Final DRAFT - CISCO CONFIDENTIAL

Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.5 for Japan (Release Version 17.5 ) First Published: 2021-01-19 Last Modified: 2021-06-16

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA95134- 1 7 0 6 USA http://www. cisco.com Tel: 408 526-4000 800 553-NET S (6387) Fax: 408 527-0883

© Cisco Systems, Inc. All rights reserved.

C O N T E N T S

C H A P T E R 1 Overview 1

Catalyst 9800 and EWC test 1

C H A P T E R 2 Test Topology and Environment Matrix 7

Test Topology 7 Component Matrix8

What's New ? 10

Open Caveats 11 Resolved Caveats 13

C H A P T E R 3 New Features 15 Image Upgrade Data Models for Controller 15 11ax Advanced traffic based scheduler for scheduling (9105/9115/9120) 18 11ax OFDMA Support for EWC 24 Called Station ID with AP Ethernet MAC 27 RRM assurance for granular reasons for power and channel change 31 Adaptive Load Based EDCA Parameter 35

Umbrella Enhancements 37 11ax BSS Coloring(OBSS PD) on 9105/9115/9120 APs 40 Easy PSK:WLAN Client Onboarding w/o registration 42 Application Experience Support on IOS-XEWireless Platforms 46 Enabling Packet trace and conditional debug in eWLC 9800-CL 47 Client Debug Bundle 49 ICAP Support for C9130 fo 8 users 50 11ax OFDMA Support for EWLC 52 Capability to enable/disable 11axfeatures per SSID 55

Conte nts

REVIEW DRAFT - CISCO CONFIDENTIAL

HA Management Enhancements 56 Standby Monitoring Enhancements 58 ISSU Data Model Support 60 Rejection of Wrong WLAN ID 61 Error Propagation for Exec Commands 66

CHAPTER 4 Regression Features - Test Summary 67 APSP/APDP WebUI support 68 Fabric In A Box (webUI for Embedded Wireless on 9k Switches ) 69 WGB client support on ME 71 PSK + Multi-auth Support for EWC 75 EoGRE Support for ME 77 iPSK Peer-2-Peer Blocking 78 BSS Coloring on AX APs 92 CMX Parity for eWLC ME 94 EWC Day0 Support 96 TACACS 98 Mac filtering (for L2 security) 100 Internal DHCP Server 101 802.1x on Wave 2 AP( EAP-TLS & PEAP) 102 Optimized Roaming 104 ICAP Support for C9130 106 mDNS gateway support for flex/Mobility Express 108 200 Country Code 110 Explicit warning for configuration-triggered downtime 111 Client Debug Bundle for EWC 113 Active Config Visualization 114 Copy of webauth tar bundle in EWC HA setup 115 WGB support on EWC 116 Ethernet VLAN tag on AP 120 Smart Licensing 123 Multi LAG and Load Balance 123 AdvAP_QBSS_MCAST 124 OKC 127

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) vi

REVIEW DRAFT - CISCO CONFIDENTIAL

TWT support on Axel AP 130

WPA3 Support 130 Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's 133 mDNS Support for Wired Guest Ac 136 PSK + Multi-auth Support 137 Inter Release Controller Mobility 139 ISSU Enhancement(Zero downtime for Wireless N/W) 143 Syslogs 144 CWA (Central Web Authentication) 145 CMX Support for EWLC 147 MC2UC (Videostreaming) 149 UL/DL OFDMA Support for 9130 151 Out of band access to standby 151 RLAN Support for Fabric and across all modes in IOS-XE 152 COS AP Packet Tracer 155 DL 11ax Mu-MIMO for (VC/SS) AP's 157 Web UI for Golden monitor for Packet drops 160 WGB Support for C9115 /9105AXI AP 162 Dynamic Protocol Pack Upgrade - WLC and AP 164 HA SSO RMI 168 Best Practices WebUI 170 Open dns 171 Config Wireless 172 SR Cases 173

CHAPTER 5 Related Documentation 187 Related Documentation 187

Conte nts

REVIEW DRAFT - CISCO CONFIDENTIAL

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) vi

C H A P T E R 1

Overview

• Catalyst 9800 and EWC test , on page 1

Catalyst 9800 and EWC test Cisco Catalyst 9800 and EWC test , an integral part of the enterprise wireless solution, is a program that validates various Cisco Wireless Products and Features. This is achieved by testing the latest versions of Cisco wireless products Cisco Catalyst 9800 and EWC for Japan , in turn is an add-on testing at the solution level, where the requirements gathered are specific to Japanese usage and market. The requirements are derived based on the following: • New features in Catalyst 9800 and EWC 17.5 • High priority scenarios and basic regression features • Inputs from Cisco SEs/ TAC

The test execution is carried out on selected Cisco Wireless LAN products, which affect the Japanese segment that are prioritized by Cisco Japan team. The following products are covered in the test execution: • Cisco Catalyst 9800 Series Wireless Controller • Cisco Virtual Elastic Wireless LAN Controller 9800 • Cisco Catalyst 9800-CL • Cisco Embedded Wireless Controller on Catalyst Access Points • Cisco Digital Network Architecture Center • Cisco DNA Spaces • Cisco DNA Connector

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) vii

Ove rvie w Catalyst 9800 and EWCtest

REVIEW DRAFT - CISCO CONFIDENTIAL

• Connected Mobile Experiences (CMX) • Cisco Prime Infrastructure (Physical-UCS,VM) • ISE(VM) • Cisco ISR 1100 • Cisco AP c9115 • Cisco AP c9120 • Cisco AP c9130 • Access Point 4800 • Access Point 3800 • Access Point 2800 • Access Point 3700 • Access Point 2700 • Access Point 1700 • Access Point 1570 • Access Point 1542 • Access Point 1530 • Access Point 702I • Access Point 1850 • Access Point 1830 • Access Point 1815I • Access Point 1815W • Access Point 1810

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 2

Ove rvie w Catalyst9800 and EWCtest

REVIEW DRAFT - CISCO CONFIDENTIAL

Acronyms

Acronym Description AAA Authentication Authorization and Accounting ACL Access Control List ACS Access Control Server AKM Authentication Key Management AP Access Point API Application Programming Interface APIC-EM Application Policy Infrastructure Controller - Enterprise Module ATF Air-Time Fairness AVC Application Visibility and Control. BGN Bridge Group Network BLE Bluetooth Low Energy BYOD Bring Your Own Device CA Central Authentication CAC Call Admissions Control CAPWAP Control and Provisioning of Wireless Access Point CCKM Cisco Centralized Key Management CCN Channel Change Notification CCX Cisco Compatible Extensions CDP Cisco Discovery Protocol CKIP Cisco Key Integrity Protocol CMX Connected Mobile Experience CVBF Cisco Vector Beam Forming CWA Central Web Authentication DCA Dynamic Channel Assignment DMZ Demilitarized Zone DNS Domain Name System DNA-C Digital Network Architecture Center DNA-Cloud Digital Network Architecture Cloud DTIM Delivery Traffic Indication Map DSCP Differentiated Services Code Point DTLS Datagram Transport Layer Security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 3

Ove rvie w Catalyst 9800 and EWCtest

REVIEW DRAFT - CISCO CONFIDENTIAL

Acronym Description EAP Extensible Authentication Protocol EULA End User Licence Agreement EWC Embedded Wireless Controller FLA Flex Local Authentication FLS Flex Local Switching FT Fast Transition FTP File Transfer Protocol FW Firm Ware HA High Availability H-REAP Hybrid Remote Edge Access Point IOS Internetwork Operating System ISE Identity Service Engine ISR Integrated Services Router LAG Link Aggregation LEAP Lightweight Extensible Authentication Protocol LSS Location Specific Services LWAPP Lightweight Access Point Protocol MAP Mesh Access Point MCS Modulation Coding Scheme MFP Management Frame Protection mDNS multicast Domain Name System MIC Message Integrity Check MSE Mobility Service Engine MTU Maximum Transmission Unit NAC Network Admission Control NAT Network Address Translation NBAR Network Based Application Recognition NCS Network Control System NGWC Next Generation Wiring closet NMSP Network Mobility Services Protocol OEAP Office Extended Access Point PEAP Protected Extensible Authentication Protocol

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 4

Ove rvie w Catalyst9800 and EWCtest

REVIEW DRAFT - CISCO CONFIDENTIAL

Acronym Description PEM Policy Enforcement Module PI Prime Infrastructure PMF Protected Management Frame POI Point of Interest PPPoE Point-to-Point Protocol over Ethernet PSK Pre-shared Key QOS Quality of service RADIUS Remote Authentication Dial-In User Service RAP Root Access Point RP Redundancy Port RRM Radio Resource Management SDN Software Defined Networking SOAP Simple Object Access Protocol SFTP Secure File Transfer Protocol SNMP Simple Network Management Protocol SS Spatial Stream SSID Service Set Identifier SSO Single Sign On SSO Stateful Switch Over SWIM Software Image Management TACACS Terminal Access Controller Access Control System TCP Transmission Control Protocol TFTP Trivial File Transfer Protocol TLS Transport Layer Security UDP User Datagram Protocol vWLC Virtual Wireless LAN Controller VPC Virtual port channel VPN Virtual Private Network WEP Wired Equivalent Privacy WGB Workgroup Bridge wIPS Wireless Intrusion Prevention System WLAN Wireless LAN

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 5

Ove rvie w Catalyst 9800 and EWCtest

REVIEW DRAFT - CISCO CONFIDENTIAL

Acronym Description WLC Wireless LAN Controller WPA Wi-Fi Protected Access WSM Wireless Security Module

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 6

C H A P T E R 2

TestTopologyandEnvironment Matrix

• Test Topology, on page 7 • Component Matrix, on page 8 • What's New ?, on page 10 • Open Caveats, on page 11 • Resolved Caveats, on page 13

Test Topology

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 7

TestTopology and Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

Component Matrix

Category Component Version Controller Cisco Elastic Wireless LAN 17.5 Controller 9800 Cisco Virtual Elastic Wireless 17.5 LAN Controller 9800 Cisco Catalyst 9800-L Wireless 17.5 Controller Cisco Embedded Wireless 17.5 Controller on Catalyst Access Points Applications DNAC 2.2.2 DNA Spaces Cloud(Dec 2020) DNA spaces connector 2.2.295 ISE(VM) 3.0.0.393 CMX(Physical (3375), VM) 10.6.2 Prime Infrastructure (Virtual 3.9.0.0 Appliance, UCS based) MSE(Physical (3365), VM) 8.0.150.0 Cisco Jabber for Windows, 12.6.0 iPhone Cisco Air Provisioning App 1.4 Cisco Wireless App 1.0.228

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 8

TestTopologyand Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

Category Component Version Access Point Cisco AP 9115 17.5 Cisco AP 9120 17.5 Cisco AP 9130 17.5 Cisco 1100 ISR 17.5 Cisco AP 4800 15.3 Cisco AP 3800 15.3 Cisco AP 2800 15.3 Cisco AP 3700 15.3 Cisco AP 2700 15.3 Cisco AP 1700 15.3 Cisco AP 1850 15.3 Cisco AP 1830 15.3 Cisco AP 1815 15.3 Cisco AP 1810 15.3 Cisco AP 1570 15.3 Cisco AP 1562 15.3 Cisco AP 1542 15.3 Cisco AP 1532 15.3 Cisco AP 702I 15.3 Switch Cisco Cat 9300 17.5 Cisco Cat 9200L 17.5 Cisco Cat 9600 17.5 Cisco 3750V2 switch 15.0(2)SE2 Cisco Cat 6509-E 15.1(1)SY1 Chipset 5300, 6300 AGN 15.40.41.5058 7265 AC 21.40.2 Airport Extreme 7.9.1

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 9

TestTopology and Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

Category Component Version Client Operating System(JOS) Windows 8 & 8.1 Enterprise Windows XP Professional Windows 10 Apple Mac Book Pro, Apple Mac Mac OS 11.1 Book Air (JP Locale) iPad Pro iOS 14.3 iPhone 6, 6S ,7 & 11 (JP Locale) iOS 14.3 Samsung Galaxy S7,S10, Nexus Android 10.0 6P, Sony Xperia XZ Wireless IP Phone 8821 11.0.4-14 End points Windows 7 Enterprise Apple Mac 10.15 Windows 8 & 8.1 iPhone 6,6S ,7 ,10 & 11 Windows 10 Samsung Galaxy S4, S7,S10, Nexus 6P, Sony Xperia Cisco AnyConnect VPN Client 4.9.01095 MS surface GO Windows 10 Module Hyper location Module NA Active Directory AD Windows server 2019 Call Control Cisco Unified Communications 12.5.0.99832-3/12.5.0.99832-3-1(JP) Manager Browsers IE 11.0 Mozilla Firefox 84.0.2 Safari 14.0.2 Chrome 88.0.4324.96

What's New ?

Cisco Catalyst 9800 Series Wireless Controller • Adapative Load EDCA Parameter(Giga School) • Umbrella Enhancements

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 10

TestTopologyand Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

• 11ax BSS Coloring(OBSS PD) on 9105/9115/9120 APs • Easy PSK:WLAN Client Onboarding w/o registration • Application Experience Support on IOS-XEWireless Platforms • Enabling Packet trace and conditional debug in eWLC 9800-CL • Client Debug Bundle for EWLC • ICAP Support for C9130 fo 8 users • Capability to enable/disable 11axfeatures per SSID • HA Management Enhancements • Standby Monitoring Enhancements • ISSU Data Model Support • Rejection of Wrong WLAN ID • Error Propagation for Exec Commands

EWC • Image Upgrade Data Models for Controller • 11ax Advanced traffic based scheduler for scheduling SU, OFDMA and MU traffic on 9105/9115/9120 • 11ax OFDMA Support for EWC (8Users UL, 16Users DL) on 9105/9115/9120 • Called Station ID with AP Ethernet MAC • RRM assurance for granular reasons for power and channel change

TestTopology and Environment Matrix

Open Caveats

Defect ID Title CSCvx06924 Yang/SNMP validation to be in parity with CLI for high throughput configuration CSCvw39897 Password is visible for user accounts in Edge Browser CSCvw55858 In ISE Endpoint Details Called Station ID is displayed as SSID CSCvw60007 9800 Ap: debug all crashed multiple crash files with crash loop eg, nginx_pman

CSCvx02724 Able to configure ethernet vlan-tag for internal APs in CLI CSCvx02719 Able to configure ethernet vlan-tag for internal APs in UI (W on CSCvx02724) CSCvw87776 PSK and CCKM should not configure at the same time for WLAN CSCvw49202 9800 Best practice UI Validation on Secure HTTP not handled properly CSCvw63135 Not able to upload the core files on Cisco Catalyst 9800-L Wireless Controller CSCvw84280 Client is getting connected without enabling aes/tkip cipher for WPA security CSCvw67337 Time Zone is not updating in EWC platforms

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 12

TestTopologyand Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

Resolved Caveats

Defect ID Title CSCvw89218 Web UI validation for dot11 options in high throughput page needs to be implemented with CLI behavior CSCvw33112 Unable to configure default easy psk wlan in Japanese CSCvw56501 Umbrella: Getting an error message while deleting Registration Token CSCvw39891 No option to enable Easy-PSK in Auth Key Management CSCvw48905 Webpage loading issue in Threat Defense page

CSCvw34169 Unable to disable Best Channel Width in Best Practices CSCvw98445 Webui - Threshold information is not showing in Temperature Tooltip CSCvw82747 Database Memory Leak detected after enabling Umbrella Registration Token CSCvw47728 Unable to see Auth Key Management parameters in WPA3 CSCvw93332 In LLDP neighbors page on Clicking "click here" option in to enable LLDP, it redirects to dashboard

CSCvw90384 Flex NAT/PAT should enable only after enabling Local Switching CSCvx05194 Kendo upgrade : Checkboxstatus for WLAN PSK incorrect CSCvw49781 Authentication Key Details data not found in Administration->Time CSCvw51771 EWLC - UI issues observed in SNMP page CSCvw36834 Button overlap observed in country code page - Japanese locale CSCvw49046 9800 - Access points page details are hidden and cannot be viewed completely CSCvw37154 Unable to configure wlan in Chrome and Edge Browser

CSCvw54792 Webpage loading issue observed in Policy Page

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 13

TestTopology and Environment Matrix

REVIEW DRAFT - CISCO CONFIDENTIAL

CSCvw52922 WLAN Easy-PSK Layer 3 profile creation gets failed in Japanese

CSCvw66688 When updating Packet capture name, new packet capture gets created instead of updating existing name CSCvw74976 Unable to map layer2 security parameter in policy page CSCvw97402 404 Not Found Error showing most of the links in Online help content CSCvx02828 Not able to apply Client Exclusion Policies properly

CSCvx03669 MESH PSK: Cancel/Apply button to edit changes in Keys Configuration hidden behind scroll

CSCvw29281 Username is showing as 'webui' by default at the time of logging in CSCvw82663 When trying to update radio setting in GUI , an error message is pop's up

CSCvw96999 In Switch/eWC/eWLC DHCP Configured in CLI are not reflecting properly in WebUI

CSCvw87235 In AAA Wizard Advanced, only Basic settings can be seen - EWC platforms CSCvw69154 Preferred Active cannot be configured in EWC CSCvw38909 Alignment issue in controller Japanese in chrome and edge browser CSCvw34873 Dark Mode - Footer background issue in Licensing page CSCvw29269 Controller is logging off automatically after deleting any user account from User Admin in JA

CSCvw60065 Easy-PSK option should be hide in EWC platforms

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 14

CSCvw47601 Unable to Enable Lobby admin access in WLAN

CSCvw29392 Username is predefined in eWLC after upgrading to 17.5 CSCvw53503 Lobby admin access check boxis disabled automatically in wlan profile page even after enabling it CSCvw97495 Client is connecting via 11ac protocol even when it is disabled CSCvw38916 Does not show SUCCESS/FAILURE when fixing in Disable Management over Wireless

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 15

TestTopology and Environment Matrix

C H A P T E R 3

New Features

• Image Upgrade Data Models for Controller, on page 15 • 11ax Advanced traffic based scheduler for scheduling (9105/9115/9120), on page 18 • 11ax OFDMA Support for EWC, on page 24 • Called Station ID with AP Ethernet MAC, on page 27 • RRM assurance for granular reasons for power and channel change, on page 31 • Adaptive Load Based EDCA Parame, on page 35 • Umbrella Enhancements, on page 37 • 11ax BSS Coloring(OBSS PD) on 9105/9115/9120 APs, on page 40 • Easy PSK:WLAN Client Onboarding w/o registration, on page 42 • Application Experience Support on IOS-XEWireless Platforms , on page 46 • Enabling Packet trace and conditional debug in eWLC 9800-CL, on page 47 • Client Debug Bundle, on page 49 • ICAP Support for C9130 fo 8 users, on page 50 • 11ax OFDMA Support for EWLC, on page 52 • Capability to enable/disable 11axfeatures per SSID, on page 55 • HA Management Enhancements, on page 56 • Standby Monitoring Enhancements, on page 58 • ISSU Data Model Support, on page 60 • Rejection of Wrong WLAN ID, on page 61 • Error Propagation for Exec Commands , on page 66

Image Upgrade Data Models for Controller

Logical ID Title Description Status Defect ID EWCJ175S_IUD_01 Verify Netconf programmable support for ap Passed whether AP image predownload image gets predownloaded or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 16

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_IUD_02 Verify Netconf programmable support for ap Passed whether image predownload with SSO AP image Switchover predow nlo ad completed or not EWCJ175S_IUD_03 Verify Netconf programmable support for ap Passed whether image predownload abort AP image predownlo ad abort or not EWCJ175S_IUD_04 Verify AP Netconf programmable support for ap Passed image image predownload statistics predownlo ad statistics EWCJ175S_IUD_05 Verif Netconf programmable support for show Passed y install rollback, rollback id wheth er rollback, rollback id details correct or not EWCJ175S_IUD_06 Verify Netconf programmable support for show Passed rollback install profile, profile profile inform atio n correct or not EWCJ175S_IUD_07 Verify AP Netconf programmable support for show Passed image and ap image, show ap image file summary AP image file summary correct or not EWCJ175S_IUD_08 Verify Netconf programmable support for show Passed whether AP ap upgrade, show ap upgradesummary, upgrade show ap upgrade name image details showing correctly or not

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 17

New Features EWCJ175S_IUD_09 Verify Predownload async notification - Passed whether INSTALL_AP_IMAGE_PRE_DWNLD_INITIATED async notific ation from netconf server generating or not when ap predownlo ad is initiated

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 18

New Features

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 17

New Features

R ERVEIVIEEWW DRAAFTF T- C-ICSCI OS CONCFIODNE NFTIIDALEN TIA L

EWCJ175S_IUD_10 Verify Predownload async notification - Passed whether async INSTALL_AP_IMAGE_PRE_DWNLD_IN_PROGRESS notification from netconf server generating or not when ap predownload is inprogress EWLCJ175S_IUD Verify Netconf programmable support for ap Passed _01 whether AP image predownload image gets predownloaded or not EWLCJ175S_IUD Verify Netconf programmable support for ap Passed _02 whether AP image predownload with SSO image Switchover predownload completed or not EWLCJ175S_IUD Verify Netconf programmable support for ap Passed _03 whether AP image predownload abort image predownload abort or not EWLCJ175S_IUD_0 Verify AP Netconf programmable support for ap Passed 4 image image predownload statistics predownload statistics EWLCJ175S_IUD Verify Netconf programmable support for show Passed _05 whether install rollback, rollback id rollback, rollback id details correct or not EWLCJ175S_IUD Verify Netconf programmable support for show Passed _06 rollbac k install profile, profile profile information correct or not EWLCJ175S_IUD Verify AP Netconf programmable support for show Passed _07 image and AP ap image, show ap image file summary image file summary correct or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 18

New Features

EWLCJ175S_IUD_08 Verify Netconf programmable support for show Passed whether AP ap upgrade, show ap upgrade summary upgrade show ap upgrade name image details showing correctly or not EWLCJ175S_IUD_09 Verify Predownload async notification - Passed whether INSTALL_AP_IMAGE_PRE_DWNLD_INITIATED async notification from netconf server generating or not when ap predownload is initiated EWLCJ175S_IUD_10 Verify Predownload async notification - Passed whether INSTALL_AP_IMAGE_PRE_DWNLD_IN_PROGRESS async notification from netconf server generating or not when ap predownload is inprogress

11ax Advanced traffic based scheduler for scheduling (9105/9115/9120)

Logical ID Title Description Status Defect ID EWCJ175S_11ax_ATBS_01 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 5Ghz band. 5Ghz band. EWCJ175S_11ax_ATBS_02 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 17

New Features 11ax Advance d traffic based scheduler forscheduling (9105/9115/ 9120)

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_11ax_ATBS_03 Monitor traffic To verify OFDMA Failed CSCvx06924 with 11ax Android details with 11ax client connected. Android client connected. EWCJ175S_11ax_ATBS_04 Monitor traffic To verify OFDMA Passed with 11ax iPhone details with 11ax client connected. iPhone client connected. EWCJ175S_11ax_ATBS_05 Monitor traffic To verify OFDMA Passed with non 11ax details with non Windows client 11ax Windows connected. client connected. EWCJ175S_11ax_ATBS_06 Monitor traffic To verify OFDMA Passed with non 11axMac details with non client connected. 11ax Mac client connected. EWCJ175S_11ax_ATBS_07 Monitor traffic by To verify OFDMA Passed connecting client details by to 2.4Ghz radio. connecting client to 2.4Ghz radio. EWCJ175S_11ax_ATBS_08 Verify OFDMA To verify OFDMA Failed CSCvw87776 details with client details with client connecting to connecting to WPA2 - PSK WPA2 - PSK configured WLAN configured WLAN EWCJ175S_11ax_ATBS_09 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA3 - Dot1x WPA3 - Dot1x configured WLAN configured WLAN EWCJ175S_11ax_ATBS_10 Connect upto 8 To connect upto 8 Passed clients and monitor clients and monitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWCJ175S_11ax_ATBS_11 Modify spatial To modify spatial Passed streamconfig to 1 streamconfig to 1 streamand monitor streamand monitor OFDMA statistics. OFDMA statistics. EWCJ175S_11ax_ATBS_12 Modify spatial To modify spatial Passed streamconfig to 2 streamconfig to 2 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 19

New Features 11ax Advance d traffic based scheduler forscheduling (9105/9115/9120)

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_11ax_ATBS_13 Modify spatial To modify spatial Passed streamconfig to 3 streamconfig to 3 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWCJ175S_11ax_ATBS_14 Modify spatial To modify spatial Passed streamconfig to 4 streamconfig to 4 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWCJ175S_11ax_ATBS_15 Enable To enable Passed videostreamand videostreamand monitor DL/UL monitor DL/UL OFDMA statistics OFDMA statistics EWCJ175S_11ax_ATBS_16 Modify MCS data To modify MCS Passed rates & monitor data rates & OFDMA stats with monitor OFDMA 11ax Android stats with 11ax client connected. Android client connected. EWCJ175S_11ax_ATBS_17 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, 11ax MU & radio 11ax MU & radio parameters for parameters for 5Ghz band. 5Ghz band. EWCJ175S_11ax_ATBS_18 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, 11ax MU & radio 11ax MU & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band. EWCJ175S_11ax_ATBS_19 Monitor traffic To verify 11ax Passed with 11ax Android MU details with client connected. 11ax Android client connected. EWCJ175S_11ax_ATBS_20 Monitor traffic To verify 11ax Passed with 11ax iPhone MU details with client connected. 11ax iPhone client connected. EWCJ175S_11ax_ATBS_21 Monitor traffic To verify 11ax Passed with non 11ax MU details with Windows client non 11axWindows connected. client connected.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 20

New Features 11ax Advance d traffic based scheduler forscheduling (9105/9115/ 9120)

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_11ax_ATBS_22 Monitor traffic To verify 11ax Passed with non 11axMac MU details with client connected. non 11ax Mac client connected. EWCJ175S_11ax_ATBS_23 Monitor traffic by To verify 11ax Passed connecting client MU details by to 2.4Ghz radio. connecting client to 2.4Ghz radio. EWCJ175S_11ax_ATBS_24 Verify 11ax MU To verify 11ax Passed details with client MU details with connecting to client connecting WPA2 - PSK to WPA2 - PSK configured WLAN configured WLAN EWCJ175S_11ax_ATBS_25 Verify 11ax MU To verify 11ax Passed details with client MU details with connecting to client connecting WPA3 - Dot1x to WPA3 - Dot1x configured WLAN configured WLAN EWCJ175S_11ax_ATBS_26 Connect upto 8 To connect upto 8 Passed clients and monitor clients and monitor DL/UL 11ax MU DL/UL 11ax MU statistics statistics EWCJ175S_11ax_ATBS_27 Check 11ax MU Check 11ax MU Passed stats with roaming stats with roaming client scenario client scenario EWCJ175S_11ax_ATBS_28 Monitor 11ax To monitor 11ax Passed traffic over mixed traffic over mixed mode with both mode with both OFDMA and SU, OFDMA and SU, MU traffic MU traffic EWCJ175S_11ax_ATBS_29 Monitor 11ax To monitor 11ax Passed traffic over mixed traffic over mixed mode with both mode with both OFDMA and SU, OFDMA and SU, MU traffic for AP MU traffic - 9105, models - 9105, 9115, 9120 9115, 9120 EWLCJ175S_11ax_ATBS_01 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 5Ghz band. 5Ghz band.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 21

New Features 11ax Advance d traffic based scheduler forscheduling (9105/9115/9120)

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_11ax_ATBS_02 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band. EWLCJ175S_11ax_ATBS_03 Monitor traffic To verify OFDMA Passed with 11ax Android details with 11ax client connected. Android client connected. EWLCJ175S_11ax_ATBS_04 Monitor traffic To verify OFDMA Passed with 11ax iPhone details with 11ax client connected. iPhone client connected. EWLCJ175S_11ax_ATBS_05 Monitor traffic To verify OFDMA Passed with non 11ax details with non Windows client 11ax Windows connected. client connected. EWLCJ175S_11ax_ATBS_06 Monitor traffic To verify OFDMA Passed with non 11axMac details with non client connected. 11ax Mac client connected. EWLCJ175S_11ax_ATBS_07 Monitor traffic by To verify OFDMA Passed connecting client details by to 2.4Ghz radio. connecting client to 2.4Ghz radio. EWLCJ175S_11ax_ATBS_08 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA2 - PSK WPA2 - PSK configured WLAN configured WLAN EWLCJ175S_11ax_ATBS_09 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA3 - Dot1x WPA3 - Dot1x configured WLAN configured WLAN EWLCJ175S_11ax_ATBS_10 Connect upto 8 To connect upto 8 Passed clients and monitor clients andmonitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWLCJ175S_11ax_ATBS_11 Modify spatial To modify spatial Passed streamconfig to 1 streamconfig to 1 streamand monitor streamand monitor OFDMA statistics. OFDMA statistics.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 22

New Features 11ax Advance d traffic based scheduler forscheduling (9105/9115/ 9120)

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_11ax_ATBS_12 Modify spatial To modify spatial Passed streamconfig to 2 streamconfig to 2 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_11ax_ATBS_13 Modify spatial To modify spatial Passed streamconfig to 3 streamconfig to 3 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_11ax_ATBS_14 Modify spatial To modify spatial Passed streamconfig to 4 streamconfig to 4 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_11ax_ATBS_15 Enable To enable Passed videostreamand videostreamand monitor DL/UL monitor DL/UL OFDMA statistics OFDMA statistics EWLCJ175S_11ax_ATBS_16 Modify MCS data To modify MCS Passed rates & monitor data rates & OFDMA stats with monitor OFDMA 11ax Android stats with 11ax client connected. Android client connected. EWLCJ175S_11ax_ATBS_17 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, 11ax MU & radio 11ax MU & radio parameters for parameters for 5Ghz band. 5Ghz band. EWLCJ175S_11ax_ATBS_18 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, 11ax MU & radio 11ax MU & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band. EWLCJ175S_11ax_ATBS_19 Monitor traffic To verify 11ax Passed with 11ax Android MU details with client connected. 11ax Android client connected. EWLCJ175S_11ax_ATBS_20 Monitor traffic To verify 11ax Passed with 11ax iPhone MU details with client connected. 11ax iPhone client connected.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 23

New Features 11ax OFDMA Support for EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_11ax_ATBS_21 Monitor traffic To verify 11ax Passed with non 11ax MU details with Windows client non 11axWindows connected. client connected. EWLCJ175S_11ax_ATBS_22 Monitor traffic To verify 11ax Passed with non 11axMac MU details with client connected. non 11ax Mac client connected. EWLCJ175S_11ax_ATBS_23 Monitor traffic by To verify 11ax Passed connecting client MU details by to 2.4Ghz radio. connecting client to 2.4Ghz radio. EWLCJ175S_11ax_ATBS_24 Verify 11ax MU To verify 11ax Passed details with client MU details with connecting to client connecting WPA2 - PSK to WPA2 - PSK configured WLAN configured WLAN EWLCJ175S_11ax_ATBS_25 Verify 11ax MU To verify 11ax Passed details with client MU details with connecting to client connecting WPA3 - Dot1x to WPA3 - Dot1x configured WLAN configured WLAN EWLCJ175S_11ax_ATBS_26 Connect upto 8 To connect upto 8 Passed clients and monitor clients andmonitor DL/UL 11ax MU DL/UL 11ax MU statistics statistics EWLCJ175S_11ax_ATBS_27 Check 11ax MU Check 11ax MU Passed stats with roaming stats with roaming client scenario client scenario EWLCJ175S_11ax_ATBS_28 Monitor 11ax To monitor 11ax Passed traffic over mixed traffic over mixed mode with both mode with both OFDMA and SU, OFDMA and SU, MU traffic MU traffic EWLCJ175S_11ax_ATBS_29 Monitor 11ax To monitor 11ax Passed traffic over mixed traffic over mixed mode with both mode with both OFDMA and SU, OFDMA and SU, MU traffic for AP MU traffic - 9105, models - 9105, 9115, 9120 9115, 9120

11ax OFDMA Support for EWC

Logical ID Title Description Status Defect ID

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 24

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_OFDMA_01 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 5Ghz band. 5Ghz band. EWCJ175S_OFDMA_02 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band.

EWCJ175S_OFDMA_03 Verifying details To verify OFDMA Passed with 11ax Android details with 11ax client connected. Android client connected. EWCJ175S_OFDMA_04 Verifying details To verify OFDMA Passed with 11ax iPhone details with 11ax client connected. iPhone client connected.

EWCJ175S_OFDMA_05 Verifying the To verify OFDMA Passed details with non details with non 11ax Windows 11ax Windows client connected. client connected. EWCJ175S_OFDMA_06 Verifying the To verify OFDMA Passed details with non details with non 11ax Mac client 11ax Mac client connected. connected.

EWCJ175S_OFDMA_07 Verify details by To verify OFDMA Passed connecting client to details by 2.4Ghz radio. connecting client to

2.4Ghz radio.

EWCJ175S_OFDMA_08 Check OFDMA To check OFDMA Passed support for AP support for AP configured in Local configured in Local mode. mode.

EWCJ175S_OFDMA_09 Check OFDMA To check OFDMA Passed support for AP support for AP configured in configured in Flex-connect mode. Flex-connect mode. EWCJ175S_OFDMA_10 Check OFDMA To check OFDMA Passed support for AP support for AP configured in configured in Bridge mode. Bridge mode.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 25

New Features 11ax OFDMA Support for EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_OFDMA_11 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA2 - PSK WPA2 - PSK configured WLAN configured WLAN EWCJ175S_OFDMA_12 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA3 - Dot1x WPA3 - Dot1x configured WLAN configured WLAN EWCJ175S_OFDMA_13 Connect upto 8 To connect upto 8 Passed clients and monitor clients and monitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWCJ175S_OFDMA_14 Connect upto 16 To connect upto 16 Passed clients and monitor clients and monitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWCJ175S_OFDMA_15 Modify spatial To modify spatial Passed streamconfig to 1 streamconfig to 1 streamand monitor streamand monitor OFDMA statistics. OFDMA statistics. EWCJ175S_OFDMA_16 Modify spatial To modify spatial Passed streamconfig to 2 streamconfig to 2 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWCJ175S_OFDMA_17 Modify spatial To modify spatial Passed streamconfig to 3 streamconfig to 3 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWCJ175S_OFDMA_18 Modify spatial To modify spatial Passed streamconfig to 4 streamconfig to 4 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWCJ175S_OFDMA_19 Modify MCS data To modify MCS Passed rates & monitor data rates & OFDMA stats with monitor OFDMA 11ax Android client stats with 11ax connected. Android client connected.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 26

New Features Called Station ID with AP Ethernet MAC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_OFDMA_20 Check OFDMA To check OFDMA Passed stats with roaming stats with roaming client scenario in client scenario different eWC with different 11 ax Aps

Called Station ID with AP Ethernet MAC

Logical ID Title Description Status Defect ID EWCJ175S_CSIAEM_01 Configure To Configure Failed CSCvw55858 radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting with accounting with “policy-tag-n am e” “policy-tag-n am e” EWCJ175S_CSIAEM_02 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting with accounting with “flex-profile-name “flex-profile-name EWCJ175S_CSIAEM_03 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWCJ175S_CSIAEM_04 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWCJ175S_CSIAEM_05 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 27

New Features Called Station ID with AP Ethernet MAC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_CSIAEM_06 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWCJ175S_CSIAEM_07 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWCJ175S_CSIAEM_08 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWCJ175S_CSIAEM_09 configuredifferent To configure Passed servers for different servers authentication and for authentication accounting and accounting EWCJ175S_CSIAEM_10 configuring both To configuring Passed AAA and local both AAA and authentication local authentication EWCJ175S_CSIAEM_11 downgrade and To verify config Passed upgrade impact impact after downgrade and upgrade EWCJ175S_CSIAEM_12 HA active to To verify config Passed stanby config impact HA active impact to stanby EWCJ175S_CSIAEM_13 active to stanby to To verify config Passed active config impact when impact active to stanby to active EWCJ175S_CSIAEM_14 Change mac To Change mac Passed address format in address format in atrribute and check atrribute and check config impact config "radius-server attribute 31 mac format ? "

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 28

New Features Called Station ID with AP Ethernet MAC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_CSIAEM_15 with mac filtering To Configure mac Passed configured in filtering and verify AAA client connectivity EWCJ175S_CSIAEM_16 Change station id To Change station Passed case and verify id case and verify config config impact impact"radius-server attribute wireless authentication callstationIdCase upper/lower" EWLCJ175S_CS_01 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting with accounting with “policy-tag-n am e” “policy-tag-n am e” EWLCJ175S_CS_02 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting with accounting with “flex-profile-nam e “flex-profile-nam e EWLCJ175S_CS_03 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWLCJ175S_CS_04 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWLCJ175S_CS_05 Configure To Configure Passed radius-server radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 29

New Features Called Station ID with AP Ethernet MAC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_CS_06 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWLCJ175S_CS_07 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting EWLCJ175S_CS_08 Configure To Configure Passed radius-se rve r radius-server wireless attribute wireless attribute call station id for call station id for authentication and authentication and accounting accounting EWLCJ175S_CS_09 configuredifferent To configure Passed servers for different servers authentication and for authentication accounting and accounting EWLCJ175S_CS_10 configuring both To configuring Passed AAA and local both AAA and authentication local authentication EWLCJ175S_CS_11 downgrade and To verify config Passed upgrade impact impact after downgrade and upgrade EWLCJ175S_CS_12 HA active to To verify config Passed stanby config impact HA active impact to stanby EWLCJ175S_CS_13 active to stanby to To verify config Passed active config impact when impact active to stanby to active EWLCJ175S_CS_14 Change mac To Change mac Passed address format in address format in atrribute and check atrribute and check config impact config "radius-server attribute 31 mac format ? "

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 30

New Features RRM assurance for granular reasons for power and channel change

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_CS_15 with mac filtering To Configure mac Passed configured in filtering and verify AAA client connectivity EWLCJ175S_CS_16 Change station id To Change station Passed case and verify id case and verify config config impact impact"radius-server attribute wireless authentication callstationIdCase upper/lower"

RRM assurance for granular reasons for power and channel change

Logical ID Title Description Status Defect ID EWCJ175S_RRM_Assurance_01 Configuring To configure Passed Access Points, Access Points, Channel width Channel width radio parameters radio parameters for 5Ghz band. for 5Ghz band. EWCJ175S_RRM_Assurance_02 Configuring To configure Passed Access Points, Access Points, Channel width Channel width radio parameters radio parameters for 2.4Ghz band. for 2.4Ghz band. EWCJ175S_RRM_Assurance_03 Configure To configure Passed channel channel parameters for parameters for 5ghz band and 5ghz band and monitor in monitor in DNAC DNAC EWCJ175S_RRM_Assurance_04 Configure To configure Passed channel channel parameters for parameters for 5ghz band slot 2 5ghz band slot 2 and monitor in and monitor in DNAC DNAC EWCJ175S_RRM_Assurance_05 Configure To configure Passed channel channel parameters for parameters for 24ghz band and 24ghz band and monitor in monitor in DNAC DNAC

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 31

New Features RRM assurance for granular reasons for power and channel change

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _RRM _Assuranc e_06 Configure To configure Passed channel channel parameters for parameters for dual band and dual band and monitor in monitor in DNAC DNAC EWCJ175S _RRM _Assuranc e_07 Channel updation To perform Passed and monitor channel updation assurance in and monitor DNAC assurance in DNAC EWCJ175S _RRM _Assuranc e_08 Configure tx To configure tx Passed power for 5ghz power for 5ghz band and monitor band and monitor in DNAC in DNAC EWCJ175S _RRM _Assuranc e_09 Configure tx To configure tx Passed power for 24ghz power for 24ghz band and monitor band and monitor in DNAC in DNAC EWCJ175S _RRM _Assuranc e_10 Configure tx To configure tx Passed power for dual power for dual band and monitor band and monitor in DNAC in DNAC EWCJ175S _RRM _Assuranc e_11 Configure tx To configure tx Passed power for 5ghz power for 5ghz rrm band and rrm band and monitor in monitor in DNAC DNAC EWCJ175S _RRM _Assuranc e_12 Configure tx To configure tx Passed power for 24ghz power for 24ghz rrm band and rrm band and monitor in monitor in DNAC DNAC EWCJ175S _RRM _Assuranc e_13 Validate To validate Passed assurance via assurance via RRM using RRM using Android client Android client EWCJ175S _RRM _Assuranc e_14 Validate To validate Passed assurance via assurance via RRM using RRM using Surface client Surface client EWCJ175S _RRM _Assuranc e_15 Validate To validate Passed assurance via assurance via RRM using mac RRM using mac client client

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 32

New Features RRM assurance for granular reasons for power and channel change

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_RRM_Assurance_16 Validate To validate Passed assurance via assurance via RRM using RRM using different models different models of AP of AP EWCJ175S_RRM_Assurance_17 Validate To validate Passed assurance via assurance via RRM using RRM using EWC-AP EWC-AP EWCJ175S_RRM_Assurance_18 Validate To validate Passed assurance via assurance via RRM using HA RRM using HA pair pair EWLCJ175S_RRM_ASSURANCE_01 Configuring To configure Passed Access Points, Access Points, Channel width Channel width radio parameters radio parameters for 5Ghz band. for 5Ghz band. EWLCJ175S_RRM_ASSURANCE_02 Configuring To configure Passed Access Points, Access Points, Channel width Channel width radio parameters radio parameters for 2.4Ghz band. for 2.4Ghz band. EWLCJ175S_RRM_ASSURANCE_03 Configure To configure Passed channel channel parameters for parameters for 5ghz band and 5ghz band and monitor in monitor in DNAC DNAC EWLCJ175S_RRM_ASSURANCE_04 Configure To configure Passed channel channel parameters for parameters for 5ghz band slot 2 5ghz band slot 2 and monitor in and monitor in DNAC DNAC EWLCJ175S_RRM_ASSURANCE_05 Configure To configure Passed channel channel parameters for parameters for 24ghz band and 24ghz band and monitor in monitor in DNAC DNAC EWLCJ175S_RRM_ASSURANCE_06 Configure To configure Passed channel channel parameters for parameters for dual band and dual band and monitor in monitor in DNAC DNAC

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 33

New Features RRM assurance for granular reasons for power and channel change

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_RRM_ASSURANCE_07 Channel updation To perform Passed and monitor channel updation assurance in and monitor DNAC assurance in DNAC EWLCJ175S_RRM_ASSURANCE_08 Configure tx To configure tx Passed power for 5ghz power for 5ghz band and monitor band and monitor in DNAC in DNAC EWLCJ175S_RRM_ASSURANCE_09 Configure tx To configure tx Passed power for 24ghz power for 24ghz band and monitor band and monitor in DNAC in DNAC EWLCJ175S_RRM_ASSURANCE_10 Configure tx To configure tx Passed power for dual power for dual band and monitor band and monitor in DNAC in DNAC EWLCJ175S_RRM_ASSURANCE_11 Configure tx To configure tx Passed power for 5ghz power for 5ghz rrm band and rrm band and monitor in monitor in DNAC DNAC EWLCJ175S_RRM_ASSURANCE_12 Configure tx To configure tx Passed power for 24ghz power for 24ghz rrm band and rrm band and monitor in monitor in DNAC DNAC EWLCJ175S_RRM_ASSURANCE_13 Validate To validate Passed assurance via assurance via RRM using RRM using Android client Android client EWLCJ175S_RRM_ASSURANCE_14 Validate To validate Passed assurance via assurance via RRM using RRM using Surface client Surface client EWLCJ175S_RRM_ASSURANCE_15 Validate To validate Passed assurance via assurance via RRM using mac RRM using mac client client EWLCJ175S_RRM_ASSURANCE_16 Validate To validate Passed assurance via assurance via RRM using RRM using different models different models of AP of AP

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 34

New Features

RE V IEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_RRM_ASSURANCE_17 Validate To validate Passed assurance via assurance via RRM using RRM using EWC-AP EWC-AP EWLCJ175S_RRM_ASSURANCE_18 Validate To validate Passed assurance via assurance via RRM using HA RRM using HA pair pair

Adaptive Load Based EDCA Parame

Logical ID Title Description Status Defect ID EWLCJ174S_AdaptiveLoad_01 Validate the To associate the Passed EDCA parameter client and with wmm-default verifying EDCA profile parameter in wmm-default profile EWLCJ174S_AdaptiveLoad_02 Validate the To associate the Passed EDCA parameter client and with custom-voice verifying EDCA profile parameter in custom-voice profile EWLCJ174S_AdaptiveLoad_03 Validate the To associate the Passed EDCA parameter client and with verifying EDCA optimized-video-voice parameter in profile optimized-video-voice profile EWLCJ174S_AdaptiveLoad_04 Validate the To associate the Passed EDCA parameter client and with verifying EDCA optimized-voice parameter in profile optimized-voice profile EWLCJ174S_AdaptiveLoad_05 Validate the To associate the Passed EDCA parameter client and with svp-voice verifying EDCA profile parameter in svp-voice profile

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 35

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ174S_AdaptiveLoad_06 Validate the To associate the Passed EDCA parameter client and with fastlane verifying EDCA profile parameter in fastlane profile EWLCJ174S_AdaptiveLoad_07 Associate the To associate the Passed windows client client and and verify the verifying EDCA EDCA parameter parameter in 9120 AP EWLCJ174S_AdaptiveLoad_08 Associate the To associate the Passed Android client and client and verify the EDCA verifying EDCA parameter in 9130 parameter AP EWLCJ174S_AdaptiveLoad_09 Associate the To associate the Passed MAC client and client and verify the EDCA verifying EDCA parameter in 9120 parameter AP EWLCJ174S_AdaptiveLoad_10 Validate the To associate the Passed EDCA parameter client and with different verifying EDCA profile in 2.4GHz parameter for frequency 2.4GHZ frequency EWLCJ174S_AdaptiveLoad_11 Validate the To associate the Passed EDCA parameter client and with different verifying EDCA profile in 5GHz parameter for frequency 5GHZ frequency EWLCJ174S_AdaptiveLoad_12 Validate the To associate the Passed EDCA parameter client and with single client verifying EDCA parameter. EWLCJ174S_AdaptiveLoad_13 Perform Inter To associate the Passed roaming and client and validate the load verifying EDCA balancing parameter for 5GHZ frequency EWLCJ174S_AdaptiveLoad_14 Perform Intra To associate the Passed roaming and client and validate the load verifying EDCA balancing parameter for 5GHZ frequency

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 36

New Features Umbrella Enhanceme nts

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ174S_AdaptiveLoad_15 Perform controller To associate the Passed reload and validate client and the load balancing verifying EDCA parameter for 5GHZ frequency

Umbrella Enhancements

Logical ID Title Description Status Defect ID EWLCJ175S_Umbrela_01 Verifying ewlc To verify ewlc Passed registered with registered with Umbrella Umbrella Dashboard Dashboard EWLCJ175S_Umbrela_02 Verifying To verify Passed syslogs/error syslogs/error messages related to messages related to splitdns after splitdns when AP is changing AP from in Flex mode Local mode to Flex mode EWLCJ175S_Umbrela_03 Configure To configure Passed Umbrella Umbrella Parameter Map Parameter Map through CLI and through CLI and verify details in verifing the same in GUI GUI EWLCJ175S_Umbrela_04 Enabling or To veify DNScrypt Passed disabling DNScrypt enabling or in GUI and CLI disabling through and verify the GUI and CLI details EWLCJ175S_Umbrela_05 Configure whitelist To configure Passed wth patterns, set up whitelist with AP in flex and patterns, set up AP connect end in flex and to devices (like connect any client Windows, Android to Umbrella etc) to Umbrella enabled WLAN enabled WLAN profile profile

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 37

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Umbrela_06 Configure whitelist To configure Passed wth patterns, set up whitelist with AP in flex and patterns, set up AP connect end in flex and to devices to connect any client Umbrella enabled to Umbrella WLAN profile and enabled WLAN verify packets sent profile and verify

to clients and verify packets sent to

there are no clients and verify

errors/syslogs there are no errors/syslogs EWLCJ175S_Umbrela_07 Configure custom To configure Passed parameter maps, set customparameter up ap in flex, maps, set up ap in configure whitelist flex, configure with patterns, check whitelist with multi-profile patterns, check splitdns works or multi-profile not and check no splitdns works or error/syslog not and verify no messages syslogs/no error messages

EWLCJ175S_Umbrela_08 Verify show To verify show Passed

commands on commands on

controller: controller:

Configure Configure controller in flex controller in flex mode, multiple mode, multiple pmaps, multiple pmaps, multiple whitelists, IPv4 whitelists, IPv4 server list, IPv6 server list, IPv6 server list, join server list, join clients. Check clients. Check output is correct. output is correct. Same check on AP Same check on AP. EWLCJ175S_Umbrela_09 Verify client To verify whether Passed connected or not client connected or when global not when global parameter enabled parameter enabled in Local Mode in Local Mode

EWLCJ175S_Umbrela_10 Verify multiple To verify whether Passed clients connected or multiple clients not when global connected or not

parameter and when global

multiple whitelists parameter and configured in Loca multiple whitelists mode configured in Loca l mode

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 38

New Features Umbrella Enhanceme nts

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Umbrela_11 Verify multiple To verify whether Passed clients connected or multiple clients not when custom connected or not global parameter when custom and multiple global parameter whitelists and multiple configured in Local whitelists mode configured in Local mode

EWLCJ175S_Umbrela_12 Verify show To verify show Passed commands on commands on controller: controller: Configure Configure controller in local controller in local mode, multiple mode, multiple pmaps, multiple pmaps, multiple whitelists, IPv4 whitelists, IPv4 server list, IPv6 server list, IPv6 server list, join server list, join

clients. Check clients. Check

output is correct. output is correct. Same check on AP. Same check on AP . EWLCJ175S_Umbrela_13 Configure regex To configure regex Passed param-map with param-map with various patterns. various patterns. Check that the Check that the whitelist cannot be whitelist cannot be associated to an associated to an Umbrella profile if Umbrella profile if it contains it contains unsupported unsupported patterns for patterns for wireless (config wireless (config validation) validation) EWLCJ175S_Umbrela_14 Reload: Configure Reload: To Passed multiple pmps and configure multiple multiple local pmps and multiple domains, reload the local domains, controller and reload the verify configured controller and to data exists or not verify configured data exists or not

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 39

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Umbrela_15 Reload: Configure Reload: To Passed multiple pmps and configure multiple multiple local pmps and multiple domains, reload the local domains, controller with 17.5 reload the build and verify controllerwith 17.5 configured data build and to verify exists or not in 17.4 configured data build exists or not in 17.4 build EWLCJ175S_Umbrela_16 Reload: configure Reload: To Passed resolver ipv4 configure resolver address, reload the ipv4 address, reload controller, verify the controller, to there are no erros verify there are no erros

11ax BSS Coloring(OBSS PD) on 9105/9115/9120 APs

Logical ID Title Description Status Defect ID EWLCJ175S _OBSS Enable Global To verify wheather Passed PD_01 OBSS PD for 5ghz the OBBSS PD band enable or not for 5 GHz band EWLCJ175S _OBSS Disable Global To Check wheather Passed PD_02 OBSS PD for 5ghz the OBBSS PD band disable or not for 5 GHz EWLCJ175S _OBSS Enable Global To verify wheather Passed PD_03 OBSS PD for 2.4 the OBBSS PD ghz band enable or not for 2.4 Ghz GHz band EWLCJ175S _OBSS Disable Global To Check wheather Passed PD_04 OBSS PD for 2.4 the OBBSS PD ghz band disable or not for 2.4 GHz EWLCJ175S _OBSS Set OBSS PD value To verify wheather Passed PD_05 for 5 GHZ band the values set for 5 Ghz band or not EWLCJ175S _OBSS Set OBSS PD value To verify wheather Passed PD_06 for 2.4 GHZ band the values set for 2.4 ghz band or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 40

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _OBSS Creating RF Profile To Validate Passed PD_07 with OBSS PD wheather RF Profile enabled for 5/2.4 cretaed with OBSS GHz band PD enable for 5/2.4 GHz band EWLCJ175S _OBSS Disabling OBSS PD To Validate Passed PD_08 in RF Profile wheather RF Profile is created with OBSS PD enable for 5/2.4 GHz band EWLCJ175S _OBSS Viewing OBSS PD To checking the Passed PD_09 supports in different OBSS PD supports AP models in different AP models EWLCJ175S _OBSS Configuring BSS To Verify Passed PD_10 color details in AP Configured color & controller CLIs details is reflected in AP and Controller CLIs EWLCJ175S _OBSS Checking the BSS To Check whether Passed PD_11 color details are the BSS color retained after AP retained after AP & and Controller Controller reload reload EWLCJ175S _OBSS Verify To verify wheather Passed PD_12 enable/disable of the BSS color is BSS coloring on reflected in radio is reflected in Management management packets packets or not EWLCJ175S _OBSS Verifying OBSS PD To check whether Passed PD_13 with inter roming OBSS PD is enable client using different or not , when radio different radio clients are roaming between controllers EWLCJ175S _OBSS Verifying OBSS PD To check whether Passed PD_14 enabled with inter OBSS PD enable or roming client using not , when same same radio radio clients are roaming between controllers EWLCJ175S _OBSS Verifying OBSS PD To verify whether Passed PD_15 enabled with Intra OBSS PD enabled client roaming by with client roaming using 9115AP between AP's or not

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 41

New Features Easy PSK:WLAN Client Onboarding w/o registration

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _OBSS Changing 9115 AP To change the mode Passed PD_16 mode from local to of AP from local Flex connect & mode to Flexconnect check the BSS mode and check the coloring BSS coloring Configuration configuration in 9115 Ap EWLCJ175S _OBSS Changing 9115 AP To change the mode Passed PD_17 mode from flex to of AP from flex local & check the mode to local mode BSS coloring and check the BSS Configuration coloring configuration in 9115 Ap

Easy PSK:WLAN Client Onboarding w/o registration

Logical ID Title Description Status Defect ID EWLCJ175S_EPSK_01 Verify you can To Verify whether Passed configure a wlan you can configure a with easy psk wlan with easy psk feature on it when feature on it when aaa override is set aaa override is set on the associated on the associated policy profile. policy profile. Verify no syslog is Verify no syslog is thrown. thrown. EWLCJ175S_EPSK_02 Verify that if you To Verify that Passed configure a wlan whether you with easy psk configure a wlan feature and its with easy psk associated policy feature and its profile does not associated policy have the aaa profile does not override set, a have the aaa syslog is thrown. override set, a syslog is thrown. EWLCJ175S_EPSK_03 Verify that it is not To Verify that it is Passed possible to not possible to configure Easy PSK configure Easy PSK if one of the if one of the following option is following option is set on the same set on the same wlan: mPSK PSK wlan: mPSK PSK key WPA3 CCKM key WPA3 CCKM dot1x dot1x

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 42

New Features Easy PSK:WLAN Client Onboarding w/o registration

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_EPSK_04 Verify that it is not To Verify that it is Passed possible to not possible to configure any of the configure any of the following option on following option on a wlan where Easy a wlan where Easy PSK is enabled PSK is enabled mPSK PSK key mPSK PSK key WPA3 CCKM WPA3 CCKM dot1x dot1x EWLCJ175S_EPSK_05 Verify that when To Verify that when Passed configuring the configuring the feature on a wlan feature on a wlan that is pushed on an that is pushed on an AP configured in AP configured in flex mode, a syslog flex mode, a syslog is thrown. is thrown. EWLCJ175S_EPSK_06 Verify that the To Verify that the Passed feature can't be feature can't be configured on a configured on a EWC device EWC device EWLCJ175S_EPSK_07 Verify that if the To Verify that if the Passed feature is feature is configured together configured together with local with local authentication, a authentication, a syslog is thrown. syslog is thrown. EWLCJ175S_EPSK_08 Verify that if the To Verify that if the Passed feature is feature is configured together configured together with local with local switching, a syslog switching, a syslog is thrown. is thrown. EWLCJ175S_EPSK_09 With a valid To veify with a Passed configuration, save valid configuration, the configuration save the and performa configuration and reboot. Verify that performa reboot. the configuration is Verify that the kept and valid, and configuration is no syslog is thrown kept and valid, and no syslog is thrown.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 43

New Features Easy PSK:WLAN Client Onboarding w/o registration

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_EPSK_10 Remove the Easy To Remove the Passed PSK feature from Easy PSK feature the configured wlan from thecon figu red in the previous test wlan in theprevious through yang. test throug yang. Verify that the same Verify that the same

config can be config can be observed in the CLI . observed in the CLI. EWLCJ175S_EPSK_11 Configure a new To Configure a new Passed wlan with easy PSK wlan with easy PSK through SNMP. through SNMP. Verify that the Verify that the configuration is configuration is effective through effective through CLI. Remove the CLI. Remove the easy PSK from the easy PSK from the wlan and verify in wlan and verify in the CLI that the the CLI that the same config is no same config is no longer applied. longer applied. EWLCJ175S_EPSK_12 Configure a wlan To Configure a Passed with easy PSK wlan with easy PSK through CLI. Verify through CLI. Verify that the that the configuration is configuration is effective through effective through SNMP. SNMP. EWLCJ175S_EPSK_13 Configure a wlan To Configure a Passed with Easy PSK wlan with Easy feature through the PSK feature through CLI. Verify that you the CLI. Verify that can get the same you can get the configuration same configuration through yang. through yang.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 44

New Features Easy PSK:WLAN Client Onboarding w/o registration

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_EPSK_14 Configure a WLAN To Configure a Passed with easy PSK, the WLAN with easy Radius with two PSK, the Radius valid PSKs. with two valid Connect one client PSKs. Connect one with the first PSK. client with the first Verify theexchange PSK. Verify the between the exchange between controller and the the controller and Radius with a the Radius with a capture (verify new capture (verify new AAA attributes are AAA attributes are filled correctly). filled correctly). Verify that the Verify that the client can ping the client can ping the gateway gateway EWLCJ175S_EPSK_15 Following the Following the Passed previous test, previous test, disconnect the client disconnect the client and connect it again and connect it again using the second using the second PSK. Verify again PSK. Verify again the Radius the Radius exchange and the exchange and the client can reach Run client can reach Run state and can ping state and can ping the gateway. the gateway. EWLCJ175S_EPSK_16 Configure 16 wlans To Configure 16 Passed with easy PSK wlans with easy enabled. Connect PSK enabled. one client to each Connect one client WLAN. Verify each to each WLAN. client reaches Run Verify each client state and can ping reaches Run state the gateway. and can ping the gateway. EWLCJ175S_EPSK_17 Configure an easy To Configure an Passed psk wlan using a easy psk wlan using aaa server that is not a aaa server that is reacheable. Verify not reacheable. that the client can't Verify that the reach Run state and client can't reach is deleted. Run state and is deleted.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 45

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_EPSK_18 Configure a wlan To Configure a Passed with easy psk and wlan with easy psk webauth on mab and webauth on failure. Make sure mab failure. Make that the webauth on sure that the mab failure is not webauth on mab applied in case the failure is not client is connecting applied in case the with a non client is connecting supported with a non passphrase. supported passphrase.

ApplicationExperienceSupportonIOS-XEWirelessPlatforms

Logical ID Title Description Status Defect ID EWLCJ174S_AES_01 Creating a policy To create a policy Passed profile in eWLC profile in 9800-40 9800-40 and check eWLC and check if if the profile is the policy profile is shown in shown in the Application application viibility visibility page page or not EWLCJ174S_AES_02 Creating a policy To create a policy Passed profile in eWLC profile in 9800-80 9800-80 and check eWLC and check if if the profile is the policy profile is shown in shown in the Application application viibility visibility page page or not EWLCJ174S_AES_03 Creating a policy To create a policy Passed profile in eWLC profile in 9800-CL 9800-CL and check eWLC and check if if the profile is the policy profile is shown in shown in the Application application viibility visibility page page or not EWLCJ174S_AES_04 Mapping the created To map the created Passed policy profile under policy profile under Application Application visibility in eWLC visibilityin eWLC 9800-40 and check 9800-40 and check the behaviour the behaviour .

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 46

New Features Enabling Packet traceand conditionaldebug in eWLC9800-CL

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ174S_AES_05 Mapping the created To map the created Passed policy profile under policy profile under Application Application visibility in eWLC visibilityin eWLC 9800-80 and check 9800-80 and check the behaviour the behaviour . EWLCJ174S_AES_06 Mapping the created To map the created Passed policy profile under policy profile under Application Application visibility in eWLC visibilityin eWLC 9800-CL and check 9800-CL and check the behaviour the behaviour . EWLCJ174S_AES_07 Enabling External To enabling Passed Collector address External Collector for the policy profile address for the mapped in policy profile Application mapped in visibility and Application checking the visibility and behaviour checking the behaviour

EWLCJ174S_AES_08 Checking if the To check if the local Passed local Collector in collecctor for the the Application application visibility visbility works for works or not for the the eWLC which eWLC which works works in Standalone on standalone mode mode EWLCJ174S_AES_09 Checking if the To check if the local Passed local Collector in collecctor for the the Application application visibility visbility works for works or not for the the eWLC which eWLC which works works in Active on Active mode mode EWLCJ174S_AES_10 Checking if the To check if the local Passed local Collector in collecctor for the the Application application visibility visbility works for works or not for the the eWLC which is eWLC which is in in HA mode HA mode

Enabling Packet trace and conditionaldebug ineWLC9800-CL

Logical ID Title Description Status Defect ID

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 47

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_PacketTracer_01 Enabling Packet To check if the Passed trace and packet trace and conditional debug conditional debug in eWLC 9800-40 is enabled on 9800-40 or not EWLCJ175S_PacketTracer_02 Enabling Packet To check if the Passed trace and packet trace and conditional debug conditional debug in eWLC 9800-80 is enabled on 9800-80 or not EWLCJ175S_PacketTracer_03 Enabling Packet To check if the Passed trace and packet trace and conditional debug conditional debug in eWLC 9800-CL is enabled on 9800-CL or not EWLCJ175S_PacketTracer_04 Enabling Packet To check if the Passed trace and packet trace and conditional debug conditional debug in eWLC 9800 is enabled or not with HA setup EWLCJ175S_PacketTracer_05 Verifying if the To check if the Passed packet trace for packet trace is 9800-40 are enabled and the captured and the configured details shown command output correctly are shown for the eWLC 9800-40 or not EWLCJ175S_PacketTracer_06 Verifying if the To check if the Passed packet trace for packet trace is 9800-80 are enabled and the capturedand the configured details shown command output correctly are shown for the eWLC 9800-80 or not EWLCJ175S_PacketTracer_07 Verifying if the To check if the Passed packet trace for packet trace is 9800-CL are enabled and the captured and the configured details shown command output correctly are shown for the eWLC 9800-CL or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 48

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_PacketTracer_08 Verifying if the To check if the Passed packet trace for packet trace is 9800 HA are enabled and the captured and the configured details shown command output correctly are shown for the eWLC 9800 HA or not EWLCJ175S_PacketTracer_09 Upgrading the To check if the Passed eWLC after configured packet configuring the trace and Packet trace and conditional debug conditional debug are same even after command and the upgrade of the check eWLC EWLCJ175S_PacketTracer_10 Downgrading the To check if the Passed eWLC after configured packet configuring the trace and Packet trace and conditional debug conditional debug are same even after command and the downgrade of check the eWLC

Client Debug Bundle

Logical ID Title Description Status Defect ID EWCJ174S_CDB_01 Verify the tech To Verify the tech Passed wireless command wireless command EWCJ174S_CDB_02 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9115 details , keep alive in 9115 EWCJ174S_CDB_03 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9117 details , keep alive in 9117 EWCJ174S_CDB_04 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9120 details , keep alive in 9120

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 49

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ174S_CDB_05 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9130 details , keep alive in 9130 EWCJ174S_CDB_06 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different MAC with different MAC clients clients EWCJ174S_CDB_07 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different Android with different clients Android clients EWCJ174S_CDB_08 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different Windows with different clients Windows clients

ICAP Support for C9130 fo 8 users

Logical ID Title Description Status Defect ID EWLCJ175S_ICAPsupport_01 Packet capture of To capture the Passed client when the Packet of the client client is connected when the client is to 9130 AP with connected to AP 2.4 GHz with radio as 2.4 GHz in EWLC EWLCJ175S_ICAPsupport_02 Packet capture of To capture the Passed client when the Packet of the client client is connected when the client is to 9130 AP with 5 connected to AP GHz with radio as 5 GHz in EWLC EWLCJ175S_ICAPsupport_03 Packet capture for To verify the Passed Android client packet capture for using Intellingent Android client Capture option in using Intelligent Apgroup capture in APgroup

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 50

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_ICAPsupport_04 Packet capture for To verify the Passed Windows JOS packet capture for client using Windows client Intellingent using Intelligent Capture option in capture in APgroup APgroup EWLCJ175S_ICAPsupport_05 Packet capture for To verify the Passed IOS client using packet capture for Intellingent IOS client using Capture option in Intelligent capture APgroup in APgroup EWLCJ175S_ICAPsupport_06 Packet capture for To verify the Passed Mac OS client packet capture for using Intellingent MAC OS client Capture option in using Intelligent APgroup capture in APgroup EWLCJ175S_ICAPsupport_07 Capturing of To capture packet Passed Packet of the client when the client is when the client is connected to the connected with iOS AP with open security security as OPEN in EWLC EWLCJ175S_ICAPsupport_08 Capturing of To capture packet Passed Packet of the client when the client is when the client is connected to the connected with iOS AP with WPA 2 PSK security as WPA 2 security PSK in EWLC EWLCJ175S_ICAPsupport_09 Capturing of To capture packet Passed Packet of the client when the client is when the client is connected to the connected with iOS AP with WPA 2 Enterprise security as WPA 2 security Enterprise in EWLC EWLCJ175S_ICAPsupport_10 Capturing of To capture packet Passed Packet of the client when the client is when the client is connected to the connected with AP with security captive portal-web as Captive consent portal-webconsent

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 51

New Features 11ax OFDMA Support for EWLC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_ICAPsupport_11 Packet capture for To verify the Passed Anyconnect client packet capture for using Intellingent Anyconnect client Capture option in using Intelligent APgroup page capture in APgroup page EWLCJ175S_ICAPsupport_12 Packet capture for To verify the Passed Windows JOS packet capture for client using Windows JOS Intellingent client using Capture option in Intelligent capture AP page in AP page EWLCJ175S_ICAPsupport_13 Packet capture for To verify the Passed Android client packet capture for using Intellingent Android client Capture option in using Intelligent AP page capture in AP page EWLCJ175S_ICAPsupport_14 Packet capture for To verify the Passed iOS client using packet capture for Intellingent iOS client using Capture option in Intelligent capture AP page in AP page EWLCJ175S_ICAPsupport_15 Packet capture for To verify the Passed MacOS client packet capture for using Intellingent MacOS client Capture option in using Intelligent AP page capture in AP page EWLCJ175S_ICAPsupport_16 Packet capture for To verify the Passed Anyconnect client packet capture for using Intellingent Anyconnect client Capture option in using Intelligent AP page capture in AP page

11ax OFDMA Support for EWLC

Logical ID Title Description Status Defect ID EWLCJ175S_OFDMA_01 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 5Ghz band. 5Ghz band.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 52

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_OFDMA_02 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band. EWLCJ175S_OFDMA_03 Verifying details To verify OFDMA Passed with 11ax Android details with 11ax client connected. Android client connected. EWLCJ175S_OFDMA_04 Verifying details To verify OFDMA Passed with 11ax iPhone details with 11ax client connected. iPhone client connected. EWLCJ175S_OFDMA_05 Verifying the To verify OFDMA Passed details with non details with non 11ax Windows 11ax Windows client connected. client connected. EWLCJ175S_OFDMA_06 Verifying the To verify OFDMA Passed details with non details with non 11ax Mac client 11ax Mac client connected. connected. EWLCJ175S_OFDMA_07 Verify details by To verify OFDMA Passed connecting client to details by 2.4Ghz radio. connecting client to 2.4Ghz radio. EWLCJ175S_OFDMA_08 Check OFDMA To check OFDMA Passed support for AP support for AP configured in Local configured in Loca mode. mode. EWLCJ175S_OFDMA_09 Check OFDMA To check OFDMA Passed support for AP support for AP configured in configured in Flex-connect mode. Flex-connect mode. EWLCJ175S_OFDMA_10 Check OFDMA To check OFDMA Passed support for AP support for AP configured in configured in Bridge mode. Bridge mode. EWLCJ175S_OFDMA_11 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA2 - PSK WPA2 - PSK configured WLAN configured WLAN

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 53

New Features 11ax OFDMA Support for EWLC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_OFDMA_12 Verify OFDMA To verify OFDMA Passed details with client details with client connecting to connecting to WPA3 - Dot1x WPA3 - Dot1x configured WLAN configured WLAN EWLCJ175S_OFDMA_13 Connect upto 8 To connect upto 8 Passed clients and monitor clients and monitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWLCJ175S_OFDMA_14 Connect upto 16 To connect upto 16 Passed clients and monitor clients and monitor DL/UL OFDMA DL/UL OFDMA statistics statistics EWLCJ175S_OFDMA_15 Modify spatial To modify spatial Passed streamconfig to 1 streamconfig to 1 streamand monitor streamand monitor OFDMA statistics. OFDMA statistics. EWLCJ175S_OFDMA_16 Modify spatial To modify spatial Passed streamconfig to 2 streamconfig to 2 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_OFDMA_17 Modify spatial To modify spatial Passed streamconfig to 3 streamconfig to 3 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_OFDMA_18 Modify spatial To modify spatial Passed streamconfig to 4 streamconfig to 4 streams and streams and monitor OFDMA monitor OFDMA statistics. statistics. EWLCJ175S_OFDMA_19 Enable videostream To enable Passed and monitor videostreamand DL/UL OFDMA monitor DL/UL statistics OFDMA statistics EWLCJ175S_OFDMA_20 Modify MCS data To modify MCS Passed rates & monitor data rates & OFDMA stats with monitor OFDMA 11ax Android client stats with 11ax connected. Android client connected.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 54

New Features Capabilitytoenable/disable 11axfeaturesperSSI D

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_OFDMA_21 Check OFDMA To check OFDMA Passed stats with roaming stats with roaming client scenario in client scenario different eWLC with different 11 ax Aps

Capability to enable/disable 11ax features per SSID

Logical ID Title Description Status Defect ID EWLCJ175S_CED_01 Check the 11 ax To verify whether Passed enabling or not via the 11 ax parameters GUI enable or not via GUI EWLCJ175S_CED_02 Check the 11 ax To verify whether Passed disabling or not via the 11 ax parameters GUI disable or not via GUI EWLCJ175S_CED_03 Check the 11 ax To verify whether Passed enabling or not via the 11 ax parameters CLI enable or not via CLI EWLCJ175S_CED_04 Check the 11 ax To verify whether Passed disabling or not via the 11 ax parameters CLI disable or not via CLI EWLCJ175S_CED_05 Disabling 11 ax To check the client Passed radio and checking connectivity after the client disabling 11 ax connectivity EWLCJ175S_CED_06 Checking the 11 ax To verify the 11 ax Passed parameters after AP for after AP reboot reboot EWLCJ175S_CED_07 Checking the 11 ax To check whether Passed parameters after AP the 11 ax parameters radio change showing or not after changing the AP radio EWLCJ175S_CED_08 Verifying 11 ax To Verify the 11 ax Passed parameters for parameters for different AP models different AP models EWLCJ175S_CED_09 Validating the 11ax To validate the 11 Passed parameters after ax parameters for disjoin the AP after Ap disjoin

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 55

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_CED_10 Verifying the 11 ax To verify the 11 ax Passed parametrs after parameters for deleting the client deleted client EWLCJ175S_CED_11 monitoring the 11 To check the 11 ax Passed ax parameters after parameters after AP AP provisioning provisioning from from DNAC DNAC EWLCJ175S_CED_12 Verifying the 11 ax To Verify the 11 ax Passed parameters by parameters after deleting the SSID Deleting SSID EWLCJ175S_CED_13 Verifying the 11 ax To Verify the 11 ax Passed parameters for intra parameters after roaming client client roaming between AP's EWLCJ175S_CED_14 Checking the 11 ax To Verify the 11 ax Passed parameters for inter parameters status roaming client after client roaming between controllers EWLCJ175S_CED_15 Verifying the 11 ax To check the11 ax Passed status by changing parameters after the security type changing the security type EWLCJ175S_CED_16 Validating the 11ax To validate the 11 Passed status for Virtual ax parameters for EWLC vEWLC

HA Management Enhancements

Logical ID Title Description Status Defect ID EWLCJ175S_HA Configure HA setup To configure HA Passed Mangemt_01 using RP option. setup using RP option. EWLCJ175S_HA Validate the HA To validate the HA Passed Mangemt_02 setup parameters. setup parameters. EWLCJ175S_HA Unpairing HA setup To unpair the HA Passed Mangemt_03 using no RP-Method setup using no RP-Method EWLCJ175S_HA Configure HA SSO To Configure HA Passed Mangemt_04 RMI SSO RMI EWLCJ175S_HA Validate the HA To validate the HA Passed Mangemt_05 RMI parameters. RMI parameters.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 56

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_HA Update RMI To update RMI Passed Mangemt_06 configuration in configuration in eWLC UI and check eWLCUI and check the output the output EWLCJ175S_HA Enable gatway To enable gatway Passed Mangemt_07 failover, verify failover, verify output details and output details & monitor devices for monitor devices for switchover. switchover. EWLCJ175S_HA Force-switchover to To verify HA SSO Passed Mangemt_08 verify HA SSO RMI RMI behaviour on behaviour. force-switchover. EWLCJ175S_HA Enabling the RP To enable the RP Passed Mangemt_09 method with RMI method with RMI enabled already. option enabled already. EWLCJ175S_HA ISSU upgrade with To peform ISSU Passed Mangemt_10 HA SSO RMI upgrade in HA SSO RMI setup and monitor behaviour EWLCJ175S_HA Check ISSU To peform ISSU Passed Mangemt_11 downgrade with HA upgrade in HA SSO SSO RMI RMI setup and monitor behaviour EWLCJ175S_HA Client retention To verify client Passed Mangemt_12 during ISSU retention after ISSU upgrade/downgrade upgrade/downgrade EWLCJ175S_HA Force multiple To force multiple Passed Mangemt_13 switchover after switchover after upgrade to check if upgrade to check if RMI link is up or RMI link is up or not not EWLCJ175S_HA Validate licensing To validate licensing Passed Mangemt_14 information after information after ISSU ISSU upgrade/downgrade upgrade/downgrade EWLCJ175S_HA Validate licensing To validate licensing Passed Mangemt_15 information after information after multiple switchover multiple switchover and reload and reload EWLCJ175S_HA Clear RMI based To clear RMI based Passed Mangemt_16 configuration from configuration from UI UI

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 57

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_HA Clear RMI based To clear RMI based Passed Mangemt_17 configuration from configuration from CLI CLI EWLCJ175S_HA Configure HA SSO To configure HA Passed Mangemt_18 RMI after RP-clear SSO RMI after & validate HA RMI RP-clear & validate parameters. HA RMI parameters. EWLCJ175S_HA Verify HA setup To verify HA setup Passed Mangemt_19 details from Standby details in Standby console console EWLCJ175S_HA Check interfaces To check interfaces Passed Mangemt_20 state fromstandby state fromstandby console console EWLCJ175S_HA Check environment To monitor Passed Mangemt_21 details fromstandby environment details console from standby console EWLCJ175S_HA Check processusage To check process Passed Mangemt_22 details in standby usage details in console standby console EWLCJ175S_HA Monitor running To monitor running Passed Mangemt_23 process in Standby process in Standby unit from Active unit from Active unit console unit console EWLCJ175S_HA SSH to standby To SSH to standby Passed Mangemt_24 console directly and console directly and check connectivity check connectivity EWLCJ175S_HA Force multiple To force multiple Passed Mangemt_25 switchover and switchover and verify AP & client verify AP & client association association

Standby Monitoring Enhancements

Logical ID Title Description Status Defect ID EWLCJ175S_SME_01 Configure HA SSO To Configure HA Passed RMI & validate HA SSO RMI RMI parameters. EWLCJ175S_SME_02 Verify HA setup To verify HA setup Passed details from details in Standby Standby console console

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 58

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SME_03 Check interfaces To check interfaces Passed state fromstandby state fromstandby console console EWLCJ175S_SME_04 Check environment To monitor Passed details fromstandby environment details console from standby console EWLCJ175S_SME_05 Check process To check process Passed usage details in usage details in standby console standby console EWLCJ175S_SME_06 Monitor running To monitor running Passed process in Standby process in Standby unit from Active unit from Active unit console unit console EWLCJ175S_SME_07 SSH to standby To SSH to standby Passed console directly and console directly and check connectivity check connectivity EWLCJ175S_SME_08 SSH to standby To SSH to standby Passed console via AAA console via AAA authentication authentication EWLCJ175S_SME_09 SSH to standby To SSH to standby Passed console via Tacacs console via Tacacs authentication authentication EWLCJ175S_SME_10 Monitor health of To monitor health o Passed the system the system EWLCJ175S_SME_11 Preventing write To prevent write Passed access in standby access in standby console console EWLCJ175S_SME_12 Validating inventory To validate Passed information on inventory standby information on standby EWLCJ175S_SME_13 Check logging To check logging Passed information of information of standby chassis standby chassis EWLCJ175S_SME_14 Monitor failure fan To monitor failure Passed state via SNMP fan state via SNMP EWLCJ175S_SME_15 Validation of Auto To validate auto Passed upgrade scenario upgrade scenario from standby chassis

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 59

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

ISSU Data Model Support

Logical ID Title Description Status Defect ID EWLCJ175S_ISSU_Data_01 Configure HA To configure HA Passed setup using setup using RP/RMI option. RP/RMI option. EWLCJ175S_ISSU_Data_02 ISSU upgrade with To peform ISSU Passed HA SSO RMI upgrade in HA SSO RMI setup and monitor behaviour EWLCJ175S_ISSU_Data_03 Check ISSU To peformISSU Passed downgrade with upgrade in HA HA SSO RMI SSO RMI setup and monitor behaviour EWLCJ175S_ISSU_Data_04 Client retention To verify client Passed during ISSU retention after upgrade/downgrade ISSU upgrade/downgrade. EWLCJ175S_ISSU_Data_05 Performing To check whether Passed Rollback for the rollback controller using happening for ISSU. Controller image or not. EWLCJ175S_ISSU_Data_06 Disabling the To check that the Passed Rollback timer rollback doesn't druing upgrading happen for controller using Controller image ISSU. or not. EWLCJ175S_ISSU_Data_07 Aborting the To check whether Passed upgradation of the upgradation for Controller using Controller image is ISSU. aborted or not. EWLCJ175S_ISSU_Data_08 Performing To check whether Passed Upgradation for the Controller controller using Upgradation via ISSU via tftp tftp is happening or server. not. EWLCJ175S_ISSU_Data_09 Performing To check whether Passed Upgradation for the Controller Controller using Upgradation via ISSU via sftp sftp is happening server. or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 60

New Features Rejection of Wrong WLAN ID

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_ISSU_Data_10 Performing To check whether Passed Upgradation for the Controller controller using Upgradation via ISSU via http http is happening server. or not. EWLCJ175S_ISSU_Data_11 Checking the client To check whether Passed connectivity the client continuously connecting during the upgrade of AP EWLCJ175S_ISSU_Data_12 Profile addition To add profile Passed during ISSU during ISSU operation EWLCJ175S_ISSU_Data_13 Verify AP upgrade To verify AP Passed related during upgrade related ISSU during ISSU EWLCJ175S_ISSU_Data_14 Verfiy that To verfiy that Passed config-sync related config-sync related commands are not commands are not supported supported EWLCJ175S_ISSU_Data_15 ISSU support on To check ISSU Passed yang enabled support on yang scenario enabled scenario EWLCJ175S_ISSU_Data_16 APDP/APSP To check Passed support on yang APDP/APS P model enabled support on yang enabled scenario EWLCJ175S_ISSU_Data_17 SMU support on To check SMU Passed yang model support on yang enabled scenario EWLCJ175S_ISSU_Data_18 Validation of Auto To validate auto Passed upgrade scenario upgrade scenario EWLCJ175S_ISSU_Data_19 Rolling AP To check rolling Passed upgrade/AP AP upgrade/AP predownload predownload support on yang support on yang model model

Rejection of Wrong WLAN ID

Logical ID Title Description Status Defect ID

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 61

New Features Rejection of Wrong WLAN ID

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Rejection_01 Connecting a client To connect a client Passed to a dot 1x security to a dot1 x security without wlan id without wlan id being set being set and check if the clients gets connected EWLCJ175S_Rejection_02 Connecting a To connect a client Passed window client to a to a dot1 x security dot 1xsecurity with with wlan id being wlan id being set in set and check if the ISE clients gets connected or not EWLCJ175S_Rejection_03 Connecting a To connect a Passed Android client to a Android client to a dot 1xsecurity with dot1 x security with wlan id being set in wlan id being set ISE and check if the clients gets connected or not EWLCJ175S_Rejection_04 Connecting a IOS To connect a IOS Passed client to a dot 1x client to a dot1 x security with wlan security with wlan id being set in ISE id being set and check if the clients gets connected or not EWLCJ175S_Rejection_05 Connecting a Mac To connect a Mac Passed os client to a dot 1x os client to a dot1 x security with wlan security with wlan id being set in ISE id being set and check if the clients gets connected or not EWLCJ175S_Rejection_06 Connecting a client To connect a client Passed to a dot 1x security to a dot1 x security with wlan id being to 9115 AP with set in ISE using wlan id being set 9115 AP and check if the clients gets connected or not EWLCJ175S_Rejection_07 Connecting a client To connect a client Passed to a dot 1x security to a dot1 x security with wlan id being to 9120 AP with set in ISE using wlan id being set 9120 AP and check if the clients gets connected or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 62

New Features Rejection of Wrong WLAN ID

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Rejection_08 Connecting a client To connect a client Passed to a dot 1x security to a dot1 x security with wlan id being to 9130 AP with set in ISE using wlan id being set 9130 AP and check if the clients gets connected or not EWLCJ175S_Rejection_09 Connecting a client To connect a client Passed to a dot 1x security to a dot1 x security with wlan id being to 4800 AP with set in ISE using wlan id being set 4800 AP and check if the clients gets connected or not EWLCJ175S_Rejection_10 Configuring To configure Passed WLAN id attribute WLAN attribute to to one and making one ID and the Window clients connecting a to join the other window client to WLAN for which join other wlan to attribute is not set check the and check the behaviour behaviour EWLCJ175S_Rejection_11 Configuring To configure Passed WLAN id attribute WLAN attribute to to one and making one ID and the Android clients connecting a to join the other Android client to WLAN for which join other wlan to attribute is not set check the and check the behaviour behaviour EWLCJ175S_Rejection_12 Configuring To configure Passed WLAN id attribute WLAN attribute to to one and making one ID and the IOS clients to connecting a IOS join the other client to join other WLAN for which wlan to check the attribute is not set behaviour and check the behaviour

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 63

New Features Rejection of Wrong WLAN ID

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Rejection_13 Configuring To configure Passed WLAN id attribute WLAN attribute to to one and making one ID and the Mac OS clients connecting a Mac to join the other OS client to join WLAN for which other wlan to check attribute is not set the behaviour and check the behaviour EWLCJ175S_Rejection_14 Configuring To create multiple Passed Multiple Wlan id WLAN Id attributes set in ISE attributes in ISE and Window and connecting a Clients join Window client to different wlan the WLAN whose attribute is not configured in ISE to check the behaviour of the client EWLCJ175S_Rejection_15 Configuring To create multiple Passed Multiple Wlan id WLAN Id attributes set in ISE attributes in ISE and Android and connecting a Clients join Android client to different wlan the WLAN whose attribute is not configured in ISE to check the behaviour of the client EWLCJ175S_Rejection_16 Configuring To create multiple Passed Multiple Wlan id WLAN Id attributes set in ISE attributes in ISE and IOS Clients and connecting a join different wlan IOS client to the WLAN whose attribute is not configured in ISE to check the behaviour of the client

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 64

New Features Rejection of Wrong WLAN ID

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Rejection_17 Configuring To create multiple Passed Multiple Wlan id WLAN Id attributes set in ISE attributes in ISE and Mac OS and connecting a Clients join Mac OS client to different wlan the WLAN whose attribute is not configured in ISE to check the behaviour of the client EWLCJ175S_Rejection_18 Connecting a To Configure Passed Window Clients to multiple WLAN Id one of the wlan attributes in ISE defined in ISE and connecting a among the Multiple Window client to Wlan id attributes the WLAN among set in ISE the configured WLAN Id's check the behaviour of the client EWLCJ175S_Rejection_19 Connecting a To Configure Passed Android Clients to multiple WLAN Id one of the wlan attributes in ISE defined in ISE and connecting a among the Multiple Android client to Wlan id attributes the WLAN among set in ISE the configured WLAN Id's check the behaviour of the client EWLCJ175S_Rejection_20 Connecting a IOS To Configure Passed Clients to one of multiple WLAN Id the wlan defined in attributes in ISE ISE among the and connecting a Multiple Wlan id IOS client to the attributes set in ISE WLAN among the configured WLAN Id's check the behaviour of the client

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 65

New Features

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Rejection_21 Connecting a Mac To Configure Passed OS Clients to one multiple WLAN Id of the wlan defined attributes in ISE in ISE among the and connecting a Multiple Wlan id Mac OS client to attributes set in ISE the WLAN among the configured WLAN Id's check the behaviour of the client

Error Propagation for Exec Commands

Logical ID Title Description Status Defect ID EWLCJ175S_Error_01 Validate the To Validate the Passed command for command to clear clear_personal_ssid the SSID EWLCJ175S_Error_02 Validate the To Execute the Passed command for ap command for ap config to controller config EWLCJ175S_Error_03 Validate the To Execute the Passed command for ap command for ap country country EWLCJ175S_Error_04 Execute the To Validate the Passed command to get command to get crash data crash detail or not EWLCJ175S_Error_05 Validate the To Validate the Passed command for flash command for flash opertaion operation EWLCJ175S_Error_06 Execute the To Execute the Passed command port command and config details validate port config shown or not EWLCJ175S_Error_07 Execute the To Execute the Passed command for ap slot command for ap slot EWLCJ175S_Error_08 Validate the To Execute the Passed command to command for ap sniffing sniffing EWLCJ175S_Error_09 Validate the To Execute the Passed command for command for bss bss_color color EWLCJ175S_Error_10 Validate the To Execute the Passed commmand for dual command for dual band role band role

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 66

C H A P T E R 4

Regression Features - Test Summary

• APSP/APDP WebUI support, on page 68 • Fabric In A Box (webUI for Embedded Wireless on 9k Switches), on page 69 • WGB client support on ME, on page 71 • PSK + Multi-auth Support for EWC, on page 75 • EoGRE Support for ME, on page 77 • iPSK Peer-2-Peer Blocking, on page 78 • BSS Coloring on AX APs, on page 92 • CMX Parity for eWLC ME, on page 94 • EWC Day0 Support, on page 96 • TACACS, on page 98 • Mac filtering (for L2 security), on page 100 • Internal DHCP Server, on page 101 • 802.1x on Wave 2 AP( EAP-TLS & PEAP), on page 102 • Optimized Roaming, on page 104 • ICAP Support for C9130, on page 106 • mDNS gateway support for flex/Mobility Express , on page 108 • 200 Country Code, on page 110 • Explicit warning for configuration-triggered downtime, on page 111 • Client Debug Bundle for EWC, on page 113 • Active Config Visualization, on page 114 • Copy of webauth tar bundle in EWC HA setup, on page 115 • WGB support on EWC, on page 116 • Ethernet VLAN tag on AP, on page 120 • Smart Licensing, on page 123 • Multi LAG and Load Balance, on page 123 • AdvAP_QBSS_MCAST, on page 124 • OKC, on page 127 • TWT support on Axel AP, on page 130 • WPA3 Support, on page 130 • Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's, on page 133 • mDNS Support for Wired Guest Ac, on page 136 • PSK + Multi-auth Support, on page 137 • Inter Release Controller Mobility, on page 139

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 67

RegressionFeatures- TestSummary APSP/AP D P WebUI support REVIEW DRAFT - CISCO CONFIDENTIAL

• ISSU Enhancement(Zero downtime for Wireless N/W), on page 143 • Syslogs, on page 144 • CWA (Central Web Authentication), on page 145 • CMX Support for EWLC, on page 147 • MC2UC (Videostreaming), on page 149 • UL/DL OFDMA Support for 9130, on page 151 • Out of band access to standby, on page 151 • RLAN Support for Fabric and across all modes in IOS-XE, on page 152 • COS AP Packet Tracer, on page 155 • DL 11ax Mu-MIMO for (VC/SS) AP's, on page 157 • Web UI for Golden monitor for Packet drops, on page 160 • WGB Support for C9115 /9105AXI AP, on page 162 • Dynamic Protocol Pack Upgrade - WLC and AP, on page 164 • HA SSO RMI, on page 168 • Best Practices WebUI, on page 170 • Open dns, on page 171 • Config Wireless, on page 172 • SR Cases, on page 173

APSP/APDP WebUI support

Logical ID Title Description Status Defect ID EWCJ175S_Reg_01 Adding the APSP To check whether Passed configuration in the APSP EWC for AP image configuration is upgrade. added successfully and AP is upgraded or not. EWCJ175S_Reg_02 Adding the APDP To check whether Passed configuration in the APDP EWC for AP image configuration is upgrade. added successfully and AP is upgraded or not. EWCJ175S_Reg_03 Adding the To check whether Passed APSP/A PD P the APSP/APDP configuration in configuration is EWC for AP image added successfully upgrade using SFTP and AP is upgraded type. or not. EWCJ175S_Reg_04 Adding the To check whether Passed APSP/APDP the APSP/APDP configuration in configuration is EWC for AP image added successfully upgrade using FTP and AP is upgraded type. or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 68

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_05 Adding the To check whether Passed APSP/AP DP the APSP/APDP configuration in configuration is EWC for AP image added successfully upgrade using and AP is upgraded Device type. or not. EWCJ175S_Reg_06 Verifying whether To check whether Passed APSP/APDP is APSP/APDP is accepting a invalid accepting invalid file path. file path or not EWCJ175S_Reg_07 Verifying whether To check whether Passed APSP/APDP is APSP/APDP is accepting a invalid accepting invalid Ip ip address. address or not EWCJ175S_Reg_08 Verifying whether To check whether Passed APSP/APDP is APSP/APDP is accepting a invalid accepting invalid credentials. credentials or not EWCJ175S_Reg_09 Verifying whether To check whether Passed APSP/APDP is APSP/APDP is accepting a invalid accepting invalid credentials. credentials or not EWCJ175S_Reg_10 Connecting client To check whether Passed after upgrading AP connecting clients image using after the ap image APSP/APDP. upgradation using APSP/APDP

Fabric In A Box (webUI for Embedded Wireless on 9k Switches)

Logical ID Title Description Status Defect ID EWCJ175S_Reg_11 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9300 webUI on 9300 EWCJ175S_Reg_12 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9300 with webUI on 9300 and Window Client Windows Client EWCJ175S_Reg_13 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9300 with webUI on 9300 and Android Client Android Client

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 69

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _Reg_14 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9300 with MAC webUI on 9300 and Client MAC Client EWCJ175S _Reg_15 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9300 with Apple webUI on 9300 and Mobile Client Apple Mobile Client EWCJ175S _Reg_16 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9400 webUI on 9400 EWCJ175S _Reg_17 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9400 with webUI on 9400 and Window Client Windows Client EWCJ175S _Reg_18 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9400 with webUI on 9400 and Android Client Android Client EWCJ175S _Reg_19 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9400 with MAC webUI on 9400 and Client MAC Client EWCJ175S _Reg_20 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9400 with Apple webUI on 9400 and Mobile Client Apple Mobile Client EWCJ175S _Reg_21 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9500 webUI on 9500 EWCJ175S _Reg_22 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9500 with webUI on 9500 and Window Client Windows Client EWCJ175S _Reg_23 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9500 with webUI on 9500 and Android Client Android Client EWCJ175S _Reg_24 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9500 with MAC webUI on 9500 and Client MAC Client

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 70

RegressionFeatures- TestSummary WGB client support on ME

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_25 To Deploy Fabric To Verify Fabric UI Passed configuration from on 9500 with Apple webUI on 9500 and Mobile Client Apple Mobile Client

WGB client support on ME

Logical ID Title Description Status Defect ID EWCJ175S_Reg_26 Configuring the To change the Passed Capwap ap to capwap ap to autonomous AP autonomous ap and check if the AP is converted EWCJ175S_Reg_27 Configuring the To configure the Passed Autonomous AP as autonomous AP as the WGB WGB and check if the AP changes as WGB. EWCJ175S_Reg_28 Configuring WGB To verify WGB Passed in eWC configuration is successful or not in eWC EWCJ175S_Reg_29 Associating the To associate the Passed WGB on open WGB on open authentication with authentication and 9115 AP check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_30 Associating the To associate the Passed WGB on open WGB on open authentication with authentication with flex+bridge 9115 AP flex+bridge AP and check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_31 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with PSK security with flex+bridge AP 9115 AP flex+bridge AP and check if the WGB associates with the WLAN or not.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 71

RegressionFeatures- TestSummary WGB client support on ME

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _Reg_32 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x securitywith flex+bridge AP 9115 flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S _Reg_33 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to flex+bridge mode another AP when Aps are in flex+bridge mode EWCJ175S _Reg_34 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP flex+bridge in AP flex+bridge mode mode EWCJ175S _Reg_35 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S _Reg_36 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S _Reg_37 Associating the To check WGB Passed WGB on open client association security with local with OPEN security authentication and local authentication EWCJ175S _Reg_38 Checking To verify Passed Reassociation reassociation for happens for WGB WGB clients afte clients after session session timeout timeout EWCJ175S _Reg_39 Performing local To verify local Passed switching for WGB switching traffic for clients with 9115 client with 9115 AP AP

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 72

RegressionFeatures- TestSummary WGB client support on ME

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_291 Configuring the To change the Passed Capwap ap to capwap ap to autonomous AP autonomous ap and check if the AP is converted EWCJ175S_Reg_292 Configuring the To configure the Passed Autonomous AP as autonomous AP as the WGB WGB and check if the AP changes as WGB. EWCJ175S_Reg_293 Configuring WGB To verify WGB Passed in EWC configuration is successful or not in EWC EWCJ175S_Reg_294 Validating the client To validate the List Passed connected to WGB of all clients connected to WGB EWCJ175S_Reg_295 Associating the To associate the Passed WGB on open WGB on open authentication with authentication and 9115 AP check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_296 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with 9115 PSK security with bridge AP 9115 bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_297 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x security 9115 AP when AP in local mode and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_298 Associating the To associate the Passed WGB on open WGB on open authentication with authentication with flex+bridge 9115 AP flex+bridge AP and check if the WGB associates with the open WLAN or not.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 73

RegressionFeatures- TestSummary WGB client support on ME

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_299 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with PSK security with flex+bridge AP 9115 AP flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_300 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x securitywith flex+bridge AP 9115 flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_301 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to bridge mode another AP when the AP is in bridge mode . EWCJ175S_Reg_302 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to flex+bridge mode another AP when Aps are in flex+bridge mode EWCJ175S_Reg_303 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP flex+bridge in AP flex+bridge mode mode EWCJ175S_Reg_304 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S_Reg_305 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP flex+bridge mode flex+bridge mode

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 74

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_306 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP bridge mode in AP bridge mode EWCJ175S_Reg_307 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP bridge mode bridge mode EWCJ175S_Reg_308 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP bridge mode bridge mode EWCJ175S_Reg_309 Associating the To check WGB Passed WGB on open client association security with local with OPEN security authentication and local authentication EWCJ175S_Reg_310 Checking To verify Passed Reassociation reassociation for happens for WGB WGB clients afte clients after session session timeout timeout EWCJ175S_Reg_311 Performing local To verify local Passed switching for WGB switching traffic for clients with 9115 client with 9115 AP AP

PSK + Multi-auth Support for EWC

Logical ID Title Description Status Defect ID EWCJ175S_Reg_40 Creating Wlan with Verify Wlan Passed WPA2 Secutirywith Creating with MPSK WPA2Secutirywith MPSK EWCJ175S_Reg_41 Edit WPA2 Secutiry Verify Wlan Edit Passed PSK Keys on MPSK with WPA2 Secutiry with MPSK EWCJ175S_Reg_42 Delete WPA2 Verify Wlan Delete Passed Secutiry PSK Keys with WPA2Secutiry on MPSK with MPSK

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 75

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _Reg_43 Creating Wlan with Verify Creating Passed WPA2 Secutiry with Wlan with WPA2 MPSK - Format Secutiry with MPSK with Hexa: - Format with Hexa: EWCJ175S _Reg_44 Creating Wlan with Verify the Security Passed WPA2 Secutiry with Type with Advance MPSK - Password Security Type : AES : EWCJ175S _Reg_45 Verify WPA2 Verify WPA2 Passed Secutiry with MPSK Secutiry with MPSK Applied in Wlan's Applied in Wlan's with Window's with Window's Clients with all the Clients with all the 5 Key Combinations 5 Key Combinations EWCJ175S _Reg_46 Connect the MAC Verify Connect the Passed Clients MAC Clients with all the 5 Key Combinations EWCJ175S _Reg_47 Connect the Android Verify Connect the Passed Clients Android Clients with all the 5 Key Combinations: EWCJ175S _Reg_48 Connect the Apple Verify Connect the Passed Mobile Clients with Apple Clients with all the 5 Key all the 5 Key Combinations: Combinations: EWCJ175S _Reg_49 Connect the Verify Connect the Passed Windows Clients Windows Clients with all the 5 Key with all the 5 Key Combinations: Combinations: EWCJ175S _Reg_50 MPSK with Ap Verify the Passed Model 9115 Configurations with Ap Different Ap Model 9115 EWCJ175S _Reg_51 Connect Ap Model Verify the Passed 9120 Configurations with Ap Different Ap Model 9120: EWCJ175S _Reg_52 Connect Ap Model Verify the Passed 4800 Configurations with Ap Different Ap Model 4800: EWCJ175S _Reg_53 Connect Ap Model Verify the Passed 3800 Configurations with Ap Different Ap Model 3800

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 76

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_54 Connect Ap Model Verify the Passed 3700 Configurations with Ap Different Ap Model 3700 EWCJ175S_Reg_55 Connect Ap Model Verify the Passed 1532 Configurations with Ap Different Ap Model 1532:

EoGRE Support for ME

Logical ID Title Description Status Defect ID EWCJ175S_Reg_56 Creating EoGRE To check whether Passed Tunnel Gateway. the tunnel gateway is created or not. EWCJ175S_Reg_57 Creating EoGRE To check whether Passed Tunnel Domain the tunnel Domain is created or not. EWCJ175S_Reg_58 Configuring the To check whether Passed Global Parameter the global for the EoGRE. parameters are configured or not. EWCJ175S_Reg_59 Configuring the To check whether Passed tunnel Profile. the tunnel profile is created or not. EWCJ175S_Reg_60 Associate the To check whether Passed WLAN to the the wlan is Wireless policy associated with the profile. policy profile. EWCJ175S_Reg_61 Adding a policy tag To check whether Passed and site tag to AP the policy and site tag is added to an AP. EWCJ175S_Reg_62 Checking the client To check whether Passed connectivity. the client is connected or not EWCJ175S_Reg_63 Getting the EoGRE To check whether Passed tunnel from PI the tunnel is exported from PI or not EWCJ175S_Reg_64 Connect the ios To check whether Passed clients and check the the ios clients get connectivity. connected successfully.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 77

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _Reg_65 Connect the mac os To check whether Passed clients andcheck the the mac os clients connectivity. get connected successfully. EWCJ175S _Reg_66 Checking the traffic To check whether Passed in the tunnel. the traffic in the tunnel is managed or not. iPSK Peer-2-Peer Blocking

Logical ID Title Description Status Defect ID EWCJ175S_Reg_67 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When Window JOS Client Window JOS in EWC UI/CLI connected to iPSK enabled WLAN Profile EWCJ175S_Reg_68 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected MAC or not When MAC OS Client in EWC OS connected to UI/CLI iPSK enabled WLAN Profile EWCJ175S_Reg_69 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected iOS or not When iOS Client in EWC connected to iPSK UI/CLI enabled WLAN Profile EWCJ175S_Reg_70 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When Android Client in Android connected EWC UI/CLI to iPSK enabled WLAN Profile EWCJ175S_Reg_71 Verifying peer to To verify whether Passed peer communication windows JOS of Windows JOS clients are able to clients while sharing ping each other or same iPSK tag not when they share the same iPSK tag

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 78

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_72 Verifying peer to To verify whether Passed peer communication MAC OS clients are of MAC clients able to ping each while sharing same other or not when iPSK tag they share the same iPSK tag EWCJ175S_Reg_73 Verifying peer to To verify whether Passed peer communication iOS clients are able of iOS clients while to ping eachother or sharing same iPSK not when they share tag the same iPSK tag EWCJ175S_Reg_74 Verifying peer to To verify whether Passed peer communication windows Android of Android clients OS clients are able while sharing same to ping eachother or iPSK tag not when they share the same iPSK tag EWCJ175S_Reg_75 Verifying peer to To verify whether Passed peer communication windows JOS of Windows JOS clients are able to clients while sharing ping each other or different iPSK tag not when they share the different iPSK tag EWCJ175S_Reg_76 Verifying peer to To verify whether Passed peer communication MAC OS clients are of MAC clients able to ping each while sharing other or not when different iPSK tag they share the different iPSK tag EWCJ175S_Reg_77 Verifying peer to To verify whether Passed peer communication iOS clients are able of iOS clients while to ping eachother or sharing different not when they share iPSK tag the different iPSK tag EWCJ175S_Reg_78 Verifying peer to To verify whether Passed peer communication windows Android of Android clients OS clients are able while sharing to ping eachother or different iPSK tag not when they share the different iPSK tag

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 79

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_79 Verifying peer to To verify whether Passed peer communication the different of different OS platform OS clients clients when clients can ping each other share same iPSK or not when they Tag share thesame iPSK tag EWCJ175S_Reg_80 Verifying peer to To verify whether Passed peer communication the different of different OS platform OS clients clients when clients can ping each other share different iPSK or not when they Tag share thesame iPSK tag EWCJ175S_Reg_81 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with same iPSK tag can ping each other in case of central or not when they switching mode share thesame iPSK tag with central Switching EWCJ175S_Reg_82 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with same iPSK tag can ping each other in case of local or not when they switching share thesame iPSK tag with local switching EWCJ175S_Reg_83 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with different iPSK can ping each other tag in case of central or not when they switching mode share the different iPSK tag with central Switching EWCJ175S_Reg_84 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with different iPSK can ping each other tag in case of local or not when they switching share the different iPSK tag with local switching

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 80

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_85 Verifying connected To verify whether Passed clients with the all the clients particular iPSK tag sharing iPSK tagare in CLI shown or not in EWC CLI EWCJ175S_Reg_86 Verifying the wlan To verify whether Passed configuration with wlan profile can be iPSK tag created or not with Configuration the iPSK through EWC Web configuration through the EWC Web EWCJ175S_Reg_87 Verifying the wlan To verify whether Passed generation with wlan profile can be iPSK tag created or not with Configuration the iPSK through EWC CLI configuration through the EWC CLI EWCJ175S_Reg_88 Verifying iPSK tag To verify whether Passed for the for different iPSK tag is OS clients with generated or not for Flex+Bridge Mode the connected clients EWCJ175S_Reg_89 Verifying clients To verify whether Passed connectivity with clients iPSK is iPSK tag while being generated radius fallback is from secondary enabled AAA server or not EWCJ175S_Reg_90 Verifying To verify whether Passed generation of iPSK iPSK generated or tag with FT-PSKfor not when WLAN is different OS clients enabled with FT-PSK EWCJ175S_Reg_91 Verifying To verify whether Passed connectivity among the different the clients when platform OS clients clients are can ping each other connected to or not based on the different WLAN iPSK tag EWCJ175S_Reg_92 Verifying iPSK To verify whether Passed WLAN the wlan configuration after configuration retains importing and same or not after exporting thhe same exporting the same configuration file configuration file

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 81

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_93 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with same iPSK tag each other or not in case of central when they share the switching mode same iPSK tag with central Switching EWCJ175S_Reg_94 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with same iPSK tag each other or not in case of local when they share the switching same iPSK tag with local switching EWCJ175S_Reg_95 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with different iPSK each other or not tag in case of central when they share the switching mode different iPSK tag with central Switching EWCJ175S_Reg_96 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with different iPSK each other or not tag in case of local when they share the switching different iPSK tag with local switching EWCJ175S_Reg_97 Verifying iPSK tag To verify whether Passed for the for Same OS iPSK tag is clients with generated or not for Flex+Bridge Mode the connected clients EWCJ175S_Reg_98 Verifying To verify whether Passed generation of iPSK iPSK generated or tag with FT-PSKfor not when WLAN is same OS clients. enabled with FT-PSK forsame OS Clients.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 82

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_99 Verifying peer to To verify whether Passed peer action of same the same platform OS clients with OS clients can ping different iPSK tag in each other or not case of local when they share the switching with different iPSK tag in FT-PSK. case of local switching with FT-PSK. EWCJ175S_Reg_100 Verifying peer to To verify whether Passed peer action of the different different OS clients platform OS clients with different iPSK can ping each other tag in case of local or not when they switching with share the different FT-PSK iPSK tag in case of local switching with FT-PSK for the EWCJ175S_Reg_101 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When anyconnect Client in Anyconnect client EWC UI/CLI connected to iPSK enabled WLAN Profile EWCJ175S_Reg_102 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the same password or not for the same with different password with groups. different groups EWCJ175S_Reg_103 Verifying the To verify whether Failed CSCvw84280 generation of ipsk iPSK generated or tag with not when WLAN is WPA-TKIP- PSk for enabled with same/different os WPA-TkIP-PSK clients. EWCJ175S_Reg_104 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in same network group same network group in case of Central in case of central Switching. switching.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 83

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S _Reg_105 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in Different network different network groups in case of group in case of central switching. central switching. EWCJ175S _Reg_106 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in same network group same network group in case of Local in case of local Switching. switching. EWCJ175S _Reg_107 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in Different network different network group in case of group in case of local switching. local switching. EWCJ175S _Reg_108 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for Same OS for Same OS clients clients with with Flex+Bridge Flex+Bridge Mode Mode in case of in case of local local switchingwith switching with same same group group EWCJ175S _Reg_109 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for different OS for different OS clients with clients with Flex+Bridge Mode Flex+Bridge Mode in case of local in case of local switching with same switching with same group group

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 84

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_110 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for Same OS for Same OS clients clients with with Flex+Bridge Flex+Bridge Mode Mode in case of in case of local local switchingwith switching with different group different group EWCJ175S_Reg_111 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for different OS for different OS clients with clients with Flex+Bridge Mode Flex+Bridge Mode in case of local in case of local switching with switching with different group different group EWCJ175S_Reg_112 Verifying clients To verify whether Passed roaming with same the client is roaming iPSK tag from one Ap to another Ap. EWCJ175S_Reg_113 Verifying clients To verify whether Passed roaming with the client is roaming different iPSK tag from one Ap to another Ap. EWLCJ175S_Reg_117 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When Window JOS Client Window JOS in eWLC UI/CLI connected to iPSK enabled WLAN Profile EWLCJ175S_Reg_118 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected MAC or not When MAC OS Client in eWLC OS connected to UI/CLI iPSK enabled WLAN Profile EWLCJ175S_Reg_119 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected iOS or not When iOS Client in eWLC connected to iPSK UI/CLI enabled WLAN Profile

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 85

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_120 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When Android Client in Android connected eWLC UI/CLI to iPSK enabled WLAN Profile EWLCJ175S_Reg_121 Verifying peer to To verify whether Passed peer communication windows JOS of Windows JOS clients are able to clients while sharing ping each other or same iPSK tag not when they share the same iPSK tag EWLCJ175S_Reg_122 Verifying peer to To verify whether Passed peer communication MAC OS clients are of MAC clients able to ping each while sharing same other or not when iPSK tag they share the same iPSK tag EWLCJ175S_Reg_123 Verifying peer to To verify whether Passed peer communication iOS clients are able of iOS clients while to ping eachother or sharing same iPSK not when theyshare tag the same iPSK tag EWLCJ175S_Reg_124 Verifying peer to To verify whether Passed peer communication windows Android of Android clients OS clients are able while sharing same to ping eachother or iPSK tag not when theyshare the same iPSK tag EWLCJ175S_Reg_125 Verifying peer to To verify whether Passed peer communication windows JOS of Windows JOS clients are able to clients while sharing ping each other or different iPSK tag not when they share the different iPSK tag EWLCJ175S_Reg_126 Verifying peer to To verify whether Passed peer communication MAC OS clients are of MAC clients able to ping each while sharing other or not when different iPSK tag they share the different iPSK tag

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 86

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_127 Verifying peer to To verify whether Passed peer communication iOS clients are able of iOS clients while to ping eachother or sharing different not when theyshare iPSK tag the different iPSK tag EWLCJ175S_Reg_128 Verifying peer to To verify whether Passed peer communication windows Android of Android clients OS clients are able while sharing to ping eachother or different iPSK tag not when theyshare the different iPSK tag EWLCJ175S_Reg_129 Verifying peer to To verify whether Passed peer communication the different of different OS platform OS clients clients when clients can ping each other share same iPSK or not when they Tag share the same iPSK tag EWLCJ175S_Reg_130 Verifying peer to To verify whether Passed peer communication the different of different OS platform OS clients clients when clients can ping each other share different iPSK or not when they Tag share the same iPSK tag EWLCJ175S_Reg_131 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with same iPSK tag can ping each other in case of central or not when they switching mode share the same iPSK tag with central Switching EWLCJ175S_Reg_132 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with same iPSK tag can ping each other in case of local or not when they switching share the same iPSK tag with local switching

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 87

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_133 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with different iPSK can ping each other tag in caseof central or not when they switching mode share the different iPSK tag with central Switching EWLCJ175S_Reg_134 Verifying peer to To verify whether Passed peer action of the different connected clients platform OS clients with different iPSK can ping each other tag in case of local or not when they switching share the different iPSK tag with local switching EWLCJ175S_Reg_135 Verifying connected To verify whether Passed clients with the all the clients particular iPSK tag sharing iPSK tag are in CLI shown or not in eWLC CLI EWLCJ175S_Reg_136 Verifying the wlan To verify whether Passed configuration with wlan profile can be iPSK tag created or not with Configuration the iPSK through eWLC Web configuration through the eWLC Web EWLCJ175S_Reg_137 Verifying the wlan To verify whether Passed generation with wlan profile can be iPSK tag created or not with Configuration the iPSK through eWLC CLI configuration through the eWLC CLI EWLCJ175S_Reg_138 Verifying iPSK tag To verify whether Passed for the for different iPSK tag is OS clients with generated or not for Flex+Bridge Mode the connected clients EWLCJ175S_Reg_139 Verifying clients To verify whether Passed connectivity with clients iPSK is iPSK tag while being generated radius fallback is from secondary enabled AAA server or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 88

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_140 Verifying To verify whether Passed generation of iPSK iPSK generated or tag with FT-PSKfor not when WLAN is different OS clients enabled with FT-PSK EWLCJ175S_Reg_141 Verifying To verify whether Passed connectivity among the different the clients when platform OS clients clients are can ping each other connected to or not based on the different WLAN iPSK tag EWLCJ175S_Reg_142 Verifying iPSK To verify whether Passed WLAN the wlan configuration after configuration retains importing and same or not after exporting thhe same exporting the same configuration file configuration file EWLCJ175S_Reg_143 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with same iPSK tag each other or not in case of central when they share the switching mode same iPSK tag with central Switching EWLCJ175S_Reg_144 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with same iPSK tag each other or not in case of local when they share the switching same iPSK tag with local switching EWLCJ175S_Reg_145 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with different iPSK each other or not tag in caseof central when they share the switching mode different iPSK tag with central Switching EWLCJ175S_Reg_146 Verifying peer to To verify whether Passed peer action of the same platform connected clients OS clients can ping with different iPSK each other or not tag in case of local when they share the switching different iPSK tag with local switching

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 89

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_147 Verifying iPSK tag To verify whether Passed for the for Same OS iPSK tag is clients with generated or not for Flex+Bridge Mode the connected clients EWLCJ175S_Reg_148 Verifying To verify whether Passed generation of iPSK iPSK generated or tag with FT-PSKfor not when WLAN is same OS clients. enabled with FT-PSK forsame OS Clients. EWLCJ175S_Reg_149 Verifying peer to To verify whether Passed peer action of same the same platform OS clients with OS clients can ping different iPSK tag in each other or not case of local when they share the switching with different iPSK tag in FT-PSK. case of local switching with FT-PSK. EWLCJ175S_Reg_150 Verifying peer to To verify whether Passed peer action of the different different OS clients platform OS clients with different iPSK can ping each other tag in case of local or not when they switching with share the different FT-PSK iPSK tag in case of local switching with FT-PSK for the EWLCJ175S_Reg_151 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the Connected or not When anyconnect Client in Anyconnect client eWLC UI/CLI connected to iPSK enabled WLAN Profile EWLCJ175S_Reg_152 Verifying the iPSK To verify whether Passed tag generation for iPSK tag generated the same password or not for the same with different password with groups. different groups EWLCJ175S_Reg_153 Verifying the To verify whether Passed generation of ipsk iPSK generated or tag with not when WLAN is WPA-TKIP- PSk for enabled with same/different os WPA-TkIP-PSK clients.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 90

RegressionFeatures- TestSummary iPSK Peer-2-PeerBlock in g

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_154 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in same network group same network group in case of Central in case of central Switching. switching. EWLCJ175S_Reg_155 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in Different network different network groups in case of group in case of central switching. central switching. EWLCJ175S_Reg_156 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in same network group same network group in case of Local in case of local Switching. switching. EWLCJ175S_Reg_157 Verifying the peer To Verify the peer Passed to peer to peer communication of communication of different clients different clients connected to connected to different SSIDs in different SSIDs in Different network different network group in case of group in case of local switching. local switching. EWLCJ175S_Reg_158 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for Same OS for Same OS clients clients with with Flex+Bridge Flex+Bridge Mode Mode in case of in case of local local switchingwith switching with same same group group

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 91

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_159 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for different OS for different OS clients with clients with Flex+Bridge Mode Flex+Bridge Mode in case of local in case of local switching with same switching with same group group EWLCJ175S_Reg_160 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for Same OS for Same OS clients clients with with Flex+Bridge Flex+Bridge Mode Mode in case of in case of local local switchingwith switching with different group different group EWLCJ175S_Reg_161 Verifying iPSK tag To verify whether Passed and peer to peer iPSK tag andpeer to communication for peer communication the for different OS for different OS clients with clients with Flex+Bridge Mode Flex+Bridge Mode in case of local in case of local switching with switching with different group different group EWLCJ175S_Reg_162 Verifying clients To verify whether Passed roaming with same the client is roaming iPSK tag from one Ap to another Ap. EWLCJ175S_Reg_163 Verifying clients To verify whether Passed roaming with the client is roaming different iPSK tag from one Ap to another Ap.

BSS Coloring on AX APs

Logical ID Title Description Status Defect ID EWCJ175S_Reg_114 Configuring To Check whether Passed Automatic BSS automatic BSS coloring for 2.4 ghz coloring is applied AP radios or not in 2.4 ghz ap radio

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 92

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_115 Configuring To Check whether Passed automatic BSS color automatic BSS for 5ghzradio coloring is applied or not in 5 ghz ap radio EWCJ175S_Reg_116 Configuring auto To verify whether Passed BSS color appering different BSS 2.4 to 5 Ghz radio or coloring is occur vice versa while Changing the AP radios 2.4 to 5 viseversa EWCJ175S_Reg_117 Configuring Manual To Check whether Passed BSS color Manual BSS configuration for coloring is applied 2.4/5 ghz radio or not in 2.4 ghz ap radio EWCJ175S_Reg_118 Verifying the static To Check whether Passed BSS color Static BSS coloring assignment for the 5 is applied or not in 5 ghz radio in ghz ap radio Flex-connect mode EWCJ175S_Reg_119 Checking the To verify whether Passed manual BSS different BSS coloring while coloring is occur changing the AP while Changing the radio from 2.4 ghz AP radios to 5 ghz EWCJ175S_Reg_120 Checking the BSS To Check whether Passed color details are the BSS color retained after AP retained after AP & and Controller Controller reload reload EWCJ175S_Reg_121 Verifying BSS To verify whether Passed coloring with Intra BSS coloring with client roaming by client roaming using 9115AP between AP's or not EWCJ175S_Reg_122 Verifying BSS To check whether Passed coloring with inter BSS coloring is roming client using appearing or not , different radio when different radio clients are roaming between controllers

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 93

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_123 Verifying BSS To check whether Passed coloring with inter BSS coloring is roming client using appearing or not , same radio when same radio clients are roaming between controllers EWCJ175S_Reg_124 Capturing the To check the Passed Windows client window client connectivity & BSS connectivity & BSS coloring using coloring using Wireshark Wireshark EWCJ175S_Reg_125 Capturing the To check the Passed Android client Android client connectivity & BSS connectivity & BSS coloring using coloring using Wireshark Wireshark EWCJ175S_Reg_126 Capturing the Mac To check the Mac Passed OS client OS client connectivity & BSS connectivity & BSS coloring using coloring using Wireshark Wireshark EWCJ175S_Reg_127 Changing 9115 AP To change the mode Passed mode from local to of AP from local Flex connect & mode to Flexconnect check the BSS mode and check the coloring BSS coloring Configuration configuration in 9115 Ap EWCJ175S_Reg_128 Changing 9115 AP To change the mode Passed mode from flex to of AP from flex local & check the mode to local mode BSS coloring and check the BSS Configuration coloring configuration in 9115 Ap

CMX Parity for eWLC ME

Logical ID Title Description Status Defect ID EWCJ175S_Reg_129 Adding eWC-MEto To Check Whether Passed CMX & CMX to the eWLC-MEgets DNAC added to CMX & CMX added to DNAC successfully or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 94

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_130 Connecting the IOS To connect a IOS Passed Client to the access Client to the access point on the floor point on the floor and check the details and check if the of the Client. details of the IOS Clients are shown correctly or not. EWCJ175S_Reg_131 Connecting the To connect a Passed MacOS Client to the MacOS Client to the access point on the access point on the floor and check the floor and check if details of the Client. the details of the MacOS Clients are shown correctly or not. EWCJ175S_Reg_132 Connecting the To connect a Passed Android Client to Android Client to the access point on the access point on the floor and check the floor and check the details of the if the details of the Client. IOS Clients are shown correctly or not. EWCJ175S_Reg_133 Connecting many To connect many Passed Clients from Client from different different place and place to the access check the location o points and check if the Clients the location of the Client are shown in CMX EWCJ175S_Reg_134 Connecting a 2.4 To connecta 2.4 ghz Passed ghz Client to the Client to the access access point which point on the floor is placed in floor and check if the and checking the details of the Clients client details are shown correctly or not. EWCJ175S_Reg_135 Connecting a 5 ghz To connect a 5 ghz Passed Client to the access Client to the access point which is point on the floor placed in floor and and check if the checking the client details of the Clients details are shown correctly or not.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 95

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_136 Connecting a Dual To connect a Dual Passed band Client to the band Client to the access point which access point on the is placed in floor floor and check if and checking the the details of the client details Clients are shown correctly or not.

EWCJ175S_Reg_137 Verify the To check whether Passed Disconnected client the client is details in CMX disconnected or not in CMX EWCJ175S_Reg_138 Verifying the Intra To verify whether Passed client roaming in the client is roaming CMX between AP's or not EWCJ175S_Reg_139 Verifying the Inter To verify whether Passed client roaming in the clients are CMX roaming between controllers EWCJ175S_Reg_140 Verifying the Wired To Check whether Passed client details in the Wired client CMX details are showing or not in CMX EWCJ175S_Reg_141 Verifying the guest To Check whether Passed LAN client details the Guest LAN in CMX client details are showing or not in CMX EWCJ175S_Reg_142 Verifying MIMO To check Whether Passed client details using all the clients getting Wireshark same BW & data rate or not

EWC Day0 Support

Logical ID Title Description Status Defect ID EWCJ175S_Reg_143 Provisioning the Verify that user is Passed eWLC_MEin day0 able to Provisioned via PnP profile the eWLC_MEin day0 via PnP profile or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 96

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_144 Manualy adding Verify that user is Passed single device Pnp able to Provisioned details and the eWLC_MEin Provisioning the day0 after adding 9115AX eWLC_ME Pnp Details manualy in day0 EWCJ175S_Reg_145 Adding the device Verify that user is Passed details in PnP with able to Provisioned importing the .csv the 1815eWLC_ME file in Bulk devices in day0 after adding option Pnp Details with importing .csv file EWCJ175S_Reg_146 Checking the image Verifying the image Passed version after version after Provisioning Provisioning Ewlc_ME with PnP Ewlc_ME with PnP EWCJ175S_Reg_147 Checking the AP Verifying the AP Passed details after details after Provisioning Provisioning Ewlc_ME with PnP Ewlc_ME with PnP EWCJ175S_Reg_148 Checking WLANs To verify whether Passed broadcasting or not WLANs are after provisioning broadcasting or not after provisioning EWCJ175S_Reg_149 Connecting client to Verifying the client Passed created WLAN and details after checking the client connecting WLAN details EWCJ175S_Reg_150 Configuring wrong To verify whether Passed DNAC IP address in user is able to switch and trying for Provisioned the the provisioning eWLC_MEwith providing wrong DNAC IP in Switch EWCJ175S_Reg_151 Configuring wrong To verify whether Passed details for PnP while user is able to claming the device Provisioned the eWLC_MEwith providing wrong PnP configuration in DNAC EWCJ175S_Reg_152 Checking the Verifying whether Passed eWLC_MEafter user able to bring configuring factory device to day0 or reset with save notwith save config config as yes

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 97

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

TACACS

Logical ID Title Description Status Defect ID EWCJ175S_Reg_153 Allowing the user To check whether Passed for complete access user can able to to ME EWLC read-write access network via the complete ME TACACS EWLC network or not via TACACS EWCJ175S_Reg_154 Providing the user To check whether Passed for lobby admin user can able to access to the ME have lobby admin EWLC via access or not to ME TACACS EWLC via TACACS EWCJ175S_Reg_155 Providing the user To check whether Passed for monitoring user can able to access to the ME have monitoring EWLC via access (which is TACACS read-only) or not to ME EWLC via TACACS EWCJ175S_Reg_156 Trying to login ME To check whether Passed EWLC via user can able to TACACS with login or not in ME invalid credentials EWLC via TACACS with invalid credentials EWCJ175S_Reg_157 Providing the user To check whether Passed for selected access user can able to to the MEEWLC have access with the via TACACS selected checkbox's like "WLAN" and "Controller" checkboxes. EWCJ175S_Reg_158 Providing the user To check whether Passed for selected access user can able to to the MEEWLC have access with the via TACACS selected checkbox's like "Wireless" and "Security" checkboxes.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 98

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_159 Providing the user To check whether Passed for selected access user can able to to the MEEWLC have access with the via TACACS selected checkbox's like "Command" and "Management" checkboxes. EWCJ175S_Reg_160 Providing the user To check whether Passed for selected access user can able to to the MEEWLC have access with the via TACACS selected checkbox's klie"WLAN,Conrtoelr,Wreles,Securyti,Commands Line Interfaces and "Management" checkboxes. EWCJ175S_Reg_161 Trying to login ME To verify whether Passed EWLC network via user can able to TACACS with login or not in ME Invalid credentials. EWLC via TACACS with invalid credentials EWLCJ175S_Reg_195 Allowing the user To check whether Passed for complete access user can able to to eWLC network read-write access via TACACS the complete eWLC network or not via TACACS EWLCJ175S_Reg_196 Providing the user To check whether Passed for lobby admin user can able to access to the eWLC have lobby admin via TACACS access or not to eWLC via TACACS EWLCJ175S_Reg_197 Providing the user To check whether Passed for monitoring user can able to access to the eWLC have monitoring via TACACS access (which is read-only) or not to eWLC via TACACS EWLCJ175S_Reg_198 Trying to login To check whether Passed eWLC via user can able to TACACS with login or not in invalid credentials eWLC via TACACS with invalid credentials

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 99

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_199 Providing the user To check whether Passed for selected access user can able to to the eWLC via have access with the TACACS selected checkbox's like "WLAN" and "Controller" checkboxes. EWLCJ175S_Reg_200 Providing the user To check whether Passed for selected access user can able to to the eWLC via have access with the TACACS selected checkbox's like "Wireless" and "Security" checkboxes. EWLCJ175S_Reg_201 Providing the user To check whether Passed for selected access user can able to to the eWLC via have access with the TACACS selected checkbox's like "Command" and "Management" checkboxes. EWLCJ175S_Reg_202 Providing the user To check whether Passed for selected access user can able to to the eWLCvia have access with the TACACS selected checkbox's lkie"WLAN,Controel,rWreles,Secutyri,Commands Line Interfaces and "Management" checkboxes. EWLCJ175S_Reg_203 Trying to login To verify whether Passed eWLC network via user can able to TACACS with login or not in Invalid credentials. eWLC via TACACS with invalid credentials

Mac filtering (for L2 security)

Logical ID Title Description Status Defect ID EWCJ175S_Reg_162 Adding Windows 10 To add the windows Passed Client mac address Client mac address in eWC and in mac filtering in checking the eWC and checking connection of whether Clients gets Clients associated or not successfullyin

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 100

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_163 Uploading the Tocheckwhether an Passed empty CSV file in blank CSV file eWC UI could beuploaded in eWC UI EWCJ175S_Reg_164 Importing the .CSV To check whether Passed file with .CSV file gets modifications in imported ornot after eWC importing the updated file with some changes in it EWCJ175S_Reg_165 Connecting the To Connect the Passed Client with wlan Client with wlan security mac security mac filtering + WPA filtering + WPA personal personal EWCJ175S_Reg_166 Connecting the To Connect the Passed Client with wlan Client with wlan security mac security mac filtering + WPA filtering + WPA enterprise enterprise EWCJ175S_Reg_167 Connecting the To Connect the Passed Client with Wlan Client with MAC Security Type as Filtering using WPA WPA Enterprise Enterprise as enabling MAC security type Filtering option choosing Choosing Authentication Authentication Server as External Server as External Radius and Radius and RADIUS RADIUS Compatibility as Compatibility as other other EWCJ175S_Reg_168 Connecting the To Connect the Passed client after client Client after client identity account identity account expired in ISE expired in ISE EWCJ175S_Reg_169 Connecting the To Connect the Passed Client and then client and then moving it to block blocking it using the using MAC address MAC address

Internal DHCP Server

Logical ID Title Description Status Defect ID

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 101

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_170 Mapping a Internal To verify whether a Passed DHCP pool to window client get Ip WLAN and address and vlan id verifying Windows from a specified Client IP Address DHCP pool or not and vlan id EWCJ175S_Reg_171 Mapping a Internal To verify whether a Passed DHCP pool to Android client get Ip WLAN and address and vlan id verifying Android from a specified Client IP Address DHCP pool or not and vlan id EWCJ175S_Reg_172 Mapping a Internal To verify whether a Passed DHCP pool to MAC Os client get WLAN and Ip address and vlan verifying MAC id from a specified Client IP Address DHCP pool or not and vlan id EWCJ175S_Reg_173 Mapping a Internal To verify whether a Passed DHCP pool to iOS client get Ip WLAN and address and vlan id verifying iOS Client from a specified IP Address and vlan DHCP pool or not id EWCJ175S_Reg_174 Checking lease To verify whether Passed period for connected DHCP release a Client through a particular IP address DHCP pool or not after a certain lease period for client

802.1x on Wave 2 AP( EAP-TLS & PEAP)

Logical ID Title Description Status Defect ID EWCJ175S_Reg_175 Enabling dot1xauth To check whether Passed for AP and ioining AP joins WLC or AP to WLC not after dot1x authentication from Switch/ISE EWCJ175S_Reg_176 Associating To check whether Passed Windows clients to Windows clients AP joined via Dot1x associated authentication successfully or not once AP joined via dot1x authentication from Switch/ISE

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 102

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_177 Joining COS AP to To check whether Passed WLC through COS AP joins WLC Dot1x+PEAP or not after dot1x authentication authentication from Switch/ISEvia EAP method PEAP EWCJ175S_Reg_178 Joining iOS AP to To check whether Passed WLC through iOS AP joins WLC Dot1x+EAP TLS or not after dot1x authentication authentication from Switch/ISEvia EAP method TLS EWCJ175S_Reg_179 Trying to join AP's To check whether Passed through Dot1x AP's joins WLC or authentication with not through LSC LSC provisioning provisioning & dot1x authentication EWCJ175S_Reg_180 Providing invalid To check whether Passed credentials for AP AP throws error authentication and message or not checking the status when invalid of AP in console credentials provided during dot1x authentication EWCJ175S_Reg_181 Disabling dot1x To check whether Passed support in Switch AP joins WLC or and trying to not even dot1xis associate AP via disabled in switch Dot1x authentication to WLC EWCJ175S_Reg_182 Enabling dot1xauth Configuring the Passed for AP in 3850 3850 Switch for Switch Dot1x authentication by mapping the identity profiles to a port. EWCJ175S_Reg_183 Checking the To check whether Passed configuration of 802.1x auth 802.1x parameters restores authentication or not after paramaters after export/import the export/import the config file in WLC config file UI via TFTP

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 103

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_184 Associating Mac OS To check whether Passed clients to AP joined Mac OS clients via Dot1x associated authentication successfully or not once AP joined via dot1x authentication from Switch/ISE EWCJ175S_Reg_185 Associatin g Android To check whether Passed clients to AP joined Android clients via Dot1x associated authentication successfully or not once AP joined via dot1x authentication from Switch/ISE EWCJ175S_Reg_186 Associating iOS To check whether Passed clients to AP joined iOS clients via Dot1x associated authentication successfully or not once AP joined via dot1x authentication from Switch/ISE EWCJ175S_Reg_187 Trying to configure To check whether Passed of 802.1x Read only user can authentication be able to configure paramaters via or not the 802.1x Read-only User auth parameters in WLC UI

Optimized Roaming

Logical ID Title Description Status Defect ID EWCJ175S_Reg_188 Configuring To verify that Passed optimized roaming optimized roaming with 2.4 GHz band with 2.4 GHz band and roam Android gets configured or client not and check association of Android client EWCJ175S_Reg_189 Configuring To verify that Passed optimized roaming optimized roaming with 2.4 GHz band with 2.4 GHz band,1 ,1 MBPS Thresholds MBPS Thresholds and roam Android gets configured or client not and check association of Android client

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 104

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_190 Configuring To verify that Passed optimized roaming optimized roaming with 5 GHz band with 5 GHz band and roamt Android and check client association of Android client EWCJ175S_Reg_191 Configuring To verify that Passed optimized roaming optimized roaming with 5 GHz band , 6 with 5 GHz band , 6 MBPS Threshold MBPS Threshold and roam Android configured and client check association of Android client EWCJ175S_Reg_192 Configuring To verify that Passed optimized roaming optimized roaming with 2.4 GHz band with 2.4 GHz band ,5.5 MBPS ,5.5 MBPS Threshold and roam Threshold iOS client configured successfully and check association of iOS client EWCJ175S_Reg_193 Configuring To verify that Passed optimized roaming optimized roaming with 2.4 GHz band with 2.4 GHz band ,9 MBPS ,9 MBPS Threashold and Threashold roam iOS client configured and check association of iOS client EWCJ175S_Reg_194 Configuring To verify that Passed optimized roaming optimized roaming with 5 GHz band with 5 GHz band and roamiOS client &customized interval(40 Sec) configured succesfully and check association of iOS client EWCJ175S_Reg_195 Configuring To verfiy that Passed optimized roaming optimized roaming with 5 GHz band , with 5 GHz band , 12 MBPS Threshold 12 MBPS Threshold and roamiOS client configured succesfully and check association of iOS client

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 105

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_196 Moving the To verify that client Passed Andoroid client got disassocited from AP after when signal is poor enable optimized while moving from roaming AP EWCJ175S_Reg_197 Moving the iOS To verify that client Passed client from AP after wouldn't disabling the disassocited when optimized roaming signal is poor while moving from AP EWCJ175S_Reg_198 Moving the Android To verify that client Passed client from AP after got disassocited enable optimized when signal is poor roaming in ME with while moving from interference 2700 AP with availability interference availability EWCJ175S_Reg_199 Connect iOS client To verify that iOS Passed from where SSID client connecting or signal is week not from where SSID signal is week EWCJ175S_Reg_200 Restarting the ME To verify that Passed eWC after optimized optimization roaming roaming configuration configuration remain same after reboot EWCJ175S_Reg_201 Importing/exporting To verify that Passed configuration file optimization after optimized roaming roaming configuring configuration remain same after import and export configuration file

ICAP Support forC9130

Logical ID Title Description Status Defect ID EWCJ175S_Reg_202 Packet capture of To capture the Passed client when the Packet of the client client is connected when the client is to 9130 AP with 2.4 connected to AP GHz with radio as 2.4 GHz in EWC

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 106

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_203 Packet capture of To capture the Passed client when the Packet of the client client is connected when the client is to 9130 AP with 5 connected to AP GHz with radio as 5 GHz in EWC EWCJ175S_Reg_204 Packet capture for To verify the packet Passed Android client using capture for Android Intellingent Capture client using option in Apgroup Intelligent capture in APgroup EWCJ175S_Reg_205 Packet capture for To verify the packet Passed Windows JOS client capture for using Intellingent Windows client Capture option in using Intelligent APgroup capture in APgroup EWCJ175S_Reg_206 Packet capture for To verify the packet Passed IOS client using capture for IOS Intellingent Capture client using option in APgroup Intelligent capture in APgroup EWCJ175S_Reg_207 Packet capture for To verify the packet Passed Mac OS client using capture for MAC Intellingent Capture OS client using option in APgroup Intelligent capture in APgroup EWCJ175S_Reg_208 Capturing of Packet To capture packet Passed of the client when when the client is the client is connected to the iOS connected with open AP with security as security OPEN in EWC EWCJ175S_Reg_209 Capturing of Packet To capture packet Passed of the client when when the client is the client is connected to the iOS connected with AP with security as WPA 2 PSK WPA 2 PSK in security EWC EWCJ175S_Reg_210 Capturing of Packet To capture packet Passed of the client when when the client is the client is connected to the iOS connected with AP with security as WPA 2 Enterprise WPA 2 Enterprise in security EWC

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 107

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_211 Capturing of Packet To capture packet Passed of the client when when the client is the client is connected to the AP connected with with security as captive portal-web Captive consent portal-webconsent EWCJ175S_Reg_212 Packet capture for To verify the packet Passed Anyconnect client capture for using Intellingent Anyconnect client Capture option in using Intelligent APgroup page capture in APgroup page EWCJ175S_Reg_213 Packet capture for To verify the packet Passed Windows JOS client capture for using Intellingent Windows JOS client Capture option in using Intelligent AP page capture in AP page EWCJ175S_Reg_214 Packet capture for To verify the packet Passed Android client using capture for Android Intellingent Capture client using option in AP page Intelligent capture in AP page EWCJ175S_Reg_215 Packet capture for To verify the packet Passed iOS client using capture for iOS Intellingent Capture client using option in AP page Intelligent capture in AP page EWCJ175S_Reg_216 Packet capture for To verify the packet Passed MacOS client using capture for MacOS Intellingent Capture client using option in AP page Intelligent capture in AP page EWCJ175S_Reg_217 Packet capture for To verify the packet Passed Anyconnect client capture for using Intellingent Anyconnect client Capture option in using Intelligent AP page capture in AP page mDNS gateway support for flex/Mobility Express

Logical ID Title Description Status Defect ID EWCJ175S_Reg_218 Checking the mDNS Ap To check whether mDNS Passed with Flex connect group AP with Flex connect configuration. group configurations are able to configure or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 108

RegressionFeatures- TestSummary mDNS gateway support forflex/Mobility Express

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_219 Creating mDNS profile To verify whether mDNS Passed by adding required profile is created with services required services EWCJ175S_Reg_220 Checking mDNS Tocheckwhether themdns Passed gateway are applying to gateway applying to Apple Apple Tv clients after Tv clients or not after enabling the mdns AP to enabling the mDNS-ap to 9115AP 9115AP. EWCJ175S_Reg_221 Checking mDNS Tocheckwhether the mdns Passed gateway are applying to gateway applying to Mac Mac OS clients after OS and Apple Tv clients enabling the mdns AP to after enabling the 9120AP mDNS-ap to 9120AP EWCJ175S_Reg_222 Checking mDNS To verify mDNS gateway Passed gateway are applied to are applied to AppleTV Apple TVand and authentication server authentication server as as radius in ME. radius in ME EWCJ175S_Reg_223 Checking mDNS Tocheckwhether the mdns Passed gateway are applying to gateway applying to Mac Mac OS and Apple Tv OS and Apple Tvclients or clients after enabling the not after enabling the mdns AP to 4800AP mDNS-ap to 4800AP. EWCJ175S_Reg_224 Verifying the mDNS To check whether mDNS Passed gateway configurations gateway configurations after changing the AP after changing the AP mode to monitor from mode to Monitor fromflex flex EWCJ175S_Reg_225 Checking mDNS Tocheckwhether the mdns Passed gateway are applying to gateway are applying to Apple iPad and Apple Apple iPad and Apple chromecast clients with chromecast clients with Static WEPsecurityafter Static WEP security or not enabling the mdns AP to after enabling the 9130/9115/4800/9120/3700AP's mDNS-ap to9130/9115/4800/9120/3700AP's. EWCJ175S_Reg_226 Checking mDNS Verifying mDNS gateway Passed gateway are applied to are applied to Mac OS with MAC OS with wlanopen open ssid security EWCJ175S_Reg_227 Checking mDNS Verifying mDNS gateway Passed gateway are applied to are applied to MacOS and MacOS and IOS with IOS with WPA2 personal wlan WPA2 personal security security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 109

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_228 Checking mDNS To Check mDNS gateway Passed gateway are applied to are applied to MacOS and MacOS and IOS with IOS with WPA3-SAE wlan WPA3-SAE security security EWCJ175S_Reg_229 Checking mDNS To Check mDNS gateway Passed gateway are applied to are applied to Apple Apple Devices with Fast Devices with fasttransition transition enabled enabled EWCJ175S_Reg_230 Performing client To Check whether client Passed communication between communicate between two two clients connected clients connected to two different vlan different vlan EWCJ175S_Reg_231 Performing roaming To Check the roaming Passed operation when mDNS is operation when mDNS is applied applied EWCJ175S_Reg_232 Checking mDNS config To check whether the Passed after exporting config file mDNS config is same after exporting config file EWCJ175S_Reg_233 Checking mDNS To verify whether mDNS Passed gateway are applied to gateway are applied to IOS IOS with wlan Static with Static WEP SSID WEP security EWCJ175S_Reg_234 Verifying the mDNS To Verify the mDNS Passed configuration in DNAC gateway configuration in DNAC

EWCJ175S_Reg_235 Verifying mDNS To verify the mDNS Passed configuration Via EWC configuration through CLI EWC CLI

200 Country Code

Logical ID Title Description Status Defect ID EWCJ175S_Reg_237 Verifying the To Check whether Passed country code by Mac OS clients are connecting Mac OS connected clients. successfully after a change in the country code. EWCJ175S_Reg_240 Verifying the To Check whether Passed Configuration of the the country code is country code during configured during day 0 Configuration. day 0 Configuration.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 110

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_241 Verifying the To Check whether Passed country code by android clients are connecting Android connected clients. successfully after a change in the country code. EWCJ175S_Reg_243 Verifying the To Check whether Passed country code by Windows clients are connecting connected Windows clients. successfully after a change in the country code.

Explicitwarningforconfiguration-triggereddowntime

Logical ID Title Description Status Defect ID EWCJ175S_Reg_244 Verifying the To verify the Passed warning message warning message after changing after changing AP/RF/Site tags AP/RF / site Tag EWCJ175S_Reg_245 Checking the To check the Passed warning message for warning message for after changing the changing Ap tag in AP tag in Flex mode flex mode AP AP EWCJ175S_Reg_246 Validating the To Validate the Passed warning message for warning message for after changing the changing RF tag in RF tag in flex mode flex mode AP AP EWCJ175S_Reg_247 Verifying the To Verify the Passed warning message for warning message for after changing the changing Site tag in Site tag in Flex flex mode AP mode AP EWCJ175S_Reg_248 Verifying the To Verify the Passed warning message for warning message for after changing the changing Ap tag in AP tag in Local Local mode AP mode AP EWCJ175S_Reg_249 Verifying the To Verify the Passed warning message for warning message for after changing the changing RF tag in RF tag in Local Local mode AP mode AP

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 111

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_250 Verifying the To Verify the Passed warning message for warning message for after changing the changing Site tag in Site tag in Local local mode AP mode AP EWCJ175S_Reg_251 Verifying the To verify whether Passed warning message by the warningmessage editing the policy showing or not after Tag in WLAN editing Policy Tag in WLAN EWCJ175S_Reg_252 Checking the To check the Passed Warning message warning message for for editing the editing the Policy policy profile profile EWCJ175S_Reg_253 Checking the To verify the Passed Warning message warning message for after AP reboot after AP reboot EWCJ175S_Reg_254 Checking warning To check whether Passed message after AP the warning message radio change showing or not after changing the AP radio EWCJ175S_Reg_255 Verifying the To Verify the Passed warning message for warning message for different AP models different AP models EWCJ175S_Reg_256 Validating the To validate the Passed warning message warning message for after disjoin the AP after Ap disjoin EWCJ175S_Reg_257 Verifying the To verify the Passed warning message warning message for after deleting the deleted client client EWCJ175S_Reg_258 Verifying the To verify the Passed warning message warning message after 2.4/5 ghz radio after 2.4/5 ghz radio down down EWCJ175S_Reg_259 Verifying the To validate the Passed warning message by warning message by changing the AP ip changing the AP ip Address Address EWCJ175S_Reg_260 Validating the To validate the Passed warning message for warning message for Virtual EWLC vEWLC

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 112

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_261 Checking the To validate the Passed warning message warning message after deleting the AP after deleting the AP tag tag EWCJ175S_Reg_262 Checking the To validate the Passed warning message warning message after deleting the RF after deleting the RF tag tag EWCJ175S_Reg_263 Checking the To validate the Passed warning message warning message after deleting the after deleting the Site tag Site tag EWCJ175S_Reg_264 monitoring the To check the Passed warning message warning message for after chaging AP tag changing Ap tag via Via CLI CLI EWCJ175S_Reg_265 monitoring the To check the Passed warning message warning message for after chaging RF tag changing RF tag via Via CLI CLI EWCJ175S_Reg_266 monitoring the To check the Passed warning message warning message for after chaging site tag changing Site tag Via CLI via CLI EWCJ175S_Reg_267 monitoring the To check the Passed warning message warning message after AP after AP provisioning from provisioning from DNAC DNAC

Client Debug Bundle for EWC

Logical ID Title Description Status Defect ID EWCJ175S_Reg_268 Verify the tech To Verify the tech Passed wireless command wireless command EWCJ175S_Reg_269 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9115 details , keep alive in 9115

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 113

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_270 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9117 details , keep alive in 9117 EWCJ175S_Reg_271 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9120 details , keep alive in 9120 EWCJ175S_Reg_272 Verify the debugs To Verify the Passed error , events, info , debugs error , payload , client events, info , details , keep alive payload , client in 9130 details , keep alive in 9130 EWCJ175S_Reg_273 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different MAC with different MAC clients clients EWCJ175S_Reg_274 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different Android with different clients Android clients EWCJ175S_Reg_275 Verify mobility stats To Verify mobility Passed on Controller with stats on Controller different Windows with different clients Windows clients

Active Config Visualization

Logical ID Title Description Status Defect ID EWCJ175S_Reg_276 verify the virtual To verify the virtual Passed config in EWC 9115 config in EWC 9115 EWCJ175S_Reg_277 verify the virtual To verify the virtual Passed config in EWC 9117 config in EWC 9117 EWCJ175S_Reg_278 verify the virtual To verify the virtual Passed config in EWC 9120 config in EWC9120 EWCJ175S_Reg_279 verify the virtual To verify the virtual Passed config in EWC 9130 config in EWC9130

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 114

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

Copy ofwebauth tar bundle in EWC HAsetup

Logical ID Title Description Status Defect ID EWCJ175S_Reg_280 Download WebAuth To Download Passed Bundle with TFTP WebAuth Bundle option with TFTP option EWCJ175S_Reg_281 Download WebAuth To Download Passed Bundle with FTP WebAuth Bundle option with FTP option EWCJ175S_Reg_282 Download WebAuth To Download Passed Bundle with SFTP WebAuth Bundle option with SFTP option EWCJ175S_Reg_283 Download WebAuth To Download Passed Bundle with HTTP WebAuth Bundle option with HTTP option EWCJ175S_Reg_284 Verify Pop-up/Alert To Verify Passed when space is low Pop-up/Alert when FTP space is low FTP EWCJ175S_Reg_285 VerifyPop-up/Alert To Passed when space is low VerifyPop-up/Alert SFTP when space is low SFTP EWCJ175S_Reg_286 VerifyPop-up/Alert To Passed when space is low VerifyPop-up/Alert TFTP when space is low TFTP EWCJ175S_Reg_287 Verify tar file To Verify tar file Passed should have been should have been copied to both copied to both bootflash and bootflash and stby-bootflash in stby-bootflash in EWC 9115 EWC 9115 EWCJ175S_Reg_288 Verify tar file To Verify tar file Passed should have been should have been copied to both copied to both bootflash and bootflash and stby-bootflash in stby-bootflash in EWC 9117 EWC 9117 EWCJ175S_Reg_289 Verify tar file To Verify tar file Passed should have been should have been copied to both copied to both bootflash and bootflash and stby-bootflash in stby-bootflash in EWC 9120 EWC 9120

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 115

RegressionFeatures- TestSummary WGB support on EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_290 Verify tar file To Verify tar file Passed should have been should have been copied to both copied to both bootflash and bootflash and stby-bootflash in stby-bootflash in EWC 9130 EWC 9130

WGB support on EWC

Logical ID Title Description Status Defect ID EWCJ175S_Reg_26 Configuring the To change the Passed Capwap ap to capwap ap to autonomous AP autonomous ap and check if the AP is converted EWCJ175S_Reg_27 Configuring the To configure the Passed Autonomous AP as autonomous AP as the WGB WGB and check if the AP changes as WGB. EWCJ175S_Reg_28 Configuring WGB To verify WGB Passed in eWC configuration is successful or not in eWC EWCJ175S_Reg_29 Associating the To associate the Passed WGB on open WGB on open authentication with authentication and 9115 AP check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_30 Associating the To associate the Passed WGB on open WGB on open authentication with authentication with flex+bridge 9115 AP flex+bridge AP and check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_31 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with PSK security with flex+bridge AP 9115 AP flex+bridge AP and check if the WGB associates with the WLAN or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 116

RegressionFeatures- TestSummary WGB support on EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_32 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x securitywith flex+bridge AP 9115 flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_33 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to flex+bridge mode another AP when Aps are in flex+bridge mode EWCJ175S_Reg_34 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP flex+bridge in AP flex+bridge mode mode EWCJ175S_Reg_35 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S_Reg_36 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S_Reg_37 Associating the To check WGB Passed WGB on open client association security with local with OPEN security authentication and local authentication EWCJ175S_Reg_38 Checking To verify Passed Reassociation reassociation for happens for WGB WGB clients afte clients after session session timeout timeout EWCJ175S_Reg_39 Performing local To verify local Passed switching for WGB switching traffic for clients with 9115 client with 9115 AP AP

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 117

RegressionFeatures- TestSummary WGB support on EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_291 Configuring the To change the Passed Capwap ap to capwap ap to autonomous AP autonomous ap and check if the AP is converted EWCJ175S_Reg_292 Configuring the To configure the Passed Autonomous AP as autonomous AP as the WGB WGB and check if the AP changes as WGB. EWCJ175S_Reg_293 Configuring WGB To verify WGB Passed in EWC configuration is successful or not in EWC EWCJ175S_Reg_294 Validating the client To validate the List Passed connected to WGB of all clients connected to WGB EWCJ175S_Reg_295 Associating the To associate the Passed WGB on open WGB on open authentication with authentication and 9115 AP check if the WGB associates with the open WLAN or not. EWCJ175S_Reg_296 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with 9115 PSK security with bridge AP 9115 bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_297 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x security 9115 AP when AP in local mode and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_298 Associating the To associate the Passed WGB on open WGB on open authentication with authentication with flex+bridge 9115 AP flex+bridge AP and check if the WGB associates with the open WLAN or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 118

RegressionFeatures- TestSummary WGB support on EWC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_299 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with PSK security with flex+bridge AP 9115 AP flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_300 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x securitywith flex+bridge AP 9115 flex+bridge AP and check if the WGB associates with the WLAN or not. EWCJ175S_Reg_301 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to bridge mode another AP when the AP is in bridge mode . EWCJ175S_Reg_302 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP in from one AP to flex+bridge mode another AP when Aps are in flex+bridge mode EWCJ175S_Reg_303 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP flex+bridge in AP flex+bridge mode mode EWCJ175S_Reg_304 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP flex+bridge mode flex+bridge mode EWCJ175S_Reg_305 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP flex+bridge mode flex+bridge mode

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 119

RegressionFeatures- TestSummary Ethernet VLAN tag on AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_306 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security in AP bridge mode in AP bridge mode EWCJ175S_Reg_307 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security in AP security in AP bridge mode bridge mode EWCJ175S_Reg_308 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security in AP security in AP bridge mode bridge mode EWCJ175S_Reg_309 Associating the To check WGB Passed WGB on open client association security with local with OPEN security authentication and local authentication EWCJ175S_Reg_310 Checking To verify Passed Reassociation reassociation for happens for WGB WGB clients afte clients after session session timeout timeout EWCJ175S_Reg_311 Performing local To verify local Passed switching for WGB switching traffic for clients with 9115 client with 9115 AP AP

Ethernet VLAN tag on AP

Logical ID Title Description Status Defect ID EWCJ175S_Reg_312 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 9115 AP from eWC the 9115 AP after CLI. reboot and join back to the EWC. EWCJ175S_Reg_313 Unassign the VLAN To Verify the Passed tag to the 9115 AP VLAN tag status of from EWC CLI. the 9115 AP after reboot and join back to the EWC.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 120

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_314 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 9120 AP from EWC the 9120 AP after CLI. reboot and join back to the EWC. EWCJ175S_Reg_315 Unassign the VLAN To Verify the Passed tag to the 9120 AP VLAN tag status of from EWC CLI. the 9120 AP after reboot and join back to the EWC. EWCJ175S_Reg_316 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 9130 AP from EWC the 9130 AP after CLI. reboot and join back to the EWC. EWCJ175S_Reg_317 Unassign the VLAN To Verify the Passed tag to the 9130 AP VLAN tag status of from EWC CLI. the 9130 AP after reboot and join back to the EWC. EWCJ175S_Reg_318 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 4800 AP from EWC the 4800 AP after CLI. reboot and join back to the EWC. EWCJ175S_Reg_319 Unassign the VLAN To Verify the Passed tag to the 4800 AP VLAN tag status of from EWC CLI. the 4800 AP after reboot and join back to the EWC. EWCJ175S_Reg_320 Check the VLAN To verify whether Passed tag is overriding or the VLAN tag is not via CLI overriding or not after assigning VLAN Tag to the particular Ap EWCJ175S_Reg_321 Check the VLAN To verify whether Passed tag is overriding or the VLAN tag is not via GUI overriding or not after assigning to new VLAN tag to particular Ap EWCJ175S_Reg_322 Checking the VLAN To check the VLAN Passed Tag after DCA tag after changing Mode change DCA mode

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 121

RegressionFeatures- TestSummary Ethernet VLAN tag on AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_323 Checking the VLAN To check the VLAN Passed Tag after changing tag after changing Radio band radio band EWCJ175S_Reg_324 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 9115/9120/9130 the 9115/9120/9130 AP's from EWC CLI AP's after reboot and connect the and join back to the Android Client. EWC and Verify the Android client connectivity. EWCJ175S_Reg_325 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 9115/9120/9130 the 9115/9120/9130 AP's from EWCCLI AP's after reboot and connect the and join back to the Windows Client. EWC and Verify the Windows client connectivity. EWCJ175S_Reg_326 Providing the To Verify the Failed CSCvx02719 VLAN tag to the VLAN tag status of conf 9115/9120/9130 the 9115/9120/9130 AP's fromEWCCLI AP's after reboot and connect the IOS and join back to the Client. EWC and Verify the IOS client connectivity. EWCJ175S_Reg_327 Providing the To Verify the Failed CSCvx02724 VLAN tag to the VLAN tag status of 9115/9120/9130 the 9115/9120/9130 AP's from EWCCLI AP's after reboot and connect the and join back to the anyconnect Client. EWC and Verify the anyconnect client connectivity. EWCJ175S_Reg_328 Providing the To Verify the Passed VLAN tag to the VLAN tag status of Group of AP's from the Group of AP's EWC CLI. after reboot andjoin back to the EWC. EWCJ175S_Reg_329 Unassign the VLAN To Verify the Passed tag to the Group of VLAN tag status of AP's from EWC the Group of AP's CLI. after reboot andjoin back to the EWC.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 122

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWCJ175S_Reg_330 Providing the To Verify the Passed VLAN tag to the VLAN tag status of Catalyst AP's from the Catalyst AP's EWC CLI and after changing the change the mode of mode of the AP to the AP to Monitor monitor from local. from local. EWCJ175S_Reg_331 Providing the To Verify the Passed VLAN tag to the VLAN tag status of Catalyst AP from the Catalyst AP's EWC CLI and after changing the change the mode of mode of the AP to the AP to flex from flex from local. Local. EWCJ175S_Reg_332 Providing the To Verify the Passed VLAN tag to the VLAN tag status of 4800 AP from EWC the 4800 AP after CLI and change the changing the mode mode of the AP to of the AP to sniffer sniffer from Local. from local.

Smart Licensing

Logical ID Title Description Status Defect ID EWCJ175S_Reg_333 Smart Account To verify smart Passed Creation, Account Creation, registration and registration and activation. activation. EWCJ175S_Reg_334 Generate token from To Generate token Passed CSSM from CSSM EWCJ175S_Reg_335 Product instance To verify Product Failed CSCvx09134 direct-connect using instance trust token direct-connect using trust token

Multi LAG and Load Balance

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_01 To Verify the Multi To Verify the Multi Passed LAG and Load LAG and Load balancing on balancing on 9800-40 Controller. 9800-40 Controller.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 123

RegressionFeatures- TestSummary AdvAP_QBSS_MC AST

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_02 To Verify the Multi To Verify the Multi Passed LAG and Load LAG and Load balancing on balancing on 9800-80 Controller. 9800-80 Controller. EWLCJ175S_Reg_03 To Verify the Multi To Verify the Multi Failed CSCvw63135 LAG and Load LAG and Load balancing on 9800-L balancing on 9800-L Controller. Controller. EWLCJ175S_Reg_04 To Verify the Multi To Verify the Multi Passed LAG and Load LAG and Load balancing on balancing on 9800-40 Controller 9800-40 Controller after Switch failure after Switch failure EWLCJ175S_Reg_05 To Verify the Multi To Verify the Multi Passed LAG and Load LAG and Load balancing on balancing on 9800-80 Controller 9800-80 Controller after Switch failure after Switch failure EWLCJ175S_Reg_06 To Verify the Multi To Verify the Multi Passed LAG and Load LAG and Load balancing on 9800-L balancing on 9800-L Controller after Controller after Switch failure Switch failure

AdvAP_QBSS_MCAST

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_07 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as allowed withqbss as allowed withqbss load for policy load for policy profile. profile. EWLCJ175S_Reg_08 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as Required with as required with qbss load for policy qbss load for policy profile. profile

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 124

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_09 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as Required with no as allowed with no qbss load for policy qbss load for policy profile. profile. EWLCJ175S_Reg_10 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as Required with as required with qbss load for qbss load for local_auth policy Local_auth policy profile. profile EWLCJ175S_Reg_11 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by upload/download upload/download the config uratio n the config uratio n file from controller file from controller EWLCJ175S_Reg_12 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as Required with as required with qbss load for policy qbss load for policy profile and profile and Flexmode AP. Flexmode AP EWLCJ175S_Reg_13 Verify the QBSS To check whether Passed load information in QBSS load showing Beacon and Probes in Beacon and Probe fames by frames or not by configuring WMM configuring WMM as Required with as required with qbss load for policy qbss load for policy profile and Bridge profile and Bridge mode AP. mode AP EWLCJ175S_Reg_14 Verify the AP name To check whether Passed in Beacon and AP name in Beacon Probes fames by and Probes fames by configuring Aironet configuring Aironet IE. IE.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 125

RegressionFeatures- TestSummary AdvAP_QBSS_MC AST

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_15 Verify the AP name To check whether Passed in Beacon and AP name in Beacon Probes fames by and Probes fames by configuring Aironet configuring Aironet IE with modified AP IE with Modified name. AP name. EWLCJ175S_Reg_16 Verify the AP name To check whether Passed in Beacon and AP name in Beacon Probes fames by and Probes fames by configuring Aironet configuring Aironet IE and IE and upload/download upload/download the configuration the configuration file from controller. file from controller. EWLCJ175S_Reg_17 Verify the AP name To check whether Passed in Beacon and AP name in Beacon Probes fames by and Probes fames by configuring Aironet configuring Aironet IE with more than IE with more than 15 characters of AP 15 characters of AP name. name. EWLCJ175S_Reg_18 Verify the AP name To check whether Passed in Beacon and AP name in Beacon Probes fames by and Probes fames by configuring Aironet configuring Aironet IE and rejoin the IE and rejoin the AP's to eWLC-2 AP's to eWLC-2 from eWLC-1. from eWLC-1. EWLCJ175S_Reg_19 Verify the Multicast To verify the Passed filter and MC2UC Multicasat filter and traffic to local-switching local-sw itc hin g client subscribed to client videostreaming receives MC2UC traffic EWLCJ175S_Reg_20 Verify the Multicast To verify the Passed filter and MC2UC Multicasat filter and traffic to central-switching Central-switching client subscribed to client videostreaming receives MC2UC traffic

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 126

RegressionFeatures- TestSummary OKC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_21 Verify the Multicast To verify whether Passed filter and Flex AP client reassociates reboot in connected and receives mode when Flex LS MC2UC traffic client receiving when flex AP is MC2UC traffic rebooted in connected mode with multicast filter. EWLCJ175S_Reg_22 Verify the Multicast To verify the Passed filter and MC2UC Multicasat filter traffic to client subscribed to Central-switching videostreaming client after receives MC2UC Downloa d/u ploa d traffic after the configuration download/upload file to controller the configuration file from controller

OKC

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_23 Configure and verify To check whether Passed the OKC to the OKC configured to WLAN WLAN or not. configuration. EWLCJ175S_Reg_24 Configure and verify To check whether Passed the OKC to roaming happening WPA3-SAEWLAN or not after with Inter roaming. configuring the OKC to WPA3-SAE WLAN. EWLCJ175S_Reg_25 Configure and verify To check whether Passed the OKC to intra roaming WPA3-SAEWLAN happening or not with Intra roaming. after configuring the OKC to WPA3-SAE WLAN. EWLCJ175S_Reg_26 Configure and verify To check whether Passed the OKC to roaming happening WPA2-PSK WLAN or not after with Inter roaming. configuring the OKC to WPA2-PSK WLAN.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 127

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_27 Configure and verify To check whether Passed the OKC to intra roaming WPA2-PSK WLAN happening or not with Intra roaming. after configuring the OKC to WPA2-PSK WLAN. EWLCJ175S_Reg_28 Configure and verify To check whether Passed the OKC to OPEN roaming happening security WLAN or not after with Inter roaming. configuring the OKC to OPEN security WLAN. EWLCJ175S_Reg_29 Configure and verify To check whether Passed the OKC to OPEN intra roaming security WLAN happening or not with Intra roaming. after configuring the OKC to OPEN security WLAN. EWLCJ175S_Reg_30 Configure and verify To check whether Passed the OKC to roaming happening WPA2-802.1x or not after WLAN with Inter configuring the roaming. OKC to WPA2-80 2.1x WLAN. EWLCJ175S_Reg_31 Configure and verify To check whether Passed the OKC to intra roaming WPA2-802.1x happening or not WLAN with Intra after configuring the roaming. OKC to WPA2-80 2.1x WLAN. EWLCJ175S_Reg_32 Configure and verify To check whether Passed the OKC to roaming happening WPA3-802.1x or not after WLAN with Inter configuring the roaming. OKC to WPA3-802.1x WLAN. EWLCJ175S_Reg_33 Configure and verify To check whether Passed the OKC to intra roaming WPA3-802.1x happening or not WLAN with Intra after configuring the roaming. OKC to WPA3-802.1x WLAN.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 128

RegressionFeatures- TestSummary OKC

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_34 Configure and verify To check whether Passed the OKC to roaming happening WPA2-Ft-PSK or not after WLAN with Inter configuring the roaming. OKC to WPA2-Ft-PSK WLAN. EWLCJ175S_Reg_35 Configure and verify To check whether Passed the OKC to intra roaming WPA2-Ft-PSKWLAN happening or not with Intra roaming. after configuring the OKC to WPA2-Ft- PSK WLAN. EWLCJ175S_Reg_36 Configure and verify To check whether Passed the OKC to roaming happening WPA2-Ft-802.1x or not after WLAN with Inter configuring the roaming. OKC to WPA2-Ft- 802.1 x WLAN. EWLCJ175S_Reg_37 Configure and verify To check whether Passed the OKC to intra roaming WPA2-Ft-802.1x happening or not WLAN with Intra after configuring the roaming. OKC to WPA2-Ft-802.1x WLAN. EWLCJ175S_Reg_38 Configure and verify To check whether Passed the OKC to roaming happening WPA2+WPA3 or not after mixed mode WLAN configuring the with Inter roaming. OKC to WPA2+WPA3 mixed mode WLAN. EWLCJ175S_Reg_39 Configure and verify To check whether Passed the OKC to intra roaming WPA2+WPA3 happening or not mixed mode WLAN after configuring the with Intra roaming. OKC to WPA2+WPA3 mixed mode WLAN.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 129

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

TWT support on Axel AP

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_40 Configuring TWT in To check Whether Passed 9115 Ap 9115 Ap get TWT parameter details properly EWLCJ175S_Reg_41 Configuring TWT in To check Whether Passed 9120 Ap 9120 Ap get TWT parameter details properly EWLCJ175S_Reg_42 Associate 5GHz To verify the 5GHz Passed client to 9115/9120 client associate the Ap with TWT 9115/9120 Ap with configuration. TWT configuration or not EWLCJ175S_Reg_43 Associate 2.4 GHz To verify the 2.4 Passed client to 9115/9120 GHz client associate Ap with TWT the 9115/9120 Ap configuration. with TWT configuration or not EWLCJ175S_Reg_44 Configuring TWT in To verify the 11ax Passed 11ax Ap with ap get TWT flexconnect mode parameter in flexconnect mode EWLCJ175S_Reg_45 Configuring TWTin To verify the 11ax Passed 11ax Ap with Local ap get TWT mode parameter in Local mode EWLCJ175S_Reg_46 Associate the To Verify sleeping Passed sleeping client with client associate with 11ax Ap 11ax Ap properly or not EWLCJ175S_Reg_47 Clear the TWT To verify the client Passed configuration Check behaviour after clea the Client behaviour the TWT configuration

WPA3 Support

Logical ID Title Description Status Defect ID

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 130

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_48 Verifying the WPA3 To verify the WPA3 Passed support with SAE support with SAE Auth key. security Configuration. EWLCJ175S_Reg_49 Verifying the WPA3 To verify the the Passed support with SAE Client packets by security key by connecting the connecting the windows client to windows client. WPA3 and SAE supported SSID EWLCJ175S_Reg_50 Verifying the WPA3 To verify the the Passed support with SAE Client packets by security key by connecting the connecting the Android client to Android client. WPA3 and SAE supported SSID EWLCJ175S_Reg_51 Verifying the WPA3 To verify the the Passed support with SAE Client packets by security key by connecting the Mac connecting the Mac os client to WPA3 os client. and SAEsupported SSID EWLCJ175S_Reg_52 Verifying the WPA3 To verify the the Passed support with SAE Client packets by and PSK security connecting the client key. to WPA3 and SAE and PSK supported SSID EWLCJ175S_Reg_53 Verifying the WPA3 To verify the WPA3 Passed support with SAE Configuration with and 802.1x security SAE and 802.1x key. supported SSID EWLCJ175S_Reg_54 Validating the To verify the WPA3 Passed WPA3 support with support with SAE SAE and Layer 3 and Layer3 Splash Splash page web page web redirect redirect EWLCJ175S_Reg_55 Validating the To verify the WPA3 Passed WPA3 support with support with SAE SAEand Layer 3 On and Layer3 On Mac Mac filter failure. filter failure EWLCJ175S_Reg_56 verifying the WPA3 To verify the WPA3 Passed support with SAE support with SAE and PMF PSK Auth and PMF PSK Auth key. key.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 131

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_57 verifying the WPA3 To verify the WPA3 Passed support with SAE support with SAE and PSK Auth key and PSK Auth key and Layer3 Splash and Layer3 Splash page web redirect. page web redirect. EWLCJ175S_Reg_58 Verifying the WPA3 To verify the WPA3 Passed support with 802.1x support with 802.1x security. security for the different clients. EWLCJ175S_Reg_59 Verifying the WPA3 To verify the WPA3 Passed support with 802.1x support with 802.1x and CCKMsecurity. and CCKM security for the different clients. EWLCJ175S_Reg_60 Verifying the WPA3 To verify the WPA3 Passed support with support with Ft+802.1x security. +Ft_802.1x security for the different clients. EWLCJ175S_Reg_61 Verifying the WPA3 To verify the Intra Passed support with Intra clinet roaming by clinet roaming by using WPA3 support using 9115AP with 9115AP EWLCJ175S_Reg_62 Verifying the WPA3 To verify inter WLC Passed support and SAE Roaming between security with Inter WLANs with WPA3 WLC Roaming support and SAE support EWLCJ175S_Reg_63 Verifying the WPA3 To verify whether Passed support with Client is Moving Roaming between between Controllers Controllers with with Different Radio Differenet Radio type or not with types WPA3 WLAN. EWLCJ175S_Reg_64 Verifying the WPA3 To verify whether Passed support Roaming Client is Moving between Controllers between Controllers with same Radio with same Radio types type or not with WPA3 WLAN. EWLCJ175S_Reg_65 Verifying the WPA3 To verify the WPA3 Passed support with SAE support with SAE Auth key in local security in local auth auth and local and localswitching. switching.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 132

RegressionFeatures- TestSummary Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's

REVIEW DRAFT - CISCO CONFIDENTIAL

Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_66 Verifying the Mesh To check whether Passed configuration. the Mesh configurations are configuring correct or not. EWLCJ175S_Reg_67 Check the Joining of To check the Passed 3800AP in to eWLC Mesh/Bridge with Mesh /Bridge support of 3800 AP Mode after joining in to eWLC EWLCJ175S_Reg_68 Check the Joining of To check the Passed 3800AP in to eWLC Flex+Bridge Mode with Flex+Bridge support of 3800 AP Mode in to eWLC EWLCJ175S_Reg_69 Check the Joining of To check the Passed 4800AP in to eWLC Mesh/Bridge with Mesh/Bridge support of 4800 AP Mode after joining in to eWLC EWLCJ175S_Reg_70 Check the Joining of To check the Passed 4800AP in to eWLC Flex+Bridge Mode with Flex+Bridge support of 4800 AP Mode in to eWLC EWLCJ175S_Reg_71 Verify the Windows To check whether Passed clients connection the windows client for bridge mode is connected or not AP's with WEP to bridge mode AP's security EWLCJ175S_Reg_72 Verify the Android To check whether Passed clients connection the Android client is for bridge mode connected or not to AP's with WEP bridge mode AP's security EWLCJ175S_Reg_73 Verify the IOS To check whether Passed clients connection the IOS client is for bridge mode connected or not to AP's with WEP bridge mode AP's security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 133

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_74 Verify the Windows To check whether Passed clients connection the windows client for Flex+bridge is connected or not mode AP's with to Flex+bridge mode WEP security AP's EWLCJ175S_Reg_75 Verify the Android To check whether Passed clients connection the Android client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WEP security AP's EWLCJ175S_Reg_76 Verify the IOS To check whether Passed clients connection the IOS client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WEP security AP's EWLCJ175S_Reg_77 Verify the Windows To check whether Passed clients connection the windows client for bridge mode is connected or not AP's with to bridge mode AP's WPA2-PSk security with WPA2-PSK security EWLCJ175S_Reg_78 Verify the Android To check whether Passed clients connection the Android client is for bridge mode connected or not to AP's with bridge mode AP's WPA2-PSK security with WPA2-PSK security EWLCJ175S_Reg_79 Verify the IOS To check whether Passed clients connection the IOS client is for bridge mode connected or not to AP's with bridge mode AP's WPA2-PSK security with WPA2-PSK security EWLCJ175S_Reg_80 Verify the Windows To check whether Passed clients connection the windows client for Flex+bridge is connected or not mode AP's with to Flex+bridge mode WPA2-PSK security AP's with WPA2-PSK security EWLCJ175S_Reg_81 Verify the Android To check whether Passed clients connection the Android client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WPA2-PSK security AP's with WPA2-PSK security

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 134

RegressionFeatures- TestSummary Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_82 Verify the IOS To check whether Passed clients connection the IOS client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WPA2-PSK security AP's with WPA2-PSK security EWLCJ175S_Reg_83 Verify the Windows To check whether Passed clients connection the windows client for bridge mode is connected or not AP's with to bridge mode AP's WPA3-SAEsecurity with WPA3-SAE security EWLCJ175S_Reg_84 Verify the Android To check whether Passed clients connection the Android client is for bridge mode connected or not to AP's with bridge mode AP's WPA3-SAEsecurity with WPA3-SAE security EWLCJ175S_Reg_85 Verify the IOS To check whether Passed clients connection the IOS client is for bridge mode connected or not to AP's with bridge mode AP's WPA3-SAEsecurity with WPA3-SAE security EWLCJ175S_Reg_86 Verify the Windows To check whether Passed clients connection the windows client for Flex+bridge is connected or not mode AP's with to Flex+bridge mode WPA3-SAEsecurity AP's with WPA3-SAEsecurity EWLCJ175S_Reg_87 Verify the Android To check whether Passed clients connection the Android client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WPA3-SAEsecurity AP's with WPA3-SAEsecurity EWLCJ175S_Reg_88 Verify the IOS To check whether Passed clients connection the IOS client is for Flex+bridge connected or not to mode AP's with Flex+bridge mode WPA3-SAEsecurity AP's with WPA3-SAEsecurity EWLCJ175S_Reg_89 Check and verify the To check whether Passed AP mode changes AP mode changing by changing From or not frombridgeto bridge mode to local loacl

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 135

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_90 Check and verify the To check whether Passed AP mode changes AP mode changing by changing From or not from Flex+bridge mode Flex+bridge to to Flexconnect. Flexconnect. EWLCJ175S_Reg_91 Check and verify the To check whether Passed intra roaming with intra roaming bridge mode AP happening or not with bridge mode Ap's EWLCJ175S_Reg_92 Check and verify the To check whether Passed intra roaming with intra roaming Flex+bridge mode happening or not AP with Flex+bridge mode Ap's mDNS Support for Wired Guest Ac

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_93 Create the Guest Verify able to create Passed Lan with mDNS the the Guest Lan Mode Bridging with mDNS Mode Gateway and Verify Bridging with Apple with Apple TV TV EWLCJ175S_Reg_94 Create the Guest Verify able to create Passed Lan with mDNS the the Guest Lan Mode Bridging. with mDNS Mode Bridging. EWLCJ175S_Reg_95 Edit the Guest Lan Verify able to edit Passed with mDNS Mode the Guest Lan with Bridging. mDNS Mode Bridging. EWLCJ175S_Reg_96 Delete the Guest Verify able to Passed Lan with mDNS Delete the Guest Mode Bridging. Lan with mDNS Mode Bridging. EWLCJ175S_Reg_97 Create the Guest Verify able to create Passed Lan with mDNS with the Guest Lan Mode Bridging with with mDNS Mode Guest LAN Map Bridging. Configuration.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 136

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_98 Delete the Guest Verify able to Passed Lan with mDNS Delete with the Mode Bridging with Guest Lan with Guest LAN Map mDNS Mode Configuration. Bridging. EWLCJ175S_Reg_99 Create the Guest Verify able to Passed Lan with mDNS Create the Guest Mode Gateway: . Lan with mDNS Mode Bridging Gateway: . EWLCJ175S_Reg_100 Create the Guest verify ableto Create Passed Lan with mDNS the Guest Lan with Mode Bridging mDNS Mode Drop. Drop.

PSK + Multi-authSupport

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_101 Creating Wlan with Verify Wlan Passed WPA2 Security Creating with with MPSK WPA2 Security with MPSK EWLCJ175S_Reg_102 Edit WPA2 Security Verify Wlan Edit Passed PSK Keys on with WPA2 MPSK Security with MPSK EWLCJ175S_Reg_103 Delete WPA2 Verify Wlan Delete Passed Security PSK Keys with WPA2 on MPSK Security with MPSK EWLCJ175S_Reg_104 Creating Wlan with Verify Creating Passed WPA2 Security Wlan with WPA2 with MPSK - Security with Format with Hexa: MPSK - Format with Hexa: EWLCJ175S_Reg_105 Creating Wlan with Verify the Security Passed WPA2 Security Type with Advance with MPSK - Security Password Type : AES :

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 137

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_106 Verify WPA2 Verify WPA2 Passed Security with Security with MPSK Applied in MPSK Applied in Wlan's with Wlan's with Window's Clients Window's Clients with all the 5 Key with all the 5 Key Combinations Combinations EWLCJ175S_Reg_107 Connect the MAC Verify Connect the Passed Clients MAC Clients with all the 5 Key Combinations EWLCJ175S_Reg_108 Connect the Verify Connect the Passed Android Clients Android Clients with all the 5 Key Combinations: EWLCJ175S_Reg_109 Connect the Apple Verify Connect the Passed Mobile Clients with Apple Clients with all the 5 Key all the 5 Key Combinations: Combinations: EWLCJ175S_Reg_110 Connect the Verify Connect the Passed Windows Clients Windows Clients with all the 5 Key with all the 5 Key Combinations: Combinations: EWLCJ175S_Reg_111 MPSK with Ap Verify the Passed Model 9115 Configurations with Ap Different Ap Model 9115 EWLCJ175S_Reg_112 Connect Ap Model Verify the Passed 9120 Configurations with Ap Different Ap Model 9120: EWLCJ175S_Reg_113 Connect Ap Model Verify the Passed 4800 Configurations with Ap Different Ap Model 4800: EWLCJ175S_Reg_114 Connect Ap Model Verify the Passed 3800 Configurations with Ap Different Ap Model 3800 EWLCJ175S_Reg_115 Connect Ap Model Verify the Passed 3700 Configurations with Ap Different Ap Model 3700

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 138

RegressionFeatures- TestSummary Inter Release Controller Mobility

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_116 Connect Ap Model Verify the Passed 1532 Configurations with Ap Different Ap Model 1532:

Inter Release ControllerMobility

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_164 Setting UP the To check whether Passed secure mobility both Control & Data tunnel between path gets UP or not 9800 Controller & between 9800 5520 WLC Controller & 5520 Controller EWLCJ175S_Reg_165 Checking the To check whether Passed mobility groups mobility groups configuration after configurations gets upload/download retained or not after the config file in upload/download 5520 WLC via the config file via TFTP TFTP in 5520 WLC EWLCJ175S_Reg_166 Checking the To check whether Passed mobility groups mobility groups configuration after configurations gets backup/restore the retained or not after config file in 9800 backup/restore the Controllervia TFTP config file via TFTP in Cat 9800 Controller EWLCJ175S_Reg_167 Configuring the To check whether Passed Anchor controller Anchor option can option in a WLAN be configured or not in 5520 WLC UI in a WLAN for WLC's EWLCJ175S_Reg_168 Configuring the To check whether Passed Anchor controller Anchor option can option in 9800 WLC be configured or not UI in a 9800 Controller.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 139

RegressionFeatures- TestSummary Inter Release Controller Mobility

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_169 Performing Inter To check whether Passed Controller roaming Inter Controller of Windows client roaming works between 9800 properly or not for Controller and 5520 Windows clients WLC between 5520 WLC and 9800 Controller with secure mobility tunnel config EWLCJ175S_Reg_170 Performing Inter To check whether Passed Controller roaming Inter Controller of Android client roaming works between 9800 properly or not for Controller and 5520 Android clients WLC between 5520 WLC and 9800 Controller with secure mobility tunnel config EWLCJ175S_Reg_171 Checking Inter To check whether Passed Controller roaming Inter Controller of Mac Os client roaming works between 9800 properly or not for Controller and 5520 Mac os clients WLC between 5520 WLC and 9800 Controller with secure mobility tunnel config EWLCJ175S_Reg_172 Verifying Inter To check whether Passed Controller roaming Inter Controller of different OS roaming works clients between properly or not for 9800 Controller and clients between 5520 WLC with 5520 WLC and WPA2+dot1x 9800 Controller (PEAP) with security type WPA2+dot1x (PEAP) EWLCJ175S_Reg_173 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of properly or not in Windows Client Cat 9800 Controller with L2 during the roaming security-WEP of Windows Client

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 140

RegressionFeatures- TestSummary Inter Release Controller Mobility

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_174 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of properly or not in Android Client with Cat 9800 Controller L2 security-WEP during the roaming of Android Client EWLCJ175S_Reg_175 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of IOS properly or not in Client with L2 Cat 9800 Controller security-WEP during the roaming of IOS Client EWLCJ175S_Reg_176 Checking the To check whether Passed Mobility groups mobility group configuration in configurations gets Active/Standby HA synced or not in WLC Standby WLC during HA EWLCJ175S_Reg_177 Checking the To check whether Passed Mobility groups mobility group configuration in configurations gets Active/Standby HA synced or not in WLC Standby WLC during HA EWLCJ175S_Reg_178 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of properly or not in Windows Client Cat 9800 Controller with L2 during the roaming security-WPA3-SAE of Windows Client with WPA3-SAE security EWLCJ175S_Reg_179 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of properly or not in Android Client with Cat 9800 Controller L2 during the roaming security-WPA3-SAE of Android Client with WPA3-SAE security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 141

RegressionFeatures- TestSummary Inter Release Controller Mobility

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_180 Checking the To check whether Passed Anchor controller Anchor controller functionality during functionality works the roaming of IOS properly or not in Client with L2 Cat 9800 Controller security-WPA3-SAE during the roaming of IOS Client with WPA3-SAE security EWLCJ175S_Reg_181 Checking Inter To check whether Passed Controller roaming Anchor controller of Windows client functionality works between 9800 properly or not in Controller and 3504 Cat 9800 Controller WLC during the roaming of Windows Client with WPA3-SAE security EWLCJ175S_Reg_182 Checking Inter To check whether Passed Controller roaming Anchor controller of Android client functionality works between 9800 properly or not in Controller and 3504 Cat 9800 Controller WLC during the roaming of Android Client with WPA3-SAE security EWLCJ175S_Reg_183 Checking Inter To check whether Passed Controller roaming Anchor controller of IOS client functionality works between 9800 properly or not in Controller and 3504 Cat 9800 Controller WLC during the roaming of IOS Client with WPA3-SAE security EWLCJ175S_Reg_184 Checking Inter To check whether Passed Controller roaming Anchor controller of Windows client functionality works between 9800 properly or not in Controller and 8540 Cat 9800 Controller WLC during the roaming of Windows Client with WPA3-SAE security

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 142

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_185 Checking Inter To check whether Passed Controller roaming Anchor controller of Android client functionality works between 9800 properly or not in Controller and 8540 Cat 9800 Controller WLC during the roaming of Android Client with WPA3-SAE security EWLCJ175S_Reg_186 Checking Inter To check whether Passed Controller roaming Anchor controller of IOS client functionality works between 9800 properly or not in Controller and 8540 Cat 9800 Controller WLC during the roaming of IOS Client with WPA3-SAE security

ISSU Enhancement(Zero downtime for Wireless N/W)

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_187 Performing To check whether Passed Upgradation using the upgradation is ISSU performed or not via ftp EWLCJ175S_Reg_188 Performing To check whether Passed Rollback for the rollback controller using happening for ISSU. Controller image or not. EWLCJ175S_Reg_189 Disabling the To check that the Passed Rollback timer rollbackdoesn't druing upgrading happen for controller using Controller image or ISSU. not. EWLCJ175S_Reg_190 Aborting the To check whether Passed upgradation of the upgradation for Controller using Controller image is ISSU. aborted or not. EWLCJ175S_Reg_191 Performing To check whether Passed Upgradation for the Controller controller using Upgradation via tftp ISSU via tftp server. is happening or not.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 143

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_192 Performing To check whether Passed Upgradation for the Controller Controller using Upgradation via sftp ISSU via sftp is happening or not. server. EWLCJ175S_Reg_193 Performing To check whether Passed Upgradation for the Controller controller using Upgradation via http ISSU via http is happening or not. server. EWLCJ175S_Reg_194 Checking the client To check whether Passed connectivity the client continuously connecting during the upgrade of AP

Syslogs

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_204 Adding syslog To check whether Passed server in eWLCand syslogs are checking the syslog generating in syslog messages in syslog server after adding server in Ewlc EWLCJ175S_Reg_205 Configuring To verify whether Passed multiple syslog syslogs are servers in eWLC generating in syslog and checking the server after adding syslog messages in multiple servers in syslog server Ewlc EWLCJ175S_Reg_206 Downloading the To check whether Passed syslogs after able to dowload the generated in Ewlc syslogs from Ewlc EWLCJ175S_Reg_207 Clearing the logs in To verify whether Passed controller after user able toclear the generated all generated logsin successfully Ewlc EWLCJ175S_Reg_208 Checking the alert To check the alert Passed messages after syslogs in syslog configured syslog server after server level as configured severity "alert" level as alert

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 144

RegressionFeatures- TestSummary

RE V IEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_209 Configuring syslog To verify thecritical Passed servers in eWLC logs in syslog server with log level after configuration setting as critical in device EWLCJ175S_Reg_210 Checking the To check the Passed information information syslogs messages after in syslog server configured syslog after configured server level as severity level as "information" information EWLCJ175S_Reg_211 Checking the To check the Passed debugging messages debugging syslogs after configured in syslog server syslog server level after configured as "debugging" severity level as debugging

CWA (Central Web Authentication)

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_212 Creating a CWA To check Whether Passed along with ACL CWA along with Configuration in ACL Configuration eWLc UI in eWLCUI created or not EWLCJ175S_Reg_213 Associating a To verify whether Passed Japanese Windows Japanese Windows Client to a SSID Client which is which is mapped mapped to ISEis with ISE redirected successfully or not EWLCJ175S_Reg_214 Associating a iOS To verify whether Passed Client to a SSID iOS Client which is which is mapped mapped to ISEis with ISE redirected successfully or not EWLCJ175S_Reg_215 Associating a To verify whether Passed Android Client to a Android Client SSID which is which is mapped to mapped with ISE ISE is redirected successfully or not

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 145

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_216 Associating a MAC To verify whether Passed OS Client to a SSID MAC Client which which is mapped is mapped to ISE is with ISE redirected successfully or not EWLCJ175S_Reg_217 Associating a To verify whether Passed different Clients to client connected to SSID which is ssid redirecting to mapped with ISE Guest portal page and redirecting to with invalid Guest portal page credentials with invalid credentials EWLCJ175S_Reg_218 Associating a To verify whether Passed different Clients to different Clients is a SSID which is redirected mapped with ISE by successfully and creating AVC checking that profile particular application is droped or not EWLCJ175S_Reg_219 Associating a To verify whether Passed different Clients to Clients gets denied a SSID which is when it is connected mapped with ISE by to SSID which is denying the action mapped with ISE in ACL EWLCJ175S_Reg_220 Associating a To verify whether Passed different Clients to Clients gets a SSID which is connected to SSID mapped with ISE by which is mapped permiting the action with ISE by in ACL using TCP permiting the action protocol in ACL using TCP protocol EWLCJ175S_Reg_221 Associating a To verify whether Passed different Clients to Clients gets a SSID which is connected to SSID mapped with ISE by which is mapped permiting the action with ISE by in ACL using UDP permiting the action protocol in ACL using UDP protocol

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 146

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_222 Associating a To verify whether Passed different Clients to Clients gets a SSID which is connected to SSID mapped with ISEby which is mapped permiting theaction with ISE by in ACLusing ICMP permiting the action protocol in ACL using ICMP protocol EWLCJ175S_Reg_223 Checking the To verify whether Passed expired Radius the expried Guest Guest User for user gets proper proper error Error messages message when he logging in EWLCJ175S_Reg_224 Validate whether To verify whether Passed eWLC is switch AAA authentication between configured is occuring when Radius servers one radius server goes down EWLCJ175S_Reg_225 Reboot the To verify whether Passed Controller after Configurations are CWA enabling showing same or different after controller reboot EWLCJ175S_Reg_226 Creating a CWA To verify whether Passed along with ACL ACL rule is created Configuration or not through CLI through CLI EWLCJ175S_Reg_227 Checking the To verify whether Passed configuration of configuration CWA when the user display error is in Read-only message or not when the user is in Read-only EWLCJ175S_Reg_228 Exporting/Importing To verify whether Passed configuration of export and import is CWA done succesfully

CMX Support for EWLC

Logical ID Title Description Status Defect ID

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 147

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_229 Adding Cisco To add a Cisco Passed eWLCto CMX eWLCto CMX and check if the eWLCgets added to the CMX with the eWLCstatus showing EWLCJ175S_Reg_230 Importing maps To import maps Passed from prime from prime infrastructure infrastructure and check if the maps gets imported to the cmx .

EWLCJ175S_Reg_231 Importing the maps To import the maps Passed with Access points from prime infra to from PI to CMX CMX with Access points and check if the access point details are shown correctly including Clients connected . EWLCJ175S_Reg_232 Connecting the To connect a Client Passed Client to the access to the access point point on the floor on the floor and and check if the check if the details details of the Client. of the Clients are shown correctly or not. EWLCJ175S_Reg_233 Connecting many To connect many Passed Clients from Client from different place and different place tothe check the location access points and of the Clients check if thelocation of the Client are shown in CMX EWLCJ175S_Reg_234 Using MAC address To check whether Passed the Client devices Client device can be are searched searched by specifying its MAC address or not EWLCJ175S_Reg_235 Using IP address the To check whether Passed Client devices are Client device can be searched searched by specifying its IP address or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 148

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_236 Using SSID the To verify whether Passed Client devices are Client device can be searched searched by specifying the SSID or not EWLCJ175S_Reg_237 Number of Clients Verifying the Passed visiting the building number of Clients and floor in hourly visiting the building and daily basis or floor on hourly and daily basis EWLCJ175S_Reg_238 Number of Client To check the Passed visits to the building number of new and the floor Clients and repeated Clients to the building or floor .

MC2UC (Videostreaming)

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_239 MC2UC traffic to To verify that the Passed local-switching local-switching client client subscribed to videostreaming receives MC2UC traffic EWLCJ175S_Reg_240 MC2UC traffic to To verify the local Passed local-switching switching client client when receiving MC traffic MC2UC is disabled when MC2UC is disabled at the WLAN EWLCJ175S_Reg_241 MC2UC traffic to To verify the local Passed local-switching switching client client when Media receiving MC traffic streamis removed when Media Stream at AP is disabled at AP EWLCJ175S_Reg_242 Multiple LS clients To verify whether Passed in same vlan, same the multiple wlan, receiving local-sw itc hin g MC2UC traffic clients receives MC2UC traffic when subscribed to videostream

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 149

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_243 Client disassociates To verify whether Passed when receiving AP stops sending MC2UC traffic traffic when client disassociates EWLCJ175S_Reg_244 LS client receiving To verify the Passed MC2UC traffic local-switching roam between client receiving radios at the AP MC2UC traffic roaming between radios of the AP EWLCJ175S_Reg_245 Flex LS client To verify whether Passed receiving MC2UC the LS client traffic when AP receives continuous move from MC2UC traffic connected > SA > when AP moves connected with from connected > same config SA > connected with same config EWLCJ175S_Reg_246 Flex LS client To verify whether Passed receiving MC2UC the LS client traffic when AP receives continuous move from MC2UC traffic connected > SA > when AP moves connected with from connected > different config SA > connected with different config EWLCJ175S_Reg_247 Flex AP reboot in To verify whether Passed connected mode client reassociates when Flex LS client and receives receiving MC2UC MC2UC traffic traffic when flex AP is rebooted in connected mode. EWLCJ175S_Reg_248 Videstream config To verify whether Passed sync for LS WLAN the videostre a ming in HA setup config for LS WLAN has been synced between the Active and Standby in HA setup EWLCJ175S_Reg_249 LS client with To verify whether Passed MC2UC enabled LS client with receiving traffic MC2UC enabled after switchover in receives unicast HA pair traffic after switchover

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 150

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

UL/DL OFDMA Support for 9130

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_250 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for 5Ghz parameters for 5Ghz band. band. EWLCJ175S_Reg_251 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, Channel width, OFDMA & radio OFDMA & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band.

Out of band access to standby

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_252 Configure HA SSO To validate Standby Passed RMI & validate Enviromental Standby Comments Enviromental Comments EWLCJ175S_Reg_253 Configure HA SSO To validate Standby Passed RMI & validate process Comments Standby process Comments EWLCJ175S_Reg_254 Configure HA SSO To validate Standby Passed RMI & validate debugging Standby debugging Comments Comments EWLCJ175S_Reg_255 Configure HA SSO To validate Standby Passed RMI & validate memory Comments Standby memory Comments EWLCJ175S_Reg_256 Configure HA SSO To validate Standby Passed RMI & validate File System Standby File System Comments Comments EWLCJ175S_Reg_257 Configure HA SSO To Configure HA Passed RMI & validate HA SSO RMI RMI parameters.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 151

RegressionFeatures- TestSummary RLAN Support for Fabric and across all modes in IOS-XE

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_258 Verify HA setup To verify HA setup Passed details from details in Standby Standby console console EWLCJ175S_Reg_259 Check interfaces To check interfaces Passed state fromstandby state fromstandby console console EWLCJ175S_Reg_260 Check environment To monitor Passed details fromstandby environment details console from standby console EWLCJ175S_Reg_261 Check process To check process Passed usage details in usage details in standby console standby console

RLAN Support for Fabric and across all modes in IOS-XE

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_262 Configuring RLAN To Configure Passed in eWLC via UI RLAN in eWLC through UI and check if the RLAN is created or not EWLCJ175S_Reg_263 Checking the client To verify whether Passed connectivity to client is connecting RLAN configured to RLAN with open with Open security security and and macfiltering macfiltering EWLCJ175S_Reg_264 Enabling the 802.1x To create a RLAN Passed security and MAC with 802.1x security filtering to RLAN and MAC filtering connecting a windows client to the RLAN and check if the client gets connected to the RLAN port in the AP or not EWLCJ175S_Reg_265 Configuring RLAN To verify whether Passed with open security two wired clients and connect two gets connected with wired clients open security (windows,MAC )

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 152

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_266 Configuring RLAN To verify whether Passed with open+macfilter two wired clients security and connect gets connected with 2 wired clients open+macfilter (windows,MAC ) security EWLCJ175S_Reg_267 Connecting the To verify whether a Passed client to the RLAN windows client configuring with connecting to the 802.1x security and RLAN with 802.1x host mode as single security and host Host mode as single Host EWLCJ175S_Reg_268 Configuring RLAN To verify whether a Passed with 802.1x security client connecting to and host mode as RLAN with 802.1x multi host and security and host connect theclient mode as multi host EWLCJ175S_Reg_269 Configuring RLAN To verify whether a Passed with 802.1xsecurity client connecting to and host mode as RLAN with 802.1x multi domain and security and host connect the client mode as multi domain EWLCJ175S_Reg_270 Checking the client To create a RLAN Passed connectivity to a with 802.1xsecurity RLAN with 802.1x and applying AVC security and profile, connecting mapping a AVC a windows client to profile the RLAN and check if the AVC profile gets applied to the client connecting to it or not. EWLCJ175S_Reg_271 Checking the client To verify whether Passed connectivity with client connecting to 802.1x security and a RLAN with host mode as single 802.1x security and Host and violation host mode as single mode as Replace host along with violation mode as Replace

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 153

RegressionFeatures- TestSummary RLAN Support for Fabric and across all modes in IOS-XE

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_272 Checking the client To verify whether Passed connectivity with client connecting to 802.1x security and a RLAN with host mode as single 802.1x security and Host and violation host mode as single mode as Shutdown host along with violation mode as Shutdown EWLCJ175S_Reg_273 Checking the client To verify whether Passed connectivity with client connecting to 802.1x security and a RLAN with host mode as single 802.1x security and Host and violation host mode as single mode as protect host along with violation mode as Protect

EWLCJ175S_Reg_274 Rebooting the Checking whether Passed eWLC after RLAN connecting the configurations client to RLAN showing same or different after rebooting EWLCJ175S_Reg_275 Downgrading the Checking whether Passed eWLC after RLAN configuring RLAN configurations and connect the showing same or client different after downgradingeWLC and also verifying client connectivity EWLCJ175S_Reg_276 Upgrade the eWLC Checking whether Passed after configuring RLAN RLAN and connect configurations the client showing same or different after upgrading theeWLC and also verifying client connectivity EWLCJ175S_Reg_277 Uploading and To verify whether Passed downloading the RLAN config file and configurations checking the RLAN showing same or configuration different after uploading and downloading file to eWLC and also verifying client connectivity

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 154

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

COS AP Packet Tracer

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_278 Enabling client trace To check if the Passed dump in 3800 COS client trace dump is AP enabled on the 3800 AP and check the behaviour of the AP EWLCJ175S_Reg_279 Enabling client trace To check if the Passed dump in 2800 COS client trace dump is AP enabled on the 2800 AP and check the behaviour of the AP EWLCJ175S_Reg_280 Enabling client trace To check if the Passed dump in 4800 COS client trace dump is AP enabled on the 4800 AP and check the behaviour of the AP EWLCJ175S_Reg_281 Capturing client To capture the client Passed trace dump for the trace dump using client connected 2800 AP for the with Open security client connected with 2800 AP with OPEN security EWLCJ175S_Reg_282 Capturing client To capture the client Passed trace dump for the trace dump using client connected 2800 AP for the with WPA 2 client connected security with 2800 with WPA 2 AP security EWLCJ175S_Reg_283 Capturing client To capture the client Passed trace dump for the trace dump using client connected 2800 AP for the with WPA 3 client connected security with 2800 with WPA 3 AP security EWLCJ175S_Reg_284 Capturing client To capture the client Passed trace dump for the trace dump using client connected 3800 AP for the with Open security client connected with 3800 AP with OPEN security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 155

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_285 Capturing client To capture the client Passed trace dump for the trace dump using client connected 3800 AP for the with WPA 2 client connected security with 3800 with WPA 2 AP security EWLCJ175S_Reg_286 Capturing client To capture the client Passed trace dump for the trace dump using client connected 3800 AP for the with WPA 3 client connected security with 3800 with WPA 3 AP security

EWLCJ175S_Reg_287 Capturing client To capture the client Passed trace dump for the trace dump using client connected 4800 AP for the with Open security client connected with 4800 AP with OPEN security EWLCJ175S_Reg_288 Capturing client To capture the client Passed trace dump for the trace dump using client connected 4800 AP for the with WPA 2 client connected security with 4800 with WPA 2 AP security

EWLCJ175S_Reg_289 Capturing client To capture the client Passed trace dump for the trace dump using client connected 4800 AP for the with WPA 3 client connected

security with 4800 with WPA 3

AP security EWLCJ175S_Reg_290 Analyzing the client To analyze the Passed trace for windows client trace dump client conneted to for the windows COS AP client connected to COS AP EWLCJ175S_Reg_291 Analyzing the client To analyze the Passed trace for Android client trace dump client conneted to for the Android COS AP client connected to COS AP EWLCJ175S_Reg_292 Analyzing the client To analyze the Passed trace for IOS client client trace dump conneted to COS for the IOS client AP connected to COS AP

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 156

RegressionFeatures- TestSummary DL 11ax Mu-MIMO for (VC/SS) AP's

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_293 Analyzing the client To analyze the Passed trace for MAC os client trace dump client conneted to for the MAC os COS AP client connected to COS AP EWLCJ175S_Reg_294 Connecting 4 clients To analyze the Passed to the COS AP and client trace dump analyzing the client for the MAC os trace dump in AP client connected to COS AP EWLCJ175S_Reg_295 Check if the client To check if the Passed trace dump is client trace dump is trigereed when the generated when the AP operating in 2.4 AP is operating in GHz 2.4GHz and client connected to it EWLCJ175S_Reg_296 Check if the client To check if the Passed trace dump is client trace dump is trigereed when the generated when the AP operating in 5 AP is operating in 5 GHz GHz GHz and client connected to it

DL 11ax Mu-MIMO for (VC/SS) AP's

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_297 Configuring 11ax To configue 11ax Passed Access Points, Access Points, Channel width, 11ax Channel width, 11ax MU-MIMO & radio MU-MIMO & radio parameters for 5Ghz parameters for 5Ghz band. band. EWLCJ175S_Reg_298 Configuring 11ax To configure 11ax Passed Access Points, Access Points, Channel width, 11ax Channel width, 11ax MU-MIMO & radio MU-MIMO & radio parameters for parameters for 2.4Ghz band. 2.4Ghz band. EWLCJ175S_Reg_299 Verifying details To verify 11ax Passed with 11ax Android MU-MIMO details client connected. with 11ax Android client connected.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 157

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_300 Verifying details To verify 11ax Passed with 11ax iPhone MU-MIMO details client connected. with 11ax iPhone client connected. EWLCJ175S_Reg_301 Verifying details To verify 11ax Passed with non 11ax MU-MIMO details Windows client with non 11ax connected. Windows client connected. EWLCJ175S_Reg_302 Verifying details To verify 11ax Passed with non 11ax Mac MU-MIMO details client connected. with non 11ax Mac client connected. EWLCJ175S_Reg_303 Verify details by To verify 11ax Passed connecting client to MU-MIMO details 2.4Ghz radio. by connecting client to 2.4Ghz radio. EWLCJ175S_Reg_304 Verify MU-MIMO To verify Passed using different MU-MIMO using models of AP - different models of 9115, 9120, 9130. AP - 9115, 9120, 9130. EWLCJ175S_Reg_305 Check 11ax To check 11ax Passed MU-MIMO support MU-MIMO support for AP configured in for AP configured in Local mode. Local mode. EWLCJ175S_Reg_306 Check 11ax To check 11ax Passed MU-MIMO support MU-MIMO support for AP configured in for AP configured in Flex-connect mode. Flex-connect mode. EWLCJ175S_Reg_307 Check 11ax To check 11ax Passed MU-MIMO support MU-MIMO support for AP configured in for AP configured in Bridge mode. Bridge mode. EWLCJ175S_Reg_308 Check 11ax To check 11ax Passed MU-MIMO support MU-MIMO support for AP configured in for AP configured in Flex+Mesh mode. Flex+Mesh mode. EWLCJ175S_Reg_309 Verify 11ax To verify 11ax Passed MU-MIMO details MU-MIMO details with client with client connecting to connecting to WPA2 - PSK WPA2 - PSK configured WLAN configured WLAN

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 158

RegressionFeatures- TestSummary DL 11ax Mu-MIMO for (VC/SS) AP's

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_310 Verify 11ax To verify 11ax Passed MU-MIMO details MU-MIMO details with client with client connecting to connecting to WPA3 - Dot1x WPA3 - Dot1x configured WLAN configured WLAN EWLCJ175S_Reg_311 Connect upto 8 To connect upto 8 Passed clients and monitor clients and monitor DL/UL 11ax DL/UL 11ax MU-MIMO MU-MIMO statistics statistics EWLCJ175S_Reg_312 Modify spatial To modify spatial Passed streamconfig to 1 streamconfig to 1 streamand monitor streamand monitor 11ax MU-MIMO 11ax MU-MIMO statistics. statistics. EWLCJ175S_Reg_313 Modify spatial To modify spatial Passed streamconfig to 2 streamconfig to 2 streams and monitor streams and monitor 11ax MU-MIMO 11ax MU-MIMO statistics. statistics. EWLCJ175S_Reg_314 Modify spatial To modify spatial Passed streamconfig to 3 streamconfig to 3 streams and monitor streams and monitor 11ax MU-MIMO 11ax MU-MIMO statistics. statistics. EWLCJ175S_Reg_315 Modify spatial To modify spatial Passed streamconfig to 4 streamconfig to 4 streams and monitor streams and monitor 11ax MU-MIMO 11ax MU-MIMO statistics. statistics. EWLCJ175S_Reg_316 Enable videostream To enable Passed and monitor DL/UL videostreamand 11ax MU-MIMO monitor DL/UL statistics 11ax MU-MIMO statistics EWLCJ175S_Reg_317 Modify MCS data To modify MCS Passed rates & monitor data rates & monitor 11ax MU-MIMO 11ax MU-MIMO stats with 11ax stats with 11ax Android client Android client connected. connected. EWLCJ175S_Reg_318 Check 11ax Check 11ax Passed MU-MIMO stats MU-MIMO stats with roaming client with roaming client scenario scenario

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 159

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

Web UI for Golden monitor for Packet drops

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_319 Verify that display To Verify that Passed of CPU allocation display of CPU dashlet is available allocation dashlet is only for 9800-CL available only for virtual platformand same as CLI output EWLCJ175S_Reg_320 Verify that display To Verify that Passed of Datapath display of Datapath utlization utlization information for information for 9800-CL . Virtual EWLC in UI is same as CLI. EWLCJ175S_Reg_321 Verify that display To Verify that Passed of Datapath display of Datapath utlization utlization information for information for 9800-80 9800-80 is same as CLI EWLCJ175S_Reg_322 Verify that display To Verify that Passed of Datapath display of Datapath utlization utlization information for information for 9800-L 9800-L is same as CLI EWLCJ175S_Reg_323 Verify that display To Verify that Passed of Datapath display of Datapath utlization utlization information for information for 9800-40 Gladius is same as CLI EWLCJ175S_Reg_324 Verify that display To Verify that Passed of CPU allocation display of CPU dashlet is not allocation dashlet is available for not available for appliance based appliance based controllers controllers same as CLI EWLCJ175S_Reg_325 Verify that display To Verify that Passed of right unit for tx display of right unit and rx of packets for tx and rx of per port for all packets per port for controller types all controller types same as CLI

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 160

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_326 Verify that display To Verify that Passed of CPU vs Time display of CPU vs graph is shown Time graph is properly in shown properly as Appliance based per CLI in ewlc Appliance based ewlc EWLCJ175S_Reg_327 Verify that display To Verify that Passed of CPU allocation display of CPU during allocation during export/import of export/import of config files for ewlc config files for ewlc 9800-CL 9800-CL EWLCJ175S_Reg_328 Verify that display To Verify that Passed of CPU utilization display of CPU during utilization during backup/restore of backup/restore of config files for config files for appliance based appliance based ewlc ewlc EWLCJ175S_Reg_329 Verify that display To Verify that Passed of CPU allocation display of CPU after performing allocation after upgrade/downgrade performing of ewlc 9800-CL upgrade/downgrade of ewlc 9800-CL EWLCJ175S_Reg_330 Verify that display To Verify that Passed of CPU allocation display of CPU after performing AP allocation after upgrade/downgrade performing AP for ewlc 9800-CL upgrade/downgrade for ewlc 9800-CL EWLCJ175S_Reg_331 Verify that display To Verify that Passed of CPU allocation display of CPU after Performing allocation after Rolling AP upgrade Performing Rolling from PI or DNAC AP upgrade from PI then check the CPU or DNAC then Allocation check the CPU Allocation EWLCJ175S_Reg_332 Verify that display To Verify that Passed of CPU Utilization display of CPU after Enabling all Utilization after the debug Enabling all the commands together debug commands together

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 161

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_333 Verify that display To Verify that Passed of Datapath display of Datapath utlization utlization information for information for eWLC after eWLC after connecting more connecting more than one clients in than one clients in different AP's . different AP's .

WGB Support for C9115 /9105AXI AP

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_334 Configuring the To change the Passed Capwap ap to capwap ap to autonomous AP autonomous ap and check if the AP is converted EWLCJ175S_Reg_335 Configuring the To configure the Passed Autonomous AP as autonomous AP as the WGB WGB and check if the AP changes as WGB. EWLCJ175S_Reg_336 Associating the To associate the Passed WGB on open WGB on open authentication with authentication and 9115 AP check if the WGB associates with the open WLAN ornot. EWLCJ175S_Reg_337 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK with 9115 PSK security with AP 9115 AP and check if the WGB associates with the WLAN or not. EWLCJ175S_Reg_338 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x with 802.1x security 9115 AP when AP in local mode and check if the WGB associates with the WLAN or not.

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 162

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_339 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with PSK PSK security with 9115 AP and check if the WGB associates with the WLAN or not. EWLCJ175S_Reg_340 Associating the To associate the Passed WGB on WPA 3 WGB on WPA 3 with PSK PSK security with 9115 AP and check if the WGB associates with the WLAN or not. EWLCJ175S_Reg_341 Associating the To associate the Passed WGB on WPA 2 WGB on WPA 2 with 802.1x 802.1x security with 9115 and check if the WGB associates with the WLAN or not. EWLCJ175S_Reg_342 Associating the To associate the Passed WGB on WPA 3 WGB on WPA 3 with 802.1x 802.1x security with 9115 and check if the WGB associates with the WLAN or not. EWLCJ175S_Reg_343 Checking of WGB To check the Passed roaming from one roaming of WGB AP to another AP from one AP to another AP and check if the roaming happens succesfully EWLCJ175S_Reg_344 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with OPEN security with OPEN security EWLCJ175S_Reg_345 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 PSK with WPA2 PSK security security

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 163

RegressionFeatures- TestSummary Dynamic Protocol Pack Upgrade - WLC and AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_346 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA2 Dot1x with WPA2 Dot1x security security EWLCJ175S_Reg_347 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA3 PSK with WPA3 PSK security in security in AP bridge mode EWLCJ175S_Reg_348 Performing Inter To check inter Passed controller roaming controller roaming for WGB clients for WGB clients with WPA3 Dot1x with WPA3 Dot1x security in AP security in AP bridge mode bridge mode EWLCJ175S_Reg_349 Associating the To check WGB Passed WGB on open client association security with local with OPEN security authentication and local authentication EWLCJ175S_Reg_350 Checking To verify Passed Reassociation reassociation for happens for WGB WGB clients afte clients after session session timeout timeout EWLCJ175S_Reg_351 Performing local To verify local Passed switching for WGB switching traffic for clients with 9115 client with 9115 AP AP

Dynamic Protocol Pack Upgrade - WLC and AP

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_352 Checking the To check if the Passed Dynamic Protocol Dynamic Protocol Pack Upgrade tab in Pack Upgrade tab in AVC page is AVC page is opening or not opening or not and check if the page is loaded properly

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 164

RegressionFeatures- TestSummary Dynamic Protocol Pack Upgrade - WLC and AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_353 Checking the To check if the Passed Dynamic Protocol Dynamic Protocol Pack Upgrade tab in Pack Upgrade tab in AVC page is AVC page is opening or not with opening or not with dark mode enabled dark mode enabled and check if the page is loaded properly EWLCJ175S_Reg_354 Check the active To check the active Passed protocol pack in the protocol pack in the controller using the controller using the CLI command CLI command and verify the same using UI EWLCJ175S_Reg_355 Adding the protocol To upgrade the Passed pack for eWLC protocol pack for 9800-40 eWLC for 9800-40 EWLCJ175S_Reg_356 Adding the protocol To upgrade the Passed pack for eWLC protocol pack for 9800-80 eWLC for 9800-80 EWLCJ175S_Reg_357 Adding the protocol To upgrade the Passed pack for eWLC protocol pack for 9800-L eWLC for 9800-L EWLCJ175S_Reg_358 Adding the protocol To upgrade the Passed pack for eWLC protocol pack for 9800-CL eWLC for 9800-CL EWLCJ175S_Reg_359 Deleting the To delete the Passed protocol pack upgraded protocol upgraded to eWLC pack from eWLC 9800-40 to check 9800-40 and check if thepack is deleted . EWLCJ175S_Reg_360 Deleting the To delete the Passed protocol pack upgraded protocol upgraded to eWLC pack from eWLC 9800-80 to check 9800-80 and check if thepack is deleted . EWLCJ175S_Reg_361 Deleting the To delete the Passed protocol pack upgraded protocol upgraded to eWLC pack from eWLC 9800-L to check 9800-CL and check if thepack is deleted .

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 165

RegressionFeatures- TestSummary Dynamic Protocol Pack Upgrade - WLC and AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_362 Deleting the To delete the Passed protocol pack upgraded protocol upgraded to eWLC pack from eWLC 9800-CL to check 9800-CL and check if the pack is deleted . EWLCJ175S_Reg_363 Check if the To check if the Passed upgrade of protocol upgrade of the pack happens in protocol pack eWLC 9800-40 happens if thespace when the memory of is less in the bootflash is very bootflash of the less eWLC 9800-40 device EWLCJ175S_Reg_364 Check if the To check if the Passed upgrade of protocol upgrade of the pack happens in protocol pack eWLC 9800-40 happens if thespace when the memory o is less in the bootflash is very bootflash of the less eWLC 9800-40 device EWLCJ175S_Reg_365 Check if the To check if the Passed upgrade of protocol upgrade of the pack happens in protocol pack eWLC 9800-40 happens if thespace when the memory o is less in the bootflash is very bootflash of the less eWLC 9800-40 device EWLCJ175S_Reg_366 Check if the To check if the Passed upgrade of protocol upgrade of the pack happens in protocol pack eWLC 9800-40 happens if thespace when the memory of is less in the bootflash is very bootflash of the less eWLC 9800-40 device EWLCJ175S_Reg_367 Upgrading the To upgarde the Passed protocol pack and protocol pack and also upgrading the eWLC 9800-40 and eWLC 9800-40 to check iftheprotocol watch the protocol pack if same befor pack and after upgrading

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 166

RegressionFeatures- TestSummary Dynamic Protocol Pack Upgrade - WLC and AP

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_368 Downgrading the To downgrade the Passed eWLC 9800-40 eWLC 9800-40 after upgrading the after upgrading the protocol pack protocol pack and check the version of the protocol pack after downgrade EWLCJ175S_Reg_369 Upgrading the To upgarde the Passed protocol pack and protocol pack and also upgrading the eWLC 9800-80 and eWLC 9800-80 to chec k iftheprotocol watch the protocol pack if same befor pack and after upgrading EWLCJ175S_Reg_370 Downgrading the To downgrade the Passed eWLC 9800-80 eWLC 9800-80 after upgrading the after upgrading the protocol pack protocol pack and check the version of the protocol pack after downgrade EWLCJ175S_Reg_371 Upgrading the To upgarde the Passed protocol pack and protocol pack and also upgrading the eWLC 9800-CLand eWLC 9800-CL to check iftheprotocol watch the protocol pack if same befor pack and after upgrading EWLCJ175S_Reg_372 Downgrading the To downgrade the Passed eWLC 9800-CL eWLC 9800-CL after upgrading the after upgrading the protocol pack protocol pack and check the version of the protocol pack after downgrade EWLCJ175S_Reg_373 Upgrading the To upgarde the Passed protocol pack and protocol pack and also upgrading the eWLC 9800-L and eWLC 9800-L to check iftheprotocol watch the protocol pack if same befor pack and after upgrading EWLCJ175S_Reg_374 Downgrading the To downgrade the Passed eWLC 9800-L after eWLC 9800-L after upgrading the upgrading the protocol pack protocol pack and check the version of the protocol pack after downgrade

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 167

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

HA SSO RMI

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_375 Configure HA setup To configure HA Passed using RP option. setup using RP option. EWLCJ175S_Reg_376 Validate the HA To validate the HA Passed setup parameters. setup parameters. EWLCJ175S_Reg_377 Unpairing HA setup To unpair the HA Passed using no setup using no RP-Method RP-Method EWLCJ175S_Reg_378 Configure HA SSO To Configure HA Passed RMI SSO RMI EWLCJ175S_Reg_379 Validate the HA To validate the HA Passed RMI parameters. RMI parameters. EWLCJ175S_Reg_380 Update RMI To update RMI Passed configuration in configuration in eWLCUI and check eWLC UI and check the output the output EWLCJ175S_Reg_381 Enable gatway To enable gatway Passed failover, verify failover, verify output details and output details & monitor devices for monitor devices for switchover. switchover. EWLCJ175S_Reg_382 Force-switchover to To verify HA SSO Passed verify HA SSO RMI RMI behaviour on behaviour. force-switchover. EWLCJ175S_Reg_383 Enabling the RP To enable the RP Passed method with RMI method with RMI enabled already. option enabled already. EWLCJ175S_Reg_384 ISSU upgrade with To peform ISSU Passed HA SSO RMI upgrade in HA SSO RMI setup and monitor behaviour EWLCJ175S_Reg_385 Check ISSU To peform ISSU Passed downgrade with HA upgrade in HA SSO SSO RMI RMI setup and monitor behaviour EWLCJ175S_Reg_386 Client retention To verify client Passed during ISSU retention after ISSU upgrade/downgrade upgrade/downgrade

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 168

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_387 Force multiple To force multiple Passed switchover after switchover after upgrade to check if upgrade to check if RMI link is up or RMI link is up or not not EWLCJ175S_Reg_388 Force multiple To force multiple Passed switchover and switchover and verify AP & client verify AP & client association association EWLCJ175S_Reg_389 Validate licensing To validate Passed information after licensing ISSU information after upgrade/downgrade ISSU upgrade/downgrade EWLCJ175S_Reg_390 Validate licensing To validate Passed information after licensing multiple switchover information after and reload multiple switchover and reload EWLCJ175S_Reg_391 Clear RMI based To clear RMI based Passed configuration from configuration from UI UI EWLCJ175S_Reg_392 Clear RMI based To clear RMI based Passed configuration from configuration from CLI CLI EWLCJ175S_Reg_393 Configure HA SSO To configure HA Passed RMI after RP-clear SSO RMI after & validate HA RMI RP-clear & validate parameters. HA RMI parameters. EWLCJ175S_Reg_394 Verify HA setup To verify HA setup Passed details from details in Standby Standby console console EWLCJ175S_Reg_395 Check interfaces To check interfaces Passed state fromstandby state fromstandby console console EWLCJ175S_Reg_396 Check environment To monitor Passed details fromstandby environment details console from standby console EWLCJ175S_Reg_397 Check process To check process Passed usage details in usage details in standby console standby console

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 169

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_398 Monitor running To monitor running Passed process in Standby process in Standby unit from Active unit from Active unit console unit console EWLCJ175S_Reg_399 SSH to standby To SSH to standby Passed console directly and console directly and check connectivity check connectivity

Best Practices WebUI

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_412 Enable/Disable the Verify the web UIis Passed http/https for able to open or not management through http/https after modification EWLCJ175S_Reg_413 Configure the NTP To check whether Failed CSCvw49202 server NTP server is able to configure or not for WEB UI EWLCJ175S_Reg_414 Configure theClient To check whether Passed Exclusion Client Exclusion policies[fix button Policies is enabled is not available need or not to check in latest build] EWLCJ175S_Reg_415 Create the WLAN Verify the WLAN Passed with WPA2 with WPA2 after configuring via best practice EWLCJ175S_Reg_416 Enable the User Checking the User Passed Login Policies Login Policies is enabled or not EWLCJ175S_Reg_417 Enable the Local Verify the enabled Passed Profiling on one or Local Profile on more active Active WLAN WLANs EWLCJ175S_Reg_418 Configure the client To check whether Passed band for all Active client Band is WLANs applied or not for Active WLANs EWLCJ175S_Reg_419 Enable the 5ghz Verify the 5ghz Passed band for Active client band on active WLAN WLANs

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 170

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_420 Enable the 2.4ghz Checking the 2.4ghz Passed band for Active client band onactive WLAN WLANs EWLCJ175S_Reg_421 Configure the Best To check whether Passed channel width Best channel width is configured or not on both radios EWLCJ175S_Reg_422 Enable the Flexible To check whether Passed Radio Assignment Flexible Radio Assignment is enabled or not EWLCJ175S_Reg_423 Configure the Load Verify the Load Passed balance for one or balance enabled or more active WLAN not on Active WLAN EWLCJ175S_Reg_424 Enable the Auto To check whether Failed CSCvx02818 Dynamic Channel global channel is Assignment enabled or not

Open dns

Logical ID Title Description Status Defect ID EWLCJ175S_Reg_425 verifying ewc To Verify whether Passed registered with open the ewc registered in DNS server open DNS and ewc got the device ID or not EWLCJ175S_Reg_426 Verifying the To Verify whether Passed created profile the profile mapped mapped with ewc with ewc and GUI and CLI refleted in ewc GUI & CLI or not EWLCJ175S_Reg_427 Verifying the To verify whether Passed WLAN created with the WLAN created open DNS with open DNS configuration configuration or not EWLCJ175S_Reg_428 Verifying the open To Verify whether Passed DNS configuration the open DNS for the connected configured or not Windows Client in when Windows JOS ewc UI/CLI connected to Umbrella enabled WLAN Profile

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 171

RegressionFeatures- TestSummary

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_Reg_429 Verifying the open To Verify whether Passed DNS configuration the open DNS for the connected configured or not MAC OS Client in when MAC OS ewc UI/CLI connected to Umbrella enabled WLAN Profile EWLCJ175S_Reg_430 Verifying the open To Verify whether Passed DNS configuration the open DNS for the connected configured or not iOS Client in ewc when iOS client UI/CLI connected to Umbrella enabled WLAN Profile EWLCJ175S_Reg_431 Verifying the open To Verify whether Passed DNS configuration the open DNS for the connected configured or not Android Client in when Android client ewc UI/CLI connected to Umbrella enabled WLAN Profile EWLCJ175S_Reg_432 clear the data plane To verify whether Passed stats in open DNS the data plate stats configuration is cleared or not EWLCJ175S_Reg_433 Perform the To verify the open Passed roaming between DNs configuration 9115 & 9120 Aps after client roaming between 9115 & 9120 Aps EWLCJ175S_Reg_434 Perform the To verify the open Passed roaming between dns after Inter two ewc roaming

Config Wireless

Logical ID Title Description Status Defect ID EWLCJ175S_config_1 Username is predefined in To verify the username is Failed CSCvw29392 eWLC after upgrading to 17.5 predefined or not after upgrading 17.5 EWLCJ175S_config_2 IOSD & Init Memory Leak To check the memory leak in Failed CSCvw76287 observed in c9800-40 eWLC c9800-40 eWLC EWCJ175S_config_3 Password is visible for user To check whether the Password Failed CSCvw39897 accounts in Edge Browser is visible or not in edge browser

EWCJ175S_config_7 9800 Ap: debug al crashed To verify al the crash files Failed CSCvw60007 multiple crash files with crash loop eg, nginx_pman

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 172

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

SR Cases

Logical ID Title Description Status Defect ID EWLCJ175S_SR_01 Check smart To check smart Passed licensing in 9800 licensing in HA setup. setup. EWLCJ175S_SR_02 Check smart To check smart Passed licensing in HA licensing in HA setup. setup. EWLCJ175S_SR_03 Check license info To check license Passed after multiple reload info after multiple in HA setup. reload in HA setup. EWLCJ175S_SR_04 Check license info To check license Passed after multiple info after multiple switchover in HA switchover in HA setup. setup. EWLCJ175S_SR_05 Check license info To check license Passed after upgrading to info after upgrading latest build in HA to latest build in HA setup. setup. EWLCJ175S_SR_06 Check license info To check license Passed after downgrading info after to older build in HA downgrading to setup. older build in HA setup. EWLCJ175S_SR_07 Check interface To check interface Passed status on multiple status on multiple switchover in HA switchover in HA setup setup EWLCJ175S_SR_08 Check interface To check interface Passed status on multiple status on multiple reload in HA setup reload in HA setup EWLCJ175S_SR_09 Verify client To verify client Passed connectivity on connectivity on channel channel addition/deletion for addition/deletionfor 11ax protocol 11ax protocol EWLCJ175S_SR_10 Verify client To verify client Passed connectivity on connectivity on channel channel addition/deletion for addition/deletionfor 5Ghz 11ac protocol 11ac protocol

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 173

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_11 Verify client To verify client Passed connectivity on connectivity on channel channel addition/deletion for addition/deletion for 11n protocol 11n protocol EWLCJ175S_SR_12 Enable & configure To enable & Passed SNMP server on configure SNMP eWLC server on eWLC EWLCJ175S_SR_13 Enable & configure To enable & Passed SNMP server on configure SNMP eWC server on eWC EWLCJ175S_SR_14 Enable & configure To enable & Passed SNMP server on configure SNMP Japanese locale server on Japanese locale EWLCJ175S_SR_15 Configure Configure Passed non-broadcasted non-broadcasted SSID SSID and check beacon frames are sent properly EWLCJ175S_SR_16 Configure Configure Passed non-broadcasted non-broadcasted SSID SSID and check beacon frames are sent properly EWLCJ175S_SR_17 Configure Configure Passed non-broadcasted non-broadcasted SSID SSID and check beacon frames are sent properly EWLCJ175S_SR_18 Configure Configure Passed non-broadcasted non-broadcasted SSID SSID and check beacon frames are sent properly EWLCJ175S_SR_19 Verify the nvram To verify the nvram Passed configuration after configuration after reload reload EWLCJ175S_SR_20 Verify the version To check the boot Passed of the Boot loader loader version is image displayed correctly or not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 174

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _S R_21 Verify the contents To verify the Passed of the Address contents of the Resolution Protocol Address Resolution (ARP) table Protocol (ARP) table in CAT9K switch or not EWLCJ175S _S R_22 Verify upgradation To verify if the Passed of Controller using Controller device’s FTP software is upgraded with the latest build EWLCJ175S _S R_23 Verify Upgradation To verify if the Passed of Controller using Controller device’s TFTP software is upgraded with the latest build EWLCJ175S _S R_24 Downgrading To verify if the Passed Controller Software Controller device’s using FTP software is downgraded with the chosen build EWLCJ175S _S R_25 Downgrading To verify if the Passed Controller Software Controller device’s using TFTP software is downgraded with the chosen build EWLCJ175S _S R_26 Upgrade Software To verify the Passed by providing a upgradation of the wrong file format in software update by Controller device. provide wrong file format. EWLCJ175S _S R_27 Verify the To verify if the Passed Upgradation of Controller device’s Controller Software software is upgraded without cleaning up with the latest build the disks EWLCJ175S _S R_28 Verify the To verify the Passed Upgradation of upgradation of Controller software Controller Software by interrupting the by interrupting the installation and installation and reinitiating the reinitiating the process process EWLCJ175S _S R_29 Verify Hundred Gig To verify Hundred Passed bit interface status Gig bit interface in Orthrus device status in Orthrus device

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 175

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_30 Verify Hundred Gig to verify Hundred Passed bit interface status Gig bit interface by giving status by giving shutdow n/no shutdown/no shutdown shutdown commands comma nds EWLCJ175S_SR_31 Verify Hundred Gig To verify Hundred Passed bit Mac-link status Gig bit Mac-link in Orthrus device status in Orthrus device EWLCJ175S_SR_32 Verify interface To verify interface Passed swap status in swap status in Orthrus device Orthrus device EWLCJ175S_SR_33 Verify interface To verify interface Passed status by giving status by giving shutdown/no shutdow n/no shutdown shutdown commands after commands after swapping in Orthrus swapping interface device in Orthrus device EWLCJ175S_SR_34 Verify the To verify the Passed temperature status temperature status of Controller device of Controller device in CLI in CLI EWLCJ175S_SR_35 Verify the To verify whether Passed temperature the temperature summary of a summary of Controller Controller is displayed correctly or not EWLCJ175S_SR_36 Verify the To verify the Passed temperature status temperature status of AP through of AP through Controller CLI Controller CLI EWLCJ175S_SR_37 Verify the To verify the Passed temperature status temperature status of AP through of AP through Console and Console and compare with compare with controller CLI controller CLI EWLCJ175S_SR_38 Verify the To verify the Passed temperature status temperature status of different Aps of different Aps through Console and through Console and Controller CLI Controller CLI

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 176

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _S R_39 Verify the power To verify the power Passed outage and recovery outage and recovery of a Controller of a Controller device device EWLCJ175S _S R_40 Verify the CPU To verify if the CPU Passed Usage of Controller Usage of the device Controller device is displayed correctly EWLCJ175S _S R_41 Check the Digital To verify whether Passed Optical Monitoring DOM can show the in the optical Optical Rx and Tx interfaces levels is: EWLCJ175S _S R_42 Verify whether able To verify whether Passed to enable Radar able to enable Radar channels from 1 to channels from 1 to 14 for 2.4 Ghz and 14 for 2.4 Ghz and 5Ghz for new RF 5Ghz for new RF Profile Profile EWLCJ175S _S R_43 Verify whether able To verify whether Passed to enable different able to enable Radar Channels for different Radar Pre configured Channels for Pre client density 5Ghz configured client density 5Ghz EWLCJ175S _S R_44 Verify whether able To verify whether Passed to enable different able to enable Radar Channels for different Radar Pre configured Channels for Pre client density configured client 2.4Ghz density 2.4Ghz EWLCJ175S _S R_45 Verify whether able To verify whether Passed to configure Radar able to configure Channels for the Radar Channels for following the following 120,124,128 and 120,124,128 and 144 144 EWLCJ175S _S R_46 Verify client To verify client Passed connectivity using connectivity using different Radar different Radar Channels with Band Channels with Band 5GHZ band 5GHZ band EWLCJ175S _S R_47 Verify client To verify client Passed connectivity using connectivity using different Radar different Radar Channels with Band Channels with Band 2.4GHZ band 2.4GHZ band

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 177

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_48 Configure DHCP To Configure DHCP Passed and verify ip and verify ip address assigned to address assigned to clients clients EWLCJ175S_SR_49 Configure DHCP To Configure DHCP Passed with reduced lease with reduced lease time time EWLCJ175S_SR_50 Configure DHCP To Configure DHCP Passed for specific client for specific client mac address mac address EWLCJ175S_SR_51 Configure with a ip To Configure with a Passed server and hostname ip server and server with domain hostname server name lookup with domain name enabled lookup enabled EWLCJ175S_SR_52 Configure with a ip To Configure with a Passed server and two ip server and two hostname server hostname server EWLCJ175S_SR_53 Configure with a ip To Configure with a Passed server and NTP ip server and with address NTP IP address EWLCJ175S_SR_54 Configure with two To Configure with Passed NTP servers with two dns one stratumlebvel set hostname and one ip EWLCJ175S_SR_55 Bootup AP and To bootup and Passed capture logs verify any umwanted messages aredisplayedin logs EWLCJ175S_SR_56 send wrong config To verify device Passed using netconf status after sending wrong config using netconf EWLCJ175S_SR_57 Verify no Frequent To Verify no Passed channel change on Frequent channel XOR radio change on XOR operating on 5GHz radio operating on band 5GHz band EWLCJ175S_SR_58 Verify no Frequent To Verify no Passed channel change on Frequent channel Slot 1 radio when change on Slot 1 XOR Radio is also radio when XOR operating on 5GHz Radio is also band operating on 5GHz band

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 178

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _S R_59 Verify no Frequent Verify no Frequent Passed channel change on channel change on XOR radio XOR radio operating on 5GHz operating on 5GHz band when AP band when AP mapped to mapped to custom-rf-profile custom-rf-profile EWLCJ175S _S R_60 [EWC-SIT] GUI: On the EWC GUI, Passed Neighbors's page is the Neighbor’s page blank is blank. This page is not applicable to EWC and needs to be removed. EWLCJ175S _S R_61 [EWC-SIT] GUI: On the EWLC GUI, Passed Neighbors's page is the Neighbor’s page blank is blank. This page is not applicable to EWC and needs to be removed. EWLCJ175S _S R_62 [EWC-SIT] GUI: On the EWLC GUI, Passed Neighbors's page is the Neighbor’s page blank is blank. This page is not applicable to EWC and needs to be removed. EWLCJ175S _S R_63 C9800 GUI: Unable When an AP is Passed to load All Access downloading AP Point entry while image from C9800 APimagedownload and then we change entry size by searching from AP name (trigger1.png) or selecting items per page (trigger2.png), Even if reload the page again from web browser, the issue is not resolved.

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 179

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_64 C9800 GUI: Unable When an AP is Passed to load All Access downloading AP Point entry while image from C9800 APimagedownload and then we change entry size by searching from AP name (trigger1.png) or selecting items per page (trigger2.png), Even if reload the page again from web browser, the issue is not resolved. EWLCJ175S_SR_65 C9800 GUI: Unable When an AP is Passed to load All Access downloading AP Point entry while image from C9800 APimagedownload and then we change entry size by searching from AP name (trigger1.png) or selecting items per page (trigger2.png), Even if reload the page again from web browser, the issue is not resolved. EWLCJ175S_SR_66 Client goes into With WPS "client Passed 'Exclusionlist' even Exclusion Policy" if the "Client Disabled & WLAN Exclusion is Policy - Client Disabled" Exclusion Disabled, if the client fails authentication multiple times, it gets moved to "Client Exclusionlist" for the "client exclusion" period available on WLAN policy profile. EWLCJ175S_SR_67 Client goes into With "Enabliing Passed 'Exclusionlist' even client exclusion in if the "Client best practices in Exclusion is EWLC" Disabled"

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 180

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _S R_68 Client goes into With WPS "client Passed 'Exclusionlist' even Exclusion Policy" if the "Client Disabled & WLAN Exclusion is Policy - Client Disabled" Exclusion Disabled, if the client fails authentication multiple times, it gets moved to "Client Exclusionlist" for the "client exclusion" period available on WLAN policy profile. EWLCJ175S _S R_69 Connecting a 11ax To connect a 11ax Passed AP with domain as AP with IN domain IN to eWLC and and check the check the beacon beacon frames to frames validate the details in the beacon frames using wireshark EWLCJ175S _S R_70 Connecting a 11ax To connect a 11ax Passed AP with domain as AP with US domain US to eWLC and and check the check the beacon beacon frames to frames validate the details in the beacon frames using wireshark EWLCJ175S _S R_71 Connecting a 4800 To connect a 4800 Passed AP with domain as AP with US domain US to eWLC and and check the check the beacon beacon frames to frames validate the details in the beacon frames using wireshark EWLCJ175S _S R_72 Connecting a 3800 To connect a 3800 Passed AP with domain as AP with IN domain IN to eWLC and and check the check the beacon beacon frames to frames validate the details in the beacon frames using wireshark

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 181

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_73 Try disabling 11n To try disabling 11n Passed radio when the 11ax radio when 11ax radio is enabled . radio is enabled and check the behaviour of the radio after reloading EWLCJ175S_SR_74 Try disabling 11ac To try disabling Passed radio when the 11ax 11ac radio when radio is enabled . 11ax radio is enabled and check the behaviour of the radio after reloading EWLCJ175S_SR_75 check if the To check if the Passed configuration is configuration is persistent across persistent across reload disabling reload disabling 11ac and 11n 11ac and 11n EWLCJ175S_SR_76 Connecting a latest To connect a latest Passed version Android version android client with WPA 3 client to 9120 AP PSK security with the WLAN security as WPA PSK EWLCJ175S_SR_77 Connecting a latest To connect a latest Passed version Android version android client with WPA 3 client to 9120 AP 802.1x security with the WLAN security as WPA 3 EWLCJ175S_SR_78 Connecting a latest To connect a latest Passed version Android version android client with WPA 3 client to 3800 AP PSK security with the WLAN security as WPA PSK EWLCJ175S_SR_79 Connecting a latest To connect a latest Passed version Android version android client with WPA 3 client to 3800 AP 802.1x security with the WLAN security as WPA 3 EWLCJ175S_SR_80 Configuring To configure Passed different Syslog different syslog facility for 9115 facility for 9115 AP 11ax AP in eWLC in eWLC AP join and checking the profile and same in the APs validating the same in the AP

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 182

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S _S R_81 Configuring To configure Passed different Syslog different syslog facility for 9120 facility for 9120 AP 11ax AP in eWLC in eWLC AP join and checking the profile and same in the APs validating the same in the AP EWLCJ175S _S R_82 Configuring To configure Passed different Syslog different syslog facility for 1810 AP facility for 1810 AP in eWLC and in eWLC AP join checking the same profile and in the APs validating the same in the AP EWLCJ175S _S R_83 Checking the Time To check whether Passed zones name for the time zones can be COS AP in eWLC modified for the COS AP's EWLCJ175S _S R_84 Checking the Time To check whether Failed CSCvw67337 zones name for the time zones can be COS AP in eWLC modified for the after reload COS AP's after reload EWLCJ175S _S R_85 Checking the ARP To check ARP entry Passed issue with Windows issue with Win 10 10 client client EWLCJ175S _S R_86 Checking the ARP To check ARP entry Passed issue with mobile issue with mobile client client EWLCJ175S _S R_87 Checking the ARP To check ARP entry Passed issue with different issue with different AP models AP models EWLCJ175S _S R_88 Checking the ARP To check ARP entry Passed issue with different issue with different security method security method configured configured EWLCJ175S _S R_89 RF-Profile Max To check the Passed Client test in local RF-profile max mode with client test in local custom-rf-profile mode EWLCJ175S _S R_90 RF-Profile Max To check the Passed Client test in Flex RF-profile max mode with client test in flex custom-rf-profile mode

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 183

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_91 Reduce max-clients To check the client Passed count when more connectivity after clients are reducing max client connected to AP count EWLCJ175S_SR_92 Checking the To check the Passed payload values after payload values after changing the RF changing the RF profiles profiles EWLCJ175S_SR_93 Checking the To check the Passed payload values after payload values after changing AP changing the AP Radio(2.4/5 Ghz) radio(2.4/5 Ghz) EWLCJ175S_SR_94 Verifying the client To verify the client Passed deletion status deletion status EWLCJ175S_SR_95 Enable the channel To verify the Passed for IN regulatory Channels able to doamin enable or not foe the IN regulatry domain EWLCJ175S_SR_96 Enable the channel To verify the Passed for J4 regulatory Channels able to doamin enable or not foe the J4 regulatry domain EWLCJ175S_SR_97 Enable the channel To verify the Passed for J4 regulatory Channels able to doamin via CLI enable or not foe the IN regulatry domain EWLCJ175S_SR_98 Joining the 4800 ap To verify the ap join Passed to the controller to the contorller or latest image not EWLCJ175S_SR_99 Joining the 3800 To verify the ap join Passed /2800 ap to the to the contorller or controller latest not image EWLCJ175S_SR_100 Joining the 9130 ap To verify the ap join Passed to the controller to the contorller or latest image not EWLCJ175S_SR_101 Joining the 9115 ap To verify the ap join Passed to the controller to the contorller or latest image not EWLCJ175S_SR_102 Joining the 9120 ap To verify the ap join Passed to the controller to the contorller or latest image not

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 184

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_103 Associate the client To check whether Passed to open security the client associated type formdot1x or not EWLCJ175S_SR_104 Associate the client To check whether Passed to PSK+Mac filter the client associated security type form or not dot1x EWLCJ175S_SR_105 Associate the client To check whether Passed to PSK security type the client associated form dot1x or not EWLCJ175S_SR_106 Configuring TWT To verify the TWT Passed 9130 ap with altest configuration image suppoeted or not EWLCJ175S_SR_107 Configuring TWT To verify the TWT Passed 9115 ap with altest configuration image suppoeted or not EWLCJ175S_SR_108 Configuring TWT To verify the TWT Passed 9120 ap with altest configuration image suppoeted or not EWLCJ175S_SR_109 Verify the Crash in To Verify the Crash Passed ewc in ewc EWLCJ175S_SR_110 Verify the Crash in To Verify the Crash Passed ewlc in ewlc EWLCJ175S_SR_111 Verifying the To verify the client Passed Android client connection status Connection based in 2.4 and 5 G statusbased in 2.4 radio. and 5 G radio. EWLCJ175S_SR_112 Verifying the MAC To verify the client Passed client Connection connection status statusbased in 2.4 based in 2.4 and 5 G and 5 G radio. radio. EWLCJ175S_SR_113 Verifying the To verify the client Passed Windows client connection status Connection based in 2.4 and 5 G statusbased in 2.4 radio. and 5 G radio. EWLCJ175S_SR_114 Verify the Ap To Verify the Ap Passed upgrade in 9115 upgrade in 9115 EWLCJ175S_SR_115 Verify the Ap To Verify the Ap Passed upgrade in 9120 upgrade in 9120 EWLCJ175S_SR_116 Verify the Ap To Verify the Ap Passed upgrade in 9130 upgrade in 9130

TestResults Summary forCatalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 185

RegressionFeatures- TestSummary SRCa se s

REVIEW DRAFT - CISCO CONFIDENTIAL

EWLCJ175S_SR_117 verify the channels To verify the Passed in 2.4 and 5 G in channels in 2.4 and 9115 5 G in 9115 EWLCJ175S_SR_118 verify the channels To verify the Passed in 2.4 and 5 G in channels in 2.4 and 9120 5 G in 9120 EWLCJ175S_SR_119 verify the channels To verify the Passed in 2.4 and 5 G in channels in 2.4 and 9130 5 G in 9130

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 186

C H A P T E R 5

Related Documentation

• Related Documentation, on page 187

Related Documentation

CME 8.10 Rlease Notes https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html

WLC 8.10 Configuration Guide https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810.html

CMX 10.6 Configuration Guide https://www .cisco.com/c/en/us/td/docs/wireless/mse/10-6/cmx_config/b_cg_cmx106/getting_starte d_with_ cisco_cmx.html

PI 3.8 User Guide https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure-3-8/model.html

ISE 3.0 Release Notes https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/release_notes/b_ise_30_rn.html

Cisco Catalyst 9800 Series Wireless Controller Softwar e Configuration Guide https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-4/config-guide/b_wl_17_4_cg.html

Cisco Catalyst 9800 Series Wireless Controller 17.4 Configur ation Guide https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-4/config-guide/b_wl_17_4_cg.html

Cisco Catalyst 9800 Series Wireless Controller 17.4 Release Notes https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-4/release-notes/rn-17-4-9800.html

Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.5 for Japan (R elease Version 17.5 ) 187

Related Documentation Related Documentation REVIEW DRAFT - CISCO CONFIDENTIAL

Release Notes for Cisco Digital Network Architecture Spaces https://www.cisco.com/c/en/us/td/docs/wireless/cisco-dna-spaces/release-notes/cisco-dnaspaces-dec20.html

Release Notes Cisco Digital Networ k Architectu re Center https://www .cisco.com/c/en/us/td/docs/cloud -systems-mana gement/netw ork-automation-and-mana gement/ dna- center/2- 1-2/release_notes/b_cisco_dna_center_rn_2_1_2.html

Cisco Catalyst 9600 Series Switches 17.4 Release Notes https://www .cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/softw are/rele ase/17-4/release_notes/ ol- 17-4- 9600.html

TestResults Summary for Catalyst 9800 Series Wireless Controllerand EWC 17.5 for Japan (Release Version 17.5 ) 188