MATERIALS SCIENCE and ENGINEERING T D a T S M R a D

MATERIALS SCIENCE AND ENGINEERING t d a t s m r a D

U T

r e n n i B

n i r t a K

: o t o h P

24-26 Aug 2010 Darmstadt, Germany ww w.mse-congress.de MSE 2010 Programme Overview

A1 A2 A3 A4 A5 A03 A04 lecture-room ground- ground- ground- ground- ground- basement basement floor floor floor floor floor

Tue 9:45 A1: MSE Opening, Prof. Kaysser 24 Aug 10:40 - 14:00 Hans Eckart Exner-Memorial, Building S3/20 9:55-10:35 A1: 1. Plenary, Jürgen Rödel, (TU Darmstadt, D) 10:40-12:20 D3 C2 E3 F5 A2 B6 C1

12:20-13:45 lunch break 13:45-14:25 A1: 2. Plenary, Helena Van Swygenhoven-Moens;(PSI, CH) 14:30-16:10 D3 C2 E3 F5 A3 B6 C1 16:10-16:40 coffee break 16:40-18:20 D3 C2 E3 F5 A4 B6 C1

19:00-23:00 MSE-Party, Opening Prof. Quandt, MSE-CongressChair Wed 8:30-10:10 D3 D2 E2 F1 B2 B6 C1

25 Aug 10:10-10:40 coffee break 10:40-12:20 D3 D2 E2 F1 B2 B6 C1

12:20-13:45 lunch break 13:45-14:25 A1: 3. Plenary, Franz Faupel (University of Kiel, D) 14:30-16:10 D3 D2 E2 F1 B1 B4 C3

16:10-16:40 coffee break 16:40-18:20 D3 D2 E2 F1 B1 B4 C3

18:20-21:00 Poster Evening with snacks and beer A1: Announcement of the Poster Prize Winners Thu 8:30-9:10 4. Plenary, Gerhard Dehm (Erich-Schmid-Institute, A) B3 D1 C4 F3 B5 B1 C3 26. Aug 9:15-10:55 10:55-11:20 coffee break 11:20-13:00 B3 D1 C4 F3 B5 B1 C3

13:00-14:00 lunch break 14:00-15:40 B6 D1 C4 F3 B5 B1 C3

15:45-16:25 A1: 5. Plenary, Matthias Wuttig (RWTH Aachen University, D) 16:25-16:35 A1: Closing Address, Professor Heilmaier, TU Darmstadt

The Technical Programme and its Organisers

A: Functional Materials B: Structural Materials C: Processing E. Quandt, Christian-Albrechts- C. Leyens, Technische Universität R. Riedel, Technische Universität University of Kiel Dresden Darmstadt

A2 Intelligent Materials B1 Intermetallic Aluminides: C1 Nanomaterials and H. Fritze, Technical University of Physical Metallurgy and Composites Clausthal, Goslar (Germany); Processing K.-H. Haas, Fraunhofer-Institut für A. Hütten, University of Bielefeld F. Appel, M. Oehring, J. D.H. Silicatforschung, Würzburg (Germany) Paul, GKSS Forschungszentrum (Germany); R. Gadow, F. Kern, A3 Mesoporous Geesthacht GmbH (Germany) University of Stuttgart (Germany) M. Biener, Lawrence Livermore B2 Modern Steels C2 Coatings National Laboratory (USA); H. Biermann, P.R. Scheller, J. Vetter, Sulzer Metaplas, Bergisch H. Peterlik, University of Vienna Technische Universität Freiberg Gladbach (Germany); R. Pitonak, (Austria); J. Schneider, Technische (Germany) Boehlerit GmbH & Co.KG, Universität Darmstadt; J. Biener, A. B3 Refractory Materials Kapfenberg (Austria) Hamza, Lawrence Livermore C. Aneziris, Technische Universität C3 Joining National Laboratory, USA Freiberg (Germany); P. Quirmbach, C. Sommitsch, Graz University of A4 Polymer Nanocomposites Deutsches Institut für Feuerfest und Technology (Austria); U. Reisgen, H. Münstedt, University of Keramik, Bonn (Germany) RWTH Aachen University, Juelich Erlangen-Nürnberg (Germany); B4 Functional Amorphous (Germany) F. Faupel, Christian-Albrechts- Materials and Glasses C4 FAST Processing and Rapid University of Kiel (Germany) L. Wondraczek, University of Manufacturing Erlangen-Nürnberg (Germany) J. Stampfl, Technische Universität B5 New Methods in Materials Vienna (Austria); B. Baufeld, Design Katholieke Universiteit Leuven W. Bleck, RWTH Aachen (Ger ma - (Belgium); J. R. Groza, University of ny); H.-J. Hoffmann, Technische California, Berkeley (USA); M. Universität Berlin (Germany) Farsari, Foundation for Research B6 Mechanical Properties and and Technology-Hellas (FO.R.T.H.), Microstructure Heraklion (Greece); P. Greil, H.-J. Christ, University of Siegen University of Erlangen-Nürnberg (Germany); M. Heilmaier, (Germany) Technische Universität Darmstadt (Germany) K M F A o ( T ( D ( H P V t J A p K E V b D W F n R G E C D D V Z A e . G G G e . r r a y P n r i i

f o u e ö a h . . . 3 2 1 u r e e :

l l

e c O o o )

R F l l e i . r f e e e n

A o l i a P m i i ; i i a a W F n e

h y s L g g r . p C b b r

t r r r a l H r i l b , r e

, r g l

n s j

A m m m b b t e e e f o e e

u a

C N M a K h ( d z J t r o e i e i o L G L o h , o r . n n r m r r s i a a a e c , , a h e i a

i a t r

d g g i e t i a f c

l c z t d s U

n n n B c i f d e a y r

u T G e ( ( w e

e h e e n c r c h , b C S r B y y y n e s l r ( ( n t s r

r v e r e a h s l

h o t G G - m s o ) ) )

w e e a n a G e c U p i , i M a H ; ;

l u T e t s v s

c r r r o e h

r n c a o U e e e , n B a l i n n e t m r l K H W G ) , t t

n t r i o c r n - ; c n o r r z i ,

n n e u r P t e T S v

u m m i a

h e . i s h o P ( y e m e l s

n y i r J

o G P e . J

r S i c v , .

n a f ) . c n r i u r a a

t c z d (

a ü n r i b t y s ( e

e l - U N

h u n i S s a U e N h F u s a n n M e a r

u A q

s r H i e l

o d K n r w a o r n y y s l t

s n e l t M u l m y e e

e i U S a i i

r a

) ) a d ) f i t u t s S o U ; i

s ; e

( u - r v ä t a c i p , i n

G ) c

B n o a c m U z e c n e h s ;

o n D t J h s n h r i h

. e s e t H h r a

r l v a ü i e e t , e

C M n m y . e p s u v o a r r e

e R u f

r e r n l i r l ) e

n u U a i

f m a l i t H .

r ; r r e s ü t n U n l y a

e r

n s g (

m c , n n M e n G s n H

a , o i f l r g n s e t i ü i o d i , r

c h y e n l t v z i é

, a e

l I ä r f ) v h o

a n e

I y n L

e C

; b r n t ( e t B i e M

D l s ) n r m

U e n v t s e ; U s r e t u z n e d r e

i t a s t i K a r a r t i n n - D i t . r i u t r - t u y r a l t ) , u

- t

- d

- i ä e t ; e . m n , l t s , t r ,

- U ( E H E U n W D F E K E G . v 3 2 y : .

a n n .

) H o

e e i i ; r A M E v v m

l r r o u e e k H m l m b N M f s o s t r r f . i a t m s s e t m a o u o J d a i i . , n t t e d c n f

a y ä

t e y f e S l T r t

t n t e ) i e e l

a B r e ; c n l a F i c

c n i o i h a , I r f t h n h . e

e , d c i l

n n

o S s g i r h S

R b i

t i n t P k u , s i t P W e e f

, c h , m t r T

u r i h a o M e n g B

T n e s c c ( b

r H g G i

e e e ( h c a G U

m s n r e I c A T n s o n i e r r h e s i s a i m s a n r c v , n t m t c

i e n g h a r

t R h u ( u a r e s n G u s t e i c

n y i h t n f t t i e y ) ä ü r u o ) r r t r n m e s a

- K F S F T G I ( ( S C N - o - E o - L " K F ( N F A E

L n G G G I a . 1 3 5 n n r a : B V c c f f . . .

s . l

r ü o

R t a g S h i

e e e t n D e I E L e D R e B i r O d t Z . i i t n c i r r r d t n n x f e g I l

u n n i m m m . e i e l o

h g n c b B I B z B e e K

z t o c r e - n

l e J g a e f a a a e i i s e o r w l O e a f e S l e T t o o m f - e ä i ü l h n t n n n U r r e c

b l h r n x e c g - m a a e r x N c a s a - y y y r c I z e

d N n i e d a , z n n

n n f h e ) ) ) K n m a a e

i ; ; ; l ( a t

e c k , v , e t s n , G S d ü A

o c M - l t

c ,

e l e l p I S N n c e r U l o e

c U . T

T l s B e e n e l r

. T e i f r U . r a s o i n c s o r n . s - n i B e n b e

n r i o H s o i J a z t i a i m n F

i r i . z t n c i e

u e d e v . c v y s , m i

i t . l c

t h n r r a t

r v e - c

i e S i

y g

i K g o a U A l i n i e J Y U a h r n r u u h m

e t e s e

s n i t o r u n f u y l p s n i i a n n i ( s i s o r l r o e

t , t G l t ) n i l d p t i i

t y e o a t y v e

r , t c v t n i S g y

U i

r e l g r e e c l

i T ,

o M o y

i , e c r o n

y r e f d r s

o s s f f f m

s F a

c e i e t a f H i v

N r e o t B

o t h a y , i r G e y x i B E e m f a r o t

n n

e -

r e s r a P d o e m s C ( n o s l d y t m U a l i w y r f " r a s ) l t a i b h

m o y r n K c e n o e i m u

g g h n n ) a c o u r r i - e a k g n k t e f h n - ; s -

Photographs Courtesy Fraunhofe r- Gesellschaft Programme

24-26 Aug 2010 Darmstadt, Germany ww w.mse-congress.de

2 MSE Experts Committee 3 General Information 4 Hans Eckart Exner-Memorial 5 MSE Side Events 7 Plenary Lectures 10 Symposium Organisers 14 Lecture Programme 34 Poster Programme 47 List of Authors MSE Experts Committee

MSE will build a forum on which the Topic A: Topic E: multilateral parties can meet to Functional Materials Modelling exchange ideas and to organise societal activities. Prof. Dr. Eckhard Prof. Dr. Karsten Albe Quandt Technische Universität Do not miss this exellent occasion to Christian-Albrechts- Darmstadt communicate with the interesting University of Kiel community to discover its directions, priorities and opportunities. The new MSE will create an atmosphere in which young talents get the opportunity to mix with professors and industries. Topic F: The programme is chaired by the MSE- Topic B: Biomat Expert Committee. Structural Materials Prof. Dr. Klaus D. Jandt Prof. Dr. Christoph Friedrich-Schiller- Leyens University Jena Technische Universität Dresden

Dr. Thomas F. Keller Friedrich-Schiller- University Jena Topic C: Processing

Prof. Dr. Ralf Riedel Technische Universität Darmstadt

Topic D: Characterisation Congress Office MSE

Prof. Dr. Anke Kaysser- Deutsche Gesellschaft Pyzalla für Materialkunde e.V. Helmholtz-Zentrum Anja Mangold, Yvonne Koall, Berlin für Materia lien Ute Riedel und Energie, Berlin Senckenberganlage 10 60325 Frankfurt P: +49-(0)69-75306 747 [email protected] www.mse-congress.de

2 General Information

List of Participants Coffee Breaks Conference Fees All participants are listed on the website: Coffee will be served for free during the University: www.mse-congress.de coffee breaks. Additional beverages, 605 EUR (550 EUR for DGM members) The list of participants will remain online sandwiches and fruits may be purchased Industry: after the congress. separately. 786 EUR (715 EUR for DGM members) Student **/ PhD-Student: 181 EUR (165 EUR DGM members) Lecture Presentation and Discussion Lunch Times Lunch is not included in the conference Fees for the attendance of the Technical - Plenary: 40 minutes fee. There are several opportunities in the Programme are free of VAT. (without discussion) refectory and in the city centre nearby. Surcharge of 10% for late registration - Keynote: 40 minutes has been included in the above registrati - (incl. 10 minutes of discussion) on fees since 01 August 2010. - Highlight Lecture and Lectures: MSE Party 20 minutes The MSE party takes place on Tuesday at (incl. 3 minutes of discussion) 19:00 h. Participation is included in the Conference Venue - Oral Poster: 3 minutes conference fee. Accompanying persons or MSE 2010 (discussion in front of the poster) Side Events participants may purchase TU Darmstadt, karo5, Karolinen -platz 5, tickets at a price of 25 EUR. 64289 Darmstadt MSE Side Events Programm Details: Welcome Hotel, Karolinenplatz 4, 5 Plenary Lectures Poster Evening 64289 Darmstadt 10 Keynote Lectures Wednesday, 18:45 - 21:00 h, Foyer, 8 Highlight Lectures Karo5 290 Lectures The poster evening on Wednesday will Parking 76 Oral Posters give poster authors the opportunity to be There is a car park at the Welcome Hotel 210 Posters available in front of their poster in order that can be used at 10 EUR per day. to discuss their subject and respond to questions. Snacks and beverages will be Publications offered. Delegates start meeting the aut - There might be number of journals who hors at their posters after the lecture pro - will publish a selection of papers after the gramme. congress based on particular Topics or Symposia. If a paper is among those that have been chosen for publication, the edi - Poster Award tor will get in touch with the author direct - The best 3 posters will be awarded a ly. Therefore, we kindly ask authors not to poster prize that consists of a voucher send any manuscripts without being from the publishing house Wiley-VCH. addressed. The winners will be identified by a jury. The Prizes will be announced on Thursday at 8:30 h in Lecture Hall A1(before the Poster Mounting/Dismantling Times Plenary Lecture). Posters remain on display during the whole congress. Mountig Times: Mon, 23 Aug: 18:00 - 19:00 h Tue, 24 Aug: 8:00 - 10:00 Dismantling Time: Thu, 26.8.: from 16:30 h

3 Hans Eckart Exner-Memorial Tuesday, 24 August

Hans Eckart Exner-Memorial Programme: 12:10 h „Progress in Sinter Technology and Influence of Microstructural Features on Quantitative Image Analysis of the Electrical Conductivity of CuCr Alloys Microstructures“ 10:40 h K. von Klinski-Wetzel, Laudatio Hans Eckart Exner M. Heilmaier, C. Hans Eckart Exner, G. Petzow, Max- Kowanda, F.E.H. Professor at the Planck-Institut für Müller, TU Darmstadt Technische Universität Metallforschung, (Germany) Darmstadt, Germany, Stuttgart (Germany) passed away in October 2009. 12:25 h A special session will be held on selected Simulation und Quantitative Analyse von lectures given by his former students, col - 11:00 h Gefügen mit irregulären Eutektika leagues and companions. 3D-Gefügeanalyse in der Mikro- Nano- M. Rettenmayr, und atomaren Skala Friedrich Schiller Venue: F. Mücklich, Saarland University Jena; O. Rundeturmstraße 10 University, Saar - Pompe, B. Dutta, TU Buidling S3/20 brücken (Germany) Darmstadt (Germany)

12:45 h Reaktionssintern 11:20 h N. Claussen, Freiburg Pulvermetallurgische Produkte und Ferti - (Germany) gungsverfahren im Bereich "Green Energy" L. Sigl, Plansee SE, Reutte (Austria)

13:05 h Lunch in the Foyer of the Lecture Hall organised by the Institue of Physical 11:40 h Metallurgy. Modeling of Sintering: Challenges and Further Development E. Olevsky, San Diego State University (USA)

11:55 h On the Use of Sintercladding as a Novel Process for Iron-Base Wear Resistant Coatings S. Weber, Helmholtz- Zentrum-Berlin für Materialien und Energie GmbH, Berlin (Germany)

4 MSE Side Events Tuesday, 24 August Tuesday, 24 August Wednesday , 25 August

SE1: Wege zur Promotion in Material - SE5: Neue Chancen für Materialwissen - SE4: Innovationspotenzial ausgewählter wissenschaft und Werkstoff technik schaft und Werkstofftechnik im Europä - neuer Werkstoffe Dienstag, 24. August 2010, 14:45 h - ischen Forschungsraum? 08:30 Uhr - 16:30 Uhr, Welcome Hotel 17:45 h, Welcome Hotel Darmstadt 14:45 -18:20 Uhr, Welcome Hotel - in German - Zielsetzungen In dem Symposium mit Workshop- Vorstellung der Ausbildungskonzepte von • Visionen entwickeln (Forschungs- Charakter werden die beiden folgenden Graduiertenkollegs und SFBs mit integrier - strategien, Konzepte, …) Werkstoffthemen in zwei aufeinanderfol - tem Graduiertenkolleg im Fachgebiet • Information, bestehende Möglichkeiten genden Sessions behandelt: Materialwissenschaft und darstellen und gegenseitig austauschen Werkstofftechnik: • Bedarf an Themen, Maßnahmen, - Metallische Gläser (Vormittags-Session) Förderung abfragen, der klar auf den • Prof. Dr. Göken, Uni. Erlangen-Nürnberg Mehrwert europäischer Zusammenarbeit - Funktionelle Oxide für die Elektronik • Prof. Dr. Grathwohl, Uni. Bremen abhebt. (Nachmittags-Session) • Prof. Dr. Quandt, Uni. Kiel • Wie lässt sich dieser Bedarf aus deut- • Dr. Geigenmüller, TU Bergakademie scher Sicht stärker in Europa vertreten? Beide Themen betreffen innovative Freiberg Materialien, die sich dadurch auszeich - • Prof. Dr. Wanner, KIT Häufig erscheint der Europäische For - nen, dass sie sich (noch) im Stadium inten - schungs raum abstrakt und schwer durch - siver materialwissenschaftlicher Forschung Pause 15 min schaubar. Diese gemeinsam von acatech befinden, aber bereits ein großes und DFG ausgerichtete Sitzung möchte Potenzial hinsichtlich ihrer Anwendung in • Dr. Schmidtmann, DFG, Promotion in den Europäischen Forschungsraum besser gesellschaftlich und wirtschaftlich relevan - strukturierten Programmen aus Sicht der greifbar machen und setzt dazu an ge - ten Bereichen erkennen lassen. DFG gen wärtigen Herausforderungen im • V. Lohel, Promotion in den Ingenieur - Bereich der Materialwissenschaft und Ziel ist es, für diese beiden wissenschaften, Ergebnisse einer ACA - Werkstofftechnik in Deutschland an. Werkstoffthemen den aktuellen nationalen TECH-Studie und internationalen Stand der Forschung • N.N., Anforderungen an promovierte Vertreter aus Wissenschaft, Wirtschaft und und Entwicklung abzustecken, Ingenieure aus Sicht der Industrie, Administration werden anhand konkreter Innovationspotenziale für verschiedene Vertreter der Fa. Heraeus Beispiele folgende Fragen diskutieren: Anwendungsbereiche aufzuzeigen und • Prof. Dr. M. Heilmaier, TU Darmstadt, • Welche neuen Möglichkeiten können in den weiteren Forschungs- und Promotion aus Sicht einer TU einem Europäischen Forschungsraum Entwicklungsbedarf herauszuarbeiten. entstehen? Dazu werden verschiedene Podiumsdiskussion (30 min) • Gibt es schon Beispiele guter Praxis? Fragestellungen, die sich zum einen auf • Welche Themen und Fördermaßnahmen technologische Aspekte und zum anderen sind jetzt und in Zukunft relevant? auf anwendungsspezifische Probleme kon - zentrieren, systematisch bearbeitet. In der Ansprechpartner: abschließenden Diskussionsrunde sollen Prof. Dr. ‐Ing. Christina Berger, Technische die adressierten Anwendungen und die Universität Darmstadt / acatech erforderlichen Entwicklungsschritte in einer (berger@mpa ‐ifw.tu ‐darmstadt.de) Roadmap zeitlich eingeordnet werden. Dr. Marc ‐Denis Weitze, acatech Geschäftsstelle Das Symposium richtet sich sowohl an ([email protected]) F&E-Gruppen aus Instituten und Dr. ‐Ing. Burkhard Jahnen, Deutsche Unternehmen, die an den betreffenden Forschungsgemeinschaft Werkstoffen arbeiten, als auch an potenti - ([email protected]) elle industrielle Anwender in der Dr. ‐Ing. Xenia Molodava, Deutsche Wertschöpfungskette. Der intensive Dialog Forschungsgemeinschaft der Teilnehmer soll dazu beitragen, den ([email protected]) Innovations- und Umsetzungsprozess bei den betreffenden Werkstoffen zu unterstüt - zen.

Die beiden Themen werden getrennt von - einander in einer Vormittags- und einer Nachmittagssession bearbeitet. Nach einem einführenden Übersichtsvortrag folgt die erste offene Diskussionsrunde, in der

5 MSE Side Events Tuesday, 24 August Wednesday, 25 August Wednesday, 25 August

die zentralen technologischen SE3: Innovation, Technologietransfer und SE6: Unsichtbar, aber unverzichtbar: Herausforderungen von den Teilnehmern Gesellschaft Wie steigern wir die Wahrnehmung von identifiziert und durch Punktevergabe 09:00 Uhr - 17:00 Uhr, Welcome Hotel Materialwissenschaft und bewertet werden sollen. In den daran Werkstofftechnik in der Öffentlichkeit? anschließenden fünf Modulen werden zen - Dieses Symposium soll Barrieren und 14:45-18:20h, Welcome Hotel trale Fragen zu einzelnen Technologie- Chancen des Technologietransfers aus der und Anwendungsfeldern zunächst durch Wissenschaft in die Industrie diskutieren Sie sind die Grundlage etlicher bahnbre - einen ca. 5-minütigen Impulsvortrag eines und neue Erkenntnisse aus der gegenwär - chender Erfindungen, sie besitzen ein eingeladenen Teilnehmers eingeleitet und tigen Innovationsmanagement- und kaum zu überschätzendes wirtschaftliches dann im Plenum diskutiert. Gründungsforschung aufzeigen, die die Potenzial – und doch stehen sie im Effizienz und Effektivität des Transfers ver - Schatten der öffentlichen Wahrnehmung: Ansprechpartner: bessern können -- aus Sicht von Forschung Werkstoffe gelten in der Außenwahr - Dr. Oliver Krauss und Industrie! Denn unter dem Begriff nehmung als spröde. Nun klagen auch ([email protected]) "Open Innovation" wird in jüngster Zeit andere Disziplinen darüber, dass ihre Dr. Ralf Fellenberg eine intensive Diskussion über die Bedeutung in der Öffentlichkeit nicht aus - ([email protected]) Einbeziehung externer Akteure in den reichend gewürdigt wird. Dr.-Ing. Gunther Hasse unternehmerischen Innovationsprozess Die geringe Wahrnehmung der ([email protected]) geführt. Die Integration fremden Wissens Werkstoffe gefährdet inzwischen die (z.B. von Kunden, Zulieferern, Universi - führende Position Deutschlands auf diesem täten, etc.) ist ein wettbewerbsentschei - Gebiet: der Nachwuchs bleibt aus. Daher dender Faktor zu erfolgreicheren Produk - hat acatech, die Deutsche Akademie der ten angesehen. Zugleich weisen neue Technikwissenschaften, einen Ausbau der Formen der Abstimmung mit Beitragenden Information und Kommunikation für jenseits der Grenzen des Unternehmens Werkstoffe auf allen Ebenen von neue und höchst effektive Wege der unter - Wissenschaft und Wirtschaft gefordert. nehmerischen Wertschöpfung. Wie soll dies konkret bewerkstelligt wer - Mit besonderem Fokus auf Kleine- und den? Was kann hier jeder einzelne tun? Mittelständige Unternehmen, mit traditio - nell geringen F&E Budgets werden auf Ansprechpartner diesem Symposium, Erfahrungsberichte Prof. Dr.-Ing. Christina Berger, Technische und Erkenntnisse aus aktuellen Universität Darmstadt / acatech Forschungsprojekten im Anwendungsfeld (berger@mpa ‐ifw.tu ‐darmstadt.de) der Materialwissenschaften vorgestellt. Dr. Marc-Denis Weitze, acatech Darüber hinaus sollen Vorträge zur Geschäftsstelle Gründungsforschung, der Finanzierung ([email protected]) von Ausgründungen sowie aus der Open- Dr.-Ing. Pedro Dolabella Portella, BAM / Innovation-Praxis Einblicke in die BV MatWerk Potentiale des Technologie- bzw. des ([email protected]) Erkenntnistransfers in den Materialwissenschaften gewähren.

Prof. Dr. D. Hilgers, Universität Hamburg ([email protected]) Prof. Dr. F. Piller, RWTH Aachen ([email protected]) Prof. Dr. M. Weissenberger-Eibl ([email protected]) Dipl.-Kfm. K. Joachim, Universität Kassel und FhG-ISI-Karlsruhe ([email protected])

6 Plenary Lectures

Technische Universität Darmstadt Karo5, Lecture Room A1

Tue New lead-free ferroelectrics: Piezoceramics, electrostrictors, high-temperature dielectrics 9:55 J. Rödel, Technische Universität Darmstadt (Germany) Chair: W. Kaysser, GKSS Research Centre, Geesthacht

Lead-containing ceramics are ubiquitous in all areas of piezoelectric applications due to their superior properties. One of the major concerns in the development of new piezoelectrics therefore is the elimination of toxic lead. Since Bi3+, the only non-toxic heavy metal, has the same electronic structure as Pb2+, it is no surprise that Bi-based solid soluti - ons with perovskite structure have been intensively investigated. The aim is to find a morphotropic phase boundary similar to that found in the lead zirconate titanate phase diagram. In this presentation, we will review the current status of materials development and discuss opportunities still available in the search for new compositions. In particular, ferroelectric and piezoelectric properties of systems based on Bi1/2Na1/2TiO3 (BNT) will be presented. Particular focus is put on the influence of crystal structure changes as func - tion of temperature and electric field. Select examples of temperature-dependent ferroelasticity and blocking force will also be given. Some materials are shown to display an electrostrictive strain higher than that of any lead-based elec - trostrictor. Finally, some of the compositions are very attractive as high-temperature dielectrics due to their consistently high permittivity up to more than 300°C, very little temperature dependence in permittivity and low dielectric losses.

Born in 1958, Jürgen Rödel studied Materials Sciences in Erlangen and Ceramics in Leeds before getting his PhD from UC California at Berkeley in 1988. In 1992, he obtained his habilitation from TU Hamburg-Harburg and is a professor in the Department of Materials- and Geosciences of TU Darmstadt since 1994, specializing on the mechanical and elec - trical properties of functional ceramics. In 1998 and 2004 he was a Visiting Professor at the University of Washington/Seattle (USA) and Leeds (UK), respectively. Since 2003, he is the speaker of the Collaborative Research Center 595 ‘Electrical Fatigue in Functional Materials’. In 2009, he received the Leibniz-Award of the German Science Foundation, the highest scientific award in Germany.

Tue Micromechanics and Microstructures: X-rays, Neutrons and Computation 13:45 H. Van Swygenhoven-Moens, Paul Scherrer Institut, Villigen (Switzerland) Chair: C. Leyens, Technische Universität Dresden

The microstructure of today’s metals is steadily increasing its complexity because of the increasing demands on perfor - mance. Classical characterization and mechanical testing techniques can not provide all necessary input parameters for adapting predictive engineering models to such complex microstructures. Advances in X-ray/neutron technologies have resulted in increased beam intensities, improved detector efficiencies and sub-micron focusing techniques. In-situ mechanical testing during X-ray and neutron diffraction is now an excellent research method to provide synergies with computational modeling, addressing issues such as elastic and plastic anisotropy, load-sharing and phase transforming mechanisms, degradation phenomena and enhanced strengthening mechanism observed in spatially confined volumes.

Prof. Dr. Helena Van Swygenhoven-Moens heads the Materials Science and Simulation group (MSS) at the Paul Scherrer Institute and is an adjunct Professor in the Institute of Materials (IMX) of the Ecole Polytechnique Fédérale de Lausanne (EPFL). MSS aims to develop synergies between computational material science and state-of-the-art in-situ mechanical testing during X-ray and neutron diffraction allowing the study of the evolution of microstructures of structural materials during deformation. More information on MSS can be found on http://mss.web.psi.ch/

7 Plenary Lectures

Technische Universität Darmstadt Karo5, Lecture Room A1

Wed Metal-Polymer Nanocomposites for Functional Applications 13:45 F. Faupel, Christian-Albrechts-Universität zu Kiel (Germany) Chair: E. Quandt, Christian-Albrechts-University of Kiel

Nanocomposites combine favorable features of the constituents on the nanoscale to obtain new functionalities. The present talk is concerned with the preparation of polymer-based nanocomposites consisting of metal nanoparticles in a polymer matrix and the resulting functional properties. Emphasis is placed on vapor phase deposition which inter alia allows the incorporation of alloy clusters with well defined composition and tailored filling factor profiles. Examples presented include optical composites with tuned particle surface plasmon resonances for plasmonic applications, magnetic high frequency materials with cut-off frequencies well above 1 GHz, sensors that are based on the dramatic change in the electronic properties near the percolation threshold, and antibacterial coatings which benefit from the large effective surface of nanoparticles and the increased chemical potential which both strongly enhance ion release.

Franz Faupel was born in Fritzlar, Germany, in 1957. He received his diploma and Ph.D. in physics from the University of Göttingen in 1982 and 1985, respectively, working on diffusion and defects in metals and alloys. Subsequently he investigated related subjects until in 1987 he joined the IBM Th. J. Watson Research Center in Yorktown Heights, New York, as a postdoctoral fellow studying mechanical properties of metal-polymer structures, as well as diffusion and solid-state reactions in thin films. In 1988 he returned to the University of Göttingen, where his research focused on diffusion in amorphous media, formation of metal-polymer interfaces, and thermodynamics, particularly of high-tempe - rature superconductors. Since 1994 Faupel is full professor and holds the Chair for Multicomponent Materials within the Faculty of Materials Science and Engineering at the University of Kiel, where he is also faculty member in the Physics Department. Since 2005 Faupel is coordinator of the North German Initiative on Nanomaterials (NINa). Faupel is Principal Editor of the Journal of Materials Research and was previously Associate Editor in Europe of the journal. He served on the editorial boards of Applied Physics Letters, the Journal of Applied Physics, and Journal of Adhesion Science and Technology and is member of the editorial advisory board of Defect and Diffusion Forum. His activities also include work on other national and international advisory and evaluation boards. From 2008 to 2010 he was Dean of the Faculty of Materials Science and Engineering.

Thu Small and Strong: Materials at their Mechanical Limit 08:30 G. Dehm, Montanuniversität Leoben (Austria) Chair: R. Riedel, Technische Universität Darmstadt

The continuous trend in miniaturization of materials for reliable applications in sensors, actuators as well as microelec - tronic and medical devices requires a fundamental understanding of the mechanical properties in the micro- and nano - meter regime. Novel approaches were developed in the last years to probe the mechanical properties at such small dimensions and to unravel the underling deformation mechanisms with the ultimate aim of developing quantitative material laws for miniaturized materials. In this overview new insights in the deformation mechanisms of (sub)micron-sized fcc metals obtained by using tensi - on and compression tests in combination with electron microscopy observations, µLaue diffraction studies, and discrete dislocation dynamics simulations are reported. Furthermore, recent results on the damage evolution and fracture beha - viour of thin film structures are presented. Benefits and challenges encountered in small scale mechanical testing will be discussed.

Prof. Dr. Gerhard Dehm is Head of the Department Materials Physics of the Montanuniversität Leoben (Austria) and Director of the Erich Schmid Institute of Materials Science of the Austrian Academy of Sciences. He studied Materials Science (Erlangen) and received his PhD degree in 1995 (Stuttgart). He was a visiting scientist at the Technion in Haifa with an Alexander von Humboldt / F eodor Lynen scholarship and subsequently a senior scientist at the MPI for Metals Research, Stuttgart. His field of research includes mechanical size-effects in thin films and nanostructured mate - rials, interface related phenomena in materials and in-situ electron microscopy. He has received several awards, inclu - ding the Masing Memorial Award from the DGM and the Award for Nanosciences of Styria. His publication list contains more than 180 scientific publications, including contributions to books and more than 65 invited lectures.

8 Plenary Lectures

Technische Universität Darmstadt Karo5, Lecture Room A1

Thu Phase Change Materials: from Optical Data Storage to Novel Electronic Memories 15:40 M. Wuttig, RWTH Aachen (Germany) Chair: M. Heilmaier, Technische Universität Darmstadt

Phase change media are among the most promising materials in information technology. They are already employed in rewriteable optical data storage, where the pronounced difference of optical properties between the amorphous and crystalline state is used. This unconventional class of materials is also the basis of a storage concept to replace flash memory. This talk will discuss the unique material properties which characterize phase change materials. In particular, it will be shown that the crystalline state of phase change materials is characterized by the occurrence of resonant bonding, a particular flavour of covalent bonding. This insight is employed to predict systematic property trends and to develop non-volatile memories with DRAM-like switching speeds potentially paving the road towards a universal memory. Phase change materials do not only provide exciting opportunities for applications including ‘greener’ stora - ge devices, but also form a unique quantum state of matter as will be demonstrated by transport measurements.

Since 1997 Full Professor of Physics at the University of Technology, Aachen, Germany • Head of Research Group: Physics of novel Materials, • Research mission: prepare and characterize novel materials with unique optical and electronic properties. • Conduct research in the fields of: a) chalcogenide based semiconductors, b) organic materials for opto-electronic applications, c) optical functional coatings. • Speaker of the Strategy Board of RWTH Aachen (since 2009) • Dean of the Faculty of Science, Mathematics and Computer Sciences (2006-2008) • Visiting professor at CRMC2 - CNRS Marseille (4/1995), AT&T Bell Laboratories, Murray Hill (1995-1997), Hangzhou University (8/1998), Kenyatta University (1999), IBM Research Center Almaden (Spring 2006), Data Storage Institute Singapore (10/2007), Shanghai Institute of Microsystems and Information, Chinese Academy of Sciences (8/2009), Stanford University (Spring 2010), Lawrence Berkeley National Laboratory (Summer 2010) • Several national and international awards

9 MSE 2010 Symposium Organisers Topic A Topic B Functional Materials Structural Materials

A2 - Intelligent Materials A4 - Polymer Nanocomposites B1 - Intermetallic Aluminides: Physical Metallurgy and Processing

H. Fritze, Technical H. Münstedt, Universi - F. Appel, GKSS University of Claust - ty of Erlangen-Nürn - Research Centre, hal, Goslar (D) berg (D) Geesthacht (D)

A. Hütten, University F. Faupel, Christian- M. Oehring, GKSS of Bielefeld (D) Albrechts University at Research Centre, Kiel (D) Geesthacht (D)

A3 - Mesoporous Jonathan D.H. Paul, GKSS Research Centre, Geesthacht (D)

M. Biener, Lawrence Livermore National Laboratory (USA) B2 - Modern Steels

H. Biermannn, TU Bergakademie Freiberg (D) J. Biener, Lawrence Livermore National Laboratory (USA)

P.R. Scheller, TU Bergakademie Freiberg (D) J. Schneider, Techni - sche Universität Darm - stadt (D) B3 - Refractory Materials

C. Aneziris, TU Bergakademie H. Peterlik, University Freiberg (D) of Vienna (A)

P. Quirmbach, Deutsches Institut für Feuerfest und A. Hamza, Lawrence Livermore National Keramik, Bonn (D) Laboratory (USA)

10 MSE 2010 Symposium Organisers Topic B Topic C Structural Materials Processing

B4 - Functional Amorphous Materials and C1 - Nanomaterials and Composites C4 - Additive Manufacturing and Field Glasses Assisted Sintering Techniques

L. Wondraczek, Uni - K. Haas, Fraunhofer J. Stampfl, Vienna versity of Erlangen- Institute for Silicate University of Nürnberg (D) Research, Würzburg Technology (A) (D)

R. Gadow, University B. Baufeld, Catholic B5 - New Methods in Materials Design of Stuttgart (D) University of Leuven (B)

W. Bleck, RWTH Aachen University (D)

Joanna R. Groza, F. Kern, University of Stttgart (D) Dept. of Chemical Engineering and H. Hoffmann, Universi - Materials Science, ty of Technology, Ber - Univ. of California lin (D) C2 - Coatings (USA)

J. Vetter, Sulzer Meta - Maria Farsari, plas, Bergisch Glad - Foundation for bach (D) Research and Technology-Hellas (FO.R.T.H.), Heraklion, B6 - Mechanical Properties and Micro - Crete (GR) structure R. Pitonak, Boehlerit P. Greil, University of H. Christ, University of GmbH & Co.KG, Erlangen-Nürnberg, Siegen (D) Kapfenberg (A) Germany (D)

M. Heilmaier, C3 - Joining Technische Universität Darmstadt (D) C. Sommitsch, Graz University of Technolo - gy (A)

U. Reisgen, RWTH Aachen University, Jue - lich (D)

11 MSE 2010 Symposium Organisers Topic D Characterisation

D1 - Microstructure Characterisation D2 - New Techniques D3 - Characterisation of Material Properties

V. Abetz, GKSS Rese - W. Hoffelner, Paul J. Olbricht, Federal arch Centre, Geest - Scherrer Institut, Villi - Institute for Materials hacht (D) gen (CH) Research and Testing, Berlin (D)

D. Rafaja, TU Berga - J. Ren, Liverpool John H.J. Maier, University kademie Freiberg Moores University of Paderborn (D) (D) (GB)

A. Froideval, Paul A. Weidner, TU Scherrer Institut, Villi - Bergakademie gen (CH) Freiberg (D)

J. Neuhaus, TU Mün - D. Holland-Moritz, chen (D) German Aerospace Center, Köln (D)

W. Neumann, Humboldt-University Berlin (D)

C. Hébert, EPFL, Lausanne (CH)

U. Kaiser, University of Ulm (D)

A. Bleloch, University of Daresbury, Liver - pool (GB)

12 MSE 2010 Symposium Organisers Topic E Topic F Modelling Biomat

E2 - Materials Processing F1 - Bio-Inspiration F3 - Interfaces

F. Hoffmann, Stiftung T. Scheibel, University K. Rezwan, University Institut für Werkstoff - of Bayreuth (D) of Bremen (D) technik, Bremen (D)

H.J. Seifert, TU Berga - I. Burgert, Max-Planck N.J. Shirtcliffe, kademie Freiberg (D) Institute of Colloids Nottingham Trent and Interfaces, Pots - University (UK) dam (D)

S.-H. Yu, University of T.F. Keller, Friedrich E3 - Nucleation, Microstructure Evolution Science and Technolo - Schiller University of and Phase Transitions gy of China Jena (D)

H. Emmerich, RWTH Aachen University (D)

C. Zollfrank, University of Erlangen-Nürnberg (D) F5 - Biomaterial Applications

I. Steinbach, Ruhr-Uni - A.R. Boccaccini, versity Bochum (D) University of Erlangen- Nürnberg (D)

- BIOKON - Biomimetics Network of Excel - lence - VDI - The Association of German E. Gamsjäger, Univer - Engineers, Society for Technologies of Life sity of Leoben (A) Sciences - Landesexzellenzcluster der Landesexzel - lenzinitiative Hamburg "Integrated Materi - als Systems"

M.C. Record,Universi - ty Aix-Marseille III (F)

E.J. Mittemeijer, Max - Planck- Institute for Metals Research, Stutt - gart (D)

13 Voreinstellung für den Datenimport am2 Tuesday Symposium: D3 Symposium: C2 Symposium: E3 Symposium: F5 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material Coatings Nucleation, Microstructure Biomaterial Applications Properties Evolution and Phase Transitions

Advanced Microstructural Coatings I Nuclation/Crystallisation Biopolymers and Composites Parallelen im Layout: links Characterisation and Damage mitte rechts Detection B. Skrotzki, Bundesanstalt für J. Vetter, Sulzer Metaplas, Bergisch H. Emmerich, Universität Bayreuth A.R. Boccaccini, Materialforschung und -prüfung, Gladbach (Germany) (Germany) Friedrich-Alexander-Universität Berlin (Germany) Erlangen-Nürnberg (Germany) 10:40 Keynote Lecture Keynote Lecture Keynote Lecture Evaluation of Polymeric Materials testing – How to Development of PVD What Can We Learn about Mixtures PLDLA/PCL and put the right questions and Ternary AlTiN, AlCrN and Nucleation from Colloidal PU/PCL for Nerve Guide get the right answers Related Coatings Systems ? Implants P.D. Portella (Sp), B. Skrotzki, P.H. Mayrhofer, University of Leoben F. Spaepen, Harvard University, P. Bednarz (Sp), M. Krzysztofinska, Federal Institute for Materials (Austria) Cambridge, MA (USA) J. Laska, University of Science and Research and Testing, Berlin Technology (AGH), Krakau (Poland) (Germany)

Phase Evolution of Magnetron Sputtered

11:00 Adhesion and Proliferation of BALB/3T3 Fibroblasts on Non-Wovens made of Recombinant Spider Silk Proteins A. Leal-Egana (Sp), G. Lang, K. Schacht, T. Scheibel, University of Bayreuth (Germany)

Highlight Lecture 11:20 Nonlinear Ultrasonic Phase Evolution of Development of Engineered Measurements for Damage Magnetron Sputtered TiCx Nucleation: Analysis as an Patches for Myocardial Characterization of /Al (0.4 x 1.2) Bilayer Athermal Process Tissue Engineering Composite Laminates Thin Films upon Annealing A.L. Greer, University of Cambridge A.R. Boccaccini (Sp), University of U. Rabe (Sp), S. Hirsekorn, A. Abdulkadhim (Sp), T. Takahashi, (UK) Erlangen-Nürnberg (Germany); R. Fraunhofer Institute for D. Music, J.M. Schneider, RWTH Rai, University of Westminster, Non-Destructive Testing, Aachen University (Germany) London (UK); E. Rosellini, Saarbrücken University of Pisa (Italy); C. (Germany) Cristallini, CNR, Pisa (Italy); N. Barbani, University of Pisa (Italy) et Solid State Devices for Oxygen Sensing

11:40 Recent Developments in the Role of the Internal Interfaces On the Impact of Surface-Modified 3D Study of Environmental in the Enhancement of Heterogeneous Nucleation Cell-Substrates from Degradation: Hydrogen Hardness and Thermal on the Peritectic Growth Polycaprolactone Produced Effect on Dislocation Stability of Nanocrystalline Mode in Ti-Al-B by Rapid Prototyping Nucleation (Ti,Al)N Coatings M. Apel (Sp), J. Eiken, U. Hecht, T. Desmet (Sp), H. Declercq, E. A. Barnoush (Sp), H. Vehoff, D. Rafaja (Sp), C. Wuestefeld, ACCESS e.V., Aachen (Germany) Berneel, R. Cornelissen, P. Dubruel, Saarland University, Saarbrücken Technical University of Freiberg Ghent University, Gent (Belgium) (Germany) (Germany); C. Baehtz, Forschungszentrum Dresden-Rossendorf; (Germany); V. Klemm, M. Dopita, Technical University of Freiberg (Germany) et

12:00 Oral Poster - Subsession Oral Poster - Subsession Competition Between Poster 1: D3-694 Poster 1: C2-103 Homogeneous and Wall Poster 2: D3-265 Poster 2: C2-297 Induced Heterogeneous Poster 3: D3-336 Poster 3: C2-498 Nucleation in Charged Poster 4: D3-163 Poster 4: C2-506 Colloidal Model Systems Poster 5: D3-749 Poster 5: C2-520 A. Engelbrecht, R. Meneses, H.J. Schöpe (Sp), Johannes Gutenberg University Mainz (Germany)

14 Role of the Internal Interfaces in the Voreinstellung für den Datenimport Tuesday am2 Symposium: A2 Symposium: B6 Symposium: C1 Room: A5 Room: A03 Room: A04 Intelligent Materials Mechanical Properties and Nanomaterials and Microstructure Composites

Intelligent Materials Cast Iron and Steel (Martensitic, Nano1 Parallelen im Layout: links TRIP, TWIP) mitte rechts

H. Fritze, Technische Universität H.-J. Christ, Universität Siegen F. Kern, Universität Stuttgart Clausthal, Goslar (Germany) (Germany) (Germany)

Study of Pt Based Representing Local Nano-Structure and 10:40 Metallisation Layers for Accumulations of Minor Properties of Cellulose High Temperature SAW Defects in Ductile Cast Iron M. Ioelovich, O. Figovsky (Sp), Sensors by an Appropriate Material Polymate Research Centre, Migdal Ha G. Bruckner (Sp), J. Bardong, R. Model Emek (Israel) Fachberger, Carinthian Tech Research M. Suty (Sp), H.-C. Schneider, O. AG, Villach (Austria); B. Wall, Kraft, Karlsruhe Institute of Vectron International, Teltow Technology, (Germany) Eggenstein-Leopoldshafen (Germany) Phase Evolution of Magnetron Sputtered

Solid State Devices for Determination of Homo and Heterometallic 11:00 Oxygen Sensing and Stress-Strain Curves in a Iron Alkoxides as Novel Control Cast TRIP-Steel under Biaxial Precursors for Material M. Schulz (Sp), Technical Planar Loading Applications University of Clausthal, Goslar K. Nagel, D. Kulawinski (Sp), S. T. Fischer (Sp), G. Fornalczyk, S. (Germany); C. Stenzel, Astrium Henkel, H. Biermann, Technical Mathur, University of Cologne, Köln Space Transportation, University of Freiberg (Germany); P. (Germany) Friedrichshafen (Germany); H. Fritze, Hübner, University of Applied Technical University of Clausthal, Sciences, Mittweida (Germany) Goslar (Germany)

Tunnel Spectroscopy of Relation between Damage Metal Salt Induced Synthesis 11:20 Magnetic Tunnel Junctions Nucleation and of Hybrid Metal with Heusler Electrodes Microstructure in TRIP Steels Core-Siloxane Shell A. Thomas (Sp), D. Ebke, P. K. DAVUT (Sp), S. Zaefferer, Nanoparticles and Siloxane Thomas, V. Drewello, O. Schebaum, Max-Planck-Institut for Iron Nanowires University of Bielefeld (Germany) Research, Düsseldorf (Germany) A. Goyal (Sp), A. Kumar, P.M. Ajayan, Rice University, Houston (USA)

Solid State Devices for Oxygen Sensing

Heusler Compounds for Microstructure Evolution in Maskless Printed MIM 11:40 Spintronics Applications - TWIP Steels during Capacitors with Nanosized From Half-Metallic Deformation with Strain Path Silver Inks and Barium Ferromagnets to Topological Changes Titanate Filled Insulators N.-N. Elhami (Sp), S. Zaefferer, Max Inorganic-Organic Hybrid S. Chadov (Sp), C. Felser, Johannes Planck Institute for Iron Research Polymers (ORMOCER(R)s) Gutenberg-Universität, Mainz GmbH, Düsseldorf (Germany); I. J. Bahr (Sp), G. Domann, R. (Germany) Thomas, H. Hoffmann, Houbertz, Frauhofer Institut für Thyssenkrupp Steel Europe AG, Silicatchemie, Würzburg (Germany); Dortmund (Germany) V. Zöllmer, C. Werner, Fraunhofer IFAM, Bremen (Germany)

Oral Poster - Subsession Oral Poster - Subsession 12:00 Poster 1: A2-466 Poster 1: C1-672 Poster 2: A2-763 Poster 2: C1-675 Poster 3: A2-298 Poster 4: A2-319 Poster 5: A2-711

15 Role of the Internal Interfaces in the Voreinstellung für den Datenimport pm1 Tuesday Symposium: D3 Symposium: C2 Symposium: E3 Symposium: F5 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material Coatings Nucleation, Microstructure Biomaterial Applications Properties Evolution and Phase Transitions

Closing Event DFG Research Unit Coatings II Steel Application Scaffolds / Tissue Engineering Parallelen im Layout: links "Ultra Fine Grained Materials" (I) mitte rechts

H.J. Maier, Universität Paderborn J. Vetter, Sulzer Metaplas, Bergisch E. Gamsjäger, Montanuniversität A.R. Boccaccini, (Germany) Gladbach (Germany) Leoben (Austria) Friedrich-Alexander-Universität Erlangen-Nürnberg (Germany) 14:30 Thermal Stability of an Unique Pattern Formation in Deformation of the Strand Gas Phase Sintering of Ultra-Fine Grained CVD Hard Coatings Shell during Peritectic Hydroxyapatite / AlMnFe-Alloy Produced by R. Pitonak (Sp), Boehlerit GmbH & Transformation Beta-Tricalcium Phosphate Equal Channel Angular co.KG, Kapfenberg (Austria); J. M. Zeng, I. Steinbach (Sp), Scaffolds for Bone Pressing Garcia, Helmholtz-Zentrum Berlin für Ruhr-University Bochum (Germany) Replacement Applications R. Berghammer (Sp), A. Rott, W. Hu, Materialien und Energie GmbH M. Schlosser (Sp), H.J. Kleebe, RWTH Aachen University (Germany); (Germany) Technische Universität Darmstadt A. Hasani, Universite Paul Verlaine, (Germany) Metz Ile du Saulcy (France); G. Bio-Active Plasma Gottstein, RWTH Aachen University Nanocomposite (Germany) Preparation, Chemical

14:50 Investigation of the Bio-Active Plasma Physically-Based Fabrication of Crack-Free Annealing Behavior of Nanocomposite Coatings through-Process Model for Ceramic Micropatterns by a Severely Deformed Ultra Fine Through Controlled Silver the Prediction of Modified Moulding Grained Cu-Zr Using Release Microstructure Evolution Technique Advanced Microstructure D. Hegemann (Sp), E. Körner, Empa, during Processing of Dual M. große Holthaus (Sp), L. Treccani, Characterization Techniques St.Gallen (Switzerland) Phase Steels K. Rezwan, University of Bremen A. Khorashadizadeh (Sp), M. J. Rudnizki (Sp), U. Prahl, W. Bleck, (Germany) Winning, S. Zaefferer, D. Raabe, Max RWTH Aachen University (Germany) Planck Institute for Iron Research GmbH, Düsseldorf (Germany)

15:10 The Effect of Ultra-Fine Grain Preparation, Chemical A model on the Formation Hydrothermal Conversion of Sizes on Microstructure and Characterisation and of Butterfly-Type Martensite Biogenic Carbonates for Functional Properties in Mechanical Investigation of in Fe-30 % Ni Alloy Using Bone Replacement Ni-rich NiTi Shape Memory Sol-Gel Derived ZrO2-SiO2 the 3D-Phase-Fields Model Applications Alloys Coatings J. Kundin (Sp), H. Emmerich, RWTH S. Schultheiß (Sp), I. Sethmann, J.A. Burow, E. Payton (Sp), Ruhr I. Uhlmann (Sp), J. Pradella, Merck Aachen University (Germany) H.-J. Kleebe, Technische Universität University of Bochum (Germany); KGaA, Darmstadt (Germany); J. Darmstadt (Germany) E.A. Prokofiev, Ufa Sate Aviation Rödel, Technische Universität Technical University (Russian Darmstadt (Germany) Federation); R. Zametta, J. Frenzel, Ruhr University of Bochum (Germany) et al. Orientation of Mesoporous

15:30 Fatigue Behavior of Oral Poster - Subsession Influence of Lattice Defects Tissue Engineered Ultra-Fine Grained Alloys Poster 1: C2-74 on Nucleation and Growth Macroporous Gelatin-Based under Cyclic Loading: Poster 2: C2-118 of Different Modifications of Cryogels with Anisotropic Microstructural Aspects of Poster 3: C2-533 Nanoprecipitates of AlN in Porosity for Wound Healing Crack Initiation and Crack Poster 4: C2-568 Nitrided Fe-Al Alloy Applications Propagation S. Meka (Sp), E. Bischoff, Max R. Shevchenko (Sp), University of T. Niendorf (Sp), H.J. Maier, Planck Institute for Metals Research, Brighton (UK); M. Eeman, StratiCELL, University of Paderborn (Germany) Stuttgart (Germany); R.E. Schacherl, Gembloux (Belgium); I.N. Savina, University of Stuttgart (Germany) et I.U. Allan, S.L. James, University of al. Brighton (UK); M. Salmon, StratiCELL, Gernbloux (Belgium) et al.

15:50 Influence of Backpressure Multi Phase Cellular during Equal Channel Automaton Simulation of Angular Pressing on the the Heat Treatment of Dual Fatigue Behaviour of Phase Steel AA5754 and Cu 99.5 F. Roters (Sp), Y. Li, N. Peranio, U. A. Böhner (Sp), University of Witt, D. Raabe, Max-Planck-Institut Erlangen-Nürnberg (Germany); R. für Eisenforschung GmbH, Lapovok, Monash University, Düsseldorf (Germany) Clayton (USA); H.W. Höppel, M. Göken, University of Erlangen-Nürnberg (Germany)

16 Oral Poster - Subsession Voreinstellung für den Datenimport Tuesday pm1 Symposium: A3 Symposium: B6 Symposium: C1 Room: A5 Room: A03 Room: A04 Mesoporous Mechanical Properties and Nanomaterials and Microstructure Composites

Mesoporous Steels (Austenitic, Duplex, ODS) Nano 2 Parallelen im Layout: links mitte rechts

H. Peterlik, Universität Wien (Austria) H.-J. Christ, Universität Siegen K.-H. Haas, Fraunhofer Institut für (Germany) Silicatforschung, Würzburg (Germany) Highlight Lecture Highlight Lecture Highlight Lecture 14:30 Behavior of Nanoporous In-Situ XRD Investigations on Novel Zirconia-Alumina Carbon Aerogels in Liquid the Deformation Behavior of Nanocomposites Combining Hydrogen a Nanostructured ODS Steel High Strength and A. van Buuren (Sp), T. Willey, S. P. Schloth (Sp), Paul-Scherer Toughness Kucheyev, J.R.I. Lee, T. Baumann, J. Institute, Villigen (Switzerland); P. F. Kern (Sp), R. Gadow, University Biener, A. Hamza, Lawrence Susila, Indian Institute of of Stuttgart (Germany) Livermore National LAboratory Technology, Chennai (India); S. (USA); J. Ilavsky, A. Deriy, Argonne Van Petegen, Paul Scherrer Institute, National Laboratory (USA) Villigen (Switzerland) et al. Bio-Active Plasma Nanocomposite Preparation, Chemical

Orientation of Mesoporous Microstructure and Effect of Microstructure 14:50 Structures Mechanical Properties of Defects on the High S. Pabisch (Sp), M. Weinberger, New lean Duplex Stainless Pressure/High Temperature University of Vienna, Wien (Austria); Steels Synthesis of Boron Nitride N. Hüsing, University of Salzburg C. Herrera (Sp), D. Ponge, D. Raabe, Nanocomposites (Germany); H. Peterlik, University of Max Planck Institute for Iron C. Schimpf (Sp), M. Schwarz, T. Vienna, Wien (Austria) Research GmbH, Düsseldorf Barsukova, V. Klemm, E. Kroke, D. (Germany) Rafaja, Technical University of Freiberg (Germany)

Controlled Synthesis of 3-D High Temperature Fatigue High Velocity Suspension 15:10 Nanowire Networks by Ion Testing and 475°C Flame Spraying (HVSFS) of Track-Template Embrittlement of Duplex Ceramic Nano Powders Electrodeposition Stainless Steel F. Kern (Sp), A. Killinger, A. Manzat, M. Rauber (Sp), R. Neumann, M.E. K. Wackermann (Sp), H.-J. Christ, A. Gadow, University of Stuttgart Toimil-Molares, GSI University of Siegen (Germany) (Germany) Helmholtzzentrum für Schwerionenforschung, Darmstadt (Germany); W. Ensinger, Technische Universität Darmstadt (Germany) Orientation of Mesoporous

Electrically Tunable Investigation on Strain Oral Poster - Subsession 15:30 Nanoporous Carbon Hardening Behaviour of Poster 1: C1-482 Aerogel Actuators Metastable Austenitic Poster 2: C1-556 L. Shao (Sp), Karlsruher Institute of Stainless Steels Poster 3: C1-586 Technology, T. Labudde (Sp), M. Wildau, W. Poster 4: C1-596 Eggenstein-Leopoldshafen Bleck, RWTH Aachen University Poster 5: C1-597 (Germany); J. Biener, Lawrence (Germany) Livemore Nationla Laboratory, California (USA) et al.

Oral Poster - Subsession Temperature and 15:50 Poster 1: A3-246 Strain-Time Phasing Effects Poster 2: A3-154 on the Thermomechanical Poster 3: A3-655 Fatigue Behaviour of 316L(N) Austenitic Stainless Steel A. Nagesha (Sp), R. Kannan, P. Parameswaran, R. Sandhya, Indira Gandhi Centre for Atomic Research, Kalpakkam (India); K. Bhanu Sankara Rao, University of Hyderabad (India) et al.

17 Oral Poster - Subsession Voreinstellung für den Datenimport pm2 Tuesday Symposium: D3 Symposium: C2 Symposium: E3 Symposium: F5 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material Coatings Nucleation, Microstructure Biomaterial Applications Properties Evolution and Phase Transitions

Closing Event DFG Research Unit Coatings III Thermodynamic Concepts Bioceramics, Metals and Parallelen im Layout: links "Ultra Fine Grained Materials" (II) Nanomaterials for Biomedical mitte rechts Applications M. Göken, R. Pitonak, Boehlerit GmbH & I. Steinbach, Ruhr-Universität A.R. Boccaccini, Friedrich-Alexander-Universität Co.KG, Kapfenberg (Austria) Bochum (Germany) Friedrich-Alexander-Universität Erlangen-Nürnberg (Germany) Erlangen-Nürnberg (Germany) 16:40 Accelerated Grain INVITED: Plasma Spray – First-Principles Study of the Development and Refinement during PVD: A New Technology Ti-Fe Eutectic System Characterisation of Accumulative Roll Bonding between Thermal Spraying L.-F. Zhu (Sp), M. Friak, A. Dick, T. Functionalised Ceramic by Nanoparticle and PVD Hickel, Max Planck Institute for Iron Microtubes for Bacteria Reinforcement K. von Niessen, Sulzer Metco AG, Research GmbH, Düsseldorf Filtration C.W. Schmidt (Sp), V. Maier, C. Wohlen (Switzerland) (Germany); J. Huber, H. Emmerich, S. Kroll (Sp), L. Treccani, G. Knieke, H.W. Höppel, W. Peukert, M. RWTH Aachen University (Germany) Grathwohl, K. Rezwan, University of Göken, University of et al. Bremen (Germany) Erlangen-Nürnberg (Germany) Novel Nanostructured, Novel TiAlN and TiAlCN Coatings by

17:00 Equal-Channel Angular Novel Nanostructured, Microstructure Evolution: Dielectric Spectroscopy and Pressing of Medium- to Easy-to-Clean and Wear Thermodynamic Concepts Microstructure of Sintered High-Strength Precipitation Resistant J. Svoboda (Sp), Academy of Calcium Titanate (CaTiO3) Hardening Aluminium SiOx/[Si(NCN)2]n-Based Science of the Czech Republic, Brno Samples With Different Wrought Alloys Sol-Gel Coatings (Czech Republic); M. Gamsjäger, Porosities M. Hockauf (Sp), P. Frint, S. E. Ionescu (Sp), Technische F.D. Fischer, Montanuniversität G. Rott (Sp), F. Zhang, J. Wagner, S. Fritsch, K. Hockauf, D. Universität Darmstadt (Germany); W. Leoben (Austria) Schlichting, J. Haba, W. Kröger, E. Nickel, M. Wagner, Chemnitz Kolbe, Heidelberger Druckmaschinen Burkel, Rostock University University of Technology AG (Germany); J. Harenburg, M. (Germany) (Germany) Zschuppe, FEW Chemicals, Wolfen (Germany); R. Riedel, Technische Universität Darmstadt (Germany)

Highlight Lecture 17:20 Thermally Activated Novel TiAlN and TiAlCN Ab Initio Determination of Dislocation Movement and Coatings by LPCVD Thermodynamic Properties Characterization of Biomaterials Using Creep in Ultra-Fine-Grained I. Endler (Sp), M. Höhn, Fraunhofer up to the Melting Point Synchrotron Radiation and Nanocrystalline Nickel Institute for Ceramic Technologies B. Grabowski (Sp), L. Ismer, T. Based Microtomography K. Schüler (Sp), B. Philippi, W. and Systems, Dresden (Germany) Hickel, J. Neugebauer, Weinmann, H. Vehoff, Saarland Max-Planck-Institut für F. Beckmann (Sp), GKSS Research University, Saarbrücken (Germany) Eisenforschung GmbH, Düsseldorf Centre, Geesthacht (Germany); F. (Germany) Witte, Medizinische Hochschule Hannover (MHH) (Germany); B. Müller, University of Basel (Switzerland) et al. Preparation and Properties of Some

17:40 Microstructure, Mechanical In Situ Monitoring of UV Modeling the Kinetics of Development and Behavior and Deformation Curing of Acrylate Coatings Diffusive Phase Characterization of Mechanisms of S. Agarwal (Sp), H. Oehler, D. Transformations Open-Cell Ti6Al7Nb Implant Nanocrystalline Ni-Fe Lellinger, I. Alig, Deutsches E. Gamsjäger (Sp), University of Structures for Bone J. Zimmermann (Sp), S. Van Kunststof-Institut, Darmstadt Leoben (Austria); J. Svoboda, Replacement Petegem, Paul Scherrer Institute, (Germany) Academy of Sciences of the Czech M. Altindis (Sp), U. Krupp, Villigen (Switzerland); S. Republic, Brmo (Czech Republic); University for Applied Sciences of Brandstetter, M. Legros, F.D. Fischer, University of Leoben Osnabrück (Germany); T. Guillen, A. CEMES-CNRS, Toulouse (France); X. (Austria) Ohrndorf, University of Siegen Sauvage, University of Rouen, (Germany); K. Hagemann, A. Saint-Etienne du Rouvray (France) et Bührig-Polaczek, RWTH Aachen University (Germany) et al.

18:00 Oral Poster - Subsession Oral Poster - Subsession A Theoretical Approach to Oral Poster - Subsession Poster 1: D3-462 Poster 1: C2-605 Understanding the Effect of Poster 1: F5-189 Poster 2: D3-137 Poster 2: C2-650 Substrate Geometry on Poster 2: F5-439 Poster 3: D3-442 Poster 3: C2-348 Tissue Growth Poster 3: F5-599 Poster 4: D3-657 Poster 4: C2-119 J. Dunlop (Sp), Max Planck Poster 4: F5-64 Poster 5: D3-738 Institute of Colloids and Interfaces, Potsdam (Germany); E. Gamsjäger, Montanuniversität Leoben (Austria); M. Rumpler, Ludwig Boltzmann Institute of Osteology, Vienna (Austria) et al.

18 In Situ Monitoring of UV Curing of Voreinstellung für den Datenimport Tuesday pm2 Symposium: A4 Symposium: B6 Symposium: C1 Room: A5 Room: A03 Room: A04 Polymer Nanocomposites Mechanical Properties and Nanomaterials and Microstructure Composites

Polymer Nanocomposites Mg-Alloys Nano 3 Parallelen im Layout: links mitte rechts

F. Faupel, T. Bernthaler, Hochschule Aalen F. Kern, Universität Stuttgart Christian-Albrechts-Universität zu (Germany) (Germany) Kiel (Germany) Modellierung und Deformation, Shear Banding Enhanced Production 16:40 Simulation erzielbarer and Ductility in Mg and Method for Fibre Reinforced Partikelgrößen in Mg-Y Aluminium Matrix Nanokompositen am S. Sandlöbes (Sp), S. Zaefferer, I. Composites Beispiel der mechanischen Schestakow, J. Chen, Max Planck E. Wüller (Sp), T. Burbach, A. Dispergierung von Institute for Iron Research GmbH, Bührig-Polaczek, RWTH-Aachen TiO2-Nanopartikelagglomer Düsseldorf (Germany); S. Yi, (Germany) M. Englert (Sp), A.K. Schlarb, GKSS-Forschungszentrum University of Kaiserslautern Magnesium Innovation Center, (Germany) Novel Geesthacht (Germany) Nanostructured, Novel TiAlN and TiAlCN Coatings by

Preparation and Properties Microstructural Investigation Preparation of Bulk 17:00 of Some of a Texturized State of Nanocrystalline Cu-Nb Polyurethane/Layered Magnesium Wrought Alloy K. Eymann (Sp), T. Riedl, A. Silicate Nanocomposites AZ31 after Repeated Tensile Kirchner, A. Bram, M. Ruhnow, B. A. Saad (Sp), National Research and Compressive Loading Kieback, Technische Universität Centre, Cairo (Egypt); O.I.H. Dimitry, K. Anten (Sp), U. Noster, B. Dresden (Germany) Z.I. Abdeen, E.A. Ismail, Egyptian Scholtes, University of Kassel Petroleum Research Institute, Cairo (Germany) (Egypt)

Polymer Composites Microstructure and Spark Plasma Sintering of 17:20 Reinforced By Mechanical Properties of Nanocrystalline WC-Co Montmorillonite Extruded Magnesium ME21 Hard Metals K. Ergin (Sp), S. Kaloshkin, V. Sheets M. Dopita (Sp), A. Saloman, D. Tcherdyntsev, A. Maksimkin, S. Gall (Sp), M. Huppmann, S. Chmelik, H.J. Seifert, Technical National University of Science and Müller, W. Reimers, Technical University of Freiberg (Germany) Technology "MISIS", Moscow University of Berlin (Germany) (Russian Federation) et al.

Preparation and Properties of Some

Rheological and Electrical Adjustment of the Texture Oral Poster - Subsession 17:40 Characterization of and the Mechanical Poster 1: C1-600 Poly(methyl Methacrylate) Properties of the Extruded Poster 2: C1-43 Filled with Various Mg Alloy ME21 by Poster 3: C1-417 Conductive Particles Variation of the Process C. Triebel (Sp), N. Katsikis, H. Parameters Münsstedt, University M. Huppmann (Sp), S. Gall, S. Erlangen-Nürnberg (Germany) Müller, W. Reimers, Technical University of Berlin (Germany)

Transparent Conductors Study on the Creep 18:00 Based on Metal-Polymer Properties and Creep Failure Nanocomposites Mechanisms of M. Keshavarz Hedayati (Sp), V.S.K. Mg-10Gd-3Y-0,4Zr Chakravadhanula, V. (GW103K) Alloy Zaporojtchenko, M. Elbahri, F. V. Janik (Sp), Q. Wang, D. Yind, W. Faupel, Ding, Shanghai Jiaotong University Christian-Albrechts-University of Kiel (China) (Germany)

19 In Situ Monitoring of UV Curing of Voreinstellung für den Datenimport am1 Wednesday Symposium: D3 Symposium: D2 Symposium: E2 Symposium: F1 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material New Techniques Materials Processing Bio-Inspiration Properties

Thermophysical, Chemical and Technical Applications Solidification Biomineralization Parallelen im Layout: links Structural Characterisation of mitte rechts Materials D. Holland-Moritz, Deutsches W. Hoffelner, Paul Scherrer Institut, S. Denis, Ecole de Mines, Nancy I. Burgert, Max-Planck-Institut für Zentrum für Luft- und Raumfahrt Villigen (Switzerland) Cedex (France) Kolloid- und e.V., Köln (Germany) Grenzflächenforschung, Golm 08:30 Characterization of the Analysis of Pore Numerical Determination of Keynote(Germany) Lecture Corrosion Behaviour of a Morphology and Thermal Process Parameters for Mineralized Biomaterials: Free Machining Titanium Conductivity of Alternative Fabrication of Automotive Learning From Nature Alloy EB-PVD Deposited Component About Solutions to Basic F. Depentori (Sp), DECHEMA e. V., TBC-Compositions M. Sadeghi (Sp), J. Mahmoudi, Problems Frankfurt (Germany); J. Laukart, B. Saruhan-Brings (Sp), German Mälardalen University, Vasteras S. Weiner, Weizmann Institute of University of Braunschweig Aerospace Center (DLR), Cologne (Sweden) Science, Rehovot (Israel) (Germany); S. Benfer, W. Fürbeth, (Germany); V. Ryukhtin, DECHEMA e. V., Frankfurt (Germany) Helmholtz-Zentrum Berlin for Residual Strain Materials and Energy (Germany); K. Measurements on a Kelm, German Aerospace Center Application of (DLR), Köln (Germany) Neutron radiography

08:50 Electrochemical and Residual Strain Influence of the Anisotropy Structural Investigation of Li Measurements on a of Permeability on the Intercalation into Y2Ti2O5S2 Single-Crystal Nickel-Based Macrosegregation N. Schweikert (Sp), Karlsruhe Superalloys Turbine Blade Formation in Continuous Institute of Technology, Using Neutron Diffraction Cast Steel Eggenstein-Leopoldshafen S. Pierret (Sp), A. Evans, Paul J. Domitner (Sp), M. Wu, A. (Germany); J. Cabana, State Scherrer Institut, Villigen Kharicha, A. Ludwig, University of University of New York, Stony (Switzerland); A. Paradowska, ISIS, Leoben (Austria) Brook (USA); W.-S. Yoon, Rutherford Appleton Laboratory, Brookhaven National Laboratory, Oxfordshire (UK); T. Etter, Alstom Ltd, Baden (Switzerland) et al.

09:10 Mechanosynthesis, Application of Neutron Numerical Simulation of Biotemplating of Inorganic Structure, and radiography to study Dendritic Structures under Materials Electrochemical Behavior of Material Processes during Constrained Solidification C. Zollfrank, University of Complex Tin Oxides Hypothetical Severe Conditions during Laser Erlangen-Nürnberg (Germany) S. Becker (Sp), M. Scheuermann, V. Accidents in Nuclear Cladding Sepelák, Karlsruhe Institute of Reactors V. Fallah (Sp), M. Alimardani, S. Technology, M. Große, Forschungszentrum Corbin, A. Khajepour, University of Eggenstein-Leopoldshafen Karlsruhe GmbH (Germany) Waterloo, Waterloo, Ontario (Germany); I. Bergmann, (Canada) Volkswagen AG, Wolfsburg (Germany) et al. Hydrogen Solubility and Diffusion in

09:30 Influence of Chemical and Characterisation of Computer Simulation of the Phage Display: Identification Microstructural Parameters Laser-Welded Materials by Thin Shell Casting (TSC) of Peptides Interacting with on the Radiative Properties Grating-Based Process for Directional Inorganic Surfaces (300 K - 1200 K) of a Phase-Contrast Imaging Solidification of Superalloys D. Rothenstein (Sp), J. Bill, La2-xNiO4+d Cathodic J. Herzen (Sp), F. Beckmann, GKSS T. Han (Sp), D. Ma, H. Lu, A. University of Stuttgart (Germany) Layers Research Centre, Hamburg Bührig-Polaczek, RWTH Aachen M.-T. Ta (Sp), J.Y. Rolland, E. (Germany); T. Donath, C. David, University (Germany) Veron, S. Ory, P. Echegut, B. Paul-Scherrer Institute, Villingen-PSI Rousseau, CNRS, Orléans (France); (Switzerland); F. Pfeiffer, Technical M. Rieu, R. Dugas, F. Ansart, CNRS University Munich (Germany) et al. CIRIMAT -UMR 5085, Toulouse (France) et al.

09:50 Oral Poster - Subsession Sulphur Poisoning of Ni Enamel’s Size-Dependent Poster 1: D3-316 Catalysts: A combined S Elastic/Inelastic Behavior Poster 2: D3-46 K-edge XAS - DFT Over Millimeter and Poster 3: D3-543 Simulation Study. Nanometer Length Scales R. Struis (Sp), I. Czekaj, C. Ludwig, S.F. Ang (Sp), E.L. Bortel, Hamburg Paul Scherrer Institute, Villigen University of Technology (Switzerland) (Germany); M.V. Swain, University of Sydney, NSW (Australia); A. Klocke, University of California, San Francisco (USA) et al.

20 Characterisation of Laser-Welded Voreinstellung für den Datenimport Wednesday am1 Symposium: B2 Symposium: B6 Symposium: C1 Room: A5 Room: A03 Room: A04 Modern Steels Mechanical Properties and Nanomaterials and Microstructure Composites

Aspects of Modern Steels UFG Metals and Alloys Nano 4 Parallelen im Layout: links mitte rechts

P. Scheller, TU Bergakademie J. Freudenberger, Leibniz-Institut für K.-H. Haas, Fraunhofer Institut für Freiberg (Germany) Festkörper- und Werkstoffforschung Silicatforschung, Würzburg Dresden (Germany) (Germany) Hydrogen Embrittlement of Deformation Processes in Effects of MWCNTs as 08:30 Steels – Thermo Analytic Nanocrystalline Palladium Reinforcement in Ceramic Characterization of Effusing and Palladium Gold Alloys SiCN Fibers Hydrogen prepared by Magnetron O. Flores (Sp), University of P. Ried (Sp), M. Gabler, K. Beyer, F. Sputtering Bayreuth (Germany); D. Koch, Freigang, R. Müller, H. Kipphardt, T. A. Castrup (Sp), Technical University of Bremen (Germany); W. Kannengießer, Federal Institute for University of Darmstadt (Germany); Krenkel, G. Motz, University of Material Research and Testing, Berlin C. Kübel, T. Scherer, Y. Ivanisenko, Bayreuth (Germany) (Germany) H. Hahn, Karlsruhe Institute of Residual Strain Technology, Measurements on a Eggenstein-Leopoldshafen, Application of (Germany) Neutron radiography

Hydrogen Solubility and Incipient Plasticity, Activation Novel Hybrid Polymer 08:50 Diffusion in Austenitic Volume and Strain Rate Capsules via Microextrusion Stainless Steels Studied with Sensitivity of Nanostructured and UV-Curing Thermal Desorption Metals T. Ballweg, C. Gellermann, K.-H. Spectroscopy Y.M. Wang (Sp), R. Ott, A.V. Hamza, Haas (Sp), Fraunhofer Institute for Y. Yagodzinskyy (Sp), O. Lawrence Livermore National Silicate Research, Würzburg Todoshchenko, S. Papula, H. Laboratory (USA) (Germany) Hänninen, Helsinki University of Technology, Espoo (Finland)

Investigation of Voids Improvement of Mechanical Fabrication and Device 09:10 Nucleation and Damage Properties of AZ91Mg Alloy Applications of Propagation in Dual Phase by Multi-Directional Forging CdS(Te)@SnO2 Nanowire Steels and Ultra Grain Refinement Heterostructures A.-P. Pierman (Sp), T. Pardoen, P.J. H. Miura (Sp), H. Liu, The University J. Li, J. Pan, H. Shen, S. Mathur Jacques, Université catholique de of Electro-Communications, Chofu (Sp), University of Cologne, Köln Louvain, Louvain-la-Neuve (Japan) (Germany) (Belgium)

Hydrogen Solubility and Diffusion in

A new Bainitic Steel for Cold Grain Size Effects on Silicon Oxycarbide/Hafnia 09:30 Heading Applications Deformation Mechanisms in Ceramic Nanocomposites – J. Kruse, Lemförder GmbH Ferrite/Martensite Preparation and (Germany); S. Hasler (Sp), U. Urlau, Dual-Phase Steels High-Temperature Behavior Swiss Steel AG, Emmenbrücke M. Calcagnotto (Sp), D. Ponge, E. Ionescu (Sp), B. Papendorf, H.-J. (Switzerland) Max-Planck-Institut für Kleebe, R. Riedel, Technische Eisenforschung GmbH, Düsseldorf Universität Darmstadt (Germany) (Germany); Y. Adachi, National Institute for Materials Sciencei, Tsukuba Ibaraki (Japan) et al.

Oral Poster - Subsession Damascene Light Weight Oral Poster - Subsession 09:50 Poster 1: B2-39 Metals Poster 1: C1-665 Poster 2: B2-155 T. Marr (Sp), J. Freudenberger, H. Poster 2: C1-764 Poster 3: B2-157 Klauß, L. Schultz, Leibniz Institute Poster 3: C1-33 Poster 4: B2-455 for Solid State and Materials Poster 4: C1-570 Research Dresden (Germany)

21 Characterisation of Laser-Welded Voreinstellung für den Datenimport am2 Wednesday Symposium: D3 Symposium: D2 Symposium: E2 Symposium: F1 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material New Techniques Materials Processing Bio-Inspiration Properties

Materials Testing under Near-Service Combined and In-Situ Testing I Forming Self-assembly and Biopolymers Parallelen im Layout: links Conditions mitte rechts

J. Olbricht, Bundesanstalt für A. Froideval, Paul Scherrer Institut, O. Keßler, Universität Rostock T. Scheibel, Universität Bayreuth Materialforschung und -prüfung, Villigen (Switzerland) (Germany) (Germany) Berlin (Germany) 10:40 A Testing Apparatus for Micro Powder Injection Fast, Physically-Based New Approaches Towards Creep Experiments on Moulding: Investigation of Algorithms for On-line Responsive non-Covalent Corrosion Condition Powder - Binder Separation Calculations of Texture and Biopolymer Network M. Talík (Sp), T. Vlasak, J. Mlnarik, Using Synchrotron-CT and Anisotropy during Materials with Advanced Research Centre SVUM a.s., Prague 3D-Image Analysis Fabrication of Steel Sheets Elastic Properties (Czech Republic) O. Weber (Sp), Karlsruhe Institute of M. Winning (Sp), D. Raabe, S. Schiller (Sp), M. Huber, Technology, Max-Planck-Institute for Iron Albert-Ludwig-University of Freiburg Eggenstein-Leopoldshafen Research, Düsseldorf (Germany) (Germany) (Germany); C. Redenbach, Technical In-Situ Observation University of Kaiserslautern of Hydrogen Effusion (Germany) et al. Structure Formation in Colloidal Thin

11:00 The Effect of High In-Situ Observation of Fast Simulation System for Bioinsipred Nanocomposite Temperature Corrosion in Hydrogen Effusion in Analysis of Multistage Hot Materials for Technical CO2 Rich Flue Gases on the ARMCO-Iron Using Neutron Rolling Process of Flat Applications Mechanical Properties of Radiography Products J. Raff (Sp), U. Weinert, T. Günther, Super Heater Materials K. Beyer (Sp), T. Kannengießer, A. M. Graf (Sp), M. Schmidtchen, R. A. Marquard, Forschungszentrum J. Olbricht (Sp), H. Klingelhöffer, D. Griesche, Federal Institute for Kawalla, Technical University of Dresden-Rossendorf e.V. (Germany); Hünert, A. Kranzmann, B. Skrotzki, Materials Research and Testing, Freiberg (Germany) S. Matys, Technische Universität Federal Institute for Materials Berlin (Germany); B. Schillinger, Dresden (Germany) et al. Research and Testing, Berlin University of Technology Munich (Germany) (Germany)

11:20 CFRP Shield against Debris Structure Formation in Fast Models for Recombinant Spider Silk as by Oblique Collision Colloidal Thin Films by Online-Optimization during a Biocompatible Surface I. Shiota (Sp), Salesian Polytechnic, Self-Assembly Open Die Forging Interface Tokyo (Japan); H. Kohri, Kogakuin S.V. Roth (Sp), A. Kashem, A. D. Recker (Sp), M. Franzke, G. Hirt, A. Smith (Sp), K. Spieß, A. Leal, T. University, Tokyo (Japan); M. Kato, Buffet, R. Gehrke, G. Herzog, J. RWTH Aachen (Germany) Scheibel, University of Bayreuth Salesian Polytechnic, Tokyo Perlich, A. Rothkirch, M. (Germany) (Japan); A. Yumoto, Kogakuin Schwartzkopf, S. Wannabaipoon, university, Tokyo (Japan) et al. DESY, Hamburg (Germany); M. Burghammer, ESRF, Grenoble (France) et al. Transformation-Indu ced Plasticity in

11:40 Four-Point Bending with In Situ Laue The Effect of Hydrofoming Mussel Byssal Threads - Acoustic Emission Micro-Diffraction during Parameters on the Response Analysis of a Biological Measurement for Lifetime Compression of Mo of Corrugated Braided Composite Gradient Material Assessment of Thermal Micropillars. Hoses A.V. Golser (Sp), A. Hagenau, M. Barrier Coatings J. Zimmermann (Sp), S. Van H. Hachemi (Sp), J.M. Roelandt, H. Heim, M.H. Suhre, E. Lintz, T. M. Rudolphi (Sp), D. Renusch, M. petegern, Paul Scherrer Institute, Kebir, Université de Technologie de Scheibel, University of Bayreuth Schütze, DECHEMA e.V., Frankfurt Villigen (Switzerland); H. Bei, Oak Compiègne, Compiegne (France) (Germany) (Germany) Ridge Natl Lab (USA); E.P. George, University of Tennessee, Dept Mat Sci & Engn, Knoxville, USA; (USA) et al.

12:00 Oral Poster - Subsession EXAFS, XANES and DFT Efficient, Robust Simulation Oral Poster - Subsession Poster 1: D3-202 Study of the Multif Erroic Algorithms for Poster 1: F1-191 Poster 2: D3-368 Mixed-Valence Compound Material-Process-Chain Poster 2: F1-339 Poster 3: D3-349 YMn2O5: Site-Selective Analysis and Optimization Poster 3: F1-696 Poster 4: D3-540 Substitution of Fe for Mn in Metal Forming Poster 4: F1-518 T. Leisegang (Sp), Technical M. Schaper (Sp), Leibniz Universität Univerity of Dresden (Germany); T. Hannover, Garbsen (Germany); O. Weißbach, Technical University of Grydin, Leibniz University Hannover Freiberg (Germany); F. Wunderlich, (Germany); E. Tekkaya, A. Brosius, H. Stöcker, M. Zschomak, R. T. Cwiekala, B. Svendsen, Boucher, Technische Universität University of Dortmund (Germany) Dresden (Germany) et al. et al.

22 In Situ Laue Micro-Diffraction Voreinstellung für den Datenimport Wednesday am2 Symposium: B2 Symposium: B6 Symposium: C1 Room: A5 Room: A03 Room: A04 Modern Steels Mechanical Properties and Nanomaterials and Microstructure Composites

TRIP/TWIP Steels Brittle Materials Nano 5 Parallelen im Layout: links mitte rechts

H. Biermann, TU Bergakademie C. Müller, Technische Universität K.-H. Haas, Fraunhofer Institut für Freiberg (Germany) Darmstadt (Germany) Silicatforschung, Würzburg (Germany) Strain-Hardening Mechanical Properties of Keynote Lecture 10:40 Mechanisms in Austenitic Laves Phases in the Systems Polysiloxane Derived Hybrid TWIP Steels Fe-Nb(-Al) and Co-Nb(-Al) Ceramics for Catalytic K. Renard (Sp), H. Idrissi, D. Using Polycrystalline, Applications Schryvers, P.J. Jacques, Université Single-Phase Material M. Adam (Sp), M. Wilhelm, M. catholique de Louvain, S. Voss (Sp), F. Stein, M. Palm, D. Bäumer, G. Grathwohl, University of Louvain-la-Neuve (Belgium) Raabe, Max-Planck-Institut für Bremen (Germany) Eisenforschung GmbH, Düsseldorf (Germany) In-Situ Observation of Hydrogen Effusion Structure Formation in Colloidal Thin

Transformation-Induced Microstructure and 11:00 Plasticity in Fe-Cr-V-C Mechanical Behaviour of J. Hufenbach (Sp), H. Wendrock, N. Mo-Si-B Alloys Fabricated Mattern, J. Eckert, U. Kühn, Leibniz by Different Processing Institute for Solid State and Materials Routes Research Dresden (Germany) M. Krüger (Sp), Otto-von-Guericke-University Magdeburg (Germany); H. Saage, University of Applied Sciences, Landshut (Germany); M. Heilmaier, Technical UniversityDarmstadt (Germany); H. Kestler, Plansee SE,

Temperature Dependence of Mechanical and Thermal Synthesis and Analysis of 11:20 the Mechanical Properties of Properties of Cr-Doped TiO2-Nanotubular High Alloyed CrMnNi Copper-Alumina Sensor Electrodes as-Cast Steels Interpenetrating Composites Y. Goenuellue (Sp), A. Yüce, G.C. A. Jahn (Sp), A. Kovalev, A. Weiß, J.S. Winzer (Sp), L. Weiler, V. Salit, Mondragón-Rodriguez, B. Saruhan, P.R. Scheller, Technical University of D. Gross, J.R. Rödel, Technische German Aerospace Center, Köln Freiberg (Germany); S. Wolf, L. Universität Darmstadt (Germany) (Germany) Krüger, S. Martin, U. Martin, Institute of Materials Testing, Freiberg (Germany) Transformation-Indu ced Plasticity in

Characterization of Prediction of Mechanical From Lab to Market – 11:40 TRIP/TWIP Effect in Properties of Ceramics by Coloured and Transparent Austenitic Steels Using Quantitative Microstructure Sol-Gel Coatings Stress-Temperature-Transfor Analysis C.L. Schmidt (Sp), K. Endres, M. mation(STT) and T. Bernthaler (Sp), A. Nagel, G. Menning, H. Schmidt, EPG AG, Deformation-Temperature(D Schneider, Aalen University Zweibrücken (Germany) T) Diagrams (Germany); M. Hoffman, University A. Kovalev (Sp), A. Jahn, S. Wolf, of New South Wales, Sydney A. Weiß, P.R. Scheller, Technical (Australia) University of Freiberg (Germany)

Design of Lean Maraging Formation of Nanostructures Oral Poster - Subsession 12:00 TRIP Steels in Brittle Materials with Poster 1: C1-358 D. Ponge (Sp), J. Millán, O. Transformations Poster 2: C1-203 Dmitrieva, D. Raabe, Max Planck S. Kulkov, Tomsk State University Poster 3: C1-464 Institute for Iron Research GmbH, (Russian Federation) Düsseldorf (Germany)

23 In Situ Laue Micro-Diffraction Voreinstellung für den Datenimport pm1 Wednesday Symposium: D3 Symposium: D2 Symposium: E2 Symposium: F1 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material New Techniques Materials Processing Bio-Inspiration Properties

In situ-Methods in Mechanical Combined and In-Situ Testing II Heat Treatment / Quenching Surfaces and Structures Parallelen im Layout: links Materials Testing mitte rechts

A. Weidner, TU Bergakademie C. Hébert, Ecole Polytechnique M. Schaper, Leibniz Universität T. Scheibel, Universität Bayreuth Freiberg (Germany) Fédérale de Lausanne (Switzerland) Hannover, Garbsen (Germany) (Germany)

14:30 Comparison of Electron Tomography and Keynote Lecture Biomimetic Structure Microscopical and Analytical (S)TEM as a Tool From Concepts to Process Formation Based on Macroscopical Residual to Characterize the Porosity Simulation : Example of Wrinkling Stresses in Slightly and Wetting Behavior in Heat Treatment of Metallic A. Schweikart, University of Tensile-Deformed TWIP Model Systems for Alloys Bayreuth (Germany); K. Koch, Steels. Hydrogen Storage S. Denis, Ecole de Mines, Nancy Rhine-Waal University of Applied T. Jäpel (Sp), S. Zaefferer, M. C. Kübel (Sp), A. Roth, D. Wang, Z. Cedex (France) Science, Kleeve (Germany); N. Pazos Winning, D. Raabe, Max Planck Zhao karger, M. Fichtner, Karlsruher Perez, A. Fery (Sp), University of Institute of Iron Research GmbH, Institut für Technologie (KIT), Bayreuth (Germany) In Situ Reduction Düsseldorf (Germany) Eggenstein-Leopoldshafen and Reoxidation of a (Germany) The Effect of Dopants on the Local

14:50 Evolution of Microstructure In Situ Reduction and Bioinspired Engineering of and Deformation fFelds Reoxidation of a Solid Oxide Self Repairing Pneumatic Accompanied by Fuel Cell Anode in an Membranes Martensitic Phase Environmental TEM M. Rampf (Sp), R. Luchsinger, Transformation in Novel Q. Jeangros, A. Faes, Ecole EMPA, Dübendorf (Switzerland); T. High Alloyed TRIP Steel Polytechnique Fédérale de Lausanne Speck, O. Speck, University of A. Weidner (Sp), H. Biermann, (Switzerland); J.B. Wagner, T.W. Freiburg (Germany) Technical University of Freiberg hansen, Technical University of (Germany) Denmark, Lyngby (Denmark); U. Aschauer, Princeton University (USA) et al.

15:10 3D In-Situ Observations of The Effect of Dopants on the Coupled Gas and Workpiece Relation of Ultrastructure Fatigue Crack Propagation Local Atomic Structure and Simulation of High Pressure and Optical Properties in the in a Grain-Mapped the Sintering Behavior of Gas Quenching of Steel Cuticle of Beetles Magnesium Alloy Bismuth Sodium Titanate Parts X. Wu (Sp), A. Erbe, H. Fabritius, D. Polycrystal V. Schmitt, T. Staab (Sp), M. Hunkel (Sp), S. Schüttenberg, U. Raabe, Max Planck Institute for Iron A. King (Sp), N. Schell, A. Schreyer, Fraunhofer Institute for Silicate Fritsching, F. Hoffmann, Stiftung Research GmbH, Düsseldorf GKSS, Hamburg (Germany); W. Research, Würzburg (Germany); E. Institut für Werkstofftechnik, Bremen (Germany) Ludwig, ESRF, Grenoble and Dudzik, Helmholtz-Zentrum BESSY, (Germany) MATEIS, Villeurbanne (France); J.Y. Berlin (Germany) Buffiere, INSA de Lyon, Villeurbanne (France) et al.

15:30 In Situ Mechanical Testing of Linking Grain Boundaries Simulation Studies of the Branched Fibre Compound Creep Resistant Bainitic Steel and Grain Growth in Development of Structures Inspired by Using Synchrotron and Ceramics Compressive Residual Columnar Cacti Neutron Diffraction M. Bäurer (Sp), M.J. Hoffmann, Stresses by High-Speed H. Schwager (Sp), C. Neinhuis, M. Weisser (Sp), A. Evans, S. Van Technical University of Karlsruhe Water Quenching Technische Universität Dresden Petegem, Paul Scherrer Institut, (Germany) J. Rath (Sp), T. Lübben, F. (Germany) Villigen (Switzerland); S.R. Hoffmann, H.-W. Zoch, IWT Bremen Holdsworth, EMPA Materials Science (Germany) & Technology, Dübendorf (Switzerland) et al.

15:50 Oral Poster - Subsession Cathodoluminescence-Based Quenching Simulation of Slipping Through the Water: Poster 1: D3-414 Analysis of ZrO2-bearing Aluminium Alloys Including Biological Under Water Air Poster 2: D3-116 Materials Mechanical Properties of Retaining Surfaces as a Poster 3: D3-132 Y. Hemberger (Sp), M. Keuper, C. Undercooled States Biomimetic Approach to Poster 4: D3-583 Kohler, C. Berthold, K.G. Nickel, O. Keßler (Sp), M. Reich, University Drag Reduction Poster 5: D3-59 Applied Mineralogy, Tübingen of Rostock (Germany) M. Mayser (Sp), P. Ditsche-Kuru, (Germany) University of Bonn (Germany); M. Brede, A. Leder, University of Rostock (Germany); T. Schimmel, University of Karlruhe, Karlsruhe (Germany); W. Barthlott, University of Bonn (Germany)

24 Linking Grain Boundaries and Voreinstellung für den Datenimport Wednesday pm1 Symposium: B1 Symposium: B4 Symposium: C3 Room: A5 Room: A03 Room: A04 Intermetallic Aluminides: Functional Amorphous Joining Physical Metallurgy and Materials and Glasses Processing Iron and Exotic Aluminides Functional Glasses Friction Stir Welding Parallelen im Layout: links mitte rechts

F. Appel, GKSS-Forschungszentrum J. Roether, C. Sommitsch, Technische Geesthacht GmbH (Germany) Friedrich-Alexander-Universität Universität Graz (Austria) Erlangen-Nürnberg (Germany) Keynote Lecture Subwavelength Scale Devices Keynote Lecture 14:30 Ductility of Cast Based on Glass Filled In-Situ Investigation of Microstructurally-Refined Photonic Crystal fibers Friction Stir Welding Using TiAl-Based Alloys M. Schmidt (Sp), N. Granzow, N. High Energy Synchrotron M.H. Loretto, University of Da, L. Wondraczek, P.S.J. Russel, Radiation Birmingham (UK) Max Planck Institute for the Science T. Fischer (Sp), P. Staron, L. of Light, Erlangen (Germany) Bergmann, GKSS Research Centre, Hamburg (Germany); H. Loitz, Helmut-Schmidt-University Hamburg (Germany); J.F. dos Santos, A. In Situ Reduction and Reoxidation of a Schreyer, GKSS Research Centre, The Effect of Hamburg (Germany) Dopants on the Local

Precious Metal 14:50 Functionalized Soda-Lime SIlicate Glasses A. Simo (Sp), K. Rademann, Humboldt-University of Berlin (Germany)

Hot Rolling of B2-Based Iron FORGLAS: Multifunctional Mechanical Properties of 15:10 Aluminides Glass Based Materials for Friction Stir Welded J. Kopecek (Sp), M. Jarosová, Energy Efficient Buildings Mg/Mg- and Mg/Al-Joints Academy of Sciences, Prag (Czech T. Gerdes, M. Willert-Porada (Sp), O.M. Klag (Sp), G. Wagner, D. Eifler, Republic); P. Hanus, Technical University of Bayreuth (Germany); University of Kaiserslautern University of Ostrava (Czech S. Trassl, Sigmund Lindner GmbH, (Germany) Republic); V. Yíma, P. Kratochvíl, Warmensteinach (Germany) Charles University, Prag (Czech Republic) et al.

Tau6-Ti2(Ti0.22Ni0.43Al0.35 Criteria for Tensile Plasticity 1 Effect of process 15:30 )3, a Novel Phase in the in Cu-Zr-Al Bulk Metallic parameters on Weld Area Ti-Rich Part of the Phase Glasses and Defect Formation in Diagram: Crystal Structure S. Pauly (Sp), G. Liu, U. Kühn, D.H. Friction Stir Welded AA5083 and Phase Equilibria Kim, J. Eckert, Leibniz Institute for K.S. Arora, Technische Universität A.U. Khan (Sp), X. Yan, A. Grytsiv, Solid State and Materials Research Dresden (Germany); R. Kumar, S. P. Rogl, University of Vienna Dresden (Germany) Pandey, Indian Institute of (Austria); A. Saccone, University of Technology, Dehli (India); M.K. Genova (Italy) Schaper (Sp), Technische Universität Dresden (Germany)

Highlight Lecture Linear Friction Welding of 15:50 Dissimilar Materials I. Bhamji (Sp), M. Preuss, University of Manchester (UK); P.L. Threadgrill, A. Addison, TWI Ltd, Cambride (UK); R.J. Moat, University of Manchester (UK)

25 Linking Grain Boundaries and Voreinstellung für den Datenimport pm2 Wednesday Symposium: D3 Symposium: D2 Symposium: E2 Symposium: F1 Room: A1 Room: A2 Room: A3 Room: A4 Characterisation of Material New Techniques Materials Processing Bio-Inspiration Properties

Mechanical Properties of Structural Advanced Methods Physical Models Hierarchies and Materials Analysis Parallelen im Layout: links Materials mitte rechts

H. Biermann, TU Bergakademie J. Neuhaus, Technische Universität M. Hunkel, Stiftung Institut für C. Zollfrank, Freiberg (Germany) München, Garching (Germany) Werkstofftechnik, Bremen Friedrich-Alexander-Universität (Germany) Erlangen-Nürnberg (Germany) 16:40 The Effect of Alloying Micro and Nano Simulation of Particle Self-Reporting Polymeric Elements on The Phase Tomography at the Imaging Evolution for Microalloyed Materials that Visually Transformation and Beamline at PETRA III Case Hardening Steels Report Damage with the Mechanical Properties of A. Haibel (Sp), F. Beckmann, T. Along the Process Chain Help of Proteins Low Nickel Cobalt Free Dose, M. Ogurreck, F. Wilde, D. S. Konovalov (Sp), U. Prahl, W. N. Bruns (Sp), S. Lörcher, University Maraging Steel Laipple, J. Herzen, M. Müller, A. Bleck, RWTH Aachen University of Basel (Switzerland) A. El-Aziz, German University in Schreyer, GKSS Research Centre, (Germany) Cairo (Egypt); A.M. Fathy, Central of Geesthacht (Germany) Metallurgical Research and Progress in Deveopment Institute, Helwan 3-Dimensional (Egypt); A. Hassan (Sp), German Neutron Larmor University in Cairo (Egypt) Diffraction

17:00 Mechanical Properties of Progress in 3-Dimensional Computational Plant Ramifications as Role Matching and Dissimilar EBSD-Based Orientation Thermodynamics in the Models for Branched Joints in Aluminium Alloys Microscopy: New Software Context of High-Temperature Biomimetic Fibre-Reinforced 5083-H111 and 6061-T651 Tools for 3-Dimensional Oxidation of Co-Re-Based Composites Welded Using Fully materials characterization Alloys T. Haushahn (Sp), T. Masselter, T. Automatic Pulsed GMAW S. Zaefferer (Sp), P. Konijnenberg, E. B. Gorr (Sp), H.-J. Christ, University Speck, University of Freiburg K. Mutombo, Unversity of Pretoria Demir, Max Planck Institute for Iron of Siegen (Germany) (Germany) (South Africa) Research GmbH, Düsseldorf (Germany); T. Woodcock, Institute for Materials Science Dresden (Germany)

17:20 Microstructural Evolution of Neutron Larmor Diffraction Fast Simulation of Pummelo-inspired Low Titanium Base Materials Investigations for Materials Inhomogeneous Material Weight Structures with during Hot Deformation Science Evolution in Hot and Cold Excellent Damping F. Warchomicka (Sp), C. Poletti, J. Repper (Sp), Technical University Rolling of Flat Products Properties Vienna University of Technology of Munich, Garching (Germany); T. M. Schmidtchen (Sp), M. Graf, R. S. Fischer (Sp), RWTH Aachen (Austria); M. Stockinger, Boehler Keller, Max Planck Institute for Solid Kawalla, Technical University of University (Germany); R.R. Loprang, Schmiedetechnik GmbH & Co KG, State Research, Stuttgart (Germany) Freiberg (Germany) C. Fleck, TU Berlin (Germany); A. Kapfenberg (Austria); H.P. Degischer, et al. Bührig-Polaczek, RWTH Aachen Vienna University of Technology University (Germany) (Austria) Directional Solidification of

17:40 Characterisation of the Precise Neutron Strain Investigation of the Scaling Adaptation of the Spongy Fatigue Behaviour of the Imaging Behavior of Surface near Architecture of Trabecular Cast Irons EN-GJL-250, EN- T. Pirling, Institut Laue-Langevin, Residual Stresses for the Bone GJV-400 and EN- GJS-600 Grenoble (France) Micro-Cutting Process H. Scherf, University of Tübingen H. Germann (Sp), P. Starke, E. H. Autenrieth (Sp), M. Deuchert, J. (Germany); J.W.C. Dunlop, P. Kerscher, D. Eifler, University of Hoffmeister, Karlsruhe Institute of Saparin, M. Rusconi, A. Valeriani, Kaiserslautern (Germany) Technology (Germany); V. Schulze, Max Planck Institute of Colloids and Institute of Materials Science and Interfaces, Potsdam (Germany) et al. Engineering , Karlsruhe Institute of Technology (Germany)

18:00 Oral Poster - Subsession Martensite Formation of The Unfolding Mechanism Poster 1: D3-300 Metastable Austenitic of Seed Capsules in Desert Poster 2: D3-146 Stainless Steels during a Two Ice Plants Poster 3: D3-210 Directional Forming Process M. Harrington, K. Razghandi, Max Poster 4: D3-683 and its Effect on Monotonic Planck Institute of Colloids and Poster 5: D3-45 and Cyclic Mechanical Interfaces, Potsdam (Germany); F. Properties Ditsch, Technische Universität C. Müller-Bollenhagen (Sp), M. Dresden (Germany); P. Fratzl, Max Zimmermann, H.-J. Christ, Planck Institute of Colloids and University of Siegen (Germany) Interfaces, Potsdam (Germany) et al.

26 Precise Neutron Strain Imaging Voreinstellung für den Datenimport Wednesday pm2 Symposium: B1 Symposium: B4 Symposium: C3 Room: A5 Room: A03 Room: A04 Intermetallic Aluminides: Functional Amorphous Joining Physical Metallurgy and Materials and Glasses Processing

Microstructural Evolution Rheology, Sintering and Sealing Friction Welding and Simulation in Parallelen im Layout: links Welding mitte rechts

M. Oehring, J. Roether, U. Reisgen, RWTH Aachen (Germany) GKSS-Forschungszentrum Geesthacht Friedrich-Alexander-Universität GmbH (Germany) Erlangen-Nürnberg (Germany) In Situ Grain Refinement of The Temperature Tool Analysis for Friction Stir 16:40 TiAl-Based Alloys by Boron Dependence of the Viscosity Spot Welding (FSSW) Additions of Glass-Forming Melts - a Process – A Theoretical U. Hecht (Sp), V. Witusiewicz, J. Comparison of Five Different Study Eiken, M. Apel, ACCESS e.V., Aachen Models F. Krumphals (Sp), T. Weinberger, (Germany) R. Conradt, RWTH Aachen University N. Enzinger, F. krumphals, C. (Germany) Sommitsch, Technical University of Graz (Austria) Progress in 3-Dimensional Neutron Larmor Diffraction

Directional Solidification of Development of New Glass Functional Interlayers for 17:00 NiAl-9Mo at.-% Alloy and Systems Using a Assembly Moulding of Adjustment of the High-Throughput Glass Durable Solidification Front in a High Screening Apparatus Multi-Material-Systems Temperature-Gradient M. Kilo (Sp), B. Durschang, A. M. Vetter (Sp), C. Heinle, University Bridgman-Furnace Diegeler, F. Raether, Fraunhofer of Erlangen-Nürrnberg (Germany); S. S. Bogner (Sp), H. Lei, A. Institute for Chemical Technology, Amesöder, RF-Plast, Gunzenhausen Bührig-Polaczek, RWTH Aachen Würzburg (Germany) (Germany); D. Drummer, University University (Germany) of Erlangen-Nürnberg (Germany)

Shear Localization and Glass Sealing Materials and Simulation of the 17:20 Cracking during Laser Joining Process for the Microstructure Evolution in Hot-Working of Fuel Cell Stack the HAZ of Welded Dual Gamma-Based Titanium Manufacturing Phase Steel Aluminides D. Faidel (Sp), S. Groß, W. Behr, U. Prahl (Sp), K. Mukherjee, W. U. Froebel, GKSS Research Centre, Forschungszentrum Jülich GmbH Bleck, U. Reisgen, M. Schleser, A. Geesthacht (Germany) (Germany); U. Reisgen, RWTH Abdurakhmanov, RWTH Aachen Aachen University (Germany) University (Germany)

Directional Solidification of

Effect of Coherency Stresses Developing Glass Solders for Concept of Controlling the 17:40 and Elastic/Plastic Laser-Induced Soldering of Welding Technology Based Incompatibilities on Crack Ceramic Materials on Simulating Models Formation in Lamellar A. Kasper (Sp), H. Vor, A. Prange, R. M. Markovic (Sp), N. Kosanin, M. TiAl-Alloys Conradt, RWTH Aachen University Bjelic, M. Vukicevic, University of F. Iqbal (Sp), University of (Germany) Kragujevac, Kraljevo (Serbia) Erlangen-Nürnberg (Germany); F. Pyczak, GKSS Research Centre Geesthacht GmbH (Germany); M. Göken, University of Erlangen-Nürnberg (Germany)

Fatigue Mechanisms in TiAl Densification of 45S5 18:00 G. Hénaff, ENSMA, Chasseneuil Bioglass® Powder for Futuroscope (France) Fabrication of Tissue Scaffolds: Viscous Flow Sintering and Crystallisation Phenomena A.R. Boccaccini (Sp), University of Erlangen-Nürnberg (Germany); X. Chatzistavrou, Imperial College London (UK); L. Wondraczek, University of Erlangen-Nürnberg (Germany); O. Bretcanu, Polytechnic of Turin (Italy) et al.

27 Precise Neutron Strain Imaging Voreinstellung für den Datenimport am1 Thursday Symposium: B3 Symposium: D1 Symposium: C4 Symposium: F3 Room: A1 Room: A2 Room: A3 Room: A4 Refractory Materials Microstructure Additive Manufacturing and Interfaces Characterisation Field Assisted Sintering Techniques Refractory Materials Thin Films FAST Materials Surface and Cell Interactions Parallelen im Layout: links mitte rechts

C. Aneziris, TU Bergakademie D. Rafaja, TU Bergakademie Freiberg J. Groza, University of California, M. große Holthaus, Universität Freiberg (Germany) (Germany) Berkeley (USA) Bremen (Germany)

09:15 Influence of Nanoscaled Applications of Block Highlight Lecture Keynote Lecture Additives on the Properties Copolymers: Membranes Bulk Undoped Engineered Polymer of Carbon Bonded through Self-Assembly Nanocrystalline Tetragonal Matrices to Aid Stem Cell Refractories A. Boschetti-de-Fierro (Sp), D. Fierro, Zirconia Obtained by Based Therapies V. Roungos (Sp), C.G. Aneziris, TU K. Buhr, C. Abetz, V. Abetz, GKSS High-Pressure Field Assisted C. Werner, Leibniz Institute of Bergakademie Freiberg (Germany) Research Centre, Geesthacht Rapid Sintering Polymer Research Dresden (Germany) I. Tredici, A. Zeffiro, F. Maglia, (Germany) University of Pavia (Italy); M. Dapiaggi, Univerity of Milan (Italy); U. Anselmi-Tamburini (Sp), 3D Electron Tomography of University of Pavia (Italy) In-Situ Thin Film and Nano Structure

09:35 Studies on the 3D Electron Tomography of Shape and Size Factors in Decarburization of the Functional Nanocomposite Conventional (SPS) and Free Commercial Submerged Thin Films Pressureless (FPSPS) Entry Nozzles (SEN) V.S.K. Chakravadhanula (Sp), A. Spark-Plasma Sintering A. Memarpour (Sp), V. Brabie, Lotnyk, T. Hrkac, A. Kulkami, T. E. Olevsky (Sp), C. Garcia, E. Dalarna University, Borlänge Strunskus, V. Zaporojtchenko, Khaleghi, W. Bradbury, W. Li, R. (Sweden); P. Jönsson, Royal Christian-Albrechts-University of Kiel German, San Diego State University Institute of Technology, Stockholm (Germany); C. Kuebel, Karlsruhe (USA) (Sweden) Institute of Technology, Eggenstein-Leopoldshafen

09:55 A Continuum Damage In-Situ Thin Film and Nano Electric Field Assisted How Does Topography Model for Ceramic Materials Structure Characterizations Sintering of Semiconductor influence Cellular Behavior? Under thermal Shock at ROBL Zinc Oxide – Screening with High Loading Conditions C. Baehtz (Sp), N. Jeutter, J. Grenzer, O. Guillon (Sp), Technische Volume Manufactured D. Henneberg (Sp), A. Ricoeur, J.V. Borany, Research Center Universität Darmstadt (Germany); Substrates University of Kassel (Germany) Dresden-Rossendorf (Germany) M.J. Hoffmann, Karlsruhe Institute of P. Kluger (Sp), Fraunhofer Institute Technolgy (Germany); O. Guillon, for Interfacial Engineering and Technische Universität Darmstadt Biotechnology, Stuttgart (Germany); (Germany) F. Petzsch, Fraunhofer Institute for Production Technology IPT, Aachen (Germany) et al. Ab Initio Interfacial Austenite/Martensite

10:15 Crack Propagation in Novel Growth Kinetics and Determination of the Nano-Mechanical and Alumina-Based Refractories Mechanisms of Ultrathin Thermal and Athermal Morphological E. Skiera (Sp), J. Malzbender, Zr-Oxide Films formed by Densification Mechanisms characterization of Novel Silk Research Centre Juelich, Jülich Thermal Oxidation of of Sintering Using Varied Protein Layers (Germany); J. Mönch, Single-Crystalline Zr Surfaces Heating Rates With and F. Junghans, M. Menzel, U. Hirsch, Forschungszentrum Jülich GmbH G. Bakradze (Sp), L.P.H. Jeurgens, Without an Applied Field W. Hauptmann, U. Conrad, A. (Germany); S. Dudczig, C.G. E.J. Mittemeijer, Max Planck T. Holland (Sp), T. Tran, J. Groza, Heilmann, U. Spohn (Sp), Aneziris, Technical University of Institute for Metals Research, University of California, Davis Fraunhofer Institute for Mechanics of Freiberg (Germany) et al. Stuttgart (Germany) (USA); U. Anselmi-Tamburini, Materials, Halle (Germany) Universita' di Pavia (Italy); A. Mukherjee, University of California, Davis (USA)

10:35 Self-Flow Carbon-Free Influence of the Deposition Spark Plasma Sintering and Cell Architecture-Cell Magnesia Castable Pore Current on the Conductivity Measurements Function Dependencies on Structure Engineering Microstructure and the GMR of a Mixed Conductive Micro-Arrays with Cubic W.M. Silva (Sp), Magnesita Properties of Ceramic, YZrTiO Pillar Structures Refratários S.A., Contagem (Brazil); Electrodeposited Co/Cu L. Ramond (Sp), G. Bernard-Granger, C. Matschegewski, S. Staehlke, S. Dudczig, C. Aneziris, Multilayers A. Princivalle, C. Guizard, University of Rostock (Germany); R. TU-Bergakademie Freiberg T. Schucknecht (Sp), C. Schimpf, V. Saint-Gobain CREE, Cavaillon Loeffler, University of Tübingen (Germany); L.R.M. Bittencourt, Klemm, D. Rafaja, Technical (France) (Germany); R. Lange, University of Magnesita Refratários S.A., University of Freiberg (Germany); L. Rostock (Germany) et al. Contagem (Brazil) Péter, Hungarian Academy of Science, Budapest (Hungary)

28 Growth Kinetics and Mechanisms of Voreinstellung für den Datenimport Thursday am1 Symposium: B5 Symposium: B1 Symposium: C3 Room: A5 Room: A03 Room: A04 New Methods in Materials Intermetallic Aluminides: Joining Design Physical Metallurgy and Processing

Modelling Methods Alloy Design and Processing Microstructure and Mechanical Parallelen im Layout: links Properties of Welds mitte rechts

H.-J. Hoffmann, Technische F. Appel, GKSS-Forschungszentrum U. Prahl, RWTH Aachen (Germany) Universität Berlin (Germany) Geesthacht GmbH (Germany)

Ordering Principles and Microstructure and Characteristics of the 09:15 Stabilities in Mechanical Properties of Mechanical Property in the Manganese-Rich Steels Beta-Solidifying TNM-Based 800 MPa Grade Weld Metal J. von Appen (Sp), B. Eck, R. Alloys: Further Alloy According to Microstructure Dronskowski, RWTH Aachen Composition and Heat J. Lee (Sp), S. Kim, Hanyang University (Germany) Treatment Improvements University, Seoul (Korea, Republic); V. Imayev (Sp), R.M. Imayev, T. B. Yoon, Research Institute of Oleneva, T. Khismatullin, Russian Industrial Science and Technology, Academy of Science, Ufa (Russian Gyeongbuk (Korea, Republic); H. 3D Electron Federation); R. Gaisin, V. Günther, Jung, POSCO Technical Research, Tomography of GfE Metalle und Materialien GmbH, Gyeongbuk (Korea, Republic) et al. In-Situ Thin Film Nürnberg (Germany) and Nano Structure

Ab Initio Interfacial Microstructural Refinement Arc Joining of 09:35 Austenite/Martensite of Cast Beta-Solidifying Steel-Aluminium-Tailored-Hy Energies for Accurate Gamma Titanium brid-Blanks Deformation Mechanism Aluminide Alloys M. Steiners (Sp), U. Reisgen, L. Maps in High-Mn Steels M. Oehring (Sp), A. Stark, J. Paul, Stein, RWTH Aachen University A. Dick (Sp), T. Hickel, J. S. Eggert, F. Pyczak, GKSS Research (Germany) Neugebauer, Max Planck-Institute Centre, Geesthacht (Germany) for Iron Research GmbH, Düsseldorf (Germany)

The Thermodynamics of Development of a Corrosion Behaviors of 09:55 Fe-Based Compounds Centrifugal Investment Titanium/Steel Brazed Joints Derived From First Principles Casting Technology for Produced by Silver-Based T. Hickel (Sp), F. Körmann, A. Dick, Manufacturing of Titanium Filler Metal J. Neugebauer, Max Planck Institute Aluminide Low Pressure A. Elrefaey (Sp), L. Wojarski, W. for Iron Research GmbH, Düsseldorf Turbine Blades Tillmann, University of Dortmund (Germany) O. Kättlitz (Sp), J. Aguilar, Access (Germany) e.V., Aachen (Germany)

Ab Initio Interfacial Austenite/Martensite

Grain Boundary Migration Up-Scalin Gamma TiAl Impact of Technologically 10:15 by Molecular-Dynamics Component Size – a Novel Generated Hardphase Simulation Solution Degradation on the Wear J. Zhou (Sp), V. Mohles, G. J.D.H. Paul (Sp), U. Lorenz, M. Behaviour of an MMC Gottstein, RWTH Aachen University Oehring, F. Appel, GKSS Research C. Katsich (Sp), E. Badisch, AC2T (Germany) Centre, Geesthacht (Germany) Research GmbH, Wiener Neustadt (Austria)

Dislocation Density-Based ECAP of NiAl Self-Brazing 10:35 Constitutive Model for TWIP W. Skrotzki (Sp), R. Chulist, B. Aluminium-Clad Steel Steel Beausir, Technische Universität M. Ostafin (Sp), M. Balkenhol, J. D. Steinmetz (Sp), P. Eisenlohr, F. Dresden (Germany); M. Hockauf, Erlemeyer, M. Köhler, Wickeder Roters, Max Planck Institute for Iron Technical University of Chemnitz Westfalenstahl GmbH (Germany) Research, Duesseldorf (Germany) (Germany)

29 Growth Kinetics and Mechanisms of Voreinstellung für den Datenimport am2 Thursday Symposium: B3 Symposium: D1 Symposium: C4 Symposium: F3 Room: A1 Room: A2 Room: A3 Room: A4 Refractory Materials Microstructure Additive Manufacturing and Interfaces Characterisation Field Assisted Sintering Techniques

Refractory Materials Interfaces and Nanocomposites FAST/Additive Manufacturing Smart Approaches to Biomaterials Parallelen im Layout: links Design mitte rechts

P. Quirmbach, Deutsches Institut für C. Baehtz, Forschungszentrum J. Stampfl, Technische Universität T. Keller, Feuerfest und Keramik GmbH, Bonn Dresden-Rossendorf e.V. (Germany) Wien (Austria) Friedrich-Schiller-Universität Jena (Germany) (Germany) 11:20 Tape Casting of Refractory The Hierarchical Keynote Lecture Highlight Lecture Oxides and Manufacture of Microstructure of the Benefits and Challenges Radiation-Functionalisation Multilayer Structures Interface Region Formed Related to Sintering upon Surfaces for Taylored I. Götschel (Sp), University of during Explosion Joining of External and Internal Cell-Biomaterial Interaction Erlangen-Nürnberg (Germany); Y. Ti to Low Carbon Steel Electromagnetic Field G. Marletta, University of Catania Hayashi, Nagoya Institute of J. Song (Sp), A. Kostka, D. Raabe, Assistance (Italy) Technology, (Japan); A. Roosen, Max Planck Institute for Iron M. Willert-Porada, University of University of Erlangen-Nürnberg Research GmbH, Düsseldorf Bayreuth (Germany) (Germany) (Germany); M. Veehmayer, Dynamic Internal Stresses Materials Corporation GmbH, and Thermal Fatigue Burbach (Germany) Three-Dimensional Atom Probe

11:40 Novel Alumina-Mullite Internal Stresses and Fabrication of Open Porous Materials for Refractory Thermal Fatigue Damage in Calcium Phosphate/Protein Applications Monofilament Reinforced Scaffolds in a V.K. Atanga (Sp), Copper Composites for One-Step-Process Otto-von-Guericke-University of Fusion Reactor Applications B. Müller (Sp), L. Treccani, R. Magdeburg (Germany); V. Wilker, M. Schöbel (Sp), H.P. Degischer, Rezwan, University of Bremen M. Michailov, M. Wolf, Vienna University of Technology (Germany) Brandenburg University of (Austria); V. Paffenholz, IPP Technology, Cottbus (Germany); M. Garching (Germany); R. Wimpory, Scheffler, HZB Wannsee (Germany); M. Di Michiel, ESRF Grenoble (France)

12:00 Hydrogen Corrosion of Three-Dimensional Atom Field-Assisted Sintering of Synthesis and Shaped Refractories: an Probe Characterization of Nanometric Particles in the Characterization of Iron Approach for Estimation of Nano-Sized Precipitates in a Transmission Electron Oxide Nanoparticles and Service Life from Lab Scale Mn-Containing Lean Microscope Investigation of their Uptake Trials Maraging Steel T. Holland (Sp), A.M. Thron, A.K. by Cultured Brain Astrocytes A. Sax (Sp), University of J. Millán (Sp), D. Ponge, P. Choi, Mukherjee, K. van Benthem, M. Hohnholt (Sp), M. Geppert, Koblenz-Landau (Germany); S. O. Dimitrieva, D. Raabe, Max Planck University of California, Davis (USA) University of Bremen (Germany); K. Clasen, Forschungsgemeinschaft Institute for Iron Research GmbH, Thiel, I. Grunwald, Fraunhofer Feuerfeste e.V., Bonn (Germany); P. Düsseldorf (Germany) Institute for Manufacturing Quirmbach, University of Technology and Applied Materials Koblenz-Landau (Germany) Research, Bremen (Germany); J. von Byern, University of Vienna Forming of Two High-Manganese

12:20 Microstructure Analysis of Diffusion of Hafnium in Effect of Microwave Heating Wettability of Plant Surfaces Tungsten Materials SiCO/Hafnia on Initial Stage of and Their Underlying Produced by Different Nanocomposites Triggered Microwave Sintering for Surface Sculptures Fabrication Routes by the Phase Separation Metals K. Koch, Rhine-Waal University of T. Scherer, U. Jäntsch, Karlsruhe Process of SiCO D. Demirkyi (Sp), Frantsevich Applied Sciences, Kleve (Germany) Institute of Technology (Germany); K. Nonnenmacher (Sp), H.-J. Kleebe, Institute for Problems in Material C. Kübel (Sp), Karlsruher Institute of Technische Universität Darmstadt Science, Kiev (Ukraine); D. Agrawal, Technology, (Germany) The Pennsylvania State University Eggenstein-Leopoldshafen (USA); A. Ragulya, Frantsevich (Germany); M. Rieth, Karlsruhe Institute for Problems in Material Institute of Technology (Germany) Science, Kiev (Ukraine)

12:40 Fracture and Brittle-to-Ductile On the Formation of Influence of Shaped Metal Transition in Tungsten Single Intermetallic Phases during Deposition Parameters on and Polycrystals Interdiffusion Reactions the Morphology and A. Hartmaier (Sp), X.H. Zeng, between Low Carbon Steel Mechanic Properties of Ruhr-University Bochum (Germany); and Aluminium Alloys Ti-6Al-4V Components D. Rupp, S.M. Weygand, Karlsruher H. Springer (Sp), A. Kosta, Max B. Baufeld (Sp), Catholic University Institute of Technology (Germany) Planck Institute for Iron Research of Leuven (Belgium); R. Gault, GmbH, Düsseldorf (Germany); E.J. University of Sheffield (UK); O. van Payton, Ruhr University of Bochum der Biest, Catholic University of (Germany); D. Raabe, Max Planck Leuven (Belgium) Institute for Iron Research GmbH, Düsseldorf (Germany) et al.

30 Diffusion of Hafnium in SiCO/Hafnia Voreinstellung für den Datenimport Thursday am2 Symposium: B5 Symposium: B1 Symposium: C3 Room: A5 Room: A03 Room: A04 New Methods in Materials Intermetallic Aluminides: Joining Design Physical Metallurgy and Processing

Materials Processing Characterisation Electron Beam Welding, Resistance Parallelen im Layout: links Spot Welding and Residual Stresses mitte rechts

W. Bleck, RWTH Aachen (Germany) M. Loretto, University of Birmingham J. Ellermeier, Technische Universität (UK) Darmstadt (Germany)

Smelting and Solidification In-Situ Characterization of Analysis of Warpage 11:20 of Steels in the System Phase Transformations and Caused by Electron Beam Fe-Mn-C Thermo-Mechanical Welding of Large D. Senk (Sp), A. Lob, RWTH Aachen Processing in Titanium Components University (Germany) Aluminium Alloys G. Fischer (Sp), T. Krüssel, K.-D. Liss (Sp), Australian Nuclear pro-beam, Halle (Germany); A. Science and Technology Prihodovsky, V. Ploshikhin, A. Llin, Organisation, Kirrawee DC /Sydney R. Logvinov, Neue Materialien (Australia); R. Dippenaar, University Bayreuth GmbH (Germany) Internal Stresses of Wollongong (Australia); H. and Thermal Fatigue Clemens, Montanuniverität, Leoben Three-Dimensional (Germany) Atom Probe

Forming of Two Deformation Mechanisms in Electron Beam Welding and 11:40 High-Manganese TRIP and Micron-Sized PST-TiAl Brazing of TWIP Steels Compression Samples: Titanium-Aluminides with B. Wietbrock (Sp), G. Hrt, RWTH Experiment and Model High Niobium Content Aachen University (Germany) M. Rester (Sp), F.D. Fischer, A. Backhaus (Sp), U. Reisgen, S. University of Leoben (Austria); C. Olschok, RWTH Aachen University Kirchlechner, Austrian Academy of (Germany) Sciences, Leoben (Austria); T. Schmölzer, H. Clemens, University of Leoben (Austria) et al.

Recrystallization Kinetics Dislocation – Twin Resistance Spot Welding 12:00 and Texture Evolution during Interaction in Gamma-TiAl and Weldbonding of Annealing in Cold Rolled Y.-T. Chiu (Sp), University of Advanced High Strength High Mn Austenitic Steels Birmingham (UK); P. Veyssière, Steels Y. Lü (Sp), D.A. Molodov, G. LEM, CNRS/ONERA, Chatillon G. Weber (Sp), S. Bauser, H. Gaul, Gottstein, RWTH Aachen University Cedex (France) L.-A. Pepke, M. Rethmeier, Federal (Germany) Institute for Materials Research and Testing, Berlin (Germany)

Forming of Two High-Manganese

Load Adapted Design of Surface Topographies after The Estimation of the 12:20 Steel Car Body Components Nanoindentation and their Contact Interface by Local Laser treatment Utilization to Quantify the Temperature during A. Jahn (Sp), Fraunhofer Institute for Plastic Anisotropy of Resistance Spot Welding of Material and Beam Technology, Gamma-TiAl on the Single Zinc Coated Steels Using Dresden (Germany); G. Wunderlich, Crystal Length Scale Numerical Technique Volkswagen Sachsen GmbH, C. Zambaldi (Sp), F. Roters, S. M. Galler (Sp), N. Enzinger, C. Zwickau (Germany); B. Donat, IMA Zaefferer, D. Raabe, Max Planck Sommitsch, Technical University of GmbH, Dresden (Germany) Institute for Iron Research GmbH, Graz (Austria) Düsseldorf (Germany)

Production of Biologically Dislocation Dissociations in Residual Stress and Fatigue 12:40 Inspired Sintered steel Parts B2 Alloys in Laser Beam Welded via the Pressure Slip Casting V. Paidar (Sp), ASCR, Prague (Czech T-Joints of Al Alloys for process Republic); Y.-S. Lin, M. Clark, V. Aircraft Construction T. Burbach (Sp), RWTH Aachen Vitek, University of Pensilvania, P. Staron (Sp), F.S. Bayraktar, D. University (Germany); K.D. Toews, Philadelphia (USA) Schnubel, N. Huber, A. Schreyer, DORST Technologies, Kochel am GKSS Research Centre, Geesthacht See (Germany); R. Diemer, Feinguss (Germany) Blank, Riedlingen (Germany); A. Bührig-Polaczek, RWTH Aachen University (Germany)

31 Diffusion of Hafnium in SiCO/Hafnia Voreinstellung für den Datenimport pm1 Thursday Symposium: B6 Symposium: D1 Symposium: C4 Symposium: F3 Room: A1 Room: A2 Room: A3 Room: A4 Mechanical Properties and Microstructure Additive Manufacturing and Interfaces Microstructure Characterisation Field Assisted Sintering Techniques

Non-Ferrous Alloys Functionalised Bulk Materials Additive Manufacturing Surface Modification and Interfacial Parallelen im Layout: links Reactions mitte rechts

M. Krüger, D. Rafaja, TU Bergakademie Freiberg B. Baufeld, Katholieke Universiteit N. Shirtcliffe, Nottingham Trent Otto-von-Guericke-Universität (Germany) Leuven (Belgium) University (UK) Magdeburg (Germany) 14:00 Auger and Transmission Effect of Grain Size and Finite Improved Production Rate in Metal Injection Moulding for Eletron Microscopy of Mobility of the Boundary Additive Manufacturing with Producing Stainless Steel Lead-Contaminated Junctions on Grain EBM MultiBeam™ and Titanium Implant Aluminum Alloy AA6082 Boundary Migration of U. Ackelid (Sp), M. Svensson, Surfaces with Defined S. Oswald (Sp), T. Gemming, Connected Granular Arcam AB, Göteborg (Sweden) Micrometer and Leibniz Institute for Solid State and Systems Submicrometer Structures for Materials Research Dresden L. Barrales-Mora (Sp), RWTH Aachen Enhanced Cell Performance (Germany); J. Aegerter, Hydro University (Germany); L.S. V. Friederici (Sp), P. Imgrund, Aluminium Deutschland GmbH, Shvindeleman, Russian Academy of Fraunhofer-Institute for Manufacturing Technology and Sintering Bonn (Germany); M.K. Schaper, TU Science, Chemogolovka (Russian Mechanism of LiF Dresden (Germany) Federation); G. Gottstein, RWTH Applied Materials Research, Bremen Influence of Surface Aachen University (Germany) (Germany); A. Bruinink, C. Brose, Condition on M. Bitar, Empa Materials Science and Technology, St. Gallen 14:20 The Effect of 3D Networks Sintering Mechanism of LiF Three Dimensional Printing Cold Atmospheric Pressure Formed by Aluminides and Doped Magnesium for the Manufacture of Plasma for the Modification Eutectic Si on the High Aluminate Spinel Ceramic Dental Prostheses and Etching of Biomedical Temperature Strength of Cast (MgAl2O4) K. Haderk (Sp), H.-J. Richter, Relevant Surfaces Al-Si Piston Alloys M.M. Müller (Sp), H.-J. Kleebe, Fraunhofer IKTS, Dresden K. Fricke (Sp), K. Schröder, T. von Z. Asghar (Sp), G. Requena, H.P. Technische Universität Darmstadt (Germany); A. Grzesiak, C. Graf, O. Woedtke, K.-D. Weltmann, INP Degischer, Vienna University of (Germany) Refle, Fraunhofer Institute for Greifswald e.V. (Germany) Technology, Wien (Austria); E. Manufacturing Engineering and Boller, European Synchrotron Automation IPA, Stuttgart Radiation Facility, Grenoble (France) (Germany)

14:40 Structural Evolution of a Influence of Surface Additive Manufacturing Surface Biofunctionalisation: Ti-Based Bulk Metallic Glass Condition on Hydrogen Technologies for 3D Printing of Biological during Heating Environmental Ebrittlement Fabrication of Biocompatible Materials N. Zheng (Sp), G. Wang, M. Stoica, of 304 Austenitic Stainless and Biodegradable I. Grunwald (Sp), I. Wirth, E. Groth, M. Calin, N. Mattern, J. Eckert, Steels Photopolymers J. Schumacher, M. Maiwals, V. Leibniz Institute for Solid State and M. Martin (Sp), Ruhr-University of M. Schwentenwein (Sp), C. Heller, Zöllmer, M. Busse, Fraunhofer Materials Research Dresden Bochum (Germany); S. Weber, X. Qin, Vienna University of Institute for Manufacturing (Germany) Helmholtz Zentrum Berlin, Bochum Technology (Austria); F. Varga, Technology and Applied Materials (Germany); W. Theisen, Ludwig Boltzmann Institute of Research, Bremen (Germany) Ruhr-University of Bochum Osteology Hanusch Hospital, Vienna (Germany) (Austria) et al. Prediction of Deformation

15:00 Development and Nanocrystalline Metal Development of a two In-Situ-ATR-FTIR Characterization of Gamma Hydrides Used as Hydrogen Photon Polymerization Spectroscopy: A Versatile Prime Hardened Storage Materials Studied setup for Structuring optical Tool to Address Interfacial Cobalt-Base Superalloys with Photons and Neutrons Waveguides with High Problems in Life Sciences A. Bauer (Sp), University of P.K. Pranzas (Sp), U. Bösenberg, F. Throughput M. Müller (Sp), W. Ouyang, B. Erlangen-Nürnberg (Germany); S. Karimi, M. Münning, O. Metz, H.-W. K. Stadlmann (Sp), K. Cicha, J. Keßler, Leibniz Institute of Polymer Neumeier, University of Cambridge Schmitz, F. Beckmann, GKSS Kumpfmüller, R. Liska, J. Stampfl, Research Dresden (Germany) (UK); F. Pyczak, GKSS Research Research Centre, Geesthacht Vienna University of Technology, Centre Geesthacht (Germany); M. (Germany); M. Dornheim, A. Wien (Austria); U. Hinze, B. Göken, University of Schreyer, GKSS Research CentreA., Chichkov, Laser Zentrum Hannover Erlangen-Nürnberg (Germany) Geesthacht (Germany) et al. (Germany)

15:20 High Strength of Low On the Structures of Electrochemical Interaction Resistivity CuAg Tapes Metastable Mixed at the Interface of J. Freudenberger (Sp), A. Gaganov, Nanocrystals Ti-45wt.%Nb in Simulated J. Lyubimova, H. Klauss, L. Schultz, D. Wang (Sp), Karlsruhe Institute of Physiological Media Leibniz Institute for Solid State and Technology, D. Zander (Sp), Technical University Materials Research Dresden Eggenstein-Leopoldshafen of Dortmund (Germany); M. (Germany) (Germany); J. Suffner, Technische Jendras, Leibniz University of Universität of Darmstadt (Germany) Hannover, Garbsen (Germany) et al.

32 Nanocrystalline Metal Hydrides Voreinstellung für den Datenimport Thursday pm1 Symposium: B5 Symposium: B1 Symposium: C3 Room: A5 Room: A03 Room: A04 New Methods in Materials Intermetallic Aluminides: Joining Design Physical Metallurgy and Processing

Characterization Methods Mechanical Performance Cored Filler Wire Development, Parallelen im Layout: links Fatigue and Cracking mitte rechts

F. Roters, Max-Planck-Institut für J.D. Paul, GKSS-Forschungszentrum M. Galler, Technische Universität Graz Eisenforschung GmbH, Düsseldorf Geesthacht GmbH (Germany) (Austria) (Germany) Development of New Potential and Development of New Ferritic 14:00 Materials Using Implementation Status of Stainless Steel Filler Wire for High-Throughput TiAl Alloys in Aero-Engine Welding Automotive Exhaust Experimentation Application Manifolds A. Ludwig, Ruhr-University Bochum D. Roth-Fagaraseanu, S. Gebhard V. Villaret (Sp), F. (Germany) (Sp), F. Turley, Rolls-Royce Deschaux-Beaume, S. Rouquette, G. Deutschland Ltd. & Co. KG, Fras, Université Montpellier 2, Blankenfelde-Mahlow (Germany) Nimes Cedex (France); J.-M. Fortain, AIR LIQUIDE CTAS, St. Ouen Sintering l‘aumôn (France); F. Januard, AIR Mechanism of LiF LIQUIDE CTAS, St Ouen l'aumône Influence of Surface Condition on

Prediction of Deformation Surface Effects on the Influence of an Increasing 14:20 Mechanism using Mechanical Properties of Al/O-Ratio on the Thermodynamics-Based SFE Gamma Titanium Morphology of Non-Metallic Maps in High-Mn Steels Aluminides Inclusions in High-Strength Systems J. Lindemann (Sp), M. Glavatskikh, Steel Welds A. Saeed-Akbari (Sp), U. Prahl, W. Brandenburg University of W. Vanovsek (Sp), C. Bernhard, Bleck, RWTH Aachen University Technology, Cottbus (Germany); C. Leoben University (Austria); M. (Germany) Leyens, Technische Universität Fiedler, Böhler Welding Group Dresden (Germany) (Austria); G. Posch, Böhler Welding Group (Austria); C. Strauß, Böhler Welding Group, (Austria)

Elastic Properties of Fe-Mn Atomic Level Observation of Characteristics of the Hot 14:40 Alloys Probed by Theory Mechanical Damage in Shot Ductility and Weldability of and Experiment Peened TiAl High Manganese Steel T. Gebhardt (Sp), D. Music, J.M. F. Appel (Sp), U. Lorenz, GKSS J. Yoo (Sp), S. Kim, J. Lee, C. Lee, Schneider, RWTH Aachen University Research Centre, Geesthacht Hanyang University, Seoul (Korea, (Germany) (Germany); J. Lindemann, M. Republic) Glavatskikh, Technical University of Brandenburg Cottbus (Germany)

Prediction of Deformation

Microstructural Evolution of Thermo-Mechanical Fatigue Revealing, Typifying and 15:00 a Precipitation Hardening Behavior of the Intermetallic Assessing “Non-Predictable Stainless Steel studied by Gamma-TiAl Alloy TNB-V5 Flaws”, Crack Type IV, by In-Situ and Ex-Situ with Different Microstructure Quantitative Acoustic Transmission Electron H. Biermannn (Sp), Technical Emission Non-Destructive Microscopy University of Freiberg (Germany); M. Inspection, Photo-Elastic and E.-M. Nick (Sp), A. Reinholdt, M. Roth, IAV Chemnitz (Germany) Metallurgical Methods Müller, T.E. Weirich, W. Bleck, G. Muravin (Sp), I. Mizrahi, Margan RWTH Aachen University (Germany) Physical Diagnostics Ltd, Netanya (Israel); N. Frage, B. Gurion, University of the Negev, Beer Sheva (Israel)

X-Ray and Electron Thermomechanical and Application of Fatigue 15:20 Diffraction Analysis of Isothermal Fatigue of the Approaches on Fillet Welds Bainitic Structure in Steels TiAl-Base Intermetallic Alloy of High-strength Steel Obtained by Continuously TNB-V2 M. Stoschka (Sp), M. Leiter, T. Cooling Technique A. El Chaikh (Sp), T. Heckel, Fössl, University of Leoben M. Masimov (Sp), N. Kwiaton, University of Siegen (Germany); F. (Austria); H. Leitner, Komptech Salzgitter Mannesmann Forschung Appel, GKSS Forschungszentrum Umwelttechnik GmbH, Frohnleiten GmbH (Germany) Geestacht (Germany); H.-J. Christ, (Austria); W. Eichlseder, University University of Siegen (Germany) of Leoben (Austria)

33 Nanocrystalline Metal Hydrides Postersession - On Display Tuesday through Thursday

Topic: A - Functional Materials

Intelligent Materials A2-480 Elastic High Temperature Stable A2-751 Design, Simulation and Fabrication Macroscopically Expanded of Langasite Cantilever Arrays Nanostructured Materials J. Sauerwald (Sp), Technical University of A2-200 Piezoelectric Membrane Arrays and Y.K. Mishra, S. Kaps, T. Preusse, R. Adelung Clausthal, Goslar (Germany); A. Brose, B. Field Emission Tips for High (Sp), CAU Kiel (Germany) Schmidt, E. Ansorge, University of Magdeburg Temperature Sensors (Germany) J. Sauerwald (Sp), D. Richter, H. Fritze, A2-502 Mixed Metal Fluorides as Derived Technical University of Clausthal, Goslar Electrolyte in Solid State Fluoride-Ion A2-752 Temperature Sensors in Multilayer (Germany) Battery Ceramic D. Wang (Sp), V. Sepelak, H. Hahn, M. L. Rebenklau (Sp), Fraunhofer-Institut für Fichtner, Karlsruhe Institute of Technology, A2-298 Component-Integrated NOx-sensors Keramische Technologien und Systeme, Eggenstein-Leopoldshafen (Germany) oral poster with Doped Semiconducting Dresden (Germany); U. Partsch, M. Kusnezoff, Metal-Oxide Electrodes for Control A. Michaelis, Fraunhofer Institute for Ceramic and Monitoring of Exhaust Emission A2-566 Ferromagnet-Semiconductor Hybrid Technologies and Systems, Dresden (Germany) Reduction Structures: Relation Between Structure A. Yüce (Sp), C.G. Mondragon-Rodriguez, B. and Magnetism from the Ab Initio A2-763 Depth-Selective Electronic and Point of View Saruhan, German Aerospace Centre, Köln oral poster Magnetic Properties of the Heusler (Germany) H.C. Herper (Sp), P. Entel, University of System Co2MnSi at an MgO Tunnel Duisburg-Essen (Germany) Barrier A2-319 Defect Structure in Sr(Fe,Ti)O3-x B. Krumme, University of Duisburg-Essen A2-576 Magnetic Nanocomposite (Germany) oral poster Materials for Preparation, Characterization and Temperature-Independent Oxygen Applications Sensors A. Kulkami, V. Zaporojtchenko, T. Strunskus R.-A. Eichel (Sp), M.D. Drahus, University of (Sp), F. Faupel, E. Quandt, F. Hettstedt, R. Freiburg (Germany) Knöchel, V.S.K. Chakravadhanula, L. Kienle, Christian-Albrechts-University of Kiel A2-377 Magnetic Field Enhanced (Germany) Crystallisation of PZT-CFO Mesoporous Composites A. Piorra (Sp), Inorganic Functional Materials, A2-585 Magnetoelectric FeCoSiB-AlN Thin Kiel (Germany); M. Wuttig, University of Film Composites for Magnetic Field A3-67 Experimental Study of the Porous Maryland (USA); E. Quandt, Inorganic Sensor Applications Structure of Cap Rocks: Adsorption Functional Materials, Kiel (Germany) H. Greve (Sp), E. Woltermann, of Nitrogen (77 K) and Mercury Christian-Albrechts-University of Kiel Porosimetry (Germany); H.-J. Quenzer, B. Wagner, A2-383 Electric Field-Dependent Structure of M. Schmitt (Sp), C.P. Fernades, J.A.B. Cunha Fraunhofer ISIT, Itzehoe (Germany); E. Quandt, BNT-BKT-KNN Lead-Free Neto, F.G. Wolf, Federal University of Santa Christian-Albrechts-University of Kiel Piezoceramics Catarina, Florianópolis / SC (Brazil) et al. (Germany) E.-M. Anton, Technical University of Darmstadt (Germany) A3-154 Structure Investigation of Mixed A2-594 Oxygen Sensing and Control and its oral poster Silica-Titania Oxide Materials via A2-453 High-Temperature Characterization Combination with Electromagnetic In-Situ SAXS Measurements of Langasite Based Piezoelectric Levitation J. Akbarzadeh (Sp), University of Vienna Components by Laser Doppler J. Brillo, I. Egry, German Aerospace Center, (Austria); S. Flaig, University of Ulm Vibrometry Cologne (Germany); M. Schulz (Sp), H. Fritze, (Germany); H. Peterlik, University of Vienna S. Schmidtchen (Sp), J. Sauerwald, H. Xia, H. Technical University of Clausthal, Goslar (Austria); N. Hüsing, University of Ulm, Fritz, Clausthal University of Technology, (Germany) (Germany) Goslar (Germany) A2-635 FeCo/TiN Multilayer Thin Films with A3-213 Facile and Template-free Synthesis of A2-466 Energy Loss Magnetic Chiral Optimized Mechanical and Soft Mesoporous Anatase TiO2 for oral poster Dichroism: A Tool for the Ferromagnetic Behavior---Growth High-Efficiency Dye-Sensitized Solar Investigation of Magnetism on the Conditions, Microstructure and Cells Nanoscale Macroscopic Properties W. Shao (Sp), F. Gu, East China University of I. Ennen (Sp), S. Löffler, M. Stöger-Pollach, P. C. Klever (Sp), K. Seeman, M. Stüber, S. Ulrich, Science and Technology, Shanghai (China); C. Schattschneider, Vienna University of H. Leiste, Karlsruher Institute of Technology, Li, Ludwig-Maximilians University, München Technology, Wien (Austria) Eggenstein-Leopoldshafen (Germany) (Germany)

A2-470 Development of Freestanding, A2-707 Resistive Switching in Ag-Nb2O5-Ag- A3-246 Catalytic Applications of np-Au Martensitic, Single Variant Fe70Pd30 Structures oral poster A. Wittstock (Sp), S. Röhe, V. Zielasek, Thin Films for Strain Sensor M. Franke (Sp), T. Mikolajick, Technical Universität Bremen (Germany); J. Biener, Applications University of Freiberg (Germany) Lawrence Livermore National Laboratory, C. Bechtold (Sp), Christian-Albrechts-University Livemore (USA); C. Friend, Havard University, of Kiel (Germany); J. Buschbeck, IFW Dresden A2-711 Review: Lean NOx Trap Materials as Cambridge (USA); M. Baumer, Universität (Germany); A. Lotnyk, B. Erkartal, oral poster Sensitive Elements for NOx Sensors Bremen (Germany) Christian-Albrechts-University of Kiel A. Geupel (Sp), R. Moos, University of (Germany); S. Hamann, Ruhr University of Bayreuth (Germany) Bochum (Germany) et al.

34 Postersession - On Display Tuesday through Thursday

Topic: A - Functional Topic: B - Structural Materials Materials

A3-345 Computational Fluid Dynamic (CFD) A4-416 Dewetting Suppression of Intermetallic Aluminides: Simulations of Liquid Steel Flow in Polystyrene Thin Film Using Physical Metallurgy and Ceramic Foam Structures Dendrimer Additives Processing J. Klostermann (Sp), R. Schwarze, C. Brücker, N. Pangpaiboon (Sp), N. Traiphol, R. Technical University of Freiberg (Germany) Traiphol, Chulalongkorn University, Bangkok (Thailand) B1-53 Gamma Titanium Aluminide Parts A3-655 Surface Chemistry on Nanoscale Manufactured by Electron Beam oral poster Materials A4-424 Preparation and Thermal Analysis Melting A. Hamza, M. Biener (Sp), Lawrence Livermore of Poly(methyl U. Ackelid, Arcam AB, Göteborg (Sweden) National Laboratory (USA) Methacrylate)/Montmorillonite Nanocomposites B1-57 Numerical Simulation of the Fracture A. Lis (Sp), J. Laska, AGH University of Science in Lamellar Ti-Al Crystals and Technology, Krakau (Poland) P. Leiva-Ronda (Sp), K. Durst, M. Göken, University Erlangen-Nuremberg (Germany) A4-567 Nanocomposite Films with Embedded Silver Nanoparticles for B1-269 A Preliminary Study on the Polymer Nanocomposites Antimicrobial Applications Microstructure and Mechanical T. Strunskus (Sp), T. Hrkac, V.S.K. Properties of the Intermetallic Alloys Chakravadhanula,, N. Wohner, V. Ti-38.5Al-xFe and A4-13 Investigation of a Chemical Surface Zaporojtchenko, R. Podschuh, D. Ti-38.5Al-y(Fe,Nb,B) Modification on the Distribution and Garbe-Schönberg, F. Faupel, R. Gaisin (Sp), V.M. Imayev, R.M. Imayev, Adhesion of an Adhesion Promoter Christian-Albrechts-University of Kiel Russian Academy of Sciences, Ufa (Russian in Porous Ceramic Precursors (Germany) Federation); H.-J. Fecht, Ulm University, V. Steier (Sp), C. Koplin, A. Kailer, Fraunhofer (Germany) Institute for Mechanics of Materials, Freiburg A4-591 Piezoelectricity in Thermally (Germany); H. Reinecke, University of Freiburg Evaporated Thin Films of Nylon 11 B1-272 A Novel Design Approach of TiAl (Germany) K. Meurisch, V. Zaporojtchenko, T. Strunskus Alloys Based on Modulated (Sp), F. Faupel, Christian-Albrechts-University Multiphase Structures A4-42 Tribological Characteristics of Epoxy of Kiel (Germany) F. Appel (Sp), J.D.H. Paul, M. Oehring, GKSS Based Nano-Composites under Dry Research Centre, Geesthacht (Germany) Sliding and Water Lubricating Conditions A4-652 Irradiation Stimulated Molecular Structure Change and Resistivity of B1-299 Thermodynamic Glide Parameters S. Mohamed, T. Mahmoud, Benha University, Polyethylene Composites and Internal Stresses of TiAl Alloys Shubra (Egypt); I. El Mahallawi (Sp), British U. Gafurov (Sp), N. Mukhtarova, L. Kabisova, R. Hoppe (Sp), F. Appel, GKSS Research Centre, University in Egypt, El Sherouk City (Egypt); Geesthacht (Germany) T. Khalifa, Benha University, Shubra (Egypt) Institute of Nuclear Physics, Tashkent (Uzbekistan); E. Vlasova, Institute of B1-322 Mechanical and Electrochemical Macromolecular Compounds, Saint-Petersburg Characterization of Model S-Phase A4-138 Polyphehylanthranilic Acid - Fe3O4 (Russian Federation) Nanocomposites (Al2CuMg) Particles in AA2024-T3 G. Karpacheva (Sp), S. Ozkan, Russian C. Senöz (Sp), Max Planck Institute for Iron A4-755 Preparation and Properties of Academy of Sciences, Moscow (Russian Research, Düsseldorf (Germany); A. Maljusch, Composite Films of Terthiophene Federation); N. Perov, M. V. Lomonosov Ruhr University, Bochum (Germany); S. and Titanium Nanoclusters Moscow State University (Russian Federation) Klemm, M. Rohwerder, Max Planck Institute M. Drabik (Sp), J. Matousek, J. Tousek, J. for Iron Research, Düsseldorf (Germany) et al. Touková, H. Biederman, Charles University in A4-217 Modelling Stiffness of Nano Layered Prague (Czech Republic) Silicate Modified PA 6 vVa B1-335 Fabrication of TiNi/AlNi/TiC Analytical Composite Models and reinforced Aluminium Matrix FEM Micromechanical Modelling Composites by Laser melt Injection J. Huang (Sp), U. Weber, S. Schmauder, S. S.T. Camagu (Sp), S.L. Pityana, G. Govender, Geier, University of Stuttgart (Germany) L. Rampedi, CSIR, Pretoria (South Africa)

A4-257 Highly filled Anisotropically B1-338 Microstructural influence on Conductive Composites of Exfoliated Mechanical Behavior of a Duplex Graphite type TiAl Alloy: Experimental and G. Öztürk (Sp), G.P. Hellmann, Deutsches Numerical Investigation Kunststoff-Institut, Darmstadt (Germany) M.R. Kabir (Sp), L. Chemova, M. Bartsch, German Aerospace Center, Köln (Germany) A4-354 Conductive Plastics with Very Little Carbon Black B1-342 Particle Analyses of Free-Machining D. Ulbricht (Sp), G.P. Hellmann, Technische Titanium Alloys Universität Darmstadt (Germany) J. Laukart (Sp), C. Siemers, J. Rösler, Technical University of Braunschweig (Germany) A4-371 Effect of Nanocarbon Filler Type on Character of Nanocarbon-Polymer B1-517 Mocrostructure Evolution of Steel and Composite Formation Iron Eroded by Liquid Aluminium L.L. Vovchenko, Kyiv Taras Shevchenko Alloy National University, Kiev (Ukraine); A. G. Pasche, A. Hessler-Wyser (Sp), R. Schäublin, Lazarenko (Sp), Technical University of Ecole Polytechnique Fédérale de Lausanne Ilmenau, Kiev (Ukraine) et al. (Switzerland)

35 Postersession - On Display Tuesday through Thursday

Topic: B - Structural Materials

B1-534 Ab Initio Study of Elastic Properties B2-455 Development and Characterization of B4-423 Amorphous Al-Based Anode in Fe3Al-Based Alloys oral poster Novel Corrosion-Resistent TWIP Steels Materials for Li-Ion Batteries M. Friak (Sp), J. Deges, F. Stein, M. Palm, G. S. Weber (Sp), Helmholtz-Zentrum-Berlin für F. Thoss (Sp), L. Giebeler, Technische Frommeyer, J. Neugebauer, Max Planck Materialien und Energie GmbH, Berlin Universität Dresden (Germany); S. Oswald, Institute for Iron Research GmbH, Düsseldorf (Germany); L. Mujica, Max-Planck Institute of Leibniz Institute for Solid State and Materials (Germany) Iron Research GmbH, Düsseldorf (Germany); W. Research Dresden (Germany); J. Eckert, Theisen, Ruhr University Bochum (Germany) Technische Universität Dresden (Germany) et B1-593 TEM Studies of the Ternary al. Ti36Al62Nb2 Alloys V.S.K. Chakravadhanula (Sp), B4-702 3D Fabrication of Bioactive Glass Christian-Albrechts-University of Kiel Implants (Germany); K. Kelm, German Aerospace Center, R. Meszaros (Sp), A. Vander, L. Wondraczek, Köln (Germany); D. Sturm, University of University of Erlangen-Nürnberg (Germany) Magdegurg, Magdeburg (Germany) et al. Refractory Materials

B1-660 Ferromagnetic Shape Memory Alloy Co38Ni33Al29 - Crystal Growth and B3-235 Influence of Raw Materials on the New Methods in Materials Structure Evolution Microstructure for ULCC Castables Design J. Kopecek (Sp), M. Jaro ová, D. Majtás, J. C. Liebrich, Technical University of Freiberg Drahokoupil, S. Sedláková-Ignácová, P. (Germany) Molnár, O. Heczko, Academy of Sciences, Prag (Czech Republic) B3-351 Thermomechanical Characterisation B5-305 Novel Production Technique for of Carbon-Containing Refractory Directionally Solidified Cast Parts Ceramics H. Lu (Sp), D. Ma, T. Burbach, A. B1-664 Application of Electrochemical W. Zhang (Sp), O. Dreibati, M. Wolf, R. Bührig-Polaczek, RWTH Aachen University Nanoindentation for Development of Ossenbrink, V. Michailov, Brandenburg (Germany) Hydrogen Resistant Ternary FeAl University of Technology, Cottbus (Germany) Intermetallic Alloys. A. Barnoush (Sp), M. Zamanzade, H. Vehoff, B5-364 High-Value Polymer Products from Saarland University, Saarbrücken (Germany) B3-373 Modeling ofTthermal Induced PET Bottle Waste Damage in Composite Materials J. Spengler (Sp), G.P. Hellmann, Technische B1-667 New Intermetallic Ni3Al-Based Alloy D. Pilipenko (Sp), H. Emmerich, RWTH Aachen Universität Darmstadt (Germany) for PREP-Process University (Germany) A. Logacheva (Sp), A. Beresnev, A. Logachev, B5-372 Deformation Mechanisms and Razumovsky, OAO Kompozit, Korolev B3-469 Influence of the Composition and the Fracture Behaviour (Russian Federation) Microstructure on the Radiative in High Manganese Steel Properties of Low-Emitting Ceramics F. Nafati (Sp), U. Prahl, W. Bleck, RWTH M.H. Keller (Sp), M.C. MC. Arduini-Schuster,, Aachen University (Germany) J. Manara, ZAE Bayern, Würzburg (Germany); G. Tschichholz, G. Steinborn, BAM Federal B5-403 Investigations of Topological Surface Institute for Materials Research and Testing, Changes during Tensile Deformation Berlin (Germany) of Steels Modern Steels S. Hoffmann (Sp), W. Bleck, RWTH Aachen B3-630 Material Properties of Alumina University (Germany) Ceramics with Titania and Zirconia Additions for Refractory Applications B5-435 A Probabilistic Model to Predict the B2-39 Influence of the Martensite Formation Initiation of Delayed Cracking in oral poster on the Mechanical Properties of S. Dudczig (Sp), C.G. Aneziris, D. Veres, Technical University of Freiberg (Germany) Stainless Steel AISI 301 High Alloyed CrMnNi Steels X. Guo (Sp), W. Bleck, RWTH Aachen A. Jahn (Sp), A. Kovalev, A. Weiß, P.R. University (Germany); J. Post, M. Groen, Scheller, Technical University of Freiberg B3-634 Refractory Reactions in Contact with High Manganese Alloyed TRIP-Steel Advanced Technology Center, Drachten (Germany); S. Wolf, TU Bergakademie Freiberg (Netherlands) (Germany); L. Krüger, Technical University of W. Schärfl (Sp), C.G. Aneziris, H. Biermann, Freiberg (Germany) et al. Technical University of Freiberg (Germany) B5-474 Analysis of Substructure and Texture-Related Anisotropy of High B2-155 Research on Quality Improvement of Strength API Spiral-Welded Pipe oral poster Continuously Cast Billets Unalloyed Grades and Low Alloyed Steels M. Masimov (Sp), S. Bremer, Salzgitter I. Butnariu, University Politehnica of Bucharest Mannesmann Forschung GmbH (Germany) (Romania); I. Butnariu, Socesit Bucharest Functional Amorphous (Romania); D. Butnariu (Sp), University Materials and Glasses B5-499 Ab Initio Study of Thermodynamic, Princeton (USA) Structural and Elastic Properties of Al-/Si-Substituted Laves Phases B2-157 High Quality Steel Production Using B4-142 Deformation Mechanisms in Fe2Nb and Fe2W oral poster RH Degassing Process Amorphous-Crystalline F. Liot, M. Friak, J. Neugebauer, D. Ma (Sp), P. Wolinski (Sp), M. Warzecha, J. Jowsa, Nanocomposites Max-Planck Institute for Iron Research GmbH, Czestochowa University of Technology Y. Ritter (Sp), K. Albe, Technische Universität Düsseldorf (Germany) (Poland) Darmstadt (Germany)

36 Postersession - On Display Tuesday through Thursday

Topic: B - Structural Materials

B5-507 Accurate Description of Elastic B6-181 High and Low-Energy Activations of B6-489 Creep Testing of Thin-Walled Ni-Base Properties of Random Alloys with Nano-Zirconia Based Systems Superalloys Minimum Supercell Sizes S. Kulkov (Sp), S. Buyakova, Tomsk State M. Brunner (Sp), M. Bensch, R. Völkl, U. J. von Petzold, A. Dick, M. Friak (Sp), J. University (Russian Federation) Glatzel, University of Bayreuth (Germany) Neugebauer, Max Planck Institute for Iron Research GmbH, Düsseldorf (Germany) B6-218 Mechanical Properties and Texture B6-538 Non-Uniform Thermal Condition and Evolution of CuAlZn-Wire Deformed Grain Defect Formation in Superalloy B5-525 X-Ray Investigation of Ferrito-Pearlitic at Cryogenic and Room Casting Clusters during Directional Steels for Prediction of their Temperature Solidification Properties A. Kauffmann (Sp), IFW Dresden (Germany); J. D. Ma, Q. Wu (Sp), S. Hollad, A. D. Simek (Sp), D. Rafaja, V. Klemm, M. Freudenberger, U. Gaitzsch, H. Klauß, J. Eckert, Bührig-Polaczek, RWTH Aachen University Motylenko, G. Schreiber, G. Lehmann, A. L. Schultz, Technische Universität Dresden (Germany) Oswald, R. Schmidtchen, Technical University (Germany) of Freiberg (Germany) B6-563 Modifying the Corrosion and Wear B6-237 Strength and Ductility Improvement Resistance of Martensitic Steel AISI B5-636 The TEM Investigation of Orientation of Wrought Magnesium by Rare 420F in the Processes of Relationships and Defect Structures Earth Alloying Low-Temperature Glow Discharge in Interfaces of Hot-Rolled Pearlitic T. Al-Samman, X. Li (Sp), RWTH Aachen Assisted Nitriding Steel University (Germany) T. Borowski (Sp), Warsaw University of M. Motylenko (Sp), V. Klemm, D. Rafaja, D. Technology (Poland); T. Brojanowska, T. Simek, G. Lehmann, A. Oswald, B. Fachmann, B6-277 A Dislocation Dynamics Study of Wierzo, A.Warsaw University of Technology Technical University of Freiberg (Germany) Deformation Mechanisms in (Poland) Ultra-Fine Grained Metals N. Ahmed (Sp), A. Hartmaier, Ruhr-University B6-624 Effect of Growth Rate on B5-682 Characterization of a High Strength Bochum (Germany) Aluminium – Alumina Hybrid Microstructure in a Sn-Sb Peritectic Alloy during Directional Solidification M.C. Poletti, Vienna University of Technology B6-318 Appearance of Dislocation Mediated (Austria); M. Balog, F. Simancik, Slovak E. Yilmaz (Sp), M. Gündüz, Erciyes University, and Orientation Selective Kayseri (Turkey) Academy of Sciences, Bratislava (Slovak Deformation Twinning in a Republic); H.P. Degischer (Sp), Vienna Bimodally Textured FeMnNiCr Alloy University of Technology (Austria) B6-653 Conformation Structure and Local D. Geißler (Sp), J. Freudenberger, A. Loads on Interconnecting Chains in Kauffmann, M. Krautz, H. Klauss, J. Eickemeyer, a Deformed Oriented Crystalline L. Schultz, Leibniz Institute for Solid State and Polymer Materials Research Dresden (Germany) U. Gafurov, Institute of Nuclear Physics, Mechanical Properties and Tashkent (Uzbekistan) B6-359 Micro-Multiaxial Fatigue in the Very Microstructure High Cycle Regime B6-680 Tailoring the Mechanical Properties T. Straub (Sp), T. Kennerknecht, C. Eberl, of Nanocrystalline fcc Metals: A Karlsruhe Institute of Technology (Germany) Molecular Dynamics Study on the B6-54 Effect of Microstructure on the Effects of Twins and Miscible Solutes Fatigue Behaviors of A356 B6-429 Microstructure Evolution of Cu and on Deformation Processes Aluminum Alloy for Automotive Cu-0.18 Mass % Zr Polycrystals A. Stukowski, J. Schäfer, K. Albe (Sp), Wheel Processed by High-Pressure Torsion Technische Universität Darmstadt (Germany) Y.-S. Ahn (Sp), J.-Y. Song, Pukyong National M. Dopita (Sp), H.J. Seifert, D. Rafaja, Technical University, Busan (Korea, Republic); J.-C. Park, University of Freiberg (Germany); M. Janeczek, B6-822 Ductile-to-Brittle Transition Hydrogen Research Institute of Science & Technology, R. Kuvel, Charles University in Prague (Czech Concentrations of V and Nb for PoHang (Korea,Republic) Republic) et al. Hydrogen Permeation Y. Matsumoto (Sp), Oita National College of B6-71 Tensile Properties of Mg/Mg2Si B6-463 Identification of Fundamental Technology (Japan); H. Yukawa, Nagoya Composite in Different Temperatures Materials-Design Limits in Ultra University (Japan); T. Nambu, Suzuka F. Mirshahi (Sp), M. Meratian, M. Panjehpour, Light-Weight Mg-Li alloys via National College of Technology (Japan) F. Mirshahi, Isfahan University of Technology Quantum-Mechanical Calculations (Iran) M. Friak (Sp), W.A. Counts, D. Raabe, J. Neugebauer, Max Planck Institute for Iron B6-94 Control of Residual Stresses and Research GmbH, Düsseldorf (Germany) Deformations along the Autofrettage Process Chain B6-476 Formation Behavior of H. Brünnet (Sp), D. Bähre, Saarland University, Deformation-Induced Layer in Fe-Ni Saarbrücken (Germany) Alloy by Sliding Wear and Shot Peening B6-179 Investigating the Mechanical H. Sato (Sp), N. Nishiura, Y. Kubota, E. Properties of Bi-Modal Al/SiCp Miura-Fujiwara, Y. Watanabe, Nagoya Institute Composites with Nano and Micron of Technology (Japan) Sized Reinforcements M. Jahedi (Sp), B. Mani, M.H. Paydar, Shiraz B6-488 Internal Oxidized Ni-Zr-Y Alloys - University (Iran) Fabrication and Mechanical Properties C. Konrad (Sp), E. Fleischmann, R. Völkl, U. Glatzel, University of Bayreuth (Germany) 37 Postersession - On Display Tuesday through Thursday

Topic: C - Processing

Nanomaterials and Composites C1-586 Optimization of Spray Drier C1-821 Schottky Contacts on ZnO Nanowires C1-33 Internal Oxidation of Platinum oral poster Parameters for Synthesis of ZnO M.-Y. Chern (Sp), R. Lin, National Taiwan oral poster Matrix Composites for Spark Plug Nano Powders University, Taipei (Taiwan) Electrodes Ö. Yildiz (Sp), Kocaeli University (Turkey); T. Eckardt (Sp), D.F. Lupton, H. Manhardt, N. A.M. Soydan, Gebze Institute of Technology, Gübler, W.C. Heraeus GmbH, Hanau (Germany) Gebze/Kocaeli (Turkey) Coatings C1-43 Development and Manufacturing of C1-596 Electric Measurement of Sol-Gel oral poster Nano-Dispersed Cast Al alloys oral poster BaTiO3 Nanowires I. El Mahallawi (Sp), British University in R. Boucher (Sp), P. Renz, C. Li, T. Fuhrlich, J. Egypt, El Sherouk City (Egypt); Y. Shash, M.E. Bauch, K.H. Yoon, Technische Universität C2-74 Bionic CrCN-Layers for Forming Saeed, Cairo University, Giza (Egypt); M. Dresden (Germany); D.C. Lupascu, University of oral poster Tools Hassabo, Britisch University in Egypt, Cairo Duisburg-Essen (Germany) J. Herper (Sp), W. Tillmann, Technical (Egypt) University of Dortmund (Germany)

C1-597 Volume Shrinkage and Crack C2-103 Electron Beam Multi-Stage and C1-203 From Al-Doped ZnO Nanocrystals oral poster Formation during Dealloying of to Transparent Conductive Films Multi-Process Technologies for oral poster Au25Cu75 Liquid Phase Surface Engineering of L. Luo (Sp), M. Niederberger, ETH Zürch, Y. Zhong (Sp), H.-J. Jin, J. Weissmüller, Aluminium Alloys Zürich (Switzerland) Karlsruhe Institute of Technology, M. Klemm (Sp), SZF Stahlzentrum Freiberg e.V. Eggenstein-Leopoldshafen (Germany) C1-358 Optimum Spark-Plasma-Sintering (Germany); R. Zenker, TU Bergakademie Freiberg, (Germany) oral poster (SPS) Condition for Attaining C1-600 Forced Chemical Mixing in Ag-Cu Transparent MgAl2O4 Spinel oral poster Immiscible System Using High C2-118 Development of Multi layer Polycrystal Pressure Torsion K. Morita (Sp), B.-N. Kim, H. Oshida, K. Hiraga, oral poster PVD-Coating for Erosion-Corrosion M. Pouryazdan (Sp), D. Wang, T. Scherer, Protection National Institute for Materials Science, Karlsruhe Institute of Technology, Tsukuba, Ibaraki (Japan) U. Depner (Sp), J. Ellermeier, T. Troßmann, C. Eggenstein-Leopoldshafen (Germany); R.S. Berger, Technische Universität Darmstadt Averback, University of Illinois at (Germany) C1-417 Synthesis and Characterisation of Urbana-Champaign (USA) et al. oral poster Metal-Based Nano-Composites C2-119 Selected Adjustment of Specific Reinforced with CNTs and CNFs C1-665 Preparation of Copper-Nickel Alloy O. Todoshchenko (Sp), Y. Yagodzinskyy, T. oral poster CrN-Coatings to Cover Surface oral poster Nanoparticles by Soft Chemistry Imperfections Saukkonen, H. Hänninen, Laboratory of Method for Functional Printing Engineering Materials, Espoe (Finland) E.M. Slomski (Sp), H. Scheerer, T. Troßmann, E. Pal, University of Bremen (Germany); D. C. Berger, Technische Universität Darmstadt Lehmhus (Sp), M. Busse, Fraunhofer Institute (Germany) C1-464 Dynamical Microscopy of for Manufacturing Technology and Applied oral poster Semiconductor Surface with Materials Research, Bremen (Germany) Submonolayer Metallic Particles C2-285 Influence of the Carbon Fiber Treatment for the Synthesis of V. Lozovski, T. Shevchenko, National C1-672 VLS Growth of SnO2 Nanowires by University of Kyiv, (Ukraine); V. Lysenko, V. C-Fiber-Reinforced Silicon Nitride oral poster Vapor Phase Disporportionation of Ceramics Lashkariov, National Academy of Sciences of a Sn(II) Precursor Ukraine, Kyiv (Ukraine); A. Tsykhonia (Sp), P. Pontiller (Sp), E. Fuchs, M. Willert-Porada, R. Müller (Sp), H. Shen, S. Mathur, University University of Bayreuth (Germany) National Academy of Sciences of Ukraine, Kiev of Cologne, Köln (Germany) (Ukraine) C2-297 Effect of the Aluminium Content and C1-675 Microwave-Assisted Fast and Facile oral poster the Bias Voltage on the C1-482 Process Development for oral poster Synthesis of SnO2 Quantum Dots in Ni-Alloy-Zirconia Ceramic Microstructure Formation in Ti-Al-N oral poster Ionic Liquid Protective Coatings Composites with Interpenetrating L. Xiao (Sp), H. Shen, R. von Hagen, R. Müller, Network C. Wüstefeld (Sp), D. Rafaja, V. Klemm, M. J. Schläfer, J. Pan, S. Mathur, Inorganic and Dopita, M. Motylenko, Technical University of K. Wu (Sp), H.-S. Park, M. Willert-Porada, Materials Chemistry, Köln (Germany) University of Bayreuth (Germany) Freiberg (Germany); C. Baehtz, Forschungszentrum Dresden-Rossendorf, C1-746 Effect of Aging on Mechanical (Germany) et al. C1-556 Tailoring Materials Properties by Properties of Al 8Si 8Fe 1.4V/SiCp oral poster Accumulative Roll Bonding Composites T. Hausöl, V. Maier, C.W. Schmidt, M. Winkler, C2-346 Silane Modified Acrylate Coatings, F. Sariolu, Eastem Mediterranean University, Chemistry and Performance H.W. Höppel (Sp), M. Göken, University of Gazimagusa (North Cyprus); A. Essari (Sp), Erlangen-Nürnberg (Germany) S. Kutschera (Sp), D. Ulbricht, G.P. Hellmann, Elmergib University, Elkhomes (Libya) Technische Universität Darmstadt (Germany)

C1-570 Nanoparticles in Meltspun Filament C1-764 Nb, Hf Doped-TaC Bulk Ceramics via Yarns C2-348 Effect of Nitrogen Incorporation on oral poster an Advance Sol-Gel Route Mechanical Properties of DLC J. Wulfhorst (Sp), G. Seide, T. Gries, RWTH oral poster oral poster R. Peña-Alonso (Sp), K. Pham-Gia, Siemens Coatings on Metallic Substrates Aachen University (Germany) AG, München (Germany) M. Muresan (Sp), L. Zajickova, V. Bursikova, D. Franta, D. Necas, Masaryk University, Brno (Czech Republic); V. Perin, Academy of Sciences of the Czech Republic, Rez (Czech Republic)

38 Postersession - On Display Tuesday through Thursday

Topic: C - Processing

C2-457 Investigations of the Microstructure C2-706 Numerical Simulation of Scratch C3-447 Heat Process Simulation for TIG and the Mechanical Properties of Tests with Coated Materials for the Welding Adhesion Layers in Diamond-Like Verification of Material Models D. Sladoje (Sp), B. Velickovic, M. Bjelic, M. Carbon Coating Systems B. Wielage, T. Lampke, T. Müller (Sp), D. Vukicevic, University of Kragujevac, Kraljevo J. Schaufler (Sp), K. Durst, M. Göken, Nestler, Chemnitz University of Technology (Serbia) University of Erlangen-Nürnberg (Germany) (Germany) C3-549 Friction Spot Welding Of C2-498 Pulsed Laser Deposited C2-757 Friction Mechanism in Thermoplastics: a Preliminary Study oral poster Nanolaminated MAX Phases as Nanocrystalline WC-C Coatings at on the Microstructure and Functional Coatings for High Room and Elevated Temperatures Mechanical Properties of Overlap Temperature Applications F. Lofaj (Sp), Slovak Academy of Sciences, Joints M. Hopfeld (Sp), C. Lange, T. Kups, M. Wilke, Kosice (Slovak Republic); G. Czempura, P.H.F. Oliveira, Federal University of Sao Carlos Technical University of Ilmenau (Germany); AGH-University of Science and Technology, (Brazil); S. Amancio (Sp), J.F. dos Santos, M.W. Barsoum, Drexel University Philadelphia Krakow (Poland); A. Duszová, P. Hvizová, J. GKSS Research Centre, Geesthacht (Germany); E. (USA); P. Schaaf, Technical University of Dusza, Slovak Academy of Sciences, Kosice Hage Jr., Federal University of Sao Carlos Ilmenau (Germany) (Slovak Republic) (Brazil)

C2-506 Importance of Material Properties for C2-816 Surface Engineering- Sol-Gel C3-551 Revealing, Typifying and oral poster the Application of PM-Coatings by Alumina Coatings for Surface Assessment of Interaction Between Hot Deformation Processes Modification of Stainless Steel Crack and Bore Crack Under Normal H. Moll (Sp), W. Theisen, R. Hammelmann, H. Y. Adraider, Teesside University, and Shear Loads by Quantitative Meier, Ruhr-University Bochum (Germany); J. Middlesbrough (UK) Acoustic Emission Non Destructive Frischkorn, S. Reese, RWTH Aachen University Inspection and Photo-Elastic (Germany) Methods I. Mizrahi (Sp), G. Muravin, Margan Physical C2-520 Interface Reactions in the Cr/ta-C Diagnostics Ltd, Beer-Sheva (Israel); N. Frage, oral poster multilayers C2-824 Incorporation of Nano Aluminium Ben Gurion University of the Negev, Beer Sheva U. Ratayski (Sp), D. Rafaja, V. Klemm, U. Oxide for Improvement of Electroless (Brazil) Mühle, Technical University of Freiberg Nickel Plating (Germany); H.-J. Scheibe, M. Leonhardt, S.R. Allahkaram (Sp), M. Zoughi, University of C3-553 On the Feasibility of a New Fraunhofer Institute for Material and Beam Tehran (Iran) Mechanical Joining Technology for Technology, Dresden (Germany) Polymer-Metal Joints C2-826 Preparation of Electroless A.B. Abibe, Federal University of Sao Carlos, Ni-P/nano-ZrO2 Coatings and C2-533 Comparative Studies of Sao Carlos-SP (Brazil); S. Amancio (Sp), J.F. Investigating their Electrochemical Metal-Ceramic-Compound Coatings dos Santos, GKSS Research Centre, Geesthacht oral poster Corrosion Properties (MC3) Implanted with Y and (Germany); E. Hage Jr., Federal University of Annealed at 1200°C in Air and S.R. Allahkaram (Sp), University of Tehran Sao Carlos, Sao Carlos-SP (Germany) Vacuum (Iran); Z. Zarei, Azad University, Tehran (Iran); S. Günschmann (Sp), Technical University of T. Rabizadeh, University of Tehran (Iran) Ilmenau (Germany); J. Wilden, V. Drescher, Berlin University of Technology (Germany); C. Borschel, C. Ronninger, Jena Additive Manufacturing and Friedrich-Schiller-University (Germany) et al. Field Assisted Sintering Joining Techniques C2-568 Producing of Diffusive Surface Layers oral poster on Titanium and its Alloys on the Basis of Intermetallic Phases: TixAly, C3-254 Processing and Modelling of Joining C4-36 Processing of NiTiSn Heusler-Alloys NixAly, CrxAly with the Use of Zones with Moulded-in Holes for for Thermoelectric Applications Textile Reinforced Thermoplastics Duplex Method W. Wunderlich (Sp), Y. Matsumura, G. M. Ossowski (Sp), T. Wierzchon, Warsaw W. Hufenbach, F. Adam, R. Kupfer, P. Lucas Takeshi, T. Izumi, Tokai University, University of Technology (Poland) (Sp), Technische Universität Dresden Kanagawa-ken (Japan) (Germany) C2-605 Deposition and Characterization of C4-123 Simultaneous Electro Discharge oral poster (Ti,W,Cr)B2 Coatings C3-370 Heat Process Simulation for TIG Sintering of Cemented Carbide Alloy A. Newirkowez (Sp), Technical University of Welding and Connection it with High-Speed Clausthal, Clausthal-Zellerfeld (Germany); B. D. Ciric (Sp), S. Stevan, M. Vukicevic, A. Steel Substrate Cappi, R. Telle, RWTH Aachen University Petrovic, M. Vukicevic, University of E. Grigoryev, Moscow (Russian Federation) (Germany); H. Schmidt, Technical University of Kragujevac, Kraljevo (Serbia) Clausthal (Germany) C4-162 Pulsed Electric Field Induced C3-387 Numerical Simulation of Damage Diamond Synthesis from Carbon C2-650 Sintercladding - A Coating Behaviour of Electron beam Welded Nanotubes with Solvent Catalysts oral poster Technology for High Alloyed Steel Joints F. Zhang (Sp), M. Adam, E. Otterstein, E. Powders H.Y. Tu (Sp), S. Schmauder, U. Weber, Burkel, University of Rostock (Germany) M. Blüm, H. Moll (Sp), Ruhr University University of Stuttgart (Germany); Y. Rudnik, Bochum (Germany); S. Weber, V. Ploshikhin, Neue Materialien Bayreuth Helmholtz-Zentrum Berlin für Materialien und GmbH (Germany) Energie GmbH (Germany); W. Theisen, Ruhr University Bochum (Germany)

39 Postersession - On Display Tuesday through Thursday

Topic: C - Processing Topic: D - Characterisation

C4-169 Characterization of Ti-Mg Alloys C4-389 Master Sintering Curve Applied to the Microstructure Characterisation Prepared by SPS Field Assisted Sintering Technique C. Machio (Sp), H.K. Chikwanda, S. Nxumalo, S. Schwarz (Sp), O. Guillon, Technische Council for Scientific and Industrial Research Universität Darmstadt (Germany); M.J. D1-18 Aging of Platinum Films on YSZ (CSIR), Pretoria (South Africa); J.R. Groza, D. Hoffmann, Karlsruhe Institute of Technology G. Beck (Sp), Forschungsinstitut für Quach, University of California, Davis (USA) (Germany) Edelmetalle und Metallchemie (FEM), Schwäbisch Gmünd (Germany); H. Pöpke, B. C4-211 Pressure Effects on the Densification C4-421 Parametric Investigation of Luerssen, J. Janek, Justus-Liebig-University of of Nanocrystalline Hydroxyapatite Temperature and Stress Distribution Gießen (Germany) by Field-Assisted Sintering in Field Activated Sintering T. Tran (Sp), T.B. Holland, J.F. Shackelford, Apparatus D1-107 Microstructure Characterization of J.R. Groza, University of California, Davis (USA) S. Munoz, University of Sevilla (Spain); U. Steel/Alloy 625 System Anselmi-Tamburini (Sp), University of Pavia H. Saghafifar (Sp), D.G. McCarney, P. Shipway, C4-212 Grain Growth Coupled with Rapid (Italy) University of Nottingham (UK) Dehydroxylation during Final Stage Field-Assisted Sintering of C4-519 Synthesis of Ti3SiC2 Complex D1-312 TEM Investigations on LAST-Materials Nanocrystalline Hydroxyapatite Carbide Using the Spark Plasma U. Schürmann (Sp), A. Lotnyk, T. Tran (Sp), T.B. Holland, University of Sintering Technique Christian-Albrechts-University of Kiel California, Davis (USA); U. Jelvestam, U. D. Chmelik (Sp), H.-J.- Seifert, U. Martin, (Germany); D. Perti, Freie Universität Berlin Klement, Chalmers University of Technology, Technische Universität Bergakademie Freiberg (Georgia); V. Duppel, Max Planck Institute for Goteborg (Sweden); J.K. Shackelford, J.R. (Germany); M. Herrmann, J. Räthel, Fraunhofer Solid State Research, Stuttgart (Germany) et al. Groza, University of California, Davis (USA) Institute for Ceramic Technologies and Systems, Dresden (Germany) D1-314 A Scanning TEM Method to Locally C4-231 Microstructure and Properties of Determine Layer Dimensions and Nanocrystalline WC Sintered by the C4-669 Preparation of Conductive Interface Roughness for Multilayer Pulse Plasma Sintering (PPS) Microstructures by Combination of Coatings with Ultimate Accuracy Technique Photolithography and Direct Write D. Häußler (Sp), U. Ross, M. Rosinski (Sp), A. Michalski, J. Technology Christian-Albrechts-University of Kiel Szawnowski, Warsaw University of E. Pal, D. Lehmhus (Sp), Fraunhofer Institute (Germany); U. Heidom, F. Hertlein, J. Technology (Poland) for Manufacturing Technology and Applied Wiesmann, Incoatec GmbH, Geesthacht Materials Research, Bremen (Germany); E. (Germany); W. Jäger, C4-303 Synthesis and Structure-Activity Tolstosheeva, H. Sturm, W. Lang, University of Christian-Albrechts-University of Kiel Relationship of Several Novel Bremen (Germany) et al. (Germany) Two-Photon Initiators based on a D-pi-A-pi-D Chromophore C4-670 Low Temperature Processable D1-343 Real and Magnetic Structure Z. Li (Sp), M. Siklos, N. Pucher, K. Cicha, A. Dielectric Films for Printed Electronics investigation of FSMAs with the Aid Ajami, W. Husinsky, J. Stampfl, R. Liska, Applications of TEM Vienna University of Technology, Wien T. Lehnert (Sp), J. Adam, R. Herbeck-Engel, R. B. Erkartal (Sp), A. Lotynk, C. Bechtold, E. (Austria) Drumm, M. Veith, Leibniz Institute for New Quandt, Christian-Albrechts-University of Kiel Materials, Saarbrücken (Germany) (Germany) C4-308 Functional Gradation of Ceramic Materials in Three Dimensions Using C4-789 Microstructure and Surface D1-637 Textures in the Multi-Directional Additive Manufacturing Techniques Roughness of Ti-6Al-4V Built with Forged Commercial Mg Alloys D. Polsakiewicz (Sp), W. Kollenberg, Different Settings of EBM System W. Gan (Sp), H.-G. Brokmeier, M.Y. Zheng, H. Hochschule Bonn-Rhein-Sieg, Rheinbach A. Safdar (Sp), H.Z. He, L.Y. Wei, Malmö Chang, K. Wu, C. Randau, GKSS Outstation at (Germany) University (Sweden); A. Snis, Arcam AB, FRM-II, Garching (Germany) Mölndal (Sweden); L.E.C. de Paz, Malmö C4-341 New Components for the Rapid University (Sweden) D1-673 Failure Mechanism in Presence of Manufacturing Technology of the Reinforcing Phase in Dual Phase 3D-printing Steels J. Presser (Sp), C. Kottlorz, G.P. Hellmann, J. Kadkhodapour (Sp), S. Ziaei Rad, S. Technical University of Darmstadt (Germany) Schmauder, University of Stuttgart (Germany)

C4-355 Flexible Optical WaveGuides via D1-792 Characterisation of Inclusions in an Two-Photon Polymerization As-Cast Carbon Steel J. Kumpfmüller (Sp), R. Inführ, K. Stadlmann, M. Faraji (Sp), R. Thackray, I. Todd, P. K. Cicha, Vienna University of Technology Tsakiropoulos, The University of Sheffield (Austria); V. Satzinger, V. Schmidt, Joanneum (UK) Research Institute of Nanostructured Materials and Photonics, Weiz (Austria) et al. D1-828 Microstructural Evolution in Cast Iron Cylinder Heads under C4-382 MgB2 Superconducting Ceramic Thermo-Mechanical Fatigue Produced by Different Processes S. Ghodrat (Sp), J. Sietsma, M. Janssen, L.A.I. G. Aldica, C. Plapcianu, P. Bafica, I. Ivan (Sp), Kestens, Delft University of Technology National Institute of Materials Physics, (Netherlands) Magurele (Romania); M. Trucatto, A. Agostino, S. Cagliero, E. Bonometti, University of Torino (Italy) et al.

40 Postersession - On Display Tuesday through Thursday

Topic: D - Characterisation

New Techniques D2-494 Inverse Analysis of Material D3-59 In-Situ X-Ray Absorption Parameters Based on Non-Standard oral poster Spectroscopy of LiFePO4 under Tests Different Electrochemical Conditions D2-26 Atom Probe of Nitrogen-Doped X.X. Su (Sp), F. Elkut, F. Finlay, I. Jenkinson, S. Suzuki (Sp), K. Inoue, S. Fujieda, K. Chemical-Vapor-Deposition X.J. Ren, Liverpool John Moores University Shinoda, Tohoku University, Sendai (Japan) Diamond Films (UK) T. Liu (Sp), D. Raabe, P. Choi, Max Planck D3-116 Digital Holographic Microscopy for Institute for Iron Research, Düsseldorf D2-522 The Cold Two-Circle Diffractometer oral poster Integrity Study of Small-Scale (Germany) MIRA at the FRM II Systems R. Georgii, J. Repper (Sp), G. Brandl, R. Y.W. Lai (Sp), N. Koukourakis, N.C. Gerhardt, M.R. Hofmann, R. Meyer, S. Hamann, M. D2-127 High-Throughput Schwikowski, P. Böni, Technical University of Ehmann, A. Ludwig, Ruhr-University of Temperature-Dependent Structural Munich, Garching (Germany) Bochum (Germany); E. Darakis, Hellenic Civil Investigation of a Quaternary Aviation Authority, Ghania (Greece) Ti-Ni-Cu-Pd Shape Memory Alloy D2-539 REFSANS, a Polyvalent Instrument for Composition Spread Using Neutron Reflectometry and GISANS Microfocused Synchrotron X-ray J.-F. Moulin (Sp), R. Kampmann, M. D3-132 In Situ Measurement of the R. Zarnetta (Sp), M.L. Young, G. Eggeler, A. Haese-Seiller, M. Pomm, A. Schreyer, GKSS oral poster Piezoelectric Properties at High Ludwig, Ruhr-University of Bochum Research Centre, Garching (Germany) Temperatures on Bismuth Based (Germany); Y.S. Chu, Argonne National High Temperature Piezoelectrics Laboratory, Argone (USA); R. Takahashi, I. T. Leist (Sp), W. Jo, T. Granzow, E. Aulbach, D2-577 Pulsed Laser Welding of Technische Universität Darmstadt (Germany); J. Takeuchi, University of Maryland, College Park Nickel-Titanium Alloy to Stainless (USA) Chen, University of Science and Technology Steel, for Medical Industry Devices Beijing (China); J. Rödel, Technische J. Vannod (Sp), A. Hessler-Wyser, M. Rappaz, Universität Darmstadt (Germany) D2-165 Quality Characterization of Ecole Polytechnique Fédérale de Lausanne Composite Material Pipes by (Switzerland) Thermographic Inspection D3-137 Fatigue and Crack Growth in a A. Mihai (Sp), F. Stefanescu, G. Neagu, V. oral poster Precipitation Hardening Aluminium D2-589 Materials Research at the Institut Alloy Processed by Equal-Channel Rindasu, P. Funar, University Politehnica of Laue-Langevin (ILL) Grenoble Bucharest (Romania) Angular Pressing P. Lindner (Sp), T. Pirling, T. Hansen, Institut K. Hockauf (Sp), M. Hockauf, T. Halle, T. Laue-Langevin, Grenoble (France) Lampke, Chemnitz University of Technology D2-225 Imaging Techniques as Tools for (Germany) Studying the Ageing Behaviour of D2-609 Nanofocussed Synchrotron PP-Pipes Radiation in Materials Science R. Maria (Sp), R. Brüll, K. Rode, G. Geertz, M. Müller (Sp), GKSS Forschungszentrum D3-141 Size Effects in Upscaling of Deutsches Kunststoff-Institut Darmstadt Geesthacht GmbH (Germany); C. Krywka, Equal-Channel Angular Pressing (Germany); R. Kleppinger, DSM-Resolve, MD University of Kiel (Germany) with Focus on Mechanical Properties Geleen (Netherlands); J. Wüst, K. Engelsing, M. and Microstructure Wenzel, SKZ, Würzburg (Germany) P. Frint (Sp), T. Halle, Chemnitz University of D2-741 Synthesis of Al/C Composites under Technology (Germany); G. Strehl, S+C Märker Molten Salts GmbH Steel Technologies, Lindar (Germany); D2-279 3D EDX Microanalysis by FIB-SEM : P. Baumli (Sp), J. Sytchev, I. Budai, G. Kaptay, T. Lampke, M. Wagner, M. Hockauf, Chemnitz Enhancement of Elemental Bay Zoltán Foundation for Applied Research, University of Technology (Germany) Quantification Miskolc (Hungary) M. Cantoni, P. Burdet, EPFL, Lausanne D3-146 An Approach and Application for (Switzerland); C. Hébert (Sp), Ecole D2-756 In situ X-Ray Diffraction Synchrotron oral poster Anisotropic Material Modelling on Polytechnique Fédérale de Lausanne Study of an Advanced ODS Ferritic (Switzerland) Sheet Metals Including Strain Rate Steel during Tensile Deformation and Bauschinger Effect J. Zimmermann (Sp), A. Froideval, M.A. B. Zillmann (Sp), T. Halle, Chemnitz University D2-320 FIB Damages in the Fabrication of Pouchon, S. Van Petegem, J. Chen, B. Schmitt, of Technology (Germany); L.W. Meyer, Free-Standing Micro-Pillars and an J.H. Leber, H. Van Swygenhoven, W. Hoffelner, Nordmetall GmbH, Adorf (Germany); T. Alternative Preparation to FIB Milling Paul Scherrer Institute, Villigen (Switzerland) Lampke, Chemnitz University of Technology C. Marichal (Sp), J. Zimmermann, S. Van (Germany) Petegern, C. Borca, Paul Scherrer Institut, Villigen (Switzerland); C. Hébert, EPFL, Lausanne (Switzerland); V. Guzenko, H. Van D3-163 In-Situ Investigation of Lithium Insertion into CuCr2Se4 Spinel Swygenhoven, Paul Scherrer Institut, Villigen Characterisation of Material oral poster (Switzerland) Properties H. Hain (Sp), R. Moenig, D. Chen, H. Gesswein, P. Gruber, Karlsruhe Insitute of Technology (Germany); J. Ophey, W. Bensch, University of D2-365 Perspectives for Materials Kiel (Germany); S. Indis, Karlsruhe Insitute of Investigations at the Structured Pulse D3-45 Experimental Researches on the Technology (Germany) Engineering Spectrometer (SPES) oral poster Evolution of some Parameters R. Kampmann (Sp), GKSS Research Centre, S.-D. Mácutá, Dunarea de jos University of D3-202 Testing Thermal Barrier Coatings by Geesthacht (Germany); V. Kudryashov, Galati (Romania) Petersburg Nuclear Physics Institute (PNPI), St. oral poster Laser Excitation Petersburg (Romania); M. Haese-Seiller, P. D3-46 Study of the Inner D. Nies (Sp), B. Rehmer, S. Glaubitz, M. Finn, B. Skrotzki, Federal Institute for Materials Staron, GKSS Research Centre, Geesthacht oral poster Microdeformations in the Rolling (Germany) et al. Tribosystem Research and Testing, Berlin (Germany) S.-D. Mácutá (Sp), C. Gheorghies, Dunarea de jos University of Galati (Romania)

41 Postersession - On Display Tuesday through Thursday

Topic: D - Characterisation

D3-210 Manufacturing of a Beta-Titanium D3-414 3D Microstructural Characterization D3-694 Inverse Problem for Micro Structural oral poster Hollow Shaft through Incremental oral poster and Modeling of Deformation in oral poster Dimension Scales Forecasting in Forming Metal Matrix Composites Ultrasonic Material Characterisation S. Fritsch (Sp), T. Halle, M. Wagner, Chemnitz J. Williams, N. Chawala, Arizona State F. Bettayeb, Research Center on Welding and University of Technology (Germany); C. John, University, Phoenix (USA); F. de Carlo, Control, Algiers (Algeria) M. Popp, R. Neugebauer, Fraunhofer Institute Argonne National Laboratory (USA); B. Müller, for Machine Tools and Forming Technology M. Hentschel, P.D. Portella (Sp), Federal D3-738 Strain Rate Sensitivity of IWU, Chemnitz (Germany) Institute for Materials Research and Testing, oral poster Nanocrystalline Materials as Berlin (Germany) Measured by Compression Test and D3-253 Investigation of Flow Stress and Nanoindentation Texture of AA7075 Aluminum Alloy D3-442 Microstructure and Mechanical K. Durst (Sp), V. Maier, M. Göken, University after Extrusion and Equal-Channel oral poster Properties of Multi Component of Erlangen-Nürnberg (Germany) Angular Pressing Aluminium Sheets Produced by S. Wagner (Sp), M.F.-X. Wagner, M. Hockauf, Accumulative Roll Bonding D3-749 Characterisation of Electrodeposited Chemnitz University of Technology (Germany) T. Hausöl (Sp), H.W. Höppel, M. Göken, oral poster Nickel/Ceramic Nanocomposites by University Erlangen-Nuremberg (Germany) Mechanical Spectroscopy D3-265 Microstructure of a Metastable H.-R. Sinning (Sp), Braunschweig University oral poster Austenitic Cast CrMnNi – TRIP Steel D3-462 Deformation Mechanism and of Technology (Germany); G. Vidrich, W. after Compressive Deformation oral poster Microstructural Evolution in Rieheman, Technical University of Clausthal S. Martin (Sp), L. Fuhrmann, D. Rafaja, U. Nanocrystalline Pd and Pd Alloys (Germany) Martin, S. Wolf, L. Krüger, Technical University C. Kübel (Sp), L. Kurmanaeva, T. Scherer, J. of Freiberg (Germany) Ivanisenko, Karlsruher Institute of Technology, D3-827 Elementary Transformation and Eggenstein-Leopoldshafen (Germany) Deformation Processes and the D3-300 Calculation of S,N-Curves for Different Cyclic Stability of NiTi and NiTiCu Shape Memory Spring Actuators oral poster Mean Stress Ratios on the Basis of D3-540 Oxidation Behavior of Nickel-Base “PHYBALmean” for the Quenched oral poster Superalloys Fabricated by Metal J. Frenzel (Sp), C. Grossmann, T. Depka, G. and Tempered Steel SAE 4140 Injection Molding Eggeler, Ruhr-University Bochum (Germany) P. Starke (Sp), D. Eifler, University of B. Albert (Sp), U. Glatzel, University of Kaiserslautern (Germany) Bayreuth (Germany)

D3-316 Structure and Atomic Dynamics of D3-543 Some New Observations on the oral poster Refractory Al-Ni Melts oral poster Freckle Formation during Single D. Holland-Moritz (Sp), German Aerospace Crystal Solidification of Superalloys Center (DLR), Cologne (Germany); S. Stüber, D. Ma, Q. Wu (Sp), A. Bührig-Polaczek, RWTH Technical University of Munich, Garching Aachen University (Germany) (Germany); I. Egry, A. Meyer, German Aerospace Center (DLR), Köln (Germany) D3-583 Stress Evolution and Cracking of oral poster Brittle Polycrystalline Diamond Thin D3-336 Spatially Resolved Phase Analysis Film on Ductile Ti-Substrate: Analysis by Micro-Raman Spectroscopy and oral poster and Piezo-Spectroscopic Measurement of Residual Stresses in Cohesive Zone Finite Element Zirconia Modelling A. Renz, Fraunhofer Institute for Mechanics of F. Ahmed (Sp), H. Rehman, K. Durst, M. Materials IWM, Freiburg, Germany Göken, University of Erlangen-Nürnberg (Germany)

D3-349 Influence of Microstructure and D3-633 On the Role of Grain Size during Stress Induced Martensitic oral poster Hardness on Wear Behaviour at Different Temperatures Transformation in Ultrafine Grained M. Varga, H. Rojacz, C. Katsich (Sp), E. NiTi Shape Memory Alloys Badisch, AC2T Research GmbH, Wiener J. Burow (Sp), J. Fenzel, A. Schäfer, C. Neustadt (Austria) Somson, G. Eggeler, Ruhr University of Bochum (Germany) D3-360 Optimization Study on the Aging Treatment of B4C Reinforced D3-657 Low Cycle Fatigue Behaviour of the AA7064 Composites oral poster Ultrafine Grained Nickel Produced by T. Demir (Sp), M. Übeyl, E. Acar, TOBB Equal Channel Angular Pressing University of Economics and Technology, T. Qian (Sp), M. Marx, H. Vehoff, Saarland Ankara (Turkey) University, Saarbrücken (Germany) D3-683 The Characterization and Numerical D3-368 Fretting Fatigue of Engineering oral poster Modelling of Viscoelastic Foams for oral poster Ceramic with Variable Friction Custom Wheelchair Seating Strokes Applications C. Wörner (Sp), K.-H. Lang, Karlsruhe Institute C. Briody (Sp), B. Duignan, S. Jerrams, Dublin of Technology (Germany) Institute of Technology (Ireland)

42 Postersession - On Display Tuesday through Thursday

Topic: E - Modelling

Materials Processing E2-545 Continuous Casting of AZ31B E3-51 Some Aspects about the Kinetics and Magnesium Alloy Strip Usng Thermodynamic Transformations of Semisolid Slurry a Nickel-Copper Austempered Ductile E2-20 Calculation of Meta-Stable T. Motegi (Sp), F. Kido, Chiba Institute of Iron Precipitates Solvous Temperatures Technology, Narashino (Japan) I. Milosan, Transilvania University of Brasov and Modeling of Age-Hardening in (Romania) Al-Mg-Si Alloys E2-621 Technological Aspects of Intense A.A. Vasilyev (Sp), N.L. Kuzmin, A.S. Gruzdev, Pulsed Electron Beam Application for E3-90 Theoretical and Experimental Study St. Petersburg State Polytechnical University Properties Improvment and Repair of of Multiple Phase Transformations (Russian Federation) Gas Turbine Engine Blades during Solidification of Undercooled A. Novikov, A. Paikin, O. Bytzenko (Sp), Aluminum-Nickel Alloys Chernyshev Machine Building Enterprise, D. Tourret (Sp), T. Volkmann, D.M. Herlach, E2-66 New Model for Computation of Moscow (Russian Federation); D. Teryaev, German Aerospace Center, Köln (Germany); Carbon Diffusion Coefficient in Moscow Aviation Institute (Russian C.-A. Gandin, MINES ParisTech, Sophia Alloyed Austenite and Application to Federation) et al. Antipolis (France) Simulation of Gas Carburizing of Case Hardening Steels P. Golikov (Sp), A.A. Vasilyev, St. Petersburg E2-685 Processing & Characterization of E3-106 Microstructure Evolution during State Polytechnical University (Russian Polymeric Hydrogels & the Removal Creep of 12Cr Steels: Experimental Federation); J. Gegner, University of Siegen and of Hazardous Dye Malachite Green and Computer Simulations SKF GmbH, Material Physics, Schweinfurt, from Water J.L. Garcia (Sp), Helmholtz-Zentrum Berlin für (Germany) M.G. Gigimol (Sp), K.R. Dhanya, M. Beena, Materialien und Energie GmbH (Germany); D. Alphonsa College, Kottayam (India) Rojas, O. Prat, Max Planck Institute für Eisenforschung GmbH, Düsseldorf (Germany) et E2-102 Influence of the Post Compression E2-774 Effects of Addition of SiC and TiB2 al. Molding Annealing Temperature on Particles on Structural and Material Performance of Mechanical Properties of PM Al-Si E3-153 Grain Growth Mechanism in HX-UHMWPE Foams N. Stark (Sp), W. Schneider, B. Alcock, R. Nanocrystalline Materials: M. Seifi (Sp), Y. Tabatabaei, S.M.H. Multi-Phase Field and Molecular Klabunde, Zimmer GmbH, Winterthur Mirbagheri, Amirkabir University of (Switzerland) Dynamics Studies Technology, Tehran (Iran) R. Darvishi Kamachali (Sp), J. Hua, I. Steinbach, A. Hartmaier, Ruhr-University of E2-175 Effect of Magnesium Addition on E2-825 Remarks on the FeO/SiO2 System Bochum (Germany) Color and Mechanical Properties of Regarding the Adherence of Casted Silver for Ornaments Parts E3-284 An Improved Finite Element Model N. Jinguji, H. Takagi, H. Tamehiro (Sp), Chiba B.-A. Verdes (Sp), I. Chira, Politehnica Institute of Technology (Japan) for Numerical Simulation of Phase University of Bucharest (Romania) Changes of Iron E2-178 Application of Forward L. Écsi (Sp), P. Eleszts, K. Balázsová, Slovak E2-830 Synthesis and Characterization of University of Technology in Bratislava (Slovak Extrusion-Equal Channel Angular Bi-Metallic Nanoflakes Pressing (FE-ECAP) in Fabrication of Republic) C.F. Cerqueira Machado (Sp), V. Blondo, Aluminum Metal Matrix Composites P.W.C. Sarvezuk, G.S. Dias, Universidade B. Mani, M.H. Paydar, M. Jahedi (Sp), Shiraz Estadual de Maringá (Brazil); K.L. Silva, E3-287 Symmetry-Conforming Theory of University (Iran) Technische Universität Braunschweig Defect Reconfiguration Caused by (Germany) et al. Martensitic Phase Transformation E2-180 Consolidation of Al Powders by A. Kosogor (Sp), V.A. L‘vov, National Taras Utilizing the Torsion Extrusion (TE) Shevchenko University of Kyiv, Kiev (Ukraine) Process as a Severe Plastic Deformation Method E3-340 Kinetic Modelling of the Phase M. Jahedi (Sp), M.H. Paydar, Shiraz University Transformation of ZrO2 Dental (Iran) Ceramics at Human Body Temperature: a Combinatory Nucleation, Microstructure E2-291 Evaluation of Solid Fraction during Approach Using Micro-XRD, Evolution and Phase Solidification Using Novel Inverse Micro-Raman Spectroscopy and Transitions Cooling Curves Analysis Method Cathodoluminescence Microscopy. (ICCAM) M. Keuper (Sp), C. Berthold, Y. Hemberger, M.M. Jabbari Behnam (Sp), M. Mozammel, H. University of Tübingen (Germany); M. Tholey, Ghavami, S. Arfaee Z., Sharif University of E3-48 Modeling of Static Recrystallization VITA Zahnfabrik Rauter GmbH & Co KG, Bad Technology, Tehran (Iran) Kinetics in Complexly Alloyed Säckingen (Germany); K.G. Nickel, University Austenite of Tübingen (Germany) E2-398 Fabrication and Characterization of A. Vasilyev (Sp), N.G. Kolbasnikov, S.F. Sokolov, St. Petersburg State Polytechnical ZnO Doped Al by Mechanical E3-352 Crystallization and Structural Phase University (Russian Federation); E.I. Khlusova, Milling Transitions in Melt-spun Crism Prometey, St. Peretsburg (Russian S.A. Gad, M. Boshta (Sp), A.M. Abo El-Soud, Poly(vinylidene fluroide) Fibers Federation) National Research Center, Cairo (Egypt) W. Steinmann (Sp), S. Walter, T. Gries, G. Roth, G. Seide, RWTH Aachen University E2-523 Research on Quality Improvement of (Germany) Expanded Polystyrene Blocks Manufacturing I. Dreyer, O. Medne, L. Berzina (Sp), Riga Technical University (Latvia)

43 Postersession - On Display Tuesday through Thursday

Topic: E - Modelling Topic: F - Biomat

E3-521 Seed Induced Crystallization in Bio-Inspiration F1-332 Novel Hierarchical Ceramic-Polymer Colloidal Model Systems under Composites with Small Amounts of Microgravity Polymers P. Werre, Deutsches Zentrum für Luft- und F1-100 Electrospinning of Recombinant K. Brandt (Sp), V. Salikov, Hamburg University Raumfahrt, Köln (Germany); H.J. Schöpe (Sp), Spider Silk Protein of Technology (Germany); V. Filiz, V. Abetz, Johannes Gutenberg University Mainz G. Lang (Sp), T. Scheibel, University of GKSS Research Centre Geesthacht GmbH (Germany) Bayreuth (Germany) (Germany) et al.

E3-531 Quantitative Phase-Field Simulation F1-135 Alcoholate Corrosion of Aluminium F1-339 What are Hierarchies in Biological of the Dendritic Solidification in an in Alcohol Blended Biofuels oral poster Materials really good for? Al-10wt%Cu Atomized Melt Droplet K. Wagner (Sp), T. Troßmann, K. Eppel, C. S. Bechtle (Sp), G.A. Schneider, Hamburg A. Carré (Sp), B. Böttger, M. Apel, Access e.V., Berger, Technische Universität Darmstadt University of Technology (Germany) Aachen (Germany) (Germany) F1-431 The Pericarp of Citrus Maxima as a E3-532 Influence of Added Larger Spherical F1-139 Aerodynamically Optimized High Role Model for Impact Protection Particles on the Crystallization of a Temperature Coatings Inspired by Devices Charged Sphere Colloidal Model Shark Skin M. Thielen (Sp), C. Schmitt, T. Speck, R. System C. Büttner (Sp), M. Fröhlich, U. Schulz, German Seidel, University of Freiburg (Germany) A. Engelbrecht (Sp), H.J. Schöpe, Johannes Aerospace Center, Köln (Germany) Gutenberg University Mainz (Germany) F1-452 Mechanical Characterization of F1-191 Structure and Mechanical Properties Bio-Inspired Adhesive Polymers with E3-643 3-D Observation and Modeling of oral poster of Bio-Inspired Composites Made by Permanent, High Strength Adhesion Nucleation during Recrystallisation Gluing of Laponite and Copper S. Bundschuh (Sp), C. Eberl, O. Kraft, in a Heavily Deformed Fe-Ni Alloy Oxalate Particles Karlsruher Institute of Technology, F. Ram (Sp), S. Zaefferer, Max Planck Institute I. Zlotnikov (Sp), I. Dambovsky, H. Cölfen, H. Eggenstein-Leopoldshafen (Germany) for Iron Research GmbH, Düsseldorf (Germany) Schlaad, B. Aichmayer, Max Planck Institute of Colloids and Interfaces, Golm (Germany) F1-493 Arthropod Cuticle: a Biological E3-829 CFD Modeling of Macro-Shrinkage Multi-Functional Composite Used as and Shrinkage Porosities in A356 Template for Nano-to-Macro-Scale Castings F1-226 Mimicking Cellulose-Matrix Interactions in Plant Cell Walls to Hierarchical Modeling L. Nastac (Sp), Concurrent Technologies Create Technical Glass Fiber M. Friak (Sp), M. Petrov, S. Nikolov, C. Sachs, Corporation, Pittsburgh (USA); M. Nastac, D. Reinforced Polymer Composites H. Fabritius, P. Elstnerova, D. Ma, L. Maas, ExOne/ProMetal RCT, Pittsburgh (USA) J. K. Pandey (Sp), A. Bertin, H. Schlaad, I. Lymperakis, D. Raab, Max Planck Institute for Burgert, Max-Planck-Institute of Colloids and Iron Research GmbH, Düsseldorf (Germany); S. Interfaces, Potsdam, Golm (Germany) Hild, Johannes Kepler University Linz (Austria) et al. F1-268 Shark-Skin inspired Surface Engineering on Intermetallic Titanium F1-518 Modifications and Conjugations of Aluminides for High Temperature oral poster Spider Silk Proteins Applications Using the Fluorine Effect M. Humenik (Sp), T. Scheible, University of R. Pflumm (Sp), M. Schütze, Dechema e.V., Bayreuth (Germany) Frankfurt (Germany) F1-573 A renewable Source of Hydrated F1-274 Influence of Structural Organization Lime Nanoparticles and Mineral Distribution on the L. Chávez-Guerrero (Sp), M. Hinojosa, Local Mechanical Properties of Universidad Autonoma de Nuevo Leon, San Mineralized Cuticle from the Crab Nicolás de los Garza (Mexico) Cancer Pagurus H. Fabritius (Sp), Max Planck Institute for Iron F1-656 Measuring the Water Adhesion on Research GmbH, Düsseldorf (Germany); S. Hild, Structures of Biological Air Retaining K. Huemer, Johannes Kepler University, Linz Surfaces (Austria); D. Raabe, Max Planck Institute for A. Weis (Sp), A. Kaltenmaier, M. Barczewski, S. Iron Research GmbH, Düsseldorf (Germany) et Walheim, Karlsruhe Institute of Technology al. (KIT) (Germany); K. Koch, Hochschule Rhein-Waal, Kleve (Germany); M. Brede, A. F1-286 Hierarchical magnetic Leder, University of Rostock (Germany) et al. Nanostructures: Biogenic and Biomimetic Chains of Magnetite F1-696 Understanding the Development of J. Baumgartner, Max Planck Institute of oral poster Cracks in a Biomaterial: Mechanical Colloids and Interfaces, Potsdam; F. Müller, Characterisation of Whole Teeth and Ludwig-Maximilian-University Munich, Dentine at Different Hierarchical Planegg-Martinsried; M.A. Carillo (V), Levels Max-Planck-Institut für Kolloid- und A. Märten (Sp), Max Planck Institute of Grenzflächenforschung, Potsdam et al. Colloids and Interfaces, Golm (Germany); T. Traykova, Technical University Berlin (Germany); P. Zaslansky, Max Planck Institute of Colloids and Interfaces, Golm (Germany) et al.

44 Postersession - On Display Tuesday through Thursday

Topic: F - Biomat

Interfaces F5-64 In Vivo Writing Using F5-686 Influence of Cooling Rate on oral poster Two-Photon-Polymerization as an Microstructure and Properties of Enabling Technology for Making Ti-Mo and Ti-Mo-Sn Alloys for F3-63 Mechanical Properties: Collective Use of Bionispired Structures Biomedical Applications. Diffusion Coefficient in J. Torgersen (Sp), Vienna University of F. Farias Cardoso (Sp), M. Gerardi, R. Conieri, Thermosensitive Hydrogels Technology (Austria); A. Baudrimont, A. Cremasco, E.N. Lopes, R. Caram, University A.A. Naddaf (Sp), H.-J. Bart, Technical Biocenter Vienna (Austria); N. Pucher, K. of Campinas, Campinas, SP (Brazil) University of Kaiserslautern (Germany) Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl, Vienna University of Technology F5-832 New Bio-photopolymers with good F3-229 Comparison of Microbial and (Austria) biocompatibility for Tissue Abiotic-Chemical Corrosion of Silicon Engineering Nitride and Liquid-Phase Sintered F5-189 Biological Behavior and Corrosion of X. Qin (Sp), Vienna University of Technology Silicon Carbide Ceramics oral poster Prosthetic and Orthodontic Titanium (Austria); C. Heller, M. Schwentenwein, Vienna D. Dierksen (Sp), P. Kühner, A. Kappler, K.G. Implants University of Technology, Wien (Austria); F. Nickel, University of Tübingen (Germany) A.M. Nicolau (Sp), E. Vasilescu, Dunarea de jos Varga, Ludwig Boltzmann-Institute of University of Galati (Romania) Osteology, Wien (Austria) et al. F3-270 Defined Protein-Based Supramolecular Nano-Architectures F5-263 Sputtered Thin Films of S. Schiller (Sp), A. Schreiber, Biodegradable Mg Alloys Albert-Ludwig-University of Freiburg C. Zamponi (Sp), J.F. Reverey, K. Schlüter, E. (Germany) Quandt, Christian-Albrechts-University of Kiel (Germany) F3-537 Study on the Local Mechanical Properties of the Glass-Matrix F5-317 Structure and Mechanical Interface in Glass Ionomer Cements Characterization of Highly Porous and its Impact on the Macroscopic Titanium Scaffolds Fracture Toughness B. Dabrowski (Sp), W. Swieszkowski, Warsaw B. Brandt, U. Lohbauer, K. Durst (Sp), University of Technology (Poland); D. University of Erlangen-Nürnberg (Germany) Godlinski, Fraunhofer Institute for Manufacturing Technolgy, Bremen (Germany) F3-654 Ink-Jet Printing of Proteins and et al. Functional Nanoparticles for Automated (Bio)Functionalization of F5-439 Comparison of Mechanical Surfaces oral poster Properties of a Medical Spinal Bone A. Weber, J. Plankalayil, E. Hoch, K. Borchers Screw Under Different Design (Sp), Fraunhofer Institute for Interfacial Parameters Engineering and Biotechnology, Stuttgart T. Demir (Sp), TOBB University of Economics (Germany) and Technology, Ankara (Turkey); K. Türeyen, Medical Park Bursa Hospital (Turkey); H. Yetik, F3-740 Interfacial Phenomena in the Ag/Si Norm Spinal Systems Ltd., Sti. Ankara and Cu/Si Systems (Turkey) et al. P. Baumli (Sp), G. Lakatos, G. Kaptay, Bay Zoltán Foundation for Applied Research, F5-562 Glow Discharge Assisted Nitriding Miskolc (Hungary) Process of Titanium Alloy for Cardiovascular Applications T. Borowski, M. Ossowwski, T. Truszkowski (Sp), Warsaw University of Technology (Poland); A. Sowiska, E. Czamowska, The Biomaterial Applications Children's Memorial Health Institute, Warsaw (Poland); T. Wierzcho, Warsaw University of Technology (Poland) F5-37 XPS Studies of Magnesium Surfaces after Exposure to Dulbecco's F5-565 Improving of Osseointegration of Modified Eagle Medium, Hank's Diffusive Titanium Phosphide Layers Buffered Salt Solution, Simulated by Calcium Ion Implantation Body Fluid and Water T. Truszkowski (Sp), Warsaw University of D. Tie (Sp), D. Hoeche, F. Feyerabend, R. Technology (Poland); A. Sowiska, E. Willumeit, GKSS Forschungszentrum Czamowska, The Children's Memorial Health Geesthacht (Germany) Institute, Warsaw (Poland); T. Wierzcho, Warsaw University of Technology (Poland)

F5-599 Effects of Aging Heat Treatment on oral poster Phase Transformation in Plastic Deformed Ti-35Nb and Ti-35Nb-4Sn Alloys A. Cremasco (Sp), E.S.N. Lopes, R.J. Contieri, F.F. Cardoso, G.C. Durante, R. Caram, University of Campinas, Campinas, SP (Brazil)

45 Postersession - On Display Tuesday through Thursday

Miscellaneous

0.0-21 Texture Evolution and fcc/hcp Transformation in Polycrystalline Fe-Mn-Si-Cr Alloys S. Suzuki (Sp), E.P. Kwon, S. Fujieda, K. Shinoda, Tohoku University, Sendai (Japan)

0.0-344 Photoelectric and Optical Properties of C60/Si Heterostructure V. Kozachenko (Sp), S.V. Kondratenko, Y.Y. Melnichuk, Kyiv Taras Shevchenko National University, Kiev (Ukraine)

0.0-444 POLDI - Neutron Diffractometer at PSI for Engineering Materials Research on Modern Steels H. Van Swygenhoven-Moens (Sp), S. Van Petegern, A.D. Evans, Paul Scherrer Institute, Villigen (Switzerland)

0.0-484 Stability of LiPF6 and Other Electrolyte Salts for the Use in Lithium/Oxygen Batteries A. Fiedler (Sp), F. Scheiba, S. Oswald, H. Ehrenberg, Leibniz Institute for Solid State and Materials Research Dresden (Germany)

0.0-615 Multifunctional Energy nanoconverter Y.M. Wang (Sp), X. Wang, A.V. Hamza, Lawrence Livermore National Laboratory (USA)

0.0-679 First-Principles Calculations on the Tendency of Demixing in the PZT Solid Solution System S. Hayn (Sp), K. Albe, Technische Universität Darmstadt (Germany)

0.0-730 High-Surface Area Carbon-Rich SiCN Polymer-Derived Ceramics with Tunable Micro- and Mesoporous Structure R.M. Prasad (Sp), G. Mera, A. Gurlo, R. Riedel, Technische Universität Darmstadt (Germany)

46 List of Authors

A Anselmi-Tamburini, U. Thu 10:15 Baufeld, B. Thu 12:40 Abdeen, Z.I. Tue 17:00 Ansorge, E. A2-751 Baumann, T. Tue 14:30 Abdulkadhim, A. Tue 11:20 Anten, K. Tue 17:00 Baumann, T.F. Tue 15:30 Abdurakhmanov, A. Wed 17:20 Antipov, E. Tue 17:20 Baumer, M. Tue 15:50, A3-246 Abetz, C. Thu 09:15 Anton, E.-M. A2-383 Baumgartner, J. F1-286 Abetz, V. F1-332 Antonyuk, S. F1-332 Baumli, P. D2-741 Abetz, V. Thu 09:15 Apel, M. E3-531 Baumli, P. F3-740 Abibe, A.B. C3-553 Apel, M. Tue 11:40 Bauser, S. Thu 12:00 Abo El-Soud, A.M. E2-398 Apel, M. Wed 16:40 Bayraktar, F.S. Thu 12:40 Acar, E. D3-360 Appel, F. B1-272 Beausir, B. Thu 10:35 Ackelid, U. B1-53 Appel, F. B1-299 Bechtle, S. Wed 12:00, F1-339 Ackelid, U. Thu 14:00 Appel, F. Thu 10:15 Bechtold, C. A2-470 Adachi, Y. Wed 09:30 Appel, F. Thu 14:40 Bechtold, C. D1-343 Adam, F. C3-254 Appel, F. Thu 15:20 Beck, G. D1-18 Adam, J. C4-670 Arfaee Z., S. E2-291 Beck, U. Thu 10:35 Adam, M. C4-162 Arora, K.S. Wed 15:30 Becker, S. Wed 09:10 Adam, M. Wed 10:40 Aschauer, U. Wed 14:50 Beckmann, F. Tue 17:20 Adams, P. Wed 08:50 Asghar, Z. Thu 14:20 Beckmann, F. Wed 09:30 Addison, A. Wed 15:50 Atanga, V.K. Thu 11:40 Beckmann, F. Wed 16:40 Adelung, R. A2-480 Aulbach, E. Wed 15:50, Beckmann, F. Thu 15:00 Aegerter, J. Thu 14:00 Autenrieth, H. WedD3-132 17:40 Bednarz, P. Tue 10:40 Agarwal, S. Tue 17:40 Averback, R.S. Tue 17:40, C1-600 Beena, M. E2-685 Agostino, A. C4-382 Behr, W. Wed 17:20 Agrawal, D. Thu 12:20 B Bei, H. Wed 11:40 Aguilar, J. B1-593 Backhaus, A. Thu 11:40 Bellini, J.V. E2-830 Aguilar, J. Thu 09:55 Badisch, E. Wed 12:00, Benfer, S. Wed 08:30 Ahmed, F. Wed 15:50, Badisch, E. ThuD3-349 10:15 Bensch, M. B6-489 Ahmed, N. B6-277D3-583 Bähre, D. B6-94 Bensch, W. Tue 12:00, D3-163 Ahn, Y.-S. B6-54 Baehtz, C. Tue 12:00, C2-297 Beresnev, A. B1-667 Aichmayer, B. Wed 12:00, F1-191 Baehtz, C. Tue 11:40 Berger, C. F1-135 Ajami, A. C4-303 Baehtz, C. Thu 09:55 Berger, C. Tue 18:00, C2-119 Ajayan, P.M. Tue 11:20 Bäumer, M. Wed 10:40 Berger, C. Tue 15:30, C2-118 Akbarzadeh, J. Tue 15:50, A3-154 Bäurer, M. Wed 15:30 Berger, G. Tue 17:40 Al-Samman, T. B6-237 Bafica, P. C4-382 Berghammer, R. Tue 14:30 Albe, K. B6-680 Bahr, J. Tue 11:40 Bergmann, I. Wed 09:10 Albe, K. B4-142 Baikov, A.A. B6-429 Bergmann, L. Wed 14:30 Albe, K. 0.0-679 Bakradze, G. Thu 10:15 Bernard-Granger, G. Thu 10:35 Albert, B. Wed 12:00, Balasundaram, K. F1-274 Berneel, E. Tue 11:40 Alcock, B. E2-102D3-540 Balázsová, K. E3-284 Bernhard, C. Thu 14:20 Aldica, G. C4-382 Balkenhol, M. Thu 10:35 Bernthaler, T. Wed 11:40 Alig, I. Tue 17:40 Ballweg, T. Wed 08:50 Berthold, C. E3-340 Alimardani, M. Wed 09:10 Balog, M. B5-682 Berthold, C. Wed 15:50 Allahkaram, S.R. C2-824 Barbani, N. Tue 11:20 Bertin, A. F1-226 Allahkaram, S.R. C2-826 Barczewski, M. F1-656 Berzina, L. E2-523 Allan, I.U. Tue 15:30 Bardong, J. Tue 10:40 Bettayeb, F. Tue 12:00, D3-694 Altindis, M. Tue 17:40 Barnoush, A. B1-664 Beyer, K. Wed 08:30 Amancio, S. C3-549 Barnoush, A. Tue 11:40 Beyer, K. Wed 11:00 Amancio, S. C3-553 Barrales-Mora, L. Thu 14:00 Bhamji, I. Wed 15:50 Amesöder, S. Wed 17:00 Barsoum, M.W. Tue 12:00, C2-498 Bhanu Sankara Rao, K. Tue 15:50 Aneziris, C. Thu 10:35 Barsukova, T. Tue 14:50 Bidan, C. Tue 18:00 Aneziris, C.G. B3-634 Bart, H.-J. F3-63 Biederman, H. A4-755 Aneziris, C.G. B3-630 Barthel, M. Wed 12:00 Biener, J. Tue 15:50, A3-246 Aneziris, C.G. Thu 09:15 Barthlott, W. F1-656 Biener, J. Tue 14:30 Aneziris, C.G. Thu 10:15 Barthlott, W. Wed 15:50 Biener, J. Tue 15:30 Ang, S.F. Wed 09:50 Bartsch, M. B1-338 Biener, M. Tue 15:50, A3-655 Ansart, F. Wed 09:30 Bauch, J. Tue 15:30, C1-596 Biermann, H. B3-634 Anselmi-Tamburini, U. C4-421 Baudrimont, A. Tue 18:00, F5-64 Biermann, H. Tue 11:00 Anselmi-Tamburini, U. Thu 09:15 Bauer, A. Thu 15:00 Biermann, H. Wed 14:50

This list indicates the presentation time (for example: Wed. 11:40 = Wednesday, 11:40 h) and / or the poster reference number (for example: C3-553 = Symposium C3, Poster: 553). Listed are speakers as well as co-authors.

47 List of Authors

Biermann, H. Thu 15:00 Brosius, A. Wed 12:00 Cardoso, F.F. Tue 18:00, F5-599 Bill, J. Wed 09:30 Bruckner, G. Tue 10:40 Carillo, M.A. F1-286 Bischoff, E. Tue 15:30 Brücker, C. A3-345 Carré, A. E3-531 Bitar, M. Thu 14:00 Brüll, R. D2-225 Castrup, A. Wed 08:30 Bittencourt, L.R.M. Thu 10:35 Brünnet, H. B6-94 Cerqueira Machado, C.F. E2-830 Bjelic, M. C3-447 Bruinink, A. Thu 14:00 Chadov, S. Tue 11:40 Bjelic, M. Wed 17:40 Brunner, M. B6-489 Chai, F. Thu 10:35 Bleck, W. B5-372 Bruns, N. Wed 16:40 Chakravadhanula, V.S.K. B1-593 Bleck, W. B5-403 Brynk, T. F5-317 Chakravadhanula,, V.S.K. A4-567 Bleck, W. B5-435 Budai, I. D2-741 Chakravadhanula, V.S.K. A2-576 Bleck, W. Tue 14:50 Bührig-Polaczek, A. B5-305 Chakravadhanula, V.S.K. Tue 18:00 Bleck, W. Tue 15:30 Bührig-Polaczek, A. B6-538 Chakravadhanula, V.S.K. Thu 09:35 Bleck, W. Wed 16:40 Bührig-Polaczek, A. Wed 9:50, D3-543 Chang, H. D1-637 Bleck, W. Wed 17:20 Bührig-Polaczek, A. Tue 16:40 Chatzistavrou, X. Wed 18:00 Bleck, W. Thu 14:20 Bührig-Polaczek, A. Tue 17:40 Chávez-Guerrero, L. F1-573 Bleck, W. Thu 15:00 Bührig-Polaczek, A. Wed 09:30 Chawala, N. Wed 15:50, Blondo, V. E2-830 Bührig-Polaczek, A. Wed 17:00 Chemova, L. B1-338D3-414 Blüm, M. Tue 18:00, C2-650 Bührig-Polaczek, A. Wed 17:20 Chen, D. Tue 12:00, D3-163 Boccaccini, A.R. Tue 11:20 Bührig-Polaczek, A. Thu 12:40 Chen, J. D2-756 Boccaccini, A.R. Wed 18:00 Büth, H. Thu 09:55 Chen, J. Wed 15:50, Böhner, A. Tue 15:50 Büttner, C. F1-139 Chen, J. TueD3-132 16:40 Böni, P. D2-522 Buffet, A. Wed 11:20 Chern, M.-Y. C1-821 Bösenberg, U. Thu 15:00 Buffiere, J.Y. Wed 15:10 Chichkov, B. Thu 15:00 Böttger, B. E3-531 Buhr, K. Thu 09:15 Chikwanda, H.K. C4-169 Bogner, S. Wed 17:00 Bundschuh, S. F1-452 Chira, I. E2-825 Boller, E. Thu 14:20 Burbach, T. B5-305 Chiu, Y.L. Thu 12:00 Bonometti, E. C4-382 Burbach, T. Tue 16:40 Chmelik, D. C4-519 Borany, J.V. Thu 09:55 Burbach, T. Thu 12:40 Chmelik, D. Tue 17:20 Borca, C. D2-320 Burdet, P. D2-279 Choi, P. D2-26 Borca, C. Wed 11:40 Burgert, I. F1-226 Choi, P. Thu 12:00 Borchers, K. F3-654 Burgert, I. Wed 18:00 Christ, H.-J. Tue 15:10 Borowski, T. B6-563 Burghammer, M. Wed 11:20 Christ, H.-J. Wed 17:00 Borowski, T. F5-562 Burkel, E. C4-162 Christ, H.-J. Wed 18:00 Borschel, C. Tue 15:30, C2-533 Burkel, E. Tue 17:00 Christ, H.-J. Thu 15:20 Bortel, E.L. Wed 09:50 Burow, J. D3-633 Chu, Y.S. D2-127 Boschetti-de-Fierro, A. Thu 09:15 Burow, J.A. Tue 15:10 Chulist, R. Thu 10:35 Boshta, M. E2-398 Bursikova, V. Tue 18:00, C2-348 Cicha, K. C4-303 Boucher, R. Tue 15:30, C1-596 Buschbeck, J. A2-470 Cicha, K. C4-355 Boucher, R. Wed 12:00 Busse, M. C4-669 Cicha, K. Tue 18:00, F5-64 Brabie, V. Thu 09:35 Busse, M. Wed 9:50, C1-665 Cicha, K. Thu 15:00 Bradbury, W. Thu 09:35 Busse, M. Thu 14:40 Ciric, D. C3-370 Bram, A. Tue 17:00 Butnariu, D. Wed 9:50, B2-155 Clark, M. Thu 12:40 Brandl, G. D2-522 Butnariu, I. Wed 9:50, B2-155 Clarke, S.J. Wed 08:50 Brandstetter, S. Tue 17:40 Butnariu, I. Wed 9:50, B2-155 Clasen, S. Thu 12:00 Brandt, B. F3-537 Buyakova, S. B6-181 Claussen, N. Tue 12:45 Brandt, K. F1-332 Bytzenko, O. E2-621 Clemens, H. Thu 11:20 Brecher, C. Thu 09:55 Clemens, H. Thu 11:40 Brede, M. F1-656 C Cölfen, H. Wed 12:00, F1-191 Brede, M. Wed 15:50 Cabana, J. Wed 08:50 Conieri, R. F5-686 Bremer, S. B5-474 Cagliero, S. C4-382 Conrad, U. Thu 10:15 Bretcanu, O. Wed 18:00 Calcagnotto, M. Wed 09:30 Conradt, R. Wed 16:40 Brillo, J. A2-594 Calin, M. Thu 14:40 Conradt, R. Wed 17:40 Briody, C. Wed 18:00, Camagu, S.T. B1-335 Contieri, R.J. Tue 18:00, F5-599 Brojanowska, T. B6-563D3-683 Cantoni, M. D2-279 Corbin, S. Wed 09:10 Brokmeier, H.-G. D2-365 Cao, S. Wed 18:00 Cornelissen, R. Tue 11:40 Brokmeier, H.-G. D1-637 Cappi, B. Tue 18:00, C2-605 Counts, W.A. B6-463 Brose, A. A2-751 Caram, R. F5-686 Cremasco, A. F5-686 Brose, C. Thu 14:00 Caram, R. Tue 18:00, F5-599 Cremasco, A. Tue 18:00, F5-599

48 List of Authors

Cristallini, C. Tue 11:20 Dobatkin, S. B6-429 Eckert, J. B4-423 Cunha Neto, J.A.B. A3-67 Domann, G. Tue 11:40 Eckert, J. Tue 16:40 Cwiekala, T. Wed 12:00 Domitner, J. Wed 08:50 Eckert, J. Wed 11:00 Czamowska, E. F5-562 Donat, B. Thu 12:20 Eckert, J. Wed 15:30 Czamowska, E. F5-565 Donath, T. Wed 09:30 Eckert, J. Thu 14:40 Czekaj, I. Wed 09:50 Dopita, M. B6-429 Écsi, L. E3-284 Czempura, G. C2-757 Dopita, M. Tue 12:00, C2-297 Eeman, M. Tue 15:30 Dopita, M. Tue 11:40 Eggeler, G. D2-127 D Dopita, M. Tue 17:20 Eggeler, G. D3-633 Da, N. Wed 14:30 Dornheim, M. Thu 15:00 Eggeler, G. D3-827 Dabrowski, B. F5-317 dos Santos, J.F. C3-549 Eggeler, G. Tue 15:10 Dambovsky, I. Wed 12:00, F1-191 dos Santos, J.F. C3-553 Eggeler, G. Thu 12:40 Danilov, V. Tue 17:20 dos Santos, J.F. Wed 14:30 Eggert, S. Thu 09:35 Dapiaggi, M. Thu 09:15 Dos Santos, V.S.S. A3-67 Egry, I. A2-594 Darakis, E. Wed 15:50, Dose, T. Wed 16:40 Egry, I. Wed 9:50, D3-316 Darvishi Kamachali, R. E3-153D3-116 Drabik, M. A4-755 Ehmann, M. Wed 15:50, David, C. Wed 09:30 Drahokoupil, J. B1-660 Ehrenberg, H. B4-423D3-116 Davut, K. Tue 11:20 Drahus, M.D. Tue 12:00, A2-319 Ehrenberg, H. 0.0-484 de Carlo, F. Wed 15:50, Dreibati, O. B3-351 Eichel, R.-A. Tue 12:00, A2-319 de la Peña-Alonso, R. WedD3-414 9:50, C1-764 Drescher, V. Tue 15:30, C2-533 Eichlseder, W. Thu 15:20 de Paz, L.E.C. C4-789 Drevermann, A. B1-593 Eickemeyer, J. B6-318 Declercq, H. Tue 11:40 Drewello, V. Tue 11:20 Eifler, D. Wed 18:00, Deges, J. B1-534 Dreyer, I. E2-523 Eifler, D. WedD3-300 15:10 Degischer, H.P. B5-682 Dringen, R. Thu 12:00 Eifler, D. Wed 17:40 Degischer, H.P. Wed 17:20 Dronskowski, R. Thu 09:15 Eiken, J. Tue 11:40 Degischer, H.P. Thu 11:40 Drumm, R. C4-670 Eiken, J. Wed 16:40 Degischer, H.P. Thu 14:20 Drummer, D. Wed 17:00 Eisenlohr, P. Thu 10:35 Dehm, G. Thu 08:30 Dubruel, P. Tue 11:40 El Mahallawi, I. A4-42 Dehm, G. Thu 11:40 Dudczig, S. B3-630 El Mahallawi, I. Tue 17:40, C1-43 Demir, E. Wed 17:00 Dudczig, S. Thu 10:15 El-Aziz, A. Wed 16:40 Demir, T. D3-360 Dudczig, S. Thu 10:35 El-Chaikh, A. Thu 15:20 Demir, T. Tue 18:00, F5-439 Dudka, A. Wed 11:00 Elbahri, M. Tue 18:00 Demirkyi, D. Thu 12:20 Dudzik, E. Wed 15:10 Eleszts, P. E3-284 Denis, S. Wed 14:30 Dugas, R. Wed 09:30 Elhami, N.-N. Tue 11:40 Depentori, F. Wed 08:30 Duignan, B. Wed 18:00, Elkut, F. D2-494 Depka, T. D3-827 Dunin-Borkowski, R.E. WedD3-683 14:50 Ellermeier, J. Tue 15:30, C2-118 Depner, U. Tue 15:30, C2-118 Dunlop, J. Tue 18:00 Elrefaey, A. Thu 09:55 Deriy, A. Tue 14:30 Dunlop, J.W.C. Wed 17:40 Elstnerova, P. F1-493 Deschaux-Beaume, F. Thu 14:00 Duppel, V. D1-312 Emmerich, H. B3-373 Desmet, T. Tue 11:40 Duppel, V. B1-593 Emmerich, H. Tue 15:10 Deuchert, M. Wed 17:40 Durante, G.C. Tue 18:00, F5-599 Emmerich, H. Tue 16:40 Dhanya, K.R. E2-685 Durschang, B. Wed 17:00 Endler, I. Tue 17:20 Di Michiel, M. Thu 11:40 Durst, K. F3-537 Endres, K. Wed 11:40 Dias, G.S. E2-830 Durst, K. B1-57 Engelbrecht, A. E3-532 Dick, A. B5-507 Durst, K. C2-457 Engelbrecht, A. Tue 12:00 Dick, A. Tue 16:40 Durst, K. Tue 18:00, D3-738 Engelko, V. E2-621 Dick, A. Thu 09:35 Durst, K. Wed 15:50, Engelsing, K. D2-225 Dick, A. Thu 09:55 Dusza, J. C2-757D3-583 Englert, M. Tue 16:40 Diegeler, A. Wed 17:00 Duszová, A. C2-757 Ennen, I. Tue 12:00, A2-466 Diemer, R. Thu 12:40 Ensinger, W. Tue 15:10 Dierksen, D. F3-229 E Entel, P. A2-566 Dimitrieva, O. Thu 12:00 Eberl, C. B6-359 Enzinger, N. Wed 16:40 Dimitry, O.I.H. Tue 17:00 Eberl, C. F1-452 Enzinger, N. Thu 12:20 Ding, W. Tue 18:00 Ebke, D. Tue 11:20 Eppel, K. F1-135 Dippenaar, R. Thu 11:20 Echegut, P. Wed 09:30 Erbe, A. Wed 15:10 Ditsch, F. Wed 18:00 Eck, B. Thu 09:15 Ergin, K. Tue 17:20 Ditsche-Kuru, P. Wed 15:50 Eckardt, T. Wed 9:50, C1-33 Erkartal, B. D1-343 Dmitrieva, O. Wed 12:00 Eckert, J. B6-218 Erkartal, B. A2-470

49 List of Authors

Erlemeyer, J. Thu 10:35 Fortain, J.-M. Thu 14:00 Gall, S. Tue 17:20 Essari, A. C1-746 Frage, N. C3-551 Gall, S. Tue 17:40 Etter, T. Wed 08:50 Frage, N. Thu 15:00 Galler, M. Thu 12:20 Evans, A. Wed 08:50 Franke, M. A2-707 Gamsjäger, E. Tue 17:40 Evans, A. Wed 15:30 Franta, D. Tue 18:00, C2-348 Gamsjäger, E. Tue 18:00 Evans, A.D. 0.0-444 Franzke, M. Wed 11:20 Gamsjäger, M. Tue 17:00 Eymann, K. Tue 17:00 Fras, G. Thu 14:00 Gan, W. D1-637 Fratzl, P. Tue 18:00 Gandin, C.-A. E3-90 F Fratzl, P. Wed 17:40 Garbe-Schönberg, D. A4-567 Fabritius, H. F1-274 Fratzl, P. Wed 18:00 Garcia, C. Thu 09:35 Fabritius, H. F1-493 Freigang, F. Wed 08:30 Garcia, J. Tue 14:30 Fabritius, H. Wed 15:10 Frenzel, J. Tue 15:10 Garcia, J.L. E3-106 Fachberger, R. Tue 10:40 Freudenberger, J. B6-218 Gaul, H. Thu 12:00 Fachmann, B. B5-636 Freudenberger, J. B6-318 Gault, R. Thu 12:40 Fähler, S. A2-470 Freudenberger, J. Wed 09:50 Gebhard, S. Thu 14:00 Faes, A. Wed 14:50 Freudenberger, J. Thu 15:20 Gebhardt, T. Thu 14:40 Faidel, D. Wed 17:20 Friak, M. F1-493 Geertz, G. D2-225 Faivre, D. F1-286 Friak, M. B1-534 Gegner, J. E2-66 Fallah, V. Wed 09:10 Friak, M. B5-507 Gehrke, R. Wed 11:20 Faraji, M. D1-792 Friak, M. B6-463 Geier, S. A4-217 Farias Cardoso, F. F5-686 Friak, M. B5-499 Geißler, D. B6-318 Fathy, A.M. Wed 16:40 Friak, M. Tue 16:40 Gellermann, C. Wed 08:50 Faupel, F. A4-567 Fricke, K. Thu 14:20 Gemming, S. Wed 12:00 Faupel, F. A2-576 Friederici, V. Thu 14:00 Gemming, T. Thu 14:00 Faupel, F. A4-591 Friend, C. Tue 15:50, A3-246 George, E.P. Wed 11:40 Faupel, F. Tue 18:00 Frint, P. D3-141 Georgii, R. D2-522 Faupel, F. Wed 13:45 Frint, P. Tue 17:00 Geppert, M. Thu 12:00 Fecht, H.-J. B1-269 Frischkorn, J. Tue 12:00, C2-506 Gerardi, M. F5-686 Feck, C. Wed 12:00, F1-696 Fritsch, S. Wed 18:00, Gerasin, V. Tue 17:20 Felser, C. Tue 11:40 Fritsch, S. TueD3-210 17:00 Gerdes, T. Wed 15:10 Fenzel, J. D3-633 Fritsching, U. Wed 15:10 Gerhardt, N.C. Wed 15:50, Fernades, C.P. A3-67 Fritz, H. A2-453 German, R. ThuD3-116 09:35 Fery, A. Wed 14:30 Fritze, H. A2-200 Germann, H. Wed 17:40 Feyerabend, F. F5-37 Fritze, H. A2-594 Gesswein, H. Tue 12:00, D3-163 Fichtner, M. A2-502 Fritze, H. Tue 11:00 Geupel, A. Tue 12:00, A2-711 Fichtner, M. Wed 14:30 Froebel, U. Wed 17:20 Ghavami, H. E2-291 Fiedler, A. 0.0-484 Fröhlich, M. F1-139 Gheorghies, C. Wed 9:50, D3-46 Fiedler, M. Thu 14:20 Froideval, A. D2-756 Ghodrat, S. D1-828 Fierro, D. Thu 09:15 Frommeyer, G. B1-534 Giebeler, L. B4-423 Fiertz, F. Tue 17:20 Fuchs, E. C2-285 Gigimol, M.G. E2-685 Figovsky, O. Tue 10:40 Fürbeth, W. Wed 08:30 Giovannelli, F. Wed 09:30 Filiz, V. F1-332 Fuhrlich, T. Tue 15:30, C1-596 Giusti, P. Tue 11:20 Finlay, F. D2-494 Fuhrmann, L. Tue 12:00, D3-265 Glatzel, U. B6-488 Finn, M. Wed 12:00, Fujieda, S. 0.0-21 Glatzel, U. B6-489 Fischer, F.D. TueD3-202 17:00 Fujieda, S. Wed 15:50, D3-59 Glatzel, U. Wed 12:00, Fischer, F.D. Tue 17:40 Funar, P. D2-165 Glaubitz, S. WedD3-540 12:00, Fischer, F.D. Tue 18:00 Glavatskikh, M. ThuD3-202 14:20 Fischer, F.D. Thu 11:40 G Glavatskikh, M. Thu 14:40 Fischer, G. Thu 11:20 Gabler, M. Wed 08:30 Godlinski, D. F5-317 Fischer, S. Wed 17:20 Gad, S.A. E2-398 Göken, M. B1-57 Fischer, T. Tue 11:00 Gadow, A. Tue 15:10 Göken, M. C2-457 Fischer, T. Wed 14:30 Gadow, R. Tue 14:30 Göken, M. Tue 18:00, D3-442 Flaig, S. Tue 15:50, A3-154 Gafurov, U. A4-652 Göken, M. Tue 15:30, C1-556 Fleck, C. Wed 17:20 Gafurov, U. B6-653 Göken, M. Tue 18:00, D3-738 Fleischmann, E. B6-488 Gaganov, A. Thu 15:20 Göken, M. Wed 15:50, Flores, O. Wed 08:30 Gaisin, R. B1-269 Göken, M. TueD3-583 15:50 Fössl, T. Thu 15:20 Gaisin, R. Thu 09:15 Göken, M. Tue 16:40 Fornalczyk, G. Tue 11:00 Gaitzsch, U. B6-218 Göken, M. Wed 17:40

50 List of Authors

Göken, M. Thu 15:00 Guillon, O. Thu 09:55 Hayashi, Y. Thu 11:20 Goenuellue, Y. Wed 11:20 Guizard, C. Thu 10:35 Hayn, S. 0.0-679 Goerigk, G. Thu 15:00 Guo, X. B5-435 He, H.Z. C4-789 Götschel, I. Thu 11:20 Gurion, B. Thu 15:00 Hébert, C. D2-279 Golikov, P. E2-66 Gurlo, A. 0.0-730 Hébert, C. D2-320 Golser, A.V. Wed 11:40 Guzenko, V. D2-320 Hecht, U. Tue 11:40 Gorr, B. Wed 17:00 Hecht, U. Wed 16:40 Gottstein, G. Tue 14:30 H Heckel, T. Thu 15:20 Gottstein, G. Thu 10:15 Haas, K.-H. Wed 08:50 Heczko, O. B1-660 Gottstein, G. Thu 12:00 Haba, J. Tue 17:00 Hegemann, D. Tue 14:50 Gottstein, G. Thu 14:00 Hachemi, H. Wed 11:40 Heidom, U. D1-314 Govender, G. B1-335 Haderk, K. Thu 14:20 Heilmaier, M. B1-593 Goyal, A. Tue 11:20 Hänninen, H. Tue 17:40, C1-417 Heilmaier, M. Tue 12:10 Grabowski, B. Tue 17:20 Hänninen, H. Wed 08:50 Heilmaier, M. Tue 14:30 Graf, C. Thu 14:20 Haese-Seiller, M. D2-365 Heilmaier, M. Wed 11:00 Graf, M. Wed 11:00 Haese-Seiller, M. D2-539 Heilmann, A. Thu 10:15 Graf, M. Wed 17:20 Häußler, D. D1-314 Heim, M. Wed 11:40 Granzow, N. Wed 14:30 Hage Jr., E. C3-549 Heinle, C. Wed 17:00 Granzow, T. Wed 15:50, Hage Jr., E. C3-553 Heinrich, S. F1-332 Grathwohl, G. TueD3-132 16:40 Hagemann, K. Tue 17:40 Heller, C. F5-832 Grathwohl, G. Wed 10:40 Hagenau, A. Wed 11:40 Heller, C. Tue 18:00, F5-64 Greer, A.L. Tue 11:20 Hahn, H. A2-502 Heller, C. Thu 14:40 Grenzer, J. Thu 09:55 Hahn, H. Tue 17:40, C1-600 Hellmann, G.P. A4-257 Greve, H. A2-585 Hahn, H. Wed 08:30 Hellmann, G.P. C4-341 Grey, C.P. Wed 08:50 Hahn, H. Wed 09:10 Hellmann, G.P. C2-346 Gries, T. E3-352 Hahn, H. Thu 15:20 Hellmann, G.P. A4-354 Gries, T. Wed 9:50, C1-570 Haibel, A. Tue 17:20 Hellmann, G.P. B5-364 Griesche, A. Wed 11:00 Haibel, A. Wed 16:40 Hemberger, Y. E3-340 Grigoryev, E. C4-123 Hain, H. Tue 12:00, D3-163 Hemberger, Y. Wed 15:50 Groen, M. B5-435 Halle, T. D3-141 Hénaff, G. Wed 18:00 Gross, D. Wed 11:20 Halle, T. Tue 18:00, D3-137 Henkel, S. Tue 11:00 Groß, S. Wed 17:20 Halle, T. Wed 18:00, Henneberg, D. Thu 09:55 große Holthaus, M. Tue 14:50 Halle, T. WedD3-146 18:00, Hentschel, M. Wed 15:50, Große, M. Wed 09:10 Hamann, S. A2-470D3-210 Herbeck-Engel, R. C4-670D3-414 Grossmann, C. D3-827 Hamann, S. Wed 15:50, Herlach, D.M. E3-90 Groth, E. Thu 14:40 Hamaz, A.V. TueD3-116 15:30 Herper, H.C. A2-566 Groza, J. Thu 10:15 Hammelmann, R. Tue 12:00, C2-506 Herper, J. Tue 15:30, C2-74 Groza, J.R. C4-169 Hamza, A. Tue 15:50, A3-655 Herrera, C. Tue 14:50 Groza, J.R. C4-211 Hamza, A. Tue 14:30 Herrmann, M. C4-519 Groza, J.R. C4-212 Hamza, A.V. 0.0-615 Hertlein, F. D1-314 Groza, J.R. C4-382 Hamza, A.V. Wed 08:50 Herzen, J. Tue 17:20 Gruber, P. Tue 12:00, D3-163 Han, T. Wed 09:30 Herzen, J. Wed 09:30 Grunwald, I. Thu 12:00 Hansen, T. D2-589 Herzen, J. Wed 16:40 Grunwald, I. Thu 14:40 hansen, T.W. Wed 14:50 Herzog, G. Wed 11:20 Gruzdev, A.S. E2-20 Hanus, P. Wed 15:10 Hessler-Wyser, A. B1-517 Grydin, O. Wed 12:00 Harenburg, J. Tue 17:00 Hessler-Wyser, A. D2-577 Grytsiv, A. Wed 15:30 Harrington, M. Wed 18:00 Hessler-Wyser, A. Wed 14:50 Grzesiak, A. Thu 14:20 Hartmaier, A. E3-153 Hettstedt, F. A2-576 Gu, F. A3-213 Hartmaier, A. B6-277 Hickel, T. Tue 16:40 Gübler, N. Wed 9:50, C1-33 Hartmaier, A. Thu 12:40 Hickel, T. Tue 16:40 Gündüz, M. B6-624 Hasani, A. Tue 14:30 Hickel, T. Tue 17:20 Günschmann, S. Tue 15:30, C2-533 Hasler, S. Wed 09:30 Hickel, T. Thu 09:35 Günther, T. Wed 11:00 Hassabo, M. Tue 17:40, C1-43 Hickel, T. Thu 09:55 Günther, V. Thu 09:15 Hassan, A. Wed 16:40 Hild, S. F1-274 Guillen, T. Tue 17:40 Hauptmann, W. Thu 10:15 Hild, S. F1-493 Guillon, O. C4-389 Haushahn, T. Wed 17:00 Hinojosa, M. F1-573 Guillon, O. Wed 18:00 Hausöl, T. Tue 18:00, D3-442 Hinze, U. Thu 15:00 Guillon, O. Thu 09:55 Hausöl, T. Tue 15:30, C1-556 Hiraga, K. Wed 12:00, C1-358 This list indicates the presentation time (for example: Wed. 11:40 = Wednesday, 11:40 h) and / or the poster reference number (for example: C3-553 = Symposium C3, Poster: 553). Listed are speakers as well as co-authors.

51 List of Authors

Hirsch, U. Thu 10:15 Humenik, M. Wed 12:00, F1-518 Jendras, M. Thu 15:20 Hirsekorn, S. Tue 11:20 Hunkel, M. Wed 15:10 Jenkinson, I. D2-494 Hirt, G. Wed 11:20 Huppmann, M. Tue 17:20 Jerrams, S. Wed 18:00, Hoch, E. F3-654 Huppmann, M. Tue 17:40 Jeurgens, L.P.H. ThuD3-683 10:15 Hockauf, K. Tue 18:00, D3-137 Husinsky, W. C4-303 Jeutter, N. Thu 09:55 Hockauf, K. Tue 17:00 Hvizová, P. C2-757 Jin, H.-J. Tue 15:30, C1-597 Hockauf, M. D3-141 Jin, H.-J. Tue 15:30 Hockauf, M. D3-253 I Jinguji, N. E2-175 Hockauf, M. Tue 18:00, D3-137 Idrissi, H. Wed 10:40 Jo, W. Wed 15:50, Hockauf, M. Tue 17:00 Ilavsky, J. Tue 14:30 Jönsson, P. ThuD3-132 09:35 Hockauf, M. Thu 10:35 Imayev, R.M. B1-269 John, C. Wed 18:00, Hoeche, D. F5-37 Imayev, R.M. Thu 09:15 Jowsa, J. WedD3-210 9:50, B2-157 Höhn, M. Tue 17:20 Imayev, V. Thu 09:15 Jung, H. Thu 09:15 Hoell, A. Thu 15:00 Imayev, V.M. B1-269 Junghans, F. Thu 10:15 Höppel, H.W. Tue 15:30, C1-556 Imgrund, P. Thu 14:00 Höppel, H.W. Tue 18:00, D3-442 Indis, S. Tue 12:00, D3-163 K Höppel, H.W. Tue 15:50 Indris, S. Wed 08:50 Kabir, M.R. B1-338 Höppel, H.W. Tue 16:40 Indris, S. Wed 09:10 Kabisova, L. A4-652 Hoffelner, W. D2-756 Inführ, R. C4-355 Kadkhodapour, J. D1-673 Hoffman, M. Wed 11:40 Inoue, K. Wed 15:50, D3-59 Kättlitz, O. Thu 09:55 Hoffmann, A. Thu 12:20 Ioelovich, M. Tue 10:40 Kailer, A. A4-13 Hoffmann, F. Wed 15:10 Ionescu, E. Tue 17:00 Kaloshkin, S. Tue 17:20 Hoffmann, F. Wed 15:30 Ionescu, E. Wed 09:30 Kaltenmaier, A. F1-656 Hoffmann, H. Tue 11:40 Iqbal, F. Wed 17:40 Kampmann, R. D2-365 Hoffmann, M.J. C4-389 Irlizzi, G. C4-382 Kampmann, R. D2-539 Hoffmann, M.J. Wed 15:30 Ismail, E.A. Tue 17:00 Kannan, R. Tue 15:50 Hoffmann, M.J. Thu 09:55 Ismer, L. Tue 17:20 Kannengießer, T. Wed 08:30 Hoffmann, S. B5-403 Ivan, I. C4-382 Kannengießer, T. Wed 11:00 Hoffmeister, J. Wed 17:40 Ivanisenko, J. Tue 18:00, D3-462 Kappler, A. F3-229 Hofmann, M.R. Wed 15:50, Ivanisenko, Y. Wed 08:30 Kaps, S. A2-480 Hohnholt, M. ThuD3-116 12:00 Izumi, T. C4-36 Kaptay, G. F3-740 Holdsworth, S.R. Wed 15:30 Kaptay, G. D2-741 Hollad, S. B6-538 J Karimi, F. Thu 15:00 Holland, T. Thu 10:15 Jabbari Behnam, M.M. E2-291 Karpacheva, G. A4-138 Holland, T. Thu 12:00 Jacques, P.J. Wed 09:10 Karsten, S. F1-274 Holland, T.B. C4-211 Jacques, P.J. Wed 10:40 Kashem, A. Wed 11:20 Holland, T.B. C4-212 Jäger, W. D1-314 Kasper, A. Wed 17:40 Holland-Moritz, D. Wed 9:50, D3-316 Jäntsch, U. Thu 12:20 Kathrein, M. Tue 12:00, C2-297 Hopfeld, M. Tue 12:00, C2-498 Jäpel, T. Wed 14:30 Kathrein, M. Tue 11:40 Hoppe, R. B1-299 Jahedi, M. E2-178 Kato, M. Wed 11:20 Houbertz, R. Tue 11:40 Jahedi, M. E2-180 Katsich, C. Wed 12:00, Hrkac, T. A4-567 Jahedi, M. B6-179 Katsich, C. ThuD3-349 10:15 Hrkac, T. Thu 09:35 Jahn, A. Wed 9:50, B2-39 Katsikis, N. Tue 17:40 Hrt, G. Thu 11:40 Jahn, A. Wed 11:20 Kauffmann, A. B6-218 Hu, W. Tue 14:30 Jahn, A. Wed 11:40 Kauffmann, A. B6-318 Hua, J. E3-153 Jahn, A. Thu 12:20 Kawalla, R. Wed 11:00 Huang, J. A4-217 James, S.E. Tue 15:30 Kawalla, R. Wed 17:20 Huber, J. Tue 16:40 James, S.L. Tue 15:30 Kaysser-Pyzalla, A. Thu 12:40 Huber, M. Wed 10:40 Janeczek, M. B6-429 Kaysser-Pyzalla, A.R. E3-106 Huber, N. Thu 12:40 Janek, J. D1-18 Kebir, H. Wed 11:40 Hublin, J. Wed 17:40 Janik, V. Tue 18:00 Keller, M.H. B3-469 Hübner, P. Tue 11:00 Janssen, M. D1-828 Keller, T. Wed 17:20 Huemer, K. F1-274 Januard, F. Thu 14:00 Kelm, K. B1-593 Hünert, D. Wed 11:00 Jaro ová, M. B1-660 Kelm, K. Wed 08:30 Hüsing, N. Tue 15:50, A3-154 Jarosová, M. Wed 15:10 Kennerknecht, T. B6-359 Hüsing, N. Tue 14:50 Jarozewicz, J. F5-317 Kern, D.P. Thu 10:35 Hufenbach, J. Wed 11:00 Jeangros, Q. Wed 14:50 Kern, F. Tue 14:30 Hufenbach, W. C3-254 Jelvestam, U. C4-212 Kern, F. Tue 15:10

52 List of Authors

Kerscher, E. Wed 17:40 Klocke, A. Wed 09:50 Krzysztofinska, M. Tue 10:40 Keshavarz Hedayati, M. Tue 18:00 Klostermann, J. A3-345 Kubota, Y. B6-476 Keßler, B. Thu 15:00 Kluger, P. Thu 09:55 Kucheyev, S. Tue 14:30 Keßler, O. Wed 15:50 Knieke, C. Tue 16:40 Kudryashov, V. D2-365 Kestens, L.A.I. D1-828 Knöchel, R. A2-576 Kübel, C. Tue 18:00, D3-462 Kestler, H. Wed 11:00 Koch, D. Wed 08:30 Kübel, C. Wed 08:30 Keuper, M. E3-340 Koch, K. F1-656 Kübel, C. Wed 14:30 Keuper, M. Wed 15:50 Koch, K. Wed 14:30 Kuebel, C. Thu 09:35 Khajepour, A. Wed 09:10 Koch, K. Thu 12:20 Kübel, C. Thu 12:20 Khaleghi, E. Thu 09:35 Köhler, M. Thu 10:35 Kuebel, C. Thu 15:20 Khalifa, T. A4-42 Körmann, F. Thu 09:55 Kuehn, U. Tue 16:40 Khan, A.A. Wed 15:10 Körner, E. Tue 14:50 Kühn, U. Wed 11:00 Khan, A.U. Wed 15:30 Kohler, C. Wed 15:50 Kühn, U. Wed 15:30 Kharicha, A. Wed 08:50 Kohri, H. Wed 11:20 Kühner, P. F3-229 Khismatullin, T. Thu 09:15 Kolbasnikov, N.G. E3-48 Kulawinski, D. Tue 11:00 Khlusova, E.I. E3-48 Kolbe, W. Tue 17:00 Kulkami, A. A2-576 Khorashadizadeh, A. Tue 14:50 Kollenberg, W. C4-308 Kulkami, A. Thu 09:35 Kido, F. E2-545 Kommareddy, K.P. Tue 18:00 Kulkov, S. B6-181 Kieback, B. Tue 17:00 Kondratenko, S.V. 0.0-344 Kulkov, S. Wed 12:00 Kienle, L. A2-470 Konijnenberg, P. Wed 17:00 Kumar, A. Tue 11:20 Kienle, L. D1-312 Konovalov, S. Wed 16:40 Kumar, R. Wed 15:30 Kienle, L. A2-576 Konrad, C. B6-488 Kumpfmüller, J. C4-355 Kienle, L. B1-593 Kopecek, J. B1-660 Kumpfmüller, J. Thu 15:00 Kienle, L. Thu 09:35 Kopecek, J. Wed 15:10 Kundin, J. Tue 15:10 Killinger, A. Tue 15:10 Koplin, C. A4-13 Kupfer, R. C3-254 Kilo, M. Wed 17:00 Kosanin, N. Wed 17:40 Kups, T. Tue 12:00, C2-498 Kim, B.-N. Wed 12:00, Kosogor, A. E3-287 Kurmanaeva, L. Tue 18:00, D3-462 Kim, D.H. WedC1-358 15:30 Kosta, A. Thu 12:40 Kurzydlowski, K.J. F5-317 Kim, S. Thu 09:15 Kostka, A. Thu 11:20 Kusnezoff, M. A2-752 Kim, S. Thu 14:40 Kottlorz, C. C4-341 Kutschera, S. C2-346 King, A. Wed 15:10 Koukourakis, N. Wed 15:50, Kutschke, S. Wed 11:00 Kipphardt, H. Wed 08:30 Kovalev, A. WedD3-116 9:50, B2-39 Kuvel, R. B6-429 Kirchlechner, C. Thu 11:40 Kovalev, A. Wed 11:20 Kuzmin, N.L. E2-20 Kirchner, A. Tue 17:00 Kovalev, A. Wed 11:40 Kwiaton, N. Thu 15:20 Klabunde, R. E2-102 Kowanda, C. Tue 12:10 Kwon, E.P. 0.0-21 Klag, O.M. Wed 15:10 Kozachenko, V. 0.0-344 Klauß, H. B6-218 Kozachenko, V.V. A4-371 L Klauss, H. B6-318 Kraft, O. F1-452 L‘vov, V.A. E3-287 Klauß, H. Wed 09:50 Kraft, O. Tue 10:40 Labudde, T. Tue 15:30 Klauss, H. Thu 15:20 Kranzmann, A. Wed 11:00 Lai, Y.W. Wed 15:50, Kleebe, H.J. Tue 14:30 Kratochvíl, P. Wed 15:10 Laipple, D. WedD3-116 16:40 Kleebe, H.-J. Tue 15:10 Krautz, M. B6-318 Lakatos, G. F3-740 Kleebe, H.-J. Wed 09:30 Krempaszky, C. Wed 17:20 Lampke, T. D3-141 Kleebe, H.-J. Thu 12:20 Krenkel, W. Wed 08:30 Lampke, T. C2-706 Kleebe, H.-J. Thu 14:20 Kröger, W. Tue 17:00 Lampke, T. Tue 18:00, D3-137 Klement, U. C4-212 Kroke, E. Tue 14:50 Lampke, T. Wed 18:00, Klemm, M. C2-103 Kroll, S. Tue 16:40 Lang, G. F1-100D3-146 Klemm, S. B1-322 Krüger, L. Tue 12:00, D3-265 Lang, G. Tue 11:00 Klemm, V. B5-636 Krüger, L. Wed 9:50, B2-39 Lang, K.-H. Wed 12:00, Klemm, V. B5-525 Krüger, L. Wed 11:20 Lang, W. C4-669D3-368 Klemm, V. Tue 12:00, C2-297 Krüger, M. Wed 11:00 Lange, C. Tue 12:00, C2-498 Klemm, V. Tue 12:00, C2-520 Krüssel, T. Thu 11:20 Lange, R. Thu 10:35 Klemm, V. Tue 11:40 Krumme, B. Tue 12:00, A2-763 Lapovok, R. Tue 15:50 Klemm, V. Tue 14:50 Krumphals, F. Wed 16:40 Lashkariov, V. Wed 12:00, Klemm, V. Thu 10:35 krumphals, F. Wed 16:40 Laska, J. A4-424C1-464 Kleppinger, R. D2-225 Krupp, U. Tue 17:40 Laska, J. Tue 10:40 Klever, C. A2-635 Kruse, J. Wed 09:30 Laukart, J. B1-342 Klingelhöffer, H. Wed 11:00 Krywka, C. D2-609 Laukart, J. Wed 08:30

53 List of Authors

Lazarenko, A. A4-371 Lofaj, F. C2-757 Majtás, D. B1-660 Leal, A. Wed 11:20 Logachev, A. B1-667 Maksimkin, A. Tue 17:20 Leal-Egana, A. Tue 11:00 Logacheva, A. B1-667 Maljusch, A. B1-322 Leber, J.H. D2-756 Logvinov, R. Thu 11:20 Malzbender, J. Thu 10:15 Leder, A. F1-656 Lohbauer, U. F3-537 Manara, J. B3-469 Leder, A. Wed 15:50 Loitz, H. Wed 14:30 Manhardt, H. Wed 9:50, C1-33 Lee, C. Thu 09:15 Lopes, E.N. F5-686 Mani, B. B6-179 Lee, C. Thu 14:40 Lopes, E.S.N. Tue 18:00, F5-599 Mani, B. E2-178 Lee, J. Thu 09:15 Loprang, R.R. Wed 17:20 Manzat, A. Tue 15:10 Lee, J. Thu 14:40 Lorenz, U. Thu 10:15 Maria, R. D2-225 Lee, J.R.I. Tue 14:30 Lorenz, U. Thu 14:40 Marichal, C. D2-320 Legros, M. Tue 17:40 Loretto, M.H. Wed 14:30 Markovic, M. Wed 17:40 Lehmann, G. B5-636 Lotnyk, A. A2-470 Marletta, G. Thu 11:20 Lehmann, G. B5-525 Lotnyk, A. D1-312 Marquard, A. Wed 11:00 Lehmhus, D. C4-669 Lotnyk, A. B1-593 Marr, T. Wed 09:50 Lehmhus, D. Wed 9:50, C1-665 Lotnyk, A. Thu 09:35 Marrow, T.J. Wed 15:10 Lehnert, T. C4-670 Lotynk, A. D1-343 Martin, M. Thu 14:40 Lei, H. Wed 17:00 Lozovski, V. Wed 12:00, Martin, S. Tue 12:00, D3-265 Leisegang, T. Wed 12:00 Lu, H. B5-305C1-464 Martin, S. Wed 9:50, B2-39 Leist, T. Wed 15:50, Lu, H. Wed 09:30 Martin, S. Wed 11:20 Leiste, H. A2-635D3-132 Lucas, P. C3-254 Martin, U. C4-519 Leiter, M. Thu 15:20 Luchsinger, R. Wed 14:50 Martin, U. Tue 12:00, D3-265 Leitner, H. Thu 15:20 Ludwig, A. D2-127 Martin, U. Wed 9:50, B2-39 Leiva-Ronda, P. B1-57 Ludwig, A. Wed 15:50, Martin, U. Wed 11:20 Lellinger, D. Tue 17:40 Ludwig, A. WedD3-116 08:50 Marx, M. Tue 18:00, D3-657 Leonhardt, M. Tue 12:00, C2-520 Ludwig, A. Thu 14:00 Masimov, M. B5-474 Leyens, C. Thu 14:20 Ludwig, C. Wed 09:50 Masimov, M. Thu 15:20 Li, C. A3-213 Ludwig, W. Wed 15:10 Masselter, T. Wed 17:00 Li, C. Tue 15:30, C1-596 Lü, Y. Thu 12:00 Mathew, M.D. Tue 15:50 Li, J. Wed 09:10 Lübben, T. Wed 15:30 Mathur, S. Tue 12:00, C1-675 Li, W. Thu 09:35 Luerssen, B. D1-18 Mathur, S. Tue 12:00, C1-672 Li, X. B6-237 Luo, L. Wed 12:00, Mathur, S. Tue 11:00 Li, Y. Tue 15:50 Lupascu, D.C. TueC1-203 15:30, C1-596 Mathur, S. Wed 09:10 Li, Z. C4-303 Lupton, D.F. Wed 9:50, C1-33 Matousek, J. A4-755 Lin, R. C1-821 Lymperakis, L. F1-493 Matschegewski, C. Thu 10:35 Lin, Y.-S. Thu 12:40 Lysenko, V. Wed 12:00, Matsumoto, Y. B6-822 Lindemann, J. Thu 14:20 Lyubimova, J. ThuC1-464 15:20 Matsumura, Y. C4-36 Lindemann, J. Thu 14:40 Mattern, N. Wed 11:00 Lindner, P. D2-589 M Mattern, N. Thu 14:40 Lintz, E. Wed 11:40 Ma, D. B5-305 Matys, S. Wed 11:00 Liot, F. B5-499 Ma, D. F1-493 Matzui, L.Y. A4-371 Lis, A. A4-424 Ma, D. B6-538 Mayrhofer, P.H. Tue 10:40 Liska, R. C4-303 Ma, D. Wed 9:50, D3-543 Mayser, M. Wed 15:50 Liska, R. C4-355 Ma, D. Wed 09:30 MC. Arduini-Schuster,, B3-469 Liska, R. F5-832 Maas, D. E3-829 McCarney,M.C. D.G. D1-107 Liska, R. Tue 18:00, F5-64 Machio, C. C4-169 Medne, O. E2-523 Liska, R. Thu 14:40 Mácutá, S.-D. Wed 18:00, D3-45 Meier, H. Tue 12:00, C2-506 Liska, R. Thu 15:00 Mácutá, S.-D. Wed 9:50, D3-46 Meka, S. Tue 15:30 Liss, K.-D. Thu 11:20 Märten, A. Wed 12:00, F1-696 Melnichuk, Y.Y. 0.0-344 Liu, G. Wed 15:30 Maglia, F. Thu 09:15 Memarpour, A. Thu 09:35 Liu, H. Wed 09:10 Mahmoud, T. A4-42 Meneses, R. Tue 12:00 Liu, T. D2-26 Mahmoudi, J. Wed 08:30 Menning, M. Wed 11:40 Llin, A. Thu 11:20 Maier, H.J. Tue 15:30 Menzel, M. Thu 10:15 Lob, A. Thu 11:20 Maier, V. Tue 15:30, C1-556 Mera, G. 0.0-730 Loboda, P. Wed 11:00 Maier, V. Tue 18:00, D3-738 Meratian, M. B6-71 Loeffler, R. Thu 10:35 Maier, V. Tue 16:40 Meszaros, R. B4-702 Löffler, S. Tue 12:00, A2-466 Maierle, J. Thu 09:55 Metz, O. Thu 15:00 Lörcher, S. Wed 16:40 Maiwals, M. Thu 14:40 Meurisch, K. A4-591

54 List of Authors

Meyer, A. Wed 9:50, D3-316 Müller, M. Wed 16:40 Nickel, K.G. E3-340 Meyer, D.C. Wed 12:00 Müller, M. Thu 15:00 Nickel, K.G. Wed 15:50 Meyer, L.W. Wed 18:00, Müller, M. Thu 15:00 Nicolau, A.M. Tue 18:00, F5-189 Meyer, R. WedD3-146 15:50, Müller, M.M. Thu 14:20 Niederberger, M. Wed 12:00, Michaelis, A. A2-752D3-116 Müller, R. Tue 12:00, C1-672 Niendorf, T. TueC1-203 15:30 Michailov, M. Thu 11:40 Müller, R. Tue 12:00, C1-675 Nies, D. Wed 12:00, Michailov, V. B3-351 Müller, R. Wed 08:30 Nikolov, S. F1-493D3-202 Michalski, A. C4-231 Müller, S. Tue 17:20 Nishiura, N. B6-476 Michotte, C. Tue 12:00, C2-297 Müller, S. Tue 17:40 Nonnenmacher, K. Thu 12:20 Michotte, C. Tue 11:40 Müller, T. C2-706 Noster, U. Tue 17:00 Mihai, A. D2-165 Müller-Bollenhagen, C. Wed 18:00 Novikov, A. E2-621 Mikhalovsky, S.V. Tue 15:30 Müller-Buschbaum, P. Wed 11:20 Nürnberger, S. Thu 12:00 Mikolajick, T. A2-707 Münning, M. Thu 15:00 Nxumalo, S. C4-169 Millán, J. Wed 12:00 Münsstedt, H. Tue 17:40 Millán, J. Thu 12:00 Mujica, L. Wed 9:50, B2-455 O Milosan, I. E3-51 Mukherjee, A. Thu 10:15 Oehler, H. Tue 17:40 Mirbagheri, S.M.H. E2-774 Mukherjee, A.K. Thu 12:00 Oehring, M. B1-272 Mirshahi, F. B6-71 Mukherjee, K. Wed 17:20 Oehring, M. Thu 09:35 Mirshahi, F. B6-71 Mukhtarova, N. A4-652 Oehring, M. Thu 10:15 Mishra, Y.K. A2-480 Munoz, S. C4-421 Öztürk, G. A4-257 Mittemeijer, E.J. Tue 15:30 Muravin, G. C3-551 Ogurreck, M. Wed 09:30 Mittemeijer, E.J. Thu 10:15 Muravin, G. Thu 15:00 Ogurreck, M. Wed 16:40 Miura, H. Wed 09:10 Muresan, M. Tue 18:00, C2-348 Ohrndorf, A. Tue 17:40 Miura-Fujiwara, E. B6-476 Music, D. Tue 11:20 Olbricht, J. Wed 11:00 Mizrahi, I. C3-551 Music, D. Thu 14:40 Oleneva, T. Thu 09:15 Mizrahi, I. Thu 15:00 Mutombo, K. Wed 17:00 Olevsky, E. Tue 11:40 Mlnarik, J. Wed 10:40 Olevsky, E. Thu 09:35 Moat, R.J. Wed 15:50 N Oliveira, P.H.F. C3-549 Mönch, J. Thu 10:15 Naddaf, A.A. F3-63 Olschok, S. Thu 11:40 Moenig, R. Tue 12:00, D3-163 Nafati, F. B5-372 Ophey, J. Tue 12:00, D3-163 Mohamed, S. A4-42 Nagel, A. Wed 11:40 Ory, S. Wed 09:30 Mohles, V. Thu 10:15 Nagel, K. Tue 11:00 Oshida, H. Wed 12:00, Mohr, J. Wed 09:30 Nagesha, A. Tue 15:50 Ossenbrink, R. B3-351C1-358 Moll, H. Tue 12:00, C2-506 Nambu, T. B6-822 Ossowski, M. Tue 15:30, C2-568 Moll, H. Tue 18:00, C2-650 Nastac, L. E3-829 Ossowwski, M. F5-562 Molnár, P. B1-660 Nastac, M. E3-829 Ostafin, M. Thu 10:35 Molodov, D.A. Thu 12:00 Neagu, G. D2-165 Oswald, A. B5-636 Mondragon-Rodriguez, Tue 12:00, A2-298 Nebe, J.B. Thu 10:35 Oswald, A. B5-525 Mondragón-Rodriguez,C.G. Wed 11:20 Necas, D. Tue 18:00, C2-348 Oswald, S. B4-423 Moos,G.C. R. Tue 12:00, A2-711 Neinhuis, C. Wed 15:30 Oswald, S. 0.0-484 Morita, K. Wed 12:00, Neinhuis, C. Wed 18:00 Oswald, S. Thu 14:00 Motegi, T. E2-545C1-358 Nestler, D. C2-706 Ott, R. Wed 08:50 Motylenko, M. B5-636 Neugebauer, J. B5-499 Otterstein, E. C4-162 Motylenko, M. B5-525 Neugebauer, J. B5-507 Ouyang, W. Thu 15:00 Motylenko, M. Tue 12:00, C2-297 Neugebauer, J. B6-463 Ozkan, S. A4-138 Motz, G. Wed 08:30 Neugebauer, J. F1-493 Moulin, J.-F. D2-539 Neugebauer, J. B1-534 P Mozammel, M. E2-291 Neugebauer, J. Tue 16:40 Pabisch, S. Tue 14:50 Mücklich, F. Tue 11:00 Neugebauer, J. Tue 17:20 Paesano Jr, A. E2-830 Mühle, U. Tue 12:00, C2-520 Neugebauer, J. Thu 09:35 Paffenholz, V. Thu 11:40 Müller, B. Wed 15:50, Neugebauer, J. Thu 09:55 Paidar, V. Thu 12:40 Müller, B. TueD3-414 17:20 Neugebauer, R. Wed 18:00, Paikin, A. E2-621 Müller, B. Thu 11:40 Neumann, R. TueD3-210 15:10 Pal, E. C4-669 Müller, F. F1-286 Neumeier, S. Thu 15:00 Pal, E. Wed 9:50, C1-665 Müller, F.E.H. Tue 12:10 Newirkowez, A. Tue 18:00, C2-605 Palm, M. B1-534 Müller, M. D2-609 Nick, E.-M. Thu 15:00 Palm, M. B1-593 Müller, M. D2-365 Nickel, D. Tue 17:00 Palm, M. Wed 10:40 Müller, M. Tue 17:20 Nickel, K.G. F3-229 Pan, J. Tue 12:00, C1-675

55 List of Authors

Pan, J. Wed 09:10 Pöpke, H. D1-18 Raab, D. F1-493 Pandey, J.K. F1-226 Poletti, C. Wed 17:20 Raabe, D. D2-26 Pandey, S. Wed 15:30 Poletti, M.C. B5-682 Raabe, D. F1-274 Pangpaiboon, N. A4-416 Pollmann, K. Wed 11:00 Raabe, D. B6-463 Panjehpour, M. B6-71 Polsakiewicz, D. C4-308 Raabe, D. Tue 14:50 Papendorf, B. Wed 09:30 Polska, U. Tue 17:40 Raabe, D. Tue 14:50 Papula, S. Wed 08:50 Pomm, M. D2-539 Raabe, D. Tue 15:50 Paradowska, A. Wed 08:50 Ponge, D. Tue 14:50 Raabe, D. Wed 09:30 Parameswaran, P. Tue 15:50 Ponge, D. Wed 09:30 Raabe, D. Wed 10:40 Pardoen, T. Wed 09:10 Ponge, D. Wed 12:00 Raabe, D. Wed 10:40 Park, H.-S. Tue 15:30, C1-482 Ponge, D. Thu 12:00 Raabe, D. Wed 12:00 Park, J.-C. B6-54 Pontiller, P. C2-285 Raabe, D. Wed 14:30 Partsch, U. A2-752 Popp, M. Wed 18:00, Raabe, D. Wed 15:10 Pasche, G. B1-517 Portella, P.D. WedD3-210 15:50, Raabe, D. Thu 11:20 Paul, J. Thu 09:35 Portella, P.D. TueD3-414 10:40 Raabe, D. Thu 12:00 Paul, J.D.H. B1-272 Posch, G. Thu 14:20 Raabe, D. Thu 12:20 Paul, J.D.H. Thu 10:15 Post, J. B5-435 Raabe, D. Thu 12:40 Pauly, S. Wed 15:30 Pouchon, M.A. D2-756 Rabe, U. Tue 11:20 Paydar, M.H. E2-178 Pouryazdan, M. Tue 17:40, C1-600 Rabizadeh, T. C2-826 Paydar, M.H. B6-179 Pouryazdan, M. Thu 15:20 Rack, A. Wed 10:40 Paydar, M.H. E2-180 Pradella, J. Tue 15:10 Rademann, K. Wed 14:50 Payton, E. Tue 15:10 Prado, L.A.S.A. F1-332 Räthel, J. C4-519 Payton, E.J. Thu 12:40 Prahl, U. B5-372 Raether, F. Wed 17:00 Pazos Perez, N. Wed 14:30 Prahl, U. Tue 14:50 Rafaja, D. B6-429 Pepke, L.-A. Thu 12:00 Prahl, U. Wed 16:40 Rafaja, D. B5-525 Peranio, N. Tue 15:50 Prahl, U. Wed 17:20 Rafaja, D. B5-636 Perets, J. A4-371 Prahl, U. Thu 14:20 Rafaja, D. Tue 12:00, D3-265 Perin, V. Tue 18:00, C2-348 Prange, A. Wed 17:40 Rafaja, D. Tue 12:00, C2-297 Perlich, J. Wed 11:20 Pranzas, P.K. Thu 15:00 Rafaja, D. Tue 12:00, C2-520 Perov, N. A4-138 Prasad, R.M. 0.0-730 Rafaja, D. Tue 11:40 Perti, D. D1-312 Prat, O. E3-106 Rafaja, D. Tue 14:50 Péter, L. Thu 10:35 Presser, J. C4-341 Rafaja, D. Thu 10:35 Peterlik, H. Tue 15:50, A3-154 Preuss, M. Wed 15:50 Raff, J. Wed 11:00 Peterlik, H. Tue 14:50 Preusse, T. A2-480 Ragulya, A. Thu 12:20 Petrov, M. F1-493 Prihodovsky, A. Thu 11:20 Rai, R. Tue 11:20 Petrovic, A. C3-370 Princivalle, A. Thu 10:35 Ram, F. E3-643 Petry, W. Wed 17:20 Prokofiev, E.A. Tue 15:10 Ramond, L. Thu 10:35 Petzow, G. Tue 10:40 Pucher, N. C4-303 Rampedi, L. B1-335 Petzsch, F. Thu 09:55 Pucher, N. Tue 18:00, F5-64 Rampf, M. Wed 14:50 Peukert, W. Tue 16:40 Pyczak, F. Wed 17:40 Randau, C. D1-637 Pfeiffer, F. Wed 09:30 Pyczak, F. Thu 09:35 Rappaz, M. D2-577 Pflumm, R. F1-268 Pyczak, F. Thu 15:00 Ratayski, U. Tue 12:00, C2-520 Pham-Gia, K. Wed 9:50, C1-764 Rath, J. Wed 15:30 Philippi, B. Tue 17:20 Q Rauber, M. Tue 15:10 Pierman, A.-P. Wed 09:10 Qian, T. Tue 18:00, D3-657 Razghandi, K. Wed 18:00 Pierret, S. Wed 08:50 Qin, X. F5-832 Razumovsky, B1-667 Pilipenko, D. B3-373 Qin, X. Thu 14:40 Rebenklau, L. A2-752 Piorra, A. A2-377 Quach, D. C4-169 Recker, D. Wed 11:20 Pirling, T. D2-589 Quandt, E. F5-263 Redenbach, C. Wed 10:40 Pirling, T. Wed 17:40 Quandt, E. A2-470 Reese, S. Tue 12:00, C2-506 Pitonak, R. Tue 14:30 Quandt, E. D1-343 Refle, O. Thu 14:20 Pityana, S.L. B1-335 Quandt, E. A2-377 Rehman, H. Wed 15:50, Plankalayil, J. F3-654 Quandt, E. A2-576 Rehmer, B. WedD3-583 12:00, Plapcianu, C. C4-382 Quandt, E. A2-585 Reich, M. WedD3-202 15:50 Ploshikhin, V. C3-387 Quenzer, H.-J. A2-585 Reimers, W. Tue 17:20 Ploshikhin, V. Thu 11:20 Quirmbach, P. Thu 12:00 Reimers, W. Tue 17:40 Podschuh, R. A4-567 Reinecke, H. A4-13 Podschun, R. Thu 09:35 R Reinholdt, A. Thu 15:00

56 List of Authors

Reisgen, U. Wed 17:20 Roth, S.V. Wed 11:20 Schärfl, W. B3-634 Reisgen, U. Wed 17:20 Roth-Fagaraseanu, D. Thu 14:00 Schäublin, R. B1-517 Reisgen, U. Thu 09:35 Rothenstein, D. Wed 09:30 Schaper, M. Wed 12:00 Reisgen, U. Thu 11:40 Rothkirch, A. Wed 11:20 Schaper, M.K. Wed 15:30 Ren, X.J. D2-494 Rott, A. Tue 14:30 Schaper, M.K. Thu 14:00 Renard, K. Wed 10:40 Rott, G. Tue 17:00 Scharff, P. A4-371 Renusch, D. Wed 11:40 Roungos, V. Thu 09:15 Schattschneider, P. Tue 12:00, A2-466 Renz, A. Tue 12:00, D3-336 Rouquette, S. Thu 14:00 Schaufler, J. C2-457 Renz, P. Tue 15:30, C1-596 Rousseau, B. Wed 09:30 Schebaum, O. Tue 11:20 Repper, J. D2-522 Roy, I. Tue 11:20 Scheerer, H. Tue 18:00, C2-119 Repper, J. Wed 17:20 Rudnik, Y. C3-387 Scheffler, M. Thu 11:40 Requena, G. Thu 14:20 Rudnizki, J. Tue 14:50 Scheiba, F. 0.0-484 Rester, M. Thu 11:40 Rudolphi, M. Wed 11:40 Scheibe, H.-J. Tue 12:00, C2-520 Rethmeier, M. Thu 12:00 Ruhnow, M. Tue 17:00 Scheibel, T. F1-100 Rettenmayr, M. Tue 12:25 Rumpler, M. Tue 18:00 Scheibel, T. Tue 11:00 Reverey, J.F. F5-263 Rupp, D. Thu 12:40 Scheibel, T. Wed 11:20 Reznikova, E. Wed 09:30 Rusconi, M. Wed 17:40 Scheibel, T. Wed 11:40 Rezwan, K. Tue 14:50 Russel, P.S.J. Wed 14:30 Scheible, T. Wed 12:00, F1-518 Rezwan, K. Tue 16:40 Russmüller, G. F5-832 Schell, N. Wed 15:10 Rezwan, R. Thu 11:40 Ryukhtin, V. Wed 08:30 Scheller, P.R. Wed 9:50, B2-39 Richter, D. A2-200 Scheller, P.R. Wed 11:20 Richter, H.-J. Thu 14:20 S Scheller, P.R. Wed 11:40 Ricoeur, A. Thu 09:55 Saad, A. Tue 17:00 Scherer, T. Tue 18:00, D3-462 Ried, P. Wed 08:30 Saage, H. Wed 11:00 Scherer, T. Tue 17:40, C1-600 Riedel, R. 0.0-730 Saccone, A. Wed 15:30 Scherer, T. Wed 08:30 Riedel, R. Tue 17:00 Sachs, C. F1-493 Scherer, T. Thu 12:20 Riedel, R. Wed 09:30 Sadeghi, M. Wed 08:30 Scherf, H. Wed 17:40 Riedl, T. Tue 17:00 Saeed, M.E. Tue 17:40, C1-43 Schestakow, I. Tue 16:40 Rieheman, W. Tue 12:00, D3-749 Saeed-Akbari, A. Thu 14:20 Scheuermann, M. Wed 09:10 Rieth, M. Thu 12:20 Safdar, A. C4-789 Schiller, S. F3-270 Rieu, M. Wed 09:30 Salikov, V. F1-332 Schiller, S. Wed 10:40 Rindasu, V. D2-165 Salit, V. Wed 11:20 Schillinger, B. Wed 11:00 Ritter, U. A4-371 Salmon, M. Tue 15:30 Schimmel, T. F1-656 Ritter, Y. B4-142 Saloman, A. Tue 17:20 Schimmel, T. Wed 15:50 Rode, K. D2-225 Sandhya, R. Tue 15:50 Schimpf, C. Tue 14:50 Rödel, J. Wed 15:50, Sandlöbes, S. Tue 16:40 Schimpf, C. Thu 10:35 Rödel, J. TueD3-132 09:55 Saparin, P. Wed 17:40 Schindler, I. Wed 15:10 Rödel, J. Tue 15:10 Sariolu, F. C1-746 Schlaad, H. F1-226 Rödel, J.R. Wed 11:20 Saruhan, B. Tue 12:00, A2-298 Schlaad, H. Wed 12:00, F1-191 Röhe, S. Tue 15:50, A3-246 Saruhan, B. Wed 11:20 Schläfer, J. Tue 12:00, C1-675 Roelandt, J.M. Wed 11:40 Saruhan-Brings, B. Wed 08:30 Schlarb, A.K. Tue 16:40 Rösler, J. B1-342 Sarvezuk, P.W.C. E2-830 Schlecht, S. D1-312 Rogl, P. Wed 15:30 Saski, S. Wed 11:20 Schleser, M. Wed 17:20 Rohwerder, M. B1-322 Sato, H. B6-476 Schlichting, J. Tue 17:00 Rojacz, H. Wed 12:00, Satzinger, V. C4-355 Schliefer, A. Tue 16:40 Rojas, D. E3-106D3-349 Sauerwald, J. A2-200 Schlosser, M. Tue 14:30 Rolland, J.Y. Wed 09:30 Sauerwald, J. A2-751 Schloth, P. Tue 14:30 Ronninger, C. Tue 15:30, C2-533 Sauerwald, J. A2-453 Schlüter, K. F5-263 Roosen, A. Thu 11:20 Saukkonen, T. Tue 17:40, C1-417 Schmauder, S. D1-673 Rosellini, E. Tue 11:20 Sauvage, X. Tue 17:40 Schmauder, S. A4-217 Rosinski, M. C4-231 Savina, I.N. Tue 15:30 Schmauder, S. C3-387 Ross, U. D1-314 Sax, A. Thu 12:00 Schmidt, B. A2-751 Roters, F. Tue 15:50 Schaaf, P. Tue 12:00, C2-498 Schmidt, C.L. Wed 11:40 Roters, F. Thu 10:35 Schaaf, P. Tue 15:30, C2-533 Schmidt, C.W. Tue 15:30, C1-556 Roters, F. Thu 12:20 Schacherl, R.E. Tue 15:30 Schmidt, C.W. Tue 16:40 Roth, A. Wed 14:30 Schacht, K. Tue 11:00 Schmidt, H. Tue 18:00, C2-605 Roth, G. E3-352 Schäfer, A. D3-633 Schmidt, H. Wed 11:40 Roth, M. Thu 15:00 Schäfer, J. B6-680 Schmidt, M. Wed 14:30

57 List of Authors

Schmidt, V. C4-355 Schulze, V. Wed 17:40 Sladoje, D. C3-447 Schmidtchen, M. Wed 11:00 Schumacher, J. Thu 14:40 Slomski, E.M. Tue 18:00, C2-119 Schmidtchen, M. Wed 17:20 Schwager, H. Wed 15:30 Smith, A. Wed 11:20 Schmidtchen, R. B5-525 Schwartzkopf, M. Wed 11:20 Snis, A. C4-789 Schmidtchen, S. A2-453 Schwarz, M. Tue 14:50 Sokolov, S.F. E3-48 Schmitt, B. D2-756 Schwarz, S. C4-389 Sommer, U. Tue 17:40 Schmitt, C. F1-431 Schwarze, R. A3-345 Sommitsch, C. Wed 16:40 Schmitt, M. A3-67 Schweikart, A. Wed 14:30 Sommitsch, C. Thu 12:20 Schmitt, V. Wed 15:10 Schweikert, N. Wed 08:50 Somson, C. D3-633 Schmitz, G.J. B1-593 Schwentenwein, M. F5-832 Song, J. Thu 11:20 Schmitz, H.-W. Thu 15:00 Schwentenwein, M. Thu 14:40 Song, J.-Y. B6-54 Schmölzer, T. Thu 11:40 Schwikowski, R. D2-522 Souptel, D. Wed 12:00 Schneider, G. Wed 11:40 Sedláková-Ignácová, S. B1-660 Sowiska, A. F5-562 Schneider, G.A. F1-332 Seeman, K. A2-635 Sowiska, A. F5-565 Schneider, G.A. Wed 12:00, F1-339 Seide, G. E3-352 Soydan, A.M. Tue 15:30, C1-586 Schneider, G.A. Wed 09:50 Seide, G. Wed 9:50, C1-570 Spaepen, F. Tue 10:40 Schneider, H.-C. Tue 10:40 Seidel, R. F1-431 Speck, O. Wed 14:50 Schneider, J.M. Tue 11:20 Seifert, H.J. B6-429 Speck, T. F1-431 Schneider, J.M. Thu 14:40 Seifert, H.-J.- C4-519 Speck, T. Wed 14:50 Schneider, W. E2-102 Seifert, H.J. Tue 17:20 Speck, T. Wed 17:00 Schnettler, R. Tue 17:40 Seifi, M. E2-774 Spengler, J. B5-364 Schnubel, D. Thu 12:40 Senk, D. Thu 11:20 Spieß, K. Wed 11:20 Schöbel, M. Thu 11:40 Senöz, C. B1-322 Spohn, U. Thu 10:15 Schöpe, H.J. E3-521 Sepelak, V. A2-502 Springer, H. Thu 12:40 Schöpe, H.J. E3-532 Sepelák, V. Wed 09:10 Staab, T. Wed 15:10 Schöpe, H.J. Tue 12:00 Sethmann, I. Tue 15:10 Stadlmann, K. C4-355 Scholtes, B. Tue 17:00 Shackelford, J.F. C4-211 Stadlmann, K. Tue 18:00, F5-64 Schreiber, A. F3-270 Shackelford, J.K. C4-212 Stadlmann, K. Thu 15:00 Schreiber, G. B5-525 Shao, L. Tue 15:30 Staehlke, S. Thu 10:35 Schreyer, A. D2-365 Shao, W. A3-213 Stampfl, J. C4-303 Schreyer, A. D2-539 Shash, Y. Tue 17:40, C1-43 Stampfl, J. C4-355 Schreyer, A. Tue 17:20 Shen, H. Tue 12:00, C1-675 Stampfl, J. F5-832 Schreyer, A. Wed 09:30 Shen, H. Tue 12:00, C1-672 Stampfl, J. Tue 18:00, F5-64 Schreyer, A. Wed 14:30 Shen, H. Wed 09:10 Stampfl, J. Thu 14:40 Schreyer, A. Wed 15:10 Shevchenko, R. Tue 15:30 Stampfl, J. Thu 15:00 Schreyer, A. Wed 16:40 Shevchenko, T. Wed 12:00, Stark, A. Thu 09:35 Schreyer, A. Thu 12:40 Shinoda, K. 0.0-21C1-464 Stark, N. E2-102 Schreyer, A. Thu 15:00 Shinoda, K. Wed 15:50, D3-59 Starke, P. Wed 18:00, Schröder, K. Thu 14:20 Shiota, I. Wed 11:20 Starke, P. WedD3-300 17:40 Schryvers, D. Wed 10:40 Shipway, P. D1-107 Staron, P. D2-365 Schucknecht, T. Thu 10:35 Shvindeleman, L.S. Thu 14:00 Staron, P. Wed 14:30 Schüler, D. F1-286 Siemers, C. B1-342 Staron, P. Thu 12:40 Schüler, K. Tue 17:20 Sietsma, J. D1-828 Stefanescu, F. D2-165 Schürmann, U. D1-312 Sigl, L. Tue 11:20 Steier, V. A4-13 Schüttenberg, S. Wed 15:10 Siklos, M. C4-303 Stein, F. B1-534 Schütze, M. F1-268 Silva, K.L. E2-830 Stein, F. B1-593 Schütze, M. Wed 11:40 Silva, W.M. Thu 10:35 Stein, F. Wed 10:40 Schuhmann, W. B1-322 Simancik, F. B5-682 Stein, L. Thu 09:35 Schulte, K. F1-332 Simek, D. B5-525 Steinbach, I. E3-153 Schultheiß, S. Tue 15:10 Simek, D. B5-636 Steinbach, I. Tue 14:30 Schultz, L. B6-218 Simo, A. Wed 14:50 Steinborn, G. B3-469 Schultz, L. B6-318 Singh, V. Tue 15:50 Steinbrech, R.W. Thu 10:15 Schultz, L. Wed 09:50 Sinning, H.-R. Tue 12:00, D3-749 Steiners, M. Thu 09:35 Schultz, L. Thu 15:20 Skiera, E. Thu 10:15 Steinmann, W. E3-352 Schulz, M. A2-594 Skrotzki, B. Wed 12:00, Steinmetz, D. Thu 10:35 Schulz, M. Tue 11:00 Skrotzki, B. TueD3-202 10:40 Stenzel, C. Tue 11:00 Schulz, M. Wed 10:40 Skrotzki, B. Wed 11:00 Stevan, S. C3-370 Schulz, U. F1-139 Skrotzki, W. Thu 10:35 Stevens, N. Wed 15:10

58 List of Authors

Stockinger, M. Wed 17:20 Thomas, A. Tue 11:20 van Benthem, K. Thu 12:00 Stöcker, H. Wed 12:00 Thomas, I. Tue 11:40 van Buuren, A. Tue 14:30 Stöger-Pollach, M. Tue 12:00, A2-466 Thomas, P. Tue 11:20 van der Biest, O. Thu 12:40 Stoica, M. Thu 14:40 Thoss, F. B4-423 Van Petegem, S. D2-756 Stoschka, M. Thu 15:20 Threadgrill, P.L. Wed 15:50 Van Petegem, S. Tue 17:40 Straub, T. B6-359 Thron, A.M. Thu 12:00 Van Petegem, S. Wed 15:30 Strauß, C. Thu 14:20 Tie, D. F5-37 Van Petegen, S. Tue 14:30 Strehl, G. D3-141 Tillmann, W. Tue 15:30, C2-74 Van Petegern, S. D2-320 Struis, R.P.W.J. Wed 09:50 Tillmann, W. Thu 09:55 Van Petegern, S. 0.0-444 Strunskus, T. A2-576 Tkachenko, K. E2-621 Van petegern, S. Wed 11:40 Strunskus, T. A4-567 Todd, I. D1-792 Van Swygenhoven, H. D2-320 Strunskus, T. A4-591 Todoshchenko, O. Tue 17:40, C1-417 Van Swygenhoven, H. D2-756 Strunskus, T. Thu 09:35 Todoshchenko, O. Wed 08:50 Van Swygenhoven, H. Tue 14:30 Stüber, M. A2-635 Toews, K.D. Thu 12:40 Van Swygenhoven, H. Tue 17:40 Stüber, S. Wed 9:50, D3-316 Toimil-Molares, M.E. Tue 15:10 Van Swygenhoven, H. Wed 08:50 Stukowski, A. B6-680 Tolstosheeva, E. C4-669 Van Swygenhoven, H. Wed 11:40 Sturm, D. B1-593 Torgersen, J. Tue 18:00, F5-64 Van Swygenhoven, H. Wed 15:30 Sturm, H. C4-669 Touková, J. A4-755 Van 0.0-444 Su, X.X. D2-494 Tourret, D. E3-90 VanSwygenhoven-Moens, H. Tue 13:45 Suffner, J. Thu 15:20 Tousek, J. A4-755 Vander,Swygenhoven-Moens, A. H. B4-702 Suhre, M.H. Wed 11:40 Traiphol, N. A4-416 Vannod, J. D2-577 Susila, P. Tue 14:30 Traiphol, R. A4-416 Vanovsek, W. Thu 14:20 Suty, M. Tue 10:40 Tran, T. C4-211 Varga, F. F5-832 Suzuki, S. 0.0-21 Tran, T. C4-212 Varga, F. Thu 14:40 Suzuki, S. Wed 15:50, D3-59 Tran, T. Thu 10:15 Varga, M. Wed 12:00, Svendsen, B. Wed 12:00 Trassl, S. Wed 15:10 Vasilescu, E. TueD3-349 18:00, F5-189 Svensson, M. Thu 14:00 Traykova, T. Wed 12:00, F1-696 Vasilyev, A. E3-48 Svoboda, J. Tue 17:00 Treccani, L. Tue 14:50 Vasilyev, A. E2-20 Svoboda, J. Tue 17:40 Treccani, L. Tue 16:40 Vasilyev, A.A. E2-66 Swain, M.V. Wed 09:50 Treccani, L. Thu 11:40 Veehmayer, M. Thu 11:20 Swieszkowski, W. F5-317 Tredici, I. Thu 09:15 Vehoff, H. B1-664 Sytchev, J. D2-741 Triebel, C. Tue 17:40 Vehoff, H. Tue 18:00, D3-657 Szawnowski, J. C4-231 Troßmann, T. F1-135 Vehoff, H. Tue 11:40 Troßmann, T. Tue 18:00, C2-119 Vehoff, H. Tue 17:20 T Troßmann, T. Tue 15:30, C2-118 Veith, M. C4-670 Ta, M.-T. Wed 09:30 Trucatto, M. C4-382 Velickovic, B. C3-447 Tabatabaei, Y. E2-774 Truszkowski, T. F5-562 Verdes, B.-A. E2-825 Takagi, H. E2-175 Truszkowski, T. F5-565 Veres, D. B3-630 Takahashi, R. D2-127 Tsakiropoulos, P. D1-792 Veron, E. Wed 09:30 Takahashi, T. Tue 11:20 Tschichholz, G. B3-469 Vetter, M. Wed 17:00 Takeshi, G. C4-36 Tsykhonia, A. Wed 12:00, Veyssière, P. Thu 12:00 Takeuchi, I. D2-127 Tu, H.Y. C3-387C1-464 Vidrich, G. Tue 12:00, D3-749 Talík, M. Wed 10:40 Türeyen, K. Tue 18:00, F5-439 Villaret, V. Thu 14:00 Tamehiro, H. E2-175 Turley, F. Thu 14:00 Viswanath, R.N. Tue 15:30 Tanaka, K. Wed 11:20 Vitek, V. Thu 12:40 Tatschev, D. Thu 15:00 U Vlasak, T. Wed 10:40 Tcherdyntsev, V. Tue 17:20 Übeyl, M. D3-360 Vlasova, E. A4-652 Tekkaya, E. Wed 12:00 Übeyli, M. Tue 18:00, F5-439 Völkl, R. B6-488 Telle, R. Tue 18:00, C2-605 Uhlmann, I. Tue 15:10 Völkl, R. B6-489 Teryaev, D. E2-621 Ulbricht, D. A4-354 Volkmann, T. E3-90 Thackray, R. D1-792 Ulbricht, D. C2-346 von Appen, J. Thu 09:15 Theisen, W. Tue 18:00, C2-650 Ulrich, S. A2-635 von Byern, J. Thu 12:00 Theisen, W. Tue 12:00, C2-506 Urlau, U. Wed 09:30 von Gynz-Rekowski, C. B3-235 Theisen, W. Wed 9:50, B2-455 von Hagen, R. Tue 12:00, C1-675 Theisen, W. Thu 14:40 V von Klinski-Wetzel, K. Tue 12:10 Thiel, K. Thu 12:00 Vainio, U. Thu 15:00 von Niessen, K. Tue 16:40 Thielen, M. F1-431 Valeriani, A. Wed 17:40 von Petzold, J. B5-507 Tholey, M. E3-340 Valiev, R.Z. Tue 15:10 von Woedtke, T. Thu 14:20

59 List of Authors

Vor, H. Wed 17:40 Weiß, A. Wed 11:20 Wolf, S. Wed 9:50, B2-39 Voß, S. Wed 10:40 Weiß, A. Wed 11:40 Wolf, S. Wed 11:20 Vovchenko, L.L. A4-371 Weißbach, T. Wed 12:00 Wolf, S. Wed 11:40 Vukicevic, M. C3-370 Weisser, M. Wed 15:30 Wolff, M. F1-332 Vukicevic, M. C3-447 Weissmüller, J. Tue 15:30, C1-597 Wolinski, P. Wed 9:50, B2-157 Vukicevic, M. C3-370 Weissmüller, J. Tue 15:30 Woltermann, E. A2-585 Vukicevic, M. Wed 17:40 Welter, E. Wed 12:00 Wondraczek, L. B4-702 Welter, E. Thu 15:00 Wondraczek, L. Wed 14:30 W Weltmann, K.-D. Thu 14:20 Wondraczek, L. Wed 18:00 Wackermann, K. Tue 15:10 Wendrock, H. Wed 11:00 Woodcock, T. Wed 17:00 Wagner, B. A2-585 Wenisch, S. Tue 17:40 Wu, K. D1-637 Wagner, G. Wed 15:10 Wenzel, C. Thu 09:55 Wu, K. Tue 15:30, C1-482 Wagner, J.B. Wed 14:50 Wenzel, M. D2-225 Wu, M. Wed 08:50 Wagner, K. F1-135 Werner, C. C4-669 Wu, Q. B6-538 Wagner, M. D3-141 Werner, C. Tue 11:40 Wu, Q. Wed 9:50, D3-543 Wagner, M. Wed 18:00, Werner, C. Thu 09:15 Wu, X. Wed 15:10 Wagner, M. TueD3-210 17:00 Werner, E. Wed 17:20 Wüller, E. Tue 16:40 Wagner, M.F.-X. D3-253 Werre, P. E3-521 Wüst, J. D2-225 Wagner, S. D3-253 Weygand, S.M. Thu 12:40 Wüstefeld, C. Tue 12:00, C2-297 Wagner, S. Tue 17:00 Wielage, B. C2-706 Wuestefeld, C. Tue 11:40 Walheim, S. F1-656 Wierzcho, T. F5-562 Wulfhorst, J. Wed 9:50, C1-570 Wall, B. Tue 10:40 Wierzcho, T. F5-565 Wunderlich, F. Wed 12:00 Walles, H. Thu 09:55 Wierzchon, T. Tue 15:30, C2-568 Wunderlich, G. Thu 12:20 Walter, S. E3-352 Wierzo, T. B6-563 Wunderlich, W. C4-36 Wang, D. A2-502 Wiesmann, J. D1-314 Wurster, S. Thu 09:55 Wang, D. Tue 17:40, C1-600 Wietbrock, B. Thu 11:40 Wuttig, M. A2-377 Wang, D. Wed 14:30 Wildau, M. Tue 15:30 Wuttig, M. Thu 15:40 Wang, D. Thu 15:20 Wilde, F. Wed 16:40 Wang, G. Thu 14:40 Wilden, J. Tue 15:30, C2-533 X Wang, Q. Tue 18:00 Wilhelm, M. Wed 10:40 Xia, H. A2-453 Wang, X. 0.0-615 Wilke, M. Tue 12:00, C2-498 Xiao, L. Tue 12:00, C1-675 Wang, Y.M. 0.0-615 Wilker, V. Thu 11:40 Wang, Y.M. Wed 08:50 Willert-Porada, M. C2-285 Y Wannabaipoon, S. Wed 11:20 Willert-Porada, M. Tue 15:30, C1-482 Yagodzinskyy, Y. Tue 17:40, C1-417 Warchomicka, F. Wed 17:20 Willert-Porada, M. Wed 15:10 Yagodzinskyy, Y. Wed 08:50 Warzecha, M. Wed 9:50, B2-157 Willert-Porada, M. Thu 11:20 Yan, X. Wed 15:30 Watanabe, Y. B6-476 Willey, T. Tue 14:30 Yetik, H. Tue 18:00, F5-439 Weber, A. F3-654 Williams, J. Wed 15:50, Yi, S. Tue 16:40 Weber, G. Thu 12:00 Willumeit, R. F5-37D3-414 Yildiz, Ö. Tue 15:30, C1-586 Weber, O. Wed 10:40 Wimpory, R. Thu 11:40 Yilmaz, E. B6-624 Weber, S. Tue 18:00, C2-650 Winkler, M. Tue 15:30, C1-556 Yíma, V. Wed 15:10 Weber, S. Wed 9:50, B2-455 Winning, M. Tue 14:50 Yind, D. Tue 18:00 Weber, S. Tue 11:55 Winning, M. Wed 10:40 Yoo, J. Thu 14:40 Weber, S. Thu 14:40 Winning, M. Wed 14:30 Yoon, B. Thu 09:15 Weber, U. A4-217 Winzer, J.S. Wed 11:20 Yoon, K.H. Tue 15:30, C1-596 Weber, U. C3-387 Wirjadi, O. Wed 10:40 Yoon, W.-S. Wed 08:50 Wei, L.Y. C4-789 Wirth, I. Thu 14:40 Young, M.L. D2-127 Weidner, A. Wed 14:50 Witt, U. Tue 15:50 Yüce, A. Tue 12:00, A2-298 Weiler, L. Wed 11:20 Witte, F. Tue 17:20 Yüce, A. Wed 11:20 Weinberger, M. Tue 14:50 Wittstock, A. Tue 15:50, A3-246 Yukawa, H. B6-822 Weinberger, T. Wed 16:40 Witusiewicz, V. Wed 16:40 Yumoto, A. Wed 11:20 Weiner, S. Wed 08:30 Wörner, C. Wed 12:00, Weinert, U. Wed 11:00 Wohner, N. A4-567D3-368 Z Weinkamer, R. Wed 17:40 Wojarski, L. Thu 09:55 Zaefferer, S. E3-643 Weinmann, W. Tue 17:20 Wolf, F.G. A3-67 Zaefferer, S. Tue 11:20 Weirich, T.E. Thu 15:00 Wolf, M. B3-351 Zaefferer, S. Tue 11:40 Weis, A. F1-656 Wolf, M. Thu 11:40 Zaefferer, S. Tue 14:50 Weiß, A. Wed 9:50, B2-39 Wolf, S. Tue 12:00, D3-265 Zaefferer, S. Tue 16:40

60 List of Authors

Zaefferer, S. Wed 14:30 Zaefferer, S. Wed 17:00 Zaefferer, S. Thu 12:20 Zaghrioui, M. Wed 09:30 Zajak, D. Thu 15:00 Zajickova, L. Tue 18:00, C2-348 Zamanzade, M. B1-664 Zambaldi, C. Thu 12:20 Zametta, R. Tue 15:10 Zamponi, C. F5-263 Zamponi, C. A2-470 Zander, D. Thu 15:20 Zaporojtchenko, V. A4-567 Zaporojtchenko, V. A2-576 Zaporojtchenko, V. A4-591 Zaporojtchenko, V. Tue 18:00 Zaporojtchenko, V. Thu 09:35 Zarei, Z. C2-826 Zarnetta, R. D2-127 Zaslansky, P. Wed 12:00, F1-696 Zeffiro, A. Thu 09:15 Zeng, M. Tue 14:30 Zeng, X.H. Thu 12:40 Zenker, R. C2-103 Zhang, F. C4-162 Zhang, F. Tue 17:00 Zhang, W. B3-351 Zhao karger, Z. Wed 14:30 Zheng, M.Y. D1-637 Zheng, N. Thu 14:40 Zhong, Y. Tue 15:30, C1-597 Zhou, J. Thu 10:15 Zhu, L.-F. Tue 16:40 Ziaei Rad, S. D1-673 Zielasek, V. Tue 15:50, A3-246 Zigler, A. F1-493 Zillmann, B. Wed 18:00, Zimmermann, J. D2-756D3-146 Zimmermann, J. D2-320 Zimmermann, J. Tue 17:40 Zimmermann, J. Wed 11:40 Zimmermann, M. Wed 18:00 Zlotnikov, I. Wed 12:00, F1-191 Zoch, H.-W. Wed 15:30 Zöllmer, V. C4-669 Zöllmer, V. Tue 11:40 Zöllmer, V. Thu 14:40 Zollfrank, C. Wed 09:10 Zoughi, M. C2-824 Zschomak, M. Wed 12:00 Zschuppe, M. Tue 17:00

r t

S H

r e

e i t n r

h u

f e

k i m n

a S e r c r F h l S o t s r s e a g ß a ß r a e t tr e s n s s iu t t r ra a k ß n e a P straße schläger Kantplatz Laute Herrngarten ße M M tra a ls a u hu g e sc d r ch a s o le tr H n a e ß n e s t ra ß e

Willy -Brandt-Platz Welcome Hotel H MSE Side Events Hessisches Staatsarchiv

DGM-Tag 2010 H

Building S3/20 S c ße h l L e Exner Memorial u i e i e s r Hessisches d e m a n Landesmuseum n a e s c m t o r h r a P e e r- ß r traß e s e ers u t nd a r P xa h a Ale P en ß ll e -O ch karo 5 ri E Fr iedensplatz MSE 2010 e sstraß ughau e Ze rmstraß

Rundetu

e c

b s

r t

s e

l P

c S Ernst- Lan dgraf -G eorg-S traß e Ludwigs - Luisenplatz H Schloss platz H Marktplatz P

E r n

e L s

W u t ß - i L a

i s r u l t e h

d s n e w z s l l g m t a o t i d r an g L a H en i t - l n ß S e e t n r a s

t ß r e e a ß ß a r e t s ig w

Congress Office c/o Deutsche Gesellschaft für Materialkunde Senckenberganlage 10 60325 Frankfurt Germany P +4 9- 69-75306 747 F +4 9- 69-75306 733 [email protected] www.mse-congress.de