2020 Cadillac CT6 Super Cruise Personalization Guide

Total Page:16

File Type:pdf, Size:1020Kb

2020 Cadillac CT6 Super Cruise Personalization Guide 2020 CT6 SUPER CRUISE™ Convenience & Personalization Guide cadillac.com Review this guide for an overview of the Super Cruise™ driver assistance feature in your CT6. Even Certain restrictions, precautions and safety while using Super Cruise, always pay attention while driving and do not use a hand-held device. Visit procedures apply to your vehicle. Please read cadillacsupercruise.com for compatible highways and more information. Operation requires active your Owner’s Manual for complete instructions. OnStar plan, active Wi-Fi hotspot, working electrical system, cell reception, and GPS signal. SUPER CRUISE OVERVIEW Adaptive Cruise Super Cruise/Driver Steering Adaptive Cruise Driver Control–Advanced/ Assistance Page Wheel Light Control–Advanced Super Cruise Attention Super Cruise Buttons (if selected) Bar Symbol Symbol Camera 2 SUPER CRUISE OPERATION Super Cruise is a hands-free driver assistance feature for use on While Super Cruise is engaged, an escalating series of prompts lets compatible highways. The system steers the vehicle to maintain you know if the Driver Attention Camera senses that you need to pay lane position while also monitoring your attention to the road. more attention to the road ahead. Working with the Adaptive Cruise Control–Advanced system, it The steering wheel light bar intuitively provides a status of system reduces the need for you to frequently steer, brake or accelerate operation, including when the system is steering and when you under available operating conditions. need to manually steer the vehicle. You can override Super Cruise at To maintain automatic control of vehicle steering during high- any time by steering, braking or accelerating. way driving, Super Cruise uses Global Positioning System (GPS) If you do not respond to system prompts to manually steer the sensing, GPS-enhanced data, a high precision map, and a network vehicle, Super Cruise will be disabled and OnStar will be contacted of cameras. to provide support. Even while using the Super Cruise driver assistance feature, always Super Cruise: pay attention while driving and do not use a hand-held device. Visit cadillacsupercruise.com for compatible highways and more • Does not prevent crashes or warn of possible crashes. information. • Does not steer to avoid stopped or slow-moving vehicles, cross- traffic, construction barriers or cones, motorcycles, children, HOW SUPER CRUISE WORKS pedestrians, animals, or other objects on the road. The Super Cruise driver assistance feature is available only on com- • Does not steer in response to vehicles or objects next to your patible highways that are separated from opposing traffic. The GPS vehicle, including vehicles attempting to enter your lane. uses real-time corrections and map data to determine the vehicle’s location while the Lane Sensing Camera detects the marked lanes • Does not respond to traffic lights, stop signs, or other traffic on the highway to help the vehicle automatically steer and maintain control devices. lane position. • Does not respond to crossing traffic. The system works with Adaptive Cruise Control–Advanced, which • Does not change lanes or make turns. detects vehicles traveling in the same direction in your path and • Does not steer to merge onto or to exit highways. accelerates or brakes your vehicle to maintain a driver-selected following gap time from a vehicle ahead, even in stop-and-go traffic • Does not steer to avoid or steer through construction zones. conditions. It's extremely important that you pay attention to the operation of When engaged, Super Cruise provides feedback on system status the vehicle, even while using Super Cruise. Always be prepared to while tracking driver head position and using alerts that prompt you take over operation of the vehicle at all times. to pay close attention to the road and steer manually when needed. See Driving and Operating in your Owner’s Manual. 3 ENGAGING SUPER CRUISE To use the Super Cruise driver Do not remove your hands from the steering wheel unless the light assistance feature, Adaptive B A bar is green, indicating Super Cruise is steering the vehicle. Cruise Control–Advanced If an Adaptive Cruise Control–Advanced speed was not previously must be on. set, the current speed will be the cruise set speed used by Super 1. Press the Adaptive Cruise. Cruise Control–Advanced To disengage Super Cruise, press the Super Cruise button button (A) on the steer- again or press the brake pedal. ing wheel to turn on the system. The symbol CHANGING LANES C D (C) will illuminate in white The vehicle can be steered manually at any time. on the instrument cluster. 1. Move the steering wheel manually. The steering wheel light bar If the system is already set, pulses blue. the will be green with a speed shown. 2. Steer the vehicle into the desired lane. 2. When Super Cruise detects 3. To allow Super Cruise to resume steering, center the vehicle in you are on a compatible the lane until the light bar turns green. highway, paying sufficient SUPER CRUISE AVAILABILITY attention, and all other Super Cruise can be engaged only when: driving conditions are met E (lane markings visible, GPS • Adaptive Cruise Control–Advanced is on. available, no system faults, • Enhanced Automatic Emergency Braking is set to Alert and etc.), the Super Cruise Brake. Go to Settings > Vehicle > Collision/Detection Systems > symbol (D) will illuminate Forward Collision System. in white on the instrument • The vehicle is on a compatible highway, which generally only cluster. allows high-speed traffic and is separated from opposing traffic. 3. When it is safe to do so, • Camera or radar sensors are not obstructed or damaged. press the Super Cruise button (B) on the steering • Lane markings are clearly visible. Do not use Super Cruise in wheel to engage Super poor weather conditions or when visibility is limited. Cruise. When the symbol (E) and steering wheel light bar • Driver attention is detected. illuminate in green, you may remove your hands from the • Teen Driver is not active. steering wheel. 4 See Driving and Operating in your Owner’s Manual. STEERING WHEEL LIGHT BAR INDICATORS When the Super Cruise driver assistance feature is not engaged, the light bar is not visible on the steering wheel and the Super Cruise symbol on the instrument cluster is not illuminated. You must steer the vehicle. When Super Cruise is engaged, the steering wheel light bar and Super Cruise symbol indicate system status. Solid Green Bar and Super Cruise is active and automatically steering the vehicle. Solid Green Symbol Flashing Green Bar and Super Cruise is active, but the system detects that you need to Solid Green Symbol pay more attention to the road. (1st Alert) Pulsing Blue Bar and Super Cruise is active, but the system detects that you are Solid Blue Symbol manually steering. To return to automatic steering, position the vehicle in the center of the lane and hold the steering wheel steady until the green indicators appear. Flashing Red Bar, Solid You need to take steering control immediately. The system Red Symbol, and Safety cannot operate properly under current conditions. The vehicle Alert Seat Pulses or will begin to coast until you take steering control. Super Beeps Sound Cruise must be re-engaged to use the system again. (2nd Alert) Flashing Red Bar, Solid You need to take steering control immediately. A voice Red Symbol, Safety Alert prompt will tell you to take over steering control. If you do not Seat Pulses or Beeps take steering control, the vehicle will steer and brake gradu- Sound, and Voice Prompt ally to a stop. Super Cruise will not be available until the next (3rd Alert) ignition cycle. 5 See Driving and Operating in your Owner’s Manual. ATTENTION ALERTS DRIVER ATTENTION CAMERA The vehicle will not accelerate while the light bar is flashing red. When the Super Cruise driver The steering wheel light bar will also flash red when: assistance feature is engaged, • Adaptive Cruise Control–Advanced is canceled. the Driver Attention Camera, located on top of the steer- • The vehicle is on a tight curve or speed is too fast. ing column, focuses on your • Lane markings are poor or visibility is limited. attention to the road ahead. • The lane or highway ends. It works with infrared lights to track head position to • The vehicle is exiting the highway. determine where you are • There is a system fault. looking. Note: The Driver Attention Camera does not record photos, audio or video. 3RD ALERT If the steering wheel light 1ST ALERT bar flashes red for too long, If the system detects that you may not be paying attention suffi- a voice prompt will be heard. ciently to the road ahead, the steering wheel light bar flashes green You should take over steer- to prompt you to return your attention to the road. ing immediately; otherwise, The light bar will stop flashing when the system detects your the vehicle will slow in your attention to the road has resumed. lane of travel and eventually brake to a stop. Super Cruise 2ND ALERT and Adaptive Cruise Control– If the steering wheel light bar flashes green for too long and the Advanced will disengage. system determines continued lack of attention to the road ahead, In the event of an unrespon- the steering wheel light bar flashes red to notify you to look at the sive driver, the vehicle will come to a controlled stop, activate the road and steer the vehicle manually. hazard lights, and contact OnStar Emergency Services. The Safety Alert Seat also pulses or beeps sound (if selected). To change the Safety Alert Seat setting, go to Settings > Vehicle > See Driving and Operating in your Owner’s Manual. Collision/Detection Systems > Alert Type. 6 MESSAGING DRIVER ASSISTANCE PAGE The Super Cruise driver assistance The Driver Assistance page, feature may not be available or may showing Super Cruise and disengage when active based on sev- Adaptive Cruise Control– eral operating conditions.
Recommended publications
  • Vehicle Technical Information Guide for Cruise Control
    Vehicle Technical Information Guide For Cruise Control Model Years: 1996-2009 FOR PRE 1996 VEHICLE INFORMATION, REQUEST FORM #4429 TECHNICAL SERVICE PHONE: (910) 277-1828 TECHNICAL SERVICE FAX: (910) 276-3759 WEB: WWW.ROSTRA.COM FORM #4428, REV. L, 02-17-09 WARNING: The information presented in this manual has been carefully compiled through actual vehicle testing and manufacturers service manual research and to the best of our ability is accurate. However, we do not warrant the accuracy of this infor- mation against changes in vehicle design, the use or misuse of this information or typographical errors. It is the responsibility of installer to verify the signal and color on the wire attachments prior to and after the installation of the cruise control to assure proper operation of the cruise control and the vehicle through a road test. We do not accept any responsibility for damage to the vehicle or injury to its occupants caused by the use of this information. Connection to the incorrect wires could cause cruise control or vehicle malfunctions and component damage. These conditions can cause a major risk while driving for you, your passengers and other motorists, exposing all of you to the risk of acci- dent and injury. Any installation of a cruise control on a vehicle that does not have clearance at the throttle for lost motion or may have interference by other parts must have the cruise control cable attached to the WARNING: accelerator pedal for obvious safety reasons. Any installation of a cruise control on a vehicle with an accelerator pedal activated switch for emissions or transmission shifting must have the cruise control cable attached to the accelerator pedal for proper vehicle operation.
    [Show full text]
  • Design and Validation of Safety Cruise Control System for Automobiles
    DESIGN AND VALIDATION OF SAFETY CRUISE CONTROL SYSTEM FOR AUTOMOBILES Jagannath Aghav and Ashwin Tumma Department of Computer Engineering and Information Technology, College of Engineering Pune, Shivajinagar, Pune, India {jva.comp, tummaak08.comp}@coep.ac.in ABSTRACT In light of the recent humongous growth of the human population worldwide, there has also been a voluminous and uncontrolled growth of vehicles, which has consequently increased the number of road accidents to a large extent. In lieu of a solution to the above mentioned issue, our system is an attempt to mitigate the same using synchronous programming language. The aim is to develop a safety crash warning system that will address the rear end crashes and also take over the controlling of the vehicle when the threat is at a very high level. Adapting according to the environmental conditions is also a prominent feature of the system. Safety System provides warnings to drivers to assist in avoiding rear-end crashes with other vehicles. Initially the system provides a low level alarm and as the severity of the threat increases the level of warnings or alerts also rises. At the highest level of threat, the system enters in a Cruise Control Mode, wherein the system controls the speed of the vehicle by controlling the engine throttle and if permitted, the brake system of the vehicle. We focus on this crash area as it has a very high percentage of the crash-related fatalities. To prove the feasibility, robustness and reliability of the system, we have also proved some of the properties of the system using temporal logic along with a reference implementation in ESTEREL.
    [Show full text]
  • Adaptive Cruise Control System Evaluation According to Human Driving Behavior Characteristics
    actuators Article Adaptive Cruise Control System Evaluation According to Human Driving Behavior Characteristics Lin Liu 1, Qiang Zhang 2, Rui Liu 3, Xichan Zhu 1,* and Zhixiong Ma 1 1 School of Automotive Studies, Tongji University, Shanghai 201804, China; [email protected] (L.L.); [email protected] (Z.M.) 2 State Key Laboratory of Vehicle NVH and Safety Technology, Chongqing 401122, China; [email protected] 3 School of Automobile, Chang’an University, Xi’an 710064, China; [email protected] * Correspondence: [email protected] Abstract: With the rapid and wide implementation of adaptive cruise control system (ACC), the testing and evaluation method becomes an important question. Based on the human driver behavior characteristics extracted from naturalistic driving studies (NDS), this paper proposed the testing and evaluation method for ACC systems, which considers safety and human-like at the same time. Firstly, usage scenarios of ACC systems are defined and test scenarios are extracted and categorized as safety test scenarios and human-like test scenarios according to the collision likelihood. Then, the characteristic of human driving behavior is analyzed in terms of time to collision and acceleration distribution extracted from NDS. According to the dynamic parameters distribution probability, the driving behavior is divided into safe, critical, and dangerous behavior regarding safety and aggressive and normal behavior regarding human-like according to different quantiles. Then, the baselines for evaluation are designed and the weights of different scenarios are determined according to exposure frequency, resulting in a comprehensive evaluation method. Finally, an ACC system is Citation: Liu, L.; Zhang, Q.; Liu, R.; tested in the selected test scenarios and evaluated with the proposed method.
    [Show full text]
  • Adaptive Cruise Control System Overview
    5th Meeting of the U.S. Software System Safety Working Group April 12th-14th 2005 @ Anaheim, California USA Adaptive Cruise Control System Overview 1 Introduction Adaptive Cruise Control (ACC) is an automotive feature that allows a vehicle's cruise control system to adapt the vehicle's speed to the traffic environment. A radar system attached to the front of the vehicle is used to detect whether slower moving vehicles are in the ACC vehicle's path. If a slower moving vehicle is detected, the ACC system will slow the vehicle down and control the clearance, or time gap, between the ACC vehicle and the forward vehicle. If the system detects that the forward vehicle is no longer in the ACC vehicle's path, the ACC system will accelerate the vehicle back to its set cruise control speed. This operation allows the ACC vehicle to autonomously slow down and speed up with traffic without intervention from the driver. The method by which the ACC vehicle's speed is controlled is via engine throttle control and limited brake operation. 2 Definitions and Physical Overview clearance ACC Vehicle (time gap = clearance / vehicle speed) Target Vehicle Forward Vehicle Figure 1 – ACC Vehicle Relationships 1 2.1 Definitions Adaptive Cruise Control (ACC) – An enhancement to a conventional cruise control system which allows the ACC vehicle to follow a forward vehicle at an appropriate distance. ACC vehicle – the subject vehicle equipped with the ACC system. active brake control – a function which causes application of the brakes without driver application of the brake pedal. clearance – distance from the forward vehicle's trailing surface to the ACC vehicle's leading surface.
    [Show full text]
  • ELITE DIGITAL SPEEDOMETER Installation Tips
    INSTALLATION INSTRUCTIONS ELITE DIGITAL SPEEDOMETER 2650-1951-77 Models 6789-CB, 6789-PH, 6789-SC, 6789-UL QUESTIONS: If after completely reading these instructions you have questions regarding the operation or installation of your instrument(s), please contact AutoMeter Technical Service at 866-248-6357. You may also email us at [email protected]. Additional information can also be found at http://www.autometer.com. General Information This instrument utilizes a single LCD to display odometer and two trip odometer mileages. Press the Trip (Right) button on the dial window to cycle between odometer, Trip 1, and Trip 2 displays on the LCD. Pressing and holding the Trip button for more than 2 seconds while viewing either Trip display will reset the trip currently being displayed. The odometer cannot be reset. NOTE: The odometer on the speedometer portion of this instrument will show some mileage less than 5 miles (8km). This is a result of factory testing to ensure optimum quality. TIP: AutoMeter always recommends performing the calibration process for best speedometer accuracy. Speedometer Senders: The electronic speedometer in this instrument is designed to operate with an electrical speed sensor. The speed sensor signal range must be between 500 and 400,000 pulses/mile (310 and 248,500 pulses/km). Any speed sensor or electronic module that meets the following two conditions can be used: 1. Pulse rate generated is proportional to vehicle speed. 2. Output voltage within the ranges listed below: a. Hall effect sender, 3 wire (5 to 16V) b. Sine wave generator, 2-wire (1.4 VAC min.) c.
    [Show full text]
  • Driver Assistance Technologies
    VEHICLE SHOPPER’S GUIDE Driver Assistance Technologies What is Driver Assistance Technology? Driver assistance technologies can warn your teenage driver that there is a car in their blind spot when switching lanes; apply the brakes for you if a child from your neighborhood darts into the street; or warn you if you are about to back into another car in the grocery store parking lot. But these technologies don’t drive your car; all vehicles still need a human driver behind the wheel. NHTSA created this guide to make today’s driver assistance technologies easy to understand for all drivers. Assisting With Backing Up & Parking Maintaining Safe Distance Rear Automatic Braking Traffic Jam Assist Applies your vehicle’s brakes Automatically accelerates for you to prevent a rear and brakes your vehicle along collision when backing up. with the flow of traffic, and keeps your vehicle between lane markings — even curves. Backup Camera Highway Pilot Provides you with a clear view Maintains your vehicle’s lane directly behind your vehicle. position and a determined following distance from the vehicle in front by automatically accelerating and braking as needed. Rear Cross Traffic Alert Warns you of a potential rear Adaptive Cruise Control collision that may be outside Automatically adjusts your the view of your backup vehicle’s speed to maintain a camera. set following distance from the vehicle in front. Preventing Forward Collisions Navigating Lanes Safely Forward Collision Warning Lane Departure Warning Detects and warns you of a Detects and warns that potential forward collision. your vehicle is drifting over the lane markings.
    [Show full text]
  • Cruise Control and Air Bags
    Cruise Control May use intake manifold vacuum to pull open the throttle. May use electric motor to open throttle. Computer controlled Needs driver input, vehicle speed input, and safety release features. Solenoids will add or remove engine vacuum to the throttle servo Driver InputVehicle Speed Input Computer Control Safety Release Cruise Control Looks at vehicle speed Requires input from driver Set Resume Coast Cruise Control Will be designed to release throttle if there is any malfunction ANY loss of power will release Vacuum Port Open all servo vacuum when OFF and turn OFF the Cruise Control Computer grounds one solenoid to increase or decrease vehicle speed Vacuum Ports Closed when Off Computer grounds one solenoid to increase or decrease vehicle speed Diagnose Cruise Control Check input from brake/clutch switch (very common fault on older cars) Ensure good vacuum to control servo Check input from cruise control switch Check input from vehicle speed sensor Check voltage at cruise control servo Cruise Control Switch Where is the cruise control switch located? Steering Column What is dangerous about removing the Horn Pad? Air Bags Before you remove the steering wheel you must disarm the air bag…. ….or you might get a very flat nose …. …………….or worse……... Supplemental Restraint System Must be disabled prior to removing the air bag module Designed to fire after loss of battery power DO NOT SAVE the memory if procedure says to remove a battery cable Supplemental Restraint System If deployed: Sodium Hydroxide powder is irritating to skin and lungs Clock spring connector likely needs replacing due to power surge Clock-Spring Coil Follow specific procedure for centering clock spring coil.
    [Show full text]
  • ADVANCED DRIVER ASSISTANCE TECHNOLOGY NAMES AAA’S Recommendation for Common Naming of Advanced Safety Systems
    JANUARY 2019 ADVANCED DRIVER ASSISTANCE TECHNOLOGY NAMES AAA’s recommendation for common naming of advanced safety systems NewsRoom.AAA.com Advanced Driver Assistance Technology Names (this page intentionally left blank) © 2019 American Automobile Association, Inc. 2 Advanced Driver Assistance Technology Names Abstract Advanced Driver Assistance Systems have become increasingly prevalent on new vehicles. In fact, at least one ADAS feature is available on 92.7% of new vehicles available in the U.S. as of May 2018.1 Not only are these advanced driver assistance systems within financial reach of many new car consumers (about $1,950 for the average ADAS bundle2), they also have the potential to avoid or mitigate the severity of a crash. However, the terminology used to describe them varies widely and often seems to prioritize marketing over clarity. The lack of standardized names for automotive systems adds confusion for motorists when researching and using advanced safety systems. The intent of this paper is to create a dialog with the automotive industry, safety organizations and legislators about the need for common naming for advanced driver assistance systems. Within this report, AAA is proposing a set of standardized technology names for use in describing advanced safety systems. AAA acknowledges that this is a dynamic environment, and that further input from stakeholders and consumer research will further refine this recommendation. To date, automakers have devised their own branded technology names which, for example, has resulted in twenty unique names for adaptive cruise control and nineteen different names for lane keeping assistance (section 3.2) alone. A selection of these names is shown in Figure 1.
    [Show full text]
  • Adaptive Cruise Control (ACC)
    uuHonda Sensing®uAdaptive Cruise Control (ACC) Adaptive Cruise Control (ACC) Helps maintain a constant vehicle speed and a set following-interval behind a vehicle 1Adaptive Cruise Control (ACC) detected ahead of yours, without you having to keep your foot on the brake or the accelerator. 3WARNING When to use Improper use of ACC can lead to a crash. Use ACC only when driving on expressways The camera is located or freeways and in good weather behind the rearview mirror. conditions. 3WARNING ACC has limited braking capability. When your vehicle speed drops below 22 mph (35 km/h), ACC will automatically cancel and no longer will apply your The radar sensor is behind Driving the emblem. vehicle's brakes. Always be prepared to apply the brake pedal when conditions require. ■ Vehicle speed for adaptive cruise control: Desired speed in a ACC can not be activated if Intelligent Traction range above roughly 25 mph (40 km/h) ~ Management setting is snow, sand* or mud* . ■ Gear positions for adaptive cruise control: In (D or (S * Not available on all models uuHonda Sensing®uAdaptive Cruise Control (ACC) ■ How to activate the system 1Adaptive Cruise Control (ACC) How to use Important Reminder ACC is on in the driver As with any system, there are limits to ACC. Use the information interface. brake pedal whenever necessary, and always keep a Adaptive cruise control is safe interval between your vehicle and other vehicles. ready to use. You can read about handling information for the camera equipped with this system. The radar sensor for ACC is shared with the Collision Mitigation Braking SystemTM (CMBSTM ).
    [Show full text]
  • Combined Brake and Steering Actuator for Automatic Vehicle Control
    CALIFORNIA PATH PROGRAM INSTITUTE OF TRANSPORTATION STUDIES UNIVERSITY OF CALIFORNIA, BERKELEY Combined Brake and Steering Actuator for Automatic Vehicle Control R. Prohaska, P. Devlin California PATH Working Paper UCB-ITS-PWP-98-15 This work was performed as part of the California PATH Program of the University of California, in cooperation with the State of California Business, Transportation, and Housing Agency, Department of Trans- portation; and the United States Department Transportation, Federal Highway Administration. The contents of this report reflect the views of the authors who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the State of California. This report does not constitute a standard, specification, or regulation. Report for MOU 331 August 1998 ISSN 1055-1417 CALIFORNIA PARTNERS FOR ADVANCED TRANSIT AND HIGHWAYS Combined Brake and Steering Actuator for Automatic Vehicle Research y R. Prohaska and P. Devlin University of California PATH, 1357 S. 46th St. Richmond CA 94804 Decemb er 8, 1997 Abstract A simple, relatively inexp ensive combined steering and brake actuator system has b een develop ed for use in automatic vehicle control research. It allows a standard passenger car to switch from normal manual op eration to automatic op eration and back seamlessly using largely standard parts. The only critical comp onents required are twovalve sp o ols which can b e made on a small precision lathe. All other parts are either o the shelf or can b e fabricated using standard shop to ols. The system provides approximately 3 Hz small signal steering bandwidth combined with 90 ms large signal brake pressure risetime.
    [Show full text]
  • Terrain-Adaptive Cruise-Control: a Human-Like Approach
    TERRAIN-ADAPTIVE CRUISE-CONTROL: A HUMAN-LIKE APPROACH A Dissertation by NARAYANI VEDAM Submitted to the Office of Graduate and Professional Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Chair of Committee, Shankar P. Bhattacharyya Co-Chair of Committee, Reza Langari Committee Members, Aniruddha Datta Ben Zoghi Head of Department, Miroslav M. Begovic December 2015 Major Subject: Electrical Engineering Copyright 2015 Narayani Vedam ABSTRACT With rapid advancements in the field of autonomous vehicles, intelligent control systems and automated highway systems, the need for GPS based vehicle data has grown in importance. This has provided for a plethora of opportunities to improve upon the existing vehicular systems. In this study, the use of GPS data for optimal regulation of vehicle speed is ex- plored. A discrete dynamic programming algorithm with a model predictive control (MPC) scheme is employed. The objective function is formulated in such a way that the weighting gains vary adaptively based on the road slope. Unlike in the prevalent approaches, this eliminates the need for a preprocessing algorithm to ensure tracking along flat stretches of road. Fuel savings of 0.48% along a downhill have been recorded. Also, the usage of brakes has been considerably reduced due to deceleration prior to descent. This is highly advantageous, particularly in the case of heavy-duty vehicles as they are prone to wearing of brake pad lining. Therefore, this method proves to be a simpler alternative to the existing methods, while incorporating the best attributes of a human driver and the tracking ability of a conventional controller.
    [Show full text]
  • Factsheet Advanced Cruise Control (ACC)
    SWOV Fact sheet Advanced Cruise Control (ACC) Summary Advanced Cruise Control (ACC), also known as adaptive or intelligent cruise control, not only maintains the driver-set vehicle speed, but also adjusts the vehicle's speed to that of a preceding vehicle, and helps to maintain a pre-selected headway time to the vehicle ahead. ACC systems can have a favourable effect on road safety when used on motorways with non-congested traffic. In these conditions ACC has a moderating effect on the driving speed, and decreases the percentage of very short headway times. Negative safety effects can be expected if ACC is used in busy traffic, and on rural and urban roads other than main roads. Furthermore, ACC can have a positive effect on fuel consumption and road capacity. New generations of even more intelligent ACC are being developed. Background and content In the late 1990’s, the car industry introduced the first Advanced Cruise Control systems (ACC) to the market as an extension of the ‘conventional cruise control’. ACC was developed as a comfort and convenience system rather than a safety system. However, it has often been hypothesised that ACC systems could also have positive effects on road safety, as well as on traffic efficiency and the environment. This fact sheet gives an overview of the current ACC systems and their effect on safety, the environment and traffic flow, as well as of the expected next ACC generations. What is ACC? Advanced Cruise Control (ACC), also known as adaptive, active or intelligent cruise control, is an addition to conventional cruise control systems.
    [Show full text]