feature update to windows 10 version 1903 stuck download Fix Windows Update 1903 freezing at 60-70% on Windows 10. Windows has released Windows Update 1903 with many new features on May 21, 2019. But many of the users are yet to receive the update, and when they are trying to update their Windows they are getting stuck at 60-70%. If you are facing the same problem and finding a solution to your problem, you are in the right place. There are many reasons for which this problem can happen to the user, but for the majority of the users, it is a Windows Update bug. Follow these easy solutions if you cannot install Windows Update 1903 normally from Windows settings application. Though this post is written considering the problem related to Windows Update 1903, these fixes will also work for the future Windows 10 Updates also. But before moving ahead for the fixes, first, attempt these initial workarounds. Initial Workarounds- 1. Check for Windows Update from Settings application. You can access the Settings application just by pressing Windows Key+I . 2. Check for the Windows Update settings. If any of these attempts haven’t fixed your problem, go for these solutions. Fix-1 Delete contents of MachineKey Folder- Some users have reported solving their problem by altering some changes in their C: drive in Safe Mode. Follow these steps minutely and try updating your windows after executing all of these steps- 1. First, press the Windows ke y and ‘ R ‘ key together. This will open up the Run window. 2. In the Run window, type “ msconfig ” and then press the ‘Enter’ key from your keyboard. 3. Now, go to the “ Boot ” tab and check the “ Safe mode ” option. 4. Then, click on “ Apply ” and “ OK ” to restart your computer in Safe Mode . 5. Now, when you have booted in, press Windows Key+E to open File Explorer window, navigate to this location- 6. Now, press Ctrl+A to select all the contents of the MachineKeys folder and press ‘ Delete ‘ to delete all of the contents. If in case you can’t delete the contents of the MachineKey folder, follow these following steps to move the folder and create another empty folder in its place. a. Navigate to this location in your File Explorer – Now, select the “ MachineKeys ” folder and press Ctrl+X to cut it and then go to Desktop (or any of your favorite location on your disk) and press Ctrl+V to paste it there. b. Now, navigate to the same location i.e. – Now, right-click on “ New ” and click on “ Folder “. c. Now, right-click on “ New Folder ” and click on “ Rename ” and name the folder as “ MachineKeys “. This will create an empty MachineKeys folder. 7. Now navigate to this location in the File Explorer – Now, scroll down to find the “ Inetsrv ” folder. Right-click on it and click on “ Rename ” to name it as “ inetsrv.old “. Reboo t your computer back to normal Windows again. 8. Now, press Windows key+R to launch Run and type “ optionalfeatures ” and hit Enter. Windows Features window will be opened. 9. Now, Windows Features window, scroll down and uncheck “ Internet Information Services “. 10. Click on “ OK ” to disable the optional feature. Reboot your computer. After rebooting try updating Windows following any of the processes described in Fix 1 or Fix 2 or try updating directly from Settings application. Your Windows should be upgraded to Windows 10 1903 build without any error. Fix-2 Use Windows Media Creation Tool- You can use the Windows Media Creation Tool (MCT) to update your Windows 10. It is a very easy process, just follow these steps to update your Windows with MCT. 2. Now, double click “ MediaCreationTool1903 ” to run it. 3. Now, click on “ Accept ” to accept the Microsoft terms and conditions for using the software. 4. Now, choose “ Upgrade this PC now ” and click on “ Next ” to start the up-gradation process. You should have gone through the up-gradation process without any error. Go for the next fix if the up-gradation process still stuck at 60-70% again. Fix-3 Windows 10 Update from Microsoft website directly- You can update your Windows 10 directly from the Microsoft website just by downloading WindowsUpdate.exe from the website and running it on your computer. [NOTE- This fix will require an active internet connection to your Windows 10 device] 2. Click on “ Update Now “. 2. Now, double click on “ Windows10Upgrade9252 ” to start the Windows Update Assistant . You should be going through the up-gradation process without facing any error. Sambit is a Mechanical Engineer By qualification who loves to write about Windows 10 and solutions to weirdest possible problems. Windows 10 update 1903 stalled. The Windows 10 feature update to version 1903 has been stalled at 88% for over 4 hours. This is the second attempt - the first downloaded, but failed to install. Does anyone have a solution? Edit: The Windows Update Troubleshooter did not detect any problems. Subscribe Subscribe to RSS feed. Report abuse. Let it run as long as you can to see if it resolves itself. If not power off and let it cool down for 10 minutes or more, then power on to see if it rolls back or not. If not Here are steps to recover from failed Version Update install which causes Windows to fail to start or function: 1) Try whichever method works in this tutorial link to get into Advanced Startup Options to Go Back to Old Version if this is a version update: https://www.tenforums.com/tutorials/2294-advanc. . Easiest is to restart or force shutdown the PC 3 times. If you are able to access System Restore or Go Back and it fails, skip to step 3. 2) If necessary follow the steps in the middle of this download page to create bootable installation media to access the repair options if not accessible by any other method: http://windows.microsoft.com/en-us/windows-10/m. . The bootable media is also the only method that doesn't require the password if you're stuck on that. Boot media by powering up the PC while pressing the BIOS Boot Menu Key: https://www.sysnative.com/forums/hardware-tutor. You may need to enter BIOS/UEFI Setup to turn off Fast Boot if it won't allow the Boot Menu key to interrupt starting Windows: https://www.mydigitallife.net/comprehensive-lis. Choose UEFI version of media if offered, browse to second screen to Repair Your Computer link, then Advanced Troubleshoot options to choose More Options to Go Back to Old Version if this was a version Update. If it rolls back then you can hide the Windows Updates and Version Upgrade responsible until they mature by installing and running immediately the Hide Updates tool: https://www.howtogeek.com/224471/how-to-prevent. 3) If this fails try a Startup Repair, or go back to Troubleshoot Options on the previous screen to Reset your PC which will save your files while reinstalling Windows. 4) If that fails you can use the booted media created in Step 2 to Clean Install the latest version which should get you past all difficulties as it has hundreds of thousands of others who have followed the steps in this link and never come back to report another problem: http://answers.microsoft.com/en-us/windows/wiki. The link compiles the best possible install of Windows 10 that will stay that way as long as you stick with the tools and methods given. There is a step to rescue files from the same bootable media: http://answers.microsoft.com/en-us/windows/wiki. Make sure during the booted install to follow the illustrated steps to delete all partitions down to Unallocated Space to get it cleanest, then click Next to let it auto-create the needed partitions, format them and begin install - this makes it foolproof. The media provided for the Clean Install is latest and normally the problems go away with the Clean Install, however if they don't you can find earlier version media to use here: https://tb.rg-adguard.net/public.php Burn to DVD or create bootable 8+gb flash stick installer using this tool installed to Windows: https://www.microsoft.com/en-us/download/detail. Then once you're back in Windows 10, you can block the problem Windows or Version Update using one of these methods: https://www.howtogeek.com/224471/how-to-prevent. Good news, Microsoft is changing Update policies soon as announced recently here: https://blogs.windows.com/windowsexperience/201. Until then you can manage Updates with all possible options here: https://www.makeuseof.com/tag/manage-windows-up. I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved. ______Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it. Windows MVP 2010-20. Millions helped via my tutorials and personally in forums for 12 years. Now an Independent Advisor. Windows 10 feature update Version 21H1 stuck downloading (7 ways to fix) Microsoft has announced the public release of Windows 10 version 21H1 on May 18, 2021. For Device running windows 10 2004 or 20H2, Windows 10 feature update version 21H1 is a very small release delivered by way of an enablement package as we saw with the October 2020 Update. And older versions of Windows 10 1909 or 1903 will be required to Install the full update. The latest feature update is quicker to install takes few minutes like regular windows updates. But few users report “Feature update to Windows 10 version 21H1 stuck at downloading 100 ”. Or Windows 10 21H1 update get stuck installing at zero percent. Related Articles. Security software, corrupted system files, internet interruption or not enough storage space are some common reason cause windows update stuck downloading or installing. If you are also a victim of similar problem, apply the solutions listed below. Note: These solutions also applicable if regular windows updates (Cumulative update) stuck download or install on windows 10. Windows 10 21H1 Update stuck downloading. Wait a few more moments and check if there is improvement in the download or installation process. Open taskmanager using Ctrl+ Shift+ Esc key , Go to the Performance tab and check the activity of CPU, Memory, Disk, and Internet connection. Make sure you have a Good Stable Internet connection To Download the Update files from Microsoft Server. Temporarily disable or uninstall third-party antivirus and disconnect VPN (If configured) And most importantly check your system drive (Basically its C: drive) have enough free space to download and Install Windows updates. In addition, If there are any USB devices (like printers, USB flash drives, etc.) connected to your PC, you can try removing them from your PC. If your Windows 10 update is stuck for an hour or longer, then force a restart and apply the solutions listed below. Also, perform a clean boot and check for updates, Which may fix the problem if any third-party application, service causing the windows update stuck. Check minimum system requirement for windows 10 21H1. If you have older desktop computer where you trying to upgrade to the latest windows 10 21H1 update we recommend check it meet the minimum system requirement for install the latest windows 10 may 2021 update. Microsoft recommends the following system requirement to install windows 10 21H1 update. RAM 1GB for 32-bit and 2GB for 64-bit Windows 10 HDD space 32GB CPU 1GHz or faster Compatible with x86 or x64 instruction set. Supports PAE, NX and SSE2 Supports CMPXCHG16b, LAHF/SAHF and PrefetchW for 64-bit Windows 10 Screen resolution 800 x 600 Graphics Microsoft DirectX 9 or later with WDDM 1.0 driver. Restart windows update service. If due to some reason windows update service or its related services not started or stuck running it may result windows update fail to stuck download. We recommend check the Windows update service and its related services (BITS, sysmain) are in running state. Open windows services using services.msc Scroll down and look for Windows update service, check and start these services ( if not running ). Do the same with its related services BITS and Sysmain. Correct Time and regional settings. Also, incorrect regional settings cause Windows 10 feature update Failure or stuck download. Make sure your Regional and language settings are correct. You Can Check And Correct them following below. Press Windows + I to open Settings Select Time & Language then Select Region & Language Here Verify your Country/Region is correct from the drop-down list. Run windows update troubleshooter. Windows 10 has its own set of tools to detect and resolve problems like this. Run the windows update troubleshooter that can help you analyze and resolve issues related to Windows update. On your keyboard press Windows key + S type troubleshoot and select Troubleshoot settings, Click on the addition troubleshooter link (refer to image below) Now locate and select windows update from the list then click Run the troubleshooter. This will check the system for errors and problems which prevent install windows 10 21h1 update. The diagnosing process takes a few minutes to complete and fix the problems itself. After complete the troubleshooting Restart windows. It should hopefully clear up the problems causing Windows Update to get stuck. Now check for Update to download and install windows update, If still Having windows update stuck at any point follow next step. Delete SoftwareDistribution Cache. If you’re still having trouble after running the troubleshooter, performing the same actions manually may help where the troubleshooter didn’t. Deleting windows update cache files is another solution that may just work for you. First, we need to Stop some Windows update and its related services. To do this. Open Command prompt as Administrator then type below commands one by one and hit enter to execute. net stop wuauserv To Stop The Windows Update Service net stop bits To Stop Background intelligent transfer service. net stop dosvc To Stop the Delivery Optimization Service. Next press windows key + E to open windows explorer and navigate C:\Windows\SoftwareDistribution\download Here delete all files or folders inside the download folder, to do this press Ctrl + A to select all then hit the del key to delete them. It may ask you for administrator permission. Give it, Don’t worry. There’s nothing vital here. Windows Update downloads a fresh copy of these files from the Microsoft server when next time you check for windows update. * Note: If you cannot delete the folder (folder in use), then restart your computer in “ Safe Mode ” and repeat the procedure. Again move to the command prompt and restart the Previously stopped services to this type below commands one by one and press enter key. net start wuauserv To Start The Windows Update Service net start bits To Start Background intelligent transfer service. net start dosvc To Start the Delivery Optimization Service. When the service has restarted, you can close Command Prompt and restart Windows. Give Windows Update another try and see if your problem has been fixed. You will be able to download and install the updates successfully. Repair Corrupted Windows system files. SFC command is an easy solution to fix some windows related problems. If any missing or damaged system files create the problem System File Checker is very helpful to fix. Press Windows key + S, Type CMD and Run as administrator when command prompt appears. Here type command SFC /SCANNOW and hit the enter key to execute the command. This will scan your system for all its important system files, and replace them where necessary. Wait until Windows scans and repairs system files. When the System file check and repair is completed, restart your computer and check for windows updates from Settings – > update and security -> check for updates. hope this time updates install without any problem. Manually Install Windows 10 May 2021 update. Also, Microsoft released Windows 10 upgrade assistant, Media Creation Tool, help you download and install Windows 10 version 21H1 updates manually and Deal with issues like feature update to Windows 10 version 21H1 failed to install, Stuck downloading etc. To Install Windows 10 May 2021 update using media creation tool follow steps below. Download the Media Creation Tool from the Microsoft support website. Double-click the file to start the process. Accept the license agreement And be patient while the tool “gets things ready”. Once the installer has set up, you will be asked to either Upgrade this PC now or Create installation media for another PC . Select Upgrade this PC now option. And follow on screen instructions. The Windows 10 Download and installation process could take a while, so please be patient. Eventually, you will get to a screen prompting you for information or to reboot the computer. Just follow the on-screen instructions and when it’s finished, the windows 10 version 21H1 will be installed on your computer. Also, you can download Windows 10 may 2021 update ISO files Direct from the Microsoft server to perform Clean installation. 7 Basic Troubleshooting steps to fix Windows 10 problems Solved: System Service Exception Error In Windows 10, 8.1 and 7 Fix APC_INDEX_MISMATCH Stop code 0x00000001 on Windows 10 Solved : Windows 10 scanning and repairing drive c stuck at 100 How to Quickly Fix Blue Screen of Death Errors in Windows 10. The post Windows 10 feature update Version 21H1 stuck downloading (7 ways to fix) appeared first on How To Fix Windows. This post first appeared on How To Fix Windows - Get Solved All Windows 10 Problems, please read the originial post: here. Windows 10 update gets stuck at 82% I am desperate. Whether I want it or not Windows keeps on updating and always get stuck at 82%. I have seen that many people have this problem and I have tried all kinds of suggestions to fix it. The latest one is to run DISM /online /cleanup-image /restorehealth at the command prompt. I just found out that that it did not do any good. After I shut down and restarted the computer just went back to the old windows version and immediately I got a message that it was downloading the new update again. I am getting to the point that I cannot use the computer anymore. I did the ISO, in place update (not sure waht the wording is. Is there anyway to stop the updating? Can Microsoft not fix this? Subscribe Subscribe to RSS feed. Report abuse. Replies (20) * Please try a lower page number. * Please enter only numbers. * Please try a lower page number. * Please enter only numbers. I'm Ugo, a Microsoft Independent Advisor willing to help other Microsoft customers. Regarding your question, as a first troubelshooting option, please try to reset Windows Update with a script: Other 5 additional tips can be found here: Please let me know if this helped somehow. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Open administrative Command Prompt and type following commands one-by-one followed by Enter key. net stop wuauserv net stop cryptSvc net stop bits net stop msiserver Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old Ren C:\Windows\System32\catroot2 Catroot2.old net start wuauserv net start cryptSvc net start bits net start msiserver. Close Command Prompt and see if Windows Updates works then. If you like, you can block feature updates as well: https://www.kapilarya.com/how-to-block-feature-. Hope this helps, Good luck! Microsoft MVP (Windows IT Pro), since 2014 · Windows Insider MVP · Windows Help (www.kapilarya.com) Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Report abuse. 3 people found this reply helpful. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. In the past when I checked the event log in softwaredistribution I always found a entry that said 1709 failed. An example is shown below. 2018-03-09 08:37:36:059-0500 1 182 [AGENT_INSTALLING_FAILED] 101 203 80248007 UpdateOrchestrator Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80248007: Feature update to Windows 10, version 1709. This time, very strange, there is no mention of 1709. I have copied the last entries. By looking at the time it is possible to see that they start where it showed the black screen. The second entry must be after I had restarted the computer. The last entry must be when it stopped at 82%. You see that it says it found 0 updates. This is puzzling. If it is downloading something else than 1709 why would it stop at 75% and then at 82 % again. update stuck at 90% after windows tell me to restart the computer, it gets stuck at 90% for more than 10 hours long, and I've tried to update & had this for 3 times, still not getting up to date. current version 1803, attempt to update to 1903. tried troubleshooting windows update but this happens again after it tells me to restart pc, couldn't pass this 90% process issue, always stuck at 90%, so I had no choice but to restart the computer and let it cancel itself. so how does this update work anyway, does it download files during the update % screen or what? it makes no sense taking that much long if it install things from hdd, if it does take more than 10 hours at least let me get some clue to estimate how much more longer will it take, is it cleaning up hdd space or extracting files or moving files here and there or checking something else. or is there something wrong with some files. the hdd lamp not even flashing. let me have that clue, a simple '90%' doesn't help.