. n o i s i c e r p

d n a m e d

o h w

e

FLOs W o h t

r o f

s n o i t u l G o O s

L r A e t T e A C m

E w N o l I F L

T C U D O R P Industrial Flow Meters

VORTEX / InnovaMass Flow Range (30:1 turndown) INLINE VERSION • Liquids: Accuracy Models 1.0 ft/s (0.3 m/s) Velocity Min. • Mass flow: +/-1.0% of reading (liquids); • 240i Inline 30 ft/s (9.14 m/s) Velocity Max. +/-1.5% of reading (gas & steam) • 241i Insertion • Gas & Steam: • Volumetric: +/-0.7% of reading (liquids); Velocity Minimum / +/-1.0% of reading (gas & steam) Description ρ = fluid density • Completely re-designed “iSeries” Repeatability • Mass flow: +/- 0.2% of reading • 5-in-1: Mass & volumetric flow rate, • Volumetric: +/- 0.1% of reading temperature, pressure, density Velocity Maximum / 300 ft/s (91.5 m/s) Note 1: in lb /ft 3 Note 2: in kg/m 3 INSERTION VERSION • Raptor II OS for best performance ρ m ρ • New Applications: FloPro™, qMix™, Accuracy Digital Communications • Mass flow: +/-1.2% of reading (liquids); Dial-A-Pipe™, Dial-A-Fluid™, ValidCal™ • HART, Modbus, Profibus DP, Foundation +/-2.0% of reading (gas & steam) • Field firmware upgrade capability Fieldbus, USB, RS-232 • Volumetric: +/-1.0% of reading (liquids); • Thermal energy / BTU measurement Hazardous Area Approvals +/-1.5% of reading (gas & steam) InnovaMass® Fluids Measured • CE, cFMus, ATEX, PED, IECEx Repeatability • Steam, Gases, and Liquids • Mass flow: +/- 0.2% of reading • Volumetric: +/- 0.1% of reading

ULTRASONIC / InnovaSonic • Buy online from stock, next day shipping Accuracy & Repeatability • Rental programs Models 203 Fixed Installation (Economical) • Accuracy: +/- 1.0% of reading from • 203 Fixed installation economical Fluids Measured 0.16 ft/s to 40 ft/s (0.05 m/s to 12 m/s) • 205i Fixed installation • Water and liquids; Tolerant of liquids • Repeatability: +/- 0.3% of reading • 210i Portable with small amounts of air bubbles or suspended solids 205i Fixed Installation Description • Accuracy: +/- 0.5% of reading from • Transit-time ultrasonic Flow Range (30:1 turndown) 0.16 ft/s to 40 ft/s (0.05 m/s to 12 m/s) • Clamp-on outside of pipe for easy set up • Bi-directional flow range of 0.16 ft/s • Repeatability: +/- 0.15% of reading • No pipe cutting or process shutdown to 40 ft/s (0.05 to 12 m/s) 210i Portable • Fixed installation and portable versions • Pipe sizes from 2 to 236 inches • Accuracy: +/- 0.5% of reading from • High accuracy at low and high flows (50 to 6000mm) 0.16 ft/s to 40 ft/s (0.05 m/s to 12 m/s) • Bi-directional flow Digital Communications • Repeatability: +/- 0.3% of reading • Thermal energy/BTU measurement • RS-232, RS-485, Modbus RTU InnovaSonic®

FLOW/LEVEL SWITCH Fluids Measured Operating Temperature Range InnovaSwitch • Gases and liquids • Standard -100°F to 390°F Models Accuracy (-73.3°C to 200°C) • Medium Temperature to 572°F • 615 • Range of 0.01 to 5 sfps (0.003 to (300°C) 1.524 smps) in liquids and 0.1 to Description • High Temperature to 850°F (454.4°C) • Ultra sensitive with fast response time 500 sfps (0.03 to 152.4 smps) gases • Switches on a flow/no flow condition Repeatability • Ideal for industrial pump protection • +/- 1% of set point (Flow) or • Unique high temperature to 850°F (454°C) 1/32" (0.8mm) Level • 2-year workmanship warranty Stability • Buy online, next day shipment • Drift <0.5% from calibrated set point over a range of +/-50°F

InnovaSwitch®

CONDITIONERS / FlowTrak • May be used in very large diameter pipes • Two 90° Elbows Different Planes: • Designed for use with ANY point velocity FlowTrak (3); Orifice plate (62) Description flow measurement device • Reducer - 4/1: FlowTrak (3); Orifice • Creates uniform flow profile to maximize plate (14) accuracy in constrained piping areas Fluids Measured • Gas metering applications • Globe Valve - Fully Open: FlowTrak (2); • Reduce upstream piping diameters to Orifice plate (32) less than 3 diameters Straight Length Improvement • Use upstream of any gas flow meter Diameters relative to flow profile • Proven Dual-Plate inline flow disturbance in brackets ( ) conditioning technology • One 90° Elbow: FlowTrak (1); Orifice • Creates uniform flow profile at an plate (28) economical price • Two 90° Elbows Same Plane: FlowTrak (3); • Low pressure drop Orifice plate (36)

FlowTrak TM Select by Application

GAS / Industrial GAS / MFCs – OEM & Scientific GAS / Calibration • InnovaMass 240i, 241i (Vortex) • SmartTrak 100 (Capillary Thermal) • CalTrak 500, 800, XL • QuadraTherm 640i, 780i (Thermal) • SmartTrak 50 (Capillary Thermal) (Primary standard piston prover) • SteelTrak 640S, 780S (Thermal) • SideTrak 840 (Capillary Thermal) LIQUID • BoilerTrak 620S (Thermal) • TopTrak 820, 820S (Capillary Thermal) • InnovaSonic 203, 205i, 210i (Ultrasonic) • FastFlo 620S (Thermal) • Specialty MFCs – Low flow, IP67, Low • InnovaMass 240i, 241i (Vortex) • InnovaSwitch Flow/Level 615 DeltaP, High Pressure (Capillary Thermal) • InnovaSwitch Flow/Level 615 (Thermal) (Thermal) • FloBox – Digital Control / Power Supplies STEAM GAS / Flow Conditioning GAS / Control Valves • InnovaMass 240i, 241i (Vortex) • FlowTrak (Dual-Plate Inline) • SmartVO (Electromagnetic proportional) • InnovaSwitch Flow/Level 615 (Thermal)

THERMAL MASS / QuadraTherm • Free user software Accurac y * • Change gas in the field Models 780i Inline • Change pipe size in field (insertion version) • +/- 0.5% of reading above 50% of full scale • 640i Insertion Probe • Validate in field for in-situ calibration 640i Insertion • 780i Inline • Certified for GHG measurement meeting • +/- 0.75% of reading above 50% of full scale Description EPA (40 CFR Part 98) * Verified by an independent NIST & • Highest accuracy thermal meter in the world • Hazardous-area location approvals NVLAP accredited lab • Multivariable outputs: Mass flow rate, • Buy online, next day shipment Repeatability temperature, pressure Fluids Measured • Patented "QuadraTherm" 4-Sensor • +/- 0.15% of full scale • Measure all inert gases and all non- thermal technology condensing clean gases Digital Communications • Patented no-drift DrySense™ sensor, • Foundation Fieldbus, HART, • Flammable gases lifetime warranty Modbus RTU, and Profibus DP Flow Ranges (100:1 Turndown) • Inline version has built-in flow conditioning Hazardous Area Approvals • Very low flows and high flows up to • No moving parts, low pressure drop, • cFMus, ATEX, IECEx, PED, GOST R, QuadraTherm® 60,000 scfm (305 smps) high 100:1 turndown Chinese Pattern, CE

THERMAL MASS • Inline version built-in flow conditioning for Flow Range (100:1 Turndown) SteelTrak & SteelMass only 3-diameters up, zero downstream • Wide flow range from 0 to 20,000 sfpm • Free user software (100 smps) Models • Validate in field for in-situ calibration • SteelMass 640S Insertion probe • Economical NEMA 4X enclosure available Accuracy • MultiTrak 670S Multi-point insertion • High temperature to 800°F (430°C) • +/- 1.0% of reading plus +/-0.5% of • SteelTrak 780S Inline available full scale • SteelTrak 780S Inline Ultra High Purity • Axial and purge designs for dirty gases Repeatability Description • Certified for GHG measurement meeting • +/- 0.2% of full scale EPA (40 CFR Part 98) • Insertion, Inline and multi point Digital Communications • Hazardous-area location approvals configurations • Foundation Fieldbus, HART, • Patented no-drift DrySense™ sensor, Fluids Measured Modbus RTU, and Profibus DP lifetime warranty • All inert gases and all non-condensing Hazardous Area Approvals • No moving parts, low pressure drop, clean gases • FM, CSA, CRN, ATEX, PED, GOST R, high turndown 100:1 • Flammable gases Chinese Pattern, CE SteelTrak® / SteelMass® • Insertion and inline, totalizing gas mass flow

THERMAL MASS • Validate in the field for easy in-situ Fluids Measured BoilerTrak & FastFlo calibration FastFlo 620S • Certified for GHG measurement meeting • Measure all inert gases and all non- Models EPA (40 CFR Part 98) condensing clean gases • BoilerTrak 620S-BT Insertion probe • Easily install in the field or retrofit BoilerTrak 620S-BT • FastFlo 620S Insertion probe • Buy online, next day shipment • Flammable gases: methane, propane, natural gas Description Flow Range (100:1 Turndown) • Increase efficiency with fast response • Wide flow range from 0 to 20,000 sfpm Hazardous Area Approvals time within 200 milliseconds (100 mps) • CE, GOST R, Chinese Pattern • No moving parts, low pressure drop, high turndown 100:1 Accuracy • BoilerTrak optimized for methane, • +/- 1% of full scale propane and natural gas Repeatability • FastFlo optimized for air, nitrogen, and • +/- 0.2% of full scale inert gas measurement TM Digital Communications BoilerTrak • Free user software • Modbus RTU Mass Flow Meters, Controllers & Valves

DIGITAL / SmartTrak 100 • Proprietary frictionless-hovering, Repeatability direct-acting control/shut-off valve • +/- 0.2% of full scale Models • User-friendly pilot module display • 100L Low Flow interface is front-mounted, hand-held, Digital Communications • 100M Medium Flow or remote mounted • Foundation Fieldbus, Modbus RTU, • 100H High Flow • Leak integrity 5 x 10 -9 smL/sec of helium and Profibus DP Description • CE Approved Flow Range • Highest performance multi-gas MFC • Buy online, next day shipment (Turndown - Meters 100:1 / Controllers 50:1) • Flagship mass flow meter & controller Fluids Measured 100L Low Flow • Navigate easily with large multi-function • All clean gases including toxics and • 0 to 10 sccm (smlm) to 0 to 50 slpm (nlpm) display interface corrosives 100M Medium Flow • Free user software • Dial-A-Gas allows you to change • 0 to 300 slpm (nlpm) • Primary Standard calibration & NIST between 10 gases with one unit 100H High Flow traceability • 0 to 1000 slpm (nlpm) Accuracy • Make adjustments in the field Higher & lower flows available upon request • +/- 1.0% of full scale SmartTrak® 100 • Configure up to 10 gasses • +/- 0.5% of full scale available

DIGITAL / SmartTrak 50 • Compact size makes drop-in Repeatability replacement easy Models • +/- 0.25% of full scale • Local display and digital setpoint • 50L Low Flow • Optional analog setpoint/output signals Digital Communications • 50M Medium Flow • Field adjustable zero and span • RS-232, RS-485 (Multi-drop) Description • Primary Standard calibration & NIST Flow Range • Economical digital mass flow meter traceability (Turndown - Meters 100:1 / Controllers 50:1) and controler • Leak integrity 1 x 10 9 smL/sec of helium 50L Low Flow • Powerful digital high-performance at • CE Approved • 0 to 10 sccm (smlm) to 0 to 50 slpm (nlpm) OEM pricing • Buy online, next day shipment 50M Medium Flow • Save money with volume discounts Fluids Measured • 0 to 200 slpm (nlpm) • Navigate easily with large display Higher flows available upon request • All clean gases including toxics and • Free user software corrosives • Choice of aluminum or 316 stainless- steel construction Accuracy SmartTrak® 50 • +/- 1.0% of full scale

DIGITAL / Specialty MFCs • High pressure up to 5000 psig Flow Range (345 barg) Models (Turndown - Meters 100:1 / Controllers 50:1) • Many other versions available, • Mass flow rates up to 1000 slpm (nlpm); • MicroTrak 101 Ultra Low Flow consult factory higher upon request • SmartTrak 140 Ultra Low Delta P • Leak integrity 5 x 10 -9 smL/sec of • Low flow ranges under 4 sccm (smlm), • SmartTrak 100-HP Ultra High Pressure helium with a minimum controllable mass flow rate • MaxTrak 180 Industrial NEMA 6 (IP67) • Free user software of 0.1 sccm (smlm) Description • CE Approved Digital Communications • Digital MFC’s engineered for Fluids Measured (may vary based on version) challenging applications • All clean gases including toxics and • Foundation Fieldbus, Modbus RTU, • Ultra-low flow rates down to 0.1 corrosives and Profibus DP sccm (smlm) • Ultra-low pressure drop ΔP of 4.5 Accuracy psid (310 mBard) • +/- 1.0% of full scale • Industrial approval ratings of NEMA Specialty MFCs Repeatability 6 & IP67 ratings • +/- 0.2% of full scale

CONTROL VALVES / SmartVO • Valve designed with positive shut off Control Range • Aluminum and 316L stainless steel • 0 to 100%, control signal dependent Models construction • VO-100L Low Flow • Single sided 10-30 VDC input power Flow Ranges • VO-100M Medium Flow reduces installation cost and • 0 to 10 sccm to 0 to 1000 slpm • VO-100H High Flow complexity • Ultra-low flow rates down to 0.1 • VO-100HP High Pressure • Leak integrity 5 x 10 -9 smL/sec of sccm (smlm) • VO-101 Ultra Low Flow helium • High pressure up to 5000 psig Description • CE Approved (345 barg) • Fast-response control valve • Buy Online, next day shipment • Proprietary frictionless-hovering Fluids Measured direct-acting control valve • All clean gases including corrosives • Operate over a wide pressure and toxics differential range • Many choices of fitting and elastomers SmartVO TM Valve Mass Flow Meters, Controllers & Valves

ECONOMICAL MFC / SideTrak • Leak integrity 1 x 10 9 smL/sec of Flow Ranges (50:1 Turndown) helium Models 840L Low Flow • CE Approved • 0 to 15 slpm (nlpm) • 840L Low Flow 840M Medium Flow • 840M Medium Flow Fluids Measured • 0 to 100 slpm (nlpm) • 840H High Flow • All clean gases including toxics, 840H High Flow corrosives and combustibles Description • 0 to 500 slpm (nlpm) • Dependable analog mass flow control Accuracy Higher flows available upon request for over 30 years • +/- 1.0% of full scale • Cleanable sensor tube for dirty gases Repeatability • Precision control with low pressure drop • +/- 0.5% of full scale • Count on durability with rugged construction • Available in wide variety of enclosures, process connections, input/output SideTrak® options and control electronics

ECONOMICAL MFC / TopTrak • Precision measurement with low Flow Ranges (100:1 Turndown) pressure drop Models 820 Nylon • CE Approved • 0 to 50 slpm (nlpm) • 820 Nylon 820 Aluminum • 820S Stainless Steel Fluids Measured • 0 to 175 slpm (nlpm) • 826 Aluminum • All clean gases; check compatibility with wetted materials 820S Stainless Steel Description • 0 to 500 slpm (nlpm) • Proven flow measurement with Accuracy Higher flows available upon request affordable OEM pricing • +/- 1.5% of full scale • Choice of nylon, aluminum or Repeatability stainless-steel construction • +/- 0.5% of full scale • Save money with volume discounts • Large, tiltable display readout • Compact size makes drop-in replacement easy TopTrak ®

DIGITAL CONTROL Features Programmable Functions FloBox • Power input: 100, 110 or 240 VAC (Model 954 four independent channels): (specify when ordering), 50/60 Hz • Valve override: Run, Close, Purge Description • Power output: +/- 15 VDC, 250-500 mA • Display flow or totalizer • Feature packed digital performance • Signal input from device: User • Engineering units for analog MFC's selectable: 0-5 & 0-10 VDC, 4-20 mA • Gas name/symbol • Large digital display with pushbuttons • Analog output: Set point and output • A/D filter rate • Power one to four units user selectable 0-5 & 0-10 VDC, • Input signal type • Master-slave ratio control 4-20 mA (250 ohm max load resistance) • Alarm high and low values • Independent totalizers and alarms • 2 alarms per channel • Master-slave ratio control • Digital output: RS-232, RS-485 • Calibrate full scale • Calibrate zero • Gas correction factor

FloBox TM

GAS FLOW CALIBRATORS • Proven dimensionally-based primary Flow Ranges CalTrak standard accuracy backed by a • 500 Premium rigorous uncertainty analysis 5 sccm to 50 slpm (Across three Models • Manufactured to ISO 17025 flow cells) • 500, 800 Premium Standards at a NVLAP accredited lab • 800 Premium • XL High Flow Fluids Measured 0.5 sccm to 100 slpm (Across five flow cells) Description • All clean gases; toxic and corrosive • XL High Flow • Quick, easy to use, automatic data gas versions available capture using free software 5 slpm to 1500 slpm • Portable and battery operated Accuracy • Results directly traceable to NIST • Highest accuracy of ± 0.15% of • Highest accuracy primary standard reading gas mass flow rate for labs & industry (compare at ± Note: At gas pressure of 760 mmHg, 0.15% of reading) (1 atm) and a gas temperature of

CalTrak® • Innovative – 100:1 turndown ratio 25°C (77°F) with standardization 2

temperature set to 21.1 °C (69.98°F) 2

.

0

1

_

4 V GLOBAL LOCATIONS

United Kingdom The Netherlands Michigan

California •• South Korea • China Mexico • India • • • •Singapore Brazil • •

California / USA Michigan / USA United Kingdom The Netherlands India China

Find other Sierra Flow Centers of Excellence in Mexico, Brazil, Singapore, and South Korea.

5 Harris Court, Building L / Monterey, CA 93940 / USA Phone: 800.866.0200 / 831.373.0200 / fax 831.373.4402 email: [email protected]

sierrainstruments.com