CURRICULAM VITAE

Saurabh Kafaltiya

Address for Correspondence: Khatima, Uttarakhand Distt- U.S.Nagar Pin Code-262308

Nationality : Indian Marital Status : Unmarried

Mobile: +91 9045486381 Email: [email protected]

CAREER OBJECTIVE

Seeking a career in a creative environment with the leading corporate in an industry where my skills can be utilized effectively for organizational profitability as well as personal growth.

PROFILE SUMMARY

➢ Fe modeling for automotive and Industrial products. ➢ Fe modeling of BIW and plastic parts as per part functionality. ➢ Well versed with 1d connections, 2d shell mesh and 3d hex and tetra mesh. ➢ Good knowledge of material database. ➢ Well versed with quality check. ➢ Deck preparation for nonlinear static analysis. ➢ Sound knowledge of hyper view and hyper graph.

ACADEMIC BACKGROUND Qualification – Degree / Percentage / College Year(s) Diploma / Certificate Board CGPA / Institute/ University

M.Tech Central Deemed National Institute Of Technology, 2017-19 (Mechanical System 8.42 University(AICTE) Arunachal Pradesh Design) B.Tech Uttar Pradesh Technical 2010-14 Moradabad Institute Of Technology 69.98% (Mechanical Engg.) University(UPTU) All Senior Central Board of 2009 Secondary School Kendriya Vidyalaya 79% Secondary Education Examination All India Senior Central Board of 2007 Secondary School Nosegay Public School 83.5% Secondary Education Examination

TRAINING AND PROJECTS UNDERTAKEN

Summer Internship:

Company: Tata Motors, Rudrapur Duration: 4 week Project Title: Short Lead Time Description: This was my summer internship project performed in Tata Motors Pantnagar Assembly Shop 1C Department. The project dealt with the study of World Class Quality & to obtain World Class Quality what methods we can use i.e. Short Lead Time.

Bachelor’s Major Project:

Project Title: Design and Fabrication of Solar Air Heater integrated with Heat Pipes. Description: The project was taken under the guidance of Associate Prof. and dealt with the heating of air using solar energy and to obtain the efficiency of Solar Air Heater using various operation parameters.

Master’s Research Project:

Project Title: Experimental investigation, modeling and optimization of Wire EDM process parameters for machining AA2024/B4C composites. Description: The project was taken under the guidance of Assistant Prof. Shubhajit Das. In the present study AA2024+10wt. % B4C was considered a workpiece material. Four independent machining parameters of three levels each viz., pulse on time (Ton), pulse off time (Toff), peak current (Ip) and servo voltage (SV) were considered. Output parameters like surface roughness (Ra) and material removal rate (MRR) were considered for machining of MMC. Later on, modeling and optimization of the parameters were done.

Industrial visit:

➢ Industrial visit to NHPC & Tata Motors Rudrapur (Engine Division & Assembly Shop).

Seminar:

Seminar Title: Multi Point Fuel Injection (MPFI). Description: The Seminar dealt with the Fuel Injection System for admitting fuel into an IC Engine. This is the digital fuel injection system used in modern automobiles and is more advantageous than carburettor system.

Workshop: Attended one week workshop on following :

➢ “Recent trends on Optimization Techniques in Science and Engineering (ROTS-2018)” at NIT Silchar. ➢ “Mechatronics and Manufacturing Automation (MMA-2018)” at NIT Arunachal Pradesh. ➢ “Livelihoods and Development” in collaboration with Gandhi Smriti and Darshan Samiti (GSDS), New at NIT Arunachal Pradesh.

WORK EXPERIENCE

Techzilon Training Solutions: July 2019- Present Location: Bengaluru Role: CAE Project Trainee Working Tools: Hypermesh & Ansys Workbench Working Project: Dynamic Analysis of Forklift assembly during Load Lifting using FEA and Simulations.

CO-CURRICULAR ACTIVITIES

➢ Student Co-ordinator of MESS (Mechanical Engg. Student Society) at College. ➢ Active participant of UTTKARSH- MIT Cultural Fest. ➢ Won 2nd prize in Distt. Level Quiz Competition. ➢ Active Participant in Nationwide Biotechnology Olympiad & obtained 11th State Rank in it. ➢ GATE Qualified. ➢ Active coordinator of the one-week TEQIP-III sponsored workshop on Mechatronics & Manufacturing Automation (MMA-2018) at NIT Arunachal Pradesh.

COMPUTER SKILLS

Programming Languages:

➢ Basic C++ ➢ MATLAB Operating System & Packages:

➢ Windows 98, 2000, XP, Vista, 7, 8,10 ➢ Microsoft Office. ➢ MINITAB ➢ Altair Hyperworks.

Certification Courses: Master Diploma in Hypermesh and Ansys workbench.

PERSONAL DETAILS

Date of Birth : February 6, 1992 Category : General Gender : Male

Languages Read Write (Beginner/Proficient/ Speak (Beginner/Proficient/ Known (Beginner/Proficient/ Expert) Expert) Expert) English Proficient Proficient Proficient Proficient Proficient Proficient

Mobility : Comfortable in relocation anywhere in India and overseas

I declare that the details above are correct and true to the best of my knowledge.

Place: Bengaluru Date: 25-02-2020