Burney Gear Co

Home , Arbor press

AUCTION OUTSTANDING GEAR & PUMP REPAIR FACILITY! Featuring: Gear Hobbers to 72", Vertical & Horizontal Boring Mills, Large Capacity CNC Lathes, Vertical & Horizontal Machining Centers, Wide Range of High Quality Support Machinery, Huge Quantities of Tooling & Measuring Equipment, Material Handling Equipment, Vehicles, & Much, Much More!

Former Assets of BURNEY GEAR CO. 6702 Linwood Avenue SHREVEPORT, LOUISIANA 71106 (See Directions on Back Page) THURSDAY, DECEMBER 4 • 10:00 A.M. INSPECTION: Wednesday, December 3 9:00 A.M. to 4:00 P.M. & Morning of Sale

A 12% BUYER’S PREMIUM WILL APPLY ONSITE A 15% BUYER’S PREMIUM WILL APPLY VIA WEBCAST

> MAZAK SLANT TURN 108" SCHIESS DOUBLE COLUMN VERTICAL BORING MILL 60 X 2500 CNC LATHE CNC

2005

CNC BLANCHARD MDL. 26HD-48 VERTICAL GOULD & EBERHARDT 72 HWD BEHRINGER CNC ROTARY SURFACE GRINDER GEAR HOBBER HORIZONTAL BANDSAW Read Terms and On-Site Bidding in Shreveport, Louisiana or Bid by Webcast at Conditions on Back Page of Brochure

Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 Bob Braman LA LIC. #1099-07 • Ron Moore LA LIC. #851-07 E-MAIL: [email protected] HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com CNC LATHES MAZAK SLANT-TURN 60 UNIVERSAL 2500, Fanuc System 6TB CNC control, 36" swing over bed, 27" swing over crosslide, 6-1/2" spndl. hole, spds. 2–750 RPM, 40 HP spndl. drive motor, 10 pos. vert. turret, 32" dia. 4-jaw independent chuck, 18" dia. 3-jaw hyd. through hole chuck, hyd. pwr. tailstock, H.D. roller- jaw steady rest, chip conveyor, S/N 9476. MORI SEIKI MDL. SL-7, retrofitted w/Fanuc 0T CNC control, 35.4" swing over bed, 29.8" turning dia., 63" dist. btn. centers, 4.13" spndl. bore, spds. 10–1,800 RPM, 12 pos. vert. turret, 50 HP spndl. drive motor, 24-1/2" dia. 4-jaw chuck, hyd. tailstock, chip conveyor, S/N 13. (2) HAAS MDL. HL-4, new 1997, Haas CNC control, 24" sw. over bed, 40" dist. btn. centers, 3-1/8" spndl. through hole, CNC 3,500 RPM, 30 HP spndl. drive motor, Haas 12-position turning MAZAK SLANT-TURN 60 X 2500 CNC LATHE turret, 10" dia. through hole hyd. chuck, programable tailstock body, full length chip conveyor, S/N 90911, S/N 60923. 1997 MAZAK SLANT-TURN 30 UNIVERSAL 1500, retrofitted w/ Fanuc 0T CNC control, 20" sw. over bed, 13.5" max. turning dia., 60" centers, 3.15" spndl. bore, 3,000 RPM, 30 HP spndl. drive motor, 8-station vert. turret, 12" dia. 3-jaw hyd. chuck, chip conveyor, S/N N/A. CNC MULTI-AXIS LATHES MORI SEIKI MDL. SL-300 AMC – 3-AXIS, new 1997, Mori Seiki/Fanuc MSC-518 CNC control, C-axis spndl., 16.54" CNC turning dia., 40" dist. btn. centers, 2.37" bar cap., 3,300 RPM spds., 25 HP spndl. drive motor, 7-1/2 HP live tooling drive, 10" HAAS HL-4 CNC LATHES dia. chuck, 12 pos. vert. turning and milling turret, hyd. tailstock, chip conveyor, arranged for tool presetter, wide selection right angle and straight rotary milling holders, S/N 43. RETROFITTED WASINO MDL. LJ-103M – 3-AXIS, Fanuc 10T CNC control, 17" sw. over bed, 40" dist. btn. centers, 2-1/2" bar cap., spds. 35– 3,500 RPM, 25 HP spndl. motor, 12 pos. vert. turret, C-axis spndl. positioning, 5 HP/3,500 RPM live milling, full length chip conveyor, 10" dia. 3-jaw chuck, tailstock, S/N N/A. CNC SWISS TYPE SCREW MACHINES CITIZEN CINCOM MDL. E-32 SWISS TYPE, Fanuc System 10T CNC control, 1.26" max. bar cap., 12.6" max. headstock travel, 20 rotary tool positions, spdl. spds. 60–6,000 RPM, rotary tool spds. 40–4,000 RPM, 10 HP main drive motor, bar suppt., hydrodynamic 12' barfeed, assorted tooling, S/N 1050. CITIZEN CINCOM MDL. F-25, Fanuc 10T CNC control, 1" max. bar cap., Citizen 12' hydrodynamic barfeed, upper and lower CNC turrets, pick-off attach., S/N 2370. MORI SEIKI SL-7 CNC LATHE

1997

CNC CNC MORI SEIKI SL-300 AMC 3-AXIS CNC LATHE CITIZEN E-32 SWISS TYPE CNC SCREW MACHINE 2 3 < 108" SCHIESS DOUBLE COLUMN VERTICAL BORING MILL

> 54" GIDDINGS & LEWIS VERTICAL BORING MILL

CNC VERTICAL MACHINING CENTERS OPEN SIDE PLANER MILL MORI SEIKI MDL. MV-40, Fanuc 10M CNC control, 17-1/2" x 43-1/4" table, 31.5"X, CLEVELAND, 44"W. x 170-3/4"L. table, dbl. 16.1"Y, 20.1"Z axis travels, CAT-40 spndl. taper, 80–8,000 RPM, 10 HP drive motor, V-way design, approx. 48" height under rail, 20 pos. ATC, S/N 1247. Taal H.D. #50 taper milling head, spds.: 104– (2) MORI SEIKI MDL. MV35/40, Fanuc 11M CNC control, 14" x 43-1/4" table, 30"X, 1,180 RPM, variable table and cross rail feeds, 13.8"Y, 17.7"Z axis travels, CAT-40 spndl. taper, spds. 130–6,000 RPM, 10 HP spndl. pendant control. drive motor, 20 pos. ATC, S/N 580, S/N 583 w/4th axis drive and wiring, Nikken horizontal 4th axis rotary table w/tailstock. MILLING MACHINES (2) EXCEL MDL. 510 COLT, Fanuc 0M CNC control, 27.5" x 16.5" table size, 20"X, (2) BRIDGEPORT SERIES 1 VERTICAL 16.2"Y, 18.1"Z axis travels, CAT-40 spndl. taper, 200–6,000 RPM, 18 pos. ATC, TURRETS, 9" x 48" table, pwr. feed, S/N S/N’s N/A. 252956 w/2-axis Anilam D.R.O., S/N 243297 w/2-axis Newell D.R.O. VERTICAL BORING MILLS (2) BRIDGEPORT MDL. 2J VERTICAL 108" SCHIESS DOUBLE COLUMN, 94-1/2" dia. table w/(4) top jaws, 108" max. TURRETS, 42" table, pwr. feed, 2-axis D.R.O., swing, approx. 60" height under rail, table spds.: 1.18–38 RPM, 50 HP drive motor, 39" spds.: 60–4,200 RPM, chrome ways, S/N stroke w/L.H. swivel ram head, 30" stroke 5 pos. R.H. turret, 30" stroke R.H. side head 4 pos. toolpost, (2) sets of table jaws, floor standing design, S/N 177580. 211419, S/N 209233. 54" GIDDINGS & LEWIS “HYPRO” DOUBLE COLUMN, Mdl. 54VBM, 52" dia. table, CINCINNATI MDL. 2L UNIVERSAL 54" max. swing, approx. 60" under rail, 32" stroke tilting ram head, 28" stroke 5 pos. HORIZONTAL, 10" x 53" table, spds.: 23–1,200 turret head, 24" stroke side head, table spds.: 2.65–72 RPM, 40 HP table drive motor, RPM, #50 taper spndl. w/arbor suppts., S/N floor standing design, pendant control, (4) top jaws, floor standing design, S/N 7532. 2A2U1H-45.

CNC MORI SEIKI MV-40 CNC VERTICAL BRIDGEPORT SERIES I VERTICAL MACHINING CENTER CLEVELAND OPENSIDE PLANER MILL TURRET MILLING MACHINE 2 3 1998

CNC MACHINING SYSTEMS HMC-60 CNC HORIZONTAL MACHINING CENTER

LARGE TRAVELS

4" SUMMIT TABLE TYPE HORIZONTAL BORING MILL

TABLE TYPE HORIZONTAL BORING MILLS 4" SUMMIT MDL. 4" HBM, 48" x 60" built in rotary table, 72" X-axis table cross travel, 60" longitudinal travel, 64" vert. travel, 20" built-in face plate, spds. 9–1,000 RPM, 15 HP, outboard suppt., 3-axis D.R.O., H&G ways, outriggers, telescopic way covers, S/N 549. 4" SUMMIT MDL. AFD100, 43" x 51" built-in rotary table, 63" cross travel, 48" vert. travel, 19-1/2" built-in facing head, outboard suppt., pendant control, 4-axis D.R.O., spds. to 1,200 RPM, extended length right angle attach., telescopic way covers, S/N 143. 4" CINCINNATI GILBERT, 43-1/8" x 65-1/2" table, 50" cross travel, approx. 36" longitudinal travel, 48" vert. travel, hardened and ground bed and saddle ways, variable feeds, full function pendant control, spds.: 8–1,750 RPM, 30" spndl. travel, 15 HP spndl. drive motor, Mini‑Pak Reliance elec. variable spd. drive system, 3-axis Newell Topaz D.R.O., S/N 4C-125. 4" SUMMIT TABLE TYPE HORIZONTAL BORING MILL CNC HORIZONTAL MACHINING CENTER MACHINING SYSTEMS MDL. HMC-60, new 1998, Autocon CNC control, 60"X, 40"Y, 28"Z axis travels, 28" sq. pallet w/1 deg. indexing, 48 pos. auto. tool changer, CAT-50 spndl. taper, 3,000 RPM spds., 30 HP spndl. drive motor, chip conveyor, S/N 317. VERTICAL GEAR HOBBING MACHINES GOULD & EBERHARDT MDL. 72 HWD, 84" max. dia. spur gear (w/o support), 24" max. face cap., max. hob dia. 10-3/4", 42" dia. table, 10" table bore, 1-1/4" hob arbor, (1) Thread Worm Mdl. 20T driver time component, modern wiring, tailstock w/18-1/8" ht. riser block, 15 HP drive motor, large qty. change gears, S/N 3050A10. GOULD & EBERHARDT MDL. 48H, 2-1/2 max. diametrical pitch, 16" max. face (12" helical), 48" max. gear dia. (32" w/support), 8" max. hob dia., 25" dia. table, 10 HP drive motor, tailstock, change gears, S/N 3276-A6. GOULD & EBERHARDT MDL. 24H, 3-1/2 max. diametrical pitch, 15" max. face (12" helical), 24" max. gear dia. (18" w/support), 6" max. hob dia., 18" dia. table, 7-1/2 HP drive motor, tailstock, change gears, S/N 563-03. BARBER COLEMAN MDL. 10-12, 12" max. gear dia., 10" max. gear face, rapid traverse, pwr. tail center, auto. feed, 3-cut cycle, hob shift, S/N 3700101370. BARBER COLEMAN MDL. 3 (6-10), 16 @ 2", 48 @ 6" max. diametrical pitch x diameter, 6" max. gear dia., 10-1/2" hob carriage trav., 2-1/6" max. hob dia., 2 HP drive motor, S/N 2853. 4" CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL 4 5 (1 OF 2) LEES BRADNER GEAR THREAD & WORM MILLS

FELLOWS 36-6 VERTICAL GOULD & EBERHARDT 72 HWD GEAR HOBBER GEAR SHAPER

JONES & LAMSON THREAD GRINDER

PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.

< 60" GLEASON BEVEL GEAR PLANER GOULD & EBERHARDT WORM GEAR HOBBING MACHINE

VERTICAL GEAR SHAPING MACHINES WORM GEAR HOBBING MACHINE FELLOWS MDL. 36-6, 36" max. pitch dia., 40" max. workpiece dia., 6" max. GOULD & EBERHARDT, 25" dia. table, approx. 60" face width, 45 deg. max. helix angle, approx. 5.875" spndl. hole, 18–300 SPM, max. gear diameter, 8" table through hole, approx. 28" change gears, depth feed timer, S/N 28922. hob slide travel, 20 HP drive motor, custom built 8-1/8" ht. FELLOWS MDL. 645A3, 18" diameter, 3" face width, S/N DPC400350-E. tailstock riser block, sowing away tailstock. BEVEL GEAR PLANING MACHINES HOB SHARPENER GLEASON #54, 60" max. gear dia., 38.25" longest cone distance, S/N N.A. BARBER COLEMAN MDL. 10-12, 10" max. hob dia., GLEASON #12, 12" max. gear dia., 3-12" max. gear face, S/N 9986. 12" max. hob length, 2" max. gash, sparkout cycle, fully automatic, newer hydraulics, S/N 3700101370. GEAR THREAD & WORM MILLS LEES BRADNER, Mdl. HT-12x54, 24" swing over bedways, 12" swing over THREAD GRINDER cutter carriage, 54" dist. btn. centers, 6-1/8" spndl. hole, 3-7/8" max. hob JONES & LAMSON MDL. TG6X36, 6" max. work dia., cutter dia., change gears, S/N HT-8121. 36" max. work lgth., U.S. Motors Varidyne variable spd. LEES BRADNER, Mdl. LT-9x54, 18" swing over bedways, 9" swing over drive, auto. wheel infeed, 2-way grinding, change gear cutter carriage, 54" dist. btn. centers, 2-3/4" spndl. hole, air chucking, 3" max. set, wheel dressing equipment, variable spd. grinding hob cutter dia., 5 HP milling arbor drive, S/N LT-423. wheel, S/N 111296.

GEAR MACHINE ACCESSORIES DOZENS OF GEAR HOBS INCLUDING (10) TIN COATED HOBS, up to 8-1/2" dia. x 10" lengths; H.D. HOB ARBORS, up to 4" dia. ; GEAR SHAPER CUTTERS; SINGLE TOOTH INVOLUTE CUTTERS; SPROCKET EQUIPMENT; LARGE QUANTITY OF GEAR FIXTURE PLATES AND MOUNTING ARBORS. HYDRAULIC GEAR & BEARING PULLER SYSTEM POSILOCK MDL. PH-102T HEAVY DUTY, Enerpac hyd. pwr. supply system, assorted jaw attachs., adj. height frame.

PARTIAL VIEW OF GEAR PARTIAL VIEW OF GEAR HOBBER CHANGE GEARS HOBS & CUTTERS 4 5 < 40" X 144" AMERICAN PACEMAKER HEAVY DUTY ENGINE LATHE

> SUMMIT 50" X 320" AUCTION ENGINE Former Assets of LATHE BURNEY GEAR CO. 6702 Linwood Avenue SHREVEPORT, LOUISIANA 71106 (See Directions on Back Page) 1990 THURSDAY, DECEMBER 4 10:00 A.M.

ENGINE LATHES ENGINE LATHES, CONTINUED SUMMIT 50" X 320", new 1990, 50" sw. over bed, approx. 40" sw. LODGE & SHIPLEY 20" X 54" “POWERTURN,” 24-5/8" sw. over over crosslide, 5-1/2" spndl. hole, variable spds.: 2–500 RPM, carriage, 17-3/4" sw. over crosslide, 54" dist. btn. centers, spds.: taper attach., (3) H.D. steadyrests, pwr. rapid traverse, pwr. 14–1,160 RPM, 4-jaw chuck, S/N 44246. compound, 40 HP drive motor, followrest, 36" dia. 4-jaw chuck, MAZAK 18" X 40", Mdl. 860, 40" dist. btn. centers, 10-1/2" sw. digital spndl. spd. readout, Baldor Vector variable spd. drive, inch/ over crosslide, spds.: 37–1,500 RPM, taper attach., 3-1/8" spNdl. metric thdng., S/N 87760102. hole, S/N 29359W. AMERICAN PACEMAKER 40" X 144" HEAVY DUTY, Style H, CLAUSING COLCHESTER 17" X 100", 3-1/8" spNdl. hole, spds.: 40" actual swing over bed, approx. 32" sw. over crosslide, 144" 20–1,600 RPM, inch/metric thdng., taper attach., 3-jaw chuck, (2) dist. btn. centers, spds.: 6–600 RPM, 2-7/8" spndl. hole, (2) H.D. steadyrests, S/N 7/0220/12185. roller jaw steadyrests, taper attach., S/N 76811-62. LeBLOND 15" X 54" “SERVO-SHIFT,” 35–1,800 RPM, 2-axis AXELSON 22" X 108", approx. 22-1/2" sw. over crosslide, 2-1/4" DRO, inch/metric threading, 4-jaw chuck, steady rest, S/N 12C-127. spndl. hole, spds.: 9.5–1,288 RPM, hardened and ground bed, taper attach., 21" dia. 4-jaw independent chuck, S/N 4915. CINCINNATI 14" X 42", 8" sw. over crosslide, 1-9/16" spndl. hole, S/N N/A. KINGSTON 21" X 157", Mdl. HL4000, 14" sw. over crosslide, spds.: 37–1,500 RPM, 3-1/8" spndl. hole, taper attach., (3) MFC 14" X 40" GAP BED TYPE, spds.: 105–2,000 RPM, 1-1/2" steadyrests, 10 HP drive motor, inch/metric thdng., S/N 18670222. spndl. hole, cabinet base, S/N N.A. MASTER TURN 21" X 80" GAP BED TYPE, 14" sw. over crosslide, MONARCH 10" X 20" PRECISION, Mdl. 10EE, retrofitted w/ 3-1/8" spndl. hole, spds.: 20–2,000 RPM, inch/metric thdng., taper Baldor variable spd. drive system, taper attach., spds. to 2,500 attach., steadyrests, followrest, S/N 21890070409. RPM, lever collet closer, S/N EE25882.

KINGSTON 21" X 157" ENGINE LATHE 21" X 80" MASTER TURN ENGINE LATHE 17" X 80" COLCHESTER ENGINE LATHE 6 7 2005

DOALL 36" VERTICAL BANDSAW DOALL SEMI AUTOMATIC HORIZONTAL BANDSAW

CNC BEHRINGER CNC HORIZONTAL BANDSAW

CNC AUTOMATIC HORIZONTAL BANDSAW PUMP PARTS BEHRINGER MDL. HBP303A, new 2005, CNC programmable LARGE QUANTITY PARTS FOR CENTRIFUGAL PUMPS infeed control, 11.81" x 11.81" capacity, chip conveyor, infeed roller INCLUDING SEGMENT GEARS; PUMP HOUSINGS; conveyor, auto. hyd. bundle clamp, approx. 24" max. infeed stroke, SHAVES; IMPELLERS; ASSORTED PIECE PARTS. S/N 105631. MISCELLANEOUS MACHINERY SADDLE TYPE TURRET LATHE FOSDICK 4' X 13" RADIAL ARM DRILL, L-base, spds.: 17– WARNER & SWASEY MDL. 3A, Mdl. M3500, 23-1/2" swing over 1,800 RPM, pwr. clamping, pwr. feeds, tap leads, tilting and plain bed, 198" swing over carriage, 43" max. turning lgth., 4-1/2" spndl. box tables, S/N 16169; LUCIFER MDL. LI7-K24 HEAT TREAT hole, spds.: 12–851 RPM, crossliding turret, lead-on thdng. to turret, FURNACE, dims: 12" x 12" x 24" dp., elec. fired, 2,200 deg. F. 20" dia. 4-jaw independent chuck, 40/20 HP motor, S/N 1932414. max. temp., 10.5 kW, S/N 5433; RED ARROW TOW BAR MFG. CO. H-FRAME ARBOR PRESS, 30 T. OTC cylinder, approx. BANDSAWS 30" dist. btn. uprights; EXCELLO MDL. 25 RAM TYPE EDM DoALL MDL. C-1213M SEMI-AUTOMATIC HORIZONTAL, 1-1/2" MACHINE, 25 amp, 21" x 13-1/2" x 12" dp. tank, S/N N.A.; dia. blade, 12" x 13" cap., roller conveyor, exit tray, S/N 413-91282. ELECTRO-ARC TAP DISINTEGRATOR; SEVERAL PEDES- TAL DRILL PRESSES; SEVERAL DOUBLE END PEDESTAL JOHNSON 6" HORIZONTAL BANDSAW, Mdl. B, roller stand, S/N GRINDERS; MASTER 24" DUAL SPINDLE DISC SANDER w/ B-4851. tilting tables; WYSONG 3' X 10 GA. MECHANICAL SHEAR, DoALL 36" VERTICAL, Mdl. 36-12H, 36" throat depth, hyd. table S/N 9-116; FOSDICK 4-SPINDLE GANG DRILL, production feed, blade welder and grinder, S/N 272-7521. table, pwr. feed on (2) spndls.; RIDGID MDL. 535 PIPE THREADER w/multiple self-opening die heads; HORIZONTAL POWERMATIC MDL. 143 WOOD CUTTING, 16" throat depth, S/N DRILL RIG w/Milwaukee 3/4" H.D. elec. drill; DELTA 543328. ROCKWELL 6" BELT/12" DISC SANDER; 28" ROCKFORD 12" ROLL-IN VERTICAL, w/rolling frame. PLAIN HYDRAULIC SHAPER.

20" X 54" LODGE & SHIPLEY ENGINE LATHE FOSDICK RADIAL ARM DRILL MONARCH 10EE PRECISION LATHE 6 7 1997

BLANCHARD MDL. 26HD-48 VERTICAL 12" X 24" CHEVALIER AUTOMATIC MITTS & MERRILL #3 HYDRAULIC ROTARY SURFACE GRINDER SURFACE GRINDER KEYSEATER

VERTICAL ROTARY SURFACE GRINDER MISCELLANEOUS GRINDERS BLANCHARD MDL. 26H-D-48, 48" dia. magnetic chuck, 56" sw. CINCINNATI MILACRON #2 TOOL AND CUTTER, 6" x 43" work ta- inside guards, 36" height under new segments, 26" segmented wheel, ble, tilt spndl., motorized workhead, many accessories, S/N F5 75 HP H.D. grinding head, table spds.: 6–33 RPM, coolant system, 514-E-80-09-15. S/N 15098. K.O. LEE MDL. B2060H TOOL AND CUTTER, hyd. table drive, motorized work head w/variable spd. controls, S/N 10935-967. SURFACE GRINDERS NORTON TOOL AND CUTTER, 5-1/2" x 36" table, swivel work head, CHEVALIER 12" X 24" AUTOMATIC HYDRAULIC, new 1996, Mdl. hob grinding fixture, motorized work head, cast iron base, S/N 6842. FFG1224AD, fully auto. cycle controls w/digital downfeed, 2-axis D.R.O., magnetic coolant filtration system, 14" x 2" wheel, electromagnetic UNISON DEDTRU MDL. C CENTERLESS GRINDER, variable spd. chuck, variable control, S/N F1827004. regulating wheel set, 2-1/2"W. grinding wheel, 1 HP direct drive, coolant system, S/N 2800. HARIG 6" X 18" HYDRAULIC, 1 HP direct drive spndl., 2-axis hyd. mo- tion, S/N 5470. OLIVER MDL. 600 DRILL GRINDER, 1/2" to 3" cap., auto. cycle controls, S/N G8795. HARIG 6" X 12" HAND FEED, Mdl. SUPER 612, 1 HP direct drive spndl., 6" x 12" perm. magnetic chuck, cabinet base, S/N 13627. BLACK DIAMOND DRILL GRINDER, 1/3 HP motor, cabinet base. ROCKWELL CARBIDE GRINDER w/tilting tables. CYLINDRICAL GRINDERS NORTON 10" X 96" PLAIN, Mdl. C5, auto. infeed, plunge grinding HONING MACHINES attach., 30" x 2" wheel size, 15 HP wheel drive motor, S/N 28231. SUNNEN MDL. MBB1650, cabinet base, oil filtration system, large CINCINNATI 10" X 24" UNIVERSAL, swing down internal grinding qty. of Sunnen honing mandrels and stones, S/N 51718. attach., swivel work head, swivel wheel head, live/dead work head, 2 SUNNEN MDL. MB625D, S/N 10758. pt. steadyrests, S/N 4U2B5HN-3. HORIZONTAL HYDRAULIC SLOTTER & KEYSEATERS MITTS & MERRILL MDL. 3AHYDKS HYDRAULIC, large qty. of arbors, BROACHING MACHINE T-cutters and bushings, S/N KM626. OILGEAR APPROX. 30 T. CAP., 84" stroke, broach retriever, 25 HP external hyd. system, S/N 6425. DAVIS MDL. #5 MECHANICAL. PRATT & WHITNEY MDL. B VERTICAL SLOTTER, 12" stroke, 24" built-in rotary table, S/N 473.

OILGEAR HORIZONTAL HYDRAULIC BROACHING MACHINE

OLIVER MDL. 600 DRILL GRINDER SUNNEN HONING MACHINE 10" X 96" NORTON PLAIN CYLINDRICAL GRINDER 8 9 ROTARY TABLES & ANGLE PLATES 48" SQ. GIDDINGS & LEWIS ROTARY TABLE; 36" SQ. GIDDINGS & LEWIS ROTARY TABLE; 30" PRATT & WHITNEY MOTORIZED ROTARY TABLE; 24" TROYKE ROTARY TABLE; PORTAGE 24"W. X 36" HT. X 28" DP. CAST IRON ANGLE PLATE; TOMB- STONE 28"W. X 12" DP. X 36" HT. FABRICATED IRON 20"W. X 20" HT. X 20" DP. ANGLE PLATE; FABRICATED STEEL 36"W. X 36" HT. X 24" DP. ANGLE PLATE.

MACHINE SHOP ACCESSORIES ROTARY TABLES & VISES (4) BRIDGEPORT RIGHT ANGLE MILLING ATTACHMENTS; (2) BRIDGEPORT QUILLMASTER MILLING ATTACHMENTS; 4" X 6" MAGNETIC RISER BLOCK; 5C COLLET INDEXER; ENCO R8 TAPER 3" BORING HEAD; CAT-40 TAPER BORING HEAD; VIEW OF ROTARY TABLES MAREX 4-7/8" BORING SET w/extension holders and boring tools (in wooden case); WOLHAUPTER MDL. VHU 3-1/8"BORING HEAD w/accessories; LATHE TOOL GRINDING ATTACH- MENT; (2) BRIDGEPORT ADJUSTABLE BORING HEADS; CHANDLER DUPLEX CONTINUOUS FEED BORING HEAD; WOLHAUPTER H.D. MORSE TAPER AND #50 TAPER BORING HEADS, up to 12" cap.; R8 COLLETS; 5C COLLETS; SPRING COLLETS; 22J COLLETS; DOZENS OF JACOBS DRILL ASSORTED BORING HEADS CHUCKS; LIVE CENTERS; ALORIS TOOLPOST AND HOLDERS OF ALL SIZES; 12" X 12" DRILLED AND TAPPED SINE PLATE; APPROX. (10) ROTARY TABLES from 8" to 12" cap. by Troyke & HUGE ASSORTMENT OF Bridgeport; (12) 6" KURT MILLING VISES; YUASA AND L&W CARBIDE INSERTS VERTICAL INDEXERS; (2) 8" KURT MILLING VISES. CUTTING TOOLS WIDE RANGE AND HUGE SELECTION OF CUTTING TOOLS INCLUDING: THOUSANDS OF TAPER SHANK DRILLS UP TO 3-1/2" DIAMETER; HUNDREDS OF INDEXABLE BORING BARS AND TURNING TOOLS; THOUSANDS OF CARBIDE INSERTS; REAMERS OF ALL DESCRIPTION; BORING TOOLS; COUNTERSINKS; PILOT DRILLS; CORNER ROUNDING END MILLS; SINGLE- AND DOUBLE-END END MILLS; KEYWAY AND < WOODRUFF CUTTERS; LARGE ASSORTMENT OF MITTS & PARTIAL VIEW MERRILL BROACH TOOLING AND BUSHINGS ; SUNNEN HONING OF CUTTING EQUIPMENT, HUNDREDS OF MILLING CUTTERS, GEAR HOBS, TOOLS & INVOLUTE CUTTERS, AND MUCH, MUCH MORE! SUPPLIES

< WIDE SELECTION HAND TOOLS OF POWER TOOLS IMPACT SOCKETS, from up to 1" to 3-1/2" dia. w/extensions; TORQUE WRENCHES; 3/4" DRIVE SOCKET SETS; MULTIPLE 1/4" DRIVE SOCKET SETS BY CRAFTSMAN, PROTO, CHINA AND ARMSTRONG; CHAIN BINDERS; STRIKING WRENCHES, up to 3" dia.; HYTORC 1-1/2" DRIVE SOCKET WRENCH; HYTORC 1" DRIVE SOCKET WRENCH; HYTORC INTERNAL SPLINE SOCKET WRENCH w/2" spline; HYTORC HYD. POWER UNIT; LARGE SELECTION OF GEAR AND BEARING PULLERS; CHAIN WRENCHES; PIPE WRENCHES, up to 36" aluminum rigid; WIDE SELECTION OF RIDGID THREADING TOOLS, including power threader head; ENERPAC HYDRAULIC JACK, up to 100 T. cap. w/ manual and elec. pwr. supply units; CHAIN BINDERS; CUTTING TORCHES; ROSEBUD HEATING TORCHES; OXY./ACY. TORCH OUTFITS w/bottle carts, hoses, regulators and cutting heads. WELDERS & ACCESSORIES > PARTIAL VIEW OF MILLER MDL. SYNCROWAVE 351 TIG, 350 amp 34 v. rated output, WELDING MACHINES 40% duty cycle, digital amperage and volt readouts, S/N KB519851; & ACCESSORIES MILLER MDL. 33A/BP TIG, S/N JA360084; (2) AIRCO MDL. CB450 MIG, 450 amp @ 38 v. rated output, 100% duty cycle, variable spd. wire feed unit, roller cart base, S/N’s N.A; LINCOLN MDL. POWER MIG POWER TOOLS 255 INTEGRATED, portable cart, built-in wire feeder, S/N U1991006071; RIGHT ANGLE GRINDERS; PNEUMATIC RIGHT ANGLE GRIND- MILLER MDL. DIALARC HF DC ARC WELDER, 250 amp @ 30 v. ERS BY INGERSOLL; AERO CHIPPING HAMMERS; SIOUX, rated output, 40% duty cycle, S/N HH034970; GENERAL ELECTRIC INGERSOLL-RAND AND CLECO IMPACT WRENCHES, up to 1" 200 AMP MOTOR/GENERATOR TYPE ARC WELDER; drive; (2) CHICAGO PNEUMATIC 1" DRIVE IMPACT WRENCHES; HYPERTHERM MDL. MAX100 PLASMA CUTTING UNIT, roller cart WIDE SELECTION OF ELECTRIC DRILLS, up to 3/8" cap.; PNEU- base, plasma torch, 100 amp output, S/N 70-4502; JETLINE 100 LB. MATIC CHIPPING HAMMERS; PNEUMATIC NEEDLE SCALERS; CAP. PORTABLE WELDING POSITIONER, foot pedal control; BLUE STRAIGHT SHANK ELECTRIC GRINDERS; RIGHT ANGLE ELECTRIC M WELDING ROD OVEN, roller base, digital controls; WELDING GRINDERS; (6) MAGNETIC BASE DRILLS; (2) BX SCRAPERS w/ RODS; TIG WIRES; WIRE SPOOLS; WELDING GLOVES; accessories and boxes; MILWAUKEE SAWZALL; (3) MILWAUKEE WELDING SHIELDS; LEADS; GUNS; AND MUCH, MUCH MORE. PORTABLE BANDSAWS.

8 9 STARRETT 30" OPTICAL HARDNESS TESTERS & EQUIPMENT HOFFMAN BALANCING MACHINE COMPARATOR

OPTICAL COMPARATORS PRECISION INSTRUMENTS STARRETT SIGMA MDL. HF750, 31" screen, HUGE ASSORTMENT OF PRECISION MEASURING EQUIPMENT INCLUDING: 24-3/4" x 9-1/8" work table, S/N 7098. VERNIER CALIPERS, up to 72"; MICROMETERS, up to 36"; STARRETT & FOWLER 1"–12" MICROMETER SETS; GAGE BLOCKS; END MEASURING SETS; DEPTH GAGEMASTER MDL. GM4, 14" screen, 14-5/8" AND THREAD MICROMETERS; DIAL INDICATORS; HEIGHT GAGES; HEIGHT x 4" work table, S/N A00914. MASTERS; ROCKWELL HARDNESS TESTERS; HARDENED AND GROUND PLUG AND RING GAGES; PIN GAGES; BORE GAGES; CHAMFER GAGES; ADJUSTABLE BALANCING MACHINE PARALLELS; COMPARATOR STANDS; PRECISION AIR COLUMN GAGES; PRATT HOFFMAN MDL. HL400.1, 8.8 lb. to 880 lb. & WHITNEY SUPER MICROMETER; DIGITAL LEVELLING SYSTEM; ELECTRICAL weight cap., 40" swing, 92" cc, 5 HP belt drive TEST EQUIPMENT; BALANCING AND VIBRATION METERS; SEVERAL LARGE system, polar graphics control. GRADE “A” PRECISON GRANITE SURFACE PLATES.

PLANT & MACHINERY INC. APPRAISAL DIVISION Confidential Industrial Machinery & Equipment Appraisals Call Ron Braman at 1-800-282-8466

TREMENDOUS SELECTION OF PRECISION INSTRUMENTS

10 11 2002

HYSTER 12,000 LB. CAP. FORKLIFT HYSTER 10,000 LB. CAP. FORKLIFT HYSTER ELECTRIC FORKLIFT

AUCTION 2002 THURSDAY, DECEMBER 4 • 10:00 A.M. Former Assets of BURNEY GEAR CO. 6702 Linwood Avenue < HYSTER SHREVEPORT, LOUISIANA 71106 4,500 LB. CAP. (See Directions on Back Page) FORKLIFT

FORKLIFTS MATERIAL HANDLING EQUIPMENT HYSTER 12,000 LB. CAP. MDL. S120XMPRS, new 2002, LPG, 90" 2 T. CAP. ROLLING GANTRY FRAME, Jet 2 T. cap. elec. hoist, triple stage mast, 185" lift height, cushion tires, 42" forks, S/N adj. height, approx. 14'L. beam; BARREL DOLLIES; HAND E004V02309Z. TRUCKS; CARTS; TABLES; SHELVING; 2-DOOR CABI- HYSTER MDL. H110XL, LP pwrd., 11,000 lb. cap. @ 30" load center, NETS; H.D. STEEL WORKBENCHES; BUDGIT 2 T. CAP. 160" max. lift, dual front pneu. tires, 48" forks, S/N F005A04561H. ELECTRIC CHAIN; DEMAG 2 T. CAP. ELECTRIC CHAIN HOIST, w/pendant control; SEVERAL MANUAL CHAIN HYSTER MDL. S100B, LP pwrd., 10,000 lb. cap. @ 24" load center, FALLS, SELF-DUMPING CHIP HOPPERS. side shifter, Monitrol trans., wide foot print cushion tires, 60" forks, S/N N.A. PICKUP TRUCKS HYSTER 6,000 LB. CAP. MDL. H60XM, new 1996, LPG, 83" triple DODGE RAM MDL. 3500 1 TON FLATBED, new 1999, Cum- stage mast, 177" lift height, pneumatic tires, side shift, 42" forks, S/N mins 24 valve 6 cyl. turbo diesel engine, auto. trans., dual rear D177B00823T. wheels, air cond., AM/FM radio, odo: 221,253 miles, LA Lic. Plate B386419, VIN 386MC3661XM519608. HYSTER MDL. H50H, LP pwrd. 5,500 lb. cap. @ 24" load center, 4'L. forks, rough terrain tires, S/N D3D2977T. DODGE RAM MDL. LARAMIE 2500 3/4 TON, new 1996, Cummins 6 cyl. inline turbo diesel engine, auto. trans., air cond., HYSTER MDL. E40B, electric pwrd., 5,000 lb. cap. @ 24" load cen- AM/FM radio, LA Lic. Plate B366433, VIN 1B7KC23LX- ter, 130" max. lift, 4'L. forks, cushion tires, 36 Volt, w/charger system, TJ199767. S/N B108V06896B. TOYOTA TUNDRA, new 2001, V-6 gasoline engine, 5-spd. HYSTER 4,500 LB. CAP. MDL. S45XL, new 2002, LPG, 83” 4-stage manual trans., air cond., AM/FM radio, odo: 10,989 miles, LA mast, 240" lift height, cushion tires, fork squeeze, 42" forks, S/N Lic. Plate W03095, VIN 5TBJN321025234290. D187V26865Z. YALE 4,000 LB. CAP. MDL. GLC040AFNUAV058, new 2000, LPG, UTILITY TRAILER 58" standard mast, 83" lift height, cushion tires, side shifter, 42" CUSTOM, 14'-3"L. x 91"W. bed, tandem wheels, LA Lic. Plate forks, S/N A809NX09791X. E104711.

PARTIAL VIEW OF MATERIAL HANDLING DODGE 1-TON FLATBED TRUCK DODGE RAM 2500 PICKUP TRUCK 10 11 Presorted PUBLIC INVITED First Class Mail P.O. Box 19100 U.S. Postage PAID Houston, TX 77224-9100 THURSDAY, DECEMBER 4 • 10:00 A.M. Eugene, Oregon Permit No. 305 DATED MATERIAL – PLEASE DELIVER

OUTSTANDING GEAR & PUMP REPAIR FACILITY! ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Featuring: Gear Hobbers to 72", Vertical & Horizontal Boring Mills, Large Capacity CNC Lathes, Vertical & Horizontal Machining Centers, Wide Range of High Quality Support Machinery, Huge Quantities of Tooling & Measuring Equipment, Material Handling Equipment, Vehicles, & Much, Much More! AUCTION

SHREVEPORT, LOUISIANA

DIRECTIONS PROXY BIDS UNABLE TO ATTEND? If you cannot attend this sale we will bid on your behalf. Contact Bid on-line in real time at FROM SHREVEPORT AIRPORT: Exit airport using Houston office at (713) 691-4401 for instructions, or go to our TO PARTICIPATE YOU MUST: Monkhouse Dr./Claude Hamel Dr. Turn right on website at www.pmi-auction.com. Hollywood Ave. and proceed approximately 3.7 miles. 1. Register at www.BidSpotter.com. DO IT NOW. Turn right on Linwood Ave. and proceed approximately 2. Either wire transfer, or mail a cashier’s check deposit in .8 mile to auction site, 6702 Linwood Ave. Auction site ARE YOU SELLING YOUR PLANT? the amount of $3,000 to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX is on the right hand side. Watch for auction signs. CALL 1-800-282-8466 77224-9100. LODGING FOR A CONFIDENTIAL If you are using FedEx or another delivery service: CONSULTATION 2901 W. Sam Houston Pkwy. N., Suite A-130, Comfort Inn...... (318) 688-2812 Houston, TX 77043, (713) 691-4401. 9420 Healthplex Drive, Shreveport, Louisiana You must be registered and have your deposit in the hands of PLANT & MACHINERY INC. Plant & Machinery, Inc. at least 24 hours prior to the start Clarion Hotel...... (318) 797-9900 of the auction. Failure to register and/or failure to send your 1419 East 70th Street, Shreveport, Louisiana APPRAISAL DIVISION deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT. Confidential Industrial Machinery & Equipment Appraisals Holiday Inn Express...... (318) 629-0163 If you need assistance, don’t hesitate to call (713) 691-4401. 8751 Park Plaza, Shreveport, Louisiana Call 1-800-282-8466 ALL ON-LINE BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM. TERMS & CONDITIONS A 12% Buyer’s Premium Will Apply On-Site. Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE A 15% Buyer’s Premium Will Apply On-Line. AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POS- Customary Terms of Sale, copies of which will be posted on the premises. SIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless form CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evi- Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. dence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and $ . This letter is good until January 5, 2009. group lots as it may deem appropriate. In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all Although all information has been obtained from sources deemed reliable, the auctioneer and seller other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein damages. All items must be removed by the time announced at the start of the sale. contained, or contained in our catalog. It is for this reason that buyers should avail themselves of Lots not paid for and/or removed within the time allowed may be resold at public or private sale the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are without further notice, and any deficiency, together with all expenses and charge of resale, will be subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. charged to the defaulting purchaser. These terms and conditions may be modified or supplemented by language in the catalog available The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be at the sale site or by announcement at the start of the sale. Bidders should be attentive to those bidding and/or does purchase. announcements and to the catalog language.

IP-8214530