Air Defense Systems Integrator ADSI® Certified Joint Tactical Data Link Forwarding and Control

Total Page:16

File Type:pdf, Size:1020Kb

Air Defense Systems Integrator ADSI® Certified Joint Tactical Data Link Forwarding and Control Air Defense Systems Integrator ADSI® Certified joint tactical data link forwarding and control Benefits Overview ® • Combat-proven command and control The Air Defense Systems Integrator (ADSI ), is the most interoperable, real- time, tactical command and control system offered anywhere. With more than • Real time situational awareness 2,000 ADSI products installed worldwide, the combat-proven ADSI remains • Multiple communications and radar unmatched in its ability to provide joint-certified tactical data link forwarding interfaces (JTIDS, SADL, satellite, software combined with an unparalleled number of tactical data link, radar and *EPLRS) electronic intelligence interfaces. • Multiple data links, including Link 16 and Link 11 For the last 30+ years the U.S. military has relied on the ADSI during every • Extensive message filtering major crisis. Today, it is used on aircraft carriers and command ships, in tactical and air operations centers, in airspace integration systems and in • Supports multiple remote workstations joint command centers around the world. The ADSI supports critical missions • COTS hardware provides affordable by integrating land, air and sea domains, providing command and control decrease in Size, Weight and Power of tactical units and reporting real-time sensor information across the (SWaP) battlespace. • Expert support, available 24 hours • World class training and reference media Scalable architecture and hardware (available in 2U, 3U and 4U) The system can be easily tailored to your mission requirements, whether there are only a few tracks in the system or a few thousand. Multiple radar formats Simultaneous interconnectivity and capabilities • Joint Tactical Information Distribution System ( JTIDS) Class 2 and 2M (shipboard, • Common Digitizer-2 (CD-2) (US) airborne and land-based) • NATS (UK) • Multifunctional Information Distribution System (MIDS) Low Volume Terminal (LVT) 1, 2, 3, 4, 6, 7 and MOS Mod • SDO-1000 (NATO) • MIDS JTRS • ASTERIX • USQ-125, MX-512P, USQ-130 • ADS-B • Joint Range Extension Application Protocol ( JREAP) MIL-STD-3011 Appendices A, B • Accepts a wide variety of radar inputs and C (military and commercial) • Satellite TADIL J (S-TADIL J) (WSC-3, PSC-5D, LST-5D, PRC-117F, ARC-210) • Initiates tracks automatically • Legacy Ethernet (Multi-TADIL Display System [MTDS], Multi-TADIL Capability [MTC]) • Combines tracks from a large number of radar ports into a Single Integrated • Legacy Serial Link 16 Picture (SIP) • Standard Interface for Multiple Platform Link Evaluation (SIMPLE) 16 • Correlates radar tracks with tracks from tactical data links • SIMPLE 11 • Reports tracks on tactical data links • Interoperable Data Link (IDL) • Registers multiple radars automatically • Army Tactical Data Link (ATDL)-1 MIL-STD-6013 • NATO Link 1 • Forward Area Air Defense (FAAD) data link • Cursor on Target (CoT) • Situation Awareness Data Link (SADL) • Global Positioning System (GPS) (NMEA-0183, DAGR, PLGR) • Navigation data sources (PC-NAV) • Area Air Defense Commander (AADC) ADSI Key Features The latest version of ADSI system significantly increases the warfighter’s • MIDS JTRS Support interoperability with 32 simultaneous and dynamically reconfigurable data • MIDS BU2 Support links—tested and reliable—with an increased track capacity of 16,000 tracks. • MIL-STD 3011 Upgrade provides Most importantly, the completely revamped user interface greatly improves the the ability through a management entire ADSI user experience, from system configuration to system operation. message for systems to exchange filter settings and for a JICO to set filters on Now, the system can be reconfigured without downtime. remote systems. • The Virtual ADSI leverages virtual The configuration wizards safeguard the system from inadvertent operator hardware platform technology and error. Persistent system and interface status are shown graphically. With its interfaces with appliances to provide NTDS, 1553, and serial connectivity strict adherence to all relevant military standards, including the latest MIL- when necessary. STD-6016, the ADSI system ensures reliable interoperability. Most importantly, the completely revamped user interface greatly improves the entire ADSI user experience, from system configuration to system operation. New Features • RMF Enhancements • MIL-STD 3011 Revision B updates • MIL-STD 3011 Filters • Upgraded TacViewC2™ graphics engine, enhanced performance and usability • TacViewC2™ – 3D situational awareness and C2 display • Certified digital air control • Certified Variable Message Format (VMF) interface • Robust IA functionality A Windows-based system manager provides a multi-featured, user-friendly configuration and monitoring application. Virtual ADSI The certified, combat-proven advanced tactical data link capabilities of the ADSI software is now available on a Virtual Machine (VM), providing serial and Ethernet Link 16 and Link 11 communications in a secure networked environment. The ADSI virtual software is hosted on a VMware® ESXi server with the vSphere hypervisor client software installed locally. Two VMs host the ADSI virtual software; a Microsoft® Windows® 10 Enterprise VM and a Red Hat® Enterprise® Linux VM. Ultra’s robust TacViewC2™ software is the C2 and situational awareness display on the Windows VM. Virtual ADSI continued Ethernet Data Link Core Offering Virtual ADSI is offered in three configurations. The core • Link 16 JREAP 3011C virtual offering provides Link 16 Ethernet links as well • Link 16 MTC as Ethernet Intel and secondary links. The Link16 serial • Link 16 MTDS option provides Link 16 serial links through the SyncNet8 • Link 16 SIMPLE serial-to-IP conversion appliance. The virtual ADSI • Link 11 SIMPLE software supports up to eight serial data link connections • MIDS on IP (LVT-1D, LVT-2J, LVT-11, STT or TTR) to the SyncNet8 appliance via a single Ethernet • Intel data links including: FDL, OTH-T, CMF and USMTF connection. • Secondary data links including VMF • MTCD The Link 11 option uses the PowerNet appliance and provides Link 11 connectivity via the IXI Technologies Serial Data Link Offering with Ultra’s SyncNet8 PowerNet ATDS or NTDS Bridge system. Appliance All of the ADSI functionality is available in the virtualized The SyncNet8 appliance is Ultra’s interface conversion version, including Dynamic Link Reconfiguration, the device that transports serial communications over an drag-and-drop Configuration Wizard and Windows-based Ethernet Local Area Network (LAN). The network device System Manager. converts a full duplex synchronous, asynchronous or With strict adherence to all relevant military standards, HDLC serial data stream to a UDP/ IP packet stream. including the latest MIL-STD-6016, the ADSI virtual • JREAP A software ensures reliable interoperability. • JREAP B (synchronous and asynchronous) The ADSI Virtual Machine (VM) is hosted on a VMWare • S-TADIL J ESXI server with the VSphere Hypervisor client software • MTC installed locally. Other VM configurations may be • MTDS Serial J supported upon request. • Link 16 SIMPLE • Link 11 SIMPLE ESXI Hardware Requirements • Link 11 Indianhead • Link 11B • Host machine with at least two core processors • NATO Link-1 • Server with 64-bit x86 CPUs • Supports only LAHF and SAHF CPU instructions • Requires the NX/XD bit to be enabled for the CPU in BIOS • 8 GB RAM per VM • One or more 1 GigE or 10 GigE Ethernet controllers Learn more about Ultra’s Command and Control Systems at [email protected] or ultra.group/intelligence-communications Ultra reserves the right to vary these specifications without notice. © 2021 Ultra Electronics Ltd. All rights reserved. 1003.1-I&C-en-REV0321.
Recommended publications
  • Curtiss-Wright Intelligent Tactical Data Link Translation Gateway Improves and Simplifies Real-Time Warfighter Communications
    NEWS RELEASE FOR IMMEDIATE RELEASE Contact: John Wranovics M: 925.640.6402 [email protected] Curtiss-Wright Intelligent Tactical Data Link Translation Gateway Improves and Simplifies Real-time Warfighter Communications New HUNTR™ software application lets JTACs and TACPs easily create a Multi-Tactical Datalink Network that supports Link 16, VMF, Cursor-On-Target (CoT), JREAP, SADL, and CESMO data exchanges between ground forces, aircraft, ships, and C2 elements ASHBURN, Va. – September 9, 2019 – Curtiss-Wright’s Defense Solutions division, a trusted leading supplier of Tactical Data Link (TDL) software and hardware solutions, announced today that its Tactical Communications Group (TCG) business has introduced HUNTR (TDL Hub and Network Translator), a new intelligent TDL translation gateway for Link 16, Variable Message Format (VMF), Cursor-On-Target (CoT), Joint Range Extension Applications Protocol (JREAP), Situational Awareness Data Link (SADL), and Cooperative ESM Operations (CESMO). Today, moving data between similar and dissimilar data links is a daunting task that can prove an obstacle to mission success. HUNTR is a breakthrough software application that significantly improves and simplifies the real-time translation and routing of TDLs. It provides warfighters and command and control centers with real-time access to accurate operational data in the field. HUNTR supports the automatic routing, forwarding, and translation of J-Series, K-Series, CoT, and CESMO messages and automates processing and translation of multiple, simultaneous Digitally- Aided Close Air Support (DACAS) missions between ground JTAC kits equipped with VMF or CoT radios and air/land/sea Link 16 assets. Designed to run on any Microsoft Windows 10 supported platform, HUNTR delivers instant integration and interoperability for multiple heterogeneous TDLs.
    [Show full text]
  • WHY the RCAF SHOULD FOCUS on INTEROPERABILITY THROUGH DATALINK Ltcol Seongju Kim
    WHY THE RCAF SHOULD FOCUS ON INTEROPERABILITY THROUGH DATALINK LtCol Seongju Kim JCSP 44 PCEMI 44 SERVICE PAPER ÉTUDE MILITAIRE Disclaimer Avertissement Opinions expressed remain those of the author and Les opinons exprimées n’engagent que leurs auteurs do not represent Department of National Defence or et ne reflètent aucunement des politiques du Canadian Forces policy. This paper may not be used Ministère de la Défense nationale ou des Forces without written permission. canadiennes. Ce papier ne peut être reproduit sans autorisation écrite. © Her Majesty the Queen in Right of Canada, as © Sa Majesté la Reine du Chef du Canada, représentée par represented by the Minister of National Defence, 2018. le ministre de la Défense nationale, 2018. CANADIAN FORCES COLLEGE – COLLÈGE DES FORCES CANADIENNES JCSP 44 – PCEMI 44 2017 – 2018 SERVICE PAPER - ÉTUDE MILITAIRE Why the RCAF Should Focus on Interoperability through Datalink LtCol Seongju Kim “This paper was written by a student “La présente étude a été rédigée par un attending the Canadian Forces College stagiaire du Collège des Forces in fulfilment of one of the requirements canadiennes pour satisfaire à l'une des of the Course of Studies. The paper is a exigences du cours. L'étude est un scholastic document, and thus contains document qui se rapporte au cours et facts and opinions, which the author contient donc des faits et des opinions alone considered appropriate and que seul l'auteur considère appropriés et correct for the subject. It does not convenables au sujet. Elle ne reflète pas necessarily reflect the policy or the nécessairement la politique ou l'opinion opinion of any agency, including the d'un organisme quelconque, y compris le Government of Canada and the gouvernement du Canada et le ministère Canadian Department of National de la Défense nationale du Canada.
    [Show full text]
  • Mission Specific Data Links
    IDLS 2017 – Abu Dhabi (UAE) 1 1 Nov 2017 German Air Force Headquarters Mission Specific Data Links Branch Chief TDL/ID/SIM LtCol Volker „Chaff“ Schaaf UNCLASSIFIED - FOUO Overview 2 1 Nov 2017 DEU UNIT VMF (LOS) IP TAC SAT K02.35 „Aircraft Depart Initial Point“ CP Request for TARGET Fire Support VMF (LOS) VMF K 02.33 „CAS Aircrew (BLOS) JOINT FIRE SUPPORT TEAM + Briefing“ K 2.27 „CAS VMF (LOS) Request“ K 02.34 „Aircraft On- VMF JTAC Station Report“ (BLOS) K 2.32 „CAS Request Acceptance“ 4. J 12.0 MIDS/Link16 „Mission Assignment“ J 3.7 J 14.0 CESMO TUNE J 12.0 (J3.5) J 3.7 MESSAGE J 14.0 CESMO (J3.5) TIP ASOC (AOCC) MESSAGE / VMF/Link 16 Gateway TUNE REPLY CESMO (ASOC Gateway) Orbit (CAP) MESSAGE CESMO CESMO J 3.7 TIP MESSAGE / TUNE J 14.0 J-REAP MESSAGE (J3.5) CRC J 14.2 „EW Control Coordination“ TUNE REPLY SIA MESSAGE DCAOC SEWOC J-REAP J 3.7 „EW Product Information“ CESMO/Link 16 Gateway J 14.0 „EW Parametric Info“ (J 3.5 „Land (Ground) Point/Track“) UNCLASSIFIED - FOUO Does it work already? 3 1 Nov 2017 Operational benefits by “combining” mission specific data links. UNCLASSIFIED - FOUO Agenda 4 1 Nov 2017 Link 16 DaCAS - VMF & IDM CESMO Airborne Prototype „Data Links“ Ex TIMBER EXPRESS Challenges UNCLASSIFIED - FOUO Link 16 - Definition 5 1 Nov 2017 • Tactical Data Link • TDMA-based • Secure and jam resistant • Line-of-sight • BLOS via JREAP or SIMPLE • J-series messages TDMA: Time Division Multiple Access BLOS: Beyond Line-Of-Sight JREAP: Joint Range Extension Application Protocol SIMPLE: Standard Interface for Multiple-Link Evaluation
    [Show full text]
  • Inter-Island Communications
    SOUTH CHINA SEA MILITARY CAPABILITY SERIES A Survey of Technologies and Capabilities on China’s Military Outposts in the South China Sea INTER-ISLAND COMMUNICATIONS J. Michael Dahm INTER-ISLAND COMMUNICATIONS J. Michael Dahm Copyright © 2020 The Johns Hopkins University Applied Physics Laboratory LLC. All Rights Reserved. This study contains the best opinion of the author based on publicly available, open- source information at time of issue. It does not necessarily represent the assessments or opinions of APL sponsors. The author is responsible for all analysis and annotations of satellite images contained in this report. Satellite images are published under license from Maxar Technologies/DigitalGlobe, Inc., which retains copyrights to the original images. Satellite images in this report may not be reproduced without the express permission of JHU/APL and Maxar Technologies/DigitalGlobe, Inc. See Appendix A for notes on sources and analytic methods. NSAD-R-20-048 July 2020 Inter-Island Communicaitons Contents Introduction .................................................................................................................. 1 Troposcatter Communications, 散射通信 ..................................................................... 2 VHF/UHF and Other Line-of-Sight Communications ...................................................... 6 4G Cellular Communications ........................................................................................ 7 Airborne Communications Layer .................................................................................
    [Show full text]
  • Department of Defense Program Acquisition Cost by Weapons System
    The estimated cost of this report or study for the Department of Defense is approximately $36,000 for the 2019 Fiscal Year. This includes $11,000 in expenses and $25,000 in DoD labor. Generated on 2019FEB14 RefID: B-1240A2B FY 2020 Program Acquisition Costs by Weapon System Major Weapon Systems Overview The performance of United States (U.S.) weapon systems are unmatched, ensuring that U.S. military forces have a tactical combat advantage over any adversary in any environmental situation. The Fiscal Year (FY) 2020 acquisition (Procurement and Research, Development, Test, and Evaluation (RDT&E)) funding requested by the Department of Defense (DoD) totals $247.3 billion, which includes funding in the Base budget and the Overseas Contingency Operations (OCO) fund, totaling $143.1 billion for Procurement and $104.3 billion for RDT&E. The funding in the budget request represents a balanced portfolio approach to implement the military force objective established by the National Defense Strategy. Of the $247.3 billion in the request, $83.9 billion finances Major Defense Acquisition Programs (MDAPs), which are acquisition programs that exceed a cost threshold established by the Under Secretary of Defense for Acquisition and Sustainment. To simplify the display of the various weapon systems, this book is organized by the following mission area categories: • Aircraft and Related Systems • Missiles and Munitions • Command, Control, Communications, • Shipbuilding and Maritime Systems Computers, and Intelligence (C4I) • Space Based Systems Systems • Science and Technology • Ground Systems • Mission Support Activities • Missile Defeat and Defense Programs FY 2020 Investment Total: $247.3 Billion $ in Billions Numbers may not add due to rounding Introduction FY 2020 Program Acquisition Costs by Weapon System The Distribution of Funding in FY 2020 for Procurement and RDT&E by Component and Category* $ in Billions $ in Billions * Funding in Mission Support activities are not represented in the above displays.
    [Show full text]
  • Link 16 Secure Voice J-Voice for the Entire Operations Team
    Product brief: Link 16 secure voice J-Voice for the entire operations team Since its early beginnings in the Vietnam War, Link 16 (L16) has been consistently improved and has subsequently developed into the primary military tactical data link for NATO and selected friendly nations. Commanders are able to employ L16 to exchange vast amounts of mission data between likewise equipped units in real time without fear of cyber attack or being subject to electronic counter measures. One key element of L16 capability is its ability to host secure voice channels – often referred to a J-Voice (Joint Tactical Information Distribution System – JTIDS) – and this is an area where Frequentis can add value. By using the field-proven and certified ground/air and ground/ground secure communications system iSecCOM, Frequentis provides the customer with unparalleled J-Voice connectivity to every iSecCOM position. Key features Link 16 secure voice iSecCOM enables Link 16 secure voice to be available at each operator position. Routed from the workstation via the Link 16 MIDS (multifunctional information distribution system) terminals, both channels A and B, (16kbps & 2.4kbps) are supported. Simplified communications and full control iSecCOM provides full-spectrum communication services, including all radio and telephony services, combined with selected data and Link 16 secure voice full radio remote control services. at a glance Designed by the operators and for the operators • Link 16 Secure Voice connectivity to combat aircraft Frequentis leverages decades of experience working • Embedded electronic-counter-counter- with operators to define the most user-friendly measures in every operator position HMI based on its field-proven, military-grade IT solutions used by multiple forces around the globe.
    [Show full text]
  • Air Defense Artillery Reference Handbook
    HEADQUARTERS FM 3-01.11 (FM 44-100-2) DEPARTMENT OF THE ARMY AIR DEFENSE ARTILLERY REFERENCE HANDBOOK DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. ∗FM 3-01.11 (FM 44-1-2) Field Manual Headquarters No. 3-01.11 Department of the Army Washington, DC, 31 OCTOBER 2000 Air Defense Artillery Reference Handbook Contents Page Preface ........................................................................................................................ iii Chapter 1 AIR DEFENSE ARTILLERY MISSION .....................................................................1-1 Mission.......................................................................................................................1-1 Air and Missile Defense in Relation to Army Tenets .................................................1-2 Air and Missile Defense in Force Protection..............................................................1-3 Air Defense Battlefield Operating System .................................................................1-3 Chapter 2 THREAT.....................................................................................................................2-1 The Evolving Threat...................................................................................................2-1 Electronic Warfare .....................................................................................................2-8 Weapons of Mass Destruction...................................................................................2-9 Summary....................................................................................................................2-9
    [Show full text]
  • Military Data Link Integration Application
    Military Data Link Integration Application James T. Sturdy Honeywell Defense and Space Electronic Systems 9201 San Mateo Blvd., NE Albuquerque, New Mexico 87113-2227 (505) 828-5703 Office (505) 828-5500 Fax [email protected] 1 Abstract The military uses tactical data link radios to send and receive digital voice, data, and video between vehicles and command and control facilities. These data link radios are interfaced to various mission computers and display systems. As outlined in the Joint Tactical Data Link Management Plan, a wide range of legacy military platforms will be upgraded to incorporate new data link radios through 2015 and beyond. The upgrade costs to do this will be enormous if traditional subsystem upgrade approaches are used. A need exists for a common, scalable and low cost military data link integration solution that can be used in multiple and disparate platform applications. The author will discuss such a design approach that can be used on each military platform application. The solution processes new and evolving messages with a database driven design so that the user can control message activation, deactivation, and processing instructions for each unique platform application. The database used for this capability is created by and maintained by the user. This allows a common design to work and to evolve on each unique platform without the need to modify the operational software. Background The military uses tactical data link radios to send and receive digital voice and data between their air, land, sea and space vehicles, and command and control facilities. On each vehicle and in each command and control facility, these data link radios are interfaced to various communications/mission computers and display systems.
    [Show full text]
  • JREAP Vs SIMPLE What’S the Verdict?
    JREAP vs SIMPLE What’s the Verdict? Joint Range Extension Application Protocol (JREAP) vs Standard Interface for Multiple Platform Link Evaluation (SIMPLE) Within the capability streams for distributing Tactical Data Link (TDL) information beyond normal communication limits there exists two military standards: JREAP and SIMPLE. Military staff have therefore asked the question “Which should I implement that can support operations?”. Both are NATO standards born out of the need to distribute information beyond the typical communication limits and provide a mechanism for linking into TDL systems. JREAP was originally implemented through Military Standard (MIL-STD)-3011 but has now been adopted under NATO cover Allied Tactical Data Link Publication (ATDLP)-5.18 (STANAG 5518) and SIMPLE through ATDLP-6.02 (STANAG 5602). In short, JREAP is a deployable tactical capability whereas SIMPLE is used in a test environment. However, this article scrutinises the capabilities and implementation of each and provides a comparison of abilities to support front-line operations. JREAP was developed due to the need to communicate data over long distances, i.e. Beyond Line of Sight (BLOS), without degradation to the message format or content. JREAP takes the message from the format it was originally in and encapsulates it within a JREAP wrapper so that the message can be transmitted over BLOS media and to those platforms not equipped with traditional Link 16 equipment such as Multifunctional Information Distribution Systems (MIDS) terminals. If one was to examine the history of JREAP publications the first MIL-STD-3011 issue is a cut down version of STANAG 5602 Edition 1 with additions to operate over a number of specified communication bearers.
    [Show full text]
  • Use Style: Paper Title
    Case Study: Development of a SANDF Tactical Data Link Network Enabling Capability Corné J. Smith & Jacobus P. Venter Interoperability Development Environment Council for Scientific and Industrial Research Pretoria, South Africa [email protected] / [email protected] Abstract— In the scope of Tactical Data Links (TDL), the South African National Defence Force (SANDF) started the journey to B. Why Tactical Data Links? establish a national TDL capability with the commencement of Voice communications via Radio Frequency (RF) their national Strategic Defence Procurement Packages (SDPP) communications systems has been the primary means of in 1999. These procurement packages saw the development of communications on the military battlefield since World War II. fighter, helicopter, frigate and submarine platforms with Furthermore Pike and Sherman [3] describe how World War II requirements for TDL capabilities. In this, the SANDF pursued sparked the development of components and equipment that the development of an indigenous TDL data model and data first allowed Very High Frequency (VHF) and Ultra High transfer protocol standard appropriately named Link-ZA. This Frequency (UHF) communication systems. These voice paper expands on the implementation evolution and challenges of communications did however impose severe limitations when the standard over the last 10 years and provides a generic TDL coherent and detailed battlespace information needed to be Capability Model with a strategy for establishing interoperability conveyed. Voice communications proved to be slow and prone between different implementations of the standard, thus establishing a SANDF tactical Network Enabled Capability. to misunderstanding, thus adding inefficiencies in the execution of the OODA loop. Keywords-component; Network Enabled Defence, Tactcial Data Tactical Data Links (TDL) evolved from combining Links, Link-ZA.
    [Show full text]
  • Tadil-A Tadil-B Tadil-C Tadil-J Nato Link 1
    APPENDIX A. TACTICAL DIGITAL INFORMATION LINKS A tactical digital information link (TADIL) is a Joint Staff-approved, standardized communications link TADIL-C that transmits digital information. Current practice is to characterize a TADIL by its standardized message formats and transmission characteristics. TADILs TADIL-C is also known as Link 4A. It is an unsecure, time-division digital data link conducted between an interface two or more command and control or air defense controlling unit; e.g., TAOC or airborne weapons systems via a single or multiple network warning and control system (AWACS) and architecture and multiple communication media for appropriately equipped aircraft. Information exchange exchange of tactical information. (JP 1-02) at 5,000 bps can occur in one of three modes: full two- way (ground to air to ground), one way air to ground, In AAW operations,TADILs share air track informa- or one way ground to air. tion to build a comprehensive picture of the current air situation in a near real time basis. TADILs used by the MACCS in air defense operations follow. TADIL-J TADIL-J is also known as Link 16. It is a secure, high- TADIL-A speed digital data link. It uses the joint tactical information distribution system transmission (JTIDS) characteristics and protocols, conventions, and fixed- TADIL-A is also known as Link 11. It is a secure, length message formats defined by the JTIDS half-duplex (poll-response) netted digital data link that technical interface design plan. TADIL-J is intended uses parallel transmission frame characteristics and to replace or augment many existing TADILs as the standard message formats.
    [Show full text]
  • FM 3-01.11 Air Defense Artillery Reference Handbook
    HEADQUARTERS FM 3-01.11 (FM 44-100-2) DEPARTMENT OF THE ARMY AIR DEFENSE ARTILLERY REFERENCE HANDBOOK DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. ∗FM 3-01.11 (FM 44-1-2) Field Manual Headquarters No. 3-01.11 Department of the Arm Washington, DC, 31 OCTOBER 2000 Air Defense Artillery Reference Handbook Contents Page Preface ........................................................................................................................ iii Chapter 1 AIR DEFENSE ARTILLERY MISSION .....................................................................1-1 Mission.......................................................................................................................1-1 Air and Missile Defense in Relation to Army Tenets .................................................1-2 Air and Missile Defense in Force Protection..............................................................1-3 Air Defense Battlefield Operating System .................................................................1-3 Chapter 2 THREAT.....................................................................................................................2-1 The Evolving Threat...................................................................................................2-1 Electronic Warfare .....................................................................................................2-8 Weapons of Mass Destruction...................................................................................2-9 Summary....................................................................................................................2-9
    [Show full text]