WOOD VENEER DOORS

www.richelieu.com Wood Veneer doors

MODELS

Square RADIUS 3.5” 3000 3180 3/16” 4 edges 4 edges 7/8” 3/4” Solid wood edge 11/16” Solid wood edge 2,0 mm 2,0 mm

*Vertical grain only

3190 RADIUS 5/8” 3150 ANGLE 11° 3/16”

2 edges Solid wood edge 4 edges 7/8” 3/4” 5/8” Solid wood edge 2,0 mm 11/16” 2,0 mm

NEW

Door with vertical edge banding

2000 Square 3125 RADIUS 1/16” 4 edges 2 vertical 3/4” 11/16” Solid wood edge Wood edge edges 2,0 mm 0,6 mm

All models are available in each of our wide selection of veneers. By default, the wood grain appears vertically on doors and drawer fronts. Please specify if you want the wood grain to be set horizontally. For some models, you must indicate the grain orientation. Otherwise, it will automatically be vertical (top to bottom). Please refer to our technical drawing (page 5).

Our products have excellent stability, with a warping tolerance of 1/16”. This tolerance applies only to door sizes not exceeding 24” wide and 48” high.

We consider our sanding preparation ready for finishing. However, we still recommend a light hand sanding of all parts in order to meet your level of perfection.

2 Wood Veneer doors

COMPLEMEntaRY PRODUCtS Frame Door Our frame door is available in all models, regardless of the veneer species.

Profile depends on 1/2” the model

Back 3/8” Glass thickness Oven Panels 3 or 4 mm Our oven panels have one or more openings. Solid wood edge You must specify all measurements prior to fabrication. Front

2-1/2” Standard B1

Microwave oven H front panel

A1 A2 Special Panels Our specialty panels, manufactured in the size of your choice, have one or more square edges (not machined), edgebanded or not. They are suitable as doors on a corner module B2 (Lazy Susan), as end panels, fi llers, etc. When ordering, please indicate which edges should be square and whether they should be edgebanded or not. Veneer sheets, edge banding, L and different types of panels are also available. Please see our price list.

B1

C

B3

A1 A2 Standard oven and microwave oven front panel H

Square edge (without machining) edgebanded or not, on 1, 2 or 3 sides

B2 Light Shields Light shields are available in lengths of 96”x 3”. They are shaped on one edge only and are available in all our door models.

On special order, edge banding can also be applied Please note that nature creates, but cannot reproduce. To avoid variations of shades to the inner contour of a panel for an oven and / or and colors between your doors and panels, we recommend that you order all your microwave. It is subject to a surcharge. components at the same time. They will then be matched to each other.

3 Wood Veneer doors

available veneers Engineered Wood Veneers Real Wood Veneers - ExotiC sPeCies

Mahogany QC Cherry QC White Oak RF Anigre Figured Caramel Bamboo QC

Walnut QC Teak QC Wenge QC Zebrawood QC Teak QC

Macassar Ebony QC Maple QC Birdseye Maple FC Natural Bamboo QC

Key cuts FC: Flat Cut QC: Quarter Cut RC: Rotary Cut RF: Rift Cut

Rosewood FC Zebrawood QC

4 Wood Veneer doors

Real Wood Veneers - CoMMon sPeCies

Cherry QC Cherry FC White Oak QC Red Oak QC Red Oak FC

Maple QC Maple RC Maple FC Walnut QC Walnut FC

Each type of wood has its own characteristics. Some react poorly to dyes, others show significant color changes with age or have a wide range of grain or color, all of which require a good knowledge of the species in order to extract its maximum effect. We recommend that you make your own tests on your chosen materials.

TYPES OF SEQUENCING The manufacturing of our doors can be done in two ways, either sequenced or not. Our doors and drawer fronts have a standard vertical grain. If you need products with horizontal grain, please indicate so when ordering.

Non-sequenced method The production of doors is done randomly. That is, they will be fabricated at random and each one will display its own characteristics Birch RC (graining, shades, etc.). This method is the standard method of production in the industry.

Sequenced method The production of doors takes into account the exact position of each door relative to the next; each door becomes a visual extension of adja- cent doors. This method results in a harmonious look for the entire work (send your drawing of the requested sequence). A surcharge for this method applies. Note that this method does not apply to our HD Evolution collection. Ash FC

5 CUStOM-bUiLt DOORS WEB MODULE www.richelieu.com

Visit us online at www.richelieu.com and try our fast and easy step-by-step module within our cabinet doors section, that lets you create your own custom doors according to your specifi cations!

Only a few clicks are required to view and order your own designs. We have infi nite possibilities!

CanaDa UnitED StatES tel.: 1 800 361-6000 tel.: 1 800 619-5446 Fax: 1 800 363-0193 Fax: 1 800 876-7454 ALBERTA NOVA SCOTIA QUÉBEC CONNECTICUT GEORGIA NEW YORK Calgary Halifax Laval Hartford Atlanta New York Edmonton Montréal Savannah Syracuse Québec ONTARIO FLORIDA ILLINOIS BRITISH COLUMBIA Barrie Dania Beach Chicago NORTH CAROLINA Kelowna Kitchener SASKATCHEWAN Hialeah Charlotte Vancouver Mississauga Regina Jacksonville INDIANA Greensboro Victoria Ottawa Saskatoon Orlando Indianapolis Raleigh Sudbury Pompano Beach KENTUCKY Thunder Bay Riviera Beach MANITOBA Louisville OHIO Winnipeg Toronto Sarasota Cincinnati Tampa MASSACHUSETTS NEW BRUNSWICK Boston SOUTH Moncton MICHIGAN CAROLINA Detroit Greenville édition 10-2014

NEWFOUNDLAND rd St. John’s NEW JERSEY TENNESSEE Avenel Nashville Lincoln Park WASHINGTON WVDOOREN 3 Seattle Printed in Canada 2$

7