DOCSLIB.ORG

Shelf Life Product Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shelf Life Product Guide If you have any questions, please contact our Technical Support Team at 1-800-347-4583, Monday through Friday from 8 am to 6 pm EST. pm 6 to am 8 from Friday through Monday 1-800-347-4583, at Team Support Technical our contact please questions, any have you If all Titebond wood glues, adhesives and sealants. Please note that varying technologies within a product category may result in a longer (or shorter) shelf life. life. shelf shorter) (or longer a in result may category product a within technologies varying that note Please sealants. and adhesives glues, wood Titebond all of life shelf the for guide reference a as document this use Please designed. originally as perform still may it date, life shelf stated its past be may product a although and confusing, be sometimes can product a of life shelf The categories. product Titebond all of foundation the been always have practices marketing Ethical Reference Guide Reference PRODUCT SHELF LIFE SHELF PRODUCT CUSTOMER SERVICE 1.800.669.4583 TECHNICAL SERVICE 1.800.347.4583 Visit Titebond.com for the most up-to-date product information. Columbus, Ohio 43207 614.443.0241 Technical Service 1.800.347.4583 © 2020 01052_4954bcm FF876 12 18 24 48 MONTHS MONTHS MONTHS MONTHS Acoustical Smoke & Sound Sealant All Siding Sealant Blacktop Repair Sealant Concrete Repair Sealant DuraMaster Sealant Kitchen & Bath Sealant Painter’s Caulk Painter’s Plus Caulk Radon Sealant Roof Cement Sealant Roof Plus Sealant UA 920 Sealant WeatherMaster Sealant WeatherMaster Concrete Joint Sealant WeatherMaster Gutter & Seam Sealant WeatherMaster Metal Roof Sealant 20 oz Sausage Packs have a 48 Month Shelf Life. WeatherMaster Ultimate MP Sealant 20 oz Sausage Packs have a 48 Month Shelf Life. WeatherMaster X-Treme Fireblock Foam CAULKS AND SEALANTS AND CAULKS WeatherMaster X-Treme Multi-Purpose Foam WeatherMaster X-Treme Window & Door Foam 100% Silicone Sealant Cove Base Plus Adhesive Drywall Plus Adhesive GREENchoice Acoustical Ceiling Tile Adhesive GREENchoice Drywall Adhesive GREENchoice Fast Grab FRP Adhesive GREENchoice Heavy Duty Adhesive GREENchoice Projects Adhesive GREENchoice Subfloor Adhesive PROvantage Heavy Duty Adhesive PROvantage Landscape Adhesive PROvantage Subfloor Adhesive Solvent-Based All Purpose Adhesive Solvent-Based Drywall Adhesive Solvent-Based FRP Adhesive Solvent-Based Heavy Duty Adhesive Solvent-Based Landscape Adhesive Solvent-Based Subfloor Adhesive Ultimate Advanced Polymer Panel Adhesive 1/2 Gallon Pouches have a 24 Month Shelf Life Ultimate Fast Set Polyurethane Adhesive CONSTRUCTION ADHESIVES CONSTRUCTION Ultimate PVC Trim Adhesive & Sealant Ultimate TiteGrab Adhesive Carpet & Tile Solvent Free Indoor/Outdoor Adhesive Clear Pressure Sensitive Solvent Free Adhesive Concrete Primer Multi-Purpose Solvent Free Flooring Adhesive Tongue & Groove Flooring Glue Urethane Repair Kit Wood Flooring Tape 231 Select Acrylic Polymer Wood Flooring Adhesive 531 Moisture Control System 531 Plus Concrete Moisture Control System 670 Acrylic Polymer LVT Flooring Adhesive 675 Acrylic Polymer LVT Flooring Adhesive 720 Contractor Grade Multi-Purpose Adhesive 741 Choice Premium Wood Flooring Adhesive 771-Step Adhesive, Moisture & Sound Control 20 oz Sausage/Packs and 0.75 Gallon Pouches have a 24 Month Shelf Life. 780 Premium Multi-Purpose Flooring Adhesive 801 Preferred Urethane Wood Flooring Adhesive FLOORING PRODUCTS FLOORING 811 Advantage Wood Flooring Adhesive 20 oz Sausage/Packs and 0.75 Gallon Pouches have a 24 Month Shelf Life. 821-Step Urethane Wood Flooring Adhesive 920 Clear Thin-Spread Tile Adhesive 991 PROvantage Wood Flooring Adhesive All Purpose White Glue Cold Press for HPL Glue Cold Press for Veneer Glue Doweling Glue Doweling Glue LV Extend Wood Glue Instant Bond Accelerator Instant Bond Activator Instant Bond Wood Adhesive Gel Instant Bond Wood Adhesive Medium Instant Bond Wood Adhesive Thick Instant Bond Wood Adhesive Thin Liquid Hide Glue Melamine Glue Polyurethane Glue Quick & Thick Multi-Surface Glue Quickset 2000 Glue Super Titebond Glue Titebond Original Wood Glue Titebond II Dark Wood Glue Titebond II Extend Glue WOODWORKING GLUES WOODWORKING Titebond II Fluorescent Wood Glue Titebond II Premium Wood Glue Titebond Speed Set Wood Glue Titebond III Ultimate Wood Glue Translucent Glue White Glue If you have any questions, please contact our Technical Support Team at 1-800-347-4583, Monday through Friday from 8 am to 6 pm EST. pm 6 to am 8 from Friday through Monday 1-800-347-4583, at Team Support Technical our contact please questions, any have you If all Titebond wood glues, adhesives and sealants. Please note that varying technologies within a product category may result in a longer (or shorter) shelf life. life. shelf shorter) (or longer a in result may category product a within technologies varying that note Please sealants. and adhesives glues, wood Titebond all of life shelf the for guide reference a as document this use Please designed. originally as perform still may it date, life shelf stated its past be may product a although and confusing, be sometimes can product a of life shelf The categories. product Titebond all of foundation the been always have practices marketing Ethical Reference Guide Reference PRODUCT SHELF LIFE SHELF PRODUCT CUSTOMER SERVICE 1.800.669.4583 TECHNICAL SERVICE 1.800.347.4583 Visit Titebond.com for the most up-to-date product information. Columbus, Ohio 43207 614.443.0241 Technical Service 1.800.347.4583 © 2020 01052_4954bcm FF876.
Load more

Recommended publications
  • DAP® WELDWOOD® Wood Glue
    DAP® WELDWOOD® Wood Glue PRODUCT DESCRIPTION DAP® WELDWOOD Original Wood Glue is a professional grade premium glue that provides fast, strong bonds for most porous and semi-porous materials. PACKAGING COLOR UPC 4oz Bottle Yellow 7079800496 8oz Bottle Yellow 7079800497 16oz Bottle Yellow 7079800491 32oz Bottle Yellow 7079800492 1 Gallon Bottle Yellow 7079800498 KEY FEATURES & BENEFITS • Professional quality • Heat, water and solvent resistant • Sets fast and sands easily once dry PERFORMANCE CHARACTERISTICS • Resistant to oil, grease, and paint solvents • Sands well. • Does not dull cutting tools. • Especially resistant to shock and sharp impact when thoroughly set. SUGGESTED USES Ideal For Professional or DIY use. • Woodcraft • Furniture Manufacturing • Cabinet Making • Edge-Bonding and many other uses where a high- • Hobby & Craft Activities strength, long-lasting bond is required 08/2018 | www.dap.com APPLICATION Surface Preparation: • All surfaces to be glued must be clean, dry and free of all foreign material. • Temperature should be 55°F or above. Optimum temperature range is 70°F to 80°F. • Wood requires no special preliminary treatment; however, the most efficient bonds develop when the wood has been resurfaced just prior to applying glue. • Moisture content of wood may run as high as 15% but best bonds are obtained when moisture content ranges between 8% and 12%. Application: • FURNITURE JOINT GLUING: Wood surfaces should be smooth and snug fitting. Avoid excessive sanding or handling of joint surfaces. Spread glue evenly onto surfaces, assemble within 5 to 7 minutes and clamp if possible. Clamp or weight for a minimum of 30 minutes. Allow to dry overnight before sanding and handling.
    [Show full text]
  • Rattlesnake Instr. Manual
    INSTRUCTION MANUAL Rattlesnake MASSACHUSETTS PRIVATEER Technical Characteristics Scale: 3/16” = 1’ 0” (1: 64) Overall Length: 28” Overall Width: 9” Overall Height: 18” Hull Width: 4-1/4" MODEL SHIPWAYS KIT NO. MS2028 Instruction Manual Massachusetts Privateer Rattlesnake 1780 By George F. Campbell, 1963 Plank-On-Bulkhead Construction and Manual By Ben Lankford, 1994 Model built by Bob Bruetsch The Model Shipways Hull and Rigging plans for Rattlesnake were prepared in 1963 by Mr. George F. Campbell, who passed away several years ago. Mr. Campbell was a noted British marine artist, author, naval architect, and historian. He was a member of the Royal Institution of Naval Architects. One of his most noteworthy publications is China Tea Clippers. He also developed the drawings for the Cutty Sark restoration in England and authored Model Shipways' model handbook, Neophyte Shipmodeler's Jackstay. The Model Shipways plans prepared by Mr. Campbell are based on Admiralty draughts and a reconstruction originally published by Howard I. Chapelle in his book, The History of American Sailing Ships, and also The Search for Speed Under Sail. The rig- ging and deck equipment is based on contemporary texts. The Model Shipways kit of Rattlesnake initially offered a solid hull model. This kit has now been converted to a Plank-On-Bulkhead type hull. The P-O-B hull plans were prepared in 1994 by Ben Lankford along with this complete new instruction manual. Copyright 1994 Model Shipways Sold & Distributed by Model Expo, a Division of Model Shipways, Inc. Hollywood, FL • www.modelexpo-online.com 2 Brief History It was supposedly in 1781 that Rattlesnake was built as a privateer at Plymouth, Massachusetts for a Salem syndicate; John Andrews, and oth- ers.
    [Show full text]
  • Finishing and Polishing Marquetry
    QJS Marquetry 111111 Finishing and Polishing Marquetry Introduction Once you have completed cutting your marquetry it ideally needs sticking down, sanding and polishing to give it a smooth, durable finish and bring out the best of the colours of the veneers. Polishing alone is a complex subject, with many books devoted to single methods, such as French polishing, so this can only be a brief overview. In general, if you have a method with which you care comfortable then that is the one to use! A Simple Cheat! One easy way to display your marquetry is simply to frame it under glass. With time the glue may go brittle, so ensure the back is well taped to hold everything together – even then the adhesive on the tape may deteriorate. Another option, which can work in some cases, is to laminate the marquetry or cover it with self-adhesive "library film". These really are not viable long-term methods, but may suit small items, such as decorations on cards etc. where a quick result is required. Much better is to stick the work to a suitable substrate and then sand and polish it. -------------------------------------------------------------------------------------------------------------- Choice of Substrate The ideal substrate (backing) for your work is one which is easy to work and has good stability against warping etc. The simplest, commonly available, material is medium density fibreboard – MDF. This comes in a range of thicknesses – 2 or 3mm is good for jewellery, Christmas decorations or small pictures which are to be framed. 6 and 9 mm is good for larger pictures and box construction.
    [Show full text]
  • Aim 1000 Professional Carpenter's White Wood Glue
    H.B. Fuller Construction Products Inc. 1105 South Frontenac Street • Aurora, IL 60504 800.552.6225 • Fax: 800.952.2368 aim-adhesive.com Aim 1000 Professional Carpenter’s White Wood Glue • Professional Quality • Heat, Water, and Solvent Resistant • Sets Fast and Sands Easily Once Dry Product Description Aim 1000 Professional Carpenter’s White Wood Glue is a professional grade, polymer emulsion for applications that require a wood adhesive that meets U.S. Type 2 water resistance standards. Properties Excellent water resistance; very good heat resistance; good resistance to static load; and very fast setting speed. Shows strong adhesion to porous and cellulosic surfaces like paper, wood, and cloth. Provides tough films that have outstanding water resistance when cured. Suggested Uses Ideal for: Composite panel Panel-on-Frame Construction Edge Gluing Finger Jointing Furniture Parts Assembly Wood Craft Cabinet Making Hobby and Craft Activities Bonds: Plastic Laminates to Wood, Plywood, and Hardboard Porous and Semi-Porous Leather and similar materials to themselves or wood, hardwood, cloth, or cardboard bases Performance Characteristics • Sets fast and sands easily once dry • Excellent water resistance • Very good heat resistance • Good resistance to static load For Best Results All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish, or other foreign material before gluing. Work glue into the pores of both wood surfaces. Apply sufficient glue to result in squeeze out when parts are assembled. On rough or uneven cuts, a double application may be necessary. Spread thinly for fabrics, canvas, paper, etc. Use heavier spread for wood joints.
    [Show full text]
  • Inspection of Wooden Vessels
    Guidance on Inspection, Repair, and Maintenance of Wooden Hulls ENCLOSURE (1) TO NVIC 7-95 COMPILED BY THE JOINT INDUSTRY/COAST GUARD WOODEN BOAT INSPECTION WORKING GROUP August 1995 TABLE OF CONTENTS ACKNOWLEDGEMENTS A-1 LIST OF FIGURES F-1 GLOSSARY G-1 CHAPTER 1. DESIGN CONSIDERATIONS A. Introduction 1-1 B. Acceptable Classification Society Rules 1-1 C. Good Marine Practice 1-1 CHAPTER 2. PLAN SUBMITTAL GUIDE A. Introduction 2-1 B. Plan Review 2-1 C. Other Classification Society Rules and Standards 2-1 D. The Five Year Rule 2-1 CHAPTER 3. MATERIALS A. Shipbuilding Wood 3-1 B. Bending Woods 3-1 C. Plywood. 3-2 D. Wood Defects 3-3 E. Mechanical Fastenings; Materials 3-3 F. Screw Fastenings 3-4 G. Nail Fastenings 3-5 H. Boat Spikes and Drift Bolts 3-6 I. Bolting Groups 3-7 J. Adhesives 3-7 K. Wood Preservatives 3-8 CHAPTER 4. GUIDE TO INSPECTION A. General 4-1 B. What to Look For 4-1 C. Structural Problems 4-1 D. Condition of Vessel for Inspection 4-1 E. Visual Inspection 4-2 F. Inspection for Decay and Wood Borers 4-2 G. Corrosion & Cathodic Protection 4-6 H. Bonding Systems 4-10 I. Painting Galvanic Cells 4-11 J. Crevice Corrosion 4-12 K. Inspection of Fastenings 4-12 L. Inspection of Caulking 4-13 M. Inspection of Fittings 4-14 N. Hull Damage 4-15 O. Deficiencies 4-15 CHAPTER 5. REPAIRS A. General 5-1 B. Planking Repair and Notes on Joints in Fore and 5-1 Aft Planking C.
    [Show full text]
  • United States Patent [19] [11] Patent Number: 6,033,754 Cooke [45] Date of Patent: Mar
    US006033754A United States Patent [19] [11] Patent Number: 6,033,754 Cooke [45] Date of Patent: Mar. 7, 2000 [54] REINFORCED LAMINATED VENEER 5,641,553 6/1997 Tingley ................................. .. 572/103 LUMBER 5,721,036 2/1998 Tingley ..... .. 428/96 5,725,929 3/1998 Cooke et al. 428/106 [75] IHVGHIOII Leslle Cooke, Eugene, Oreg- 5,747,151 5/1998 Tingley .............................. .. 428/299.1 [73] Assignee: Fiber Technologies, Inc., Drain, Oreg. FOREIGN PATENT DOCUMENTS [21] APPI- NO-I 09/270,630 2588507 4/1987 France ......................... .. B32B 21/13 [22] Filed; Mar. 17, 1999 Related US Application Data Primary Examiner—Terrel Morris Assistant Examiner—Ula Ruddock [63] Continuation-in-part of application No. 08/700,144, Aug. Attorney, Agent, or Firm—Fasth LaW Offices; Rolf Fasth 20, 1996, Pat. NO. 5,725,929. [51] Int. Cl.7 .................................................... .. B32B 21/13 [57] ABSTRACT [52] US. Cl. ........................ .. 428/106; 428/114; 428/119; The reinforced laminated Veneer lumber of the present 442/1 invention includes an engineered fabric that is disposed [58] Field of Search ................................ .. 428/106; 442/1 between the veneer sheets to provide added reinforcement [56] References Cited and enables the use of loWer grade veneer sheets for struc tural applications. U.S. PATENT DOCUMENTS 4,743,484 5/1988 Robbins ................................ .. 428/106 5 Claims, 2 Drawing Sheets U.S. Patent Mar. 7, 2000 Sheet 1 0f 2 6,033,754 U.S. Patent Mar. 7, 2000 6,033,754 6,033,754 1 2 REINFORCED LAMINATED VENEER quality veneer sheets are used partly due to the novel LUMBER employment of reinforcements.
    [Show full text]
  • Bonding of Plywood
    Vol. 62, 2016 (4): 198–204 Res. Agr. Eng. doi: 10.17221/39/2015-RAE Bonding of plywood M. Brožek Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic Abstract Brožek M. (2016): Bonding of plywood. Res. Agr. Eng., 62: 198–204. The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard ČSN EN 1465 (66 8510):2009. The spruce three-ply wood of 4 mm thickness was used for bonding according to ČSN EN 636 (49 2419):2013. The test samples of 100 × 25 mm size were cut out from a semi-product of 2,440 × 1,220 mm size in the direction of its longer side (angle 0°), in the oblique direction (angle 45°) and in the direction of its shorter side (crosswise – angle 90°). The bonding was carried out using eight different domestic as well as foreign adhe- sives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing, the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally, the technical-economical evaluation of the experiments was carried out. Keywords: adhesive; spruce three-ply wood; bonded joints testing; cost of bonding An increase in a technical level in the field of plement of the above-mentioned methods, not as bonding of classic as well of modern materials led in their substitution.
    [Show full text]
  • Woodworking Guide: Wood Glue
    WOODWORKING GUIDE: WOOD GLUE Understanding different types of glue. If there's one material, besides wood, that's central to furniture making, it's wood glue. Since ancient times, glue has been used to assemble furniture and it's not difficult to see glued pieces that are hundreds of years old. Just take a trip to an art museum and look at furniture from ancient Egypt or the European Renaissance. While the purpose of glue hasn't changed over the years, the technology certainly has. Now there are any number of specialty glues designed for all sorts of different applications. Fortunately, only a few play an important role in furniture making. Hide Glue, Epoxies And Polyurethanes The earliest glues were hide glues and these are still in use today. Hide glue is made from animal products and it's extremely useful for projects, like musical instruments, that often require disassembly to make repairs. Because heat and humidity cause hide glue to release its bond, it's a relatively simple matter to separate pieces without damaging them. Hide glue also cures slowly, so it can be a good option for difficult joints or constructions that take a long time to assemble. However, the goal of most furniture work is to create something that can withstand exposure to just these elements, heat and humidity. Fortunately, today's furniture maker has other options. Two-part epoxies are probably the most durable of all adhesives. For situations where extreme water resistance is required, epoxy is the best choice. Unfortunately, it's pretty difficult and messy to use.
    [Show full text]
  • Woodworking Joints.Key
    Woodworking making joints Using Joints Basic Butt Joint The butt joint is the most basic woodworking joint. Commonly used when framing walls in conventional, stick-framed homes, this joint relies on mechanical fasteners to hold the two pieces of stock in place. Learn how to build a proper butt joint, and when to use it on your woodworking projects. Basic Butt Joint The simplest of joints is a butt joint - so called because one piece of stock is butted up against another, then fixed in place, most commonly with nails or screws. The addition of glue will add some strength, but the joint relies primarily upon its mechanical fixings. ! These joints can be used in making simple boxes or frames, providing that there will not be too much stress on the joint, or that the materials used will take nails or screws reliably. Butt joints are probably strongest when fixed using glued dowels. Mitered Butt Joint ! A mitered butt joint is basically the same as a basic butt joint, except that the two boards are joined at an angle (instead of square to one another). The advantage is that the mitered butt joint will not show any end grain, and as such is a bit more aesthetically pleasing. Learn how to create a clean mitered butt joint. Mitered Butt Joint The simplest joint that requires any form of cutting is a miter joint - in effect this is an angled butt joint, usually relying on glue alone to construct it. It requires accurate 45° cutting, however, if the perfect 90° corner is to result.
    [Show full text]
  • An Abstract of the Thesis Of
    AN ABSTRACT OF THE DESERTATION OF Edward A. Le for the degree of Doctor of Philosophy in Wood Science and Materials Science presented on May 14, 2010. Title: Numerical Modeling and Experiments on Wood-Strand Composites. Abstract approved: _________________________________ ________________________________ John A. Nairn William H. Warnes In wood-based composites, the glue-line (interface) between wood-strands affects the stress transfer from one member to the next. The glue-line properties determine the rate of load transfer between phases and these properties depend on wood species, surface preparation, glue properties, glue penetration into wood cells, and moisture content of the wood. As a result, the strength and stiffness of the composites are significantly affected by the amount, distribution, and properties of the resin. In the first part of this research, the glue-line stiffness between wood strands was determined by experiments. The interfacial properties were calculated from experimental data on double lap shear (DLS) specimens. The results showed that in both normal and densified wood strands, resin coverage has a positive effect on the interfacial stiffness, and consequently on stiffness properties of wood-based composites. As adhesive coverage increased from discrete droplets (1% coverage) to a continuous bondline (100% or fully glued) the stiffness of the interface increased significantly and could even become stiffer than the wood itself. In the second part of this research, once the mechanical properties of individual strands and interfacial properties were determined by experiment, they were used as input to a numerical model for the mechanical properties of oriented strand board (OSB) panels. Modeling the compression of wood-strands and wood-based composites was done using a numerical method called the material point method (MPM).
    [Show full text]
  • Loctite® Express Wood Glue
    Technical Data Sheet Revision: July 2, 2020 Supersedes: New Ref. #: 421105 Loctite® Express Wood Glue DESCRIPTION: Loctite® Express Wood Glue is a ready-to-use, multi-purpose, high tack, polyvinyl acetate woodworking glue (“aliphatic resin” glue). It offers a tough, high strength, humidity resistant bond that dries in only 10 minutes. The fast drying makes it ideal for complex, multi-piece wood assemblies. This makes it work great for projects like cabinet making, carpentry work, furniture and general wood gluing projects. Once cured the adhesive is a translucent yellow color that is Sandable, paintable, and contains no urea formaldehyde. Available As: Item # Package Size Color 2576067 Plastic bottle 4 fl. oz. (118.29 mL) Yellow FEATURES & BENEFITS: • Dries in 10 minutes, quick drying wood glue • High bond strength, up to 3500 psi • Dries translucent yellow • Sandable for easy removal once cured • Paintable and unaffected by finishes RECOMMENDED FOR: An interior wood glue for making tight fitting joints required in quality cabinet making, carpentry work, furniture and general wood gluing. Bonds porous substrates such as wood, wood compositions, veneer, cardboard, leather and cork. LIMITATIONS: • Joints that require gap filling • Bonding two non-porous substrates. (e.g. plastic or metal) • Applications that will be subject to direct water contact unless sealed and maintained with a waterproof coating prior to contact • Structural applications (e.g. Load bearing applications in building construction) • Storage in metal containers COVERAGE 14 fl. oz. (118.29 mL): Approximately 1.24 ft2/fl. oz. (.0038 m2/mL) per surface @ 0.010 inches (10 mils) wet. Loctite® Express Wood Glue Page 1 of 3 Technical Data Sheet Revision: July 2, 2020 Supersedes: New Ref.
    [Show full text]
  • Polyurethane Wood Glue
    TECHNICAL DATA SHEET Polyurethane Wood Glue Description: LePage Polyurethane Glue is a revolutionary high strength adhesive that bonds wood to wood and virtually anything else. It expands deep into material, providing very tough, weather and waterproof bonds. Available As: Item # Size Package Color 1980354 200 ml Plastic Bottle Natural Wood Features & Benefits: Bonds to Virtually Anything Super Strong 100% Waterproof Interior/Exterior Sandable Paintable Recommended For: LePage Polyurethane Wood Glue is suitable for bonding virtually all materials including wood, stone, metal, ceramic, glass, foam and more. Limitations: Not recommended for continuous water immersion Do not over apply Not recommended for pressure treated wood impregnated with paraffin LePage® Polyurethane Wood Glue Page 1 of 3 TECHNICAL DATA SHEET Typical Uncured Color: Light amber Physical Properties: Appearance: Liquid Base: Polyurethane Odor: Characteristic Specific Gravity: 1.10 Flashpoint: >110°C (230°F) Viscosity: 4,000 to 6,500 cps VOC Content: 0% CARB 0 g/L SCAQMD Shelf Life: 12 months from date of manufacture (unopened) Lot Code Explanation: YYDDD YY= Last two digits of year of manufacture DDD= Day of manufacture based on 365 days in a year Example: 15143 = 143rd day of 2015 = May 23, 2015 Typical Application Application Temperature: Apply between 16°C (60°F) and 35°C (95°F) Properties: Open Time: 5 minutes* Clamping Time: 1 to 2 hours* Cure Time: 24 hours* *Times are dependent on temperature, humidity and porosity of materials Typical Cured Color: Light
    [Show full text]