Navigator Gaff Yawl suggested rigging list This is a spreadsheet that I used to compile what hardware to order from Duckworks. It should help you get started, but please note that it comes with several disclaimers. Everyone rigs their boats differently. Yours won’t be exactly the same as mine. Don’t just order everything on this list!!! I built the gaff rig sailplan. If you’re building the lug or sloop, obviously there will be differences. Duckworks has expanded their selection of hardware since this spreadsheet was made. Look around their site. You may find hardware you like better than what I used. I especially like the new Mantus anchors. I think if you review my blog post at http://navigatorjoel.blogspot.com/ - and shop ducksworks, you will be fine. - Joel Bergen Category Item Catalog No. Qty Comments Anchor, mooring Bow chocks SD-060040 1 pair Cleat SD-043065 4 mooring cleats 4 at 6.5" Anchor 1 Anchor, chain, rode, shackles Bobstay Shroud adjustor RL-245S 1 Attach bobstay to bowsprit Sleeves 1/8 SIT-1018 4 Thimble 1/8 SD-170003 2 Shackle RL-312-0 1 Attach bobstay to tow eye SS Cable see shrouds Oblong Eye Plate SD-088721 1 Underside of bowsprit Jib furler, halyard, sheets Oblong Eye Plate SD-0088721 1 On top of bowsprit Shackle RL-312-0 3 Both sides of furler & halyard Block RL-221 1 jib halyard block Cleat SD-043040 1 jib halyard cleat Hound RL-425-H 1 Mast hound for jib halyard Fairlead SD-082010 2 For furler, on bowsprit & deck Through Deck RL-49-P 1 for furler line fairlead Deck block RL-2040 1 turning block at seat Cleat SD-043030 1 Roller furler line Cam cleat RL-260-S 2 Jib Sheet Fairlead SD-082615 4 Jib sheet. ss lined Mast gooseneck, shrouds, gaff, halyards Gooseneck RL-328-C 1 pin 3/8 SS Cable 40 verify length. price per foot Shroud adjustor RL-245L 2 Shroud to deck. Need thimble Thimble 1/8 SD-170003 4 ends of shrouds Swaging tool SIT-2001 1 Sleeves 1/8 SIT-1018 12 ends of shrouds & bobstay Tang RL-320 2 attach upper shroud to mast Shackle RL-312-0 2 upr shroud to tang Saddle SD-081205 2 gaff Parrell beads WIL-1050 6 5/8" Boom hanger RL-417 1 for gaff Cheek block RL-308-B 1 on mast, for throat halyard for peak halyard on boom Blocks RL-221 1 hanger for throat and peak halyards Deck blocks RL-2040 2 on front seat Through deck RL-49-P 2 for throat and peak halyards failead Cam cleats RL-261-S 2 for throat and peak halyards pad eye SD-081200 2 gaff cable bridle Boom, mainsheet, reefing, vang Fiddle block RL-306-DF 1 Fiddle deck for mainsheet Swivel camcleat RF58 1 mainsheet Becket block RL-304-A 1 mainsheet boom Boom bail RL-334-S 1 mainsheet boom Boom bail RL-334-L 1 for vang Saddle SD-081205 1 aft end of boom Block/cleat RL-D100 1 boom vang single block RL-304-A 1 boom vang double fiddle RL-378-A 1 boom vang Oblong Eye Plate SD-088721 1 boom vang cleat SD-043030 2 reefing Pad eye SD-081200 2 reefing SS RING SD-191207 2 Centerboard, lifting, pivot Double cheek RL-708-AD 1 cb lift Single becket R-702-A 1 cb lift tang RL-320 3" 2 cb Cleat SD-043030 1 Mizzen, halyard, downhaul, boom, sheet Spin strap RL-318 2 halyard and topping lift Block RL-205 2 halyard and topping lift Cleat SD-043030 3 halyard topping lift downhaul pad eye SD-081200 5 downhaul snotter sheet parrell beads 6 cam cleat RL-260-S 1 mizzen sheet Boomkin pad eye SD-081200 1 sheet SS RING SD-191410 1 sheet Rudder, uphaul, downhaul, tiller lock Autorelease cleat SD-002570 1 rudder downhaul cleat SD-043030 1 rudder uphaul turning block RL-340 2 rudder up and downhauls.