UR5U-9000L and 9020L Cable Remote Control
Total Page:16
File Type:pdf, Size:1020Kb
th Introduction Button Functions A. Quick Set-Up Method C. Auto-Search Method E. AUX Function: Programming a 5 G. Programming Channel Control If your remote model has custom-program- 6 Quick Set-up Code Tables 7 Set-up Code Tables TV Operating Instructions For 1 4 STEP1 Turn on the device you want to program- Component mable Macro buttons available, they can be Manufacturer/Brand Set-Up Code Number STEP1 Turn on the Component you want to You can program the channel controls programmed to act as a 'Macro' or Favorite The PHAZR-5 UR5U-9000L & UR5U-9020L to program your TV, turn the TV on. TV CBL-CABLE Converters BRADFORD 043 program (TV, AUD, DVD or AUX). You can take advantage of the AUX func- (Channel Up, Channel Down, Last and Channel button in CABLE mode. This allows is designed to operate the CISCO / SA, STEP2 Point the remote at the TV and press tion to program a 5th Component such as a Numbers) from one Component to operate Quick Number Manufacturer/Brand Manufacturer/Brand Set-Up Code Number BROCKWOOD 116 STEP2 Press the [COMPONENT] button (TV, you to program up to five 2-digit channels, BROKSONIC 238 Pioneer, Pace Micro, Samsung and and hold TV key for 3 seconds. While second TV, AUD, DVD or Audio Component. in another Component mode. Default chan- 0 FUJITSU CISCO / SA 001 003 041 042 045 046 PHAZR-5 Holding the TV key, the TV LED will light AUD, DVD or AUX) to be programmed four 3-digit channels or three 4-digit channels BYDESIGN 031 032 Motorola digital set tops, Plus the majority th nel control settings on the remote control 1 SONY PIONEER 001 103 034 051 063 076 105 and [OK/SEL] button simultaneously STEP1 Turn on the 5 Component you want that can be accessed with one button press. CANDLE 116 002 003 363 of TV, AUD, DVD and AUX equipment on off and on again. Begin to press the PACE 001 005 002 for 3 seconds. The Component LED to program (TV, AUD, DVD or Audio). are as follows: 2 SAMSUNG CAPEHART 058 the market as shown below. number keys, one at a time, starting Press the [CBL] button to select the SAMSUNG 001 030 Cable Remote Control light will turn on for 30 seconds indi- STEP1 3LG CARY AUDIO DESIGN 266 with 1, then 2, 3...0 until the TV turns off. STEP2 Press the [AUX] button and the CBL : CBL T V : CBL AUD : AUD MOTOROLA 002 111 148 CABLE : Cable Converters TV : Televisions CBL mode. 4 TOSHIBA CELEBRITY 001 Release the TV key to save the code. cating the unit is ready to be pro- [OK/SEL] button simultaneously for DVD : DVD AUX :AUX DIGEO 153 STEP3 CENTURION 116 AUD : Audio Receivers DVD : DVD Players grammed. 3 seconds.The [AUX] Component STEP2 Press the [MACRO] button and 5 PANASONIC GENERAL INSTRUMENT 005 103 104 UR5U-9000L & UR5U-9020L The TV LED will blink twice to con- CETRONIC 043 AUX : Media PC, Gaming System, etc. LED will turn on for 30 seconds. If you wish to store the TV channel control [OK/SEL] button simultaneously for 3 6 PHILIPS HAMLIN 049 050 055 firm the code is stored. STEP3 Point the remote toward the CHANGHONG 247 in TV mode, use the following steps. seconds. The [CBL] button will turn 7 HITACHI HITACHI 103 055 Repeat these steps for your AUD, DVD, Component and press the [CH] or STEP3 Press the [COMPONENT] button CITIZEN 116 002 003 363 043 258 103 143 8 SHARP JERROLD 005 004 103 005 003 008 009 010 069 Replacing Batteries AUX, etc. [CH] button one step at a time or you want to setup. Point the remote STEP1 Press the [TV] button and the on for 30 seconds. CLARION 043 2 MAGNAVOX 010 012 control toward the Component and [OK/SEL] button simultaneously for 9 PHILIPS CLASSIC 043 B. Pre-Programmed 3-Digit Code Method keep it pressed. The remote will emit STEP3 Enter the the 2, 3 or 4-digit code for MEMOREX 052 Before you program or operate the remote control, a series of ON/OFF commands. enter the 3-digit code number 3 seconds. The [TV] Component the channel you want programmed CLP CLASSIC 333 you must install two new AA alkaline batteries. MOXI 111 252 153 STEP1 Turn on the Component you want to Release the [CH] or [CH] button assigned to your brand. LED will turn on for 30 seconds. first (for example, 007) using the NFUSION 192 COLORTYME 116 AUDIO CONCERTO 363 STEP1 Remove the battery compartment cover program (TV, AUD, DVD or AUX). as soon as the Component turns Off. *Note : If the 3-digit code number you just STEP2 Press the [VOL ] button. Number Pad, then press the [STOP] PANASONIC 044 047 on the back of your remote control. Quick Number Manufacturer/Brand PHILIPS 006 012 013 020 085 CONCIERGE 073 STEP2 Press the [COMPONENT] button (TV, STEP4 Test functions. (Same as for 3-Digit entered is the correct number, the button. Then enter the code for the CONTEC 043 050 051 AUD, DVD or AUX) to be pro- STEP3 Press the [TV] button again. 0 ROTEL PULSAR 052 STEP2 Check battery polarity carefully, and Code Programming Method - Component will turn Off. If it did The Component LED will blink next channel (for example, 050), then CORNEA 116 grammed and [OK/SEL] button simul- not turn Off, continue entering press the [STOP] button. Repeat this 1 DENON RCA 047 install the batteries as shown in the Section B). If any of the functions do twice to confirm the programming. REGAL 049 050 CORONADO 143 illustration below. taneously for 3 seconds. The not work as they should, repeat from code numbers listed for that brand process for the third channel. The 2 YAMAHA CRAIG 043 054 Component LED light will turn on for REGENCY 057 STEP 3 using [CH] or [CH] but- until the Component turns Off. To return to original state: [CBL] button will blink once for each 3 MARANTZ SKY 230 204 CROSLEY 164 STEP3 Replace the battery compartment cover. 30 seconds indicating the unit is 4 SONY CROWN 043 143 tons to find the correct code. STEP4 Test functions. (Same as for 3- channel entered. SONY 108 ready to be programmed. If you wish to restore the CABLE channel 5 INTEGRA CURTIS MATHES 116 258 363 143 Digit Code Programming Method - STEP4 Press the [CH] button to store the SPRUCER 047 STEP3 Point the remote control toward the STEP5 Save the code. (Same as for 3- control in TV mode, repeat the above steps 6 HARMAN KARDON TELNET 354 CXC 043 Digit Code Programming Method Section B). If any of the functions channels that were selected. The CYBERHOME 015 Component and enter the 3-digit do not work as they should, you but press [CBL] in STEP3 . 7 PIONEER TOCOM 039 040 056 code number assigned to your brand. - Section B). [CBL] button will blink twice to con- TOSHIBA 052 DAEWOO 363 016 043 044 076 103 114 125 127 need to find a new code. H. Programming Volume Control firm the storage of commands. 8 ONKYO 143 9 LEXICON VIEWSTAR 012 015 *Note : If the 3-digit code number you just Now, repeat the Auto-Search Method for STEP5 Once you have found the correct ZENITH 052 060 093 100 DAYTRON 363 143 entered is correct, the Component will those Components you could not program Volume and Mute control are factory-pro- To access the programmed channels, press DELL 320 164 363 3-digit code, save it by pressing the grammed to automatically transfer to the turn Off. If it did not turn Off, continue earlier with the Pre-Programmed Method. [AUX] button one more time. The the [MACRO] button once. This will bring up TV DIGITAL PROJECTION 570 entering code numbers listed for that respective Component mode you select, as the first channel. Press once again and it will DVD DIMENSIA 333 Component LED light will blink Manufacturer/Brand Set-Up Code Number brand until the Component turns Off. D. Finding a Component Button’s twice to confirm the code was follows: bring up the second channel. Press again and Quick Number Manufacturer/Brand DREAMVISION 235 DUKANE 011 025 STEP4 After you’ve entered the correct code Setup Code Number stored. Now when you press the it will bring up the third channel. 0 HITACHI A MARK 112 143 CBL : CBL T V :TV AUD : AUD ABEX 025 DUMONT 116 073 number and the Component has If you used the Auto-Search Method to pro- AUX button, all the buttons will DVD :TV AUX :AUX 1 SONY DURABRAND 096 052 th J. Low Battery Warning ACCURIAN 036 turned Off, press the [POWER] button gram a Component, you may not know work with that 5 Component. 2 PHILIPS DWIN 257 However, you can program the volume ADMIRAL 072 251 333 to turn the Component back On. Now what the correct code number is. Here is a 3 SAMSUNG DYNASTY 043 F. Programming the System On/Off Button controls (Volume Up, Volume Down and When the batteries are low and need to be ADVENT 247 388 it is time to test the VOLUME and way for you to identify the code number, so 4 PHILIPS MAGNAVOX ADVENTURA 002 DYNEX 400 Mute) from one Component to operate in replaced with fresh batteries, the Component MUTE buttons for the TV (or PLAY and you can record it for future reference. This allows you to program the System 5 PANASONIC AIKO 103 EIKI 187 STOP buttons for DVD) to make sure another Component.