4.1 Adhesives for wood and hardwood flooring

DUROSTICK D-100 Fast setting water resistant acrylic wood glue

PROPERTIES from hard or soft woods, such as beech, Fast setting and flexible white carpen- oak, walnut, oregon, rosewood, ma- try glue. It becomes crystal clear when hogany, and Swedish. dries. With excellent resistance to moisture. A specialty product for out- USE ΕΝ 204/205 door woodwork that is exposed to the 1. Surface preparation D3 elements. Created for long-term du- The application surface must be clean, rability in every woodworking appli- free from dust and loose paint. cation. The product is non flammable 2. Application and odorless, hypoallergenic as well Apply the glue as is, using brush or roll- as resistant to vibrations and impacts er, on both surfaces to be bonded. of woods. When the packaging bottle is used, cut Ideal for bonding large wooden sur- the nozzle at the required length, so faces on the heat press. Resistant to as to ensure regular flow of the adhe- 115°C for 130 minutes, without be- sive, and apply on both surfaces to be ing affected. It exceeds all D3 per EN bonded. 204/205 and D2F per EN 12004 Join within 10-15 minutes on the heat standards for bonding hard and soft press or secure the pieces with clamps woods with adhesion strength of 5.0 (pic.1) for 3-5 hours, depending on the N/mm². ambient humidity and temperature. TECHNICAL SPECIFICATIONS (Measurement conditions 23°C and 50% R.H.) The bonding is completed in 24 hours. Color White, becomes transparent when dry APPLICATIONS Density 1.05±0.05 kg/lt DUROSTICK D-100 is suitable for LIMITATION OF USE Solids by weight 50% w/w bonding outdoor and exposed to wa- It is not recommended to use the ad- Dilution with water Up to 5% ter wood structures like pergolas and hesive when the temperature is below Application temperature From +8°C to +35°C window frames. Bond securely oak +8°C. While the adhesive is still fresh, Temperature resistance when using heat press Up to 115°C for 130 minutes doors, even wood stairs (pic.2) and the temperature should not drop be- Adhesion strength 5.00 N/mm², per ΕΝ 1348 wood floors, while protecting the bond low + 4°C. Initial bonding 30-35 minutes from moisture. Use it also in shipbuilding and for all the Non flammable, odorless, friendly to human and the environment CLEANING interior woodwork. Suitable for bond- Remove any residue that might accu- ing cork and expanded or extruded pol- mulate using a wet cloth or a sponge ystyrene to concrete, wood and MDF as while the adhesive is still fresh. After well as plaster and brick. the application, clean all tools and any Distinguished for its advantages in fur- residues with water and clean hands niture building and construction made with warm water.

CONSUMPTION 200gr/m² STORAGE Store in places protected from frost in closed containers for at pic. 1 least 18 months from production date. SAFETY DIRECTIONS The product needs no hazard labeling under current European and National legislation. However, it is recommended to keep away from the reach of children. If swallowed, seek medical advice and show the container or label. PACKAGING Carton box with 15 bottles of 500gr each one 4kg container 150kg barrel 208 pic. 2