Protective Clothing for Utilities

Home , Modacrylic

Hard Working Gear for Hard Working People.

800-645-9291 • www.lakeland.com • [email protected]

Protect Your People™ Protect Your People™

Breathable Mesh Arc Rated Vests

Class 2

Breakaway Shoulder A B C

Adjustable Snap Sides

A. Style V-8AM0112VL B. Style V-8AM0312ZL C. Style V-8AM1412VL Basic Class 2 Vest Non-conductive Zipper Closure 5 Point Breakaway Modacrylic mesh with modacrylic binding Modacrylic mesh with modacrylic binding Modacrylic mesh with modacrylic binding • Meets ANSI 107-2010, Class 2 specifications • Non-conductive zipper front closure • 5 point breakaways at shoulders, adjustable sides, and • 2” Silver heat transferred trim • Open-sides with adjustable snap closures front closure • Hook & loop front closure • 2” Silver heat transferred trim • Hook and Loop front closure • 27” length. • Meets ANSI 107-2010, Class 2 specifications • 2” Silver heat transferred trim Sizes: M-6XL • 27” length. • Meets ANSI 107-2010, Class 2 specifications Color: Lime Yellow Sizes: S/M, L/XL, 2/3XL, 4/5XL • 24” length. Option: 24” length V-8AM1512ZL Sizes: S/M, L/XL, 2/3XL, 4/5XL Color: Lime Yellow Color: Lime Yellow

Breathable Mesh Arc Rated Air Flow: 490 CFM Vests Test Data ATPV = 5.1 cal/cm2, HRC Level 1 Testing: ASTM F1506, NFPA 70E All modacrylic vests are sewn with Nomex® thread. PROTECTIVE CLOTHING FOR UTILITIES

Class 3

D E D. Style V-8AM0142VL E. Style V-8AM0113VL High Contrast Trim and Basic Class 3 Vest Binding Modacrylic mesh with modacrylic Modacrylic mesh with orange binding modacrylic binding • ANSI 107-2010, Class 3 • Orange 4” modacrylic contrast • 2” Silver heat transferred trim behind silver trim • Hook & loop front closure • 2” Silver heat transferred trim • 27” length. • Meets ANSI 107-2010, Class 2 Sizes: M-6XL specifications Color: Lime Yellow • Hook & loop front closure • 27” length. • Optional lanyard port Sizes: M-6XL, Color: Lime Yellow with contrast Our Lanyard Ports Won’t Rip! Lakeland Reinforces our lanyard ports for extra tough durability.

Lanyard Port Adjustable Sides F F. Style V-8AM0322VL G. Style V-8AM0223VL Adjustable Snap Sides Plus Class 3 Vest with High Contrast Binding! Lanyard Port Modacrylic mesh with orange Modacrylic mesh with orange modacrylic binding modacrylic binding • Open-sides with adjustable snap • Reinforced lanyard port. closures • Meets ANSI 107-2010, Class 3 • 2” Silver heat transferred trim specifications • Meets ANSI 107-2010, Class 2 • Open-sides with adjustable hook specifications & loop • Hook and loop closure • 2” Silver heat transferred trim • 27” length. • Hook & loop front closure Sizes: S/M, L/XL, 2/3XL, 4/5XL • 27” length. Color: Lime Yellow with contrast Sizes: S/M, L/XL, 2/3XL, 4/5XL Adjustable Colors: Lime Yellow with contrast Snap Sides

800-645-9291 • www.lakeland.com • [email protected] 1 Protect Your People™

Woven Arc Rated Vests • Anti-static 10mm Carbon Grid

A. Style V-10A0312ZL Non-conductive Zipper Closure Modacrylic blend with modacrylic binding • Open-sides with adjustable snap closures • Anti-static 10mm carbon grid • Non-conductive zipper front closure. A B • 2” Silver heat transferred trim • Meets ANSI 107-2010, Class 2 specifications • 27” length Sizes: S/M, L/XL, 2XL/3XL, 4XL/5XL Colors: Lime/Yellow

B. Style V-10A0112ZL Anti-static 10mm Carbon Grid Modacrylic blend with modacrylic binding • Anti-static 10mm carbon grid • Non-conductive zipper front closure. • 2” Silver heat transferred trim • Meets ANSI 107-2010, Class 2 specifications • 27” length Sizes: M-6XL Adjustable Color: Lime/Yellow Snap Sides C. Style V-10A1723ZL Adjustable Snaps on Sides and Sleeves Modacrylic blend with orange modacrylic binding 10A Fabric • Static Dissipative 10mm carbon grid • Adjustable open-sides with snaps 10A Fabric utilizes a carbon core fiber used • Adjustable snap sleeves in a new static dissipative vest material • 2” Silver heat transferred trim C developed by Performance Textiles and Glen • Meets ANSI 107-2010, Class 3 specifications Raven Technical Fabrics LLC. The concern for • Non- conductive zipper front closure static build-up in garments used in natural • 27” length gas transmission as well as exploration, Sizes: S/M, L/XL, 2X/3X, 4X/5X drilling and transportation, lead to this Color: Lime/Yellow with contrast carbon blended material. Documentation of the static -dissipative claim was achieved using the Gas Probe Test, Shirley Method Woven Arc Rated Vests Test 138-2000 and the Static Decay Test; Method Data 191A and 5931. Both tests are similar and ATPV= 6.3 cal/cm2, HRC level 1 require 50 specimen sample sizes. Fabric is Testing: ASTM F1506, NFPA 70E, Gas charged to 4000 volts during a 20 second Probe test charging period. The acceptable decay to • Shirley method 138-2000 – Pass 10% of the maximum voltage is less than 0.5 • Static Decay Test, methods 191A seconds. All 50 specimens must pass. and 5931 Adjustable Snap Sides

2 800-645-9291 • www.lakeland.com • [email protected] PROTECTIVE CLOTHING FOR UTILITIES

Woven Arc Rated Vests • Mesh Carbon Grid Static Dissipative

A B C

A. Style V-10AM2023ZL B. Style V-10AM0322ZL C. Style V-10AM0122ZL Class 3 Vest with Lanyard Port Non-conductive Zipper Closure Basic Class 2 Vest Modacrylic mesh with modacrylic orange binding Modacrylic mesh with orange modacrylic binding Modacrylic mesh with orange modacrylic binding • Meets ANSI 107-2010, Class 3 specifications • Non-conductive zipper front closure • Non-conductive zipper front closure • 2” Silver heat transferred trim • Open-sides with adjustable snap closures • 2” Silver heat transferred trim • Non-conductive zipper front closure • 2” Silver heat transferred trim • Meets ANSI 107-2010, Class 2 specifications • Reinforced lanyard port • Meets ANSI 107-2010, Class 2 specifications • 27” length. • 27” length. • 27” length. Sizes: M-6XL Sizes: M-6XL Sizes: S/M, L/XL, 2/3XL, 4/5XL Color: Lime Yellow with contrast binding Color: Lime Yellow with contrast binding Option: 24” length V-10AM1512ZL Color: Lime Yellow with contrast binding

Breathable Mesh Arc Rated Air Flow: 490 CFM Vests Test Data ATPV = 5.1 cal/cm2, HRC Level 1 Testing: ASTM F1506, NFPA 70E All modacrylic vests are sewn with Nomex® thread.

800-645-9291 • www.lakeland.com • [email protected] 3 Protect Your People™ PROTECTIVE CLOTHING FOR UTILITIES

Durable Woven Vests

A. V-8A0112VL - Lime Yellow A Durable Woven Vests V-8A0112VO - Orange Test Data Class 2 Hook and Loop Closure ATPV = 5.5 cal/cm², HRC Level 1 Modacrylic woven with modacrylic binding Testing: ASTM F1506, NFPA 70E • Hook and loop front closure • Meets ANSI 107-2010, Class 2 specifications • 2” Silver heat transferred trim • 27” length. Sizes: M – 6X Color: Lime Yellow – V-8A0112VL Orange – V-8A0112VO

B C

Adjustable Sides

Need A Radio Pocket?

B. V-8A0113VL C. V-8A0222VL Class 3 Vest with Sleeves Adjustable Hook and Loop Sides! Hook and Loop Closure Modacrylic woven with orange modacrylic binding Modacrylic woven with modacrylic binding • Open-sides with adjustable hook and loop Pocket Options • 2” Silver heat transferred trim • Hook and loop front closure Pockets Dimensions • Meets ANSI 107-2010, Class 2 specifications • ANSI 107-2010, Class 3 #45 4” x 5” radio pocket with strap • 2” Silver heat transferred trim • Hook & loop front closure #55 5” x 5” • 27” length. • Length 27”. #67 6” x 7” Sizes: M-6XL Sizes: S/M, L/XL, 2/3XL, 4/5XL #21 6” x 5” inside/tablet pocket with Color: Lime Yellow Color: Lime/Yellow with contrast 5” x 5”, 3 pencil slots referred to as a 2 in 1 pocket.

4 800-645-9291 • www.lakeland.com • [email protected] PROTECTIVE CLOTHING FOR UTILITIES

Knit Blend Arc Rated Specification

A A. Style S-FRJ0653L B Class 3 Shirt with Segmented Trim! 3012 Modacrylic Jersey knit shirt • Cotton plated inside • Henley style, 3 button front, long sleeve • Meets ANSI 107-2010, Class 3 specifications • 3M Comfort segmented trim Sizes: M-6XL Color: Lime/Yellow Also available with solid silver trim, Style S-FRJ0613L

B. Style T-FRJ0513L Crew Neck Class 3 Knit Shirt 3012 Modacrylic Jersey knit • Long sleeves • Cotton plated inside • Crew ribbed collar • Meets ANSI 107-2010, Class 3 specifications • 2” Silver heat transferred trim Sizes: M-6XL Color: Lime/Yellow

C. Style T-FRJ0713L Crew Neck Class 3 Tee Shirt • 3012 Modacrylic Jersey Knit Segmented Trim is lighter in • Short sleeves weight, and more breathable than solid reflective trim. All • Cotton plated inside C those little diagonal spaces add • Crew ribbed collar up to more comfort for you! • 2” silver heat transferred trim • Meets ANSI 107-2010, Class 3 specifications Sizes: M-6XL Color: Lime/Yellow

Knit Blend Arc Rated Test Data EBT = 10 cal/cm2, HRC Level 2 Testing: ASTM F1506, NFPA 70 E

800-645-9291 • www.lakeland.com • [email protected] 5 Protect Your People™

FR Woven Coveralls and Vests

A B Breakaway Shoulder C

B. Style V-7AFR0412VL C. Nomex® IIIA Coveralls 5 Point Breakaway HRC Level 2 Vest HRC 1 Protection Twill Vest with Modacrylic binding CO10 – 4.5 ounce Nomex® IIIA coveralls. Available in • Fiber blend of PPAN FR, Cellulosic and Para-Aramid Khaki ,Navy, Orange. • Meets ANSI 107-2010, Class 2 specifications CO20 – 6.0 ounce Nomex® IIIA coveralls. Available in • Public Safety Style 5 point breakaway vest Navy and Orange. • Open-sides with adjustable hook & loop • Two patch breast pockets, left chest pocket has a • Radio pocket pen slot • Mic tabs • Heavy duty, two-way quick release brass zipper with FR • 2” Silver heat transferred trim zipper tape A. Style TSP010L Coverall • 27” length. • Heavy duty snaps covered internally Coverall with Zippered Boot Openings ATPV = 8.4 cal/cm2, HRC Level 2 • Two hip pockets with a snap closure on the left hip Testing: ASTM F1506, NFPA 70E pocket Twill jumpsuit Sizes: Size R fits M-2XL ; size O fits 3XL-5XL • Nomex Ripstop side pass-through pockets • TecaSafe® Plus material Color: Lime/Yellow • Pleated bi-swing back with elasticized waistband • Meets ANSI 107-2010, Class 3 specifications • Utility pocket on right leg • Chest, seat and swing pockets • Adjustable sleeve cuffs • 2” silver heat transferred trim • Sewn throughout with Nomex® thread • Zipper front closure • Exact chest sizes for a precise fit • Adjustable wrists Ratings • 16” zippered boot openings. 4.5 oz. HRC 1, ATPV 4.6 ATPV = 8.4 cal/cm², HRC Level 2 6.0 oz. HRC 1, ATPV 5.7 Testing: ASTM F1506, NFPA 70E, NFPA 2112 Certified Meets the performance requirements of NFPA 70E Current Sizes: Small- 6XL Edition and ASTM F1506. Acceptable for use in occupations Color: Lime Yellow covered by OSHA Final Rule 1910.269 NFPA 2112 Certified

6 800-645-9291 • www.lakeland.com • [email protected] FR / ARC RATED / WATERPROOF / RAIN WEAR PROTECTIVE CLOTHING FOR UTILITIES

FR/ARC Rated Rainwear

Lakeland ARC TECH® Premium Quality Polyurethane FR/ARC Rated Rainwear ANSI Certified ASTM Arc and Flash Fire Rated for Electric and Gas Applications Jacket Style No: AJPU10LY Compare the workmanship, features, and at- Bib Pant Style No: ABPU10LYZ tention to detail: you won’t find an equal. And you have the assurance of PU offers Superior Performance Lakeland-made quality – we don’t use contrac- vs. PVC: tors. More Comfortable Certification: • Cooler: Breathes and releases perspira- Jacket: ANSI 107-2010 Class 3 tion Bib Overall: ANSI 107-2010 Class E • Softer and more flexible ASTM F1891 • ASTM F2733 • ASTM F903 • Lighter weight More Durable for Longer Wear Cycle • Softness and pliability make it less prone FR/Arc Rainsuit Test Data to get caught on branches and brush Fabric information: 10.0 oz.² Polyure- • Superior puncture, tear and abrasion thane over FR cotton knit resistance Arc Rating: 16.3 Cal/cm2 • Reinforced HF welded/sealed seams for HRC Level: 2 maximum strength Ebtas: 21.9 Cal/cm2 • Innovative DRP™ Diamond Reinforced HAF: 84% Patch to prevent crotch “blow out” MVTR: 305G/M²/24H • Saves money in the long run Total % body burn: 12.30% 3rd degree burn: 6.55%

Jacket and Pant 3” internal anti- Reinforced lanyard Over-size jacket Jacket collar with garment seams wicking dam on opening hood with self stowing hood are stitched and HF bottom of jacket adjustable storage sealed to prevent and pants to draw string fits liquid penetration prevent internal comfortably over a moisture migration hard hat

Leg Zippers for Easy On and Off! Ventilated jacket Innovative Zipper front closure Leg zipper for Non-metallic quick back DRP™ Diamond with hook and loop easy donning and release bib pant Reinforced Patch storm flap prevents doffing over boots strap clips to prevent crotch liquids from and work shoes. “blow out” sneaking in

800-645-9291 • www.lakeland.com • [email protected] 7 Protect Your People™

FR Clothing

A B C

A. Style Flame Resistant (FR) Shirts B. Style IJKBD10 Brown Duck C. Style AR51SC-18L Two Layer Coat and Pants with Everyday Work Comfort Industrial Jacket 13 oz. Indura® Ultra Soft® Outer Layer Built In! 10.0 oz.88/12 FR cotton Brown Duck 9 oz. Indura® Ultra Soft® Inner Layer Liner: - 9 oz. FR cotton batting quilted to 7.7 oz. pre-shrunk Velcro® front closure ISH7 – Khaki Industrial Shirt FR cotton with a polyurethane wind barrier. Knit wristlets seal around wrists Features include: 7 oz 88/12. 88% cotton/12% nylon mate- Stand up collar rial, button down collar, button front closure, 2 ply yoke with • Corduroy collar Raglan sleeve design offers superior freedom of movement placket front, two chest pockets with button flap closure, • Non-metallic heat/FR resistant zipper 32” length for full coverage • Bi-swing pleated back left pocket with pen slot, long rounded tail, long sleeve with ATPV= 5.1 oz. 88/12, HRC Level = 4 button cuffs. • Pleated sleeves ATPV= 7 oz. 88/12, HRC Level = 2 • 4 pocket construction AR51BO-18M Two Layer Bib Overalls 13 oz. Indura® Ultra Soft® Outer Layer IPT9 – Navy Industrial Pants 9 oz. Indura® Ultra Soft® Inner Layer Features include: 9 oz 88/12. 88% cotton/12% nylon material, Adjustable loop and buckles on bib strap button fly with self locking brass zipper, seven belt loops, two Tear drop style swing pockets hold plenty of items front pockets bar tacked at the bottom of the pocket, two Velcro® leg openings with gussets make for easy on and off welt hip pockets, Lintrack® permanent creases, left pocket with button closure. AR51BAG Arc Suit Storage Bag ATPV= 9 oz. 88/12, HRC Level = 2 Storage bag large enough to hold the hood, coat, and bib pants. IDPT12 - Denim Industrial Jean Pants Meets the performance requirements of NFPA 70E Current Features include: 12.4 oz 88/12. 88% cotton/12% nylon Edition and ASTM F1506 Current Edition. material, two front pockets, right pocket with watch pocket, Acceptable for use in occupations covered by OSHA Final Rule two patch style hip pockets, button fly with self locking brass 1910.269 Current Edition. zipper, Lintrack® permanent creases, seven belt loops. ATPV= 12.4 oz. 88/12, HRC Level = 2 Meets the performance requirements of NFPA 70E Current Edition and ASTM F1506 Current Edition. Acceptable for use in occupations covered by OSHA Final Rule 1910.269 Current Edition 8 800-645-9291 • www.lakeland.com • [email protected] PROTECTIVE CLOTHING FOR UTILITIES

Non Insulated and Insulated FR Clothing with Reflective Trim

D E F

D. Style CO81RT and CO81 Coveralls E. Style Insulated Coveralls F. Style Insulated Parka IP08RT13 9.0 oz. per square yard FR Cotton Style IC08RT13 Insulated Bib Overalls IB08RT13 NFPA 2112, UL certified Outer-shell: 9.0 oz. pre-shrunk FR cotton treated with a Outer-shell: 9.0 oz. pre-shrunk FR cotton treated with a Meets the requirements of NFPA 70E water repellent finish. water repellent finish. ATPV – 12.4, HRC 2 Liner: 9 oz. FR cotton batting quilted to 7.7 oz. pre-shrunk Liner: 9 oz. FR cotton batting quilted to 7.7 oz. pre-shrunk Unique Feature! Flared leg cuffs for ease of donning and FR cotton with a polyurethane wind barrier. FR cotton with a polyurethane wind barrier. doffing! ATPV: 55 cal/cm², HRC 4 ATPV: 55 cal/cm², HRC 4 • CO81RT coverall features reflective trim Outer shell and reflective trim are NFPA 2112 Certified Outer shell and reflective trim are NFPA 2112 Certified • CO81 coverall has no reflective trim • NFPA 2112 Reflective Tape, Thread and Zipper, Extra • NFPA 2112 Reflective Tape, Thread and Zipper, Extra • Pleated back with elastic waist for better movement and Reflective Tape for 360˚ Visibility Reflective Tape for 360˚ Visibility comfort • Reinforced stitching, storm flap and oversized pockets • Reinforced stitching, storm flap and oversized pockets • Sewn throughout with FR thread, No exposed metal next • Bi-swing back and elastic waist for comfort and protec- • Bi-swing back and elastic waist for comfort and protec- to skin tion tion • 7 pockets, left chest has safety flap, Swing pockets have • Heavy duty hook and loop closures • Heavy duty hook and loop closures internal pass-thrus to eliminate chance of exposure. • Leg zippers with full gussets • Non-metallic suspenders • Adjustable sleeve cuffs • Meets the performance requirements of NFPA 70E • Leg zippers with full gussets • Available colors are Navy, Khaki Gray (CO81 also available current edition and ASTM F1506 Current Edition. Accept- • Meets the performance requirements of NFPA 70E in orange) able for use in occupations covered by OSHA Final Rule current edition and ASTM F1506 Current Edition. Accept- Also available in our 7.0 oz. 88/12 FR. 1910.269 able for use in occupations covered by OSHA Final Rule 1910.269

Navy Khaki Gray

800-645-9291 • www.lakeland.com • [email protected] 9 Protect Your People™

Do not use for fire protection. Avoid open flame or intense heat. Pyrolon® Plus 2 garments are not Pyrolon® FR Disposable Clothing washable. Washing removes the special finishes, thereby removing the flame retardancy, water and oil repellent characteristics.

Pyrolon® Plus 2 Perfect for use over thermally protective and arc protective clothing! Pyrolon® Plus 2 offers wet or dry strength superior to that provided by other Flame Resistant disposables. Pyrolon® Plus 2 is breathable, making this a cool and comfortable garment to wear. They can be worn comfortably over Nomex or FR Cotton garments Coverall Coverall Coverall Coverall to help keep grease and grime 07412 07414 07417 07428 off primary FRC. Can be used to Pyrolon® Plus 2 Coverall, Pyrolon® Plus 2 Coverall, Pyrolon® Plus 2 Coverall, Pyrolon® Plus 2 Coverall, comply with Section 5.1.3 “End-User zipper closure. zipper closure, attached zipper closure, elastic zipper closure, attached Sizes: S – 5X hood, boots, elastic wrists. wrists and ankles. hood, elastic wrists and Requirements” of NFPA 2113 Case Pack: 25 Sizes: S – 5X Sizes: S – 5X ankles. Available in White or Blue. Case Pack: 25 Case Pack: 25 Sizes: S – 5X Case Pack: 25

Pyrolon® XT Lakeland Pyrolon® XT coveralls are “Tough as Nails”! 70% stronger than Pyrolon® Plus 2, these garments are reinforced with a Cerex® Nylon scrim and a repellent finish. Our Pyrolon® XT wear is air permeable with very high MVTR’s. They can be worn over Nomex® or Indura® FR cotton garments to help keep grease and grime off the Coverall Coverall Coverall Coverall more expensive coveralls. Pyrolon® 27412 27414 27417 27428 XT is a cost effective garment for Coverall, zipper Coverall, zipper Coverall, zipper Coverall, zipper applications where FR clothing closure. closure, attached closure, elastic wrists closure, attached is required. Pyrolon® XT can be Sizes: S – 5X hood, boots, elastic and ankles. hood, elastic wrists used in work environments where Case Pack: 25 wrists. Sizes: S – 5X and ankles. Sizes: S – 5X Case Pack: 25 Sizes: S – 5X hazardous or non-hazardous Case Pack: 25. Case Pack: 25 contaminants may be present. Pyrolon® CRFR Disposable, Chemical Resistant, and Flame Retardant, all rolled into one garment. Pyrolon® CRFR protective wear...They’re unique. They’re disposable. They’re chemical resistant. And they’re flame retardant, meeting NFPA 2113 requirements. Imagine, all these qualities in one protective garment. Only from Lakeland. Pyrolon® CRFR garments bar contaminating flammables like paint, oil and grease, PCB’s in transformer oil, hazardous liquids, and dry Coverall Coverall 51110 particulates from penetrating to inner clothing. 51130 51150 Coverall, collar, storm flap Coverall, hood, elastic face, Coverall, hood, elastic face over zipper, elastic wrists Pyrolon CRFR is designed to be self wrists, and ankles. and wrists and attached and ankles. extinguishing; it won’t melt or drip and can Sizes: S - 5XL boots. Sizes: S - 5XL be worn over primary thermally protective Case Pack: 6 Sizes: S - 5XL Case Pack: 6 coveralls where flash fire or arc flash is a Case Pack: 6 concern.

10 PROTECTIVE CLOTHING FOR UTILITIES

Hand Protection

SpiderGrip® Cut Resistant Work Gloves ShurRite® Kevlar® Cut Resistant Gloves Kevlar® Sleeves Style 96-5205 Spider Grip High Performance Style 21-1634 7 gauge 100% Kevlar knit Style 41822 100% Kevlar, 2 ply sleeve, 3” Polyethylene (HPPE) polyurethane dipped glove, black PVC dots, (2 sides), cut level 2, width, cut level 2, 18 in length. glove, cut level 3, sizes S-XL sizes S-XL. Style 41822TH 100% Kevlar, 2 ply sleeve, 3 in • Advanced protection of high performance • Excellent cut resistance width, thumb hole, cut level 2, 18 in length. fibers • Heat resistant • Excellent cut resistance • Seamless design • Out last cotton, leather and coated gloves • Heat resistant • Ergonomic fit • Excellent dexterity and flexibility • Convenient thumb hole design • Super cut and Puncture Protection • Breathable for better comfort • Available in 14” to 24 in length • Long wearing

Style 7-1301

Style 7-1506

SpiderGrip® Work Gloves SpiderGrip® Cut Resistant Work Gloves Style 7-1506 Spider Grip Polyester cotton Style 7-1301 Spider Grip Plus, heavyweight Style 22-1508 Spider Grip Kevlar® knit latex latex dipped work glove, sizes S-XL acrylic latex dipped glove, sizes S-XL dipped glove, cut level 2, sizes S-XL • Crinkle dip latex palm provides excellent • Heavy weight acrylic provides added • Advanced protection of high performance grip protecting in low temperature applications fibers • Breathable back for comfort • Crinkle dip latex palm provides excellent • Seamless design • Puncture resistant grip • Ergonomic fit • Ergonomic fit • Puncture resistant • Super cut and Puncture Protection • Long wearing • Breathable back for comfort • Long wearing • Long wearing 800-645-9291 • www.lakeland.com • [email protected] 11 Protect Your People™

Warranty and Warnings

Warranty Information of any product found to be defective within Lakeland chemical protective ensembles that It is the responsibility of the user to select 90 days after the product is delivered. IN NO are certified to NFPA 1991 require an over- garments and glove products which are EVENT SHALL LAKELAND INDUSTRIES, INC. cover. The protective over-cover provides appropriate for each intended use and which BE LIABLE FOR ANY SPECIAL, INCIDENTAL additional protection against abrasion, cut, tear meet all specified government and industry OR CONSEQUENTIAL DAMAGES, WHETHER or puncture, and direct flame impingement. (All standards. IN CONTRACT OF IN TORT, ARISING OUT NFPA compliant Interceptor® ensembles utilize OF ANY WARRANTIES, REPRESENTATIONS, specific, multiple glove combinations and IMPROPER USE OF THESE PRODUCTS INSTRUCTIONS, OR DEFECTS FROM specific boots. All components of the specified MAY RESULT IN PERSONAL INJURY OR ANY CAUSE IN CONNECTION WITH THE ensemble must be worn to be compliant with DEATH. IMPROPER USE INCLUDES, BUT IS GARMENT, OR THE SALE THEREOF. the requirements of this standard.) NOT LIMITED TO IMPROPER SELECTION, USE WITHOUT ADEQUATE TRAINING, Purchaser and all users are responsible for Lakeland protective garments will burn except DISREGARDING THESE WARNINGS AND inspection and proper care of this product as where our garments are specifically advertised INSTRUCTIONS SUPPLIED WITH THE described in any OF OUR care and use manuals as fire resistant. These garments should not be PRODUCTS AND FAILURE TO INSPECT and are responsible for all loss or damages from worn around heat, open flames, sparks or any AND MAINTAIN THE PRODUCTS. THESE use or handling which results from conditions other possible ignition source nor in potentially PRODUCTS ARE INTENDED TO BE USED beyond the control of the manufacturer. explosive or flammable environments. ONLY IN CONJUNCTION WITH THE Product safety information is available upon If a Lakeland protective garment is abraded, ENVIRONMENTAL PROTECTION AGENCY request. This information corresponds to our cut, torn, punctured or otherwise and in any (EPA) RULES AND REGULATIONS, current knowledge on the subject. It is offered way breached, do not use. The protective (http://www.epa.gov/lawsregs/ ) solely to provide possible suggestions for garment material has finite resistance to AND THE REQUIREMENTS OF OSHA SAFETY your own experimentations. It is not intended, abrasion, cut, tear and puncture. It is the AND HEALTH STANDARD 29 CFR 1910 however, to substitute for any testing you may responsibility of the wearer to inspect Lakeland AVAILABLE FROM THE U.S. DEPARTMENT need to conduct to determine for yourself the garments prior to use to insure the integrity of OF LABOR, OCCUPATIONAL SAFETY AND suitability of our products for your particular the garments and components. HEALTH ADMINISTRATION, purposes. It is the user’s responsibility to If a Lakeland protective garment is damaged (http://www.osha.gov), OR OTHER determine the level of risk and the proper during use, retreat immediately to a safe PERTINENT NATIONALLY RECOGNIZED protective equipment needed for the user’s environment, thoroughly decontaminate the STANDARDS, SUCH AS THOSE particular purposes. This information may be garment, then dispose of it in a safe manner. PROMULGATED BY THE NATIONAL FIRE subject to revision as new knowledge and PROTECTION ASSOCIATION (NFPA) (www. experience becomes available. Since we cannot Limitations of Use nfpa.org), THE AMERICAN SOCIETY FOR anticipate all variations in actual end-use Lakeland protective garments are not intended TESTING MATERIALS (ASTM) (www. conditions, LAKELAND INDUSTRIES, INC. for protection against radiological hazards. astm.org), THE NATIONAL INSTITUTE OF MAKES NO WARRANTIES AND ASSUMES If the danger of exposure to biological aerosols OCCUPATIONAL SAFETY AND HEALTH NO LIABILITY IN CONNECTION WITH ANY or chemical warfare chemicals exists, the (NIOSH) (www.cdc.gov/niosh/rpg), AND THE USE OF THIS INFORMATION. Nothing in this use of a protective ensemble certified to the U.S.COAST GUARD OR DEPARTMENT OF publication is to be considered as a license to optional Chemical and Biological Terrorism DEFENSE. It is incumbent upon the wearer operate under or a recommendation to infringe requirements of NFPA 1991 (2005 Edition) or and legally required of an employer to read any patent right. garments certified to Class 2 of NFPA 1994 and understand these regulations. should be considered. Each of these standards THESE PRODUCTS ARE NOT FLAME Warnings and Limitations provides different levels of performance. RESISTANT AND SHOULD NOT BE USED Lakeland’s garments are not suitable for use Chemical Permeation Data AROUND HEAT, FLAME, SPARKS, OR IN in all situations and environments with all Before using a protective ensemble in a POTENTIALLY FLAMMABLE OR EXPLOSIVE chemical and hazardous materials. All decisions chemical situation, consult the chemical ENVIRONMENTS EXCEPT WHERE OUR regarding the choice and usage of chemical permeation data appropriate to the garment GARMENTS ARE SPECIFICALLY ADVERTISED protective clothing must be done by trained material. Note that seams, visors and AS FIRE RESISTANT OR RETARDANT. and qualified safety professionals in accordance closures will generally have lower or different NO EXPRESSED OR IMPLIED WARRANTIES with all OSHA and EPA Rules and regulations. permeation times than the garments’ material. OF FITNESS FOR A PARTICULAR PURPOSE Failure to follow such regulations absolves This information is to be used as a guide only. OR OF MERCHANTABILITY OR OTHERWISE Lakeland Industries, Inc. from all liability. It is The permeation performance of any material IS MADE. Purchaser and all garment users shall the user’s responsibility to determine the level depends on a number of factors including promptly notify Lakeland Industries, Inc. of any of exposure and the proper personal protective chemical concentration, temperature, time and claim, whether based on contract, negligence, equipment needed. It is the employer’s LEGAL amount of exposure. Due to the large number strict liability or otherwise. RESPONSIBILITY to provide proper protective of variables, it is impossible for all ensemble clothing to employees, and adequate care, use materials to be tested against all elements, The sole and exclusive remedy of the purchaser and maintenance of these garments as only chemicals, all combinations or mixtures thereof, and all end users and the limit of liability of your employer knows the conditions under and all temperatures at which the chemical Lakeland Industries, Inc. for any and all losses, which the wearer works. Lakeland has no such might be encountered. injuries or damages shall be the refund of the knowledge, so ask your employer. purchase price or the replacement or repair Chemical permeation tests are performed

12 800-645-9291 • www.lakeland.com • [email protected] PROTECTIVE CLOTHING FOR UTILITIES

under laboratory conditions -- not actual Lakeland’s light non-woven fabrics, Chemax® workplace conditions. They address and Interceptor® line, are not intended for chemical breakthrough characteristics and fire fighting activities, nor for protection from do not account for physical performance hot liquids, steam, molten metals, welding, characteristics that affect a barrier such as electrical arc or thermal radiation. USE abrasion, flex fatigue, puncture, tear, oxidative COMMON SENSE! DO NOT SMOKE, OR USE degradation, or degraded performance due to ELECTRICAL MACHINERY, AND INSURE USE previous use contaminations. OF PROPER BONDING AND GROUNDING No single protective material will protect where flammable gas, liquids or solids exist. against all chemicals for all situations. The Anti-static treatments and coatings are not best course of action is to test the primary adequate for all environmental conditions. protective garment materials against the Static electricity in non-humid or winter specific chemical hazard, at the temperature environments can cause a deadly flash and in the concentrations to be encountered. fire where flammables are present in the Lakeland Industries, Inc. will provide free workplace. Lakeland’s garments are intended swatches of primary garment materials for to help reduce the potential for injury, but testing and can provide you with a list of no protective apparel alone can eliminate all testing facilities. risk of injury. When dealing with fire, heat, or flammable atmospheres, or even the potential Never Use Pure Oxygen of same, look to Lakeland’s FIRE RESISTANT/ The use of 100% oxygen with these garments RETARDANT APPAREL LINES. presents serious fire safety and health hazards. Use only properly functioning breathing © Copyright 2012 Lakeland Industries, Inc. All quality, compressed air, air line supplied rights reserved. breathing air, or a rebreather system. Note that some rebreather systems utilize small oxygen cylinders, but these do not create enriched oxygen atmosphere. Wearing garments made of fire retardant cottons, aramids or modacrylics under or over Lakeland light non-woven or ChemMax® garments will not reduce burn injury during a flash fire. Chemmax® garments will burn and possibly melt when exposed to flash fire; this is likely to increase burn injuries even when worn over flame resistant fabrics. This is also true of Lakeland MicroMax® NS, MicroMax® NS Cool Suit, MIcroMax®, MicroMax® HBF, MicroMax® 3P, MicroMax® 3P Cool Suit, SafeGard®, SafeGard® Economy SMS, ZoneGard®, Rytex® and other Lakeland light non-woven fabric lines. However, Pyrolon® fabrics and garments are intended to be worn over fire retardant cottons, aramids and modacrylics. Therefore users of any of these flammable garments should not enter an environment in which the concentration of flammable gas (such as paint fumes, hydrocarbon fumes or pure oxygen) has reached a concentration which is within flammable, ignitable or explosive limits, causing a fire or flash fire. Simply stated, if there is a flash fire, nothing will protect you from severe burns or death. Therefore, it is the user’s responsibility to think before working in even a potential flammable gaseous atmosphere.

800-645-9291 • www.lakeland.com • [email protected] technical expertise for wherever for you business. do technical expertise and innovations and in fabrics the world hasthe best to offer countries. in than more operations we you 40 So bring sales can InternationalLakeland is growing rapidly, and with production World-wide and growth presence and streamlining operations. our systems, our upgrading ment efforts, develop and product R&D personnel, We’re and support sales our doubling you better protect and serve –to growth for Investing you. guide to choices-and fabric the expertise or such comprehensive product offer can else in the Protective Industry Apparel one no Resistant and Fire Service/EMS, tive to Flame/Arc and Arm, Hand Flash From to Chemical, Disposables Reflec fabrics and rangeBroadest of products choices and fabric in the world. available anywhere products innovative most Protective the best, delivers Lakeland Clothing Reflective Clothing Chemical Clothing Disposable Clothing Protect Your People™ Protect All of your safety apparel needs under one roof. - - Email: [email protected] 256-350-0773 Fax: 256-350-3873 Voice: 800-645-9291 Toll Free: USA the In 1-800-645-9291 Email: [email protected] 519-757-0799Fax: 519-757-0700Voice: 800-489-9131 Toll Free: In Canada petitors, we don’t use contractors. We we don’t use contractors. petitors, make own our so apparel, It is core our business. people. Unlike protects Lakeland com our own products our -we maker manufacture the Know Lakeland Fire Woven Clothing Safety Gloves PROTECTIVE grow with us! and your people, usLet you help protect we to ship who Andyou call. it. know it, we make we the garment, inspect what we We are all about. design the fabric, user- the end protecting whereas that is and focus on lack expertise our of their business, and they is aportion only clothing protective For contractors, most delivery. we have control maximum over and quality CLOTHING FORUTILITIES