DOCSLIB.ORG

Updated Specifications Occupation-3. Welding and Fabrication

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Updated Specifications Occupation-3. Welding and Fabrication Skills 21 – Empowering Citizens for Inclusive and Sustainable Growth Project Occupation: Welding and Fabrication National Certificate_ Level 1 and 2 LIST OF TOOLS & EQUIPMENT/MACHINERY Quantity Sl. Name of equipment Specification Feni BS Kaptai Gaibandha Jamalpur Total Unit Price Total Amount Sylhet TSC IMT Bgt VTTI Polytechnic Polytechnic TTC TSC 1 Adjustable Wrench Set Brand and Model to be given by the bidder: 5 4 0 5 3 4 5 26 Overall Length: 300 mm Materials: Drop forged chrome vanadium steel 2 Allen Keys Brand and Model to be given by the bidder: 5 4 0 5 3 5 0 22 Metric allen wrench set with split ring keeper. Allen wrench sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm. Hardened and tempered industrial grade chrome vanadium steel, with black oxide finish for durability Perfect addition to any shop, garage or household. 3 Anvil Made by forged steel or cast steel, Size 18 inch,100 5 5 5 5 5 5 5 35 lbs 4 Ball Peen Hammer Heads and forged 18 23 0 0 18 18 12 89 Wooden Handle Polished drop forged and Heat treated Overall Length 300 mm Weight: 1 lb 5 Ball Peen Hammer Heads and forged 5 4 0 3 3 3 5 23 Wooden Handle Polished drop forged and Heat treted Overall Length 300 mm Weight: 2 lbs. 6 Bench drilling Machine Brand and Model to be given by the bidder: 2 2 2 2 2 2 2 14 Drilling diameter: 13 mm (Max.) Travel of spindle: 50 mm Speed of spindle: 5 speed Motor: 220V, 50 Hz, 350W Table size: 160 x 160 mm Base size: 200 x 314 9MIN.) 7 Bench Grinding Brand and Model to be given by the bidder: 3 3 0 0 0 0 3 9 Machine Size: 175-180 mm Voltage: 220V, 50Hz No load speed: 3500 rpm (min) Wheel: 200 x 20 x 16 mm (min) Floor mounted pedestal drill machine with Standard Accessories 8 Bench Grinding Brand and Model to be given by the bidder: 3 3 2 0 2 0 3 13 Machine Size: 175-180 mm Voltage: 220V, 50Hz No load speed: 3500 rpm (min) Wheel: 200 x 20 x 16 mm (min) Floor mounted pedestal drill machine Supplied Standard Accessories The bidder must provide Printed Catalog indicating quality certified 9 Bench Vice Brand and Model to be given by the bidder: 14 8 0 0 8 20 10 60 Substantial bench mounting vices of 150 mm jaw width for general purpose with pipe gripping jaw, made of high grade grey cast iron detachable fiber grips for clamping softer materials and finished surfaces. Jaw width : 150mm Jaw opening : 205mm Jaw depth : 90mm Overall height : 215mm Overall width : 210mm 10 Bench Vice Brand and Model to be given by the bidder: 14 8 8 0 15 20 5 70 Substantial bench mounting vices of 150 mm jaw width for general purpose with pipe gripping jaw, made of high grade grey cast iron detachable fiber grips for clamping softer materials and finished surfaces. Jaw width : 150mm Jaw opening : 205mm Jaw depth : 90mm Overall height : 215mm Overall width : 210mm 11 Bevel Protractor Brand and Model to be given by the bidder: 5 5 2 5 3 5 5 30 Graduation 5min.(0 Degree - 90 Degree ) Material Stainless Steel 12 Breathing Apparatus Brand and Model to be given by the bidder: 3 3 3 3 3 3 3 21 Capacity 30 or 45 mins Cylinder Hydro Tested Diameter 139.7 mm Gas Cylinder Size 6 litres 13 C-Clamp Brand and Model to be given by the bidder: 10 10 0 10 9 7 0 46 Made by Cast Iron 3,6,9 inch 14 Centre Punch Brand and Model to be given by the bidder: 14 19 0 24 24 14 0 95 Overall Length: 100 mm Cast frame Range: 0~25mm Standard center punch with chemically blackened, knurled grips and square head. A fine machine ground point and 60º chamfer permit accurate location and well defined impression to be made 15 Chipping Hammer Brand and Model to be given by the bidder: 14 0 0 0 24 14 20 72 Heads and forged MS Handle Polished drop forged and Heat treated Overall Length 200 mm Weight: 1/2 lbs. 16 Chisels Brand and Model to be given by the bidder: 5 0 0 5 5 3 0 18 A set of 6 chisels with toughness and resistance to breaking. Made from high quality alloy steel. 17 Combination Pliers Brand and Model to be given by the bidder: 12 8 2 7 10 10 10 59 Overall Length: 160mm Material: Forged chrome vanadium steel, with serrated jaws with pipe grip and side cutter, rubber insulated handle 18 Cutting Nozzle Brand and Model to be given by the bidder: 10 7 0 5 10 10 5 47 High quality Pilot Gas Cutting Torch GCT-07, 3/64'' Nozzle by Pilot Oxygen : Bar- 2 / Psi-30 Acetylene: Bar-0.1 / Psi-52 Cut(MS) : 12mm / 1/2'' 19 Depth Gauge Brand and Model to be given by the bidder: 5 5 2 5 5 5 5 32 Measuring Range 0-200mm Material Hardened Stainless Steel Accuracy 0.02mm Resolution 0.01mm/0.0005inch 20 Dial Gauge Brand and Model to be given by the bidder: 5 5 2 5 4 5 5 31 Range 0-10 mm, Accurecy ±0.01mm 21 Digital Thermometer Brand and Model to be given by the bidder: 5 5 2 5 5 5 5 32 Battery 9V, Measurment Range (deg C) -50-+1300, -50 to +1300 Display 4-digit LCD display, up to 9999 display, Resolution (deg C) Operating Temperature and Humidity Range 0 over 50 degree C / 0 over 80% RH (0 over 35 degree C), 0 -60% (35 over 50 degree C), 0 - 50 deg C ? 0 - 80% RH (0 - 35 deg C), 0 - 60% (35 - 50 deg C) Temperature Coefficient 0.15 (23 + / over 5 degree C) x (measurement accuracy), 0.15 (23 +/- 5 deg C) x (measurement accuracy) 22 Divider Brand and Model to be given by the bidder: 20 15 0 20 10 16 0 81 Precision spring action divider made from high quality tool steel. The divider points are hardened ground for marking, the legs of the divider are fitted with bow spring and knurled adjusting nut enabling fine control. Type-150mm 23 Files-Bastard Cut Brand and Model to be given by the bidder: 20 15 0 20 20 20 20 115 Overall Length: 200 mm Plastic Handle 24 Files-Half Round Brand and Model to be given by the bidder: 12 5 0 12 10 6 12 57 Overall Length: 200 mm Plastic Handle 25 Fire Aid Box Brand and Model to be given by the bidder: 1 1 1 0 1 1 1 6 Suitable for treatment of minor injuries only Typical contents include adhesive bandages, regular strength pain medication, gauze and low grade disinfectant. Supplied with box 26 Fire Blanket Brand and Model to be given by the bidder: 2 2 2 2 2 2 2 14 Good 1.0m x 1.5m size that is perfect for home and caravan kitchens. Ideal also for smothering fires at the BBQ. Durable soft case with quick-release tabs for responding quickly to fires. Easy-to-understand instructions and five-year warranty. 27 Fire Escape Brand and Model to be given by the bidder: 1 1 1 1 1 1 1 7 Staircase/Ladder Overall Length: 3.6m. Aluminum legs Overall Length: 3.6m. Aluminum legs 28 Fire Extinguisher Brand and Model to be given by the bidder: 2 1 1 0 1 0 2 7 Type: portable ABC dry powder Agent: NH4 H2 PO4 Working Temperature: 20 - 550C 29 Fire Suit Brand and Model to be given by the bidder: 3 3 3 3 3 3 3 21 FLAME TEMPERATURE CAN REFLECT---500 ℃ MATERIAL---composite aluminized material PACKAGE INCLUDES---helmet, jacket, overall, gloves, feet protector FULL BODY COVER---provide the most comprehensive protection WIDELY USED IN high flame reflection places 30 Foldable platform Brand and Model to be given by the bidder: 1 1 1 1 1 1 1 7 ladder Overall Length: 3.6m. Aluminum legs 31 Gauge Blocks Brand and Model to be given by the bidder: 5 5 3 5 3 5 5 31 Wooden Box, 1mm to 100mm, 47 pcs, made of cromium steel 32 Geometrical Brand and Model to be given by the bidder: 24 24 9 24 24 24 24 153 Instruments Material: Steel Colour: Grey Dimensions (L x W X H): 18 cm x 8 cm x 2 cm Package Contents: Compass, Divider, Eraser, Set Square 45 Degree, Set Square 60 Degree, Pencil, Scale 15 Cms, Protractor 180 Degree & Sharpener 33 Hacksaw Brand and Model to be given by the bidder: 0 0 0 0 0 4 0 4 Chrome plated hacksaw Frame Size: 300 mm. Surface finishing: chrome plating, black finished and color painted Adjustable design 34 Hand Drill Machine Brand and Model to be given by the bidder: 4 4 3 3 4 0 4 22 Size: 10 mm (min.) Voltage: 220V, 50 Hz load speed: 0-2300 rpm The bidder must provide Printed Catalog indicating quality certified 35 Hand Grinding Brand and Model to be given by the bidder: 10 8 0 8 10 9 10 55 Machine (Angle Size: 100 mm Grinder) Voltage: 220V, 50Hz Load speed: 11000 rpm 36 Hand Grinding Brand and Model to be given by the bidder: 8 9 0 5 10 9 8 49 Machine (Straight No Load Speed: 11000 rpm 220vt 50Hz Grinder) Grinding spindle thread M 10 Disc Diameter: 100 mm Colour Green Item Weight: 1.8 Kg 37 Hand Shear Machine Brand and Model to be given by the bidder: 2 2 2 2 2 2 2 14 Floor mounted, Blade size 150 mm 38 Hand Shield Brand and Model to be given by the bidder: 14 17 0 0 18 0 20 69 With dark glass 39 Heating Nozzle Brand and Model to be given by the bidder: 6 0 0 0 6 6 4 22 Fuel Pressure: 15 to 25 psig Tip Size: 10 40 Industrial Fan Brand and Model to be given by the bidder: 2 1 2 2 2 2 2 13 Padester, 24 inch, 220vt 50Hz 41 Jigs and Fixtures Brand and Model to be given by the bidder: 5 5 0 5 5 5 5 30 Work holding tool 42 Letter Punch Brand and Model to be given by the bidder: 1 1 0 1 0 1 1 5 A to Z Finish: Black Burnish Finish Type: Plastic Color Boxes Technical : Induction Hardened Sizes: 1.5 mm to 12 mm Material: Carbon Steel 43 Magnifying Glass Brand and Model to be given by the bidder: 24 24 4 24 24 24 24 148 Assembled Product Dimensions (L x W x H) 8.43 x 4.41 x 0.63 Inches 44 Micrometer Brand and Model to be given by the bidder: 10 4 0 10 5 10 10 49 Size 0 to 25mm Qty: 24 inside, 25 outside 45 Nion Tester Brand and Model to be given by the bidder: 6 6 6 6 6 6 6 42 220vt, AC, 5Amp 46 Number Punch Brand and Model to be given by the bidder: 1 1 0 1 0 1 1 5 Made by forge steel o-9, Woks 1/16"(1.5mm) High Hardness Carbon Steel Uppercase Number Ball Pin Hammer Hand Punch Metal Stamp Set for Mold Jewel Making Die (1.5mm Number Reverse Punch) 47 Optical Pyrometer Brand and Model to be given by the bidder: 1 1 0 1 1 1 1 6 Dual laser targeting IR/Optical Pyrometer 1000°C non-contact type infrared temperature measurement 1400°C type K thermometer Large LCD display with back light D/S ratio value: 50/1 Min., Max., Differential, Average, Lock mode Hi/Lo Temperature Audio Alarm.
Load more

Recommended publications
  • Curriculum Outline Industrial Mechanic (Millwright)
    Industrial Mechanic (Millwright) 2017 CURRICULUM OUTLINE INDUSTRIAL MECHANIC (MILLWRIGHT) STRUCTURE OF THE CURRICULUM OUTLINE To facilitate understanding of the occupation, this standard contains the following sections: Description of the Industrial Mechanic (Millwright) trade: An overview of the trade’s duties, work environment, job requirements, similar occupations and career progression Trends in the Industrial Mechanic (Millwright) trade: Some of the trends identified by industry as being the most important for workers in this trade Essential Skills Summary: An overview of how each of the 9 essential skills is applied in this trade Task Matrix: a chart which outlines graphically the major work activities, tasks and sub-tasks of this standard Elements of harmonization of apprenticeship training: includes number of levels of apprenticeship, total training hour and recommended apprenticeship levels Sequencing of apprenticeship training topics and related subtasks: a chart which outlines the model for apprenticeship training sequencing and a cross-reference of the sub-tasks covered by each topic Major Work Activity (MWA): the largest division within the standard that is comprised of a distinct set of trade activities Task: distinct actions that describe the activities within a major work activity Task Descriptor: a general description of the task Sub-task: distinct actions that describe the activities within a task Recommended apprenticeship level: as part of the interprovincial discussions on harmonization, this is the recommended level
    [Show full text]
  • Sagar Industrial Tools Co
    +91-8048005117 Sagar Industrial Tools Co. https://www.indiamart.com/sagar-industrial/ We are one of the renowned firms manufacturing and supplying large assortment of Automatic Center Punch, C Clamps, Engineer Steel Scribers, Pin Vices, Pin Chuck Set, Beam Trammels, Straight Edges and many more. About Us Established in 1989, Sagar Industrial Tools Co. has come up as a well known firm manufacturing and supplying a large variety of industrial products in the market. Our product range include items like Automatic Center Punch, C Clamps, Engineer Steel Scribers, Pin Vices, Pin Chuck Set, Beam Trammels, Straight Edges, Tool Holders, Revolving Centers, Morse Taper Drill Sleeves, Arbors For Drill Chucks, Lathe Dogs Carriers, Surface Gauges, Vee Blocks, Spring Callipers, VBOX Sport, Grinding Carriers, Magnetic Chucks, Magnetic V Block, Sine Bar, Angle Plate, Precision Boring Head, Steel Parallels, Cast Iron Vee Blocks Firm Joint, Cast Iron Firm Joint Jenny Callipers, Adjustable Try Square, Depth Gauge, Comparator Stand and Centre Square. Our provided items are broadly notable in the market, due to its outstanding characteristics including strong structure, hassle free installation, superb strength and high durability. These products are highly demanded in numbers of industries. The mentioned products are developed by our deft workers using contemporary technology and quality proven raw material. Apart from this, customers can purchase these quality certified products from us at cost effective prices within the defined time frame. We are supported by a team of experienced and extremely qualified professionals; they in turn facilitated us in efficient and prompt services to our customers. Our team has expertise in this field and enables us to supply the..
    [Show full text]
  • Sine Bars, Blocks, Plates, and Fixtures
    » hook not to w Standards ' ot ' • National Bureau . ~ \ ^ . 1 . I I* i^iii IfwICll iili JUL 2 2 1947 SINE BARS, BLOCKS, PLATES, AND FIXTURES COMMERCIAL STANDARD CS141-47 Effective Dale for New Production From August 15, 1947 A RECORDED VOLUNTARY STANDARD OF THE TRADE UNITED STATES DEPARTMENT OF COMMERCE W. AVERELL HARRIMAN, Secretary For sale by the Superintendent of Documents, U. S. Government Printing Office Washington 25, D. C. - Price 5 cents COMMERCIAL STANDARDS Commercial Standards are voluntary standards of the trade devel- oped through concerted action of those directly concerned, and issued by the United States Department of Commerce upon written evidence of their acceptability to the trade. They are initiated by written request from a responsible element of business to the Division of Trade Standards of the National Bureau of Standards. The Division of Trade Standards acts as a coordinating and fact-finding agency in ascertaining the desires of all concerned. The Federal Government exercises no regulatory authority in the enforcement of Commercial Standards. In accepting a Commercial Standard, the producer, distributor, or user says in effect that he considers it a useful standard of practice, and plans to utilize it as far as practicable in his business, reserving the right to depart from the standard so long as no deception results from such departure. When reference to a Commercial Standard is made in contracts, labels, invoices, or advertising literature, however, the provisions of the standard are enforcible through usual legal channels as a part of the sales contract. Organized in 1927, the Division of Trade Standards has assisted many industries in the development of Commercial Standards for a wide variety of commodities.
    [Show full text]
  • A History of the French in London Liberty, Equality, Opportunity
    A history of the French in London liberty, equality, opportunity Edited by Debra Kelly and Martyn Cornick A history of the French in London liberty, equality, opportunity A history of the French in London liberty, equality, opportunity Edited by Debra Kelly and Martyn Cornick LONDON INSTITUTE OF HISTORICAL RESEARCH Published by UNIVERSITY OF LONDON SCHOOL OF ADVANCED STUDY INSTITUTE OF HISTORICAL RESEARCH Senate House, Malet Street, London WC1E 7HU First published in print in 2013. This book is published under a Creative Commons Attribution- NonCommercial-NoDerivatives 4.0 International (CC BY- NCND 4.0) license. More information regarding CC licenses is available at https://creativecommons.org/licenses/ Available to download free at http://www.humanities-digital-library.org ISBN 978 1 909646 48 3 (PDF edition) ISBN 978 1 905165 86 5 (hardback edition) Contents List of contributors vii List of figures xv List of tables xxi List of maps xxiii Acknowledgements xxv Introduction The French in London: a study in time and space 1 Martyn Cornick 1. A special case? London’s French Protestants 13 Elizabeth Randall 2. Montagu House, Bloomsbury: a French household in London, 1673–1733 43 Paul Boucher and Tessa Murdoch 3. The novelty of the French émigrés in London in the 1790s 69 Kirsty Carpenter Note on French Catholics in London after 1789 91 4. Courts in exile: Bourbons, Bonapartes and Orléans in London, from George III to Edward VII 99 Philip Mansel 5. The French in London during the 1830s: multidimensional occupancy 129 Máire Cross 6. Introductory exposition: French republicans and communists in exile to 1848 155 Fabrice Bensimon 7.
    [Show full text]
  • Suburban Tool, Inc. U R Workholding and Inspection Equipment B a N
    PC2010B S Suburban Tool, Inc. U R Workholding and Inspection Equipment B A N T O O L I N C TM P C 2 0 1 0 Suburban’s 64,000 square foot facility in Auburn Hills, Michigan SUBURBAN TOOL, INC. has 40+ years experience in manufacturing the highest quality workholding products and inspection equipment. A significant part of Suburban’s quality is due to our experienced craftsmen adhering to precision standards. Suburban’s products are manufactured by using exacting procedures. These products are intended for use by knowledgeable and experienced people. Take time to review the ever growing product line in the pages that follow. The products shown are proudly MADE IN THE USA! Suburban Tool is a member of the: Association for Manufacturing Technology (AMT) www.amtonline.org Eastern Michigan Tool & Die Collaborative (EMTD) www.emtd.net Industrial Supply Association (ISA) www.isapartners.org Michigan Manufacturers Association (MMA) www.mma-net.org i TABLE OF CONTENTS Suburban Tool Products Metrology Equipment 1-8 & Accessories Pallet Fixtures, 9-21 Base Plates, & Vises Angle Plates 22-29 & Irons, Box Parallels and Cube The SineSet® System 30-33 + = Sine Plates 34-45 Magnetic & Vacuum Chucks, 46-55 Controls & Pumps Index Fixtures & Accessories 56-61 Vises & Sine Vises 62-64 V-Blocks 65-66 Straight Edges, 67-71 Tri-Blocks & Parallels Phone: 888-647-8665 ii Email: [email protected] TM Suburban Tool, Inc. TABLE OF CONTENTS Other Fine Tools 72-76 Taft-Peirce Metrology Products Bench Centers & Accessories 77-83 Angle Setting & 84-85, 98 Checking Tools Angle Irons 86-89 V-Blocks 90-92 Tri-Blocks, Parallels 92-95 & Straight Edges Squares 96-97 Reference Section .
    [Show full text]
  • Gate Solved Paper - Me
    GATE SOLVED PAPER - ME MANUFACTURING ENGINEERING YEAR 2013 ONE MARK Q. 1 Match the correct pairs Processes Characteristics/Applications P. Friction Welding 1. Non-consumable electrode Q. Gas Metal Arc Welding 2. Joining of thick plates R. Tungsten Inert Gas Welding 3. Consumable electrode wire S. Electroslag Welding 4. Joining of cylindrical dissimilar material (A) P-4, Q-3, R-1, S-2 (B) P-4, Q-2, R-3, S-1 (C) P-2, Q-3, R-4, S-1 (D) P-2, Q-4, R-1, S-3 Q. 2 In a rolling process, the state of stress of the material undergoing deformation is (A) pure compression (B) pure shear (C) compression and shear (D) tension and shear Q. 3 For a ductile material, toughness is a measure of (A) resistance to scratching (B) ability to absorb energy up to fracture (C) ability to absorb energy till elastic limit (D) resistance to indentation. Q. 4 A cube shaped solidifies in 5 min. The solidification time in min for a cube of the same material, which is 8 times heavier than the original casting, will be (A) 10 (B) 20 (C) 24 (D) 40 Q. 5 A steel bar 200 mm in diameter is turned at a feed of 0.25mm / rev with a depth of cut of 4mm. The rotational speed of the workpiece is 160 rpm. The material removal rate in mm3/ s is (A) 160 (B) 167.6 (C) 1600 (D) 1675.5 YEAR 2013 TWO MARKS Q. 6 In a CAD package, mirror image of a 2D point P^h510, is to be obtained about a line which passes through the origin and makes an angle of 45c counterclockwise with the X -axis.
    [Show full text]
  • Unit III Introduction Angular Measurement Is an Important Element in Measuring. It Involves the Measurement of Angles of Tapers and Similar Surfaces
    Unit III Introduction Angular measurement is an important element in measuring. It involves the measurement of angles of tapers and similar surfaces. In angular measurements, two types of angle measuring devices are used. They are Angle gauges corresponding to slip gauges. Divided scale corresponding to line standard. The most common instrument is sine bar. The main difference between linear and angular measurement is the no absolute standard is required for angular measurement. Sine bar Sine bar are always used along with slip gauges as a device for the measurement of angles very precisely. They are used to: Measure angle very accurately. Locate the work piece to given angle with very high precision. Sine bars are made from high carbon, high chromium, and corrosion resistant steel. These materials are highly hardened, ground and stabilised. In sine bar, two cylinders of equal diameter are attached at the ends with its axes mutually parallel to each other. Two cylinders are also equal distance from the upper surface of the sine bar. Mostly the distance between the axes of two cylinders is 100mm, 200mm or 300mm. The working surfaces of the rollers are finished to 0.2µm Ra value. The cylindrical holes are provided to reduce the weight of the sine bar and alsoto facilitate handling. Working principle of sine bar The working of sine bar is based on trigonometry principle. To measure the angle of the specimen, one roller of the sine bar is placed on the surface plate and another one roller is placed over the surface of slip gauges. Now, ‘h’ be the height of the slip gauges and ‘L’ be the distance between roller canters, then the angle is calculated as h sin L 1 h sin L 1 Principle of Sine bar Accuracy requirements of sine bar: The accuracy of sine bar depends on the following constructional features: The rollers must have equal diameter and equal cylinder.
    [Show full text]
  • PRECISION ENGINEERING TOOLS WE HAVE WHAT IT TAKES to EXCEED & EXCEL the Plant
    PRECISION ENGINEERING TOOLS WE HAVE WHAT IT TAKES TO EXCEED & EXCEL The plant. The people. The passion 500,000 sq ft manufacturing | integrated research & development | advanced cnc machining | quality assurance Groz has always exceeded the expectations of tool manufacturers and users the world over. Groz carefully makes each tool under stringent quality control processes that are achieved in a hi-tech manufacturing environment in a 500,000 square foot plant. If you demand quality, trust Groz. ADDITIONS 07 08 Straight Straight & Edge Knife Edges Squares Dear Valued Customer, It is my pleasure to present to you the new catalogue that covers our 13 17 range of Precision Engineering Multi-Use Magnetic Tools. Rule and Compass Gauge We have covered fair ground over the last few years and with our state-of-the art production facility, we can now do much more 22 31 than before. You will see many Electronic Adjustable technologically superior products Edge Finders Vee Block Set as well as modifications to some of the earlier designs, in the following pages. Further, I assure you of the same top performance to which you are accustomed to from Groz. 31 35 Ball Bearing Pot We appreciate your business and Vee Block & Magnets value your loyalty & trust. Clamp Sets Warm Regards, 37 38 Sine Bars Sine Plates ANIL BAMMI Managing Director 46 49 Tweezersezers Tap Wrenchesnches - Prefessionalnal 68 7777 Rotaryry RRapidap Headd AActionct Millingng DDrillri Pressressess VicesVices Machinehine VicesVi CA02 PRECISION ENGINEERING TOOLS 1 Measuring and Marking
    [Show full text]
  • Manufacturing Processes 4-5
    MANUFACTURING PROCESSES 4-5 Virasak Book: Manufacturing Processes 4-5 (Virasak) This text is disseminated via the Open Education Resource (OER) LibreTexts Project (https://LibreTexts.org) and like the hundreds of other texts available within this powerful platform, it freely available for reading, printing and "consuming." Most, but not all, pages in the library have licenses that may allow individuals to make changes, save, and print this book. Carefully consult the applicable license(s) before pursuing such effects. Instructors can adopt existing LibreTexts texts or Remix them to quickly build course-specific resources to meet the needs of their students. Unlike traditional textbooks, LibreTexts’ web based origins allow powerful integration of advanced features and new technologies to support learning. The LibreTexts mission is to unite students, faculty and scholars in a cooperative effort to develop an easy-to-use online platform for the construction, customization, and dissemination of OER content to reduce the burdens of unreasonable textbook costs to our students and society. The LibreTexts project is a multi-institutional collaborative venture to develop the next generation of open-access texts to improve postsecondary education at all levels of higher learning by developing an Open Access Resource environment. The project currently consists of 13 independently operating and interconnected libraries that are constantly being optimized by students, faculty, and outside experts to supplant conventional paper-based books. These free textbook alternatives are organized within a central environment that is both vertically (from advance to basic level) and horizontally (across different fields) integrated. The LibreTexts libraries are Powered by MindTouch® and are supported by the Department of Education Open Textbook Pilot Project, the UC Davis Office of the Provost, the UC Davis Library, the California State University Affordable Learning Solutions Program, and Merlot.
    [Show full text]
  • Mcgraw-Hill Machining and Metalworking
    McGraw-Hill Machining and Metalworking Ronald A. Walsh (deceased) Denis R. Cormier Associate Professor Department of Industrial Engineering North Carolina State University Third Edition McGraw-Hill New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore Sydney Toronto Contents Preface xiii Acknowledgments xiv Introduction xv Chapter 1 Modern Metalworking Machinery, Tools, and Measuring Devices 1.1. Metalworking Process Overview 1 1.1.1. Primary processes 2 1.1.2. Metal- cutting processes 2 1.1.3. Sheet metal parts fabrication methods 7 1.2. Measurement and Gauging 8 1.2.1. Coordinate Measuring Machines (CMMs) 8 1.2.2. Handheld measurement and gauging devices 10 1.3. Statistical Process Control 11 1.3.1. Process capability 11 1.3.2. Control charts 14 ter2 Mathematics for Machinists and Metalworkers 17 2.1. General Mathematics, Algebra, and Trigonometry 17 2.1.1. General mathematics and algebraic procedures 17 2.1.2. Plane trigonometry 19 2.1.3. Important mathematical constants 31 2.1.4. Summary of trigonometric procedures for triangles 31 2.1.5. Powers-of-10 notation 33 2.2. Geometric Principles 34 2.3. Geometric Construction 41 2.4. Mensuration 49 2.5. Percentage Calculations 66 iv Contents 2.6. Decimal Equivalents and Millimeter Chart 69 2.7. Degrees and Radians Chart 70 2.8. Mathematical Signs and Symbols 70 2.9. Greek Alphabet 70 2.10. Sine Bar and Sine Plate Calculations 70 2.11. Solutions to Problems in Machining and Metalworking 77 Chapter 3 U.S. Customary and Metric (SI) Measures and Conversions 85 3.1.
    [Show full text]
  • Metrology and Measurement Laboratory Manual
    JSS MAHAVIDYAPEETHA JSS SCIENCE & TECHNOLOGY UNIVERSITY (JSSS&TU) FORMERLY SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING MYSURU-570006 DEPARTMENT OF MECHANICAL ENGINEERING Metrology and Measurement Laboratory Manual IV Semester B.E. Mechanical Engineering USN :_______________________________________ Name:_______________________________________ Roll No: __________ Sem _ _________ Sec ________ Course Name __________________ ______________ JSS MAHAVIDYAPEETHA Course Code _______________________________ JSSSTU, MYSURU Department of Mechanical Engineering DEPARTMENT OF MECHANICAL ENGINEERING VISION OF THE DEPARTMENT Department of mechanical engineering is committed to prepare graduates, post graduates and research scholars by providing them the best outcome based teaching-learning experience and scholarship enriched with professional ethics. MISSION OF THE DEPARTMENT M-1: Prepare globally acceptable graduates, post graduates and research scholars for their lifelong learning in Mechanical Engineering, Maintenance Engineering and Engineering Management. M-2: Develop futuristic perspective in Research towards Science, Mechanical Engineering Maintenance Engineering and Engineering Management. M-3: Establish collaborations with Industrial and Research organizations to form strategic and meaningful partnerships. PROGRAM SPECIFIC OUTCOMES (PSOs) PSO1 Apply modern tools and skills in design and manufacturing to solve real world problems. PSO2 Apply managerial concepts and principles of management and drive global economic growth. PSO3 Apply thermal,
    [Show full text]
  • Using Forensic Techniques to Further Archeological Inquiry Into Firearms Use
    Historic Rifling Data Characteristics: Using Forensic Techniques to Further Archeological Inquiry into Firearms Use Douglas D. Scott Adjunct Research Faculty Applied Anthropology and Geography Program Colorado Mesa University Prepared for National Park Service National Center for Preservation Technology and Training Grant P17AP00228 This report was developed under a grant from the National Center for Preservation Technology and Training, a unit of the National Park Service. Its contents are solely the responsibility of the author and do not necessarily represent the official position or policies of the National Park Service or the National Center for Preservation Technology and Training. September 2019 Table of Contents Executive Summary ...............................................................................................................iii Introduction ............................................................................................................................1 Theoretical and Methodological Background ........................................................................2 A Brief History of Rifling ......................................................................................................4 Data Collection Methods .......................................................................................................12 3D Scanning ................................................................................................................19 Using the Database ................................................................................................................21
    [Show full text]