or high-reliable products, you need state-of-the-art CleanTech and implementation expertise for successful development and execution of manufacturing waste reduction programs. To assist you in this endeavor, our bright ideas are grounded in the following fundamental concepts: • CleanTech eliminates or reduces composite forms of manufacturing waste: time, labor, space, transport, defect, inventory, processing, equipment, raw materials, air pollution, water pollution, wastewater, solid wastes, and energy wastes. • CleanTech improves quality and reliability requirements imposed by advanced materials, manufacturing methods and processes, and applications. • CleanTech such as flexible automation, modular and clustered assembly operations (cells) eliminate repetitive operational task errors and reduce skilled labor wastes. • CleanTech such as more adaptable and flexible production tools and methodologies improve efficiency and productivity in low volume-high mix-high value production operations. 4 | Page Value Proposition… Our Mission We improve your business profitability through the integration or infusion of clean manufacturing ideas; tools, technology, training, expertise, and experience into your manufacturing operations. Our Program We work with your engineers to specify, build, validate and implement best-in-class equipment, methods, processes and training that improve manufacturing productivity and quality while reducing energy costs, material and labor inputs and other production wastes. This effort may include innovating or inventing cleaner methods and processes where none exist or developing new clean-enabled products and strategies for expanding markets and applications. CleanLogix LLC delivers real, measurable value to your business by decreasing time, space, material, labor, energy, and capital wastes. 5 | Page Proven Hands-on Experience… Creating new Industry • Founded CleanLogix to develop various markets and applications for advanced clean manufacturing technologies using an outsourced manufacturing and value-add reseller (VAR) business development strategy. • Spearheaded a 25 year CO2 technology development and commercialization effort that included production tools utilizing all phases of CO2. Consulting to Industry • Successfully secured project financing from the United Soybean Board for a program to demonstrate a novel employment of soy-based lubricants in combination with near-cryogenic fluids for precision machining applications. • Developed wastewater and storm water discharge compliance strategies for customers such as Warner Brothers Studios, Mobil Oil, and the City of Los Angeles. • Served as an Expert Technical Witness on behalf of Stainless Steel Products (SSP), Burbank, CA in a successful defense against unlawful industrial wastewater discharges in a class action lawsuit filed by the (EPA) Department of Justice. • Managed industrial waste discharge program and treatment plant laboratory operations for the City of Burbank, California. • Managed EPA-certified testing laboratory facilities at several publicly owned wastewater treatment plants located throughout Southern California, including the cities of Rialto, Arrowhead, Pismo Beach, San Juan Capistrano and Camarillo. • Trained plant operators in various pollution testing protocols including gas chromatography, atomic absorption spectrophotometry, wet chemical analysis, physical analysis, fish toxicity bioassay, and radiochemical analysis. • Implemented treated wastewater discharge impact assessments including several ocean outfall sediment recovery dive expeditions, and lake water and bottom sediment pollution studies. 6 | Page Working within Industry • Principle investigator under a Department of Energy (DOE) grant to investigate the energy savings potential for CO2-enabled precision machining operations. • Established new outsourced programs for marketing and selling carbon dioxide (CO2) based clean manufacturing products for Cool Clean Technologies (technology owned by and licensed from CleanLogix) as well as products from several other CleanTech companies • Managed corporate environmental engineering programs including employee Right-to- Know and Proposition 65 notification training, air pollution control permitting, wastewater treatment, and hazardous waste management. • Implemented waste minimization programs for manufacturing facilities involving machining, welding, electroplating, powder coating, precision cleaning and wastewater treatment operations. • Served as a contamination control specialist and consultant, providing technical support for various programs such as Airborne Optical Adjunct (AOA) and Boost Surveillance Tracking System (BSTS). • Managed precision cleaning and functional fluids testing facilities. • Developed first-generation liquid and supercritical CO2 cleaning technology. • Developed solvent replacement technology called the Reactive Aqueous Defluxing System (RADS) for de-fluxing printed circuit boards. • Lead investigator and principal author of Hughes corporate study and report: “Chlorofluorocarbons (CFCs) Usage Audit and Replacement Opportunity Assessment” in preparation for the 1989 Montreal Protocol ODS phase-out. 7 | Page Meeting the Challenge… A Better Way to Clean Hard Disk Drives A major disk drive manufacturer required a dry and selective cleaning process to replace ultrasonic aqueous operations for cleaning disk drive components. CO2 composite spray cleaning was selected due to its ability to effectively remove microscopic particles and residues from partially assembled hard disk drive components. Fully- burdened cleaning costs were reduced between 60% and 85%, a $2,000,000 per year operating cost reduction. Clean Machining A machining company needed a viable PCD-coated tool turning process to replace a 3-hour Tungsten Carbide (WC) grinding operation using a diamond wheel. CO2 machining technology improved PCD-coated carbide insert life by greater than 10x (1000%) with 2x (200%)
Load more

Recommended publications
  • Precision Cleaning Applications
    CHAPTER 3 PRECISION CLEANING APPLICATIONS 3.1. BACKGROUND Precision cleaning applications are characterised by the extremely fine level of cleanliness required to keep delicate instruments and surfaces operating effectively. Although precision cleaning is needed in a wide variety of industries, several key factors define the applications where precision cleaning is required. These include those applications in which (1) critical cleanliness standards of particulate and/or organic contaminants need to be satisfied, (2) components have sensitive compatibilities, (3) components I $ have physical characteristics such as geometry and porosity which make dewatering crucial in the cleaning process, and (4) components being cleaned are costly. A variety of particulate and nonparticulate contaminants are removed in precision cleaning operations. Particulate contamination includes scrap material created during cutting, drilling, grinding, and buffing of precision parts (e.g., silicon wafers and aluminum storage disk substrates). Nonparticulate contamination includes waxes, finger print oils, and other contaminants. As the term suggests precision cleaning involves cleaning components to extremely strict standards of cleanliness. A good indication of the cleaning ability required for precision cleaning processes is provided in Figure 111-1, which shows the clearance on a computer disk drive relative to the size of various contaminants. The factor that made CFC-113 the precision cleaning solvent of choice is its remarkable chemical stability (manifested directly in its compatibility to structural materials), its low toxicity, and zero flammability. This has * 1991 UNEP SOLVENTS. COATINGS, AND ADHESIVES REPORT * -1 31- Figure III-I SIZE COMPARISON OF COMPUTER DISK DRIVE HEAD CLEARANCE WITH VARIOUS CONTAMINANTS ' !! allowed closed, superclean, white-room assembly areas to be operated safely and effectively.
    [Show full text]
  • Cleaning with Supercritical Carbon Dioxide
    Cleaning with Supercritical Carbon Dioxide Ken Laintz and Dale Spall Los Alamos NATIONAL LABORATORY Chemical Science and Technology Organic Analytical Chemistry CST-12, MS E537 Los Alamos, New Mexico 87545 (505) 665-3545, FAX (505) 667-6561 Outline Supercritical Fluids Cleaning Operations using Supercritial Fluid Solvents Experimental Cleaning Results Other Cleaning Applications Significant Properties of Supercritical Fluids 0 High diffusivity results in high mass transfer 0 Low viscosity and surface tension results in small pore penetration 0 High density results in solvent properties similar to liquids 0 Density is a selective function of temperature and pressure Solute Extraction and Removal Kinetics Extraction Time Operational Economics of Cleaning Prospects Direct Labor Indirect Labor Factory Costs Labor Expenses Benefits Factory Overhead Depreciation Cycle Time Costs Maintenance New Technology Changeover Costs Facility Space Costs Consumables Consumables Disposal Costs Liability Costs Utilities Energy and Utilities Aqueous Supercritical CO2 Taxes and Fees Administration Semi-aqueous Finance Capital Costs Finance Charges Quality Cost of Quality JAAST Joint Association for the Advancement of Supercritical Fluid Technology Mission: To develop and disseminate SCF cleaning applications in support of environmentally conscious manufacturing to meet the needs of the government and industry Members Hughes Aerospace Applied Separations DOE U. Mass. Lowell Allied Signal Autoclave Engineers EPA U. South Carolina Ciba Vision CF Technologies SNL
    [Show full text]
  • Development and Design of a High Pressure Carbon Dioxide System for the Separation of Hazardous Contaminants from Non-Hazardous Debris*
    DEVELOPMENT AND DESIGN OF A HIGH PRESSURE CARBON DIOXIDE SYSTEM FOR THE SEPARATION OF HAZARDOUS CONTAMINANTS FROM NON-HAZARDOUS DEBRIS* Carol L. J. Adkins and Edward M. Russick <~~ 'f\ «//) - cj^'- - / ^ 61 Sandia National Laboratories, Albuquerque, NM -^ " H. Mike Smith and Ron B. Olson AlliedSignal Inc., Kansas City Division, Kansas City, MO ABSTRACT Under the Department of Energy (DOE)AJnited States Air Force (USAF) Memorandum of Understanding, a system is being designed that will use high pressure carbon dioxide for the separation of oils, greases, and solvents from non-hazardous solid waste. The contaminants are dissolved into the high pressure carbon dioxide and precipitated out upon depressurization. The carbon dioxide solvent can then be recycled for continued use. Excellent extraction capability for common manufacturing oils, greases, and solvents has been measured. It has been observed that extraction performance follows the dilution model if a constant flow system is used. The solvents tested are extremely soluble and have been extracted to 100% under both liquid and mild supercritical carbon dioxide conditions. These data are being used to design a 200 liter extraction system. KEY WORDS: Supercritical, Carbon dioxide, Cleaning 1. INTRODUCTION Large quantities of solid wastes such as rags, kimwipes, swabs, coveralls, gloves, etc., contaminated with oils, greases and hazardous solvents are generated by industry and the government. At present, these materials must be treated as hazardous waste, and the cost of disposal of such large volumes of hazardous materials is high. If the hazardous components (oils, greases and solvents) could be segregated from the much larger bulk of non-hazardous material, then these solid materials could potentially be handled as sanitary waste at significant cost savings.
    [Show full text]
  • Supercritical Fluid Carbon Dioxide Cleaning of Plutonium Parts
    I SUPERCRITICAL FLUID CARBON DIOXIDE BACKGROUND CLEANING OF PLUTONIUM PARTS A supercritical fluid is the comprcssed, dense gas phase Stephanie J. Hale above the critical temperature. Liquefaction of a gas can EG&G Rocky Flats, Inc occur upon compression below the critical temperature, but above the critical temperature the gas cannot liquefy regardleas of the applied pressure and a single gas phase is ABSTRACT maintained. The critical point for carbon dioxide is 31'C and 74 bar (1088 psi) which means that the supercritical Supercritical fluid carbon dioxide is under investigation in fluid can be aUnined under relatively mild conditions. this work for use as a cleaning solvent for the final cleaning of plutonium parts. These parts must be free of The phase diagram of CO, (Figure 1) shows the organic residue to avoid cormsion in the stockpile. Initial supcrcritical region above 74 bar and the 32" isotherm. It studies on stainless steel and full-scale mock-up parts can be seen that very liquid-like densities can be achieved indicate that the oils of interest are easily and adequately and still remain in the gas phase. cleaned from the metal surfaces with supercritical fluid carbon dioxide. Results from compatibility studies show that undesirable oxidation or other surface mctions are not occurring during cxposureof plutonium to the supercritical fluid. Cleaning studies indicate that the oils of interest are Temperalure ' removed from the plutonium surface under relatively mild conditions. These studies indicate that supercritical fluid carbon dioxide is a very promising cleaning medium for this application. INTRODUCTION Our aim in this work is to develop a cleaning process that van u-o clean plutonium parts.
    [Show full text]
  • Supercritical Carbon Dioxide Precision Cleaning for Solvent and Waste Reduction
    '1 *, - .L**LIL. I,.. .. ." larernarional Journal of Environmentally Consciaus Design & Manufacturing. Vol. 2, No. 1. pp, 8 1-86. 1993 Printed in the U.S.A. .. mest- -. Pollution Prevention Research Center 1326 Ftfth Avenue, Sutre 650 Seattle, WA 98101 (206)223-1 151 SUPERCRITICALCARBONDIOXIDE PRECISIONCLEANING FOR SOLVENT ANDWASTE REDUCTION W. DALESPALL Los ALAMOSNATIONAL LABORATORY Los ALAMOS,NM 87545 Murph?s Law of Cleaning: You can't get thepart cleanerthan the dishwater, but is itpossible to get both the part and the dishwater dirty. Supercritical carbon dioxide as a cleaning solvent offers many advantages for the cleaning of selected materials. This paper discusses the applicability ofsupercritical carbon dioxide to precision cleaning of a wide variety of parts. The economics involved and a description of the work in progress is included. INTRODUCTION after cleaning. Specifications such as this lead to many Ascetics, performance, improved work life, product parts being overcleaned, while others are undercleaned. specifications, and marketing strategies are among the The rigidity of specifications often rests on habitual prac- many reasons to clean an object. Currently, cleaning tices rather than actual needs. Specifications should con- technologies can be divided into two broad categories, sider how clean a part needs to be to meet speicific aqueous and non-aqueous based. These technologies requirements on the whole. This should lead to more face an upheaval brought on by imposition of the Montreal cleaning for some parts, but to less cleaning for most parts. Protocol, which restricts or prevents the use of chlo- Because theentire cleaning process is now at question, rofluorocarbons (CFCs) for all uses, from refrigerants to manufacturing engineers should seize this oppofluniiy to dry cleaning.
    [Show full text]
  • Solvent Substitution
    DE-AC07-76ID01570 A Proceedings/Compendium of Papers HOY 2 SOLVENT SUBSTITUTION Based on The First Annual International Workshop on Solvent Substitution December 4-7, 1990 Phoenix, Arizona sponsored by The U.S. Department of Energy Office of Technology Development Environmental Restoration and Waste Management and U.S. Air Force Engineering & Services Center CONF-901285- DE92 003262 A Proceedings/Compendium of Papers SOLVENT SUBSTITUTION Based on The First Annual International Workshop on Solvent Substitution December 4-7, 1990 Phoenix, Arizona MASTER sponsored by ^ UNUMITSD OFTH1SDOCUM^..? The U.S. Department of Energy Office of Technology Development Environmental Restoration and Waste Management and U.S. Air Force Engineering & Services Center DE-ACO7-76IDO1570 Proceedings/Compendium of Papers SOLVENT SUBSTITUTION based on The First Annual International Workshop on Solvent Substitution December 4-7. 1990 Phoenix, Arizona The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4-7, 1990, at rhe Executive Conference Center, The Pointe at Tapatio Cliffs, Phoenix, Arizona. The primary objectives of this joint effort were to: •Share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents. •Aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. This highly successful 2-1/2 day event brought together over 300 leading national and international experts from industry, federal and state government agencies, various branches of the Armed Services, research laboratories, universities and public interest groups.
    [Show full text]
  • The Actinide Research Quarterly
    Spring 1997 Los Alamos National Laboratory • A U.S. Department of Energy Laboratory The Actinide Research 55 Quarterly TA o f t h e N u c l e a r M a t e r i a l s T e c h n o l o g y D i v i s i o n In This Issue NMT Division Completes First Three-Year Review Cycle 1 On March 17–19, NMT Division 1997, NMT Division Completes First held its third Science Three-Year Review and Technology Cycle Assessment (also called “the Division 3 Review”) in the J. Tomorrow's Pen Is Robert Oppenheimer Mightier than Study Center and in Yesterday's Sword the TA-55 Access Center. With the 4 completion of this Study Addresses year’s Science and Chloride Tolerance Technology Assess- Limits for the Safe ment on “Stockpile Processing Stewardship and of Radioactive Salts Space Mission,” NMT rn97090-156 has covered all of its Committee members (left to right) Dr. Gregory Choppin, Dr. Ned 6 programmatic efforts Wogman, and Dr. Stephen Carpenter with NMT Division Director Computer-Based and other diverse Bruce Matthews. Waste Management scientific and techni- System Reaps cal activities. During Benefits each of the three reviews, the division also falling under the main review theme. On highlighted topical infrastructure and facility the third day of the review, the committee 8 operations. moved to TA-55 and had further, separate LANL Evaluates An eleven-member (see page 11) Division discussions with the Nuclear Materials and Commercial Mobile Review Committee convened the evening of Stockpile Management (NMSM) Program Nondestructive the 16th for a logistical session, and for the Director Paul Cunningham, several DOE Assay Systems next day and a half the committee listened to representatives, and a few NMT technical presentations ranging from a state-of-the- staff members.
    [Show full text]
  • Losalamos NATIONAL LABORATORY
    LA-UR- 93-3103 Title SUPERCRITICAL FLUID CARBON DIOXIDE CLEANING OF PLUTONIUN PARTS Author(s) S. J. Hale Submitted to Environmentally Conscious Manufacturing Congress ‘93 Arlington, VA August 30, 1993 — LosAlamos NATIONAL LABORATORY Los Alamos National Iatwatwy, m Mrmatiw mtionkqual opport.”ily empbyer, is operated by the U“iverslly of CaMornia for the U.S. Depamnem of Energy under C3ntrati W-7405-ENG-36. By mcsplama d tfis anic!+ the p.bkher recognizes that the U.S. Gwemmem retains a nonexclusive, royalty free Mcense m publish or reproduce the published form of this Oamdbuflon, or m allow others to do so, for u.S. Government purposes. Tho Los Alamos National Laboratory requests that the publisher iientify lM anicle as wok p-alormed uc.der the auspims of the u.S. Depamrmt of E“wgy. =2/J%%: i3STRIBUTION OF THIS DOCUMENT- IS UNLIMITED SUPERCRITICAL FLUID CARBON DIOXIDE CLEANING OF PLUTONIUM PARTS Stephanie J. Hale John M. Haachke Lawrence E. Cox Los Afamos National Laboratory Los Alamos, New Mexico 87544 ABSTRACT Supercritical fluid (SCF) carbon dioxide (C02) is being evaluated for use as a cleaning solvent to replace 1,1,1-trichloroethane for the final cleaning of plutonium (Pu) parts. These parts must be free of organic residue to avoid corrosion in the stockpile. Thermodynamic and kkretic data for selected reactions of Pu metal are evaluated as a basis for assessing the risk of a violent exothermic reaction during the use of SCF C02 on Pu. The need for considering kinetic behavior of a reaction in assessing its thermal risk is demonstrated.
    [Show full text]
  • ACP Systems Quattroclean Leads the Way for CO2 Snow Jet Technology - British Plastics and Rubber
    24.1.2019 ACP Systems quattroClean leads the way for CO2 snow jet technology - British Plastics and Rubber Search... HOME INDUSTRY NEWS MACHINERY MATERIALS ENVIRONMENT EVENTS BLOGS SUBSCRIBE Home / Machinery / 22 January 2019 16:33 ACP Systems quattroClean leads the way for CO2 snow jet technology by Tom Walker RSS Print ACP Systems is paving the way for CO2 snow jet technology with its proven quattroClean system. The dry cleaning solution has significant cost, space and resource savings, as well as being easily integrated into painting lines, and can counteract adhesion problems found with powerwash systems. Plastic components have long been cleaned with powerwash systems prior to painting, with components being cleaned with an alkaline medium, followed by several rinsing zones, an adhesive water dryer and a cooling zone. https://www.britishplastics.co.uk/machinery/acp-systems-quattroclean-leads-the-way-for-co2-snow-jet-tech/ 1/6 24.1.2019 ACP Systems quattroClean leads the way for CO2 snow jet technology - British Plastics and Rubber Cleaning not only takes up a lot of production space, but also consumes large quantities of resources. In contrast to wet-chemical processes, the quattroClean system from ACP Systems uses a dry cleaning technology with a liquid carbon dioxide cleaning medium, which has an almost indefinite shelf life. It is also environmentally neutral, generated as a by-product in the chemical industry, as well as when energy is generated from biogas. The non-combustible, non-corrosive and non-toxic carbon dioxide is fed through the non-wearing two-component ring nozzle and expands on exiting to form fine CO2 snow crystals.
    [Show full text]
  • Montreal Protocol
    MONTREAL PROTOCOL ON SUBSTANCES THAT DEPLETE THE OZONE LAYER 1998 REPORT OF THE SOLVENTS, COATINGS AND ADHESIVES TECHNICAL OPTIONS COMMITTEE (STOC) 1998 Assessment Montreal Protocol on Substances that Deplete the Ozone Layer UNEP 1998 REPORT OF THE SOLVENTS, COATINGS AND ADHESIVES TECHNICAL OPTIONS COMMITTEE (STOC) 1998 ASSESSMENT The text of this report is composed in Arial. Co-ordination: Solvents, Coatings and Adhesives Technical Options Committee (STOC) Composition: Mohinder Malik (Co-chair) Layout: Angelika Pein / Birgit Hägele Reproduction: UNEP Nairobi, Ozone Secretariat Date: December, 1998 No copyright involved Printed in Kenya; 1998 ISBN 92-807-1732-4 1998 UNEP STOC Assessment Report - Page i DISCLAIMER The United Nations Environment Programme (UNEP), the Technology and Economic Assessment Panel (TEAP) co-chairs and members, the Technical and Economic Options Committee, chairs, co-chairs and members, the TEAP Task Forces co-chairs and members, and the companies and organisations that employ them do not endorse the performance, worker safety, or environmental acceptability of any of the technical options discussed. Every industrial operation requires consideration of worker safety and proper disposal of contaminants and waste products. Moreover, as work continues - including additional toxicity evaluation- more information on health, environmental and safety effects of alternatives and replacements will become available for use in selecting among the options discussed in this document. UNEP, the TEAP co-chairs and members, the
    [Show full text]
  • SUPERCRITICAL FLUID SPRAY APPLICATION PROCESS for ADHESIVES and PRIMERS SERDP Project PP-1118 Marc D. Donohue Principal Investi
    SUPERCRITICAL FLUID SPRAY APPLICATION PROCESS FOR ADHESIVES AND PRIMERS SERDP Project PP-1118 Marc D. Donohue Principal Investigator Johns Hopkins University March 2003 Preface Project Background In this project, we reformulated various solvent borne, high volatile organic compound (VOC) adhesives and adhesive primers, as cited in SERDP’s Statement of Need, for application by a supercritical carbon dioxide spray process. Over the last several years, a new spray application process has been developed for polymeric based paints and other coatings that can reduce solvent VOC emissions up to 80%. This process was conceived by the principal investigator of this project and has been commercialized by the Dow Chemical Company. This unique process (known as the UNICARBâ process) is based on the use of supercritical carbon dioxide as a replacement for organic solvents in multi-component spray coating formulations. By adapting this process to adhesives and adhesive primer applications, stringent compliance standards can be achieved respective to environmental, toxicological, materials compatibility, and, physical property performance characteristics as outlined in the original proposal and Statement of Need. Furthermore, by employing this process to apply adhesives that are presently used in the military, the costs incurred for developing and testing new (different) low/no-VOC, non-structural adhesives will be negated. To accomplish this task, a systematic program was implemented aimed at understanding the thermodynamic and rheological properties of adhesive-solvent-carbon dioxide mixtures for each type of adhesive and primer. Additionally, optimal conditions of temperature, pressure, and polymer/solvent ratio were determined for each adhesive and primer type such that proper atomization and film formation was achieved while simultaneously VOC emissions are minimized.
    [Show full text]
  • Contract Cleaning Services
    precision cleaning 1996 . surfaces, this method enables ‘visual- ization and classification of different materials. We have found a correlation between phase and friction imaging, an older technique for compositional imaging based on contact mode operation. Because it is based on TappingMode, phase imaging is gentler than friction imaging and provides bet- ter spatial resolution. q References 1. Images of these are included in Digital Insbwnents’ Application Note “Phase Imaging: Beyond Topography,” available upon request. Gmtozt Digital Instruments at (800) 873-9750 and ask for Felicta Kashevuroff in corporate cortununications. About the Author L% Don Cherno~ts the founder and president of Advance Surjixe Microscopy, an independent analytical service laboratory. Since 1986, Chernoff has been using scanning probe microscopy to tnvestigate and solve materials and processing problems for mmuf~twing, engineering and research 6b 2Ri.s article was reprinted with permtsston Figure 8: Contaminant deposit on glass. 5~ scans. a) TappingMode dual image showing the liq- from Digttd Instruments and Dr Cherno~ and uid-air interface of oil droplets (bright bumps in the height data, dark regions in phase). Needle- was orighdly adapted from his talk to the like crystals are bright and crisply-defined in the phase image. b) Contact mode dual image (height and friction) showing the substrate under the oil droplets and a cluster of crystals on NcumScope Users’ Meeting at S7M ‘95. the substrate. The oil droplets had high friction due to surface tension at the oil-probe inter- face. The crystal had low friction. Note: To make this comparison, we had to change probes and scanning modes and return to the same spot on the specimen.
    [Show full text]