PCI Express X4 Card > 2 X Internal M.2 Key B + 1 X Internal Nvme M.2

Total Page：16

File Type：pdf, Size：1020Kb

PCI Express x4 Card > 2 x internal M.2 Key B + 1 x internal NVMe M.2 Key M - Low Profile Form Factor Description This PCI Express card by Delock expands the PC by three M.2 slots. On the card can be connected up to two M.2 SATA modules in format 22110, 2280, 2260, 2242, 2230 and one M.2 PCIe module in format 22110, 2280, 2260, 2242, 2230. The SATA modules will be connected via SATA cables to the motherboard. Specification Item no. 89394 • Connectors: EAN: 4043619893942 internal: 2 x 67 pin M.2 key B slot Country of origin: Taiwan, Republic of 1 x 67 pin M.2 key M slot China 1 x PCI Express x4, V3.0 2 x SATA 6 Gb/s 7 pin receptacle Package: Box 1 x SATA 15 pin power plug • Interface: SATA + PCIe • Supports two M.2 modules in format 22110, 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA and one M.2 module in format 22110, 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe • Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported • Data transfer rate up to 6 Gb/s • Power supply via PCI Express interface or via SATA 15 pin power connector • Supports Native Command Queuing (NCQ) • Supports NVM Express (NVMe) System requirements • Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.2.0 • PC with one free PCI Express x4 / x8 / x16 / x32 slot • One free SATA 7 pin interface for each connected M.2 module based on SATA Package content • PCI Express card • Low profile bracket • 3 x fixing screw © 2021 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, www.delock.de 1 / 2 changes and errors excepted. 89394 25.09.2021 Images © 2021 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, www.delock.de 2 / 2 changes and errors excepted. 89394 25.09.2021 Powered by TCPDF (www.tcpdf.org).

Copy Link

Recommended publications

SAS Enters the Mainstream Although Adoption of Serial Attached SCSI
SAS enters the mainstream By the InfoStor staff http://www.infostor.com/articles/article_display.cfm?Section=ARTCL&C=Newst&ARTICLE_ID=295373&KEYWORDS=Adaptec&p=23 Although adoption of Serial Attached SCSI (SAS) is still in the infancy stages, the next 12 months bode well for proponents of the relatively new disk drive/array interface. For example, in a recent InfoStor QuickVote reader poll, 27% of the respondents said SAS will account for the majority of their disk drive purchases over the next year, although Serial ATA (SATA) topped the list with 37% of the respondents, followed by Fibre Channel with 32%. Only 4% of the poll respondents cited the aging parallel SCSI interface (see figure). However, surveys of InfoStor’s readers are skewed by the fact that almost half of our readers are in the channel (primarily VARs and systems/storage integrators), and the channel moves faster than end users in terms of adopting (or at least kicking the tires on) new technologies such as serial interfaces. Click here to enlarge image To get a more accurate view of the pace of adoption of serial interfaces such as SAS, consider market research predictions from firms such as Gartner and International Data Corp. (IDC). Yet even in those firms’ predictions, SAS is coming on surprisingly strong, mostly at the expense of its parallel SCSI predecessor. For example, Gartner predicts SAS disk drives will account for 16.4% of all multi-user drive shipments this year and will garner almost 45% of the overall market in 2009 (see figure on p. 18).
[Show full text]
Engineering Specifications
DOC NO : Rev. Issued Date : 2020/10/08 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : ENGINEERING SPECIFICATIONS Product Name: CVB-CDXXX (WT) Model CVB-CD128 CVB-CD256 CVB-CD512 CVB-CD1024 Author: Ken Liao DOC NO : Rev. Issued Date : 2020/10/08 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Version History Date 0.1 Draft 2020/07/20 1.0 First release 2020/10/08 DOC NO : Rev. Issued Date : 2020/10/08 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Copyright 2020 SOLID STATE STORAGE TECHNOLOGY CORPORATION Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this datasheet may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of SOLID STATE STORAGE Technology Corporation. DOC NO : Rev. Issued Date : 2020/10/08 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Table of Contents 1 Introduction ....................................................................... 5 1.1 Overview .............................................................................................
[Show full text]
Dell EMC Poweredge RAID Controller S140 User’S Guide Notes, Cautions, and Warnings
Dell EMC PowerEdge RAID Controller S140 User’s Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2019 - 12 Rev. A09 Contents 1 Overview..................................................................................................................................... 6 PERC S140 specifications.....................................................................................................................................................6 Supported operating systems..............................................................................................................................................8 Supported PowerEdge systems.......................................................................................................................................... 9 Supported physical disks...................................................................................................................................................... 9 Management applications for the PERC S140................................................................................................................
[Show full text]
Datasheet (PDF)
DOC NO : Rev. Issued Date : 2020/10/07 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : ENGINEERING SPECIFICATIONS Product Name: CVB-8DXXX-WT Model CVB-8D128- WT CVB-8D256 - WT CVB-8D512- WT CVB-8D1024 - WT Author: Ken Liao DOC NO : Rev. Issued Date : 2020/10/07 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Version History Date 0.1 Draft 2020/03/30 1.0 First release 2020/10/07 DOC NO : Rev. Issued Date : 2020/10/07 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Copyright 2020 SOLID STATE STORAGE TECHNOLOGY CORPORATION Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this datasheet may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of SOLID STATE STORAGE Technology Corporation. DOC NO : Rev. Issued Date : 2020/10/07 V1.0 SOLID STATE STORAGE TECHNOLOGY CORPORATION 司 Revised Date : Table of Contents 1 Introduction ....................................................................... 5 1.1 Overview .............................................................................................
[Show full text]
3.5-Inch, SAS 15K Enterprise Hard Disk Drives MAX3036RC • MAX3073RC • MAX3147RC
Storage High performance and high capacity for your mission critical storage applications. 3.5-Inch, SAS 15K Enterprise Hard Disk Drives MAX3036RC • MAX3073RC • MAX3147RC State-of-the-art hard disk drives for your most demanding enterprise applications 3.5-inch RoHS compliant enterprise hard disk drives offer 15K RPM spindle speed and feature storage capacities up to 147GB1 Ideal for applications requiring high performance and high bandwidth Native Command Queuing (NCQ), providing faster execution of operation commands Uses smaller connectors and cables than U320, a benefit acknowledged by the SCSI Trade Association (STA) Point-to-point connection allows for improved input-output per second (IOPS) in proportion to the number of drives connected 1 One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting. 3.5-Inch, SAS 15K Enterprise Hard Disk Drives MAX3036RC • MAX3073RC • MAX3147RC 3.5-Inch, SAS 15K RPM Series Hard Disk Drive Specifications With more than 35 years of experience in hard disk Description MAX3036RC MAX3073RC MAX3147RC drive technology, Fujitsu can offer state-of-the-art Functional Specifications hard disk drives for your most demanding enterprise Storage capacity (formatted)1 36.7 GB 73.5 GB 147.0 GB applications. Our latest SAS offering is another Disks 1 2 4 Heads (read/write) 2 4 8 example, building on our market leadership in the Bytes/sector 512 Seek time Track to track Read: 0.2 ms (typ.) / Write: 0.4 ms (typ.) exploding SAS market. Average Read: 3.3 ms (typ) / Write: 3.8 ms (typ) The availability of this latest SAS offering Full track Read: 8.0 ms (typ) / Write: 9.0 ms (typ) Average latency time 2.00 ms solidifies Fujitsu as the SAS leader for all form factors Rotational speed (RPM) 15,000 in the enterprise market, reflecting a determination Areal density 59 Gbits/sq.
[Show full text]
Run-Time Detection of Protocol Bugs in Storage I/O Device Drivers Domenico Cotroneo, Luigi De Simone, Roberto Natella
1 Run-Time Detection of Protocol Bugs in Storage I/O Device Drivers Domenico Cotroneo, Luigi De Simone, Roberto Natella Abstract—Protocol violation bugs in storage device drivers are necessarily lead to such symptoms. The lack of detection can a critical threat for data integrity, since these bugs can silently lead to silent corruptions of users’ data, thus exacerbating the corrupt the commands and data flowing between the OS and cost of software failures. storage devices. Due to their nature, these bugs are notoriously difficult to find by traditional testing. In this paper, we propose In this paper, we propose a novel approach for detecting I/O a run-time monitoring approach for storage device drivers, in protocol violations in storage device drivers, by monitoring at order to detect I/O protocol violations that would otherwise run-time the interactions between the driver and the hardware silently escalate in corruptions of users’ data. The monitoring device controller. The purpose of the run-time monitor is to de- approach detects violations of I/O protocols by automatically learning a reference model from failure-free execution traces. The tect device driver failures in a timely manner. This solution is approach focuses on selected portions of the storage controller meant both to users and engineers of high-availability storage interface, in order to achieve a good trade-off in terms of low systems, including: administrators and end-users of the system, performance overhead and high coverage and accuracy of failure which need to get alarms about the onset of data corruptions in detection.
[Show full text]
Delock PCI Express X16 Card to 1 X M.2 Key B + 1 X Nvme M.2 Key M + 1 X Msata - Low Profile Form Factor
Delock PCI Express x16 Card to 1 x M.2 Key B + 1 x NVMe M.2 Key M + 1 x mSATA - Low Profile Form Factor Description This PCI Express card by Delock expands the PC bytwo M.2 slots as well as an mSATA slot. One M.2 SATA module can be connected in format 2280, 2260, 2242, 2230 with this card and connected via SATA cable to the motherboard. Furthermore, oneM.2 NVMe / PCIe module in format 2280, 2260, 2242, 2230 can be connected. Additionally, one mSATA memory can be connected via SATA cable to the motherboard. All slots can be used separate or at the same time. Specification Item no. 90486 • Connectors: EAN: 4043619904860 1 x 67 pin M.2 key B slot 1 x 67 pin M.2 key M slot Country of origin: China 1 x mSATA slot (full size) 1 x PCI Express x16, V4.0 Package: • Retail Box 2 x SATA 6 Gb/s 7 pin plug • Interface: PCIe / SATA • Supports one M.2 module in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA and one M.2 module in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe • Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported • 3 x LED indicator • Bootable • Supports NVM Express (NVMe) • Supports Native Command Queuing (NCQ) • Supports S.M.A.R.T. • Supports TRIM • Supports DevSleep • Hot Swap System requirements • Linux Kernel 4.6.4 or above • Windows 8.1/8.1-64/10/10-64 • PC with one free PCI Express x16 / x32 slot Package content • PCI Express card • Low profile bracket • 2 x SATA cable, length ca.
[Show full text]
SATA Multi Level Cell SSD for Use in Embedded Computing
Avnet Embedded. Support Around The Board™ Device Specification. DeLKIN DEVICES SSD-MLC www.avnet-embedded.eu SATA SSD Overview Features The Delkin Palladium™ SATA SSDs provide large capacity ▪ Drop-in replacement for 2.5 & 1.8 inch SATA HDD and high speed performance while improving system ▪ Boot from Windows 98/2000/XP/Vista/7 and Linux responsiveness in the standard 2.5 and 1.8 inch form ▪ Serial ATA Interface: SATA 3.0Gb/s factors. Product dependability is guaranteed using leading ▪ Fully compatible with ATA-7; Standard PIO 0-4 edge flash controller designs, MLC NAND Flash, premium ▪ SMART, TRIM & Secure Erase Support components and enhanced feature sets. The Palladium SSD ▪ NSA 9-12 Compliant product platform is targeted for SATA based client PCs, ▪ Low power consumption rugged mobile devices, medical devices, military, aerospace ▪ Supports Native Command Queuing (NCQ) and a variety of embedded system OEM applications. MLC NAND flash has the benefit of being a more cost effective solution compared to SLC due to the denser Specifications storage method used. Compared to HDDs, SSDs have much faster random access, silent operation and lower Capacity 8GB to 256GB* power consumption. With no moving parts, SATA SSDs Form Factor 2.5” Type (100.0 x 70.0 x 9.5 min)1.8” allow for faster start up, lower latency, consistent read Type (78.0 x 54.0 x 5 min) performance, and a higher reliability by eliminating the Host Interface Serial ATA interface of 3.0Gb/s risk of mechanical failures. Fully complies with ATA-7 Specification NOTICES: Product information, pricing and availability are subject to change at any time without notice.
[Show full text]
Intel® SSD DC S3700 Product Specification
Intel® Solid-State Drive DC S3700 Product Specification Capacity: 2.5-inch : 100/200/400/800 GB Power Management 1.8-inch : 200/400 GB − 2.5 inch: 5 V or 12 V SATA Supply Rail9 Components: − 1.8 inch: 3.3 V SATA Supply Rail − Intel® 25nm NAND Flash Memory − SATA Interface Power Management − High Endurance Technology (HET) Multi-Level Cell − OS-aware hot plug/removal (MLC) − Enhanced power-loss data protection Form Factor: 2.5- and 1.8-inch Power10 − Active: Up to 6 W (TYP) Read and Write IOPS1,2 (Full LBA Range, Iometer* Queue Depth 32) − Idle: 650 mW Weight: − Random 4 KB3 Reads: Up to 75,000 IOPS − 2.5” 200,400,800 GB: 73.6 grams ± 2 grams − Random 4 KB Writes: Up to 36,000 IOPS − 2.5” 100 GB: 70 grams ± 2 grams − Random 8 KB3 Reads: Up to 47,500 IOPS − 1.8” 200, 400 GB: 49 grams ± 2 grams − Random 8 KB Writes: Up to 20,000 IOPS Temperature 1 Bandwidth Performance o o − Operating: 0 C to 70 C 4 − Sustained Sequential Read: Up to 500 MB/s 11 o o − Non-Operating : -55 C to 95 C − Sustained Sequential Write: Up to 460 MB/s − Temperature monitoring and logging 5 Endurance: 10 drive writes per day for 5 years − Thermal throttling Latency (average sequential) Shock (operating and non-operating): − Read: 50 µs (TYP) − 1,000 G/0.5 msec − Write: 65 µs (TYP) Vibration 6,8 Quality of Service − Operating: 2.17 GRMS (5-700 Hz) − Read/Write: 500 µs (99.9%) − Non-operating: 3.13 GRMS (5-800 Hz) 7,8 Performance Consistency Reliability Read/Write: Up to 90%/90% (99.9%) − Uncorrectable Bit Error Rate (UBER): AES 256-bit Encryption 1
[Show full text]
Operating Systems
Operating Systems − they will be added as we go • you can also use slides from previous years Petr Ročkai − they are already in study materials − but: not everything is covered in those These are draft (work in progress) lecture notes for PB152. It is expected to be gradually ��illed in, hopefully before the semester You are reading the lecture notes for the course PB152 Operating ends. For now, it is mostly a printable version of the slides. Systems. This is a supplementary resource based on the lecture Organisation slides, but with additional details that would not it into the slide format. These lecture notes should be self-contained in the sense • lectures, with an optional seminar that they only rely on knowledge you have from other courses, • written exam at the end like PB150 Computer Systems (or PB151) or PB071 Principles of − multiple choice Low-Level programming. Likewise, being familiar with the topics − free-form questions covered in these lecture notes is suficient to pass the exam. • 1 online test mid-term, 1 before exam − mainly training for the exam proper Books The written exam will consist of two parts, a multiple-choice test • there are a few good OS books (with exactly one correct answer on each question) and a free- • you are encouraged to get and read them form question. Additionally, you will be required to pass a mid- term test with the same pool of multiple-choice questions. The • A. Tanenbaum: Modern Operating Systems question pool is known in advance: both the entire mid-term and • A.
[Show full text]
AT Attachment 8
Working Draft Project American National T13/2161-D Standard Revision 5 October 28, 2013 Information technology - ATA/ATAPI Command Set - 3 (ACS-3) This is a draft proposed American National Standard of Accredited Standards Committee INCITS. As such this is not a completed standard. The T13 Technical Committee may modify this document as a result of comments received during public review and its approval as a standard. Use of the information contained here in is at your own risk. Permission is granted to members of INCITS, its technical committees, and their associated task groups to reproduce this document for the purposes of INCITS standardization activities without further permission, provided this notice is included. All other rights are reserved. Any commercial or for-profit replication or republication is prohibited. T13 Technical Editor: Ralph O. Weber Western Digital Technologies, Inc. 18484 Preston Road, Suite 102, PMB 178 Dallas, TX 75252 USA Telephone: 214-912-1373 Email: [email protected] Reference number ISO/IEC xxxx-xxx:200x ANSI INCITS 522-201x T13/2161-D Revision 5 October 28, 2013 Points of Contact T13 Chair T13 Vice-Chair Dan Colgrove Jim Hatfield Toshiba America Electronic Components, Inc. Seagate Technology 2590 Orchard Parkway 389 Disc Drive San Jose, CA 95131 Longmont CO 80503 Tel: 408-526-2563 Tel: 720-684-2120 INCITS Secretariat INCITS Secretariat Tel: 202-737-8888 1101 K Street NW Suite 610 Fax: 202-638-4922 Washington, DC 20005 Email: [email protected] T13 Reflector See the T13 Web Site at http://www.t13.org for
[Show full text]
Intel® Solid State Drive E 5410S Series Advance Product Specification
Intel® Solid State Drive E 5410s Series Product Specification Capacity: Power Management 80GB, 120GB 5V or 5V+12V SATA Supply Rail11 Components: SATA Interface Power Management 16nm NAND Flash Memory OS-aware hot plug/removal Standard Endurance Technology (SET) Enhanced power-loss data protection feature Multi-Level Cell (MLC) Power12 Form Factor: 2.5–inch Active: Up to 2.2 W7 (TYP) Read and Write IOPS1,2 (Full LBA Range, IOMeter* Queue Depth 32) Idle: 600 mW Random 4KB3 Reads: Up to 68,000 IOPS Weight: Random 4KB Writes: Up to 8,400 IOPS 63 grams ± 2 grams Random 8KB3 Reads: Up to 46,000 IOPS Temperature Random 8KB Writes: Up to 4,200 IOPS Operating: 0° C to 70° C 1 Bandwidth Performance Non-Operating13: -55° C to 95° C Sustained Sequential Read: Up to 475 MB/s4 Temperature monitoring and logging Sustained Sequential Write: Up to 135 MB/s Thermal throttling when approaching 5 Endurance: 0.3 drive writes per day for 5 years maximum operating temperature 80GB: 45 TBW 120GB: 70 TBW Shock (operating and non-operating): 1,000 G/0.5 ms Latency (average sequential) Read: 55 µs (TYP) Vibration Write: 66 µs (TYP) Operating: 2.17 GRMS (5-700 Hz) Quality of Service6,7 Non-Operating: 3.13 GRMS (5-800 Hz) Read/Write: 500 µs / <5 ms (99.9%) Reliability Performance Consistency7,8 Uncorrectable Bit Error Rate (UBER): Read/Write: Up to 95%/95% (99.9%) 1 sector per 1017 bits read AES 256-bit Encryption Mean Time Between Failures (MTBF): 2 million hours Altitude9 End-to-End data protection Operating: -1,000 to 10,000 ft
[Show full text]