DOCSLIB.ORG

A Buyers Guide to Wood Products 2018

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A Buyers Guide to Wood Products 2018 QUALITY FROM FINLAND – WOODPRODUCTS.FI A BUYER’S GUIDE TO WOOD PRODUCTS AN ECOLOGICALLY SUSTAINABLE CHOICE Wood is a renewable material. Finland’s sustainably managed for- ests produce considerably more good-quality wood than is used. Annual forest growth is roughly 109,9 million cubic metres, about half of which is used. The limit for sustainable felling is about 70 million cubic metres. When you buy Finnish wood products, you can be sure of the sustainability of your choice. Finnish forest industry companies only use legally acquired wood in their pro- duction. The companies know the origin of the wood. Knowing the origin of the raw material is a prerequisite for the sustainable use of forests. The conservation rate of Finnish forests is unsurpassed in Europe. Finland strictly protects 2,7 million hectares of forest, equivalent to 12 % of its total area of forests. The forest industry supports the use of impartial and widely approved international certification systems. Forest certification can ensure that the fun- damentals for sustainable forest use are in place, and that inter- national comparability is preserved. Of Finland’s commercial forests, more than 95 % is subject to third-party forest certification. Correspondingly, less than 10 % of forests in the rest of the world are certified. THE CARBON FOOTPRINT OF BUILDING PRODUCTS 4000 3000 2000 SKILFUL FINLAND 1000 THE USE OF WOOD MITIGATES CLIMATE CHANGE Finland is known for its top-level expertise, excellent Particle board board (OSB) Strand Conifer plywood Sawn timber CLT timber Glued laminated board Plaster-carton Siporex Aluminium steel Stainless Copper Leca block Concrete educational system and forests. Finland is a pioneer of 0 • The use of wood precipitates forest renewal. Growing the forest-based bioeconomy, and it produces a di- forests bind more carbon dioxide than a fully grown verse range of sustainable solutions from wood. Finn- -1000 forest. ish people are renowned as responsible and reliable • The consumption of energy and natural resources partners who honour the contracts that they make. It’s and CO₂ emissions caused by the manufacture of -2000 easy to do business with Finns. wood products are less than manufacturing using other materials. In fact, in the production of sawn CO₂e g/kg stored CO₂ g/kg and planed products, more energy is created than FINNISH WOOD PRODUCTS Source: VTT Technical Research Centre of Finland, €CO project 2 consumed. The Finnish wood industry manufactures • Wood is a carbon store as it sequesters CO₂ from the and markets high-quality wood products air as it grows. One cubic metre of wood absorbs for the global market. The manufacture about one tonne of carbon dioxide. In long-lasting of wood products has long traditions. The wood products, carbon is stored in the wood for a choice of products is extensive, from sawn long period of time. timber to engineered products, interior de- • Wood can be used to replace materials whose sign products, and furniture from top-class manufacture is harmful to the environment. designers. • At the end of their life cycle, wood products can be Common to all manufacturers are ex- used to produce renewable energy and so replace tensive knowledge of wood as a material, fossil fuels. The amount of CO₂ released when the utilisation of modern technology and burning wood is equal to the amount that it has high-quality raw material, which is obtained sequestered during its growth. from sustainably managed forests. The • Neither wood nor the products produced from its products are tailored to the requirements elements generate hazardous waste. of the customer. 2 QUALITY FROM FINLAND – WOODPRODUCTS.FI A BUYER’S GUIDE TO WOOD PRODUCTS 3 STRONG WOOD FROM THE NORTHERN CONIFEROUS FOREST BELT IN THE COLD, WOOD GROWS SLOWLY TECHNICAL PROPERTIES OF A NORDIC CONIFER Finland is one of the best areas in the world for tree growth. COMPARED TO NORTH AMERICAN AND JAPANESE SPECIES OF TREE It belongs to the cold climatic belt in which sub-zero winters alternate with warm summers. The summer season lasts only SPECIES COMPRESSION TENSIONAL BENDING MODULUS BREAKING DENSITY 100 days, during which the trees grow. The short growing sea- STRENGTH STRENGTH STRENGTH OF STRENGTH ELASTICITY son means slow growth, which may take 60-120 years. along the against the along the Commercial/scientific name grain grain grain N/mm2 N/mm2 N/mm2 kg/m3 THE RESULT – STRAIGHT-GRAINED, N/mm2 N/mm2 N/mm2 TOUGH TIMBER WITH FEW KNOTS FINNISH This slow growth provides the best possible timber: there are Spruce / Picea abies 39 5,3 116 87 10.000 6,8 470 few knots, and they are small. Growth is symmetrical and the Pine / Pinus sylvestris 50 7,0 95 91 10.900 9,1 540 trunks are straight and round. Growth rings are thin and tight- NORTH AMERICA ly-packed. The proportion of juvenile wood is small and that Douglas Fir / Pseudotsuga menziesii 43 5,9 95 66 11.300 7,2 520 of heartwood great. The result is a hard, tough and straight- grained timber with low tension and few internal cracks. Coast Redwood / Sequoia sempervirens 30 4,1 70 50 6.800 6,8 430 Low-resin, evenly patterned Finnish wood is first-class material Western hemlock / Tsuga heterophylla 44 5,2 69 79 10.500 8,2 480 for many applications. Longleaf pine / Pinus palustris 59 6,9 105 78 10.900 9,8 680 European larch / Larix decidua 50 6,5 97 90 12.500 8,2 470 JAPANESE Japanese cedar / Cryptomeria japonica 35 90 65 7.500 6,0 380 Japanese cypress / Chamaecyparis obtusa 40 120 75 9.000 7,5 440 Japanese red pine / Pinus densiflora 45 140 90 11.500 9,5 520 Japanese black pine / Pinus thunbergii 45 140 85 10.500 9,0 540 Japanese white pine / Pinus parviflora 35 80 70 7.000 8,0 450 The values for strength and elasticity are averages and based on measurements of flawless test pieces in 12 % humidity. They are not intended to be used as design values, for which values given in national standards must be used. 4 QUALITY FROM FINLAND – WOODPRODUCTS.FI A BUYER’S GUIDE TO WOOD PRODUCTS 5 GRADES, NAMES AND DIMENSIONS OF SAWN TIMBER Pine (commercially known as redwood) SAWN TIMBER GRADES and spruce (commercially known as whitewood) are sawn, dried and sorted US V VI VII according to technical standards, mois- US I US II US III US IV ture content and dimensions. COMMON CROSS-SECTIONAL DIMENSIONS MAIN GRADES Sawn timber • The main grades are US, V, VI and VII. Thickness Width (mm) • US is the highest production grade, and (mm) 50 75 100 125 150 175 200 225 250 it is subdivided into sub-grades US I to 1) US IV, of which US I is the highest. 19 • Production grades V and VI have no sub- 22 2) JH JH grades. 25 1) • Grade VII has no numerical values. All SPRUCE, US SPRUCE, V SPRUCE, VI SPRUCE, VII 32 wood properties are allowed, but the sawn timber piece must remain in one 38 piece. The saw blade must touch the 44 2) majority of the timber piece’s surfaces, 50 JH but a piece where one third of its 63 length is untouched by the blade is still 75 JH acceptable. 100 DIMENSIONED SAWN TIMBER means 125 sawn timber, which is rough-planed to a 150 precise measurement. Sawn timber is di- 1) usually pine mensioned by planing about 1 mm from all 2) usually spruce sides at a rapid feeding speed. The result JH = usually done by splitting afterwards, whereby the width is 2 mm less that the nominal size of the planning is rough and the product = standard size = rarely produced size might exhibit unplaned areas and ridges. Dimensioned sawn timber is typically avail- Dimensioned sawn timber able in lengths between 2.7 and 5.4 m, at PINE, US PINE, V PINE, VI PINE, VII Thickness Width (mm) 300 mm intervals. (mm) 48 66 73 95 98 120 123 145 148 173 198 223 248 PLANED SAWN TIMBER means all-round 20 1) planed sawn timber in the shape of a rec- 42 PERMITTED DIMENSIONAL DEVIATIONS tangle. In the planing of sawn timber, at 48 least 2 mm is planed from all sides. The The maximum permitted dimensional deviations from nominal sizes for sawn timber are shown in the following tables: 1) finely-sawn surface surface should be smooth and there should = standard size = rarely produced size be no sawing roughness or ridges. Planed Sawn-surface sawn timber All-round planed sawn timber sawn timber is typically available in lengths All-round planed sawn timber Dimension Dimensional deviation Dimension Dimensional deviation between 2.7 and 5.4 m, at 300 mm intervals. Thickness Width (mm) Thickness and width ≤ 100 mm - 1,0 … + 3,0 mm Thickness ≤ 20 mm ± 0,5 mm (mm) 1) STANDARD SIZES: 15 21 28 33 45 70 95 120 145 170 195 Thickness and width > 100 mm - 2,0 … + 4,0 mm Thickness > 20 mm ± 1,0 mm 8 Length 1800...6000 mm - 0 … + 50 mm Length ≤ 100 mm ± 1,0 mm THICKNESSES, WIDTHS AND LENGTHS 12 Length when cut to the specified size ± 2,0 mm Length > 100 mm ± 1,5 mm Dimensions mean nominal sizes when the 15 1) Length when sorted moisture content of the sawn timber is - 25 … + 50 mm Dimensioned sawn timber according to length 20 %. 18 2) Length when cut The most common lengths vary be- 21 1) Dimension Dimensional deviation ± 2,0 mm to the specified size tween 2.7 m and 6.0 m in steps of 300 mm.
Load more

Recommended publications
  • Use of Wood Residue in Making Reconstituted Board Products
    University of Montana ScholarWorks at University of Montana Graduate Student Theses, Dissertations, & Professional Papers Graduate School 1959 Use of wood residue in making reconstituted board products Suthi Harnsongkram The University of Montana Follow this and additional works at: https://scholarworks.umt.edu/etd Let us know how access to this document benefits ou.y Recommended Citation Harnsongkram, Suthi, "Use of wood residue in making reconstituted board products" (1959). Graduate Student Theses, Dissertations, & Professional Papers. 3981. https://scholarworks.umt.edu/etd/3981 This Thesis is brought to you for free and open access by the Graduate School at ScholarWorks at University of Montana. It has been accepted for inclusion in Graduate Student Theses, Dissertations, & Professional Papers by an authorized administrator of ScholarWorks at University of Montana. For more information, please contact [email protected]. THE USE OF WOOD RESIDUE IN MAKING RECONSTITUTED BOMD HiODUCTS SUTHI HARNSOMJKRAM B.S.F., Unlveinsity of the Philippines, 1952 Presented in partial fulfillment of the requirements for the degree of Master of Forestry MONTANA STATE UNIVERSITY 1959 Approved Dean, Graduate School I 3 I960 Date UMI Number: EP34193 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent on the quality of the copy submitted. In the unlikely event that the author did not send a complete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. UMT " DlM«litionP«ibWfca ^ UMI EP34193 Copyright 2012 by ProQuest LLC. All rights reserved. This edition of the work is protected against unauthorized copying under Title 17, United States Code.
    [Show full text]
  • Wood Characteristics Today
    Wood Characteristics Today About 90% of all timber harvested in the United States comes from Private Land Only 10% comes from Government owned land Name the process of replanting small seedling trees as the mature trees are harvested? Reforestation Woods Natural Glue What natural adhesive material holds wood fibers together? Lignin New wood cells are formed in what layer? Draw and label the Photo to the right. Cambium When combined, the bands of springwood and summerwood form what? Annual Rings The age of most trees can be determined by counting the number of annual rings. Trees and lumber can be divided into what two main classes? A. Softwoods B. Hardwoods What is the scientific What is the scientific name for hardwood name for Softwood trees? trees? Deciduous Coniferous Softwood is a product of cone-bearing trees. Red Cedar The brilliant color, distinctive aroma and the moth- repelling qualities of Tennessee Red Cedar make this the ideal wood for chests and closet linings, or for the lining of chests made of other woods. Softwood is a product of cone-bearing trees. Pine Ponderosa Pine is a very large pine tree of variable habit native to western North America, but widespread throughout the temperate world. This softwood is known for its rustic, knotty appearance and is commonly seen in warm cabins in both the Sierra Nevada and Rocky Mountains. Softwood is a product of cone-bearing trees. Fir Mixed grain Douglas Fir is a resilient timber with a high strength to weight ratio. It has been widely used for various construction projects for centuries.
    [Show full text]
  • Modelling Mechanical Properties of Spruce and Douglas Fir Timber By
    Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purpose Joffrey Viguier, Damien Bourreau, Jean-François Bocquet, Guillaume Pot, Laurent Bléron, Jean-Denis Lanvin To cite this version: Joffrey Viguier, Damien Bourreau, Jean-François Bocquet, Guillaume Pot, Laurent Bléron, etal.. Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purpose. European Journal of Wood and Wood Products, Springer Verlag, 2017, 75 (4), pp.527-541. 10.1007/s00107-016-1149-4. hal-01530963 HAL Id: hal-01530963 https://hal.archives-ouvertes.fr/hal-01530963 Submitted on 1 Jun 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Distributed under a Creative Commons Attribution - ShareAlike| 4.0 International License Modelling mechanical properties of spruce and Douglas r timber by means of X-ray and grain angle measurements for strength grading purpose Jorey Viguier1∗, Damien Bourreau2, Jean-François Bocquet1, Guillaume
    [Show full text]
  • Wood & Veneer Care and Maintenance
    Materials Wood & Veneer Care and Maintenance Wood and veneer products are natural wood, requiring more attention than other surfaces. When properly cared for, it will last long and keep looking beautiful. To maintain the quality of your Herman Miller products, please follow the cleaning procedures outlined here. Wood & Veneer Stains Herman Miller products finished with wood, wood veneer, Herman Miller woods and veneers meet strict testing standards or recut wood veneer, except the oiled Eames Lounge and for resistance to wear, light, stains, water, and pressure. Ottoman with Rosewood, Oiled Walnut, or Oiled Santos Palisander veneer, and the Eames Sofa back panels with To reduce the risk of damage, take some precautions: Oiled Walnut, unless specifically noted. Use coasters for glasses and mugs. Routine Care If a glass top is added to the wood or veneer surface, be sure it Normal Cleaning rests on felt pads. Dust regularly with a slightly damp, soft, lint-free cloth. Don’t place a potted plant on a wood or veneer surface unless Wipe dry with a dry, soft cloth in the direction of the wood grain. it’s in a water-tight container or in a drip tray. Spills should be immediately wiped up with a damp cloth. Don’t let vinyl binders stay on a surface for very long. Use protective pads under equipment with “rubber” cushioning Once a month feet. Some chemical compounds used in the feet on office Clean the surface with a soft cloth dampened with a quality equipment, such as printers and monitor stands, may leave cleaner formulated for wood furniture.
    [Show full text]
  • ALTERNATIVE WOODS for GUITAR CONSTRUCTION
    ALTERNATIVE WOODS for GUITAR CONSTRUCTION and other string fretted instruments by DAVID A. G. FREEMAN Luthier Prepared for Lecture at Metiers d’art de lutherie Quebec City, Quebec February 24,2013 Alternative Woods My intent tonight is to discuss what is desired in a wood to make it suitable for Instrument construction. This is from my own experimenting and research as well as discussions with other Luthiers. In order to understand what might be desirable in alternative woods one must first understand what the properties of a traditional wood are that contribute to the acoustics of instruments. Then one might look for woods that have similar qualities to achieve similar responses. To this end there is more than one variable, so it is important to have a clear concept of the sound one wants to achieve before you start. The other aspect you want to understand is what you are trading away, be it in sound, or structure, or aesthetics versus what you are gaining by using another wood species. Perhaps economics may also be considered in this balance. We live in an age when all musicians are not connoisseurs of resonant tone wood and want a less expensive instrument to carry on tours or play on the street. The other end of this spectrum is a collector that wants incredibly figured woods that still deliver a good tone. So be aware of the purpose of your choice to use a wood not traditionally found on an instrument. This helps you accept any acoustic changes that might occur. Woods can be tested with some science though many of the properties become relative to other species.
    [Show full text]
  • Chapter 3--Physical Properties and Moisture Relations of Wood
    Chapter 3 Physical Properties and Moisture Relations of Wood William Simpson and Anton TenWolde he versatility of wood is demonstrated by a wide Contents variety of products. This variety is a result of a Appearance 3–1 spectrum of desirable physical characteristics or properties among the many species of wood. In many cases, Grain and Texture 3–1 more than one property of wood is important to the end Plainsawn and Quartersawn 3–2 product. For example, to select a wood species for a product, the value of appearance-type properties, such as texture, grain Decorative Features 3–2 pattern, or color, may be evaluated against the influence of Moisture Content 3–5 characteristics such as machinability, dimensional stability, Green Wood and Fiber Saturation Point 3–5 or decay resistance. Equilibrium Moisture Content 3–5 Wood exchanges moisture with air; the amount and direction of the exchange (gain or loss) depend on the relative humid- Sorption Hysteresis 3–7 ity and temperature of the air and the current amount of water Shrinkage 3–7 in the wood. This moisture relationship has an important Transverse and Volumetric 3–7 influence on wood properties and performance. This chapter discusses the physical properties of most interest in the Longitudinal 3–8 design of wood products. Moisture–Shrinkage Relationship 3–8 Some physical properties discussed and tabulated are influ- Weight, Density, and Specific Gravity 3–11 enced by species as well as variables like moisture content; Working Qualities 3–15 other properties tend to be independent of species. The thor- oughness of sampling and the degree of variability influence Decay Resistance 3–15 the confidence with which species-dependent properties are Thermal Properties 3–15 known.
    [Show full text]
  • WOOD VENEERS Bring the Warmth and Sophistication of Real Wood to Your Next Cab Interior Project
    Elevator Interior Panel and Ceiling Systems www.ECRcabs.com WOOD VENEERS Bring the warmth and sophistication of real wood to your next cab interior project. ECR has extensive experience working with wood veneer to help our clients achieve their desired design outcomes. We will work closely with you from initial selection through application to ensure your project meets your expectations and budget. Background Wood veneers and colours can have infinite permutations and vary from the exotics to the common, open or closed grain, hard or soft woods and a range of stain colors. Selection can be further complicated, and price increased with more exotic woods, desire for specific logs or flitch lots and complex layouts such as diagonal and diamond patterns. What follows is a good primer if you are considering a wood veneer finish and want to work within a reasonble budget: 1. Select a common hardwood with a Cut examples closed grain A readily available North American hard wood with a closed grain will reduce cost and make for a durable, even surface once installed. Examples of this type of wood include cherry, maple and walnut. 2. Select a cut Rotary Cut Quarter Cut The cut refers to how a slice of veneer is harvested from a log. Assembly examples Various cuts produce differing patterns and affects. Although we can accommodate specific cut requests, for most cabs we recommend selecting a quarter cut. 3. Choose the assembly method This is how the slices or cuts mentioned above are attached together to form a sheet. Examples of assembly methods are: Slip Match Slip, Random, and Book match.
    [Show full text]
  • Short Notes Figures of the Wood of Khaya Ivorensis and Millettia Laurentii
    WOOD RESEARCH 56 (4): 2011 613-620 SHORT NOTES FIGURES OF THE WOOD OF KHAYA IVORENSIS AND MILLETTIA LAURENTII Mirela Tulik Warsaw University of Life Sciences-Sggw, Faculty of Forestry Division of Forest Botany Warsaw Poland Teresa Kłosińska Warsaw University of Life Sciences-Sggw, Faculty of Wood Technology Warsaw Poland Muhammad Iqbal Hamdard University King Saud University Faculty of Science College of Food & Agricultural Sciences Department of Botany Department of Plant Production 110 062 New Delhi Post Box # 2460 India Riyadh 11451, Saudi Arabia Adam Grochowina Kampinoski National Park Izabelin Poland (Received April 2011) ABSTRACT This report describes the natural figures of wood samples collected from the main trunks of Khaya ivorensis A. Chev. and Millettia laurentii De Wild. trees. The figures have been analyzed in relation to such cambial growth events as the oriented cellular phenomena in the meristem and the changes taking place during wood cell differentiation. KEYWORDS: Khaya ivorensis, Millettia laurentii, oriented cambial events, storeyed cell arrangement, wood grains. 613 WOOD RESEARCH INTRODUCTION ‘Figure’ is a term, which is used in wood science to describe the appearance of longitudinal surfaces of wood, which is determined partly by the wood grain and partly by the cut and the innate properties of the wood. Wood grains emerge basically from the patterns of growth behavior of cambial cells and the subsequent processes taking place during wood cell differentiation. The different types of figures that appear in the wood are thus related, directly or indirectly, to the oriented morphogenetic events such as the anticlinal cambial cell divisions, intrusive growth of cell tips, elimination of initials, and the splitting and fusion of rays in the left (S) or right (Z) configuration, which are correlative to time and space and become visible on the tangential surface of the cambium (Hejnowicz 1990, 2002).
    [Show full text]
  • Wood Has a Grain
    THE WAY WOOD WORKS Everything you wanted to know about wood but didn't know what to ask. By Nick Engler ood is a cantankerous substance; there's no two ways about it. It's virtues, of course are legendary. It's attractive, abundant, and easy to work. Pound for pound, it's stronger than steel. W If properly finished and cared for it will last indefinitely. But none of that makes up for the fact that it's a complex — and often perplexing — building material. Unlike metals and plastics, whose properties are fairly consistent, wood is wholly inconsistent. It expands and contracts in all directions, but not at the same rate. It's stronger in one direction than it is in another. Its appearance changes not only from species to species, but from log to log — sometimes board to board. That being so, how can you possibly use this stuff to make a fine piece of furniture? Or a fine birdhouse, for that matter? To work wood — and have it work for you — you must understand three unique properties of wood that affect everything you make: • Wood has grain. • Wood moves more across the grain than along it. • Wood has more strength along the grain than across it. Sounds trite, I know. These are “everyone-knows-that” garden-variety facts. But there is more grist here for your woodworking mill than might first appear. Wood has grain As a tree grows, most of the wood cells align themselves with the axis of the trunk, limb, or root. These cells are composed of long, thin bundles of fibers, about 100 times longer than they are wide.
    [Show full text]
  • Wood Finishing Basics
    Wood Finishing Basics APPLICATION TECHNIQUES & PRODUCT SELECTION GETTING STARTED Your home is a unique expression of your individual Before starting any wood finishing project it is important decorating taste. And what better way to display your to have a proper workspace and supplies. When creating style than through the warmth and beauty of natural the ideal area please keep the following in mind: wood? From traditional to contemporary and everywhere • The work station must have adequate light. in-between, the possibilities are endless! Wood’s natural • Always work in a well ventilated area. warmth and beauty add richness and character. And with • The workspace should be dry and warm. If the area is ® a little know-how and Minwax stains and finishes, it’s cool or damp it may alter the dry times indicated on the easier than you think to create a statement of style. labels. In this guide, author and craftsman, Bruce Johnson, There are a number of items frequently used in wood pairs application tips and techniques with product finishing projects. This list does not include all the supplies needed, but what is most commonly used. recommendations that best enhance the beauty of wood Always consult the label of the Minwax® products you are in your home. This booklet will take you through the wood using to see if special application tools are required. finishing process including preparation, staining and topcoating, as well as maintenance of your wood pieces. Rags Stir Sticks Whether you are a beginner or a seasoned do-it-yourselfer, Brushes Safety Glasses these ideas will help you achieve beautiful results with ease.
    [Show full text]
  • Wood Byproducts
    Wood Byproducts 867. Absorption of calcium and magnesium by the 870. Alteration of soil temperature and moisture fruiting body of the cultivated mushroom Hypsizigus through mulching on the morpho-physiological marmoreus (Peck) bigelow from sawdust culture differentiation in maize. media. Awal, M. A. and Khan, M. A. H. Tabata, T. and Ogura, T. Pakistan Journal of Biological Sciences (Pakistan) 2(4): Journal of Food Science 68(1): 76-79. (2003); ISSN: 0022- 1164-1167. (Oct. 1999) 1147 NAL Call #: QH301 .P355; ISSN: 1028-8880. Descriptors: absorption/ calcium/ calcium carbonate/ Descriptors: mulching / soil/ wood waste/ maize calcium phosphates/ culture media/ growth/ magnesium/ Abstract: Mulching effects of sawdust, ash, rice straw and magnesium carbonate/ magnesium chloride/ magnesium water hyacinth on the morpho-physiological differentiation sulfate/ mycelium/ sawdust/ Basidiomycetes/ of maize (Zea mays L.) and to relate these with soil Basidiomycota/ calcium phosphate/ Hypsizygus/ environment were described. Water hyacinth and rice straw Hypsizygus marmoreus/ magnesium sulphate/ mulches had significant promotive effects on shoot Tricholomataceae elongation, root penetration, LAI and DM accumulation. All Abstract: H. marmoreus was cultivated in potato-sucrose- mulches conserved soil moisture but water hyacinth and agar (PSA) and in sawdust media supplemented with Ca or rice straw retained comparatively greater amount. Water Mg salts. The radial growth of mycelia was determined. The hyacinth and rice straw mulches reduced soil temperature mushroom spawn did not grow on PSA supplemented with fluctuations in all soil depths (5 to 15 cm) and retained Ca carbonate, Mg carbonate, or Mg hydroxide. However, higher soil temperatures at the early hours of the day (02 to the mycelia grew well on sawdust media supplemented with 06 hrs) which were considered to be the decisive factor for Ca phosphate, Ca carbonate, or Mg sulfate.
    [Show full text]
  • PB1767 Wood Protection for Log Home Owners
    $7.00 PB1767 Wood Protection for Log Home Owners Contents Basics of Wood 3 Wood Anatomy 3 Sapwood and Heartwood Wood Species Differences 4 Appearance Strength Wood and Water 5 Moisture Content of Wood and the Fiber Saturation Point Green Wood and Seasoning Hardwoods vs Softwoods Wood Shrinkage Kiln Drying Wood Deterioration 7 Physical and Mechanical Damage 7 Sunlight and Weathering Settling Checking Standing Dead Timber for Log Homes Fire Biological Damage 9 Insect Attack of Wood Fungal Attack of Wood Mold on Wood Non-microbial Stains Dry Rot Isn’t Dry Wood Protection for Log Homes 15 Importance of Keeping Wood Dry 15 Wood Preservatives 16 Sapstain Chemicals Restricted-use Preservatives Boron-based Preservatives Natural Durability Finishes 18 The Weathered Look — A Traditional Finish for Log Homes Application of Finishes & Refinishing The Durability Pyramid 19 Dry Design Careful Construction Durable Materials Inspection and Maintenance References 22 Wood Protection for Log Home Log homes can be beautiful and long-lasting. The most important factor in making your log home a Owners durable structure is a design that keeps the wood dry. Adam M. Taylor Assistant Professor the logs in a home always contain some amount of Tennessee Forest Products Center University of Tennessee water. The relationship of water and wood is the most important factor in determining the behavior Stephen L. Quarles of wood and how long it will last. In addition, lum- Wood Durability Advisor University of California Cooperative Extension ber and other wood-based products come from a wide range of tree species that have different prop- Karen M.
    [Show full text]