DOCSLIB.ORG

Navigator Gaff Yawl Suggested Rigging List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Navigator Gaff Yawl Suggested Rigging List Navigator Gaff Yawl suggested rigging list This is a spreadsheet that I used to compile what hardware to order from Duckworks. It should help you get started, but please note that it comes with several disclaimers. Everyone rigs their boats differently. Yours won’t be exactly the same as mine. Don’t just order everything on this list!!! I built the gaff rig sailplan. If you’re building the lug or sloop, obviously there will be differences. Duckworks has expanded their selection of hardware since this spreadsheet was made. Look around their site. You may find hardware you like better than what I used. I especially like the new Mantus anchors. I think if you review my blog post at http://navigatorjoel.blogspot.com/ - and shop ducksworks, you will be fine. - Joel Bergen Category Item Catalog No. Qty Comments Anchor, mooring Bow chocks SD-060040 1 pair Cleat SD-043065 4 mooring cleats 4 at 6.5" Anchor 1 Anchor, chain, rode, shackles Bobstay Shroud adjustor RL-245S 1 Attach bobstay to bowsprit Sleeves 1/8 SIT-1018 4 Thimble 1/8 SD-170003 2 Shackle RL-312-0 1 Attach bobstay to tow eye SS Cable see shrouds Oblong Eye Plate SD-088721 1 Underside of bowsprit Jib furler, halyard, sheets Oblong Eye Plate SD-0088721 1 On top of bowsprit Shackle RL-312-0 3 Both sides of furler & halyard Block RL-221 1 jib halyard block Cleat SD-043040 1 jib halyard cleat Hound RL-425-H 1 Mast hound for jib halyard Fairlead SD-082010 2 For furler, on bowsprit & deck Through Deck RL-49-P 1 for furler line fairlead Deck block RL-2040 1 turning block at seat Cleat SD-043030 1 Roller furler line Cam cleat RL-260-S 2 Jib Sheet Fairlead SD-082615 4 Jib sheet. ss lined Mast gooseneck, shrouds, gaff, halyards Gooseneck RL-328-C 1 pin 3/8 SS Cable 40 verify length. price per foot Shroud adjustor RL-245L 2 Shroud to deck. Need thimble Thimble 1/8 SD-170003 4 ends of shrouds Swaging tool SIT-2001 1 Sleeves 1/8 SIT-1018 12 ends of shrouds & bobstay Tang RL-320 2 attach upper shroud to mast Shackle RL-312-0 2 upr shroud to tang Saddle SD-081205 2 gaff Parrell beads WIL-1050 6 5/8" Boom hanger RL-417 1 for gaff Cheek block RL-308-B 1 on mast, for throat halyard for peak halyard on boom Blocks RL-221 1 hanger for throat and peak halyards Deck blocks RL-2040 2 on front seat Through deck RL-49-P 2 for throat and peak halyards failead Cam cleats RL-261-S 2 for throat and peak halyards pad eye SD-081200 2 gaff cable bridle Boom, mainsheet, reefing, vang Fiddle block RL-306-DF 1 Fiddle deck for mainsheet Swivel camcleat RF58 1 mainsheet Becket block RL-304-A 1 mainsheet boom Boom bail RL-334-S 1 mainsheet boom Boom bail RL-334-L 1 for vang Saddle SD-081205 1 aft end of boom Block/cleat RL-D100 1 boom vang single block RL-304-A 1 boom vang double fiddle RL-378-A 1 boom vang Oblong Eye Plate SD-088721 1 boom vang cleat SD-043030 2 reefing Pad eye SD-081200 2 reefing SS RING SD-191207 2 Centerboard, lifting, pivot Double cheek RL-708-AD 1 cb lift Single becket R-702-A 1 cb lift tang RL-320 3" 2 cb Cleat SD-043030 1 Mizzen, halyard, downhaul, boom, sheet Spin strap RL-318 2 halyard and topping lift Block RL-205 2 halyard and topping lift Cleat SD-043030 3 halyard topping lift downhaul pad eye SD-081200 5 downhaul snotter sheet parrell beads 6 cam cleat RL-260-S 1 mizzen sheet Boomkin pad eye SD-081200 1 sheet SS RING SD-191410 1 sheet Rudder, uphaul, downhaul, tiller lock Autorelease cleat SD-002570 1 rudder downhaul cleat SD-043030 1 rudder uphaul turning block RL-340 2 rudder up and downhauls.
Load more

Recommended publications
  • Appropriate Sailing Rigs for Artisanal Fishing Craft in Developing Nations
    SPC/Fisheries 16/Background Paper 1 2 July 1984 ORIGINAL : ENGLISH SOUTH PACIFIC COMMISSION SIXTEENTH REGIONAL TECHNICAL MEETING ON FISHERIES (Noumea, New Caledonia, 13-17 August 1984) APPROPRIATE SAILING RIGS FOR ARTISANAL FISHING CRAFT IN DEVELOPING NATIONS by A.J. Akester Director MacAlister Elliott and Partners, Ltd., U.K. and J.F. Fyson Fishery Industry Officer (Vessels) Food and Agriculture Organization of the United Nations Rome, Italy LIBRARY SOUTH PACIFIC COMMISSION SPC/Fisheries 16/Background Paper 1 Page 1 APPROPRIATE SAILING RIGS FOR ARTISANAL FISHING CRAFT IN DEVELOPING NATIONS A.J. Akester Director MacAlister Elliott and Partners, Ltd., U.K. and J.F. Fyson Fishery Industry Officer (Vessels) Food and Agriculture Organization of the United Nations Rome, Italy SYNOPSIS The plight of many subsistence and artisanal fisheries, caused by fuel costs and mechanisation problems, is described. The authors, through experience of practical sail development projects at beach level in developing nations, outline what can be achieved by the introduction of locally produced sailing rigs and discuss the choice and merits of some rig configurations. CONTENTS 1. INTRODUCTION 2. RISING FUEL COSTS AND THEIR EFFECT ON SMALL MECHANISED FISHING CRAFT IN DEVELOPING COUNTRIES 3. SOME SOLUTIONS TO THE PROBLEM 3.1 Improved engines and propelling devices 3.2 Rationalisation of Power Requirements According to Fishing Method 3.3 The Use of Sail 4. SAILING RIGS FOR SMALL FISHING CRAFT 4.1 Requirements of a Sailing Rig 4.2 Project Experience 5. DESCRIPTIONS OF RIGS USED IN DEVELOPMENT PROJECTS 5.1 Gaff Rig 5.2 Sprit Rig 5.3 Lug Sails 5.3.1 Chinese type, fully battened lug sail 5.3.2 Dipping lug 5.3.3 Standing lug 5.4 Gunter Rig 5.5 Lateen Rig 6.
    [Show full text]
  • Boom Vang Rigging
    Congratulations! You purchased the best known and best built pocket cruising vessels available. We invite you to spend a few moments with the following pages to become better acquainted with your new West Wight Potter. If at any point we can assist you, please call 800 433 4080 Fair Winds International Marine Standing Rigging The mast is a 2” aluminum extrusion with a slot on the aft side to which the sail’s boltrope or mainsail slides (options item) enter when hoisting the main sail. Attached to the mast will be two side stays, called Shrouds, and a Forestay. These three stainless cables represent the standing rigging of the West Wight Potter 15. The attachment points for the shroud adjusters are on the side of the deck. Looking at the boat you will find ¼” U-Bolts mounted through the deck on either side of the boat and the adjuster goes over these U-Bolts. Once the shroud adjuster slides in, the clevis pin inserts through the adjuster and is held in place with a lock ring. When both side stays are in place we move onto the mast raising. Mast Raising First, remove the mast pin holding the mast base in the bow pulpit. Second, move the mast back towards the mast step on the cabin top of the boat and pin the mast base into the aft section of the mast step (the mast step is bolted onto the cabin top of the boat). The mast crutch on the transom of the boat will support the aft end of the mast.
    [Show full text]
  • Website Address
    website address: http://canusail.org/ S SU E 4 8 AMERICAN CaNOE ASSOCIATION MARCH 2016 NATIONAL SaILING COMMITTEE 2. CALENDAR 9. RACE RESULTS 4. FOR SALE 13. ANNOUNCEMENTS 5. HOKULE: AROUND THE WORLD IN A SAIL 14. ACA NSC COMMITTEE CANOE 6. TEN DAYS IN THE LIFE OF A SAILOR JOHN DEPA 16. SUGAR ISLAND CANOE SAILING 2016 SCHEDULE CRUISING CLASS aTLANTIC DIVISION ACA Camp, Lake Sebago, Sloatsburg, NY June 26, Sunday, “Free sail” 10 am-4 pm Sailing Canoes will be rigged and available for interested sailors (or want-to-be sailors) to take out on the water. Give it a try – you’ll enjoy it! (Sponsored by Sheepshead Canoe Club) Lady Bug Trophy –Divisional Cruising Class Championships Saturday, July 9 10 am and 2 pm * (See note Below) Sunday, July 10 11 am ADK Trophy - Cruising Class - Two sailors to a boat Saturday, July 16 10 am and 2 pm * (See note Below) Sunday, July 17 11 am “Free sail” /Workshop Saturday July 23 10am-4pm Sailing Canoes will be rigged and available for interested sailors (or want-to-be sailors) to take out on the water. Learn the techniques of cruising class sailing, using a paddle instead of a rudder. Give it a try – you’ll enjoy it! (Sponsored by Sheepshead Canoe Club) . Sebago series race #1 - Cruising Class (Sponsored by Sheepshead Canoe Club and Empire Canoe Club) July 30, Saturday, 10 a.m. Sebago series race #2 - Cruising Class (Sponsored by Sheepshead Canoe Club and Empire Canoe Club) Aug. 6 Saturday, 10 a.m. Sebago series race #3 - Cruising Class (Sponsored by Sheepshead Canoe Club and Empire Canoe Club) Aug.
    [Show full text]
  • Chapter 7 Rigging the Sail
    1 Chapter 7 (..of The Cambered Panel Junk Rig...) Rigging the sail. (..all those ropes!) Malena, 1.4t, 32sqm Johanna, 3.2t, 48sqm Broremann 0.20t, 10sqm Frk. Sørensen, 0.74t, 20m2 Ingeborg, 2.15t, 35sqm In this chapter, I will mainly tell how I have rigged my own sails, but may also show alternative ways of doing it. Actually, I think it is a good idea to read this chapter before one settles on a rig type. No doubt, this text will have to be updated several times, as I receive more feedback. I will frequently use links to other write-ups I have produced, to describe details. Since all of these sit on the same website, they will stay operational for as long as this chapter does. If you are a serious doer, I guess it makes sense to download these texts and store them. One never knows when a website might fold... Aluminium mast cap (5mm thick) Webbing type mast cap for 10sqm sail on Broremann. Preparing the mast for first stepping. With the mast in hand, one needs some way of attaching the halyard etc. to the mast top. My preferred way has been to make some sort of mast cap of steel or (better) aluminium. For smaller rigs, I have just made it out of webbing and fixed it to the mast with a couple of hose clamps. In the latter case, one should add a fez-type cap to it, to protect the webbing from the sun. All my mast tops have been of wood.
    [Show full text]
  • ANSWERS to Goddard Sailing Association
    ANSWERS to Goddard Sailing Association (Chesapeake Bay) online-test QUESTION 1: Identify the following parts of a sailboat below: centerboard forestay port shroud tabernacle toping lift boom vang painter winch starboard boom mast tiller A. Boom B. Forestay C. Shroud D. Mast E. Winch F. Centerboard G. Tabernacle H. Tiller I. Topping lift J. Painter K. Port L. Starboard M. Boom vang QUESTION 2: Identify the following sails and parts of a sail below: luff leach clew bow batten head tack foot mainsail stern telltale jib A. mainsail B. jib C. clew D. tack E. head F. leach G. luff H. foot I. batten J. telltale K. stern L. bow QUESTION 3: Match the following items found on a sailboat with one of the functions listed below. mainsheet jibsheet(s) halyard(s) fairlead rudder winch cleat tiller A. Used to raise (hoist) the sails HALYARD B. Fitting used to tie off a line CLEAT C. Furthest forward on-deck fitting through which the jib sheet passes FAIRLEAD D. Controls the trim of the mainsail MAINSHEET E. Controls the angle of the rudder TILLER F. A device that provides mechanical advantage WINCH G. Controls the trim of the jib JIBSHEET H. The fin at the stern of the boat used for steering RUDDER QUESTION 4: Match the following items found on a sailboat with one of the functions listed below. stays shrouds telltales painter sheets boomvang boom topping lift outhaul downhaul/cunningham A. Lines for adjusting sail positions SHEETS B. Used to adjust the tension in the luff of the mainsail DOWNHAUL/CUNNINGHAM C.
    [Show full text]
  • Sailing Course Materials Overview
    SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home.
    [Show full text]
  • Historic American Engineering Record R-Boat
    HISTORIC AMERICAN ENGINEERING RECORD R-BOAT PIRATE HAER No. WA-187 Location: The Center for Wooden Boats, Seattle, King County, Washington 3 Rig/Type of Craft: Marconi /4 Rig Racing Sloop Trade: Racing/ Recreation Official Number: R-11 Principal Dimensions: Length: 40'-3" (oa) Beam: 8'-6" Draft: 5'-5" Displacement: 10,900 lbs (The listed dimensions are current, but it should be noted that draft, displacement, and tonnages were subject to alterations to trim as well as variations in measurement.) Propulsion: Sail Date of Construction: 1926 Original Owners: Don and Tommy Lee Present Owner: The Center for Wooden Boats Disposition: Museum exhibit Significance: R-boat Pirate, fully restored from 1999 to 2005, is the best extant example of the R-class. Pirate also embodies the most advanced skills and talents in both yacht design and construction in the Seattle area in the early twentieth century. The sloop won the National Championship in its class in 1929 and has the reputation of being one of the fastest R-boats ever built. Project Information: From the summer through the winter of 2009, The Center for Wooden Boats (CWB) documented the 16’ Salish Canoe (see HAER No. WA-188) and R-Boat Pirate, which was made possible by a grant from 4Culture. The documentation produced will be used to create a new interpretation R-BOAT PIRATE HAER No. WA-187 Page 2 exhibit onsite at CWB and emphasize the center’s mission to interpret Northwest small craft history. In addition, this project fits into CWB’s broader vision of becoming a regional documentation center affiliated with the National Park Service.
    [Show full text]
  • Sunfish Sailboat Rigging Instructions
    Sunfish Sailboat Rigging Instructions Serb and equitable Bryn always vamp pragmatically and cop his archlute. Ripened Owen shuttling disorderly. Phil is enormously pubic after barbaric Dale hocks his cordwains rapturously. 2014 Sunfish Retail Price List Sunfish Sail 33500 Bag of 30 Sail Clips 2000 Halyard 4100 Daggerboard 24000. The tomb of Hull Speed How to card the Sailing Speed Limit. 3 Parts kit which includes Sail rings 2 Buruti hooks Baiky Shook Knots Mainshoat. SUNFISH & SAILING. Small traveller block and exerts less damage to be able to set pump jack poles is too big block near land or. A jibe can be dangerous in a fore-and-aft rigged boat then the sails are always completely filled by wind pool the maneuver. As nouns the difference between downhaul and cunningham is that downhaul is nautical any rope used to haul down to sail or spar while cunningham is nautical a downhaul located at horse tack with a sail used for tightening the luff. Aca saIl American Canoe Association. Post replys if not be rigged first to create a couple of these instructions before making the hole on the boom; illegal equipment or. They make mainsail handling safer by allowing you relief raise his lower a sail with. Rigging Manual Dinghy Sailing at sailboatscouk. Get rigged sunfish rigging instructions, rigs generally do not covered under very high wind conditions require a suggested to optimize sail tie off white cleat that. Sunfish Sailboat Rigging Diagram elevation hull and rigging. The sailboat rigspecs here are attached. 650 views Quick instructions for raising your Sunfish sail and female the.
    [Show full text]
  • Build the USS CONSTITUTION the World’S Oldest Commissioned Naval Vessel Afloat 12 Build the USS CONSTITUTION Contents STAGE PAGE 111 Sails 245
    Build the USS CONSTITUTION The world’s oldest commissioned naval vessel afloat 12 Build the USS CONSTITUTION Contents STAGE PAGE 111 Sails 245 112 Sails and flags 247 113 Sails 249 114 Sails 251 115 Sails 253 116 Sails 255 117 Sails 257 118 Sails 259 119 Sails 261 120 Sails 263 Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown. USS CONSTITUTION STAGE: 111 C 79 Sails 75 68 V3. Fore topmast staysail V4. Main topmast staysail 57 V4 V3 111C Following the plan, attach the four yards (57, 68, 75 and 79) to the front of the foremast. 111D Now prepare the three sections of the mainmast, following the plan. The mainmast (81) with fittings and top, the main topmast (106) and the main topgallant mast (112) following the same process as with the foremast. 111A Retrieve the spritsail A D yard (20) and secure it to the 81 bowsprit with the parrel (23). Tie the parrel to the yard, then pass it over the bowsprit and secure the free end to the yard. 20 112 106 B E 64 111B Retrieve the foremast yards (57, 68, 75 and 79) prepared in Stage 110 and paint them with wood stain.
    [Show full text]
  • J/22 Sailing MANUAL
    J/22 Sailing MANUAL UCI SAILING PROGRAM Written by: Joyce Ibbetson Robert Koll Mary Thornton David Camerini Illustrations by: Sally Valarine and Knowlton Shore Copyright 2013 All Rights Reserved UCI J/22 Sailing Manual 2 Table of Contents 1. Introduction to the J/22 ......................................................... 3 How to use this manual ..................................................................... Background Information .................................................................... Getting to Know Your Boat ................................................................ Preparation and Rigging ..................................................................... 2. Sailing Well .......................................................................... 17 Points of Sail ....................................................................................... Skipper Responsibility ........................................................................ Basics of Sail Trim ............................................................................... Sailing Maneuvers .............................................................................. Sail Shape ........................................................................................... Understanding the Wind.................................................................... Weather and Lee Helm ...................................................................... Heavy Weather Sailing ......................................................................
    [Show full text]
  • CATBOAT GUIDE and SAILING MANUAL Collected from Web Sites, Articles, Manuals, and Forum Postings
    CATBOAT GUIDE and SAILING MANUAL Collected from Web sites, articles, manuals, and forum postings Compiled and edited by: Edward Steinfeld [email protected] What I dream about. What fits my need best. ii Picnic cat by Com-Pac What I can trailer. Fisher Cat by Howard Boats iii Contents CATBOAT THESIS ...................................................................................................................1 MOORING AND DOCKING ...................................................................................................3 Docking ....................................................................................................................................................................................... 3 Docking and Mooring ............................................................................................................................................................. 4 Docking Lessons ...................................................................................................................................................................... 5 MENGER CAT 19 OWNER'S MANUAL ...............................................................................8 Stepping and Lowering the Tabernacle Mast ............................................................................................................... 8 Trailer Procedure ..................................................................................................................................................................... 9 Sailing
    [Show full text]
  • Rigging Guide Viola 14 Square Head Rigs
    Rigging Guide Viola 14 Square Head rigs Rigging the Viola 14 Square Head rig is a very simple affair. As you see in the picture below, just 2 mast sec#ons 1 fully rigged boom the sail (which has the full length ba&ens permanently in place and is rolled due to the type of fabric used ' Mylar) and a small bag containing the various sail controls. Preparing the mast Start by wrapping tape around both bearings on the mast top sec#on un#l you will have a #ght *t when two top and bo&om sec#on are slo&ed together. Ne,t slide the top mast sec#on in the bo&om mast sec#on. -rap some electrical tape around the joint to ma.e the mast water#ght and to avoid the joint being able to pinch the fabric of the luff mast sleeve Tip: To make the top secon water ght, you can either use commercially available plasc caps or inserts, if you can find them in the right size, or simply make some yourself using plywood offcuts. ince you are wrapping electrical tape around the joint, you could omit having a plug in the bo"om of the top mast secon. I do like to build in some addional security however and have fi"ed them on both ends. If making the plugs yourself, cut two rounds the size of the inner diameter of the tube and two other rounds slight oversized in comparison to the outer diameters of the top of the top mast secon/bearing at the bo"om end of the top mast secon.
    [Show full text]